From 3e722fb54b0d55afa5fd3d1b97189a06d41d6329 Mon Sep 17 00:00:00 2001 From: Chris Demetriou Date: Thu, 29 Apr 2004 05:14:22 +0000 Subject: [PATCH] [ bfd/ChangeLog ] 2004-04-28 Chris Demetriou * reloc.c: Remove BFD_RELOC_PCREL_HI16_S and BFD_RELOC_PCREL_LO16. * bfd-in2.h: Regenerate. * libbfd.h: Likewise. [ gas/ChangeLog ] 2004-04-28 Chris Demetriou * config/tc-mips.c (HAVE_32BIT_ADDRESSES, append_insn, macro_build) (load_address, macro, mips_ip, md_parse_option) (mips_force_relocation, mips_validate_fix, md_apply_fix3) (s_change_sec, pic_need_relax, tc_gen_reloc): Remove all embedded-PIC handling, and update comments. (SWITCH_TABLE): Remove. * config/tc-mips.h (DIFF_EXPR_OK): Delete. (enum mips_pic_level): Remove EMBEDDED_PIC. (EXTERN_FORCE_RELOC): Remove embedded-PIC handling. (TC_FORCE_RELOCATION): Update comment. * ecoff.c (ecoff_build_lineno): Add comment about some code that might be safe to remove now that MIPS embedded-PIC is gone. --- bfd/ChangeLog | 6 + bfd/bfd-in2.h | 6 - bfd/libbfd.h | 2 - bfd/reloc.c | 8 - gas/ChangeLog | 15 ++ gas/config/tc-mips.c | 416 ++++--------------------------------------- gas/config/tc-mips.h | 20 +-- gas/ecoff.c | 2 + 8 files changed, 61 insertions(+), 414 deletions(-) diff --git a/bfd/ChangeLog b/bfd/ChangeLog index 8fbe78e45be..7f26f184ba3 100644 --- a/bfd/ChangeLog +++ b/bfd/ChangeLog @@ -1,3 +1,9 @@ +2004-04-28 Chris Demetriou + + * reloc.c: Remove BFD_RELOC_PCREL_HI16_S and BFD_RELOC_PCREL_LO16. + * bfd-in2.h: Regenerate. + * libbfd.h: Likewise. + 2004-04-28 John David Anglin * som.c (struct som_misc_symbol_info): Add is_comdat, is_common and diff --git a/bfd/bfd-in2.h b/bfd/bfd-in2.h index 4f4c6704f64..d0e5cbe37ef 100644 --- a/bfd/bfd-in2.h +++ b/bfd/bfd-in2.h @@ -2289,12 +2289,6 @@ to compensate for the borrow when the low bits are added. */ /* Low 16 bits. */ BFD_RELOC_LO16, -/* Like BFD_RELOC_HI16_S, but PC relative. */ - BFD_RELOC_PCREL_HI16_S, - -/* Like BFD_RELOC_LO16, but PC relative. */ - BFD_RELOC_PCREL_LO16, - /* Relocation against a MIPS literal section. */ BFD_RELOC_MIPS_LITERAL, diff --git a/bfd/libbfd.h b/bfd/libbfd.h index 448b8b25ea6..2573de7bfbc 100644 --- a/bfd/libbfd.h +++ b/bfd/libbfd.h @@ -860,8 +860,6 @@ static const char *const bfd_reloc_code_real_names[] = { "@@uninitialized@@", "BFD_RELOC_HI16", "BFD_RELOC_HI16_S", "BFD_RELOC_LO16", - "BFD_RELOC_PCREL_HI16_S", - "BFD_RELOC_PCREL_LO16", "BFD_RELOC_MIPS_LITERAL", "BFD_RELOC_MIPS_GOT16", "BFD_RELOC_MIPS_CALL16", diff --git a/bfd/reloc.c b/bfd/reloc.c index 59fe848e978..bc8d13bd7ed 100644 --- a/bfd/reloc.c +++ b/bfd/reloc.c @@ -2066,14 +2066,6 @@ ENUM BFD_RELOC_LO16 ENUMDOC Low 16 bits. -ENUM - BFD_RELOC_PCREL_HI16_S -ENUMDOC - Like BFD_RELOC_HI16_S, but PC relative. -ENUM - BFD_RELOC_PCREL_LO16 -ENUMDOC - Like BFD_RELOC_LO16, but PC relative. ENUM BFD_RELOC_MIPS_LITERAL diff --git a/gas/ChangeLog b/gas/ChangeLog index 23eee168529..59c03363118 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,18 @@ +2004-04-28 Chris Demetriou + + * config/tc-mips.c (HAVE_32BIT_ADDRESSES, append_insn, macro_build) + (load_address, macro, mips_ip, md_parse_option) + (mips_force_relocation, mips_validate_fix, md_apply_fix3) + (s_change_sec, pic_need_relax, tc_gen_reloc): Remove all + embedded-PIC handling, and update comments. + (SWITCH_TABLE): Remove. + * config/tc-mips.h (DIFF_EXPR_OK): Delete. + (enum mips_pic_level): Remove EMBEDDED_PIC. + (EXTERN_FORCE_RELOC): Remove embedded-PIC handling. + (TC_FORCE_RELOCATION): Update comment. + * ecoff.c (ecoff_build_lineno): Add comment about some code that + might be safe to remove now that MIPS embedded-PIC is gone. + 2004-04-28 John David Anglin * config/obj-som.c (obj_som_init_stab_section): Add new arguments in diff --git a/gas/config/tc-mips.c b/gas/config/tc-mips.c index 83d02962445..6f0db0912ff 100644 --- a/gas/config/tc-mips.c +++ b/gas/config/tc-mips.c @@ -279,13 +279,11 @@ static int mips_32bitmode = 0; #define HAVE_64BIT_OBJECTS (mips_abi == N64_ABI) -/* We can only have 64bit addresses if the object file format - supports it. */ +/* We can only have 64bit addresses if the object file format supports it. */ #define HAVE_32BIT_ADDRESSES \ (HAVE_32BIT_GPRS \ - || ((bfd_arch_bits_per_address (stdoutput) == 32 \ - || ! HAVE_64BIT_OBJECTS) \ - && mips_pic != EMBEDDED_PIC)) + || (bfd_arch_bits_per_address (stdoutput) == 32 \ + || ! HAVE_64BIT_OBJECTS)) \ #define HAVE_64BIT_ADDRESSES (! HAVE_32BIT_ADDRESSES) @@ -2483,11 +2481,6 @@ append_insn (struct mips_cl_insn *ip, expressionS *address_expr, || (mips_opts.mips16 && (pinfo & MIPS16_INSN_WRITE_31) && insn_uses_reg (&prev_insn, RA, MIPS_GR_REG)) - /* If we are generating embedded PIC code, the branch - might be expanded into a sequence which uses $at, so - we can't swap with an instruction which reads it. */ - || (mips_pic == EMBEDDED_PIC - && insn_uses_reg (&prev_insn, AT, MIPS_GR_REG)) /* If the previous previous instruction has a load delay, and sets a register that the branch reads, we can not swap. */ @@ -3132,9 +3125,7 @@ macro_build (expressionS *ep, const char *name, const char *fmt, ...) || *r == BFD_RELOC_MIPS_GOT_PAGE || *r == BFD_RELOC_MIPS_GOT_OFST || *r == BFD_RELOC_MIPS_GOT_LO16 - || *r == BFD_RELOC_MIPS_CALL_LO16 - || (ep->X_op == O_subtract - && *r == BFD_RELOC_PCREL_LO16)); + || *r == BFD_RELOC_MIPS_CALL_LO16); continue; case 'u': @@ -3147,9 +3138,7 @@ macro_build (expressionS *ep, const char *name, const char *fmt, ...) || *r == BFD_RELOC_HI16 || *r == BFD_RELOC_GPREL16 || *r == BFD_RELOC_MIPS_GOT_HI16 - || *r == BFD_RELOC_MIPS_CALL_HI16)) - || (ep->X_op == O_subtract - && *r == BFD_RELOC_PCREL_HI16_S))); + || *r == BFD_RELOC_MIPS_CALL_HI16)))); continue; case 'p': @@ -4018,14 +4007,6 @@ load_address (int reg, expressionS *ep, int *used_at) } } } - else if (mips_pic == EMBEDDED_PIC) - { - /* We always do - addiu $reg,$gp, (BFD_RELOC_GPREL16) - */ - macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", - reg, mips_gp_register, BFD_RELOC_GPREL16); - } else abort (); } @@ -4884,50 +4865,6 @@ macro (struct mips_cl_insn *ip) used_at = 0; } - /* When generating embedded PIC code, we permit expressions of - the form - la $treg,foo-bar - la $treg,foo-bar($breg) - where bar is an address in the current section. These are used - when getting the addresses of functions. We don't permit - X_add_number to be non-zero, because if the symbol is - external the relaxing code needs to know that any addend is - purely the offset to X_op_symbol. */ - if (mips_pic == EMBEDDED_PIC - && offset_expr.X_op == O_subtract - && (symbol_constant_p (offset_expr.X_op_symbol) - ? S_GET_SEGMENT (offset_expr.X_op_symbol) == now_seg - : (symbol_equated_p (offset_expr.X_op_symbol) - && (S_GET_SEGMENT - (symbol_get_value_expression (offset_expr.X_op_symbol) - ->X_add_symbol) - == now_seg))) - && (offset_expr.X_add_number == 0 - || OUTPUT_FLAVOR == bfd_target_elf_flavour)) - { - if (breg == 0) - { - tempreg = treg; - used_at = 0; - macro_build (&offset_expr, "lui", "t,u", - tempreg, BFD_RELOC_PCREL_HI16_S); - } - else - { - macro_build (&offset_expr, "lui", "t,u", - tempreg, BFD_RELOC_PCREL_HI16_S); - macro_build (NULL, - (dbl || HAVE_64BIT_ADDRESSES) ? "daddu" : "addu", - "d,v,t", tempreg, tempreg, breg); - } - macro_build (&offset_expr, - (dbl || HAVE_64BIT_ADDRESSES) ? "daddiu" : "addiu", - "t,r,j", treg, tempreg, BFD_RELOC_PCREL_LO16); - if (! used_at) - return; - break; - } - if (offset_expr.X_op != O_symbol && offset_expr.X_op != O_constant) { @@ -4937,7 +4874,7 @@ macro (struct mips_cl_insn *ip) if (offset_expr.X_op == O_constant) load_register (tempreg, &offset_expr, - ((mips_pic == EMBEDDED_PIC || mips_pic == NO_PIC) + (mips_pic == NO_PIC ? (dbl || HAVE_64BIT_ADDRESSES) : HAVE_64BIT_ADDRESSES)); else if (mips_pic == NO_PIC) @@ -5477,14 +5414,6 @@ macro (struct mips_cl_insn *ip) } relax_end (); } - else if (mips_pic == EMBEDDED_PIC) - { - /* We use - addiu $tempreg,$gp, (BFD_RELOC_GPREL16) - */ - macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", tempreg, - mips_gp_register, BFD_RELOC_GPREL16); - } else abort (); @@ -5492,7 +5421,7 @@ macro (struct mips_cl_insn *ip) { char *s; - if (mips_pic == EMBEDDED_PIC || mips_pic == NO_PIC) + if (mips_pic == NO_PIC) s = (dbl || HAVE_64BIT_ADDRESSES) ? "daddu" : "addu"; else s = ADDRESS_ADD_INSN; @@ -5522,8 +5451,7 @@ macro (struct mips_cl_insn *ip) dreg = RA; /* Fall through. */ case M_JAL_2: - if (mips_pic == NO_PIC - || mips_pic == EMBEDDED_PIC) + if (mips_pic == NO_PIC) macro_build (NULL, "jalr", "d,s", dreg, sreg); else if (mips_pic == SVR4_PIC) { @@ -5694,13 +5622,6 @@ macro (struct mips_cl_insn *ip) } } } - else if (mips_pic == EMBEDDED_PIC) - { - macro_build (&offset_expr, "bal", "p"); - /* The linker may expand the call to a longer sequence which - uses $at, so we must break rather than return. */ - break; - } else abort (); @@ -5896,46 +5817,6 @@ macro (struct mips_cl_insn *ip) ^ 0x80000000) - 0x80000000); } - /* For embedded PIC, we allow loads where the offset is calculated - by subtracting a symbol in the current segment from an unknown - symbol, relative to a base register, e.g.: - $treg, -($breg) - This is used by the compiler for switch statements. */ - if (mips_pic == EMBEDDED_PIC - && offset_expr.X_op == O_subtract - && (symbol_constant_p (offset_expr.X_op_symbol) - ? S_GET_SEGMENT (offset_expr.X_op_symbol) == now_seg - : (symbol_equated_p (offset_expr.X_op_symbol) - && (S_GET_SEGMENT - (symbol_get_value_expression (offset_expr.X_op_symbol) - ->X_add_symbol) - == now_seg))) - && breg != 0 - && (offset_expr.X_add_number == 0 - || OUTPUT_FLAVOR == bfd_target_elf_flavour)) - { - /* For this case, we output the instructions: - lui $tempreg, (BFD_RELOC_PCREL_HI16_S) - addiu $tempreg,$tempreg,$breg - $treg,($tempreg) (BFD_RELOC_PCREL_LO16) - If the relocation would fit entirely in 16 bits, it would be - nice to emit: - $treg,($breg) (BFD_RELOC_PCREL_LO16) - instead, but that seems quite difficult. */ - macro_build (&offset_expr, "lui", "t,u", tempreg, - BFD_RELOC_PCREL_HI16_S); - macro_build (NULL, - ((bfd_arch_bits_per_address (stdoutput) == 32 - || ! ISA_HAS_64BIT_REGS (mips_opts.isa)) - ? "addu" : "daddu"), - "d,v,t", tempreg, tempreg, breg); - macro_build (&offset_expr, s, fmt, treg, - BFD_RELOC_PCREL_LO16, tempreg); - if (! used_at) - return; - break; - } - if (offset_expr.X_op != O_constant && offset_expr.X_op != O_symbol) { @@ -6261,29 +6142,6 @@ macro (struct mips_cl_insn *ip) BFD_RELOC_MIPS_GOT_OFST, tempreg); relax_end (); } - else if (mips_pic == EMBEDDED_PIC) - { - /* If there is no base register, we want - $treg,($gp) (BFD_RELOC_GPREL16) - If there is a base register, we want - addu $tempreg,$breg,$gp - $treg,($tempreg) (BFD_RELOC_GPREL16) - */ - assert (offset_expr.X_op == O_symbol); - if (breg == 0) - { - macro_build (&offset_expr, s, fmt, treg, BFD_RELOC_GPREL16, - mips_gp_register); - used_at = 0; - } - else - { - macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", - tempreg, breg, mips_gp_register); - macro_build (&offset_expr, s, fmt, treg, - BFD_RELOC_GPREL16, tempreg); - } - } else abort (); @@ -6371,15 +6229,6 @@ macro (struct mips_cl_insn *ip) macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", AT, BFD_RELOC_MIPS_GOT16, mips_gp_register); } - else if (mips_pic == EMBEDDED_PIC) - { - /* For embedded PIC we pick up the entire address off $gp in - a single instruction. */ - macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", AT, - mips_gp_register, BFD_RELOC_GPREL16); - offset_expr.X_op = O_constant; - offset_expr.X_add_number = 0; - } else abort (); @@ -6560,11 +6409,6 @@ macro (struct mips_cl_insn *ip) fmt = "t,o(b)"; ldd_std: - /* We do _not_ bother to allow embedded PIC (symbol-local_symbol) - loads for the case of doing a pair of loads to simulate an 'ld'. - This is not currently done by the compiler, and assembly coders - writing embedded-pic code can cope. */ - if (offset_expr.X_op != O_symbol && offset_expr.X_op != O_constant) { @@ -6788,37 +6632,6 @@ macro (struct mips_cl_insn *ip) mips_optimize = hold_mips_optimize; relax_end (); } - else if (mips_pic == EMBEDDED_PIC) - { - /* If there is no base register, we use - $treg,($gp) (BFD_RELOC_GPREL16) - $treg+1,+4($gp) (BFD_RELOC_GPREL16) - If we have a base register, we use - addu $at,$breg,$gp - $treg,($at) (BFD_RELOC_GPREL16) - $treg+1,+4($at) (BFD_RELOC_GPREL16) - */ - if (breg == 0) - { - tempreg = mips_gp_register; - used_at = 0; - } - else - { - macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", - AT, breg, mips_gp_register); - tempreg = AT; - used_at = 1; - } - - /* Itbl support may require additional care here. */ - macro_build (&offset_expr, s, fmt, coproc ? treg + 1 : treg, - BFD_RELOC_GPREL16, tempreg); - offset_expr.X_add_number += 4; - /* Itbl support may require additional care here. */ - macro_build (&offset_expr, s, fmt, coproc ? treg : treg + 1, - BFD_RELOC_GPREL16, tempreg); - } else abort (); @@ -8857,13 +8670,6 @@ do_msbd: The .lit4 and .lit8 sections are only used if permitted by the -G argument. - When generating embedded PIC code, we use the - .lit8 section but not the .lit4 section (we can do - .lit4 inline easily; we need to put .lit8 - somewhere in the data segment, and using .lit8 - permits the linker to eventually combine identical - .lit8 entries). - The code below needs to know whether the target register is 32 or 64 bits wide. It relies on the fact 'f' and 'F' are used with GPR-based instructions and 'l' and @@ -8889,8 +8695,7 @@ do_msbd: if (*args == 'f' || (*args == 'l' - && (mips_pic == EMBEDDED_PIC - || g_switch_value < 4 + && (g_switch_value < 4 || (temp[0] == 0 && temp[1] == 0) || (temp[2] == 0 && temp[3] == 0)))) { @@ -8977,15 +8782,11 @@ do_msbd: default: /* unused default case avoids warnings. */ case 'L': newname = RDATA_SECTION_NAME; - if ((g_switch_value >= 8) - || mips_pic == EMBEDDED_PIC) + if (g_switch_value >= 8) newname = ".lit8"; break; case 'F': - if (mips_pic == EMBEDDED_PIC) - newname = ".lit8"; - else - newname = RDATA_SECTION_NAME; + newname = RDATA_SECTION_NAME; break; case 'l': assert (g_switch_value >= 4); @@ -10535,9 +10336,9 @@ md_parse_option (int c, char *arg) #endif /* OBJ_ELF */ case 'G': - if (mips_pic == SVR4_PIC || mips_pic == EMBEDDED_PIC) + if (mips_pic == SVR4_PIC) { - as_bad (_("-G may not be used with SVR4 or embedded PIC code")); + as_bad (_("-G may not be used with SVR4 PIC code")); return 0; } else @@ -10938,24 +10739,7 @@ mips_frob_file (void) } } -/* When generating embedded PIC code we need to use a special - relocation to represent the difference of two symbols in the .text - section (switch tables use a difference of this sort). See - include/coff/mips.h for details. This macro checks whether this - fixup requires the special reloc. */ -#define SWITCH_TABLE(fixp) \ - ((fixp)->fx_r_type == BFD_RELOC_32 \ - && OUTPUT_FLAVOR != bfd_target_elf_flavour \ - && (fixp)->fx_addsy != NULL \ - && (fixp)->fx_subsy != NULL \ - && S_GET_SEGMENT ((fixp)->fx_addsy) == text_section \ - && S_GET_SEGMENT ((fixp)->fx_subsy) == text_section) - -/* When generating embedded PIC code we must keep all PC relative - relocations, in case the linker has to relax a call. We also need - to keep relocations for switch table entries. - - We may have combined relocations without symbols in the N32/N64 ABI. +/* We may have combined relocations without symbols in the N32/N64 ABI. We have to prevent gas from dropping them. */ int @@ -10971,11 +10755,7 @@ mips_force_relocation (fixS *fixp) || fixp->fx_r_type == BFD_RELOC_LO16)) return 1; - return (mips_pic == EMBEDDED_PIC - && (fixp->fx_pcrel - || SWITCH_TABLE (fixp) - || fixp->fx_r_type == BFD_RELOC_PCREL_HI16_S - || fixp->fx_r_type == BFD_RELOC_PCREL_LO16)); + return 0; } /* This hook is called before a fix is simplified. We don't really @@ -11015,9 +10795,8 @@ mips_validate_fix (struct fix *fixP, asection *seg) whole function). */ if (fixP->fx_r_type == BFD_RELOC_16_PCREL_S2 - && (((OUTPUT_FLAVOR == bfd_target_ecoff_flavour - || OUTPUT_FLAVOR == bfd_target_elf_flavour) - && mips_pic != EMBEDDED_PIC) + && ((OUTPUT_FLAVOR == bfd_target_ecoff_flavour + || OUTPUT_FLAVOR == bfd_target_elf_flavour) || bfd_reloc_type_lookup (stdoutput, BFD_RELOC_16_PCREL_S2) == NULL) && fixP->fx_addsy) { @@ -11082,7 +10861,8 @@ md_apply_fix3 (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED) buf = (bfd_byte *) (fixP->fx_frag->fr_literal + fixP->fx_where); /* We are not done if this is a composite relocation to set up gp. */ - if (fixP->fx_addsy == NULL && ! fixP->fx_pcrel + assert (! fixP->fx_pcrel); + if (fixP->fx_addsy == NULL && !(fixP->fx_r_type == BFD_RELOC_MIPS_SUB || (fixP->fx_r_type == BFD_RELOC_64 && (previous_fx_r_type == BFD_RELOC_GPREL32 @@ -11123,9 +10903,7 @@ md_apply_fix3 (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED) case BFD_RELOC_MIPS_CALL_HI16: case BFD_RELOC_MIPS_CALL_LO16: case BFD_RELOC_MIPS16_GPREL: - if (fixP->fx_pcrel) - as_bad_where (fixP->fx_file, fixP->fx_line, - _("Invalid PC relative reloc")); + assert (! fixP->fx_pcrel); /* Nothing needed to do. The value comes from the reloc entry */ break; @@ -11136,44 +10914,10 @@ md_apply_fix3 (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED) *valP = 0; break; - case BFD_RELOC_PCREL_HI16_S: - /* The addend for this is tricky if it is internal, so we just - do everything here rather than in bfd_install_relocation. */ - if (OUTPUT_FLAVOR == bfd_target_elf_flavour && !fixP->fx_done) - break; - if (fixP->fx_addsy - && (symbol_get_bfdsym (fixP->fx_addsy)->flags & BSF_SECTION_SYM) == 0) - { - /* For an external symbol adjust by the address to make it - pcrel_offset. We use the address of the RELLO reloc - which follows this one. */ - *valP += (fixP->fx_next->fx_frag->fr_address - + fixP->fx_next->fx_where); - } - *valP = ((*valP + 0x8000) >> 16) & 0xffff; - if (target_big_endian) - buf += 2; - md_number_to_chars (buf, *valP, 2); - break; - - case BFD_RELOC_PCREL_LO16: - /* The addend for this is tricky if it is internal, so we just - do everything here rather than in bfd_install_relocation. */ - if (OUTPUT_FLAVOR == bfd_target_elf_flavour && !fixP->fx_done) - break; - if (fixP->fx_addsy - && (symbol_get_bfdsym (fixP->fx_addsy)->flags & BSF_SECTION_SYM) == 0) - *valP += fixP->fx_frag->fr_address + fixP->fx_where; - if (target_big_endian) - buf += 2; - md_number_to_chars (buf, *valP, 2); - break; - case BFD_RELOC_64: /* This is handled like BFD_RELOC_32, but we output a sign extended value if we are only 32 bits. */ - if (fixP->fx_done - || (mips_pic == EMBEDDED_PIC && SWITCH_TABLE (fixP))) + if (fixP->fx_done) { if (8 <= sizeof (valueT)) md_number_to_chars (buf, *valP, 8); @@ -11197,11 +10941,8 @@ md_apply_fix3 (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED) case BFD_RELOC_32: /* If we are deleting this reloc entry, we must fill in the value now. This can happen if we have a .word which is not - resolved when it appears but is later defined. We also need - to fill in the value if this is an embedded PIC switch table - entry. */ - if (fixP->fx_done - || (mips_pic == EMBEDDED_PIC && SWITCH_TABLE (fixP))) + resolved when it appears but is later defined. */ + if (fixP->fx_done) md_number_to_chars (buf, *valP, 4); break; @@ -11214,6 +10955,8 @@ md_apply_fix3 (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED) break; case BFD_RELOC_LO16: + /* FIXME: Now that embedded-PIC is gone, some of this code/comment + may be safe to remove, but if so it's not obvious. */ /* When handling an embedded PIC switch statement, we can wind up deleting a LO16 reloc. See the 'o' case in mips_ip. */ if (fixP->fx_done) @@ -11484,13 +11227,6 @@ s_change_sec (int sec) { segT seg; - /* When generating embedded PIC code, we only use the .text, .lit8, - .sdata and .sbss sections. We change the .data and .rdata - pseudo-ops to use .sdata. */ - if (mips_pic == EMBEDDED_PIC - && (sec == 'd' || sec == 'r')) - sec = 's'; - #ifdef OBJ_ELF /* The ELF backend needs to know that we are changing sections, so that .previous works correctly. We could do something like check @@ -12634,9 +12370,7 @@ pic_need_relax (symbolS *sym, asection *segtype) #ifdef OBJ_ELF /* A global or weak symbol is treated as external. */ && (OUTPUT_FLAVOR != bfd_target_elf_flavour - || (! S_IS_WEAK (sym) - && (! S_IS_EXTERNAL (sym) - || mips_pic == EMBEDDED_PIC))) + || (! S_IS_WEAK (sym) && ! S_IS_EXTERNAL (sym))) #endif ); } @@ -12989,57 +12723,8 @@ tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, fixS *fixp) *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy); reloc->address = fixp->fx_frag->fr_address + fixp->fx_where; - if (mips_pic == EMBEDDED_PIC - && SWITCH_TABLE (fixp)) - { - /* For a switch table entry we use a special reloc. The addend - is actually the difference between the reloc address and the - subtrahend. */ - reloc->addend = reloc->address - S_GET_VALUE (fixp->fx_subsy); - if (OUTPUT_FLAVOR != bfd_target_ecoff_flavour) - as_fatal (_("Double check fx_r_type in tc-mips.c:tc_gen_reloc")); - fixp->fx_r_type = BFD_RELOC_GPREL32; - } - else if (fixp->fx_pcrel) - { - bfd_vma pcrel_address; - - /* Set PCREL_ADDRESS to this relocation's "PC". The PC for high - high-part relocs is the address of the low-part reloc. */ - if (fixp->fx_r_type == BFD_RELOC_PCREL_HI16_S) - { - assert (fixp->fx_next != NULL - && fixp->fx_next->fx_r_type == BFD_RELOC_PCREL_LO16); - pcrel_address = (fixp->fx_next->fx_where - + fixp->fx_next->fx_frag->fr_address); - } - else - pcrel_address = reloc->address; - - if (OUTPUT_FLAVOR == bfd_target_elf_flavour) - { - /* At this point, fx_addnumber is "symbol offset - pcrel_address". - Relocations want only the symbol offset. */ - reloc->addend = fixp->fx_addnumber + pcrel_address; - } - else if (fixp->fx_r_type == BFD_RELOC_PCREL_LO16 - || fixp->fx_r_type == BFD_RELOC_PCREL_HI16_S) - { - /* We use a special addend for an internal RELLO or RELHI reloc. */ - if (symbol_section_p (fixp->fx_addsy)) - reloc->addend = pcrel_address - S_GET_VALUE (fixp->fx_subsy); - else - reloc->addend = fixp->fx_addnumber + pcrel_address; - } - else - { - /* A gruesome hack which is a result of the gruesome gas reloc - handling. */ - reloc->addend = pcrel_address; - } - } - else - reloc->addend = fixp->fx_addnumber; + assert (! fixp->fx_pcrel); + reloc->addend = fixp->fx_addnumber; /* Since the old MIPS ELF ABI uses Rel instead of Rela, encode the vtable entry to be used in the relocation's section offset. */ @@ -13049,49 +12734,16 @@ tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, fixS *fixp) reloc->addend = 0; } - /* Since DIFF_EXPR_OK is defined in tc-mips.h, it is possible that - fixup_segment converted a non-PC relative reloc into a PC - relative reloc. In such a case, we need to convert the reloc - code. */ code = fixp->fx_r_type; - if (fixp->fx_pcrel) - { - switch (code) - { - case BFD_RELOC_8: - code = BFD_RELOC_8_PCREL; - break; - case BFD_RELOC_16: - code = BFD_RELOC_16_PCREL; - break; - case BFD_RELOC_32: - code = BFD_RELOC_32_PCREL; - break; - case BFD_RELOC_64: - code = BFD_RELOC_64_PCREL; - break; - case BFD_RELOC_8_PCREL: - case BFD_RELOC_16_PCREL: - case BFD_RELOC_32_PCREL: - case BFD_RELOC_64_PCREL: - case BFD_RELOC_16_PCREL_S2: - case BFD_RELOC_PCREL_HI16_S: - case BFD_RELOC_PCREL_LO16: - break; - default: - as_bad_where (fixp->fx_file, fixp->fx_line, - _("Cannot make %s relocation PC relative"), - bfd_get_reloc_code_name (code)); - } - } - /* To support a PC relative reloc when generating embedded PIC code - for ECOFF, we use a Cygnus extension. We check for that here to - make sure that we don't let such a reloc escape normally. */ + /* To support a PC relative reloc, we used a Cygnus extension. + We check for that here to make sure that we don't let such a + reloc escape normally. (FIXME: This was formerly used by + embedded-PIC support, but is now used by branch handling in + general. That probably should be fixed.) */ if ((OUTPUT_FLAVOR == bfd_target_ecoff_flavour || OUTPUT_FLAVOR == bfd_target_elf_flavour) - && code == BFD_RELOC_16_PCREL_S2 - && mips_pic != EMBEDDED_PIC) + && code == BFD_RELOC_16_PCREL_S2) reloc->howto = NULL; else reloc->howto = bfd_reloc_type_lookup (stdoutput, code); diff --git a/gas/config/tc-mips.h b/gas/config/tc-mips.h index 25ca51e4f9d..8d0106a7c1e 100644 --- a/gas/config/tc-mips.h +++ b/gas/config/tc-mips.h @@ -58,10 +58,6 @@ extern void mips_handle_align (struct frag *); #define MAX_MEM_FOR_RS_ALIGN_CODE (1 + 2) -/* We permit PC relative difference expressions when generating - embedded PIC code. */ -#define DIFF_EXPR_OK - /* Tell assembler that we have an itbl_mips.h header file to include. */ #define HAVE_ITBL_CPU @@ -79,12 +75,6 @@ enum mips_pic_level /* Generate PIC code as in the SVR4 MIPS ABI. */ SVR4_PIC, - - /* Generate PIC code without using a global offset table: the data - segment has a maximum size of 64K, all data references are off - the $gp register, and all text references are PC relative. This - is used on some embedded systems. */ - EMBEDDED_PIC }; extern enum mips_pic_level mips_pic; @@ -129,14 +119,12 @@ extern int mips_fix_adjustable (struct fix *); /* Values passed to md_apply_fix3 don't include symbol values. */ #define MD_APPLY_SYM_VALUE(FIX) 0 -/* Global syms must not be resolved, to support ELF shared libraries. - When generating embedded code, we don't have shared libs. */ +/* Global syms must not be resolved, to support ELF shared libraries. */ #define EXTERN_FORCE_RELOC \ - (OUTPUT_FLAVOR == bfd_target_elf_flavour \ - && mips_pic != EMBEDDED_PIC) + (OUTPUT_FLAVOR == bfd_target_elf_flavour) -/* When generating embedded PIC code we must keep PC relative - relocations. */ +/* When generating NEWABI code, we may need to have to keep combined + relocations which don't have symbols. */ #define TC_FORCE_RELOCATION(FIX) mips_force_relocation (FIX) extern int mips_force_relocation (struct fix *); diff --git a/gas/ecoff.c b/gas/ecoff.c index 1de823e24df..d8ad019a72c 100644 --- a/gas/ecoff.c +++ b/gas/ecoff.c @@ -3685,6 +3685,8 @@ ecoff_build_lineno (const struct ecoff_debug_swap *backend, iline = 0; totcount = 0; + /* FIXME? Now that MIPS embedded-PIC is gone, it may be safe to + remove this code. */ /* For some reason the address of the first procedure is ignored when reading line numbers. This doesn't matter if the address of the first procedure is 0, but when gcc is generating MIPS -- 2.30.2