From 3278ed0c9e6e563bc2ede8765a414c790f9a4ca1 Mon Sep 17 00:00:00 2001 From: Stu Grossman Date: Mon, 21 Apr 1997 16:51:22 +0000 Subject: [PATCH] * remote-pa.c: Remove. It's broken and no longer necessary. --- gdb/ChangeLog | 4 + gdb/remote-pa.c | 1561 ----------------------------------------------- 2 files changed, 4 insertions(+), 1561 deletions(-) delete mode 100644 gdb/remote-pa.c diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 40c47f3ba86..85c4f21bfa8 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,7 @@ +Mon Apr 21 09:49:25 1997 Stu Grossman (grossman@critters.cygnus.com) + + * remote-pa.c: Remove. It's broken and no longer necessary. + Sat Apr 19 11:56:10 1997 Per Bothner * java-exp.y: Combine TRUE and FALSE into BOOLEAN_LITERAL. diff --git a/gdb/remote-pa.c b/gdb/remote-pa.c deleted file mode 100644 index 3fc422ff5ce..00000000000 --- a/gdb/remote-pa.c +++ /dev/null @@ -1,1561 +0,0 @@ -/* Remote target communications for serial-line targets in custom GDB protocol - Copyright 1988, 1991, 1992, 1993, 1994 Free Software Foundation, Inc. - -This file is part of GDB. - -This program is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program; if not, write to the Free Software -Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - -/* Remote communication protocol. - - A debug packet whose contents are - is encapsulated for transmission in the form: - - $ # CSUM1 CSUM2 - - must be ASCII alphanumeric and cannot include characters - '$' or '#'. If starts with two characters followed by - ':', then the existing stubs interpret this as a sequence number. - - CSUM1 and CSUM2 are ascii hex representation of an 8-bit - checksum of , the most significant nibble is sent first. - the hex digits 0-9,a-f are used. - - Receiver responds with: - - + - if CSUM is correct and ready for next packet - - - if CSUM is incorrect - - is as follows: - All values are encoded in ascii hex digits. - - Request Packet - - read registers g - reply XX....X Each byte of register data - is described by two hex digits. - Registers are in the internal order - for GDB, and the bytes in a register - are in the same order the machine uses. - or ENN for an error. - - write regs GXX..XX Each byte of register data - is described by two hex digits. - reply OK for success - ENN for an error - - write reg Pn...=r... Write register n... with value r..., - which contains two hex digits for each - byte in the register (target byte - order). - reply OK for success - ENN for an error - (not supported by all stubs). - - read mem mAA..AA,LLLL AA..AA is address, LLLL is length. - reply XX..XX XX..XX is mem contents - Can be fewer bytes than requested - if able to read only part of the data. - or ENN NN is errno - - write mem MAA..AA,LLLL:XX..XX - AA..AA is address, - LLLL is number of bytes, - XX..XX is data - reply OK for success - ENN for an error (this includes the case - where only part of the data was - written). - - cont cAA..AA AA..AA is address to resume - If AA..AA is omitted, - resume at same address. - - step sAA..AA AA..AA is address to resume - If AA..AA is omitted, - resume at same address. - - last signal ? Reply the current reason for stopping. - This is the same reply as is generated - for step or cont : SAA where AA is the - signal number. - - There is no immediate reply to step or cont. - The reply comes when the machine stops. - It is SAA AA is the "signal number" - - or... TAAn...:r...;n:r...;n...:r...; - AA = signal number - n... = register number - r... = register contents - or... WAA The process exited, and AA is - the exit status. This is only - applicable for certains sorts of - targets. - kill request k - - toggle debug d toggle debug flag (see 386 & 68k stubs) - reset r reset -- see sparc stub. - reserved On other requests, the stub should - ignore the request and send an empty - response ($#). This way - we can extend the protocol and GDB - can tell whether the stub it is - talking to uses the old or the new. - search tAA:PP,MM Search backwards starting at address - AA for a match with pattern PP and - mask MM. PP and MM are 4 bytes. - Not supported by all stubs. - - general query qXXXX Request info about XXXX. - general set QXXXX=yyyy Set value of XXXX to yyyy. - query sect offs qOffsets Get section offsets. Reply is - Text=xxx;Data=yyy;Bss=zzz - console output Otext Send text to stdout. Only comes from - remote target. - - Responses can be run-length encoded to save space. A '*' means that - the next character is an ASCII encoding giving a repeat count which - stands for that many repititions of the character preceding the '*'. - The encoding is n+29, yielding a printable character where n >=3 - (which is where rle starts to win). Don't use an n > 126. - - So - "0* " means the same as "0000". */ - -#include "defs.h" -#include "gdb_string.h" -#include -#include "frame.h" -#include "inferior.h" -#include "bfd.h" -#include "symfile.h" -#include "target.h" -#include "wait.h" -#include "terminal.h" -#include "gdbcmd.h" -#include "objfiles.h" -#include "gdb-stabs.h" -#include "remote-utils.h" -#include "dcache.h" - -#ifdef USG -#include -#endif - -#include -#include "serial.h" - -/* Prototypes for local functions */ - -static int -remote_remove_breakpoint PARAMS ((CORE_ADDR, char *)); - -static int -remote_insert_breakpoint PARAMS ((CORE_ADDR, char *)); - -static void -remote_mourn PARAMS ((void)); - -static void -remote_kill PARAMS ((void)); - -static int -read_frame PARAMS ((char *)); - -static void -boot_board PARAMS ((char *, int)); - -static int -remote_write_bytes PARAMS ((CORE_ADDR memaddr, char *myaddr, int len)); - -static int -remote_read_bytes PARAMS ((CORE_ADDR memaddr, char *myaddr, int len)); - -static void -remote_files_info PARAMS ((struct target_ops *ignore)); - -static int -remote_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len, - int should_write, struct target_ops *target)); - -static void -remote_prepare_to_store PARAMS ((void)); - -static void -remote_fetch_registers PARAMS ((int regno)); - -static void -remote_resume PARAMS ((int pid, int step, enum target_signal siggnal)); - -static int -remote_start_remote PARAMS ((char *dummy)); - -static void -remote_open PARAMS ((char *name, int from_tty)); - -static void -remote_close PARAMS ((int quitting)); - -static void -remote_store_registers PARAMS ((int regno)); - -static void -getpkt PARAMS ((char *buf, int forever)); - -static void -putpkt PARAMS ((char *buf)); - -static void -remote_send PARAMS ((char *buf)); - -static int -readchar PARAMS ((int timeout)); - -static int -remote_wait PARAMS ((int pid, struct target_waitstatus *status)); - -static int -tohex PARAMS ((int nib)); - -static int -fromhex PARAMS ((int a)); - -static void -remote_detach PARAMS ((char *args, int from_tty)); - -static void -remote_interrupt PARAMS ((int signo)); - -static void -remote_interrupt_twice PARAMS ((int signo)); - -static void -interrupt_query PARAMS ((void)); - -static void -hppro_load PARAMS ((char *name, int from_tty)); - -extern struct target_ops remote_ops; /* Forward decl */ - -/* This was 5 seconds, which is a long time to sit and wait. - Unless this is going though some terminal server or multiplexer or - other form of hairy serial connection, I would think 2 seconds would - be plenty. */ -static int remote_timeout = 2; - -/* Descriptor for I/O to remote machine. Initialize it to NULL so that - remote_open knows that we don't have a file open when the program - starts. */ -extern serial_t remote_desc; - -/* Having this larger than 400 causes us to be incompatible with m68k-stub.c - and i386-stub.c. Normally, no one would notice because it only matters - for writing large chunks of memory (e.g. in downloads). Also, this needs - to be more than 400 if required to hold the registers (see below, where - we round it up based on REGISTER_BYTES). */ -#define PBUFSIZ 400 - -/* Maximum number of bytes to read/write at once. The value here - is chosen to fill up a packet (the headers account for the 32). */ -#define MAXBUFBYTES ((PBUFSIZ-32)/2) - -/* Round up PBUFSIZ to hold all the registers, at least. */ -/* The blank line after the #if seems to be required to work around a - bug in HP's PA compiler. */ -#if REGISTER_BYTES > MAXBUFBYTES - -#undef PBUFSIZ -#define PBUFSIZ (REGISTER_BYTES * 2 + 32) -#endif - -/* Should we try the 'P' request? If this is set to one when the stub - doesn't support 'P', the only consequence is some unnecessary traffic. */ -static int stub_supports_P = 1; - -/* sets the download protocol, choices are srec, generic, boot */ -char *loadtype; -static char *loadtype_str; -static void set_loadtype_command -PARAMS ((char *, int, struct cmd_list_element *)); - -static void -hppro_load (file, from_tty) - char *file; - int from_tty; -{ - puts ("Loading... HA!"); -} - - -/* Clean up connection to a remote debugger. */ - -/* ARGSUSED */ -static void -remote_close (quitting) - int quitting; -{ - if (remote_desc) - SERIAL_CLOSE (remote_desc); - remote_desc = NULL; -} - -/* Query the remote side for the text, data and bss offsets. */ - -#if 0 - -static void -get_offsets () -{ - unsigned char buf[PBUFSIZ]; - int nvals; - CORE_ADDR text_addr, data_addr, bss_addr; - struct section_offsets *offs; - - putpkt ("qOffsets"); - - getpkt (buf, 0); - - if (buf[0] == '\000') - return; /* Return silently. Stub doesn't support this - command. */ - if (buf[0] == 'E') - { - warning ("Remote failure reply: %s", buf); - return; - } - - nvals = sscanf (buf, "Text=%lx;Data=%lx;Bss=%lx", &text_addr, &data_addr, - &bss_addr); - if (nvals != 3) - error ("Malformed response to offset query, %s", buf); - - if (symfile_objfile == NULL) - return; - - offs = (struct section_offsets *) alloca (sizeof (struct section_offsets) - + symfile_objfile->num_sections - * sizeof (offs->offsets)); - memcpy (offs, symfile_objfile->section_offsets, - sizeof (struct section_offsets) - + symfile_objfile->num_sections - * sizeof (offs->offsets)); - - /* FIXME: This code assumes gdb-stabs.h is being used; it's broken - for xcoff, dwarf, sdb-coff, etc. But there is no simple - canonical representation for this stuff. (Just what does "text" - as seen by the stub mean, anyway? I think it means all sections - with SEC_CODE set, but we currently have no way to deal with that). */ - - ANOFFSET (offs, SECT_OFF_TEXT) = text_addr; - - /* This is a temporary kludge to force data and bss to use the same offsets - because that's what nlmconv does now. The real solution requires changes - to the stub and remote.c that I don't have time to do right now. */ - - ANOFFSET (offs, SECT_OFF_DATA) = data_addr; - ANOFFSET (offs, SECT_OFF_BSS) = data_addr; - - objfile_relocate (symfile_objfile, offs); -} - -#endif /* unused */ - -#define INBUFSIZE 10 - -static void -boot_board (dummy1, dummy2) - char *dummy1; - int dummy2; -{ - char c; - char buf[INBUFSIZE]; - char *ptr; - - /* See if we can connect to the boot ROM command line */ - ptr = buf; - while (1) { - SERIAL_WRITE (remote_desc, "\r\n", 2); - c = readchar (2); - if ((sr_get_debug() > 2) && (isascii(c))) - putchar (c); - if (c == SERIAL_TIMEOUT) { - if (sr_get_debug()) - puts_filtered ("Timed out.\n"); - break; - } - if (c == '&') { - if (sr_get_debug() > 2) - puts ("Got ACK from stub"); - break; - } - if (c == '>') { - if (sr_get_debug() > 2) - puts ("Got prompt from ROM monitor"); - break; - } - } - -} - -/* Stub for catch_errors. */ -static int -remote_start_remote (dummy) - char *dummy; -{ - immediate_quit = 1; /* Allow user to interrupt it */ - - /* Ack any packet which the remote side has already sent. */ - - if (sr_get_debug()) - puts ("Trying a '+' to ACK the target."); - - SERIAL_WRITE (remote_desc, "+", 1); - -#if 0 - boot_board(); - - get_offsets (); /* Get text, data & bss offsets */ -#endif - - putpkt ("?"); /* initiate a query from remote machine */ - immediate_quit = 0; - - start_remote (); /* Initialize gdb process mechanisms */ - - return 1; -} - -/* Open a connection to a remote debugger. - NAME is the filename used for communication. */ - -static DCACHE *remote_dcache; - -static void -remote_open (name, from_tty) - char *name; - int from_tty; -{ - if (name == 0) - error ( -"To open a remote debug connection, you need to specify what serial\n\ -device is attached to the remote system (e.g. /dev/ttya)."); - - target_preopen (from_tty); - - unpush_target (&remote_ops); - - remote_dcache = dcache_init (remote_read_bytes, remote_write_bytes); - - remote_desc = SERIAL_OPEN (name); - if (!remote_desc) - perror_with_name (name); - - if (baud_rate != -1) - { - if (SERIAL_SETBAUDRATE (remote_desc, baud_rate)) - { - SERIAL_CLOSE (remote_desc); - perror_with_name (name); - } - } - - SERIAL_RAW (remote_desc); - - /* If there is something sitting in the buffer we might take it as a - response to a command, which would be bad. */ - SERIAL_FLUSH_INPUT (remote_desc); - - if (from_tty) - { - puts_filtered ("Remote debugging using "); - puts_filtered (name); - puts_filtered ("\n"); - } - push_target (&remote_ops); /* Switch to using remote target now */ - - /* Start out by trying the 'P' request to set registers. We set this each - time that we open a new target so that if the user switches from one - stub to another, we can (if the target is closed and reopened) cope. */ - stub_supports_P = 1; - - /* Without this, some commands which require an active target (such as kill) - won't work. This variable serves (at least) double duty as both the pid - of the target process (if it has such), and as a flag indicating that a - target is active. These functions should be split out into seperate - variables, especially since GDB will someday have a notion of debugging - several processes. */ - - inferior_pid = 42000; - - /* Start the remote connection; if error (0), discard this target. - In particular, if the user quits, be sure to discard it - (we'd be in an inconsistent state otherwise). */ - if (!catch_errors (remote_start_remote, (char *)0, - "Couldn't establish connection to remote target\n", RETURN_MASK_ALL)) - pop_target(); -} - -/* remote_detach() - takes a program previously attached to and detaches it. - We better not have left any breakpoints - in the program or it'll die when it hits one. - Close the open connection to the remote debugger. - Use this when you want to detach and do something else - with your gdb. */ - -static void -remote_detach (args, from_tty) - char *args; - int from_tty; -{ - if (args) - error ("Argument given to \"detach\" when remotely debugging."); - - pop_target (); - if (from_tty) - puts_filtered ("Ending remote debugging.\n"); -} - -/* Convert hex digit A to a number. */ - -static int -fromhex (a) - int a; -{ - if (a >= '0' && a <= '9') - return a - '0'; - else if (a >= 'a' && a <= 'f') - return a - 'a' + 10; - else - error ("Reply contains invalid hex digit"); -} - -/* Convert number NIB to a hex digit. */ - -static int -tohex (nib) - int nib; -{ - if (nib < 10) - return '0'+nib; - else - return 'a'+nib-10; -} - -/* Tell the remote machine to resume. */ - -static void -remote_resume (pid, step, siggnal) - int pid, step; - enum target_signal siggnal; -{ - char buf[PBUFSIZ]; - - if (siggnal) - { - target_terminal_ours_for_output (); - printf_filtered - ("Can't send signals to a remote system. %s not sent.\n", - target_signal_to_name (siggnal)); target_terminal_inferior (); - } - - dcache_flush (remote_dcache); - - strcpy (buf, step ? "s": "c"); - - putpkt (buf); -} - -/* Send ^C to target to halt it. Target will respond, and send us a - packet. */ - -static void -remote_interrupt (signo) - int signo; -{ - /* If this doesn't work, try more severe steps. */ - signal (signo, remote_interrupt_twice); - - if (remote_debug) - printf_unfiltered ("remote_interrupt called\n"); - - SERIAL_WRITE (remote_desc, "\003", 1); /* Send a ^C */ -} - -static void (*ofunc)(); - -/* The user typed ^C twice. */ -static void -remote_interrupt_twice (signo) - int signo; -{ - signal (signo, ofunc); - - interrupt_query (); - - signal (signo, remote_interrupt); -} - -/* Ask the user what to do when an interrupt is received. */ - -static void -interrupt_query () -{ - target_terminal_ours (); - - if (query ("Interrupted while waiting for the program.\n\ -Give up (and stop debugging it)? ")) - { - target_mourn_inferior (); - return_to_top_level (RETURN_QUIT); - } - - target_terminal_inferior (); -} - -/* Wait until the remote machine stops, then return, - storing status in STATUS just as `wait' would. - Returns "pid" (though it's not clear what, if anything, that - means in the case of this target). */ - -static int -remote_wait (pid, status) - int pid; - struct target_waitstatus *status; -{ - unsigned char buf[PBUFSIZ]; - - status->kind = TARGET_WAITKIND_EXITED; - status->value.integer = 0; - - while (1) - { - unsigned char *p; - - ofunc = (void (*)()) signal (SIGINT, remote_interrupt); - getpkt ((char *) buf, 1); - signal (SIGINT, ofunc); - - switch (buf[0]) - { - case 'E': /* Error of some sort */ - warning ("Remote failure reply: %s", buf); - continue; - case 'T': /* Status with PC, SP, FP, ... */ - { - int i; - long regno; - char regs[MAX_REGISTER_RAW_SIZE]; - - /* Expedited reply, containing Signal, {regno, reg} repeat */ - /* format is: 'Tssn...:r...;n...:r...;n...:r...;#cc', where - ss = signal number - n... = register number - r... = register contents - */ - - p = &buf[3]; /* after Txx */ - - while (*p) - { - unsigned char *p1; - - regno = strtol (p, (char **) &p1, 16); /* Read the register number */ - - if (p1 == p) - warning ("Remote sent badly formed register number: %s\nPacket: '%s'\n", - p1, buf); - - p = p1; - - if (*p++ != ':') - warning ("Malformed packet (missing colon): %s\nPacket: '%s'\n", - p, buf); - - if (regno >= NUM_REGS) - warning ("Remote sent bad register number %d: %s\nPacket: '%s'\n", - regno, p, buf); - - for (i = 0; i < REGISTER_RAW_SIZE (regno); i++) - { - if (p[0] == 0 || p[1] == 0) - warning ("Remote reply is too short: %s", buf); - regs[i] = fromhex (p[0]) * 16 + fromhex (p[1]); - p += 2; - } - - if (*p++ != ';') - warning ("Remote register badly formatted: %s", buf); - - supply_register (regno, regs); - } - } - /* fall through */ - case 'S': /* Old style status, just signal only */ - status->kind = TARGET_WAITKIND_STOPPED; - status->value.sig = (enum target_signal) - (((fromhex (buf[1])) << 4) + (fromhex (buf[2]))); - - return inferior_pid; - case 'W': /* Target exited */ - { - /* The remote process exited. */ - status->kind = TARGET_WAITKIND_EXITED; - status->value.integer = (fromhex (buf[1]) << 4) + fromhex (buf[2]); - return inferior_pid; - } - case 'O': /* Console output */ - fputs_filtered (buf + 1, gdb_stdout); - continue; - default: - warning ("Invalid remote reply: %s", buf); - continue; - } - } - return inferior_pid; -} - -/* Number of bytes of registers this stub implements. */ -static int register_bytes_found; - -/* Read the remote registers into the block REGS. */ -/* Currently we just read all the registers, so we don't use regno. */ -/* ARGSUSED */ -static void -remote_fetch_registers (regno) - int regno; -{ - char buf[PBUFSIZ]; - int i; - char *p; - char regs[REGISTER_BYTES]; - - sprintf (buf, "g"); - remote_send (buf); - - /* Unimplemented registers read as all bits zero. */ - memset (regs, 0, REGISTER_BYTES); - - /* We can get out of synch in various cases. If the first character - in the buffer is not a hex character, assume that has happened - and try to fetch another packet to read. */ - while ((buf[0] < '0' || buf[0] > '9') - && (buf[0] < 'a' || buf[0] > 'f')) - { - if (remote_debug) - printf_unfiltered ("Bad register packet; fetching a new packet\n"); - getpkt (buf, 0); - } - - /* Reply describes registers byte by byte, each byte encoded as two - hex characters. Suck them all up, then supply them to the - register cacheing/storage mechanism. */ - - p = buf; - for (i = 0; i < REGISTER_BYTES; i++) - { - if (p[0] == 0) - break; - if (p[1] == 0) - { - warning ("Remote reply is of odd length: %s", buf); - /* Don't change register_bytes_found in this case, and don't - print a second warning. */ - goto supply_them; - } - regs[i] = fromhex (p[0]) * 16 + fromhex (p[1]); - p += 2; - } - - if (i != register_bytes_found) - { - register_bytes_found = i; -#ifdef REGISTER_BYTES_OK - if (!REGISTER_BYTES_OK (i)) - warning ("Remote reply is too short: %s", buf); -#endif - } - - supply_them: - for (i = 0; i < NUM_REGS; i++) - supply_register (i, ®s[REGISTER_BYTE(i)]); -} - -/* Prepare to store registers. Since we may send them all (using a - 'G' request), we have to read out the ones we don't want to change - first. */ - -static void -remote_prepare_to_store () -{ - /* Make sure the entire registers array is valid. */ - read_register_bytes (0, (char *)NULL, REGISTER_BYTES); -} - -/* Store register REGNO, or all registers if REGNO == -1, from the contents - of REGISTERS. FIXME: ignores errors. */ - -static void -remote_store_registers (regno) - int regno; -{ - char buf[PBUFSIZ]; - int i; - char *p; - - if (regno >= 0 && stub_supports_P) - { - /* Try storing a single register. */ - char *regp; - - sprintf (buf, "P%x=", regno); - p = buf + strlen (buf); - regp = ®isters[REGISTER_BYTE (regno)]; - for (i = 0; i < REGISTER_RAW_SIZE (regno); ++i) - { - *p++ = tohex ((regp[i] >> 4) & 0xf); - *p++ = tohex (regp[i] & 0xf); - } - *p = '\0'; - remote_send (buf); - if (buf[0] != '\0') - { - /* The stub understands the 'P' request. We are done. */ - return; - } - - /* The stub does not support the 'P' request. Use 'G' instead, - and don't try using 'P' in the future (it will just waste our - time). */ - stub_supports_P = 0; - } - - buf[0] = 'G'; - - /* Command describes registers byte by byte, - each byte encoded as two hex characters. */ - - p = buf + 1; - /* remote_prepare_to_store insures that register_bytes_found gets set. */ - for (i = 0; i < register_bytes_found; i++) - { - *p++ = tohex ((registers[i] >> 4) & 0xf); - *p++ = tohex (registers[i] & 0xf); - } - *p = '\0'; - - remote_send (buf); -} - -#if 0 - -/* Use of the data cache is disabled because it loses for looking at - and changing hardware I/O ports and the like. Accepting `volatile' - would perhaps be one way to fix it. Another idea would be to use the - executable file for the text segment (for all SEC_CODE sections? - For all SEC_READONLY sections?). This has problems if you want to - actually see what the memory contains (e.g. self-modifying code, - clobbered memory, user downloaded the wrong thing). */ - -/* Read a word from remote address ADDR and return it. - This goes through the data cache. */ - -static int -remote_fetch_word (addr) - CORE_ADDR addr; -{ - return dcache_fetch (remote_dcache, addr); -} - -/* Write a word WORD into remote address ADDR. - This goes through the data cache. */ - -static void -remote_store_word (addr, word) - CORE_ADDR addr; - int word; -{ - dcache_poke (remote_dcache, addr, word); -} -#endif /* 0 */ - -/* Write memory data directly to the remote machine. - This does not inform the data cache; the data cache uses this. - MEMADDR is the address in the remote memory space. - MYADDR is the address of the buffer in our space. - LEN is the number of bytes. - - Returns number of bytes transferred, or 0 for error. */ - -static int -remote_write_bytes (memaddr, myaddr, len) - CORE_ADDR memaddr; - char *myaddr; - int len; -{ - char buf[PBUFSIZ]; - int i; - char *p; - - /* FIXME-32x64: Need a version of print_address_numeric which puts the - result in a buffer like sprintf. */ - sprintf (buf, "M%lx,%x:", (unsigned long) memaddr, len); - - /* We send target system values byte by byte, in increasing byte addresses, - each byte encoded as two hex characters. */ - - p = buf + strlen (buf); - for (i = 0; i < len; i++) - { - *p++ = tohex ((myaddr[i] >> 4) & 0xf); - *p++ = tohex (myaddr[i] & 0xf); - } - *p = '\0'; - - putpkt (buf); - getpkt (buf, 0); - - if (buf[0] == 'E') - { - /* There is no correspondance between what the remote protocol uses - for errors and errno codes. We would like a cleaner way of - representing errors (big enough to include errno codes, bfd_error - codes, and others). But for now just return EIO. */ - errno = EIO; - return 0; - } - return len; -} - -/* Read memory data directly from the remote machine. - This does not use the data cache; the data cache uses this. - MEMADDR is the address in the remote memory space. - MYADDR is the address of the buffer in our space. - LEN is the number of bytes. - - Returns number of bytes transferred, or 0 for error. */ - -static int -remote_read_bytes (memaddr, myaddr, len) - CORE_ADDR memaddr; - char *myaddr; - int len; -{ - char buf[PBUFSIZ]; - int i; - char *p; - - if (len > PBUFSIZ / 2 - 1) - abort (); - - /* FIXME-32x64: Need a version of print_address_numeric which puts the - result in a buffer like sprintf. */ - sprintf (buf, "m%lx,%x", (unsigned long) memaddr, len); - putpkt (buf); - getpkt (buf, 0); - - if (buf[0] == 'E') - { - /* There is no correspondance between what the remote protocol uses - for errors and errno codes. We would like a cleaner way of - representing errors (big enough to include errno codes, bfd_error - codes, and others). But for now just return EIO. */ - errno = EIO; - return 0; - } - - /* Reply describes memory byte by byte, - each byte encoded as two hex characters. */ - - p = buf; - for (i = 0; i < len; i++) - { - if (p[0] == 0 || p[1] == 0) - /* Reply is short. This means that we were able to read only part - of what we wanted to. */ - break; - myaddr[i] = fromhex (p[0]) * 16 + fromhex (p[1]); - p += 2; - } - return i; -} - -/* Read or write LEN bytes from inferior memory at MEMADDR, transferring - to or from debugger address MYADDR. Write to inferior if SHOULD_WRITE is - nonzero. Returns length of data written or read; 0 for error. */ - -/* ARGSUSED */ -static int -remote_xfer_memory(memaddr, myaddr, len, should_write, target) - CORE_ADDR memaddr; - char *myaddr; - int len; - int should_write; - struct target_ops *target; /* ignored */ -{ - int xfersize; - int bytes_xferred; - int total_xferred = 0; - - while (len > 0) - { - if (len > MAXBUFBYTES) - xfersize = MAXBUFBYTES; - else - xfersize = len; - - if (should_write) - bytes_xferred = remote_write_bytes (memaddr, myaddr, xfersize); - else - bytes_xferred = remote_read_bytes (memaddr, myaddr, xfersize); - - /* If we get an error, we are done xferring. */ - if (bytes_xferred == 0) - break; - - memaddr += bytes_xferred; - myaddr += bytes_xferred; - len -= bytes_xferred; - total_xferred += bytes_xferred; - } - return total_xferred; -} - -#if 0 -/* Enable after 4.12. */ - -void -remote_search (len, data, mask, startaddr, increment, lorange, hirange - addr_found, data_found) - int len; - char *data; - char *mask; - CORE_ADDR startaddr; - int increment; - CORE_ADDR lorange; - CORE_ADDR hirange; - CORE_ADDR *addr_found; - char *data_found; -{ - if (increment == -4 && len == 4) - { - long mask_long, data_long; - long data_found_long; - CORE_ADDR addr_we_found; - char buf[PBUFSIZ]; - long returned_long[2]; - char *p; - - mask_long = extract_unsigned_integer (mask, len); - data_long = extract_unsigned_integer (data, len); - sprintf (buf, "t%x:%x,%x", startaddr, data_long, mask_long); - putpkt (buf); - getpkt (buf, 0); - if (buf[0] == '\0') - { - /* The stub doesn't support the 't' request. We might want to - remember this fact, but on the other hand the stub could be - switched on us. Maybe we should remember it only until - the next "target remote". */ - generic_search (len, data, mask, startaddr, increment, lorange, - hirange, addr_found, data_found); - return; - } - - if (buf[0] == 'E') - /* There is no correspondance between what the remote protocol uses - for errors and errno codes. We would like a cleaner way of - representing errors (big enough to include errno codes, bfd_error - codes, and others). But for now just use EIO. */ - memory_error (EIO, startaddr); - p = buf; - addr_we_found = 0; - while (*p != '\0' && *p != ',') - addr_we_found = (addr_we_found << 4) + fromhex (*p++); - if (*p == '\0') - error ("Protocol error: short return for search"); - - data_found_long = 0; - while (*p != '\0' && *p != ',') - data_found_long = (data_found_long << 4) + fromhex (*p++); - /* Ignore anything after this comma, for future extensions. */ - - if (addr_we_found < lorange || addr_we_found >= hirange) - { - *addr_found = 0; - return; - } - - *addr_found = addr_we_found; - *data_found = store_unsigned_integer (data_we_found, len); - return; - } - generic_search (len, data, mask, startaddr, increment, lorange, - hirange, addr_found, data_found); -} -#endif /* 0 */ - -static void -remote_files_info (ignore) - struct target_ops *ignore; -{ - puts_filtered ("Debugging a target over a serial line.\n"); -} - -/* Stuff for dealing with the packets which are part of this protocol. - See comment at top of file for details. */ - -/* Read a single character from the remote end, masking it down to 7 bits. */ - -static int -readchar (timeout) - int timeout; -{ - int ch; - - ch = SERIAL_READCHAR (remote_desc, timeout); - - switch (ch) - { - case SERIAL_EOF: - error ("Remote connection closed"); - case SERIAL_ERROR: - perror_with_name ("Remote communication error"); - case SERIAL_TIMEOUT: - return ch; - default: - return ch & 0x7f; - } -} - -/* Send the command in BUF to the remote machine, - and read the reply into BUF. - Report an error if we get an error reply. */ - -static void -remote_send (buf) - char *buf; -{ - - putpkt (buf); - getpkt (buf, 0); - - if (buf[0] == 'E') - error ("Remote failure reply: %s", buf); -} - -/* Send a packet to the remote machine, with error checking. - The data of the packet is in BUF. */ -static void -putpkt (buf) - char *buf; -{ - int i; - unsigned char csum = 0; - char buf2[PBUFSIZ]; - int cnt = strlen (buf); - int ch; - char *p; - - /* Copy the packet into buffer BUF2, encapsulating it - and giving it a checksum. */ - - if (cnt > sizeof(buf2) - 5) /* Prosanity check */ - abort(); - - p = buf2; - *p++ = '$'; - - for (i = 0; i < cnt; i++) - { - csum += buf[i]; - *p++ = buf[i]; - } - *p++ = '#'; - *p++ = tohex ((csum >> 4) & 0xf); - *p++ = tohex (csum & 0xf); - - /* Send it over and over until we get a positive ack. */ - - while (1) - { - int started_error_output = 0; - - if (remote_debug) - { - *p = '\0'; - printf_unfiltered ("Sending packet: %s...", buf2); - gdb_flush(gdb_stdout); - } - if (SERIAL_WRITE (remote_desc, buf2, p - buf2)) - perror_with_name ("putpkt: write failed"); - - /* read until either a timeout occurs (-2) or '+' is read */ - while (1) - { - ch = readchar (remote_timeout); - - if (remote_debug) - { - switch (ch) - { - case '+': - case SERIAL_TIMEOUT: - case '$': - if (started_error_output) - { - putchar_unfiltered ('\n'); - started_error_output = 0; - } - } - } - - switch (ch) - { - case '+': - if (remote_debug) - printf_unfiltered("Got Ack\n"); - return; - case SERIAL_TIMEOUT: - break; /* Retransmit buffer */ - case '$': - { - unsigned char junkbuf[PBUFSIZ]; - - /* It's probably an old response, and we're out of sync. Just - gobble up the packet and ignore it. */ - getpkt (junkbuf, 0); - continue; /* Now, go look for + */ - } - default: - if (remote_debug) - { - if (!started_error_output) - { - started_error_output = 1; - printf_unfiltered ("putpkt: Junk: "); - } - putchar_unfiltered (ch & 0177); - } - continue; - } - break; /* Here to retransmit */ - } - -#if 0 - /* This is wrong. If doing a long backtrace, the user should be - able to get out next time we call QUIT, without anything as violent - as interrupt_query. If we want to provide a way out of here - without getting to the next QUIT, it should be based on hitting - ^C twice as in remote_wait. */ - if (quit_flag) - { - quit_flag = 0; - interrupt_query (); - } -#endif - } -} - -/* Come here after finding the start of the frame. Collect the rest into BUF, - verifying the checksum, length, and handling run-length compression. - Returns 0 on any error, 1 on success. */ - -static int -read_frame (buf) - char *buf; -{ - unsigned char csum; - char *bp; - int c; - - csum = 0; - bp = buf; - - while (1) - { - c = readchar (remote_timeout); - - switch (c) - { - case SERIAL_TIMEOUT: - if (remote_debug) - puts_filtered ("Timeout in mid-packet, retrying\n"); - return 0; - case '$': - if (remote_debug) - puts_filtered ("Saw new packet start in middle of old one\n"); - return 0; /* Start a new packet, count retries */ - case '#': - { - unsigned char pktcsum; - - *bp = '\000'; - - pktcsum = fromhex (readchar (remote_timeout)) << 4; - pktcsum |= fromhex (readchar (remote_timeout)); - - if (csum == pktcsum) - return 1; - - printf_filtered ("Bad checksum, sentsum=0x%x, csum=0x%x, buf=", - pktcsum, csum); - puts_filtered (buf); - puts_filtered ("\n"); - - return 0; - } - case '*': /* Run length encoding */ - csum += c; - c = readchar (remote_timeout); - csum += c; - c = c - ' ' + 3; /* Compute repeat count */ - - if (bp + c - 1 < buf + PBUFSIZ - 1) - { - memset (bp, *(bp - 1), c); - bp += c; - continue; - } - - *bp = '\0'; - printf_filtered ("Repeat count %d too large for buffer: ", c); - puts_filtered (buf); - puts_filtered ("\n"); - return 0; - - default: - if (bp < buf + PBUFSIZ - 1) - { - *bp++ = c; - csum += c; - continue; - } - - *bp = '\0'; - puts_filtered ("Remote packet too long: "); - puts_filtered (buf); - puts_filtered ("\n"); - - return 0; - } - } -} - -/* Read a packet from the remote machine, with error checking, - and store it in BUF. BUF is expected to be of size PBUFSIZ. - If FOREVER, wait forever rather than timing out; this is used - while the target is executing user code. */ - -static void -getpkt (buf, forever) - char *buf; - int forever; -{ - int c; - int tries; - int timeout; - int val; - - if (forever) - timeout = -1; - else - timeout = remote_timeout; - -#define MAX_TRIES 10 - - for (tries = 1; tries <= MAX_TRIES; tries++) - { - /* This can loop forever if the remote side sends us characters - continuously, but if it pauses, we'll get a zero from readchar - because of timeout. Then we'll count that as a retry. */ - - /* Note that we will only wait forever prior to the start of a packet. - After that, we expect characters to arrive at a brisk pace. They - should show up within remote_timeout intervals. */ - - do - { - c = readchar (timeout); - - if (c == SERIAL_TIMEOUT) - { - if (remote_debug) - puts_filtered ("Timed out.\n"); - goto retry; - } - } - while (c != '$'); - - /* We've found the start of a packet, now collect the data. */ - - val = read_frame (buf); - - if (val == 1) - { - if (remote_debug) - fprintf_unfiltered (gdb_stderr, "Packet received: %s\n", buf); - SERIAL_WRITE (remote_desc, "+", 1); - return; - } - - /* Try the whole thing again. */ -retry: - SERIAL_WRITE (remote_desc, "-", 1); - } - - /* We have tried hard enough, and just can't receive the packet. Give up. */ - - printf_unfiltered ("Ignoring packet error, continuing...\n"); - SERIAL_WRITE (remote_desc, "+", 1); -} - -static void -remote_kill () -{ - putpkt ("k"); - /* Don't wait for it to die. I'm not really sure it matters whether - we do or not. For the existing stubs, kill is a noop. */ - target_mourn_inferior (); -} - -static void -remote_mourn () -{ - unpush_target (&remote_ops); - generic_mourn_inferior (); -} - -#ifdef REMOTE_BREAKPOINT - -/* On some machines, e.g. 68k, we may use a different breakpoint instruction - than other targets. */ -static unsigned char break_insn[] = REMOTE_BREAKPOINT; - -#else /* No REMOTE_BREAKPOINT. */ - -/* Same old breakpoint instruction. This code does nothing different - than mem-break.c. */ -static unsigned char break_insn[] = BREAKPOINT; - -#endif /* No REMOTE_BREAKPOINT. */ - -/* Insert a breakpoint on targets that don't have any better breakpoint - support. We read the contents of the target location and stash it, - then overwrite it with a breakpoint instruction. ADDR is the target - location in the target machine. CONTENTS_CACHE is a pointer to - memory allocated for saving the target contents. It is guaranteed - by the caller to be long enough to save sizeof BREAKPOINT bytes (this - is accomplished via BREAKPOINT_MAX). */ - -static int -remote_insert_breakpoint (addr, contents_cache) - CORE_ADDR addr; - char *contents_cache; -{ - int val; - - val = target_read_memory (addr, contents_cache, sizeof break_insn); - - if (val == 0) - val = target_write_memory (addr, (char *)break_insn, sizeof break_insn); - - return val; -} - -static int -remote_remove_breakpoint (addr, contents_cache) - CORE_ADDR addr; - char *contents_cache; -{ - return target_write_memory (addr, contents_cache, sizeof break_insn); -} - -/* Define the target subroutine names */ - -struct target_ops remote_hppro_ops = { - "hppro", /* to_shortname */ - "Remote serial target for HP-PRO targets", /* to_longname */ - "Use a remote computer via a serial line, using a gdb-specific protocol.\n\ -This is for targets that supports the HP-PRO standard.\n\ -Specify the serial device it is connected to (e.g. /dev/ttya) or telnet port.", /* to_doc */ - remote_open, /* to_open */ - remote_close, /* to_close */ - NULL, /* to_attach */ - remote_detach, /* to_detach */ - remote_resume, /* to_resume */ - remote_wait, /* to_wait */ - remote_fetch_registers, /* to_fetch_registers */ - remote_store_registers, /* to_store_registers */ - remote_prepare_to_store, /* to_prepare_to_store */ - remote_xfer_memory, /* to_xfer_memory */ - remote_files_info, /* to_files_info */ - - remote_insert_breakpoint, /* to_insert_breakpoint */ - remote_remove_breakpoint, /* to_remove_breakpoint */ - - NULL, /* to_terminal_init */ - NULL, /* to_terminal_inferior */ - NULL, /* to_terminal_ours_for_output */ - NULL, /* to_terminal_ours */ - NULL, /* to_terminal_info */ - remote_kill, /* to_kill */ - hppro_load, /* to_load */ - NULL, /* to_lookup_symbol */ - NULL, /* to_create_inferior */ - remote_mourn, /* to_mourn_inferior */ - 0, /* to_can_run */ - 0, /* to_notice_signals */ - 0, /* to_thread_alive */ - 0, /* to_stop */ - process_stratum, /* to_stratum */ - NULL, /* to_next */ - 1, /* to_has_all_memory */ - 1, /* to_has_memory */ - 1, /* to_has_stack */ - 1, /* to_has_registers */ - 1, /* to_has_execution */ - NULL, /* sections */ - NULL, /* sections_end */ - OPS_MAGIC /* to_magic */ -}; - -void -_initialize_remote_hppro () -{ - struct cmd_list_element *c; - add_target (&remote_hppro_ops); - - /* this sets the type of download protocol */ - c = add_set_cmd ("loadtype", no_class, var_string, (char *)&loadtype_str, - "Set the type of the remote load protocol.\n", &setlist); - c->function.sfunc = set_loadtype_command; - add_show_from_set (c, &showlist); - loadtype_str = savestring ("generic", 8); - - /* this adds a command to boot the board */ - add_com ("boot", class_support, boot_board, - "Boot the damn target board.\n"); -} - -static void -set_loadtype_command (ignore, from_tty, c) - char *ignore; - int from_tty; - struct cmd_list_element *c; -{ - loadtype_str = savestring (*(char **) c->var, strlen (*(char **) c->var)); -} - -- 2.30.2