From 2fd33e94480fc2c662d1ad28f83e522cc5dbdc2e Mon Sep 17 00:00:00 2001 From: Don Breazeal Date: Fri, 11 Sep 2015 11:06:02 -0700 Subject: [PATCH] Extended-remote exec test This patch updates several exec-related tests and some of the library functions in order to get them running with extended-remote. There were three changes that were required, as follows: In gdb.base/foll-exec.exp, use 'clean_start' in place of proc 'zap_session' to reset the state of the debugger between tests. This sets 'remote exec-file' to execute the correct binary file in each subsequent test. In gdb.base/pie-execl.exp, there is an expect statement with an expression that is used to match output from both gdb and the program under debug. For the remote target, this had to be split into two expressions, using $inferior_spawn_id to match the output from the program. Because I had encountered problems with extended-remote exec events in non-stop mode in my manual testing, I added non-stop testing to the non-ldr-exc-[1234].exp tests. In order to set non-stop mode for remote targets, it is necessary to 'set non-stop on' after gdb has started, but before it connects to gdbserver. This is done using 'save_vars' to set non-stop mode in GDBFLAGS, so GDB sets non-stop mode on startup. gdb/testsuite/ChangeLog: * gdb.base/foll-exec.c: Add copyright header. Fix formatting issues. * gdb.base/foll-exec.exp (zap_session): Delete proc. (do_exec_tests): Use clean_restart in place of zap_session, and for test initialization. Fix formatting issues. Use fail in place of perror. * gdb.base/pie-execl.exp (main): Use 'inferior_spawn_id' in an expect statement to match an expression with output from the program under debug. * gdb.threads/non-ldr-exc-1.exp (do_test, main): Add non-stop tests and pass stop mode argument to clean_restart. Use save_vars to enable non-stop in GDBFLAGS. * gdb.threads/non-ldr-exc-2.exp: Likewise. * gdb.threads/non-ldr-exc-3.exp: Likewise. * gdb.threads/non-ldr-exc-4.exp: Likewise. --- gdb/testsuite/ChangeLog | 17 ++++++ gdb/testsuite/gdb.base/foll-exec.c | 44 +++++++++----- gdb/testsuite/gdb.base/foll-exec.exp | 65 +++++---------------- gdb/testsuite/gdb.base/foll-vfork.exp | 29 ++++----- gdb/testsuite/gdb.base/pie-execl.exp | 24 +++++++- gdb/testsuite/gdb.threads/non-ldr-exc-1.exp | 24 ++++++-- gdb/testsuite/gdb.threads/non-ldr-exc-2.exp | 24 ++++++-- gdb/testsuite/gdb.threads/non-ldr-exc-3.exp | 30 ++++++++-- gdb/testsuite/gdb.threads/non-ldr-exc-4.exp | 24 ++++++-- 9 files changed, 178 insertions(+), 103 deletions(-) diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 1538d152f1e..7753bdb47ef 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,20 @@ +2015-09-11 Don Breazeal + + * gdb.base/foll-exec.c: Add copyright header. Fix + formatting issues. + * gdb.base/foll-exec.exp (zap_session): Delete proc. + (do_exec_tests): Use clean_restart in place of zap_session, + and for test initialization. Fix formatting issues. Use + fail in place of perror. + * gdb.base/pie-execl.exp (main): Use 'inferior_spawn_id' in + an expect statement to match an expression with output from + the program under debug. + * gdb.threads/non-ldr-exc-1.exp (do_test, main): Add + non-stop tests and use save_vars to enable non-stop in GDBFLAGS. + * gdb.threads/non-ldr-exc-2.exp: Likewise. + * gdb.threads/non-ldr-exc-3.exp: Likewise. + * gdb.threads/non-ldr-exc-4.exp: Likewise. + 2015-09-09 Doug Evans * gdb.python/py-prettyprint.exp: Check result of run_lang_tests. diff --git a/gdb/testsuite/gdb.base/foll-exec.c b/gdb/testsuite/gdb.base/foll-exec.c index 6e302bb8ce3..77287a45c20 100644 --- a/gdb/testsuite/gdb.base/foll-exec.c +++ b/gdb/testsuite/gdb.base/foll-exec.c @@ -1,36 +1,52 @@ +/* This test program is part of GDB, the GNU debugger. + + Copyright 1997-2015 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + #include #include #include #include - -int global_i = 100; +int global_i = 100; int main (void) { - int local_j = global_i+1; - int local_k = local_j+1; + int local_j = global_i + 1; + int local_k = local_j + 1; printf ("foll-exec is about to execlp(execd-prog)...\n"); execlp (BASEDIR "/execd-prog", - BASEDIR "/execd-prog", - "execlp arg1 from foll-exec", - (char *)0); + BASEDIR "/execd-prog", + "execlp arg1 from foll-exec", + (char *) 0); printf ("foll-exec is about to execl(execd-prog)...\n"); execl (BASEDIR "/execd-prog", /* tbreak-execl */ - BASEDIR "/execd-prog", - "execl arg1 from foll-exec", - "execl arg2 from foll-exec", - (char *)0); + BASEDIR "/execd-prog", + "execl arg1 from foll-exec", + "execl arg2 from foll-exec", + (char *) 0); { static char * argv[] = { - (char *)BASEDIR "/execd-prog", - (char *)"execv arg1 from foll-exec", - (char *)0}; + (char *) BASEDIR "/execd-prog", + (char *) "execv arg1 from foll-exec", + (char *) 0}; printf ("foll-exec is about to execv(execd-prog)...\n"); diff --git a/gdb/testsuite/gdb.base/foll-exec.exp b/gdb/testsuite/gdb.base/foll-exec.exp index 5bea3badc04..0a6347c82fd 100644 --- a/gdb/testsuite/gdb.base/foll-exec.exp +++ b/gdb/testsuite/gdb.base/foll-exec.exp @@ -13,6 +13,9 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see . +# This is a test of gdb's ability to follow a process through a +# Unix exec() system call. + if { [is_remote target] || ![isnative] } then { continue } @@ -44,44 +47,14 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable $com return -1 } -proc zap_session {} { - global gdb_prompt - global binfile - - send_gdb "kill\n" - gdb_expect { - -re ".*Kill the program being debugged.*y or n. $" { - gdb_test_no_output "y" "" - send_gdb "file $binfile\n" - gdb_expect { - -re ".*Load new symbol table from.*y or n. $" { - send_gdb "y\n" - gdb_expect { - -re "Reading symbols from.*$gdb_prompt $" {} - timeout { fail "loading symbols (timeout)"; return } - } - } - -re ".*gdb_prompt $" {} - timeout { fail "loading symbols (timeout)"; return } - } - } - -re ".*$gdb_prompt $" {} - timeout { fail "killing inferior (timeout)" ; return } - } -} - proc do_exec_tests {} { + global binfile srcfile srcfile2 testfile testfile2 global gdb_prompt - global binfile - global srcfile - global srcfile2 - global testfile - global testfile2 # Start the program running, and stop at main. # if ![runto_main] then { - perror "Couldn't run ${testfile}" + fail "Couldn't run ${testfile}" return } @@ -103,12 +76,12 @@ proc do_exec_tests {} { return } - zap_session + clean_restart $binfile # Start the program running, and stop at main. # if ![runto_main] then { - perror "Couldn't run ${testfile}" + fail "Couldn't run ${testfile}" return } @@ -192,12 +165,12 @@ proc do_exec_tests {} { # Explicitly kill this program, or a subsequent rerun actually runs # the exec'd program, not the original program... - zap_session + clean_restart $binfile # Start the program running, and stop at main. # if ![runto_main] then { - perror "Couldn't run ${testfile} (2nd try)" + fail "Couldn't run ${testfile} (2nd try)" return } @@ -265,12 +238,12 @@ proc do_exec_tests {} { # Explicitly kill this program, or a subsequent rerun actually runs # the exec'd program, not the original program... - zap_session + clean_restart $binfile # Start the program running, and stop at main. # if ![runto_main] then { - perror "Couldn't run ${testfile} (3rd try)" + fail "Couldn't run ${testfile} (3rd try)" return } @@ -326,12 +299,12 @@ proc do_exec_tests {} { # Explicitly kill this program, or a subsequent rerun actually runs # the exec'd program, not the original program... - zap_session + clean_restart $binfile # Start the program running, and stop at main. # if ![runto_main] then { - perror "Couldn't run ${testfile} (4th try)" + fail "Couldn't run ${testfile} (4th try)" return } @@ -381,12 +354,12 @@ proc do_exec_tests {} { # Explicitly kill this program, or a subsequent rerun actually runs # the exec'd program, not the original program... - zap_session + clean_restart $binfile # Start the program running, and stop at main. # if ![runto_main] then { - perror "Couldn't run ${testfile} (5th try)" + fail "Couldn't run ${testfile} (5th try)" return } @@ -406,14 +379,8 @@ proc do_exec_tests {} { # Start with a fresh gdb gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - +clean_restart $binfile -# This is a test of gdb's ability to follow a process through a -# Unix exec() system call. -# do_exec_tests return 0 diff --git a/gdb/testsuite/gdb.base/foll-vfork.exp b/gdb/testsuite/gdb.base/foll-vfork.exp index b94b7ea7bc1..78c5cc82245 100644 --- a/gdb/testsuite/gdb.base/foll-vfork.exp +++ b/gdb/testsuite/gdb.base/foll-vfork.exp @@ -524,23 +524,18 @@ with_test_prefix "check vfork support" { check_vfork_catchpoints } -# There is no support for exec events in the RSP yet. -if { ![gdb_is_target_remote] } { - # Follow parent and follow child vfork tests with a child that execs. - with_test_prefix "exec" { - # These are tests of gdb's ability to follow the parent of a Unix - # vfork system call. The child will subsequently call a variant - # of the Unix exec system call. - do_vfork_and_follow_parent_tests - - # These are tests of gdb's ability to follow the child of a Unix - # vfork system call. The child will subsequently call a variant - # of a Unix exec system call. - # - do_vfork_and_follow_child_tests_exec - } -} else { - unsupported "vfork with exec: exec events not supported for remote" +# Follow parent and follow child vfork tests with a child that execs. +with_test_prefix "exec" { + # These are tests of gdb's ability to follow the parent of a Unix + # vfork system call. The child will subsequently call a variant + # of the Unix exec system call. + do_vfork_and_follow_parent_tests + + # These are tests of gdb's ability to follow the child of a Unix + # vfork system call. The child will subsequently call a variant + # of a Unix exec system call. + # + do_vfork_and_follow_child_tests_exec } # Switch to test the case of the child exiting. We can't use diff --git a/gdb/testsuite/gdb.base/pie-execl.exp b/gdb/testsuite/gdb.base/pie-execl.exp index 182f96f7eda..51edc821df2 100644 --- a/gdb/testsuite/gdb.base/pie-execl.exp +++ b/gdb/testsuite/gdb.base/pie-execl.exp @@ -16,6 +16,9 @@ # The problem was due to amd64_skip_prologue attempting to access inferior # memory before the PIE (Position Independent Executable) gets relocated. +global inferior_spawn_id +global gdb_spawn_id + if ![istarget *-linux*] { continue } @@ -67,6 +70,7 @@ gdb_test_multiple "p/x &pie_execl_marker" $test { verbose -log "addr1 is $addr1" set test "continue" +set matches_found 0 gdb_test_multiple $test $test { -re "Error in re-setting breakpoint" { fail $test @@ -74,8 +78,24 @@ gdb_test_multiple $test $test { -re "Cannot access memory" { fail $test } - -re "pie-execl: re-exec.*executing new program.*\r\nBreakpoint \[0-9\]+,\[^\r\n\]* pie_execl_marker .*\r\n$gdb_prompt $" { - pass $test + -i "$inferior_spawn_id" -re "pie-execl: re-exec" { + # output from inferior + incr matches_found + if { $matches_found == 2 } { + pass $test + } else { + exp_continue + } + } + -i "$gdb_spawn_id" + -re "executing new program.*\r\nBreakpoint \[0-9\]+,\[^\r\n\]* pie_execl_marker .*\r\n$gdb_prompt $" { + # output from gdb + incr matches_found + if { $matches_found == 2 } { + pass $test + } else { + exp_continue + } } } diff --git a/gdb/testsuite/gdb.threads/non-ldr-exc-1.exp b/gdb/testsuite/gdb.threads/non-ldr-exc-1.exp index 69e5cc6b129..d3a9601540e 100644 --- a/gdb/testsuite/gdb.threads/non-ldr-exc-1.exp +++ b/gdb/testsuite/gdb.threads/non-ldr-exc-1.exp @@ -28,11 +28,14 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab return -1 } -proc do_test { lock_sched } { - with_test_prefix "lock-sched$lock_sched" { +proc do_test { lock_sched nonstop } { + with_test_prefix "lock-sched=$lock_sched,non-stop=$nonstop" { global executable - clean_restart ${executable} + save_vars { GDBFLAGS } { + append GDBFLAGS " -ex \"set non-stop $nonstop\"" + clean_restart ${executable} + } if ![runto_main] { return -1 @@ -48,11 +51,22 @@ proc do_test { lock_sched } { gdb_test_no_output "set scheduler-locking on" } + if { $nonstop == "on" } { + gdb_test "thread 2" "Switching.*" + } + gdb_test "continue" \ ".*is executing new program.*Breakpoint 1, main.* at .*" \ "continue over exec" } } -do_test 0 -do_test 1 +foreach nonstop {"on" "off"} { + foreach schedlock {"on" "off"} { + if {$schedlock == "on" && $nonstop == "on"} { + # Schedule locking has no effect in nonstop mode. + continue + } + do_test $schedlock $nonstop + } +} diff --git a/gdb/testsuite/gdb.threads/non-ldr-exc-2.exp b/gdb/testsuite/gdb.threads/non-ldr-exc-2.exp index 9386153b8e3..8b170ec48eb 100644 --- a/gdb/testsuite/gdb.threads/non-ldr-exc-2.exp +++ b/gdb/testsuite/gdb.threads/non-ldr-exc-2.exp @@ -29,11 +29,14 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab return -1 } -proc do_test { lock_sched } { - with_test_prefix "lock-sched$lock_sched" { +proc do_test { lock_sched nonstop } { + with_test_prefix "lock-sched=$lock_sched,non-stop=$nonstop" { global executable - clean_restart ${executable} + save_vars { GDBFLAGS } { + append GDBFLAGS " -ex \"set non-stop $nonstop\"" + clean_restart ${executable} + } if ![runto_main] { return -1 @@ -42,6 +45,10 @@ proc do_test { lock_sched } { gdb_breakpoint [gdb_get_line_number "break-here"] gdb_continue_to_breakpoint "break-here" ".* break-here .*" + if { $nonstop == "on" } { + gdb_test "thread 2" "Switching.*" + } + gdb_test "info threads" \ "\r\n\[ \t\]*Id\[ \t\]+Target\[ \t\]+Id\[ \t\]+Frame\[ \t\]*\r\n\\* 2 *Thread \[^\r\n\]* at \[^\r\n\]*" \ "single thread left" @@ -59,5 +66,12 @@ proc do_test { lock_sched } { } } -do_test 0 -do_test 1 +foreach nonstop {"on" "off"} { + foreach schedlock {"on" "off"} { + if {$schedlock == "on" && $nonstop == "on"} { + # Schedule locking has no effect in nonstop mode. + continue + } + do_test $schedlock $nonstop + } +} diff --git a/gdb/testsuite/gdb.threads/non-ldr-exc-3.exp b/gdb/testsuite/gdb.threads/non-ldr-exc-3.exp index cc7da1a750e..3e7a3a1295b 100644 --- a/gdb/testsuite/gdb.threads/non-ldr-exc-3.exp +++ b/gdb/testsuite/gdb.threads/non-ldr-exc-3.exp @@ -31,18 +31,25 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab return -1 } -proc do_test { lock_sched } { - with_test_prefix "lock-sched$lock_sched" { +proc do_test { lock_sched nonstop } { + with_test_prefix "lock-sched=$lock_sched,non-stop=$nonstop" { global executable - clean_restart ${executable} + save_vars { GDBFLAGS } { + append GDBFLAGS " -ex \"set non-stop $nonstop\"" + clean_restart ${executable} + } if ![runto_main] { return -1 } gdb_breakpoint [gdb_get_line_number "break-here"] - gdb_continue_to_breakpoint "break-here" ".* break-here .*" + gdb_test_multiple "continue" "continue to breakpoint" { + -re ".*Breakpoint.*break-here.*" { + pass "continue to breakpoint" + } + } # Also test with sched-lock to make sure we can follow the # non-leader thread execing even though the main thread wasn't @@ -51,11 +58,22 @@ proc do_test { lock_sched } { gdb_test_no_output "set scheduler-locking on" } + if { $nonstop == "on" } { + gdb_test "thread 2" "Switching.*" + } + gdb_test "continue" \ ".*is executing new program.*Breakpoint 1, main.* at .*" \ "continue over exec" } } -do_test 0 -do_test 1 +foreach nonstop {"on" "off"} { + foreach schedlock {"on" "off"} { + if {$schedlock == "on" && $nonstop == "on"} { + # Schedule locking has no effect in nonstop mode. + continue + } + do_test $schedlock $nonstop + } +} diff --git a/gdb/testsuite/gdb.threads/non-ldr-exc-4.exp b/gdb/testsuite/gdb.threads/non-ldr-exc-4.exp index a89b818b6d0..4d7e97ad5a1 100644 --- a/gdb/testsuite/gdb.threads/non-ldr-exc-4.exp +++ b/gdb/testsuite/gdb.threads/non-ldr-exc-4.exp @@ -30,11 +30,14 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab return -1 } -proc do_test { lock_sched } { - with_test_prefix "lock-sched$lock_sched" { +proc do_test { lock_sched nonstop } { + with_test_prefix "lock-sched=$lock_sched,non-stop=$nonstop" { global executable - clean_restart ${executable} + save_vars { GDBFLAGS } { + append GDBFLAGS " -ex \"set non-stop $nonstop\"" + clean_restart ${executable} + } if ![runto_main] { return -1 @@ -50,11 +53,22 @@ proc do_test { lock_sched } { gdb_test_no_output "set scheduler-locking on" } + if { $nonstop == "on" } { + gdb_test "thread 2" "Switching.*" + } + gdb_test "continue" \ ".*is executing new program.*Breakpoint 1, main.* at .*" \ "continue over exec" } } -do_test 0 -do_test 1 +foreach nonstop {"on" "off"} { + foreach schedlock {"on" "off"} { + if {$schedlock == "on" && $nonstop == "on"} { + # Schedule locking has no effect in nonstop mode. + continue + } + do_test $schedlock $nonstop + } +} -- 2.30.2