From 11f330ed223f524cbbdbe2433599990a69b8f380 Mon Sep 17 00:00:00 2001 From: SergeyDegtyar Date: Tue, 3 Sep 2019 11:53:37 +0300 Subject: [PATCH] Add tests for ECP5 architecture --- Makefile | 1 + tests/ecp5/.gitignore | 2 + tests/ecp5/add_sub.v | 13 + tests/ecp5/add_sub.ys | 8 + tests/ecp5/adffs.v | 91 ++ tests/ecp5/adffs.ys | 10 + tests/ecp5/alu.v | 19 + tests/ecp5/alu.ys | 11 + tests/ecp5/counter.v | 17 + tests/ecp5/counter.ys | 11 + tests/ecp5/dffs.v | 37 + tests/ecp5/dffs.ys | 9 + tests/ecp5/div_mod.v | 13 + tests/ecp5/div_mod.ys | 12 + tests/ecp5/dpram.v | 23 + tests/ecp5/dpram.ys | 18 + tests/ecp5/dpram_synth.v | 165 +++ tests/ecp5/fsm.v | 73 ++ tests/ecp5/fsm.ys | 13 + tests/ecp5/latches.v | 58 + tests/ecp5/latches.ys | 17 + tests/ecp5/latches_synth.v | 109 ++ tests/ecp5/logic.v | 18 + tests/ecp5/logic.ys | 7 + tests/ecp5/macc.v | 25 + tests/ecp5/macc.ys | 15 + tests/ecp5/memory.v | 21 + tests/ecp5/memory.ys | 21 + tests/ecp5/memory_synth.v | 2121 ++++++++++++++++++++++++++++++++++++ tests/ecp5/mul.v | 11 + tests/ecp5/mul.ys | 11 + tests/ecp5/mux.v | 100 ++ tests/ecp5/mux.ys | 11 + tests/ecp5/rom.v | 18 + tests/ecp5/rom.ys | 9 + tests/ecp5/run-test.sh | 20 + tests/ecp5/shifter.v | 22 + tests/ecp5/shifter.ys | 9 + tests/ecp5/tribuf.v | 23 + tests/ecp5/tribuf.ys | 9 + 40 files changed, 3201 insertions(+) create mode 100644 tests/ecp5/.gitignore create mode 100644 tests/ecp5/add_sub.v create mode 100644 tests/ecp5/add_sub.ys create mode 100644 tests/ecp5/adffs.v create mode 100644 tests/ecp5/adffs.ys create mode 100644 tests/ecp5/alu.v create mode 100644 tests/ecp5/alu.ys create mode 100644 tests/ecp5/counter.v create mode 100644 tests/ecp5/counter.ys create mode 100644 tests/ecp5/dffs.v create mode 100644 tests/ecp5/dffs.ys create mode 100644 tests/ecp5/div_mod.v create mode 100644 tests/ecp5/div_mod.ys create mode 100644 tests/ecp5/dpram.v create mode 100644 tests/ecp5/dpram.ys create mode 100644 tests/ecp5/dpram_synth.v create mode 100644 tests/ecp5/fsm.v create mode 100644 tests/ecp5/fsm.ys create mode 100644 tests/ecp5/latches.v create mode 100644 tests/ecp5/latches.ys create mode 100644 tests/ecp5/latches_synth.v create mode 100644 tests/ecp5/logic.v create mode 100644 tests/ecp5/logic.ys create mode 100644 tests/ecp5/macc.v create mode 100644 tests/ecp5/macc.ys create mode 100644 tests/ecp5/memory.v create mode 100644 tests/ecp5/memory.ys create mode 100644 tests/ecp5/memory_synth.v create mode 100644 tests/ecp5/mul.v create mode 100644 tests/ecp5/mul.ys create mode 100644 tests/ecp5/mux.v create mode 100644 tests/ecp5/mux.ys create mode 100644 tests/ecp5/rom.v create mode 100644 tests/ecp5/rom.ys create mode 100755 tests/ecp5/run-test.sh create mode 100644 tests/ecp5/shifter.v create mode 100644 tests/ecp5/shifter.ys create mode 100644 tests/ecp5/tribuf.v create mode 100644 tests/ecp5/tribuf.ys diff --git a/Makefile b/Makefile index 2cac80f0f..d4f1d3d68 100644 --- a/Makefile +++ b/Makefile @@ -710,6 +710,7 @@ test: $(TARGETS) $(EXTRA_TARGETS) +cd tests/aiger && bash run-test.sh $(ABCOPT) +cd tests/arch && bash run-test.sh +cd tests/ice40 && bash run-test.sh $(SEEDOPT) + +cd tests/ecp5 && bash run-test.sh $(SEEDOPT) @echo "" @echo " Passed \"make test\"." @echo "" diff --git a/tests/ecp5/.gitignore b/tests/ecp5/.gitignore new file mode 100644 index 000000000..1d329c933 --- /dev/null +++ b/tests/ecp5/.gitignore @@ -0,0 +1,2 @@ +*.log +/run-test.mk diff --git a/tests/ecp5/add_sub.v b/tests/ecp5/add_sub.v new file mode 100644 index 000000000..177c32e30 --- /dev/null +++ b/tests/ecp5/add_sub.v @@ -0,0 +1,13 @@ +module top +( + input [3:0] x, + input [3:0] y, + + output [3:0] A, + output [3:0] B + ); + +assign A = x + y; +assign B = x - y; + +endmodule diff --git a/tests/ecp5/add_sub.ys b/tests/ecp5/add_sub.ys new file mode 100644 index 000000000..03aec6694 --- /dev/null +++ b/tests/ecp5/add_sub.ys @@ -0,0 +1,8 @@ +read_verilog add_sub.v +hierarchy -top top +equiv_opt -assert -map +/ecp5/cells_sim.v synth_ecp5 # equivalency check +design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design) +cd top # Constrain all select calls below inside the top module +select -assert-count 10 t:LUT4 +select -assert-none t:LUT4 %% t:* %D + diff --git a/tests/ecp5/adffs.v b/tests/ecp5/adffs.v new file mode 100644 index 000000000..93c8bf52c --- /dev/null +++ b/tests/ecp5/adffs.v @@ -0,0 +1,91 @@ +module adff + ( input d, clk, clr, output reg q ); + initial begin + q = 0; + end + always @( posedge clk, posedge clr ) + if ( clr ) + q <= 1'b0; + else + q <= d; +endmodule + +module adffn + ( input d, clk, clr, output reg q ); + initial begin + q = 0; + end + always @( posedge clk, negedge clr ) + if ( !clr ) + q <= 1'b0; + else + q <= d; +endmodule + +module dffsr + ( input d, clk, pre, clr, output reg q ); + initial begin + q = 0; + end + always @( posedge clk, posedge pre, posedge clr ) + if ( clr ) + q <= 1'b0; + else if ( pre ) + q <= 1'b1; + else + q <= d; +endmodule + +module ndffnsnr + ( input d, clk, pre, clr, output reg q ); + initial begin + q = 0; + end + always @( negedge clk, negedge pre, negedge clr ) + if ( !clr ) + q <= 1'b0; + else if ( !pre ) + q <= 1'b1; + else + q <= d; +endmodule + +module top ( +input clk, +input clr, +input pre, +input a, +output b,b1,b2,b3 +); + +dffsr u_dffsr ( + .clk (clk ), + .clr (clr), + .pre (pre), + .d (a ), + .q (b ) + ); + +ndffnsnr u_ndffnsnr ( + .clk (clk ), + .clr (clr), + .pre (pre), + .d (a ), + .q (b1 ) + ); + +adff u_adff ( + .clk (clk ), + .clr (clr), + .d (a ), + .q (b2 ) + ); + +adffn u_adffn ( + .clk (clk ), + .clr (clr), + .d (a ), + .q (b3 ) + ); + +endmodule diff --git a/tests/ecp5/adffs.ys b/tests/ecp5/adffs.ys new file mode 100644 index 000000000..7ec2b0114 --- /dev/null +++ b/tests/ecp5/adffs.ys @@ -0,0 +1,10 @@ +read_verilog adffs.v +proc +async2sync # converts async flops to a 'sync' variant clocked by a 'super'-clock +flatten +equiv_opt -assert -map +/ecp5/cells_sim.v synth_ecp5 # equivalency check +design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design) +cd top # Constrain all select calls below inside the top module +select -assert-count 4 t:TRELLIS_FF +select -assert-count 7 t:LUT4 +select -assert-none t:TRELLIS_FF t:LUT4 %% t:* %D diff --git a/tests/ecp5/alu.v b/tests/ecp5/alu.v new file mode 100644 index 000000000..f82cc2e21 --- /dev/null +++ b/tests/ecp5/alu.v @@ -0,0 +1,19 @@ +module top ( + input clock, + input [31:0] dinA, dinB, + input [2:0] opcode, + output reg [31:0] dout +); + always @(posedge clock) begin + case (opcode) + 0: dout <= dinA + dinB; + 1: dout <= dinA - dinB; + 2: dout <= dinA >> dinB; + 3: dout <= $signed(dinA) >>> dinB; + 4: dout <= dinA << dinB; + 5: dout <= dinA & dinB; + 6: dout <= dinA | dinB; + 7: dout <= dinA ^ dinB; + endcase + end +endmodule diff --git a/tests/ecp5/alu.ys b/tests/ecp5/alu.ys new file mode 100644 index 000000000..bd859efc4 --- /dev/null +++ b/tests/ecp5/alu.ys @@ -0,0 +1,11 @@ +read_verilog alu.v +hierarchy -top top +proc +flatten +equiv_opt -assert -map +/ice40/cells_sim.v synth_ice40 # equivalency check +design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design) +cd top # Constrain all select calls below inside the top module +select -assert-count 62 t:SB_CARRY +select -assert-count 32 t:SB_DFF +select -assert-count 655 t:SB_LUT4 +select -assert-none t:SB_CARRY t:SB_DFF t:SB_LUT4 %% t:* %D diff --git a/tests/ecp5/counter.v b/tests/ecp5/counter.v new file mode 100644 index 000000000..52852f8ac --- /dev/null +++ b/tests/ecp5/counter.v @@ -0,0 +1,17 @@ +module top ( +out, +clk, +reset +); + output [7:0] out; + input clk, reset; + reg [7:0] out; + + always @(posedge clk, posedge reset) + if (reset) begin + out <= 8'b0 ; + end else + out <= out + 1; + + +endmodule diff --git a/tests/ecp5/counter.ys b/tests/ecp5/counter.ys new file mode 100644 index 000000000..c65c21622 --- /dev/null +++ b/tests/ecp5/counter.ys @@ -0,0 +1,11 @@ +read_verilog counter.v +hierarchy -top top +proc +flatten +equiv_opt -map +/ice40/cells_sim.v synth_ice40 # equivalency check +design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design) +cd top # Constrain all select calls below inside the top module +select -assert-count 6 t:SB_CARRY +select -assert-count 8 t:SB_DFFR +select -assert-count 8 t:SB_LUT4 +select -assert-none t:SB_CARRY t:SB_DFFR t:SB_LUT4 %% t:* %D diff --git a/tests/ecp5/dffs.v b/tests/ecp5/dffs.v new file mode 100644 index 000000000..d97840c43 --- /dev/null +++ b/tests/ecp5/dffs.v @@ -0,0 +1,37 @@ +module dff + ( input d, clk, output reg q ); + always @( posedge clk ) + q <= d; +endmodule + +module dffe + ( input d, clk, en, output reg q ); + initial begin + q = 0; + end + always @( posedge clk ) + if ( en ) + q <= d; +endmodule + +module top ( +input clk, +input en, +input a, +output b,b1, +); + +dff u_dff ( + .clk (clk ), + .d (a ), + .q (b ) + ); + +dffe u_ndffe ( + .clk (clk ), + .en (en), + .d (a ), + .q (b1 ) + ); + +endmodule diff --git a/tests/ecp5/dffs.ys b/tests/ecp5/dffs.ys new file mode 100644 index 000000000..5510bb440 --- /dev/null +++ b/tests/ecp5/dffs.ys @@ -0,0 +1,9 @@ +read_verilog dffs.v +hierarchy -top top +proc +flatten +equiv_opt -assert -map +/ecp5/cells_sim.v synth_ecp5 # equivalency check +design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design) +cd top # Constrain all select calls below inside the top module +select -assert-count 2 t:TRELLIS_FF +select -assert-none t:TRELLIS_FF %% t:* %D diff --git a/tests/ecp5/div_mod.v b/tests/ecp5/div_mod.v new file mode 100644 index 000000000..64a36707d --- /dev/null +++ b/tests/ecp5/div_mod.v @@ -0,0 +1,13 @@ +module top +( + input [3:0] x, + input [3:0] y, + + output [3:0] A, + output [3:0] B + ); + +assign A = x % y; +assign B = x / y; + +endmodule diff --git a/tests/ecp5/div_mod.ys b/tests/ecp5/div_mod.ys new file mode 100644 index 000000000..fb13be5d5 --- /dev/null +++ b/tests/ecp5/div_mod.ys @@ -0,0 +1,12 @@ +read_verilog div_mod.v +hierarchy -top top +flatten +equiv_opt -assert -map +/ecp5/cells_sim.v synth_ecp5 # equivalency check +design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design) +cd top # Constrain all select calls below inside the top module + +select -assert-count 28 t:CCU2C +select -assert-count 48 t:L6MUX21 +select -assert-count 194 t:LUT4 +select -assert-count 84 t:PFUMX +select -assert-none t:LUT4 t:CCU2C t:L6MUX21 t:PFUMX %% t:* %D diff --git a/tests/ecp5/dpram.v b/tests/ecp5/dpram.v new file mode 100644 index 000000000..3ea4c1f27 --- /dev/null +++ b/tests/ecp5/dpram.v @@ -0,0 +1,23 @@ +/* +Example from: https://www.latticesemi.com/-/media/LatticeSemi/Documents/UserManuals/EI/iCEcube201701UserGuide.ashx?document_id=52071 [p. 72]. +*/ +module top (din, write_en, waddr, wclk, raddr, rclk, dout); +parameter addr_width = 8; +parameter data_width = 8; +input [addr_width-1:0] waddr, raddr; +input [data_width-1:0] din; +input write_en, wclk, rclk; +output [data_width-1:0] dout; +reg [data_width-1:0] dout; +reg [data_width-1:0] mem [(1< run-test.mk +exec ${MAKE:-make} -f run-test.mk diff --git a/tests/ecp5/shifter.v b/tests/ecp5/shifter.v new file mode 100644 index 000000000..c55632552 --- /dev/null +++ b/tests/ecp5/shifter.v @@ -0,0 +1,22 @@ +module top ( +out, +clk, +in +); + output [7:0] out; + input signed clk, in; + reg signed [7:0] out = 0; + + always @(posedge clk) + begin +`ifndef BUG + out <= out >> 1; + out[7] <= in; +`else + + out <= out << 1; + out[7] <= in; +`endif + end + +endmodule diff --git a/tests/ecp5/shifter.ys b/tests/ecp5/shifter.ys new file mode 100644 index 000000000..47d95d298 --- /dev/null +++ b/tests/ecp5/shifter.ys @@ -0,0 +1,9 @@ +read_verilog shifter.v +hierarchy -top top +proc +flatten +equiv_opt -assert -map +/ice40/cells_sim.v synth_ice40 # equivalency check +design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design) +cd top # Constrain all select calls below inside the top module +select -assert-count 8 t:SB_DFF +select -assert-none t:SB_DFF %% t:* %D diff --git a/tests/ecp5/tribuf.v b/tests/ecp5/tribuf.v new file mode 100644 index 000000000..870a02584 --- /dev/null +++ b/tests/ecp5/tribuf.v @@ -0,0 +1,23 @@ +module tristate (en, i, o); + input en; + input i; + output o; + + assign o = en ? i : 1'bz; + +endmodule + + +module top ( +input en, +input a, +output b +); + +tristate u_tri ( + .en (en ), + .i (a ), + .o (b ) + ); + +endmodule diff --git a/tests/ecp5/tribuf.ys b/tests/ecp5/tribuf.ys new file mode 100644 index 000000000..f454a0c02 --- /dev/null +++ b/tests/ecp5/tribuf.ys @@ -0,0 +1,9 @@ +read_verilog tribuf.v +hierarchy -top top +proc +flatten +equiv_opt -assert -map +/ecp5/cells_sim.v -map +/simcells.v synth_ecp5 # equivalency check +design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design) +cd top # Constrain all select calls below inside the top module +select -assert-count 1 t:$_TBUF_ +select -assert-none t:$_TBUF_ %% t:* %D -- 2.30.2