From 128fe8ac264f57c1e0df23c22333b0c9d52a8f8d Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 10 Jul 2020 19:04:37 +1000 Subject: [PATCH] dcache: Ease timing on wishbone data and byte selects This eliminates a path where the inputs to r1.wb.dat and r1.wb.sel depend on req_op, which depends on the TLB and cache hit detection. In fact they only need to depend on the nature of the request in r0.req (i.e. DCBZ, store, cacheable load, or non-cacheable load). This sets them at the beginning of the code for IDLE state rather than inside the req_op case statement. Signed-off-by: Paul Mackerras --- dcache.vhdl | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/dcache.vhdl b/dcache.vhdl index 08b1664..956768c 100644 --- a/dcache.vhdl +++ b/dcache.vhdl @@ -1250,8 +1250,18 @@ begin req.mmu_req := r0.mmu_req; req.dcbz := r0.req.dcbz; req.real_addr := ra; - req.data := r0.req.data; - req.byte_sel := r0.req.byte_sel; + -- Force data to 0 for dcbz + if r0.req.dcbz = '0' then + req.data := r0.req.data; + else + req.data := (others => '0'); + end if; + -- Select all bytes for dcbz and for cacheable loads + if r0.req.dcbz = '1' or (r0.req.load = '1' and r0.req.nc = '0') then + req.byte_sel := (others => '1'); + else + req.byte_sel := r0.req.byte_sel; + end if; req.hit_way := req_hit_way; req.same_tag := req_same_tag; @@ -1268,7 +1278,9 @@ begin case r1.state is when IDLE => r1.wb.adr <= req.real_addr(r1.wb.adr'left downto 0); - r1.dcbz <= '0'; + r1.wb.sel <= req.byte_sel; + r1.wb.dat <= req.data; + r1.dcbz <= req.dcbz; -- Keep track of our index and way for subsequent stores. r1.store_index <= get_index(req.real_addr); @@ -1298,7 +1310,6 @@ begin " tag:" & to_hstring(get_tag(req.real_addr)); -- Start the wishbone cycle - r1.wb.sel <= (others => '1'); r1.wb.we <= '0'; r1.wb.cyc <= '1'; r1.wb.stb <= '1'; @@ -1308,7 +1319,6 @@ begin r1.write_tag <= '1'; when OP_LOAD_NC => - r1.wb.sel <= req.byte_sel; r1.wb.cyc <= '1'; r1.wb.stb <= '1'; r1.wb.we <= '0'; @@ -1316,8 +1326,6 @@ begin when OP_STORE_HIT | OP_STORE_MISS => if req.dcbz = '0' then - r1.wb.sel <= req.byte_sel; - r1.wb.dat <= req.data; r1.state <= STORE_WAIT_ACK; r1.acks_pending <= to_unsigned(1, 3); r1.full <= '0'; @@ -1333,17 +1341,10 @@ begin else -- dcbz is handled much like a load miss except -- that we are writing to memory instead of reading - - -- Start the wishbone writes - r1.wb.sel <= (others => '1'); - r1.wb.dat <= (others => '0'); - - -- Handle the rest like a load miss r1.state <= RELOAD_WAIT_ACK; if req.op = OP_STORE_MISS then r1.write_tag <= '1'; end if; - r1.dcbz <= '1'; end if; r1.wb.we <= '1'; r1.wb.cyc <= '1'; -- 2.30.2