From 1e9aa643872a108877bbe44438a1d1a6cac9d637 Mon Sep 17 00:00:00 2001 From: Florent Kermarrec Date: Mon, 9 Mar 2020 17:02:29 +0100 Subject: [PATCH] targets/icebreaker: simplify, use standard VexRiscv, add iCE40PLL and run BIOS from SPI Flash. --- litex/boards/targets/icebreaker.py | 205 ++++++++++------------------- 1 file changed, 72 insertions(+), 133 deletions(-) mode change 100644 => 100755 litex/boards/targets/icebreaker.py diff --git a/litex/boards/targets/icebreaker.py b/litex/boards/targets/icebreaker.py old mode 100644 new mode 100755 index c2325d2a..c8644d80 --- a/litex/boards/targets/icebreaker.py +++ b/litex/boards/targets/icebreaker.py @@ -3,184 +3,123 @@ # This file is Copyright (c) 2019 Sean Cross # This file is Copyright (c) 2018 David Shah # This file is Copyright (c) 2020 Piotr Esden-Tempski +# This file is Copyright (c) 2020 Florent Kermarrec # License: BSD -# This target was originally based on the Fomu target. - import argparse + from migen import * from migen.genlib.resetsync import AsyncResetSynchronizer -from litex.soc.cores import up5kspram, spi_flash -from litex.soc.integration.soc_core import SoCCore -from litex.soc.integration.builder import Builder, builder_argdict, builder_args -from litex.soc.integration.soc_core import soc_core_argdict, soc_core_args -from litex.soc.integration.doc import AutoDoc - -from litex_boards.platforms.icebreaker import Platform - -from litex.soc.interconnect import wishbone -from litex.soc.cores.uart import UARTWishboneBridge -from litex.soc.cores.gpio import GPIOOut +from litex.boards.platforms import icebreaker +from litex.soc.cores.up5kspram import Up5kSPRAM +from litex.soc.cores.spi_flash import SpiFlash +from litex.soc.cores.clock import iCE40PLL +from litex.soc.integration.soc_core import * +from litex.soc.integration.builder import * -class JumpToAddressROM(wishbone.SRAM): - def __init__(self, size, addr): - data = [ - 0x00000537 | ((addr & 0xfffff000) << 0), # lui a0,%hi(addr) - 0x00052503 | ((addr & 0x00000fff) << 20), # lw a0,%lo(addr)(a0) - 0x000500e7, # jalr a0 - ] - wishbone.SRAM.__init__(self, size, read_only=True, init=data) +kB = 1024 +mB = 1024*kB # CRG ---------------------------------------------------------------------------------------------- class _CRG(Module): - def __init__(self, platform): + def __init__(self, platform, sys_clk_freq): self.clock_domains.cd_sys = ClockDomain() self.clock_domains.cd_por = ClockDomain() - self.reset = Signal() - # # # - reset_delay = Signal(12, reset=4095) - - # Clocks + # Clocking clk12 = platform.request("clk12") - platform.add_period_constraint(clk12, 1e9/12e6) - self.comb += self.cd_sys.clk.eq(clk12) - self.comb += self.cd_por.clk.eq(clk12) - self.comb += self.cd_sys.rst.eq(reset_delay != 0) + rst_n = platform.request("user_btn_n") + if sys_clk_freq == 12e6: + self.comb += self.cd_sys.clk.eq(clk12) + else: + self.submodules.pll = pll = iCE40PLL(primitive="SB_PLL40_PAD") + pll.register_clkin(clk12, 12e6) + pll.create_clkout(self.cd_sys, sys_clk_freq) + platform.add_period_constraint(self.cd_sys.clk, 1e9/sys_clk_freq) # Power On Reset - self.sync.por += If(reset_delay != 0, reset_delay.eq(reset_delay - 1)) - self.specials += AsyncResetSynchronizer(self.cd_por, self.reset) + por_cycles = 4096 + por_counter = Signal(log2_int(por_cycles), reset=por_cycles-1) + self.comb += self.cd_por.clk.eq(self.cd_sys.clk) + platform.add_period_constraint(self.cd_por.clk, 1e9/sys_clk_freq) + self.sync.por += If(por_counter != 0, por_counter.eq(por_counter - 1)) + self.specials += AsyncResetSynchronizer(self.cd_por, ~rst_n) + self.specials += AsyncResetSynchronizer(self.cd_sys, (por_counter != 0)) # BaseSoC ------------------------------------------------------------------------------------------ class BaseSoC(SoCCore): - """A SoC on iCEBreaker, optionally with a softcore CPU""" - - # Statically-define the memory map, to prevent it from shifting across various litex versions. SoCCore.mem_map = { - "rom": 0x00000000, # (default shadow @0x80000000) - "sram": 0x10000000, # (default shadow @0xa0000000) - "spiflash": 0x20000000, # (default shadow @0xa0000000) - "csr": 0xe0000000, # (default shadow @0x60000000) - "vexriscv_debug": 0xf00f0000, + "sram": 0x10000000, + "spiflash": 0x20000000, + "csr": 0xf0000000, } + def __init__(self, bios_flash_offset, **kwargs): + sys_clk_freq = int(24e6) + platform = icebreaker.Platform() - def __init__(self, debug=True, boot_vector=0x2001a000, **kwargs): - """Create a basic SoC for iCEBreaker. + # Disable Integrated ROM/SRAM since too large for iCE40 and UP5K has specific SPRAM. + kwargs["integrated_sram_size"] = 0 + kwargs["integrated_rom_size"] = 0 - Create a basic SoC for iCEBreaker. The `sys` frequency will run at 12 MHz. + # Set CPU variant / reset address + kwargs["cpu_reset_address"] = self.mem_map["spiflash"] + bios_flash_offset - Returns: - Newly-constructed SoC - """ - platform = Platform() + # CRG -------------------------------------------------------------------------------------- + self.submodules.crg = _CRG(platform, sys_clk_freq) - kwargs["cpu_variant"] = "lite" - kwargs["cpu_reset_address"] = boot_vector - if debug: - kwargs["uart_name"] = "crossover" - kwargs["cpu_variant"] = "lite+debug" + # SoCCore ---------------------------------------------------------------------------------- + SoCCore.__init__(self, platform, sys_clk_freq, **kwargs) - clk_freq = int(12e6) + # 128KB SPRAM (used as SRAM) --------------------------------------------------------------- + self.submodules.spram = Up5kSPRAM(size=64*kB) + self.register_mem("sram", self.mem_map["sram"], self.spram.bus, 64*kB) - # Force the SRAM size to 0, because we add our own SRAM with SPRAM - kwargs["integrated_sram_size"] = 0 - kwargs["integrated_rom_size"] = 0 + # SPI Flash -------------------------------------------------------------------------------- + self.submodules.spiflash = SpiFlash(platform.request("spiflash4x"), dummy=6, endianness="little") + self.register_mem("spiflash", self.mem_map["spiflash"], self.spiflash.bus, size=16*mB) + self.add_csr("spiflash") + + # Add ROM linker region -------------------------------------------------------------------- + self.add_memory_region("rom", self.mem_map["spiflash"] + bios_flash_offset, 32*kB, type="cached+linker") - SoCCore.__init__(self, platform, clk_freq, **kwargs) - - # If there is a VexRiscv CPU, add a fake ROM that simply tells the CPU - # to jump to the given address. - if hasattr(self, "cpu") and self.cpu.name == "vexriscv": - self.add_memory_region("rom", 0, 16) - self.submodules.rom = JumpToAddressROM(16, boot_vector) - - self.submodules.crg = _CRG(platform) - - # UP5K has single port RAM, which is a dedicated 128 kilobyte block. - # Use this as CPU RAM. - spram_size = 128 * 1024 - self.submodules.spram = up5kspram.Up5kSPRAM(size=spram_size) - self.register_mem("sram", self.mem_map["sram"], self.spram.bus, spram_size) - - # The litex SPI module supports memory-mapped reads, as well as a bit-banged mode - # for doing writes. - spi_pads = platform.request("spiflash4x") - self.submodules.lxspi = spi_flash.SpiFlash(spi_pads, dummy=6, endianness="little") - self.register_mem("spiflash", self.mem_map["spiflash"], self.lxspi.bus, size=16 * 1024 * 1024) - self.add_csr("lxspi") - - # In debug mode, add a UART bridge. This takes over from the normal UART bridge, - # however you can use the "crossover" UART to communicate with this over the bridge. - if debug: - self.submodules.uart_bridge = UARTWishboneBridge(platform.request("serial"), clk_freq, baudrate=115200) - self.add_wb_master(self.uart_bridge.wishbone) - if hasattr(self, "cpu") and self.cpu.name == "vexriscv": - self.register_mem("vexriscv_debug", 0xf00f0000, self.cpu.debug_bus, 0x100) - - self.submodules.leds = GPIOOut(Cat( - platform.request("user_ledr_n"), - platform.request("user_ledg_n"))) - self.add_csr("leds") - - # self.add_memory_region("rom", 0x2001a000, 16 * 1024 * 1024 - 0x1a000, type="cached+linker") - # self.add_memory_region("boot", 0, 16, type="cached+linker") - # self.mem_regions["rom"] = SoCMemRegion(0x2001a000, 16 * 1024 * 1024 - 0x1a000, "cached") - # self.mem_regions["boot"] = SoCMemRegion(0, 16, "cached") - - def set_yosys_nextpnr_settings(self, nextpnr_seed=0, nextpnr_placer="heap"): - """Set Yosys/Nextpnr settings by overriding default LiteX's settings. - Args: - nextpnr_seed (int): Seed to use in Nextpnr - nextpnr_placer (str): Placer to use in Nextpnr - """ - assert hasattr(self.platform.toolchain, "yosys_template") - assert hasattr(self.platform.toolchain, "build_template") - self.platform.toolchain.yosys_template = [ - "{read_files}", - "attrmap -tocase keep -imap keep=\"true\" keep=1 -imap keep=\"false\" keep=0 -remove keep=0", - # Use "-relut -dffe_min_ce_use 4" to the synth_ice40 command. The "-reult" adds an additional - # LUT pass to pack more stuff in, and the "-dffe_min_ce_use 4" flag prevents Yosys from - # generating a Clock Enable signal for a LUT that has fewer than 4 flip-flops. This increases - # density, and lets us use the FPGA more efficiently. - "synth_ice40 -json {build_name}.json -top {build_name} -relut -abc2 -dffe_min_ce_use 4 -relut", - ] - self.platform.toolchain.build_template = [ - "yosys -q -l {build_name}.rpt {build_name}.ys", - "nextpnr-ice40 --json {build_name}.json --pcf {build_name}.pcf --asc {build_name}.txt" - + " --pre-pack {build_name}_pre_pack.py --{architecture} --package {package}" - + " --seed {}".format(nextpnr_seed) - + " --placer {}".format(nextpnr_placer), - # Disable final deep-sleep power down so firmware words are loaded onto softcore's address bus. - "icepack -s {build_name}.txt {build_name}.bin" - ] + # Leds ------------------------------------------------------------------------------------- + counter = Signal(32) + self.sync += counter.eq(counter + 1) + self.comb += platform.request("user_ledr_n").eq(counter[26]) + self.comb += platform.request("user_ledg_n").eq(~counter[26]) + +# Flash -------------------------------------------------------------------------------------------- + +def flash(bios_flash_offset): + from litex.build.lattice.programmer import IceStormProgrammer + prog = IceStormProgrammer() + prog.flash(bios_flash_offset, "soc_basesoc_icebreaker/software/bios/bios.bin") + prog.flash(0x00000000, "soc_basesoc_icebreaker/gateware/top.bin") + exit() # Build -------------------------------------------------------------------------------------------- def main(): parser = argparse.ArgumentParser(description="LiteX SoC on iCEBreaker") - parser.add_argument("--nextpnr-seed", default=0, help="Seed to use in Nextpnr") - parser.add_argument("--nextpnr-placer", default="heap", choices=["sa", "heap"], help="Placer implementation to use in Nextpnr") + parser.add_argument("--bios-flash-offset", default=0x40000, help="BIOS offset in SPI Flash") + parser.add_argument("--flash", action="store_true", help="Load Bitstream") builder_args(parser) soc_core_args(parser) args = parser.parse_args() - soc = BaseSoC(debug=True, **soc_core_argdict(args)) - soc.set_yosys_nextpnr_settings(nextpnr_seed=args.nextpnr_seed, nextpnr_placer=args.nextpnr_placer) + if args.flash: + flash(args.bios_flash_offset) - # Don't build software -- we don't include it since we just jump to SPI flash. - builder_kwargs = builder_argdict(args) - builder_kwargs["compile_software"] = False - builder = Builder(soc, **builder_kwargs) + soc = BaseSoC(args.bios_flash_offset, **soc_core_argdict(args)) + builder = Builder(soc, **builder_argdict(args)) builder.build() - if __name__ == "__main__": main() -- 2.30.2