From 38dc5e123ff76ec9c9b58a780c84e74226374b83 Mon Sep 17 00:00:00 2001 From: Stu Grossman Date: Sat, 29 May 1993 01:33:36 +0000 Subject: [PATCH] * Makefile.in: Add new file ser-tcp.c. * defs.h (memcmp): Add decl for memcmp to #ifndef MEM_FNS_DECLARED. * findvar.c (write_register): See if we are writing back the same value that's already in the register. If so, don't bother. * remote.c (putpkt, getpkt): Improve handling of communication problems. * ser-go32.c: Prototype it to death. Update serial_ops and add dummy routines where appropriate. * ser-tcp.c: New module to implement serial I/O via TCP connections. * ser-unix.c: Clean up getting/setting of tty state. Get rid of SERIAL_RESTORE, add SERIAL_{GET|SET}_TTY_STATE interfaces. * serial.c: Add start of support for connect command. (serial_open): Distinguish between tcp and local devices. * serial.h (struct serial_ops): Get rid of restore, add get_tty_state and set_tty_state. Define protoypes and macros for this mess. * gdbserver/remote-utils.c: Add tcp support. (readchar): Do some real buffering. Handle error conditions gracefully. * gdbserver/remote-inflow-sparc.c: Update to remote-inflow.c (Lynx), remove lots of cruft. --- gdb/ChangeLog | 24 +++ gdb/Makefile.in | 4 +- gdb/defs.h | 21 ++- gdb/gdbserver/remote-inflow-sparc.c | 199 +++++--------------- gdb/gdbserver/remote-utils.c | 88 +++++++-- gdb/ser-go32.c | 60 ++++++- gdb/ser-tcp.c | 270 ++++++++++++++++++++++++++++ gdb/ser-unix.c | 227 +++++++++++++---------- gdb/serial.c | 165 +++++++++++------ gdb/serial.h | 21 ++- 10 files changed, 731 insertions(+), 348 deletions(-) create mode 100644 gdb/ser-tcp.c diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 429b9ee1e6f..f517e43022d 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,27 @@ +Fri May 28 17:18:05 1993 Stu Grossman (grossman@cygnus.com) + + * Makefile.in: Add new file ser-tcp.c. + * defs.h (memcmp): Add decl for memcmp to #ifndef MEM_FNS_DECLARED. + * findvar.c (write_register): See if we are writing back the same + value that's already in the register. If so, don't bother. + * remote.c (putpkt, getpkt): Improve handling of communication + problems. + * ser-go32.c: Prototype it to death. Update serial_ops and add + dummy routines where appropriate. + * ser-tcp.c: New module to implement serial I/O via TCP + connections. + * ser-unix.c: Clean up getting/setting of tty state. Get rid of + SERIAL_RESTORE, add SERIAL_{GET|SET}_TTY_STATE interfaces. + * serial.c: Add start of support for connect command. + (serial_open): Distinguish between tcp and local devices. + * serial.h (struct serial_ops): Get rid of restore, add + get_tty_state and set_tty_state. Define protoypes and macros for + this mess. + * gdbserver/remote-utils.c: Add tcp support. (readchar): Do + some real buffering. Handle error conditions gracefully. + * gdbserver/remote-inflow-sparc.c: Update to remote-inflow.c + (Lynx), remove lots of cruft. + Fri May 28 17:24:51 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) * printcmd.c (print_address_symbolic): turn this into an assigment diff --git a/gdb/Makefile.in b/gdb/Makefile.in index f88588a7906..0e345214033 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -185,7 +185,7 @@ RUNTESTFLAGS= # part of libiberty) a POSIX interface. But at least for now the # host-dependent makefile fragment might need to use something else # besides ser-unix.o -SER_HARDWIRE=ser-unix.o +SER_HARDWIRE=ser-unix.o ser-tcp.o # Host and target-dependent makefile fragments come in here. #### @@ -304,7 +304,7 @@ SFILES = ${srcdir}/blockframe.c ${srcdir}/breakpoint.c ${srcdir}/buildsym.c \ ${srcdir}/target.c ${srcdir}/typeprint.c ${srcdir}/utils.c \ ${srcdir}/valarith.c \ ${srcdir}/valops.c ${srcdir}/valprint.c ${srcdir}/values.c \ - ${srcdir}/serial.c ${srcdir}/ser-unix.c + ${srcdir}/serial.c ${srcdir}/ser-unix.c ${srcdir}/ser-tcp.c # Files that are not source code, but need to go into gdb-$(VERSION).tar.Z. NONSRC = ${srcdir}/Makefile.in ${srcdir}/depend ${srcdir}/alldeps.mak \ diff --git a/gdb/defs.h b/gdb/defs.h index 3d03b9a232a..031f2be1423 100644 --- a/gdb/defs.h +++ b/gdb/defs.h @@ -434,20 +434,23 @@ enum val_prettyprint /* Defaults for system-wide constants (if not defined by xm.h, we fake it). */ #if !defined (UINT_MAX) -#define UINT_MAX 0xffffffff -#endif - -#if !defined (LONG_MAX) -#define LONG_MAX 0x7fffffff +#define UINT_MAX ((unsigned int)(~0)) /* 0xFFFFFFFF for 32-bits */ #endif #if !defined (INT_MAX) -#define INT_MAX 0x7fffffff +#define INT_MAX (UINT_MAX >> 1) /* 0x7FFFFFFF for 32-bits */ #endif #if !defined (INT_MIN) -/* Two's complement, 32 bit. */ -#define INT_MIN -0x80000000 +#define INT_MIN (-INT_MAX - 1) /* 0x80000000 for 32-bits */ +#endif + +#if !defined (ULONG_MAX) +#define ULONG_MAX ((unsigned long)(~0L)) /* 0xFFFFFFFF for 32-bits */ +#endif + +#if !defined (LONG_MAX) +#define LONG_MAX ((long)(ULONG_MAX >> 1)) /* 0x7FFFFFFF for 32-bits */ #endif /* Number of bits in a char or unsigned char for the target machine. @@ -722,10 +725,10 @@ qsort PARAMS ((void *base, size_t nmemb, /* 4.10.5.2 */ #ifndef MEM_FNS_DECLARED /* Some non-ANSI use void *, not char *. */ extern PTR memcpy PARAMS ((void *, const void *, size_t)); /* 4.11.2.1 */ -#endif extern int memcmp PARAMS ((const void *, const void *, size_t)); /* 4.11.4.1 */ +#endif extern char * strchr PARAMS ((const char *, int)); /* 4.11.5.2 */ diff --git a/gdb/gdbserver/remote-inflow-sparc.c b/gdb/gdbserver/remote-inflow-sparc.c index 12b0b3aa8f4..e71f56ca7ac 100644 --- a/gdb/gdbserver/remote-inflow-sparc.c +++ b/gdb/gdbserver/remote-inflow-sparc.c @@ -1,9 +1,24 @@ -/* Low level interface to ptrace, for GDB when running under Unix. - Copyright (C) 1986, 1987 Free Software Foundation, Inc. -*/ +/* Low level interface to ptrace, for the remote server for GDB. + Copyright (C) 1986, 1987, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "defs.h" -#include "wait.h" +#include "/usr/include/sys/wait.h" #include "frame.h" #include "inferior.h" /*************************** @@ -38,12 +53,6 @@ extern int errno; extern int inferior_pid; void error (), quit (), perror_with_name (); int query (); -void supply_register (), write_register (); -CORE_ADDR read_register (); - -/* Nonzero if we are debugging an attached outside process - rather than an inferior. */ - /* Start an inferior process and returns its pid. ALLARGS is a vector of program-name and args. @@ -101,52 +110,52 @@ kill_inferior () /*************inferior_died ();****VK**************/ } -/* Resume execution of the inferior process. - If STEP is nonzero, single-step it. - If SIGNAL is nonzero, give it that signal. */ +/* Wait for process, returns status */ unsigned char -myresume (step, signal, status) - int step; - int signal; +mywait (status) char *status; { int pid; - WAITTYPE w; + union wait w; - errno = 0; - ptrace (step ? 9 : 7, inferior_pid, 1, signal); - if (errno) - perror_with_name ("ptrace"); pid = wait (&w); if (pid != inferior_pid) perror_with_name ("wait"); - fetch_inferior_registers (0); - if (WIFEXITED (w)) { - printf ("\nChild exited with retcode = %x \n", WEXITSTATUS (w)); + fprintf (stderr, "\nChild exited with retcode = %x \n", WEXITSTATUS (w)); *status = 'E'; return ((unsigned char) WEXITSTATUS (w)); } else if (!WIFSTOPPED (w)) { - printf ("\nChild terminated with signal = %x \n", WTERMSIG (w)); + fprintf (stderr, "\nChild terminated with signal = %x \n", WTERMSIG (w)); *status = 'T'; return ((unsigned char) WTERMSIG (w)); } - else - { - printf ("\nChild stopped with signal = %x \n", WSTOPSIG (w)); - *status = 'S'; - return ((unsigned char) WSTOPSIG (w)); - } + + fetch_inferior_registers (0); + + *status = 'S'; + return ((unsigned char) WSTOPSIG (w)); } -#define INT_REGS 1 -#define STACK_REGS 2 -#define FP_REGS 4 +/* Resume execution of the inferior process. + If STEP is nonzero, single-step it. + If SIGNAL is nonzero, give it that signal. */ + +void +myresume (step, signal) + int step; + int signal; +{ + errno = 0; + ptrace (step ? PTRACE_SINGLESTEP : PTRACE_CONT, inferior_pid, 1, signal); + if (errno) + perror_with_name ("ptrace"); +} /* Fetch one or more registers from the inferior. REGNO == -1 to get them all. We actually fetch more than requested, when convenient, @@ -234,63 +243,6 @@ store_inferior_registers (ignored) perror("ptrace_setfpregs"); } -#if 0 -void -fetch_inferior_registers () -{ - struct regs inferior_registers; - struct fp_status inferior_fp_registers; - extern char registers[]; - - ptrace (PTRACE_GETREGS, inferior_pid, &inferior_registers); - if (errno) - perror_with_name ("ptrace"); - /**********debugging begin **********/ - print_some_registers (&inferior_registers); - /**********debugging end **********/ - ptrace (PTRACE_GETFPREGS, inferior_pid, &inferior_fp_registers); - if (errno) - perror_with_name ("ptrace"); - - bcopy (&inferior_registers, registers, 16 * 4); - bcopy (&inferior_fp_registers, ®isters[REGISTER_BYTE (FP0_REGNUM)], - sizeof inferior_fp_registers.fpu_regs); - *(int *) ®isters[REGISTER_BYTE (PS_REGNUM)] = inferior_registers.r_ps; - *(int *) ®isters[REGISTER_BYTE (PC_REGNUM)] = inferior_registers.r_pc; - bcopy (&inferior_fp_registers.fpu_flags, - ®isters[REGISTER_BYTE (FPC_REGNUM)], - sizeof inferior_fp_registers - sizeof inferior_fp_registers.fpu_regs); -} - -/* Store our register values back into the inferior. - If REGNO is -1, do this for all registers. - Otherwise, REGNO specifies which register (so we can save time). */ - -store_inferior_registers (regno) - int regno; -{ - struct regs inferior_registers; - struct fp_status inferior_fp_registers; - extern char registers[]; - - bcopy (registers, &inferior_registers, 16 * 4); - bcopy (®isters[REGISTER_BYTE (FP0_REGNUM)], &inferior_fp_registers, - sizeof inferior_fp_registers.fps_regs); - inferior_registers.r_ps = *(int *) ®isters[REGISTER_BYTE (PS_REGNUM)]; - inferior_registers.r_pc = *(int *) ®isters[REGISTER_BYTE (PC_REGNUM)]; - bcopy (®isters[REGISTER_BYTE (FPC_REGNUM)], - &inferior_fp_registers.fps_control, - sizeof inferior_fp_registers - sizeof inferior_fp_registers.fps_regs); - - ptrace (PTRACE_SETREGS, inferior_pid, &inferior_registers); - if (errno) - perror_with_name ("ptrace"); - ptrace (PTRACE_SETFPREGS, inferior_pid, &inferior_fp_registers); - if (errno) - perror_with_name ("ptrace"); -} -#endif /* 0 */ - /* NOTE! I tried using PTRACE_READDATA, etc., to read and write memory in the NEW_SUN_PTRACE case. It ought to be straightforward. But it appears that writing did @@ -373,79 +325,14 @@ write_inferior_memory (memaddr, myaddr, len) return 0; } -void -try_writing_regs_command () -{ - register int i; - register int val; - - if (inferior_pid == 0) - error ("There is no inferior process now."); - - fetch_inferior_registers (0); - for (i = 0; i < 18; i++) - { - QUIT; - errno = 0; - val = read_register (i); - write_register (i, val); - if (errno == 0) - { - printf (" Succeeded with register %d; value 0x%x (%d).\n", - i, val, val); - } - else - printf (" Failed with register %d.\n", i); - } -} - void initialize () { - inferior_pid = 0; - - -} - - -/* Return the contents of register REGNO, - regarding it as an integer. */ - -CORE_ADDR -read_register (regno) - int regno; -{ - /* This loses when REGISTER_RAW_SIZE (regno) != sizeof (int) */ - return *(int *) ®isters[REGISTER_BYTE (regno)]; -} - -/* Store VALUE in the register number REGNO, regarded as an integer. */ - -void -write_register (regno, val) - int regno, val; -{ - /* This loses when REGISTER_RAW_SIZE (regno) != sizeof (int) */ - *(int *) ®isters[REGISTER_BYTE (regno)] = val; - - if (have_inferior_p ()) - store_inferior_registers (regno); } - int have_inferior_p () { return inferior_pid != 0; } - -print_some_registers (regs) - int regs[]; -{ - register int i; - for (i = 0; i < 18; i++) - { - printf ("reg[%d] = %x\n", i, regs[i]); - } -} diff --git a/gdb/gdbserver/remote-utils.c b/gdb/gdbserver/remote-utils.c index 2781ac5e35c..a16ba0aee17 100644 --- a/gdb/gdbserver/remote-utils.c +++ b/gdb/gdbserver/remote-utils.c @@ -25,10 +25,15 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include +#include +#include +#include +#include +#include +#include extern int remote_desc; extern int remote_debugging; -extern int kiodebug; void remote_open (); void remote_send (); @@ -53,13 +58,56 @@ remote_open (name, from_tty) remote_debugging = 0; - remote_desc = open (name, O_RDWR); - if (remote_desc < 0) - perror_with_name ("Could not open remote device"); + if (!strchr (name, ':')) + { + remote_desc = open (name, O_RDWR); + if (remote_desc < 0) + perror_with_name ("Could not open remote device"); + + ioctl (remote_desc, TIOCGETP, &sg); + sg.sg_flags = RAW; + ioctl (remote_desc, TIOCSETP, &sg); + } + else + { + char *port_str; + int port; + struct sockaddr_in sockaddr; + int tmp; + + port_str = strchr (name, ':'); + + port = atoi (port_str + 1); + + remote_desc = socket (PF_INET, SOCK_STREAM, 0); + if (remote_desc < 0) + perror_with_name ("Can't open socket"); + + /* Allow rapid reuse of this port. */ + tmp = 1; + setsockopt (remote_desc, SOL_SOCKET, SO_REUSEADDR, (char *)&tmp, + sizeof(tmp)); + + /* Enable TCP keep alive process. */ + tmp = 1; + setsockopt (remote_desc, SOL_SOCKET, SO_KEEPALIVE, (char *)&tmp, sizeof(tmp)); + + sockaddr.sin_family = PF_INET; + sockaddr.sin_port = htons(port); + sockaddr.sin_addr.s_addr = INADDR_ANY; - ioctl (remote_desc, TIOCGETP, &sg); - sg.sg_flags = RAW; - ioctl (remote_desc, TIOCSETP, &sg); + if (bind (remote_desc, &sockaddr, sizeof (sockaddr)) + || listen (remote_desc, 1)) + perror_with_name ("Can't bind address"); + + tmp = sizeof (sockaddr); + remote_desc = accept (remote_desc, &sockaddr, &tmp); + if (remote_desc == -1) + perror_with_name ("Accept failed"); + + tmp = 1; + setsockopt (remote_desc, 6, TCP_NODELAY, (char *)&tmp, sizeof(tmp)); + } fprintf (stderr, "Remote debugging using %s\n", name); remote_debugging = 1; @@ -148,9 +196,24 @@ putpkt (buf) static int readchar () { - char buf[1]; - while (read (remote_desc, buf, 1) != 1); - return buf[0] & 0x7f; + static char buf[BUFSIZ]; + static int bufcnt = 0; + static char *bufp; + + if (bufcnt-- > 0) + return *bufp++ & 0x7f; + + bufcnt = read (remote_desc, buf, sizeof (buf)); + + if (bufcnt <= 0) + { + perror ("readchar"); + fatal ("read error, quitting"); + } + + bufp = buf; + bufcnt--; + return *bufp++ & 0x7f; } /* Read a packet from the remote machine, with error checking, @@ -161,12 +224,13 @@ getpkt (buf) char *buf; { char *bp; - unsigned char csum, c, c1, c2; - extern kiodebug; + unsigned char csum, c1, c2; + int c; while (1) { csum = 0; + while ((c = readchar ()) != '$'); bp = buf; diff --git a/gdb/ser-go32.c b/gdb/ser-go32.c index 1d930a88480..c9770a93b46 100644 --- a/gdb/ser-go32.c +++ b/gdb/ser-go32.c @@ -21,6 +21,33 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "serial.h" #include +/* This is unused for now. We just return a placeholder. */ +struct go32_ttystate +{ + int bogus; +}; + +static int go32_open PARAMS ((serial_t scb, const char *name)); +static void go32_raw PARAMS ((serial_t scb)); +static int wait_for PARAMS ((serial_t scb, int timeout)); +static int go32_readchar PARAMS ((serial_t scb, int timeout)); +static int rate_to_code PARAMS ((int rate)); +static int go32_setbaudrate PARAMS ((serial_t scb, int rate)); +static int go32_write PARAMS ((serial_t scb, const char *str, int len)); +static void go32_restore PARAMS ((serial_t scb)); +static void go32_close PARAMS ((serial_t scb)); +serial_ttystate go32_get_tty_state PARAMS ((serial_t scb)); +static int go32_set_tty_state PARAMS ((serial_t scb, serial_ttystate state)); +static int strncasecmp PARAMS ((char *str1, char *str2, int len)); +static char *aptr PARAMS ((short p)); +static ASYNC_STRUCT *getivec PARAMS ((int which)); +static int dos_async_init PARAMS ((int port)); +static void dos_async_tx PARAMS ((const char c)); +static int dos_async_ready PARAMS (()); +static int dos_async_rx PARAMS (()); +static int dosasync_read PARAMS ((int fd, char *buf, int len, int timeout)); +static int dosasync_write PARAMS ((int fd, const char *buf, int len, int timeout)); + #define SIGNATURE 0x4154 #define VERSION 1 #define OFFSET 0x104 @@ -260,6 +287,30 @@ go32_readchar (scb, timeout) return SERIAL_TIMEOUT; } +/* go32_{get set}_tty_state() are both dummys to fill out the function + vector. Someday, they may do something real... */ + +static serial_ttystate +go32_get_tty_state(scb) + serial_t scb; +{ + struct go32_ttystate *state; + + state = (struct go32_ttystate *)xmalloc(sizeof *state); + + return (serial_ttystate)state; +} + +static int +go32_set_tty_state(scb, ttystate) + serial_t scb; + serial_ttystate ttystate; +{ + struct go32_ttystate *state; + + return 0; +} + static int go32_setbaudrate (scb, rate) serial_t scb; @@ -284,12 +335,6 @@ go32_close () { } -static void -go32_restore (scb) - serial_t scb; -{ -} - static struct serial_ops go32_ops = { "hardwire", @@ -299,7 +344,8 @@ static struct serial_ops go32_ops = go32_readchar, go32_write, go32_raw, - go32_restore, + go32_get_tty_state, + go32_set_tty_state, go32_setbaudrate }; diff --git a/gdb/ser-tcp.c b/gdb/ser-tcp.c new file mode 100644 index 00000000000..4f4fcdbc2c3 --- /dev/null +++ b/gdb/ser-tcp.c @@ -0,0 +1,270 @@ +/* Serial interface for raw TCP connections on Un*x like systems + Copyright 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#include "defs.h" +#include "serial.h" +#include +#include +#include +#include +#include +#include +#include +#include "signals.h" + +struct tcp_ttystate +{ + int bogus; +}; + +static int tcp_open PARAMS ((serial_t scb, const char *name)); +static void tcp_raw PARAMS ((serial_t scb)); +static int wait_for PARAMS ((serial_t scb, int timeout)); +static int tcp_readchar PARAMS ((serial_t scb, int timeout)); +static int tcp_setbaudrate PARAMS ((serial_t scb, int rate)); +static int tcp_write PARAMS ((serial_t scb, const char *str, int len)); +static void tcp_restore PARAMS ((serial_t scb)); +static void tcp_close PARAMS ((serial_t scb)); +static serial_ttystate tcp_get_tty_state PARAMS ((serial_t scb)); +static int tcp_set_tty_state PARAMS ((serial_t scb, serial_ttystate state)); + +/* Open up a raw tcp socket */ + +static int +tcp_open(scb, name) + serial_t scb; + const char *name; +{ + char *port_str; + int port; + struct hostent *hostent; + struct sockaddr_in sockaddr; + int tmp; + char hostname[100]; + + port_str = strchr (name, ':'); + + if (!port_str) + error ("tcp_open: No colon in host name!"); /* Shouldn't ever happen */ + + tmp = min(port_str - name + 1, sizeof hostname); + strncpy (hostname, name, tmp - 1); /* Don't want colon */ + port = atoi (port_str + 1); + + hostent = gethostbyname (hostname); + + if (!hostent) + { + errno = ENOENT; + return -1; + } + + scb->fd = socket (PF_INET, SOCK_STREAM, 0); + if (scb->fd < 0) + return -1; + + /* Allow rapid reuse of this port. */ + tmp = 1; + setsockopt (scb->fd, SOL_SOCKET, SO_REUSEADDR, (char *)&tmp, sizeof(tmp)); + + /* Enable TCP keep alive process. */ + tmp = 1; + setsockopt (scb->fd, SOL_SOCKET, SO_KEEPALIVE, (char *)&tmp, sizeof(tmp)); + + sockaddr.sin_family = PF_INET; + sockaddr.sin_port = htons(port); + memcpy (&sockaddr.sin_addr.s_addr, hostent->h_addr, + sizeof (struct in_addr)); + + if (connect(scb->fd, &sockaddr, sizeof(sockaddr))) + { + close(scb->fd); + return -1; + } + + tmp = 1; + if (setsockopt (scb->fd, 6, TCP_NODELAY, (char *)&tmp, sizeof(tmp))) + return -1; + + signal(SIGPIPE, SIG_IGN); /* If we don't do this, then GDB simply exits + when the remote side dies. */ + + return 0; +} + +static serial_ttystate +tcp_get_tty_state(scb) + serial_t scb; +{ + struct tcp_ttystate *state; + + state = (struct tcp_ttystate *)xmalloc(sizeof *state); + + return (serial_ttystate)state; +} + +static int +tcp_set_tty_state(scb, ttystate) + serial_t scb; + serial_ttystate ttystate; +{ + struct tcp_ttystate *state; + + state = (struct tcp_ttystate *)ttystate; + + return 0; +} + +static void +tcp_raw(scb) + serial_t scb; +{ + return; /* Always in raw mode */ +} + +/* Wait for input on scb, with timeout seconds. Returns 0 on success, + otherwise SERIAL_TIMEOUT or SERIAL_ERROR. + + For termio{s}, we actually just setup VTIME if necessary, and let the + timeout occur in the read() in tcp_read(). + */ + +static int +wait_for(scb, timeout) + serial_t scb; + int timeout; +{ + int numfds; + struct timeval tv; + fd_set readfds; + + FD_ZERO (&readfds); + + tv.tv_sec = timeout; + tv.tv_usec = 0; + + FD_SET(scb->fd, &readfds); + + if (timeout >= 0) + numfds = select(scb->fd+1, &readfds, 0, 0, &tv); + else + numfds = select(scb->fd+1, &readfds, 0, 0, 0); + + if (numfds <= 0) + if (numfds == 0) + return SERIAL_TIMEOUT; + else + return SERIAL_ERROR; /* Got an error from select or poll */ + + return 0; +} + +/* Read a character with user-specified timeout. TIMEOUT is number of seconds + to wait, or -1 to wait forever. Use timeout of 0 to effect a poll. Returns + char if successful. Returns -2 if timeout expired, EOF if line dropped + dead, or -3 for any other error (see errno in that case). */ + +static int +tcp_readchar(scb, timeout) + serial_t scb; + int timeout; +{ + int status; + + if (scb->bufcnt-- > 0) + return *scb->bufp++; + + status = wait_for(scb, timeout); + + if (status < 0) + return status; + + scb->bufcnt = read(scb->fd, scb->buf, BUFSIZ); + + if (scb->bufcnt <= 0) + if (scb->bufcnt == 0) + return SERIAL_TIMEOUT; /* 0 chars means timeout [may need to + distinguish between EOF & timeouts + someday] */ + else + return SERIAL_ERROR; /* Got an error from read */ + + scb->bufcnt--; + scb->bufp = scb->buf; + return *scb->bufp++; +} + +static int +tcp_setbaudrate(scb, rate) + serial_t scb; + int rate; +{ + return 0; /* Never fails! */ +} + +static int +tcp_write(scb, str, len) + serial_t scb; + const char *str; + int len; +{ + int cc; + + while (len > 0) + { + cc = write(scb->fd, str, len); + + if (cc < 0) + return 1; + len -= cc; + str += cc; + } + return 0; +} + +static void +tcp_close(scb) + serial_t scb; +{ + if (scb->fd < 0) + return; + + close(scb->fd); + scb->fd = -1; +} + +static struct serial_ops tcp_ops = +{ + "tcp", + 0, + tcp_open, + tcp_close, + tcp_readchar, + tcp_write, + tcp_raw, + tcp_get_tty_state, + tcp_set_tty_state, + tcp_setbaudrate, +}; + +void +_initialize_ser_tcp () +{ + serial_add_interface (&tcp_ops); +} diff --git a/gdb/ser-unix.c b/gdb/ser-unix.c index 5f1622dfa2e..6c142e75c82 100644 --- a/gdb/ser-unix.c +++ b/gdb/ser-unix.c @@ -30,12 +30,29 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifdef HAVE_TERMIOS #include #include + +struct hardwire_ttystate +{ + struct termios termios; +}; #endif + #ifdef HAVE_TERMIO #include + +struct hardwire_ttystate +{ + struct termio termio; +}; #endif + #ifdef HAVE_SGTTY #include + +struct hardwire_ttystate +{ + struct sgttyb sgttyb; +}; #endif static int hardwire_open PARAMS ((serial_t scb, const char *name)); @@ -47,6 +64,10 @@ static int hardwire_setbaudrate PARAMS ((serial_t scb, int rate)); static int hardwire_write PARAMS ((serial_t scb, const char *str, int len)); static void hardwire_restore PARAMS ((serial_t scb)); static void hardwire_close PARAMS ((serial_t scb)); +static int get_tty_state PARAMS ((serial_t scb, struct hardwire_ttystate *state)); +static int set_tty_state PARAMS ((serial_t scb, struct hardwire_ttystate *state)); +static serial_ttystate hardwire_get_tty_state PARAMS ((serial_t scb)); +static int hardwire_set_tty_state PARAMS ((serial_t scb, serial_ttystate state)); /* Open up a real live device for serial I/O */ @@ -62,68 +83,108 @@ hardwire_open(scb, name) return 0; } -static void -hardwire_raw(scb) +static int +get_tty_state(scb, state) serial_t scb; + struct hardwire_ttystate *state; { #ifdef HAVE_TERMIOS - struct termios termios; + return tcgetattr(scb->fd, &state->termios); +#endif - if (tcgetattr(scb->fd, &termios)) - { - fprintf(stderr, "tcgetattr failed: %s\n", safe_strerror(errno)); - } +#ifdef HAVE_TERMIO + return ioctl (scb->fd, TCGETA, &state->termio); +#endif - termios.c_iflag = 0; - termios.c_oflag = 0; - termios.c_lflag = 0; - termios.c_cflag &= ~(CSIZE|PARENB); - termios.c_cflag |= CS8; - termios.c_cc[VMIN] = 0; - termios.c_cc[VTIME] = 0; +#ifdef HAVE_SGTTY + return ioctl (scb->fd, TIOCGETP, &state->sgttyb); +#endif +} - if (tcsetattr(scb->fd, TCSANOW, &termios)) - { - fprintf(stderr, "tcsetattr failed: %s\n", safe_strerror(errno)); - } +static int +set_tty_state(scb, state) + serial_t scb; + struct hardwire_ttystate *state; +{ + int err; + +#ifdef HAVE_TERMIOS + return tcsetattr(scb->fd, TCSANOW, &state->termios); #endif #ifdef HAVE_TERMIO - struct termio termio; + return ioctl (scb->fd, TCSETA, &state->termio); +#endif - if (ioctl (scb->fd, TCGETA, &termio)) - { - fprintf(stderr, "TCGETA failed: %s\n", safe_strerror(errno)); - } +#ifdef HAVE_SGTTY + return ioctl (scb->fd, TIOCSETP, &state->sgttyb); +#endif +} - termio.c_iflag = 0; - termio.c_oflag = 0; - termio.c_lflag = 0; - termio.c_cflag &= ~(CSIZE|PARENB); - termio.c_cflag |= CS8; - termio.c_cc[VMIN] = 0; - termio.c_cc[VTIME] = 0; +static serial_ttystate +hardwire_get_tty_state(scb) + serial_t scb; +{ + struct hardwire_ttystate *state; - if (ioctl (scb->fd, TCSETA, &termio)) - { - fprintf(stderr, "TCSETA failed: %s\n", safe_strerror(errno)); - } -#endif + state = (struct hardwire_ttystate *)xmalloc(sizeof *state); -#ifdef HAVE_SGTTY - struct sgttyb sgttyb; + if (get_tty_state(scb, state)) + return NULL; - if (ioctl (scb->fd, TIOCGETP, &sgttyb)) - fprintf(stderr, "TIOCGETP failed: %s\n", safe_strerror(errno)); + return (serial_ttystate)state; +} - sgttyb.sg_flags |= RAW | ANYP; - sgttyb.sg_flags &= ~(CBREAK | ECHO); +static int +hardwire_set_tty_state(scb, ttystate) + serial_t scb; + serial_ttystate ttystate; +{ + struct hardwire_ttystate *state; - if (ioctl (scb->fd, TIOCSETP, &sgttyb)) - fprintf(stderr, "TIOCSETP failed: %s\n", safe_strerror(errno)); + state = (struct hardwire_ttystate *)ttystate; + + return set_tty_state(scb, state); +} + +static void +hardwire_raw(scb) + serial_t scb; +{ + struct hardwire_ttystate state; + + if (get_tty_state(scb, &state)) + fprintf(stderr, "get_tty_state failed: %s\n", safe_strerror(errno)); + +#ifdef HAVE_TERMIOS + state.termios.c_iflag = 0; + state.termios.c_oflag = 0; + state.termios.c_lflag = 0; + state.termios.c_cflag &= ~(CSIZE|PARENB); + state.termios.c_cflag |= CS8; + state.termios.c_cc[VMIN] = 0; + state.termios.c_cc[VTIME] = 0; +#endif + +#ifdef HAVE_TERMIO + state.termio.c_iflag = 0; + state.termio.c_oflag = 0; + state.termio.c_lflag = 0; + state.termio.c_cflag &= ~(CSIZE|PARENB); + state.termio.c_cflag |= CS8; + state.termio.c_cc[VMIN] = 0; + state.termio.c_cc[VTIME] = 0; +#endif + +#ifdef HAVE_SGTTY + state.sgttyb.sg_flags |= RAW | ANYP; + state.sgttyb.sg_flags &= ~(CBREAK | ECHO); #endif scb->current_timeout = 0; + + if (set_tty_state (scb, &state)) + fprintf(stderr, "set_tty_state failed: %s\n", safe_strerror(errno)); } /* Wait for input on scb, with timeout seconds. Returns 0 on success, @@ -171,31 +232,24 @@ wait_for(scb, timeout) return 0; { -#ifdef HAVE_TERMIOS - struct termios termios; - - if (tcgetattr(scb->fd, &termios)) - fprintf(stderr, "wait_for() tcgetattr failed: %s\n", safe_strerror(errno)); + struct hardwire_ttystate state; - termios.c_cc[VTIME] = timeout * 10; + if (get_tty_state(scb, &state)) + fprintf(stderr, "get_tty_state failed: %s\n", safe_strerror(errno)); - if (tcsetattr(scb->fd, TCSANOW, &termios)) - fprintf(stderr, "wait_for() tcsetattr failed: %s\n", safe_strerror(errno)); -#endif /* HAVE_TERMIOS */ +#ifdef HAVE_TERMIOS + state.termios.c_cc[VTIME] = timeout * 10; +#endif #ifdef HAVE_TERMIO - struct termio termio; - - if (ioctl (scb->fd, TCGETA, &termio)) - fprintf(stderr, "wait_for() TCGETA failed: %s\n", safe_strerror(errno)); + state.termio.c_cc[VTIME] = timeout * 10; +#endif - termio.c_cc[VTIME] = timeout * 10; + scb->current_timeout = timeout; - if (ioctl (scb->fd, TCSETA, &termio)) - fprintf(stderr, "TCSETA failed: %s\n", safe_strerror(errno)); -#endif /* HAVE_TERMIO */ + if (set_tty_state (scb, &state)) + fprintf(stderr, "set_tty_state failed: %s\n", safe_strerror(errno)); - scb->current_timeout = timeout; return 0; } #endif /* HAVE_TERMIO || HAVE_TERMIOS */ @@ -290,49 +344,31 @@ hardwire_setbaudrate(scb, rate) serial_t scb; int rate; { -#ifdef HAVE_TERMIOS - struct termios termios; + struct hardwire_ttystate state; - if (tcgetattr (scb->fd, &termios)) + if (get_tty_state(scb, &state)) return -1; - cfsetospeed (&termios, rate_to_code (rate)); - cfsetispeed (&termios, rate_to_code (rate)); - - if (tcsetattr (scb->fd, TCSANOW, &termios)) - return -1; +#ifdef HAVE_TERMIOS + cfsetospeed (&state.termios, rate_to_code (rate)); + cfsetispeed (&state.termios, rate_to_code (rate)); #endif #ifdef HAVE_TERMIO - struct termio termio; - - if (ioctl (scb->fd, TCGETA, &termio)) - return -1; - #ifndef CIBAUD #define CIBAUD CBAUD #endif - termio.c_cflag &= ~(CBAUD | CIBAUD); - termio.c_cflag |= rate_to_code (rate); - - if (ioctl (scb->fd, TCSETA, &termio)) - return -1; + state.termio.c_cflag &= ~(CBAUD | CIBAUD); + state.termio.c_cflag |= rate_to_code (rate); #endif #ifdef HAVE_SGTTY - struct sgttyb sgttyb; - - if (ioctl (scb->fd, TIOCGETP, &sgttyb)) - return -1; - - sgttyb.sg_ispeed = rate_to_code (rate); - sgttyb.sg_ospeed = rate_to_code (rate); - - if (ioctl (scb->fd, TIOCSETP, &sgttyb)) - return -1; + state.sgttyb.sg_ispeed = rate_to_code (rate); + state.sgttyb.sg_ospeed = rate_to_code (rate); #endif - return 0; + + return set_tty_state (scb, &state); } static int @@ -355,12 +391,6 @@ hardwire_write(scb, str, len) return 0; } -static void -hardwire_restore(scb) - serial_t scb; -{ -} - static void hardwire_close(scb) serial_t scb; @@ -381,8 +411,9 @@ static struct serial_ops hardwire_ops = hardwire_readchar, hardwire_write, hardwire_raw, - hardwire_restore, - hardwire_setbaudrate + hardwire_get_tty_state, + hardwire_set_tty_state, + hardwire_setbaudrate, }; void diff --git a/gdb/serial.c b/gdb/serial.c index e4c8cbf10b7..e5ccf1d18e1 100644 --- a/gdb/serial.c +++ b/gdb/serial.c @@ -20,10 +20,14 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "defs.h" #include "serial.h" -/* Open up a device or a network socket, depending upon the syntax of NAME. */ +/* Linked list of serial I/O handlers */ static struct serial_ops *serial_ops_list = NULL; +/* This is the last serial stream opened. Used by connect command. */ + +static serial_t last_serial_opened = NULL; + static struct serial_ops * serial_interface_lookup (name) char *name; @@ -45,6 +49,8 @@ serial_add_interface(optable) serial_ops_list = optable; } +/* Open up a device or a network socket, depending upon the syntax of NAME. */ + serial_t serial_open(name) const char *name; @@ -52,7 +58,10 @@ serial_open(name) serial_t scb; struct serial_ops *ops; - ops = serial_interface_lookup ("hardwire"); + if (strchr (name, ':')) + ops = serial_interface_lookup ("tcp"); + else + ops = serial_interface_lookup ("hardwire"); if (!ops) return NULL; @@ -70,6 +79,34 @@ serial_open(name) return NULL; } + last_serial_opened = scb; + + return scb; +} + +serial_t +serial_fdopen(fd) + const int fd; +{ + serial_t scb; + struct serial_ops *ops; + + ops = serial_interface_lookup ("hardwire"); + + if (!ops) + return NULL; + + scb = (serial_t)xmalloc (sizeof (struct _serial_t)); + + scb->ops = ops; + + scb->bufcnt = 0; + scb->bufp = scb->buf; + + scb->fd = fd; + + last_serial_opened = scb; + return scb; } @@ -77,21 +114,28 @@ void serial_close(scb) serial_t scb; { + last_serial_opened = NULL; + scb->ops->close(scb); free(scb); } #if 0 + /* Connect the user directly to the remote system. This command acts just like the 'cu' or 'tip' command. Use ~. or ~^D to break out. */ +static serial_t tty_desc; /* Controlling terminal */ + static void cleanup_tty(ttystate) - struct ttystate ttystate; + serial_ttystate ttystate; { - printf("\r\n[Exiting connect mode]\r\n"); - serial_restore(0, &ttystate); + printf ("\r\n[Exiting connect mode]\r\n"); + SERIAL_SET_TTY_STATE (tty_desc, ttystate); + free (ttystate); + SERIAL_CLOSE (tty_desc); } static void @@ -99,87 +143,94 @@ connect_command (args, fromtty) char *args; int fromtty; { - fd_set readfds; - int numfds; int c; char cur_esc = 0; - static struct ttystate ttystate; + serial_ttystate ttystate; + serial_t port_desc; /* TTY port */ dont_repeat(); - if (desc < 0) - error("target not open."); - if (args) - fprintf("This command takes no args. They have been ignored.\n"); + fprintf(stderr, "This command takes no args. They have been ignored.\n"); printf("[Entering connect mode. Use ~. or ~^D to escape]\n"); - serial_raw(0, &ttystate); + tty_desc = SERIAL_FDOPEN (0); + port_desc = last_serial_opened; - make_cleanup(cleanup_tty, &ttystate); + ttystate = SERIAL_GET_TTY_STATE (tty_desc); - FD_ZERO(&readfds); + SERIAL_RAW (tty_desc); + SERIAL_RAW (port_desc); + + make_cleanup (cleanup_tty, ttystate); while (1) { - do - { - FD_SET(0, &readfds); - FD_SET(desc, &readfds); - numfds = select(sizeof(readfds)*8, &readfds, 0, 0, 0); - } - while (numfds == 0); + int mask; - if (numfds < 0) - perror_with_name("select"); + mask = SERIAL_WAIT_2 (tty_desc, port_desc, -1); - if (FD_ISSET(0, &readfds)) - { /* tty input, send to stdebug */ + if (mask & 2) + { /* tty input */ char cx; - c = serial_readchar(-1); - if (c < 0) - perror_with_name("connect"); - - cx = c; - serial_write(&cx, 1); - switch (cur_esc) + while (1) { - case 0: - if (c == '\r') - cur_esc = c; - break; - case '\r': - if (c == '~') - cur_esc = c; - else - cur_esc = 0; - break; - case '~': - if (c == '.' || c == '\004') - return; - else - cur_esc = 0; + c = SERIAL_READCHAR(tty_desc, 0); + + if (c == SERIAL_TIMEOUT) + break; + + if (c < 0) + perror_with_name("connect"); + + cx = c; + SERIAL_WRITE(port_desc, &cx, 1); + + switch (cur_esc) + { + case 0: + if (c == '\r') + cur_esc = c; + break; + case '\r': + if (c == '~') + cur_esc = c; + else + cur_esc = 0; + break; + case '~': + if (c == '.' || c == '\004') + return; + else + cur_esc = 0; + } } } - if (FD_ISSET(desc, &readfds)) - { + if (mask & 1) + { /* Port input */ + char cx; + while (1) { - c = serial_readchar(-1); + c = SERIAL_READCHAR(port_desc, 0); + + if (c == SERIAL_TIMEOUT) + break; + if (c < 0) - break; - putchar(c); + perror_with_name("connect"); + + cx = c; + + SERIAL_WRITE(tty_desc, &cx, 1); } - fflush(stdout); } } } -#endif -#if 0 void _initialize_serial () { @@ -187,4 +238,4 @@ _initialize_serial () "Connect the terminal directly up to the command monitor.\n\ Use ~. or ~^D to break out."); } -#endif +#endif /* 0 */ diff --git a/gdb/serial.h b/gdb/serial.h index 9aa94250c97..f83fda7045f 100644 --- a/gdb/serial.h +++ b/gdb/serial.h @@ -19,13 +19,13 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Terminal state pointer. This is specific to each type of interface. */ -typedef PTR ttystate; +typedef PTR serial_ttystate; struct _serial_t { int fd; /* File descriptor */ struct serial_ops *ops; /* Function vector */ - ttystate ttystate; /* Not used (yet) */ + serial_ttystate ttystate; /* Not used (yet) */ int bufcnt; /* Amount of data in receive buffer */ unsigned char *bufp; /* Current byte */ unsigned char buf[BUFSIZ]; /* Da buffer itself */ @@ -42,7 +42,8 @@ struct serial_ops { int (*readchar) PARAMS ((serial_t, int timeout)); int (*write) PARAMS ((serial_t, const char *str, int len)); void (*go_raw) PARAMS ((serial_t)); - void (*restore) PARAMS ((serial_t)); + serial_ttystate (*get_tty_state) PARAMS ((serial_t)); + int (*set_tty_state) PARAMS ((serial_t, serial_ttystate)); int (*setbaudrate) PARAMS ((serial_t, int rate)); }; @@ -52,6 +53,8 @@ void serial_add_interface PARAMS ((struct serial_ops *optable)); serial_t serial_open PARAMS ((const char *name)); +serial_t serial_fdopen PARAMS ((int fd)); + /* For most routines, if a failure is indicated, then errno should be examined. */ @@ -60,10 +63,18 @@ serial_t serial_open PARAMS ((const char *name)); #define SERIAL_OPEN(NAME) serial_open(NAME) +/* Open a new serial stream using a file handle. */ + +#define SERIAL_FDOPEN(FD) serial_fdopen(FD) + /* Turn the port into raw mode. */ #define SERIAL_RAW(SERIAL_T) (SERIAL_T)->ops->go_raw((SERIAL_T)) +#define SERIAL_GET_TTY_STATE(SERIAL_T) (SERIAL_T)->ops->get_tty_state((SERIAL_T)) + +#define SERIAL_SET_TTY_STATE(SERIAL_T, TTYSTATE) (SERIAL_T)->ops->set_tty_state((SERIAL_T), (TTYSTATE)) + /* Read one char from the serial device with TIMEOUT seconds timeout. Returns char if ok, else one of the following codes. Note that all error codes are guaranteed to be < 0. */ @@ -90,7 +101,3 @@ void serial_close PARAMS ((serial_t)); #define SERIAL_CLOSE(SERIAL_T) serial_close(SERIAL_T) -/* Restore the serial port to the state saved in oldstate. XXX - currently - unused! */ - -#define SERIAL_RESTORE(SERIAL_T) (SERIAL_T)->ops->restore((SERIAL_T)) -- 2.30.2