From 0be303cacc41283d2da85be2e6b9d3fdd6d5caf0 Mon Sep 17 00:00:00 2001 From: Simon Dawson Date: Sat, 31 May 2014 08:55:35 +0100 Subject: [PATCH] replace references to Busybox with BusyBox The correct capitalised form appears to be "BusyBox" rather than "Busybox"; fix all references to the latter form. (Most such references occur in the manual and in commentary in package makefiles.) Signed-off-by: Simon Dawson Signed-off-by: Peter Korsgaard --- Makefile | 2 +- docs/manual/common-usage.txt | 4 ++-- docs/manual/configure.txt | 16 ++++++++-------- docs/manual/customize-busybox-config.txt | 4 ++-- docs/manual/customize-store.txt | 4 ++-- docs/manual/using-buildroot-development.txt | 4 ++-- docs/manual/using.txt | 2 +- ...-libbb-use-poll.h-instead-of-sys-poll.h.patch | 2 +- package/busybox/busybox.mk | 2 +- package/coreutils/Config.in | 2 +- package/openvpn/openvpn.mk | 2 +- package/pkg-utils.mk | 2 +- package/rsyslog/rsyslog.mk | 2 +- package/sysklogd/sysklogd.mk | 2 +- package/sysvinit/inittab | 2 +- package/sysvinit/sysvinit.mk | 4 ++-- package/xbmc/br-xbmc | 4 ++-- system/Config.in | 2 +- 18 files changed, 31 insertions(+), 31 deletions(-) diff --git a/Makefile b/Makefile index 9dc24d7452..0b4264a5d5 100644 --- a/Makefile +++ b/Makefile @@ -89,7 +89,7 @@ CONFIG_DIR := $(TOPDIR) NEED_WRAPPER = else # other packages might also support Linux-style out of tree builds -# with the O= syntax (E.G. Busybox does). As make automatically +# with the O= syntax (E.G. BusyBox does). As make automatically # forwards command line variable definitions those packages get very # confused. Fix this by telling make to not do so MAKEOVERRIDES = diff --git a/docs/manual/common-usage.txt b/docs/manual/common-usage.txt index 772982af5c..16a13512c2 100644 --- a/docs/manual/common-usage.txt +++ b/docs/manual/common-usage.txt @@ -76,9 +76,9 @@ to +make+ or set in the environment: is the recommended way of setting it. + * +BUSYBOX_CONFIG_FILE=+, path to - the Busybox configuration file. + the BusyBox configuration file. + - Note that the Busybox configuration file can also be set from the + Note that the BusyBox configuration file can also be set from the configuration interface, so through the Buildroot +.config+ file; this is the recommended way of setting it. + diff --git a/docs/manual/configure.txt b/docs/manual/configure.txt index eb8cb1d7e0..16b9cd6f2d 100644 --- a/docs/manual/configure.txt +++ b/docs/manual/configure.txt @@ -272,7 +272,7 @@ different solutions to handle the +/dev+ directory : requirement to have +CONFIG_DEVTMPFS+ and +CONFIG_DEVTMPFS_MOUNT+ enabled in the kernel configuration still apply), but adds the +mdev+ userspace utility on top of it. +mdev+ is a program part of - Busybox that the kernel will call every time a device is added or + BusyBox that the kernel will call every time a device is added or removed. Thanks to the +/etc/mdev.conf+ configuration file, +mdev+ can be configured to for example, set specific permissions or ownership on a device file, call a script or application whenever a @@ -314,16 +314,16 @@ graphical applications, other network servers, etc.). Buildroot allows to use three different types of init systems, which can be chosen from +System configuration+, +Init system+: - * The first solution is *Busybox*. Amongst many programs, Busybox has + * The first solution is *BusyBox*. Amongst many programs, BusyBox has an implementation of a basic +init+ program, which is sufficient for most embedded systems. Enabling the +BR2_INIT_BUSYBOX+ will - ensure Busybox will build and install its +init+ program. This is - the default solution in Buildroot. The Busybox +init+ program will + ensure BusyBox will build and install its +init+ program. This is + the default solution in Buildroot. The BusyBox +init+ program will read the +/etc/inittab+ file at boot to know what to do. The syntax of this file can be found in http://git.busybox.net/busybox/tree/examples/inittab (note that - Busybox +inittab+ syntax is special: do not use a random +inittab+ - documentation from the Internet to learn about Busybox + BusyBox +inittab+ syntax is special: do not use a random +inittab+ + documentation from the Internet to learn about BusyBox +inittab+). The default +inittab+ in Buildroot is stored in +system/skeleton/etc/inittab+. Apart from mounting a few important filesystems, the main job the default inittab does is to start the @@ -336,7 +336,7 @@ can be chosen from +System configuration+, +Init system+: Linux distributions, until they switched to more recent alternatives such as Upstart or Systemd. +sysvinit+ also works with an +inittab+ file (which has a slightly different syntax than the - one from Busybox). The default +inittab+ installed with this init + one from BusyBox). The default +inittab+ installed with this init solution is located in +package/sysvinit/inittab+. * The third solution is *systemd*. +systemd+ is the new generation @@ -353,5 +353,5 @@ can be chosen from +System configuration+, +Init system+: http://www.freedesktop.org/wiki/Software/systemd. The solution recommended by Buildroot developers is to use the -*Busybox init* as it is sufficient for most embedded +*BusyBox init* as it is sufficient for most embedded systems. *systemd* can be used for more complex situations. diff --git a/docs/manual/customize-busybox-config.txt b/docs/manual/customize-busybox-config.txt index ca1613d9ee..a4a85fa55f 100644 --- a/docs/manual/customize-busybox-config.txt +++ b/docs/manual/customize-busybox-config.txt @@ -2,9 +2,9 @@ // vim: set syntax=asciidoc: [[busybox-custom]] -=== Customizing the Busybox configuration +=== Customizing the BusyBox configuration -http://www.busybox.net/[Busybox] is very configurable, and you may +http://www.busybox.net/[BusyBox] is very configurable, and you may want to customize it. You can follow these simple steps to do so. This method isn't optimal, but it's simple, and it works: diff --git a/docs/manual/customize-store.txt b/docs/manual/customize-store.txt index 6db8ec7812..e51edb2660 100644 --- a/docs/manual/customize-store.txt +++ b/docs/manual/customize-store.txt @@ -80,9 +80,9 @@ work. To do so, you need to create a normal Buildroot configuration that builds a basic system for the hardware: toolchain, kernel, bootloader, -filesystem and a simple Busybox-only userspace. No specific package +filesystem and a simple BusyBox-only userspace. No specific package should be selected: the configuration should be as minimal as -possible, and should only build a working basic Busybox system for the +possible, and should only build a working basic BusyBox system for the target platform. You can of course use more complicated configurations for your internal projects, but the Buildroot project will only integrate basic board configurations. This is because package diff --git a/docs/manual/using-buildroot-development.txt b/docs/manual/using-buildroot-development.txt index 2ecff35250..e660e65e5f 100644 --- a/docs/manual/using-buildroot-development.txt +++ b/docs/manual/using-buildroot-development.txt @@ -72,7 +72,7 @@ make linux-rebuild all ----------------------- and in a matter of seconds gets the updated Linux kernel image in -+output/images+. Similarly, a change can be made to the Busybox source ++output/images+. Similarly, a change can be made to the BusyBox source code in +/home/bob/busybox+, and after: ----------------------- @@ -80,4 +80,4 @@ make busybox-rebuild all ----------------------- the root filesystem image in +output/images+ contains the updated -Busybox. +BusyBox. diff --git a/docs/manual/using.txt b/docs/manual/using.txt index 3cd149936a..292349d12d 100644 --- a/docs/manual/using.txt +++ b/docs/manual/using.txt @@ -5,7 +5,7 @@ Buildroot has a nice configuration tool similar to the one you can find in the http://www.kernel.org/[Linux kernel] or in -http://www.busybox.net/[Busybox]. Note that you can *and should build +http://www.busybox.net/[BusyBox]. Note that you can *and should build everything as a normal user*. There is no need to be root to configure and use Buildroot. The first step is to run the configuration assistant: diff --git a/package/busybox/1.21.1/0001-libbb-use-poll.h-instead-of-sys-poll.h.patch b/package/busybox/1.21.1/0001-libbb-use-poll.h-instead-of-sys-poll.h.patch index 089d85817e..0a39d56223 100644 --- a/package/busybox/1.21.1/0001-libbb-use-poll.h-instead-of-sys-poll.h.patch +++ b/package/busybox/1.21.1/0001-libbb-use-poll.h-instead-of-sys-poll.h.patch @@ -5,7 +5,7 @@ Subject: [PATCH 1/3] libbb: use instead of As the pol() manpage recommends, include the header instead of . This allows to get rid of gazillions of warnings when -building Busybox against the musl C library, which prints a warning +building BusyBox against the musl C library, which prints a warning when the internal header is included directly instead of the header. diff --git a/package/busybox/busybox.mk b/package/busybox/busybox.mk index 150100b978..af1d13f7ec 100644 --- a/package/busybox/busybox.mk +++ b/package/busybox/busybox.mk @@ -22,7 +22,7 @@ BUSYBOX_LDFLAGS = \ $(TARGET_LDFLAGS) # Link against libtirpc if available so that we can leverage its RPC -# support for NFS mounting with Busybox +# support for NFS mounting with BusyBox ifeq ($(BR2_PACKAGE_LIBTIRPC),y) BUSYBOX_DEPENDENCIES += libtirpc BUSYBOX_CFLAGS += -I$(STAGING_DIR)/usr/include/tirpc/ diff --git a/package/coreutils/Config.in b/package/coreutils/Config.in index 152ad14c22..eee041d633 100644 --- a/package/coreutils/Config.in +++ b/package/coreutils/Config.in @@ -5,7 +5,7 @@ config BR2_PACKAGE_COREUTILS help All of the basic file/text/shell utilities. These are the core utilities which are expected to exist on every system. - Busybox implements many of the most common. + BusyBox implements many of the most common. Things like: - chmod, cp, dd, dir, ls, etc... diff --git a/package/openvpn/openvpn.mk b/package/openvpn/openvpn.mk index 0355678fb0..3cb78a5022 100644 --- a/package/openvpn/openvpn.mk +++ b/package/openvpn/openvpn.mk @@ -20,7 +20,7 @@ OPENVPN_CONF_OPT += --enable-small --disable-plugins \ --disable-debug --disable-eurephia endif -# Busybox 1.21+ places the ip applet in the "correct" place +# BusyBox 1.21+ places the ip applet in the "correct" place # but previous versions didn't. ifeq ($(BR2_PACKAGE_IPROUTE2),y) OPENVPN_CONF_ENV += IPROUTE=/sbin/ip diff --git a/package/pkg-utils.mk b/package/pkg-utils.mk index c627a6485e..163ef8a07c 100644 --- a/package/pkg-utils.mk +++ b/package/pkg-utils.mk @@ -29,7 +29,7 @@ $(eval $(call caseconvert-helper,LOWERCASE,$(join $(addsuffix :,$([TO])),$([FROM # # Manipulation of .config files based on the Kconfig -# infrastructure. Used by the Busybox package, the Linux kernel +# infrastructure. Used by the BusyBox package, the Linux kernel # package, and more. # diff --git a/package/rsyslog/rsyslog.mk b/package/rsyslog/rsyslog.mk index 88747b752b..240f04eaa4 100644 --- a/package/rsyslog/rsyslog.mk +++ b/package/rsyslog/rsyslog.mk @@ -14,7 +14,7 @@ RSYSLOG_AUTORECONF = YES RSYSLOG_CONF_OPT = --disable-testbench \ --enable-cached-man-pages -# Build after Busybox +# Build after BusyBox ifeq ($(BR2_PACKAGE_BUSYBOX),y) RSYSLOG_DEPENDENCIES += busybox endif diff --git a/package/sysklogd/sysklogd.mk b/package/sysklogd/sysklogd.mk index c0aaf34915..886e471d3e 100644 --- a/package/sysklogd/sysklogd.mk +++ b/package/sysklogd/sysklogd.mk @@ -9,7 +9,7 @@ SYSKLOGD_SOURCE = sysklogd_$(SYSKLOGD_VERSION).orig.tar.gz SYSKLOGD_PATCH = sysklogd_$(SYSKLOGD_VERSION)-6.diff.gz SYSKLOGD_SITE = $(BR2_DEBIAN_MIRROR)/debian/pool/main/s/sysklogd -# Override Busybox implementations if Busybox is enabled. +# Override BusyBox implementations if BusyBox is enabled. ifeq ($(BR2_PACKAGE_BUSYBOX),y) SYSKLOGD_DEPENDENCIES = busybox endif diff --git a/package/sysvinit/inittab b/package/sysvinit/inittab index c85e75a045..8812cca297 100644 --- a/package/sysvinit/inittab +++ b/package/sysvinit/inittab @@ -1,7 +1,7 @@ # /etc/inittab # # This inittab is a basic inittab sample for sysvinit, which mimics -# Buildroot's default inittab for Busybox. +# Buildroot's default inittab for BusyBox. id:1:initdefault: proc::sysinit:/bin/mount -t proc proc /proc diff --git a/package/sysvinit/sysvinit.mk b/package/sysvinit/sysvinit.mk index 5d4f4bca7c..371624356b 100644 --- a/package/sysvinit/sysvinit.mk +++ b/package/sysvinit/sysvinit.mk @@ -11,7 +11,7 @@ SYSVINIT_SITE = $(BR2_DEBIAN_MIRROR)/debian/pool/main/s/sysvinit SYSVINIT_LICENSE = GPLv2+ SYSVINIT_LICENSE_FILES = COPYING -# Override Busybox implementations if Busybox is enabled. +# Override BusyBox implementations if BusyBox is enabled. ifeq ($(BR2_PACKAGE_BUSYBOX),y) SYSVINIT_DEPENDENCIES = busybox endif @@ -34,7 +34,7 @@ define SYSVINIT_INSTALL_TARGET_CMDS for x in halt init shutdown killall5; do \ install -D -m 0755 $(@D)/src/$$x $(TARGET_DIR)/sbin/$$x || exit 1; \ done - # Override Busybox's inittab with an inittab compatible with + # Override BusyBox's inittab with an inittab compatible with # sysvinit install -D -m 0644 package/sysvinit/inittab $(TARGET_DIR)/etc/inittab ln -sf /sbin/halt $(TARGET_DIR)/sbin/reboot diff --git a/package/xbmc/br-xbmc b/package/xbmc/br-xbmc index 2a62b31bb6..922b5111b9 100755 --- a/package/xbmc/br-xbmc +++ b/package/xbmc/br-xbmc @@ -15,10 +15,10 @@ trap trap_kill INT QUIT TERM LOOP=1 while [ ${LOOP} -eq 1 ]; do - # Hack: Busybox ash does not catch signals while a non-builtin + # Hack: BusyBox ash does not catch signals while a non-builtin # is running, and only catches the signal when the non-builtin # command ends. So, we just background the XBMC binary, and wait - # for it. But Busybox' ash's wait builtin does not return the + # for it. But BusyBox' ash's wait builtin does not return the # exit code even if there was only one job (which is correct # for POSIX). So we explicitly wait for the XBMC job "${XBMC}" "${@}" & diff --git a/system/Config.in b/system/Config.in index a3d80bffda..53bca536c6 100644 --- a/system/Config.in +++ b/system/Config.in @@ -77,7 +77,7 @@ choice default BR2_INIT_BUSYBOX config BR2_INIT_BUSYBOX - bool "Busybox" + bool "BusyBox" select BR2_PACKAGE_BUSYBOX config BR2_INIT_SYSV -- 2.30.2