Ian Romanick [Thu, 3 Jan 2008 22:59:14 +0000 (14:59 -0800)]
Use EXTRA_LIB_PATH with *_LIB_DEPS
Make sure EXTRA_LIB_PATH is used with all the LIB_DEPS. Re-order some
of the options and tweak the whitespace to make the various LIB_DEPS
more readable. This makes building for Cell on x86 a bit easier and
doesn't seem to effect other builds.
Ian Romanick [Thu, 3 Jan 2008 22:57:07 +0000 (14:57 -0800)]
Remove unnecessary paths
Removing the paths on certain commands (e.g., ppu32-gcc) and removing
-I/usr/include makes it possible to build for Cell on both PowerPC and
x86 hosts.
Brian [Wed, 23 Jan 2008 23:19:40 +0000 (16:19 -0700)]
Cell: remove old test code
Brian [Wed, 23 Jan 2008 23:17:49 +0000 (16:17 -0700)]
Cell: asst. updates to sync up with today's earlier gallium changes
Brian [Wed, 23 Jan 2008 22:45:52 +0000 (15:45 -0700)]
gallium: remove support for separate depth/stencil buffers. Always combined now.
Brian [Wed, 23 Jan 2008 22:39:34 +0000 (15:39 -0700)]
gallium: in sp_tile_cache_clear() mark all cache slots as empty/free. Fixes progs/redbook/stencil.c
Brian [Wed, 23 Jan 2008 21:23:49 +0000 (14:23 -0700)]
gallium: rework compute_vertex_layout() to intelligently map vs outputs to fs inputs
Some follow-on simplification in prim setup is possible...
Brian [Wed, 23 Jan 2008 20:17:50 +0000 (13:17 -0700)]
gallium: restore/rewrite vbuf code for softpipe
Now based on the draw_vbuf code, instead being a custom one-off.
Disabled by default, enable with SP_VBUF env var.
Brian [Wed, 23 Jan 2008 19:48:41 +0000 (12:48 -0700)]
gallium: overhaul usage of vertex_info in draw module.
Remove all dependencies on vertex_info, except for draw_vbuf.
Drawing stages now strictly operate on post-transformed vertices and don't
know anything about hw vertices.
Use vertex program output info for two-side/flat/etc stages.
Temporarily disable vbuf module in softpipe driver.
Brian [Wed, 23 Jan 2008 16:27:39 +0000 (09:27 -0700)]
gallium: s/INTERP_NONE/INTERP_LINEAR/ to fix assertion with progs/samples/select.c
Brian [Wed, 23 Jan 2008 15:24:30 +0000 (08:24 -0700)]
gallium: fix computation of raster.point_size_per_vertex flag
Brian [Wed, 23 Jan 2008 15:24:08 +0000 (08:24 -0700)]
gallium: multiply vertex point size by 0.5
Brian [Wed, 23 Jan 2008 03:52:48 +0000 (20:52 -0700)]
gallium: use temp reg for storing color to avoid reading 'result.color'
Brian [Tue, 22 Jan 2008 23:37:19 +0000 (16:37 -0700)]
gallium: Don't allocate a vertex buffer until after setting the prim type.
The vertex size may depend on whether we're drawing points, lines or triangles.
José Fonseca [Tue, 22 Jan 2008 23:35:50 +0000 (16:35 -0700)]
added stipple_destroy()
Brian [Tue, 22 Jan 2008 17:16:30 +0000 (10:16 -0700)]
gallium: Added FORMAT_1F_PSIZE to insert constant point size into vertices
Also, added draw_convert_wide_points/lines() so a driver can tell the draw
module whether to convert wide points/lines into triangles, or just pass
them through.
Brian [Tue, 22 Jan 2008 04:19:24 +0000 (21:19 -0700)]
gallium: silence warnings
Brian [Tue, 22 Jan 2008 04:15:43 +0000 (21:15 -0700)]
Cell: initial support for sampler state
Brian [Tue, 22 Jan 2008 03:54:38 +0000 (20:54 -0700)]
Cell: s/cell_init_surface_funcs/cell_init_surface_functions/
Brian [Tue, 22 Jan 2008 03:53:23 +0000 (20:53 -0700)]
Cell: Added cell_surface.[ch] files
Brian [Tue, 22 Jan 2008 03:51:03 +0000 (20:51 -0700)]
gallium: remove unneeded protos, #includes, etc
Brian [Tue, 22 Jan 2008 03:50:39 +0000 (20:50 -0700)]
gallium: include sp_headers.h
Brian [Tue, 22 Jan 2008 03:31:36 +0000 (20:31 -0700)]
Cell: renamed cell_surface.[ch] to cell_clear.[ch]
Brian [Tue, 22 Jan 2008 03:31:16 +0000 (20:31 -0700)]
Cell: rename cell_surface.[ch] cell_clear.[ch]
Brian [Tue, 22 Jan 2008 03:26:40 +0000 (20:26 -0700)]
Cell: Add initial texture functions
Brian [Tue, 22 Jan 2008 03:25:44 +0000 (20:25 -0700)]
Cell: add cell_set_sampler_texture()
Brian [Tue, 22 Jan 2008 03:23:48 +0000 (20:23 -0700)]
gallium: move softpipe_get_tex_surface() prototype
Brian [Tue, 22 Jan 2008 03:16:13 +0000 (20:16 -0700)]
gallium: add license comment
Brian [Tue, 22 Jan 2008 03:14:22 +0000 (20:14 -0700)]
gallium: move softpipe_get_tex_surface() into sp_texture.c
Brian [Tue, 22 Jan 2008 02:25:10 +0000 (19:25 -0700)]
Cell: added asmfiles rule
Brian [Mon, 21 Jan 2008 22:29:54 +0000 (15:29 -0700)]
gallium: prototype draw_linestipple.c replaced by draw_stipple.c
Brian [Mon, 21 Jan 2008 21:10:16 +0000 (14:10 -0700)]
gallium: remove per-fragment line stipple code
Brian [Mon, 21 Jan 2008 21:08:20 +0000 (14:08 -0700)]
gallium: new 'draw' stage for line stipple
Stippled lines are converted into a series of shorter line segments
Brian [Mon, 21 Jan 2008 18:37:58 +0000 (11:37 -0700)]
fix broken point rendering in sp_vbuf_render()
Brian [Mon, 21 Jan 2008 18:16:22 +0000 (11:16 -0700)]
gallium: add a src_index[] array to draw's vertex_info for mapping post-xform vertex attribs to hw vertex attribs
Brian [Mon, 21 Jan 2008 00:39:07 +0000 (17:39 -0700)]
Cell: use tile_t for color tile
Brian [Mon, 21 Jan 2008 00:27:05 +0000 (17:27 -0700)]
Cell: clean-up/re-org tile code
Also, support 16 or 32-bit Z buffer at runtime.
Brian [Sun, 20 Jan 2008 22:00:18 +0000 (15:00 -0700)]
Cell: use depth/stencil state to enable ztest
Move z-test code into do_depth_test().
Add ZSIZE symbol to support 2 or 4-byte Z values.
Brian [Sun, 20 Jan 2008 21:58:29 +0000 (14:58 -0700)]
enable call to cell_emit_state()
Brian [Sat, 19 Jan 2008 19:04:06 +0000 (12:04 -0700)]
Cell: improve "finished copying batch buffer" signalling.
When the SPU is done copying a batch buffer to local store, use an mfc_put()
to write a "done" message back to the buffer status array in main memory.
We were previously using a mailbox message for synchronization.
Brian [Fri, 18 Jan 2008 19:47:20 +0000 (12:47 -0700)]
s/varible/variable/
Brian [Fri, 18 Jan 2008 19:45:55 +0000 (12:45 -0700)]
set param type to PROGRAM_CONSTANT when parsing immediates
Brian [Fri, 18 Jan 2008 19:45:27 +0000 (12:45 -0700)]
use PROGRAM_CONSTANT instead of PROGRAM_STATE_VAR when generating immediates/literals
Michel Dänzer [Fri, 18 Jan 2008 18:08:30 +0000 (19:08 +0100)]
Unify copy_rect helpers.
Some of the copies were buggy.
José Fonseca [Thu, 17 Jan 2008 08:20:46 +0000 (17:20 +0900)]
Revert "temporarily don't emit TGSI immediates, use the constant buffer"
This reverts commit
310e7ca44b33558a9aa22f43024d1bfb63642128.
José Fonseca [Thu, 17 Jan 2008 04:39:14 +0000 (13:39 +0900)]
Back-port miscellaneous fixes from internal branch (mostly portability fixes).
These are changes that are in our internal branch, but somehow were skipped
so far. It was done using visual comparison of the branches --
it is likely that changes are being carried on the wrong way
José Fonseca [Thu, 17 Jan 2008 04:37:17 +0000 (13:37 +0900)]
gallium: Pass PIPE_BUFFER_USAGE_PIXEL to buffer_data.
José Fonseca [Thu, 17 Jan 2008 02:00:51 +0000 (11:00 +0900)]
gallium: Handle TGSI_OPCODE_END on sse2.
Brian [Thu, 17 Jan 2008 00:21:05 +0000 (17:21 -0700)]
temporarily don't emit TGSI immediates, use the constant buffer
This allows a few more programs to run and not crash.
Need to get constant buffer uploads working...
José Fonseca [Tue, 18 Dec 2007 22:19:40 +0000 (22:19 +0000)]
gallium: Fix cut-n-paste error.
José Fonseca [Tue, 18 Dec 2007 22:01:35 +0000 (22:01 +0000)]
gallium: Alternative mm_bufmgr_create_from_buffer constructor for mm pool managers.
José Fonseca [Tue, 18 Dec 2007 18:59:49 +0000 (18:59 +0000)]
gallium: Detect if a null buffer is passed.
Keith Whitwell [Mon, 17 Dec 2007 12:03:51 +0000 (12:03 +0000)]
gallium: fix warning
Keith Whitwell [Mon, 17 Dec 2007 11:59:02 +0000 (11:59 +0000)]
gallium: fix warning
Keith Whitwell [Fri, 14 Dec 2007 15:51:07 +0000 (15:51 +0000)]
gallium: hardwire reset_temps functionality
Keith Whitwell [Fri, 14 Dec 2007 15:50:06 +0000 (15:50 +0000)]
gallium: whitespace changes
José Fonseca [Fri, 14 Dec 2007 16:37:10 +0000 (16:37 +0000)]
gallium: Ignore generated files.
Brian [Wed, 16 Jan 2008 23:43:50 +0000 (16:43 -0700)]
use NEGATE_X/Y/Z/W tokens
Brian [Wed, 16 Jan 2008 23:43:36 +0000 (16:43 -0700)]
clean-up swizzle fields in fog code, fix NegateBase
Brian [Wed, 16 Jan 2008 23:31:37 +0000 (16:31 -0700)]
Fix broken fog.
Note that fogcoord and front-facing attribs are in the same register, in the
X and Y channels, respectively.
Brian [Wed, 16 Jan 2008 23:29:36 +0000 (16:29 -0700)]
Fix incorrect [0,1] clamping in store_dest().
Brian [Wed, 16 Jan 2008 20:55:08 +0000 (13:55 -0700)]
tweaks to quad drawing, set UsesKill in bitmap shader
Brian [Wed, 16 Jan 2008 20:54:32 +0000 (13:54 -0700)]
copy UsesKill state in _mesa_combine_programs()
Brian [Wed, 16 Jan 2008 17:57:53 +0000 (10:57 -0700)]
vbuf updates/fixes (KeithW)
Plus, update i915 and Cell drivers for latest vbuf->draw() params.
Brian [Wed, 16 Jan 2008 17:57:10 +0000 (10:57 -0700)]
s/DBG/DRAW_DBG
Brian [Wed, 16 Jan 2008 17:56:38 +0000 (10:56 -0700)]
remove useless assertions
Brian [Wed, 16 Jan 2008 17:56:23 +0000 (10:56 -0700)]
init front/back color attrib indexes to 0, not -1
Brian [Wed, 16 Jan 2008 15:30:00 +0000 (08:30 -0700)]
Fix a two-sided lighting bug (fixes samples/wave.c)
Brian [Wed, 16 Jan 2008 01:32:51 +0000 (18:32 -0700)]
typedef uintptr_t for non-HAVE_POSIX_MEMALIGN build
Brian [Wed, 16 Jan 2008 01:27:14 +0000 (18:27 -0700)]
Don't include stdint.h or inttypes. Use the uint64 typedef instead of uint64_t.
Brian [Wed, 16 Jan 2008 01:26:21 +0000 (18:26 -0700)]
replace _mesa_printf() with fprintf()
Brian [Wed, 16 Jan 2008 01:22:35 +0000 (18:22 -0700)]
remove redundant llvm subdir
Brian [Wed, 16 Jan 2008 01:22:23 +0000 (18:22 -0700)]
include pipe/draw/draw_context.h
Brian [Tue, 15 Jan 2008 21:18:17 +0000 (14:18 -0700)]
Add surface status/clear_value fields, PIPE_SURFACE_STATUS_x tokens
Brian [Tue, 15 Jan 2008 02:18:35 +0000 (19:18 -0700)]
free stvp->draw_shader
Brian [Tue, 15 Jan 2008 02:12:46 +0000 (19:12 -0700)]
Fix problems with vertex shaders and the private draw module.
The CSO returned by pipe->create_vs_state() can't be passed to the
private draw module. That was causing glRasterPos to blow up.
Add a 'draw_shader' field to st_vertex_program for use with the private
draw module.
Change st_context->state.vs type from cso_vertex_shader to st_vertex_program.
Brian [Tue, 15 Jan 2008 02:04:45 +0000 (19:04 -0700)]
disable debug printf
Brian [Mon, 14 Jan 2008 23:39:26 +0000 (16:39 -0700)]
Cell: after sending a batch, wait for a DMA completion signal.
This fixes sporadic rendering glitches.
Using a mailbox msg for now, until spe_mfcio_tag_status_read() or similar
is found to work.
Brian [Mon, 14 Jan 2008 23:37:13 +0000 (16:37 -0700)]
clamp colors during float->int conversion
Brian [Mon, 14 Jan 2008 18:11:08 +0000 (11:11 -0700)]
Cell: update surface map code to match recent changes in pipe_surface struct
Michel Dänzer [Mon, 14 Jan 2008 15:17:01 +0000 (16:17 +0100)]
Remove pipe->get/put_tile_rgba.
pipe_get/put_tile_rgba() now use pipe->get/put_tile internally.
Also simplify the <format>_get/put_tile_rgba() helper functions and clean up
some inconsitencies in them.
Michel Dänzer [Thu, 10 Jan 2008 16:44:04 +0000 (17:44 +0100)]
Remove mapping fields from struct pipe_surface.
It's now the responsibility of surface users to keep track of their mappings.
Brian [Sat, 12 Jan 2008 23:58:50 +0000 (16:58 -0700)]
Cell: remove fb parameter to get/put_tile()
Brian [Sat, 12 Jan 2008 23:57:55 +0000 (16:57 -0700)]
Cell: disable cell_emit_state() for now
Brian [Sat, 12 Jan 2008 19:53:49 +0000 (12:53 -0700)]
Cell: collect vars in a spu_global struct
Brian [Sat, 12 Jan 2008 19:39:26 +0000 (12:39 -0700)]
Cell: first state object (depth/stencil/alpha) emitted to SPUs
Brian [Sat, 12 Jan 2008 18:41:23 +0000 (11:41 -0700)]
Cell: whitespace/cleanup
Brian [Sat, 12 Jan 2008 17:33:50 +0000 (10:33 -0700)]
Cell: prefix SPU files with spu_
Brian [Sat, 12 Jan 2008 17:33:24 +0000 (10:33 -0700)]
Cell: prefix SPU sources with spu_
Brian [Sat, 12 Jan 2008 17:06:27 +0000 (10:06 -0700)]
Cell: sketch out needed rasterizer state
Brian [Fri, 11 Jan 2008 23:32:20 +0000 (16:32 -0700)]
s/int/uint/ to silence warnings
Brian [Fri, 11 Jan 2008 23:31:58 +0000 (16:31 -0700)]
whitespace, comment changes
Brian [Fri, 11 Jan 2008 23:08:53 +0000 (16:08 -0700)]
Cell: basic batch buffer working
Brian [Fri, 11 Jan 2008 19:04:55 +0000 (12:04 -0700)]
Cell: initial work for a hw-like batch buffer system
Brian [Fri, 11 Jan 2008 18:35:03 +0000 (11:35 -0700)]
Cell: remove obsolete cell_prim_buffer struct and code
Brian [Fri, 11 Jan 2008 18:31:03 +0000 (11:31 -0700)]
Cell: debug code, comments
Brian [Fri, 11 Jan 2008 18:30:02 +0000 (11:30 -0700)]
vbuf_flush_vertices() instead of vbuf_flush_indices() in vbuf_end()
Brian [Fri, 11 Jan 2008 18:27:24 +0000 (11:27 -0700)]
Cell: reformattting
Brian [Fri, 11 Jan 2008 18:27:09 +0000 (11:27 -0700)]
s/int/uint/ to silence warning
Brian [Fri, 11 Jan 2008 17:10:45 +0000 (10:10 -0700)]
Fix malloc size buf, silence signed/unsigned comparision warning