From 2ffdcbe0a5304a865e4486e7de0a7e6d983e2ce2 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Tue, 20 Nov 2018 15:30:10 +0200 Subject: [PATCH] board: macchiatobin: update readme.txt Update the kernel and U-Boot versions to the actual versions in use. Update the description of supported hardware features. Add a note that the stale SPI flash environment issue only affects the vendor BSP. Cc: Sergey Matyukevich Signed-off-by: Baruch Siach Signed-off-by: Peter Korsgaard --- board/solidrun/macchiatobin/readme.txt | 30 +++++++++++++++----------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/board/solidrun/macchiatobin/readme.txt b/board/solidrun/macchiatobin/readme.txt index dfbd6e793b..dc5d6c794d 100644 --- a/board/solidrun/macchiatobin/readme.txt +++ b/board/solidrun/macchiatobin/readme.txt @@ -15,19 +15,20 @@ How to build There are two build options: mainline support and vendor support. For the mainline BSP, we use: - - Linux v4.15 - - U-Boot v2018.01 + - Linux v4.19.2 + - U-Boot v2018.11 For the vendor BSP, we use the sources available from Marvell Github page at https://github.com/MarvellEmbeddedProcessors, which uses: - - Linux v4.4.52 - - U-Boot v2017.03 + - Linux v4.4.120 + - U-Boot v2018.03 -At the moment mainline support for the board is a work in progress. -Mainline kernel 4.15 enables eth2 in 1Gb (RJ45 connector J5) and -eth0 in 10Gb (SFP connector CON15 and RJ45 connector CON16). -The vendor BSP enables more hardware features out of the box, -e.g. all the network interfaces. +At the moment mainline support for the board is a work in +progress. Mainline kernel 4.19 enables eth2 in 1Gb (RJ45 connector J5), +copper 10Gb interfaces, and automatic configuration of select SFP +modules on the SFP cages. The vendor BSP enables more hardware features +out of the box, but lacks support for SFP detection and automatic +configuration. To use the mainline BSP run the following commands: @@ -73,10 +74,13 @@ Insert the micro SDcard in the MacchiatoBin board and power it up. The serial console is accessible at the micro-USB Type-B connector marked CON9. The serial line settings are 115200 8N1. -By default U-Boot will load its environment from the SPI flash. On the -first boot SPI flash may be empty or it may contain a legacy -environment incompatible with up-to-date mainline U-Boot and -kernel. Then the following commands can be used to boot the board: +Note: the following text only applies to the vendor BSP from +solidrun_macchiatobin_marvell_defconfig. + +By default Marvell provided U-Boot will load its environment from the +SPI flash. On the first boot SPI flash may be empty or it may contain a +legacy environment that prevents proper boot. Then the following +commands can be used to boot the board: => ext4load mmc 1:1 0x01700000 /boot/uEnv-example.txt => env import -t 0x01700000 $filesize -- 2.30.2