From 11ffa379ab6c9b8a477e45a3ac390f7d60ef6b19 Mon Sep 17 00:00:00 2001 From: Andreas Sandberg Date: Sun, 16 Mar 2014 17:40:58 +0100 Subject: [PATCH] kvm: Clean up signal handling KVM used to use two signals, one for instruction count exits and one for timer exits. There is really no need to distinguish between the two since they only trigger exits from KVM. This changeset unifies and renames the signals and adds a method, kick(), that can be used to raise the control signal in the vCPU thread. It also removes the early timer warning since we do not normally see if the signal was delivered. --HG-- extra : rebase_source : cd0e45ca90894c3d6f6aa115b9b06a1d8f0fda4d --- src/cpu/kvm/base.cc | 80 +++++++++++++++------------------------------ src/cpu/kvm/base.hh | 22 +++++++++---- 2 files changed, 42 insertions(+), 60 deletions(-) diff --git a/src/cpu/kvm/base.cc b/src/cpu/kvm/base.cc index 1149a3704..8ba9f944e 100644 --- a/src/cpu/kvm/base.cc +++ b/src/cpu/kvm/base.cc @@ -63,8 +63,6 @@ /* Used by some KVM macros */ #define PAGE_SIZE pageSize -static volatile __thread bool timerOverflowed = false; - BaseKvmCPU::BaseKvmCPU(BaseKvmCPUParams *params) : BaseCPU(params), vm(*params->kvmVM), @@ -178,6 +176,8 @@ BaseKvmCPU::startupThread() const BaseKvmCPUParams * const p( dynamic_cast(params())); + vcpuThread = pthread_self(); + // Setup signal handlers. This has to be done after the vCPU is // created since it manipulates the vCPU signal mask. setupSignalHandler(); @@ -186,11 +186,11 @@ BaseKvmCPU::startupThread() if (p->usePerfOverflow) runTimer.reset(new PerfKvmTimer(hwCycles, - KVM_TIMER_SIGNAL, + KVM_KICK_SIGNAL, p->hostFactor, p->hostFreq)); else - runTimer.reset(new PosixKvmTimer(KVM_TIMER_SIGNAL, CLOCK_MONOTONIC, + runTimer.reset(new PosixKvmTimer(KVM_KICK_SIGNAL, CLOCK_MONOTONIC, p->hostFactor, p->hostFreq)); @@ -607,7 +607,6 @@ BaseKvmCPU::kvmRun(Tick ticks) { Tick ticksExecuted; DPRINTF(KvmRun, "KVM: Executing for %i ticks\n", ticks); - timerOverflowed = false; if (ticks == 0) { // Settings ticks == 0 is a special case which causes an entry @@ -617,16 +616,18 @@ BaseKvmCPU::kvmRun(Tick ticks) ++numVMHalfEntries; - // This signal is always masked while we are executing in gem5 - // and gets unmasked temporarily as soon as we enter into + // Send a KVM_KICK_SIGNAL to the vCPU thread (i.e., this + // thread). The KVM control signal is masked while executing + // in gem5 and gets unmasked temporarily as when entering // KVM. See setSignalMask() and setupSignalHandler(). - raise(KVM_TIMER_SIGNAL); + kick(); - // Enter into KVM. KVM will check for signals after completing - // pending operations (IO). Since the KVM_TIMER_SIGNAL is - // pending, this forces an immediate exit into gem5 again. We + // Start the vCPU. KVM will check for signals after completing + // pending operations (IO). Since the KVM_KICK_SIGNAL is + // pending, this forces an immediate exit to gem5 again. We // don't bother to setup timers since this shouldn't actually - // execute any code in the guest. + // execute any code (other than completing half-executed IO + // instructions) in the guest. ioctlRun(); // We always execute at least one cycle to prevent the @@ -659,27 +660,18 @@ BaseKvmCPU::kvmRun(Tick ticks) if (!perfControlledByTimer) hwCycles.stop(); - // The timer signal may have been delivered after we exited + // The control signal may have been delivered after we exited // from KVM. It will be pending in that case since it is // masked when we aren't executing in KVM. Discard it to make // sure we don't deliver it immediately next time we try to // enter into KVM. - discardPendingSignal(KVM_TIMER_SIGNAL); - discardPendingSignal(KVM_INST_SIGNAL); + discardPendingSignal(KVM_KICK_SIGNAL); const uint64_t hostCyclesExecuted(getHostCycles() - baseCycles); const uint64_t simCyclesExecuted(hostCyclesExecuted * hostFactor); const uint64_t instsExecuted(hwInstructions.read() - baseInstrs); ticksExecuted = runTimer->ticksFromHostCycles(hostCyclesExecuted); - if (ticksExecuted < ticks && - timerOverflowed && - _kvmRun->exit_reason == KVM_EXIT_INTR) { - // TODO: We should probably do something clever here... - warn("KVM: Early timer event, requested %i ticks but got %i ticks.\n", - ticks, ticksExecuted); - } - /* Update statistics */ numCycles += simCyclesExecuted;; numInsts += instsExecuted; @@ -1065,10 +1057,9 @@ BaseKvmCPU::flushCoalescedMMIO() } /** - * Cycle timer overflow when running in KVM. Forces the KVM syscall to - * exit with EINTR and allows us to run the event queue. + * Dummy handler for KVM kick signals. * - * @warn This function might not be called since some kernels don't + * @note This function is usually not called since the kernel doesn't * seem to deliver signals when the signal is only unmasked when * running in KVM. This doesn't matter though since we are only * interested in getting KVM to exit, which happens as expected. See @@ -1076,18 +1067,7 @@ BaseKvmCPU::flushCoalescedMMIO() * handling. */ static void -onTimerOverflow(int signo, siginfo_t *si, void *data) -{ - timerOverflowed = true; -} - -/** - * Instruction counter overflow when running in KVM. Forces the KVM - * syscall to exit with EINTR and allows us to handle instruction - * count events. - */ -static void -onInstEvent(int signo, siginfo_t *si, void *data) +onKickSignal(int signo, siginfo_t *si, void *data) { } @@ -1097,33 +1077,25 @@ BaseKvmCPU::setupSignalHandler() struct sigaction sa; memset(&sa, 0, sizeof(sa)); - sa.sa_sigaction = onTimerOverflow; + sa.sa_sigaction = onKickSignal; sa.sa_flags = SA_SIGINFO | SA_RESTART; - if (sigaction(KVM_TIMER_SIGNAL, &sa, NULL) == -1) + if (sigaction(KVM_KICK_SIGNAL, &sa, NULL) == -1) panic("KVM: Failed to setup vCPU timer signal handler\n"); - memset(&sa, 0, sizeof(sa)); - sa.sa_sigaction = onInstEvent; - sa.sa_flags = SA_SIGINFO | SA_RESTART; - if (sigaction(KVM_INST_SIGNAL, &sa, NULL) == -1) - panic("KVM: Failed to setup vCPU instruction signal handler\n"); - sigset_t sigset; if (pthread_sigmask(SIG_BLOCK, NULL, &sigset) == -1) panic("KVM: Failed get signal mask\n"); // Request KVM to setup the same signal mask as we're currently - // running with except for the KVM control signals. We'll - // sometimes need to raise the KVM_TIMER_SIGNAL to cause immediate - // exits from KVM after servicing IO requests. See kvmRun(). - sigdelset(&sigset, KVM_TIMER_SIGNAL); - sigdelset(&sigset, KVM_INST_SIGNAL); + // running with except for the KVM control signal. We'll sometimes + // need to raise the KVM_KICK_SIGNAL to cause immediate exits from + // KVM after servicing IO requests. See kvmRun(). + sigdelset(&sigset, KVM_KICK_SIGNAL); setSignalMask(&sigset); // Mask our control signals so they aren't delivered unless we're // actually executing inside KVM. - sigaddset(&sigset, KVM_TIMER_SIGNAL); - sigaddset(&sigset, KVM_INST_SIGNAL); + sigaddset(&sigset, KVM_KICK_SIGNAL); if (pthread_sigmask(SIG_SETMASK, &sigset, NULL) == -1) panic("KVM: Failed mask the KVM control signals\n"); } @@ -1266,7 +1238,7 @@ BaseKvmCPU::setupInstCounter(uint64_t period) hwCycles); if (period) - hwInstructions.enableSignals(KVM_INST_SIGNAL); + hwInstructions.enableSignals(KVM_KICK_SIGNAL); activeInstPeriod = period; } diff --git a/src/cpu/kvm/base.hh b/src/cpu/kvm/base.hh index 8191d9d92..b987f6a3e 100644 --- a/src/cpu/kvm/base.hh +++ b/src/cpu/kvm/base.hh @@ -40,8 +40,10 @@ #ifndef __CPU_KVM_BASE_HH__ #define __CPU_KVM_BASE_HH__ -#include +#include + #include +#include #include "base/statistics.hh" #include "cpu/kvm/perfevent.hh" @@ -50,11 +52,8 @@ #include "cpu/base.hh" #include "cpu/simple_thread.hh" -/** Signal to use to trigger time-based exits from KVM */ -#define KVM_TIMER_SIGNAL SIGRTMIN - -/** Signal to use to trigger instruction-based exits from KVM */ -#define KVM_INST_SIGNAL (SIGRTMIN+1) +/** Signal to use to trigger exits from KVM */ +#define KVM_KICK_SIGNAL SIGRTMIN // forward declarations class ThreadContext; @@ -114,6 +113,14 @@ class BaseKvmCPU : public BaseCPU /** Dump the internal state to the terminal. */ virtual void dump(); + /** + * Force an exit from KVM. + * + * Send a signal to the thread owning this vCPU to get it to exit + * from KVM. Ignored if the vCPU is not executing. + */ + void kick() const { pthread_kill(vcpuThread, KVM_KICK_SIGNAL); } + /** * A cached copy of a thread's state in the form of a SimpleThread * object. @@ -585,6 +592,9 @@ class BaseKvmCPU : public BaseCPU /** KVM internal ID of the vCPU */ const long vcpuID; + /** ID of the vCPU thread */ + pthread_t vcpuThread; + private: struct TickEvent : public Event { -- 2.30.2