From 09c0bc7a8dedb674bd1890476f30ba4d83d4e73e Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Fri, 23 Jun 2017 17:56:08 +0530 Subject: [PATCH] board: Add support for Engicam GEAM6UL SOM Add initial support for Engicam GEAM6UL SOM board with below features: - U-Boot 2017.07-rc1 - Linux 4.11.5 - Default packages from buildroot Signed-off-by: Jagan Teki [Thomas: add host-dosfstools and host-mtools.] Signed-off-by: Thomas Petazzoni --- .gitlab-ci.yml | 1 + DEVELOPERS | 1 + board/engicam/geam6ul/genimage.cfg | 38 +++++++++++++++ board/engicam/geam6ul/readme.txt | 66 +++++++++++++++++++++++++++ configs/engicam_imx6ul_geam_defconfig | 43 +++++++++++++++++ 5 files changed, 149 insertions(+) create mode 100644 board/engicam/geam6ul/genimage.cfg create mode 100644 board/engicam/geam6ul/readme.txt create mode 100644 configs/engicam_imx6ul_geam_defconfig diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index 28e0773f57..d14ca2748b 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -91,6 +91,7 @@ csky_gx6605s_defconfig: *defconfig cubieboard2_defconfig: *defconfig engicam_imx6qdl_icore_defconfig: *defconfig engicam_imx6qdl_icore_rqs_defconfig: *defconfig +engicam_imx6ul_geam_defconfig: *defconfig firefly_rk3288_defconfig: *defconfig firefly_rk3288_demo_defconfig: *defconfig freescale_imx28evk_defconfig: *defconfig diff --git a/DEVELOPERS b/DEVELOPERS index 237cd0b53e..6171da41a3 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -845,6 +845,7 @@ N: Jagan Teki F: board/engicam/ F: configs/engicam_imx6qdl_icore_defconfig F: configs/engicam_imx6qdl_icore_rqs_defconfig +F: configs/engicam_imx6ul_geam_defconfig N: James Knight F: package/atkmm/ diff --git a/board/engicam/geam6ul/genimage.cfg b/board/engicam/geam6ul/genimage.cfg new file mode 100644 index 0000000000..fcca6e1739 --- /dev/null +++ b/board/engicam/geam6ul/genimage.cfg @@ -0,0 +1,38 @@ +image boot.vfat { + vfat { + files = { + "uImage", + "imx6ul-geam-kit.dtb" + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition SPL { + in-partition-table = "no" + image = "SPL" + offset = 1024 + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot-dtb.img" + offset = 69K + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 8M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext2" + } +} diff --git a/board/engicam/geam6ul/readme.txt b/board/engicam/geam6ul/readme.txt new file mode 100644 index 0000000000..ace993a661 --- /dev/null +++ b/board/engicam/geam6ul/readme.txt @@ -0,0 +1,66 @@ +******************************************** +Buildroot for Engicam GEAM6UL SOM platforms: +******************************************** + +This file documents the Buildroot support for all Engicam GEAM6UL +SOM platform boards. + +GEAM6UL SOM Starter kits: +https://www.engicam.com/vis-prod/101115 + +This configuration uses U-Boot mainline and kernel mainline. + +Build +===== + +First, configure Buildroot for the Engicam GEAM6UL SOM: + +- for GEAM6UL SOM: + + make engicam_imx6ul_geam_defconfig + +Build all components: + + make + +You will find the following files in output/images/: + - imx6ul-geam-kit.dtb + - rootfs.ext4 + - rootfs.tar + - sdcard.img + - SPL + - u-boot-dtb.img + - uImage + +Create a bootable SD card +========================= + +To determine the device associated to the SD card have a look in the +/proc/partitions file: + + cat /proc/partitions + +Buildroot prepares a bootable "sdcard.img" image in the output/images/ +directory, ready to be dumped on a SD card. Launch the following +command as root: + + dd if=output/images/sdcard.img of=/dev/ + sync + +*** WARNING! This will destroy all the card content. Use with care! *** + +For details about the medium image layout, see the definition in +board/engicam/geam6ul/genimage.cfg + +Boot the GEAM6UL boards with SD boot: +==================================== + +To boot your newly created system: +- insert the SD card in the SD slot of the board; +- connect 3-wire RS232 serial port J28 on board, and connect with other + serial end or USB cable(if serial-to-usb converter used) using + a terminal emulator at 115200 bps, 8n1; +- close JM3 for sd boot. +- power on the board. + +Enjoy! diff --git a/configs/engicam_imx6ul_geam_defconfig b/configs/engicam_imx6ul_geam_defconfig new file mode 100644 index 0000000000..aac8432ef2 --- /dev/null +++ b/configs/engicam_imx6ul_geam_defconfig @@ -0,0 +1,43 @@ +BR2_arm=y +BR2_cortex_a9=y +BR2_ARM_ENABLE_NEON=y +BR2_ARM_ENABLE_VFP=y +BR2_ARM_FPU_VFPV3=y + +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y + +# System +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07-rc1" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6ul_geam_mmc" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="SPL" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5" +BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" +BR2_LINUX_KERNEL_UIMAGE=y +BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x80008000" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ul-geam-kit" + +# Filesystem +BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam GEAM6UL Starter Kit" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/geam6ul/genimage.cfg" -- 2.30.2