From 1f0130feda318b5a1caa1c41cf849781fc4a8c30 Mon Sep 17 00:00:00 2001 From: Suniel Mahesh Date: Sun, 5 Jul 2020 01:46:44 +0530 Subject: [PATCH] configs/rock_pi_n10: new defconfig Add initial support for RK3399PRO SOM based rockpi-n10 target with below features: - Custom U-Boot 2020.07-rc4 https://github.com/amarula/u-boot-amarula.git branch rock-pi - Linux 5.7.2 - GPT partition layout is being used - Default packages from buildroot Signed-off-by: Suniel Mahesh Signed-off-by: Thomas Petazzoni --- .gitlab-ci.yml | 1 + DEVELOPERS | 2 + board/radxa/rockpi-n10/extlinux.conf | 4 ++ board/radxa/rockpi-n10/genimage.cfg | 39 ++++++++++++++++++ board/radxa/rockpi-n10/post-build.sh | 5 +++ board/radxa/rockpi-n10/readme.txt | 61 ++++++++++++++++++++++++++++ configs/rock_pi_n10_defconfig | 56 +++++++++++++++++++++++++ 7 files changed, 168 insertions(+) create mode 100644 board/radxa/rockpi-n10/extlinux.conf create mode 100644 board/radxa/rockpi-n10/genimage.cfg create mode 100755 board/radxa/rockpi-n10/post-build.sh create mode 100644 board/radxa/rockpi-n10/readme.txt create mode 100644 configs/rock_pi_n10_defconfig diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index ac4c826fb7..c194eb6186 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -319,6 +319,7 @@ raspberrypi_defconfig: { extends: .defconfig } riotboard_defconfig: { extends: .defconfig } roc_pc_rk3399_defconfig: { extends: .defconfig } rock64_defconfig: { extends: .defconfig } +rock_pi_n10_defconfig: { extends: .defconfig } roseapplepi_defconfig: { extends: .defconfig } s6lx9_microboard_defconfig: { extends: .defconfig } sheevaplug_defconfig: { extends: .defconfig } diff --git a/DEVELOPERS b/DEVELOPERS index 98d1fde63f..b2b3a2a211 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2412,7 +2412,9 @@ F: package/powertop/ N: Suniel Mahesh F: board/firefly/ +F: board/radxa/rockpi-n10 F: configs/roc_pc_rk3399_defconfig +F: configs/rock_pi_n10_defconfig F: package/arm-gnu-a-toolchain/ N: Sven Haardiek diff --git a/board/radxa/rockpi-n10/extlinux.conf b/board/radxa/rockpi-n10/extlinux.conf new file mode 100644 index 0000000000..b6a4c97cd9 --- /dev/null +++ b/board/radxa/rockpi-n10/extlinux.conf @@ -0,0 +1,4 @@ +label RK3399_ROCK_PI_N10 linux + kernel /Image + devicetree /rk3399pro-rock-pi-n10.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p4 rw rootwait diff --git a/board/radxa/rockpi-n10/genimage.cfg b/board/radxa/rockpi-n10/genimage.cfg new file mode 100644 index 0000000000..8fbf562f28 --- /dev/null +++ b/board/radxa/rockpi-n10/genimage.cfg @@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "Image", + "rk3399pro-rock-pi-n10.dtb", + "extlinux" + } + } + size = 112M +} + +image sdcard.img { + + hdimage { + gpt = true + } + + partition loader1 { + image = "idbloader.img" + offset = 32K + } + + partition loader2 { + image = "u-boot.itb" + offset = 8M + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 16M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/radxa/rockpi-n10/post-build.sh b/board/radxa/rockpi-n10/post-build.sh new file mode 100755 index 0000000000..ba29375c05 --- /dev/null +++ b/board/radxa/rockpi-n10/post-build.sh @@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf diff --git a/board/radxa/rockpi-n10/readme.txt b/board/radxa/rockpi-n10/readme.txt new file mode 100644 index 0000000000..49decbb3d9 --- /dev/null +++ b/board/radxa/rockpi-n10/readme.txt @@ -0,0 +1,61 @@ +RADXA ROCKPI-N10 +================ +https://wiki.radxa.com/RockpiN10 + +Build: +====== + $ make rock_pi_n10_defconfig + $ make + +Files created in output directory +================================= + +output/images +. +├── bl31.elf +├── boot.vfat +├── extlinux +├── idbloader.img +├── Image +├── rk3399pro-rock-pi-n10.dtb +├── rootfs.ext2 +├── rootfs.ext4 -> rootfs.ext2 +├── rootfs.tar +├── sdcard.img +├── u-boot.bin +└── u-boot.itb + +Creating bootable SD card: +========================== + +Simply invoke (as root) + +sudo dd if=output/images/sdcard.img of=/dev/sdX && sync + +Where X is your SD card device. + +Booting: +======== + +Serial console: +--------------- +RockPi-N10 has a 40-pin GPIO header. The pin layout is as follows: + +pin 6: gnd +pin 8: tx +pin 10: rx + +Baudrate for this board is 1500000. + +The boot order on rockpi-n10 is emmc, sd. If emmc contains a valid Image, the board +always boots from emmc. To boot from SD, erase emmc as per the guide: + +https://wiki.amarulasolutions.com/bsp/setup/rockchip/rk3399_emmc.html + +Login: +------ +Enter 'root' as login user, and the prompt is ready. + +wiki link: +---------- +https://wiki.amarulasolutions.com/bsp/rockchip/rk3399pro/rock-pi-n10.html diff --git a/configs/rock_pi_n10_defconfig b/configs/rock_pi_n10_defconfig new file mode 100644 index 0000000000..bfaa489a20 --- /dev/null +++ b/configs/rock_pi_n10_defconfig @@ -0,0 +1,56 @@ +# Architecture +BR2_aarch64=y +BR2_cortex_a72_a53=y + +# Linux headers same as kernel, a 5.7 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_7=y + +# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="" + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="cf2747360fdd1eb0d51dd01a984c7c62c7f714fe" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock-pi-n10-rk3399pro" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYTHON=y +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.7.2" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399pro-rock-pi-n10" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="rockpi-n10" +BR2_TARGET_GENERIC_ISSUE="Welcome to ROCKPI-N10" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="160M" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/radxa/rockpi-n10/genimage.cfg" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/radxa/rockpi-n10/post-build.sh" -- 2.30.2