From 197da6286612df9c0c1b5f41e307e1a9be780d0d Mon Sep 17 00:00:00 2001 From: Dagg Stompler Date: Sat, 18 Apr 2020 18:10:16 +0300 Subject: [PATCH] board/hardkernel/odroidc2: remove unused files Commit b80712a16ae3deb65331a7923aa878e13e2e66b6 ("configs/odroidc2: remove the defconfig") has removed the odroidc2 defconfig, but left behind a number of files in board/hardkernel/odroidc2, which are now unused. Let's remove them. Signed-off-by: Dagg Stompler Signed-off-by: Thomas Petazzoni --- board/hardkernel/odroidc2/boot.ini | 176 ------------------------ board/hardkernel/odroidc2/genimage.cfg | 27 ---- board/hardkernel/odroidc2/post-image.sh | 19 --- board/hardkernel/odroidc2/readme.txt | 53 ------- 4 files changed, 275 deletions(-) delete mode 100644 board/hardkernel/odroidc2/boot.ini delete mode 100644 board/hardkernel/odroidc2/genimage.cfg delete mode 100755 board/hardkernel/odroidc2/post-image.sh delete mode 100644 board/hardkernel/odroidc2/readme.txt diff --git a/board/hardkernel/odroidc2/boot.ini b/board/hardkernel/odroidc2/boot.ini deleted file mode 100644 index 2fdffa3049..0000000000 --- a/board/hardkernel/odroidc2/boot.ini +++ /dev/null @@ -1,176 +0,0 @@ -ODROIDC2-UBOOT-CONFIG - -######################################################################## -# Changes made to this are overwritten every time there's a new upgrade -# To make your changes permanent change it on -# boot.ini.default -# After changing it on boot.ini.default run the bootini command to -# rewrite this file with your personal permanent settings. -# Documentation: http://odroid.com/dokuwiki/doku.php?id=en:c2_persistent_bootini -######################################################################## - -# Possible screen resolutions -# Uncomment only a single Line! The line with setenv written. -# At least one mode must be selected. - -# Custom modeline! -# To use custom modeline you need to disable all the below resolutions -# and setup your own! -# For more information check our wiki: -# http://odroid.com/dokuwiki/doku.php?id=en:c2_hdmi_autosetting -# Example below: -# setenv m "custombuilt" -# setenv modeline "1920,1200,154000,74040,60,1920,1968,2000,2080,1200,1202,1208,1235,1,0,1" - -# 480 Lines (720x480) -# setenv m "480i60hz" # Interlaced 60Hz -# setenv m "480i_rpt" # Interlaced for Rear Projection Televisions 60Hz -# setenv m "480p60hz" # 480 Progressive 60Hz -# setenv m "480p_rpt" # 480 Progressive for Rear Projection Televisions 60Hz - -# 576 Lines (720x576) -# setenv m "576i50hz" # Interlaced 50Hz -# setenv m "576i_rpt" # Interlaced for Rear Projection Televisions 50Hz -# setenv m "576p50hz" # Progressive 50Hz -# setenv m "576p_rpt" # Progressive for Rear Projection Televisions 50Hz - -# 720 Lines (1280x720) -# setenv m "720p50hz" # 50Hz -# setenv m "720p60hz" # 60Hz - -# 1080 Lines (1920x1080) -# setenv m "1080i60hz" # Interlaced 60Hz -setenv m "1080p60hz" # Progressive 60Hz -# setenv m "1080i50hz" # Interlaced 50Hz -# setenv m "1080p50hz" # Progressive 50Hz -# setenv m "1080p24hz" # Progressive 24Hz - -# 4K (3840x2160) -# setenv m "2160p30hz" # Progressive 30Hz -# setenv m "2160p25hz" # Progressive 25Hz -# setenv m "2160p24hz" # Progressive 24Hz -# setenv m "smpte24hz" # Progressive 24Hz SMPTE -# setenv m "2160p50hz" # Progressive 50Hz -# setenv m "2160p60hz" # Progressive 60Hz -# setenv m "2160p50hz420" # Progressive 50Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it) -# setenv m "2160p60hz420" # Progressive 60Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it) - -### VESA modes ### -# setenv m "640x480p60hz" -# setenv m "800x480p60hz" -# setenv m "480x800p60hz" -# setenv m "800x600p60hz" -# setenv m "1024x600p60hz" -# setenv m "1024x768p60hz" -# setenv m "1280x800p60hz" -# setenv m "1280x1024p60hz" -# setenv m "1360x768p60hz" -# setenv m "1440x900p60hz" -# setenv m "1600x900p60hz" -# setenv m "1680x1050p60hz" -# setenv m "1600x1200p60hz" -# setenv m "1920x1200p60hz" -# setenv m "2560x1080p60hz" -# setenv m "2560x1440p60hz" -# setenv m "2560x1600p60hz" -# setenv m "3440x1440p60hz" - -# HDMI BPP Mode -setenv m_bpp "32" -# setenv m_bpp "24" -# setenv m_bpp "16" - -# HDMI DVI/VGA modes -# By default its set to HDMI, if needed change below. -# Uncomment only a single Line. -# setenv vout "dvi" -# setenv vout "vga" - -# HDMI HotPlug Detection control -# Allows you to force HDMI thinking that the cable is connected. -# true = HDMI will believe that cable is always connected -# false = will let board/monitor negotiate the connection status -setenv hpd "true" -# setenv hpd "false" - -# Monitor output -# Controls if HDMI PHY should output anything to the monitor -setenv monitor_onoff "false" # true or false - -# Server Mode (aka. No Graphics) -# Setting nographics to 1 will disable all video subsystem -# This mode is ideal of server type usage. (Saves ~300Mb of RAM) -setenv nographics "0" - -# Meson Timer -# 1 - Meson Timer -# 0 - Arch Timer -# Using meson_timer improves the video playback however it breaks KVM (virtualization). -# Using arch timer allows KVM/Virtualization to work however you'll experience poor video -setenv mesontimer "1" - -# UHS (Ultra High Speed) MicroSD mode enable/disable -setenv disableuhs "false" - -# MicroSD Card Detection enable/disable -# Force the MMC controlled to believe that a card is connected. -setenv mmc_removable "true" - -# USB Multi WebCam tweak -# Only enable this if you use it. -setenv usbmulticam "false" - -# Default Console Device Setting -setenv condev "console=ttyS0,115200n8 console=tty0" # on both - -# CPU Frequency / Cores control -########################################### -### WARNING!!! WARNING!!! WARNING!!! -# Before changing anything here please read the wiki entry: -# http://odroid.com/dokuwiki/doku.php?id=en:c2_set_cpu_freq -# -# MAX CPU's -# setenv maxcpus "1" -# setenv maxcpus "2" -# setenv maxcpus "3" -setenv maxcpus "4" - -# MAX Frequency -# setenv max_freq "2016" # 2.016GHz -# setenv max_freq "1944" # 1.944GHz -# setenv max_freq "1944" # 1.944GHz -# setenv max_freq "1920" # 1.920GHz -# setenv max_freq "1896" # 1.896GHz -# setenv max_freq "1752" # 1.752GHz -# setenv max_freq "1680" # 1.680GHz -# setenv max_freq "1656" # 1.656GHz -setenv max_freq "1536" # 1.536GHz - - - -########################################### - -# Boot Arguments -if test "${m}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi - -setenv bootargs "root=/dev/mmcblk0p2 rootwait ro ${condev} no_console_suspend hdmimode=${m} ${cmode} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam}" - -# Booting - -setenv loadaddr "0x11000000" -setenv dtb_loadaddr "0x1000000" -setenv initrd_loadaddr "0x13000000" - -fatload mmc 0:1 ${loadaddr} Image -fatload mmc 0:1 ${dtb_loadaddr} meson64_odroidc2.dtb -fdt addr ${dtb_loadaddr} - -if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi -if test "${mesontimer}" = "1"; then fdt rm /timer; fi - -if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi -if test "${nographics}" = "1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /picdec; fdt rm /ppmgr; fi -if test "${nographics}" = "1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi -if test "${nographics}" = "1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi - -booti ${loadaddr} - ${dtb_loadaddr} diff --git a/board/hardkernel/odroidc2/genimage.cfg b/board/hardkernel/odroidc2/genimage.cfg deleted file mode 100644 index 15f97d4457..0000000000 --- a/board/hardkernel/odroidc2/genimage.cfg +++ /dev/null @@ -1,27 +0,0 @@ -image boot.vfat { - vfat { - files = { - "boot.ini", - "Image", - "meson64_odroidc2.dtb" - } - } - size = 32M -} - -image sdcard.img { - hdimage { - } - - partition vfat { - partition-type = 0xC - image = "boot.vfat" - offset = 1048576 - } - - partition rootfs { - partition-type = 0x83 - image = "rootfs.ext4" - size = 512M - } -} diff --git a/board/hardkernel/odroidc2/post-image.sh b/board/hardkernel/odroidc2/post-image.sh deleted file mode 100755 index aaf12c1e79..0000000000 --- a/board/hardkernel/odroidc2/post-image.sh +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh - -BOARD_DIR="$(dirname $0)" -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" - -cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/ - -rm -rf "${GENIMAGE_TMP}" - -genimage \ - --rootpath "${TARGET_DIR}" \ - --tmppath "${GENIMAGE_TMP}" \ - --inputpath "${BINARIES_DIR}" \ - --outputpath "${BINARIES_DIR}" \ - --config "${GENIMAGE_CFG}" - -dd if=${BINARIES_DIR}/u-boot.bin of=${BINARIES_DIR}/sdcard.img bs=1 count=442 conv=sync,notrunc -dd if=${BINARIES_DIR}/u-boot.bin of=${BINARIES_DIR}/sdcard.img bs=512 skip=1 seek=1 conv=fsync,notrunc diff --git a/board/hardkernel/odroidc2/readme.txt b/board/hardkernel/odroidc2/readme.txt deleted file mode 100644 index b44aa67f5a..0000000000 --- a/board/hardkernel/odroidc2/readme.txt +++ /dev/null @@ -1,53 +0,0 @@ -ODROID-C2 - -Intro -===== -To be able to use ODROID-C2 board with the images generated by -Buildroot, you have to prepare the SDCard or eMMC. - -How to build it -=============== - - $ make odroidc2_defconfig - -Then you can edit the build options using - - $ make menuconfig - -Compile all and build rootfs image: - - $ make - -Note: you will need to have access to the network, since Buildroot will -download the packages' sources. - -Result of the build -------------------- - -After building, you should obtain this tree: - - output/images/ - +-- Image - +-- boot.ini [1] - +-- boot.vfat - +-- meson64_odroidc2.dtb - +-- rootfs.ext2 - +-- rootfs.ext4 - +-- rootfs.tar - +-- sdcard.img - `-- u-boot.bin - -[1] This is the ODROID-C2 configuration file used in u-boot. - -How to write the SD card or eMMC -================================ - -Once the build process is finished you will have an image called "sdcard.img" -in the output/images/ directory. - -Copy the bootable "sdcard.img" onto an SD card or eMMC with "dd": - - $ sudo dd if=output/images/sdcard.img of=/dev/sdX - -Insert the SDcard into your ODROID-C2, and power it up. Your new system -should come up now. -- 2.30.2