From 1a627e7e6c61e97951932e3a9c5fb706efe3ef3e Mon Sep 17 00:00:00 2001 From: Tom Tromey Date: Fri, 14 Feb 2020 14:34:20 -0700 Subject: [PATCH] Change gdbserver to use existing gnulib and libiberty This changes gdbserver so that it no longer builds its own gnulib and libiberty. Instead, it now relies on the ones that were already built at the top level. gdbsupport is still built specially for gdbserver. This is more complicated and will be tackled in a subsequent patch. ChangeLog 2020-02-14 Tom Tromey * Makefile.in: Rebuild. * Makefile.def: Make gdbserver require gnulib and libiberty. gdbserver/ChangeLog 2020-02-14 Tom Tromey * acinclude.m4: Don't include acx_configure_dir.m4. * Makefile.in (LIBIBERTY_BUILDDIR, GNULIB_BUILDDIR): Update. (SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): Remove. (all, install-only, uninstall, clean-info, clean) (maintainer-clean): Don't recurse. (subdir_do, all-lib): Remove. ($(LIBGNU) $(LIBIBERTY) $(GNULIB_H)): Remove rule. (GNULIB_H): Remove. (generated_files): Update. ($(GNULIB_BUILDDIR)/Makefile): Remove rule. * configure: Rebuild. * configure.ac: Don't configure gnulib or libiberty. (GNULIB): Update. gdbsupport/ChangeLog 2020-02-14 Tom Tromey * common-defs.h: Change path to gnulib/config.h. Change-Id: I469cbbf5db2ab37109c058e9e3a1e4f4dabdfc98 --- ChangeLog | 5 + Makefile.def | 5 + Makefile.in | 4 + gdbserver/ChangeLog | 16 +++ gdbserver/Makefile.in | 59 +---------- gdbserver/acinclude.m4 | 2 - gdbserver/configure | 219 +-------------------------------------- gdbserver/configure.ac | 18 +--- gdbsupport/ChangeLog | 4 + gdbsupport/common-defs.h | 2 +- 10 files changed, 41 insertions(+), 293 deletions(-) diff --git a/ChangeLog b/ChangeLog index 4112251fcc8..7f6486f4118 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,8 @@ +2020-02-14 Tom Tromey + + * Makefile.in: Rebuild. + * Makefile.def: Make gdbserver require gnulib and libiberty. + 2020-02-07 Tom Tromey Pedro Alves diff --git a/Makefile.def b/Makefile.def index 72cb133a09a..2fe8204366c 100644 --- a/Makefile.def +++ b/Makefile.def @@ -410,6 +410,11 @@ dependencies = { module=all-gdb; on=all-libdecnumber; }; dependencies = { module=all-gdb; on=all-libtermcap; }; dependencies = { module=all-gdb; on=all-libctf; }; +// Host modules specific to gdbserver. +dependencies = { module=configure-gdbserver; on=all-gnulib; }; +dependencies = { module=all-gdbserver; on=all-gnulib; }; +dependencies = { module=all-gdbserver; on=all-libiberty; }; + dependencies = { module=configure-libgui; on=configure-tcl; }; dependencies = { module=configure-libgui; on=configure-tk; }; dependencies = { module=all-libgui; on=all-tcl; }; diff --git a/Makefile.in b/Makefile.in index 80fa458d8d0..be38b34e9bf 100644 --- a/Makefile.in +++ b/Makefile.in @@ -51976,6 +51976,8 @@ all-gdb: maybe-all-readline all-gdb: maybe-all-build-bison all-gdb: maybe-all-sim all-gdb: maybe-all-libtermcap +configure-gdbserver: maybe-all-gnulib +all-gdbserver: maybe-all-gnulib configure-libgui: maybe-configure-tcl configure-libgui: maybe-configure-tk all-libgui: maybe-all-tcl @@ -52427,6 +52429,7 @@ configure-gnattools: stage_last configure-libcc1: stage_last configure-utils: stage_last configure-gdb: stage_last +configure-gdbserver: stage_last configure-gdbsupport: stage_last configure-gprof: stage_last configure-sid: stage_last @@ -52450,6 +52453,7 @@ all-gdb: maybe-all-libiconv all-gdb: maybe-all-opcodes all-gdb: maybe-all-libdecnumber all-gdb: maybe-all-libctf +all-gdbserver: maybe-all-libiberty configure-gdbsupport: maybe-configure-bfd all-gdbsupport: maybe-all-bfd configure-gprof: maybe-configure-intl diff --git a/gdbserver/ChangeLog b/gdbserver/ChangeLog index e95177ee591..d27eeb557da 100644 --- a/gdbserver/ChangeLog +++ b/gdbserver/ChangeLog @@ -1,3 +1,19 @@ +2020-02-14 Tom Tromey + + * acinclude.m4: Don't include acx_configure_dir.m4. + * Makefile.in (LIBIBERTY_BUILDDIR, GNULIB_BUILDDIR): Update. + (SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): Remove. + (all, install-only, uninstall, clean-info, clean) + (maintainer-clean): Don't recurse. + (subdir_do, all-lib): Remove. + ($(LIBGNU) $(LIBIBERTY) $(GNULIB_H)): Remove rule. + (GNULIB_H): Remove. + (generated_files): Update. + ($(GNULIB_BUILDDIR)/Makefile): Remove rule. + * configure: Rebuild. + * configure.ac: Don't configure gnulib or libiberty. + (GNULIB): Update. + 2020-02-14 Eli Zaretskii * win32-low.c (create_process): Prepend PROGRAM to ARGS when diff --git a/gdbserver/Makefile.in b/gdbserver/Makefile.in index 5d0d608e058..d66bc81da1c 100644 --- a/gdbserver/Makefile.in +++ b/gdbserver/Makefile.in @@ -97,7 +97,7 @@ CC_LD = $(CXX) $(CXX_DIALECT) INCLUDE_DIR = ${srcdir}/../include INCLUDE_DEP = $$(INCLUDE_DIR) -LIBIBERTY_BUILDDIR = build-libiberty-gdbserver +LIBIBERTY_BUILDDIR = ../libiberty LIBIBERTY = $(LIBIBERTY_BUILDDIR)/libiberty.a # Where is ust? These will be empty if ust was not available. @@ -105,14 +105,10 @@ ustlibs = @ustlibs@ ustinc = @ustinc@ # gnulib -GNULIB_BUILDDIR = build-gnulib-gdbserver +GNULIB_BUILDDIR = ../gnulib LIBGNU = $(GNULIB_BUILDDIR)/import/libgnu.a INCGNU = -I$(srcdir)/../gnulib/import -I$(GNULIB_BUILDDIR)/import -# Generated headers in the gnulib directory. These must be listed -# so that they are generated before other files are compiled. -GNULIB_H = $(GNULIB_BUILDDIR)/import/string.h @GNULIB_STDINT_H@ - INCSUPPORT = -I$(srcdir)/.. -I.. # All the includes used for CFLAGS and for lint. @@ -329,15 +325,6 @@ XML_BUILTIN = @srv_xmlbuiltin@ IPA_DEPFILES = @IPA_DEPFILES@ extra_libraries = @extra_libraries@ -SUBDIRS = $(GNULIB_BUILDDIR) $(LIBIBERTY_BUILDDIR) -CLEANDIRS = $(SUBDIRS) - -# List of subdirectories in the build tree that must exist. -# This is used to force build failures in existing trees when -# a new directory is added. -# The format here is for the `case' shell command. -REQUIRED_SUBDIRS = $(GNULIB_BUILDDIR) | $(LIBIBERTY_BUILDDIR) - FLAGS_TO_PASS = \ "prefix=$(prefix)" \ "exec_prefix=$(exec_prefix)" \ @@ -371,10 +358,9 @@ FLAGS_TO_PASS = \ "RUNTESTFLAGS=$(RUNTESTFLAGS)" # All generated files which can be included by another file. -generated_files = config.h $(GNULIB_H) +generated_files = config.h all: gdbserver$(EXEEXT) gdbreplay$(EXEEXT) $(extra_libraries) - @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do # Traditionally "install" depends on "all". But it may be useful # not to; for example, if the user has made some trivial change to a @@ -393,10 +379,6 @@ install-only: fi; \ $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) gdbserver$(EXEEXT) $(DESTDIR)$(bindir)/$$n$(EXEEXT) - # Note that we run install and not install-only, as the latter - # is not part of GNU standards and in particular not provided - # in libiberty. - @$(MAKE) $(FLAGS_TO_PASS) DO=install "DODIRS=$(SUBDIRS)" subdir_do install-strip: $(MAKE) $(FLAGS_TO_PASS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ @@ -408,7 +390,6 @@ uninstall: force n=`echo gdbserver | sed '$(program_transform_name)'`; \ if [ x$$n = x ]; then n=gdbserver; else true; fi; \ rm -f $(DESTDIR)/$(bindir)/$$n$(EXEEXT) $(DESTDIR)$(man1dir)/$$n.1 - @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do installcheck: check: @@ -417,8 +398,7 @@ install-info: install-pdf: html: install-html: -clean-info: force - @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do +clean-info: gdbserver$(EXEEXT): $(sort $(OBS)) ${CDEPS} $(LIBGNU) $(LIBIBERTY) $(SILENCE) rm -f gdbserver$(EXEEXT) @@ -426,11 +406,6 @@ gdbserver$(EXEEXT): $(sort $(OBS)) ${CDEPS} $(LIBGNU) $(LIBIBERTY) -o gdbserver$(EXEEXT) $(OBS) $(LIBGNU) $(LIBIBERTY) \ $(GDBSERVER_LIBS) $(XM_CLIBS) -$(LIBGNU) $(LIBIBERTY) $(GNULIB_H): all-lib -all-lib: $(GNULIB_BUILDDIR)/Makefile $(LIBIBERTY_BUILDDIR)/Makefile - @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS="$(SUBDIRS)" subdir_do -.PHONY: all-lib - gdbreplay$(EXEEXT): $(sort $(GDBREPLAY_OBS)) $(LIBGNU) $(LIBIBERTY) $(SILENCE) rm -f gdbreplay$(EXEEXT) $(ECHO_CXXLD) $(CC_LD) $(INTERNAL_CFLAGS) $(INTERNAL_LDFLAGS) \ @@ -488,33 +463,14 @@ clean: rm -f $$i/*.o; \ rm -f $$i/$(DEPDIR)/*; \ done - @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do maintainer-clean realclean distclean: clean - @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do - rm -rf $(GNULIB_BUILDDIR) rm -f Makefile config.status config.h stamp-h config.log rm -f Makefile for i in $(CONFIG_SRC_SUBDIR); do \ rmdir $$i/$(DEPDIR); \ done -subdir_do: force - @for i in $(DODIRS); do \ - case $$i in \ - $(REQUIRED_SUBDIRS)) \ - if [ ! -f ./$$i/Makefile ] ; then \ - echo "Missing $$i/Makefile" >&2 ; \ - exit 1 ; \ - fi ;; \ - esac ; \ - if [ -f ./$$i/Makefile ] ; then \ - if (cd ./$$i; \ - $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \ - else exit 1 ; fi ; \ - else true ; fi ; \ - done - config.h: stamp-h ; @true stamp-h: config.in config.status $(SHELL) ./config.status config.h @@ -522,13 +478,6 @@ stamp-h: config.in config.status Makefile: Makefile.in config.status $(SHELL) ./config.status $@ -$(GNULIB_BUILDDIR)/Makefile: $(srcdir)/../gnulib/Makefile.in config.status - @cd $(GNULIB_BUILDDIR); CONFIG_FILES="Makefile" \ - CONFIG_COMMANDS="depfiles" \ - CONFIG_HEADERS= \ - CONFIG_LINKS= \ - $(SHELL) config.status - config.status: configure configure.srv $(srcdir)/../bfd/development.sh $(SHELL) ./config.status --recheck diff --git a/gdbserver/acinclude.m4 b/gdbserver/acinclude.m4 index 6ed43ddd521..00476bb0553 100644 --- a/gdbserver/acinclude.m4 +++ b/gdbserver/acinclude.m4 @@ -1,8 +1,6 @@ dnl gdb/gdbserver/configure.in uses BFD_HAVE_SYS_PROCFS_TYPE. m4_include(../bfd/bfd.m4) -m4_include(../gdb/acx_configure_dir.m4) - dnl This gets AM_GDB_WARNINGS. m4_include(../gdbsupport/warning.m4) diff --git a/gdbserver/configure b/gdbserver/configure index 7d42803f640..0ae464644c9 100755 --- a/gdbserver/configure +++ b/gdbserver/configure @@ -6243,223 +6243,6 @@ else CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type fi -gnulib_extra_configure_args= -# If large-file support is disabled, make sure gnulib does the same. -if test "$enable_largefile" = no; then -gnulib_extra_configure_args="$gnulib_extra_configure_args --disable-largefile" -fi - -# Configure gnulib. We can't use AC_CONFIG_SUBDIRS as that'd expect -# to find the the source subdir to be configured directly under -# gdbserver/. We need to build gnulib under some other directory not -# "gnulib", to avoid the problem of both GDB and GDBserver wanting to -# build it in the same directory, when building in the source dir. - - in_src="../gnulib" - in_build="build-gnulib-gdbserver" - in_extra_args="$gnulib_extra_configure_args" - - # Remove --cache-file, --srcdir, and --disable-option-checking arguments - # so they do not pile up. - ac_sub_configure_args= - ac_prev= - eval "set x $ac_configure_args" - shift - for ac_arg - do - if test -n "$ac_prev"; then - ac_prev= - continue - fi - case $ac_arg in - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \ - | --c=*) - ;; - --config-cache | -C) - ;; - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - ;; - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - ;; - --disable-option-checking) - ;; - *) - case $ac_arg in - *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append ac_sub_configure_args " '$ac_arg'" ;; - esac - done - - # Always prepend --prefix to ensure using the same prefix - # in subdir configurations. - ac_arg="--prefix=$prefix" - case $ac_arg in - *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args" - - # Pass --silent - if test "$silent" = yes; then - ac_sub_configure_args="--silent $ac_sub_configure_args" - fi - - # Always prepend --disable-option-checking to silence warnings, since - # different subdirs can have different --enable and --with options. - ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args" - - ac_popdir=`pwd` - ac_dir=$in_build - - ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)" - $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5 - $as_echo "$ac_msg" >&6 - as_dir="$ac_dir"; as_fn_mkdir_p - - case $srcdir in - [\\/]* | ?:[\\/]* ) - ac_srcdir=$srcdir/$in_src ;; - *) # Relative name. - ac_srcdir=../$srcdir/$in_src ;; - esac - - cd "$ac_dir" - - ac_sub_configure=$ac_srcdir/configure - - # Make the cache file name correct relative to the subdirectory. - case $cache_file in - [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;; - *) # Relative name. - ac_sub_cache_file=$ac_top_build_prefix$cache_file ;; - esac - - if test -n "$in_extra_args"; then - # Add the extra args at the end. - ac_sub_configure_args="$ac_sub_configure_args $in_extra_args" - fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5 -$as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;} - # The eval makes quoting arguments work. - eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \ - --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" || - as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5 - - cd "$ac_popdir" - - - - in_src="../libiberty" - in_build="build-libiberty-gdbserver" - in_extra_args= - - # Remove --cache-file, --srcdir, and --disable-option-checking arguments - # so they do not pile up. - ac_sub_configure_args= - ac_prev= - eval "set x $ac_configure_args" - shift - for ac_arg - do - if test -n "$ac_prev"; then - ac_prev= - continue - fi - case $ac_arg in - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \ - | --c=*) - ;; - --config-cache | -C) - ;; - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - ;; - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - ;; - --disable-option-checking) - ;; - *) - case $ac_arg in - *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append ac_sub_configure_args " '$ac_arg'" ;; - esac - done - - # Always prepend --prefix to ensure using the same prefix - # in subdir configurations. - ac_arg="--prefix=$prefix" - case $ac_arg in - *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args" - - # Pass --silent - if test "$silent" = yes; then - ac_sub_configure_args="--silent $ac_sub_configure_args" - fi - - # Always prepend --disable-option-checking to silence warnings, since - # different subdirs can have different --enable and --with options. - ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args" - - ac_popdir=`pwd` - ac_dir=$in_build - - ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)" - $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5 - $as_echo "$ac_msg" >&6 - as_dir="$ac_dir"; as_fn_mkdir_p - - case $srcdir in - [\\/]* | ?:[\\/]* ) - ac_srcdir=$srcdir/$in_src ;; - *) # Relative name. - ac_srcdir=../$srcdir/$in_src ;; - esac - - cd "$ac_dir" - - ac_sub_configure=$ac_srcdir/configure - - # Make the cache file name correct relative to the subdirectory. - case $cache_file in - [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;; - *) # Relative name. - ac_sub_cache_file=$ac_top_build_prefix$cache_file ;; - esac - - if test -n "$in_extra_args"; then - # Add the extra args at the end. - ac_sub_configure_args="$ac_sub_configure_args $in_extra_args" - fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5 -$as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;} - # The eval makes quoting arguments work. - eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \ - --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" || - as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5 - - cd "$ac_popdir" - - for ac_header in termios.h sys/reg.h string.h sys/procfs.h linux/elf.h fcntl.h signal.h sys/file.h sys/ioctl.h netinet/in.h sys/socket.h netdb.h netinet/tcp.h arpa/inet.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` @@ -10840,7 +10623,7 @@ fi -GNULIB=build-gnulib-gdbserver/import +GNULIB=../gnulib/import GNULIB_STDINT_H= if test x"$STDINT_H" != x; then diff --git a/gdbserver/configure.ac b/gdbserver/configure.ac index 0da2bfa95e4..be2284b26c5 100644 --- a/gdbserver/configure.ac +++ b/gdbserver/configure.ac @@ -69,22 +69,6 @@ AC_CONFIG_COMMANDS([gdbdepdir],[ ZW_PROG_COMPILER_DEPENDENCIES([CC]) -gnulib_extra_configure_args= -# If large-file support is disabled, make sure gnulib does the same. -if test "$enable_largefile" = no; then -gnulib_extra_configure_args="$gnulib_extra_configure_args --disable-largefile" -fi - -# Configure gnulib. We can't use AC_CONFIG_SUBDIRS as that'd expect -# to find the the source subdir to be configured directly under -# gdbserver/. We need to build gnulib under some other directory not -# "gnulib", to avoid the problem of both GDB and GDBserver wanting to -# build it in the same directory, when building in the source dir. -ACX_CONFIGURE_DIR(["../gnulib"], ["build-gnulib-gdbserver"], - ["$gnulib_extra_configure_args"]) - -ACX_CONFIGURE_DIR(["../libiberty"], ["build-libiberty-gdbserver"]) - AC_CHECK_HEADERS(termios.h sys/reg.h string.h dnl sys/procfs.h linux/elf.h dnl fcntl.h signal.h sys/file.h dnl @@ -432,7 +416,7 @@ AC_SUBST(srv_xmlfiles) AC_SUBST(IPA_DEPFILES) AC_SUBST(extra_libraries) -GNULIB=build-gnulib-gdbserver/import +GNULIB=../gnulib/import GNULIB_STDINT_H= if test x"$STDINT_H" != x; then diff --git a/gdbsupport/ChangeLog b/gdbsupport/ChangeLog index 0634e37d804..a55938ec46e 100644 --- a/gdbsupport/ChangeLog +++ b/gdbsupport/ChangeLog @@ -1,3 +1,7 @@ +2020-02-14 Tom Tromey + + * common-defs.h: Change path to gnulib/config.h. + 2020-02-13 Simon Marchi * Makefile.am: Rename source files from .c to .cc. diff --git a/gdbsupport/common-defs.h b/gdbsupport/common-defs.h index 027bf099c1a..a5c57de2f27 100644 --- a/gdbsupport/common-defs.h +++ b/gdbsupport/common-defs.h @@ -22,7 +22,7 @@ #ifdef GDBSERVER -#include +#include #undef PACKAGE_NAME #undef PACKAGE -- 2.30.2