From 0be56dca27ff8bc88580052b185e4fd430384527 Mon Sep 17 00:00:00 2001 From: Jan Viktorin Date: Tue, 20 Oct 2015 13:32:25 +0200 Subject: [PATCH] altera: remove whitespace before colon Signed-off-by: Jan Viktorin Signed-off-by: Thomas Petazzoni --- board/altera/readme.txt | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/board/altera/readme.txt b/board/altera/readme.txt index ddd9e03e5f..1894a7907d 100644 --- a/board/altera/readme.txt +++ b/board/altera/readme.txt @@ -15,8 +15,8 @@ https://www.altera.com/products/boards_and_kits/dev-kits/altera/kit-cyclone-v-so How it works ============ -Boot process : --------------- +Boot process: +------------- In summary, the bootloader has multiple stages, an hardcoded boot routine is loaded from an on-chip ROM. @@ -28,15 +28,15 @@ loaded from an on-chip ROM. which will load the u-boot image. - Then the u-boot image will load the Linux kernel. -A good source of information for the boot process is : +A good source of information for the boot process is: http://xillybus.com/tutorials/u-boot-image-altera-soc -Note for the SPL : +Note for the SPL: The SPL generated by the u-boot from Rocketboards doesn't seems to work, therefore we provide a patch for {uboot-PKG}/board/altera/socfpga_cyclone5/* based on the files generated with the Altera example design. -For more information about this files please look at : +For more information about this files please look at: http://www.rocketboards.org/foswiki/Documentation/PreloaderUbootCustomization#Common_Source_Code How to build it @@ -46,11 +46,11 @@ Configure Buildroot ------------------- The altera_sockit_defconfig configuration is a minimal configuration with -all that is required to bring the SoCkit : +all that is required to bring the SoCkit: $ make altera_sockit_defconfig -and for the SoC Development Board : +and for the SoC Development Board: $ make altera_sockdk_defconfig @@ -84,7 +84,7 @@ Signing the Preloader *** BEWARE **** The u-boot-spl.bin must be signed using the Altera's tool "mkpimage". This tool comes as a part of the Altera development environnment (SoC EDS). -A fork of this tool have been done by Maxime Hadjinlian and can be found here : +A fork of this tool have been done by Maxime Hadjinlian and can be found here: https://github.com/maximeh/mkpimage Remember that without signing the u-boot-spl.bin, the board will not boot !!! @@ -94,17 +94,17 @@ Remember that without signing the u-boot-spl.bin, the board will not boot !!! Prepare your SDcard =================== -A good source of information for the partitioning process is : +A good source of information for the partitioning process is: http://www.rocketboards.org/foswiki/view/Projects/SoCKitLinaroLinuxDesktop#Partition_the_SD_Card Create the SDcard partition table ---------------------------------- -Determine the device associated to the SD card : +Determine the device associated to the SD card: $ cat /proc/partitions -let's assume it is /dev/mmcblk0 : +let's assume it is /dev/mmcblk0: $ sudo fdisk /dev/mmcblk0 @@ -115,7 +115,7 @@ using these options, pressing enter after each one: * n p 2 4096 +4496384K t 83 * n p 3 2048 +1024K t 3 a2 -Using the 'p' option, the SD card's partition must look like this : +Using the 'p' option, the SD card's partition must look like this: Device Boot Start End Blocks Id System /dev/mmcblk0p1 9000000 9041919 20960 b W95 FAT32 @@ -124,32 +124,32 @@ Device Boot Start End Blocks Id System Then write the partition table using 'w' and exit. -Make partition one a DOS partition : +Make partition one a DOS partition: $ sudo mkdosfs /dev/mmcblk0p1 Install the binaries to the SDcard ---------------------------------- -Remember your binaries are located in output/images/, go inside that directory : +Remember your binaries are located in output/images/, go inside that directory: $ cd output/images The partition with type a2 is the partition scan by the first bootloader stage in the SoCkit ROM to find the next bootloader stage so we must write the signed -preloader and the u-boot binaries in that partition : +preloader and the u-boot binaries in that partition: $ sudo dd if=u-boot-spl-signed.bin of=/dev/mmcblk0p3 bs=64k seek=0 $ sudo dd if=u-boot.img of=/dev/mmcblk0p3 bs=64k seek=4 -Copy the Linux kernel and its Device tree : +Copy the Linux kernel and its Device tree: $ sudo mkdir /mnt/sdcard $ sudo mount /dev/mmcblk0p1 /mnt/sdcard $ sudo cp socfpga.dtb uImage /mnt/sdcard $ sudo umount /mnt/sdcard -Copy the rootfs : +Copy the rootfs: $ sudo dd if=rootfs.ext2 of=/dev/mmcblk0p2 bs=64k $ sudo sync -- 2.30.2