From 3fe41381a6b8095f3afcc15127e9da09aa0d1f63 Mon Sep 17 00:00:00 2001 From: Stan Shebs Date: Thu, 3 Sep 1998 21:54:38 +0000 Subject: [PATCH] Killed the clone --- gdb/ChangeLog | 2593 ------------------------------------------------- 1 file changed, 2593 deletions(-) diff --git a/gdb/ChangeLog b/gdb/ChangeLog index b0fe0befbbe..d41c4461137 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -10,2599 +10,6 @@ Tue Sep 1 12:04:57 EDT 1998 Zdenek Radouch (radouch@cygnus.com) * config/arm/tm-arm.h: new macros for distinguishing arm/thumb * config/mips/tm-mips.h: use ELF specific macro -Tue Aug 25 13:21:58 1998 Michael Snyder - - * ax-gdb.c (gen_var_ref): Allow for typedef types. - (gen_cast, gen_bitfield_ref, gen_expr, gen_deref): ditto. - -Mon Aug 24 18:29:03 1998 Michael Snyder - - * tracepoint.c (collect_symbol): Handle register doubles that - are stored in two registers. - -Mon Aug 24 14:39:08 1998 Mark Alexander - - * sh-stub.c (undoSStep): Improve comment. - * sparc-tdep.c (sparc_extract_struct_value_address): Simplify to use - same method on both 32-bit and 64-bit machines. - * sparcl-tdep.c (sparclite_check_watch_resources): Simulator doesn't - support hardware breakpoints. - * config/sparc/tm-sparc.h (CALL_DUMMY): Improve comments. - -1998-08-20 Jason Molenda (jsm@bugshack.cygnus.com) - - * rdi-share/Makefile.am (INCLUDES): Fix typeo. - * rdi-share/Makefile.in: Regenerated. - -1998-08-19 Jason Molenda (jsm@bugshack.cygnus.com) - - * rdi-share/Makefile.am: Use just `INCLUDES' not `libname_INCLUDES'. - * rdi-share/Makefile.in: Regenerated. - -1998-08-19 Keith Seitz - - * v850ice.c (v850ice_stop): New function to stop the ICE. - (v850ice_load) Pass filename to ICE DLL. - (ice_stepi, ice_nexti, ice_cont): Do not directly call the gdb - commands -- let the GUI do it so that it can retain control - of the display. - -Wed Aug 19 15:53:52 1998 Anthony Green - - * i386v4-nat.c: Include sys/reg.h if present. - -Wed Aug 19 03:07:53 1998 Richard Henderson - - * config/alpha/alpha-linux (XDEPFILES): Build ser-tcp. - -1998-08-18 Fernando Nasser - - * symtab.c (decode_line_1): For minimal symbol, SKIP_PROLOG to - make sure we stop after the frame pointer is locaded and backtrace - prints an accurate stack. Complements changes made on Mon Jul 27 - 10:45:56 1998 - (decode_line_2): Replaced the whitespace after ">" in a prompt - which has been taken away by changes made on Sun Jul 19 02:11:45 - 1998 - -1998-08-18 Keith Seitz - - * stack.c: Define new hook, selected_frame_level_changed_hook, which - will be called whenever the selected stack level changes. - (select_frame): Call the selected_frame_level_changed_hook. - -Tue Aug 18 18:03:42 1998 Stan Shebs - - * remote-rdi.c (arm_rdi_open): Pass serial device name to - Adp_OpenDevice, and include it in error reports. - -1998-08-18 Jason Molenda (jsm@bugshack.cygnus.com) - - * configure.in: Add more header files to AC_CHECK_HEADERS. - * configure: Regenerated. - - * command.c: Include wait.h or sys/wait.h if present. - * inftarg.c: Ditto. - * core-aout.c: Include ptrace.h or sys/ptrace.h if present, based - on autoconf test. - * infptrace.c: Ditto. - - * expprint.c: Include ctype.h for isprint prototype. - * i386aix-nat.c: Include sys/reg.h if autoconf says it is present. - * i386v-nat.c: Include ptrace.h, sys/ptrace.h, and sys/reg.h if - present, based on autoconf test. - - * utils.c: Include curses.h and term.h if present. - (puts_debug): Change 'carriage_return' local variable to return_p - to avoid name clash. - - * config/m68k/nm-apollo68b.h: Don't define PTRACE_IN_WRONG_PLACE, - determine it with autoconf. - * config/i386/nm-linux.h: Don't define NO_SYS_REG_H, determine it - with autoconf. - * config/i386/nm-i386sco.h: Don't define NO_PTRACE_H, determine it - with autoconf. - * config/i386/nm-i386v.h: Ditto. - * config/i386/nm-symmetry.h: Ditto. - * config/m88k/xm-cxux.h: Ditto. - * config/m88k/xm-dgux.h: Ditto. - - * config/m68k/delta68.mh (NAT_FILE): nm-delta68.h no longer necessary. - * config/m68k/nm-delta68.h: Removed. - -Fri Aug 14 11:14:03 1998 Jeffrey A Law (law@cygnus.com) - - * mn10300-tdep.c (set_movm_offsets): Change second argument to - be the actual args to movm itself. All callers changed. Only set - fi->fsr.regs[x] if reg X is saved by the movm instruction. - -Fri Aug 14 04:18:23 1998 Peter Schauer - - * sol-thread.c (lwp_to_thread): Fix error message for failing - td_ta_map_lwp2thr call. - (ps_lgetLDT): Mask off upper bits in GS register when comparing - with selector. - -Wed Aug 12 16:30:01 1998 Frank Ch. Eigler - - * remote-sim.c (simulator_command): Reset register cache after - simulator command. - -Wed Aug 12 09:00:26 1998 Stu Grossman - - * expprint.c (dump_prefix/postfix_expression): Don't try to print type - expressions. - -Tue Aug 11 11:33:25 1998 Stu Grossman - - * c-typeprint.c (c_print_type): Don't crash if varstring is null. - * expprint.c expression.h (dump_expression): Rename to - dump_prefix_expression. - * Print out the expression in normal form. Call print_longest - instead of trying to do it ourselves. - * (dump_postfix_expression): New function, prints out the expression - with indentation and better formatting and interpretation. - * parse.c (parse_exp_1): Put calls to dump expressions under ifdef - MAINTENANCE_CMDS and expressiondebug variable. - -Thu Aug 6 13:20:02 1998 Ron Unrau - - * infrun.c (wait_for_inferior): use stop_func_name instead of - stop_func_start to decide that no debug info exists. - -start-sanitize-sky -Thu Aug 6 13:15:05 1998 Ron Unrau - - * txvu-tdep.c: add VU0/1 control registers - * config/mips/tm-txvu.h: ditto - -Tue Aug 4 11:02:50 1998 Ron Unrau - - * txvu-tdep.c (txvu_insert_breakpoint): make sure CPU context is - set to correct VU memory space. - (txvu_remove_breakpoint): use this instead of txvu_breakpoint_from_pc - * config/tm-txvu.h: use new track-table address - Do note define BREAKPOINT_FROM_PC anymore - -Fri Jul 31 16:06:05 1998 Ron Unrau - - * config/tm-txvu.h: use NUM_CORE_REGS instead of NUM_R5900_REGS - * mips-tdep.c: use NUM_CORE_REGS - * txvu-tdep.c: use NUM_CORE_REGS, add function prototypes - (txvu_insert_breakpoints): use VIF interrupt bit - -end-sanitize-sky -Thu Jul 30 13:53:50 1998 Mark Alexander - - * mips-tdep.c (mask_address_p): New variable. - (mips_addr_bits_remove): Test mask_address_p to decide whether - to mask off the upper 32 bits of addresses. - (_initialize_mips_tdep): Add command to set mask_address_p. - (mips_call_dummy_address): New function. - * config/mips/tm-mips.h (CALL_DUMMY_ADDRESS): Redefine to - call mips_call_dummy_address. - -1998-07-29 Fernando Nasser - - * symfile.c (add_symbol_file_command): Test for the from_tty - parameter and avoid query when not interactive. - -start-sanitize-am33 -Wed Jul 29 10:39:29 1998 Jeffrey A Law (law@cygnus.com) - - * mn10300-tdep.c (set_movm_offsets): Do nothing for the am33 - registers if we are not in am33 mode. - (mn10300_frame_chain, mn10300_frame_saved_pc): Similarly. - (set_machine_hook): Keep track of whether or not we're in am33 mode. - -end-sanitize-am33 -Mon Jul 27 16:11:42 1998 Michael Snyder - - * tracepoint.c (remote_set_transparent_ranges): new function. - Send the start and end addresses of all loadable read-only - sections down to the trace target, so that it can treat them - as "transparent" (ie. don't care if they were collected or not). - -Mon Jul 27 15:38:07 1998 Mark Alexander - - * mn10300-tdep.c (mn10300_analyze_prologue): Undo previous fix - for setting frame address in optimized code; made unnecessary - by compiler fixes. - -Mon Jul 27 10:45:56 1998 Martin M. Hunt - - * symtab.c (decode_line_1): For minimal symbol, call - find_pc_sect_line() to make sure the line number gets set - properly. - (print_symbol_info): Redeclare function void. - -1998-07-27 Jason Molenda (jsm@bugshack.cygnus.com) - - * config/d10v/tm-d10v.h (REGISTER_NAMES): sp -> r15. The - stack pointer et al are synthesized from the SP_REGNUM (etc) - defines and should not be mentioned in REGISTER_NAMES. - -start-sanitize-am33 -Mon Jul 27 08:54:41 1998 Jeffrey A Law (law@cygnus.com) - - * mn10300-tdep.c (mn10300_frame_chain): Account for space saved - by am33 register saves. - (mn10300_frame_saved_pc): Similarly. - -end-sanitize-am33 -Fri Jul 24 14:41:19 1998 Michael Snyder - - * tracepoint.c (encode_actions): Treat register names and simple - variable names as special cases and don't convert them to byte- - codes: these things can be collected far more efficiently - without invoking the bytecode interpreter. - -Fri Jul 24 13:32:46 1998 Mark Alexander - - * config/i386/tm-i386.h (STORE_STRUCT_RETURN): Make it - work on hosts of any endianness. - * config/i386/tm-i386v.h: Ditto. - -Fri Jul 24 07:41:12 1998 Mark Alexander - - * mn10300-tdep.c (set_movm_offsets): New helper function - for mn10300_analyze_prologue. - (mn10300_analyze_prologue): Simplify by factoring out common code. - Fix bugs in setting frame address for optimized code. - Use read_memory_nobpt instead of target_read_memory. - -Thu Jul 23 17:01:17 1998 Michael Snyder - - * tracepoint.c (collect_symbol): handle LOC_ARG case. - -Thu Jul 23 15:07:40 1998 Dawn Perchik - - * sparc-tdep.c (sparc_init_extra_frame_info): Recognize when we're - in a function prologue before the SAVE instruction. - (sparc_frame_saved_pc): Ditto. - * config/sparc/tm-sparc.h (EXTRA_FRAME_INFO): Add in_prologue flag. - -Thu Jul 23 14:58:09 1998 Dawn Perchik - - * i386-tdep.c (i386_get_frame_setup): Recognize function - prologues in code compiled with -fcheck-stack. - -Thu Jul 23 14:49:27 1998 Dawn Perchik - - * remote-mips.c (remote_mips_insert_hw_breakpoint, - remote_mips_remove_hw_breakpoint): New functions for hardware - breakpoints on LSI targets. - * config/mips/tm-embed.h (target_remove_hw_breakpoint, - target_insert_hw_breakpoint): Define to call - remote_mips_insert_hw_breakpoint and remote_mips_remove_hw_breakpoint, - respectively. - -start-sanitize-sky -Thu Jul 23 13:00:28 1998 Ian Carmichael - - * txvu-tdep.c: (VU0_MEM0_WINDOW_START, VU1_MEM0_WINDOW_START) - Changed to use addresses in kseg1 range. - -end-sanitize-sky -1998-07-21 Fernando Nasser - - * source.c (print_source_lines): Print "No such file or directory" - just once. - (directory_command): same as above; resets if user issues dir. - -Sun Jul 19 02:11:45 1998 Martin M. Hunt - - * symtab.c (decode_line_2): Instead of printing a prompt - and calling command_line_input() without a prompt, just - call it with the proper args. This makes the GUI work too. - -Fri Jul 17 9:26:50 1998 Ron Unrau - - * blockframe.c (find_pc_sect_partial_function): allow for the possi- - bility of multiple symbols at the same address when finding high. - * breakpoint.c (resolve_sal_pc): if the function based section lookup - fails, try getting the section from the minimal symbol table. - * parse.c (write_exp_msymbol): use symbol_overlayed_address to get - the LMA of a minimal symbol if unmapped. - * symtab.c (find_line_symtab): change interface to return symtab - containing the best linetable found. - (decode_line_1): use find_line_symtab to set val.symtab. This should - improve support for source files with multiple symtabs. -start-sanitize-sky - * tm-txvu.h: include tm-mips64.h instead of starting from scratch. -end-sanitize-sky - -Wed Jul 15 11:51:33 1998 Keith Seitz - - * main.c (main): Fix violations of GNU coding standard. - - * breakpoint.c: Export delete_command. - - * infcmd.c: Export continue_command, stepi_command, and nexti_command. - - * Makefile.in: Add target for v850ice.o. - - * configure.tgt: Add cygwin32 dependencies for v850 ice. - -Wed Jul 15 10:58:29 1998 Nick Clifton - - * tracepoint.c (set_raw_tracepoint): Cope with symbols that do not - have an associated directory. - -Mon Jul 13 15:21:04 1998 Mark Alexander - - * utils.c (puts_debug): Display non-printable characters in hex - instead of octal. - -Thu Jul 9 16:16:47 1998 Jeffrey A Law (law@cygnus.com) - - * mn10300-tdep.c (mn10300_generic_register_names): New variable. - (set_machine_hook): New function. Copy the appropriate register - names into reg_names. - (_initialize_mn10300_tdep): Set up to call set_machine_hook. - * tm-mn10300 (NUM_REGS): Bump to 32. - (REGISTER_NAMES): Updated accordingly. - -start-sanitize-am33 - * mn10300-tdep.c (am33_register_names): New variable. - (mn10300_analyze_prologue): Handle regs saved by am33 prologues. - * tm-mn10300.h (E0_REGNUM): Define. -end-sanitize-am33 - -Tue Jul 7 7:40:13 1998 Ron Unrau - - * symtab.c (find_pc_sect_psymbol): allow case where textlow is 0 - -Thu Jul 2 15:57:58 1998 Frank Ch. Eigler - - * breakpoint.c (resolve_sal_pc): Accept absence of innermost - Lexical block for breakpoint resolution. - -Thu Jul 2 10:22:00 1998 Dawn Perchik - - * mdebugread.c (parse_partial_symbols): Go ahead and read the .mdebug - section, but just don't add a 2nd minimal symbol if this is an .mdebug - section in an ELF file. - -1998-07-01 Jim Blandy - - * Makefile.in (ax-general.o): Depend on $(defs_h) too. - (ax_h): Bother to define this. - -Mon Jun 29 19:01:18 1998 Jim Wilson - - * gnu-regex.c (re_comp): Add cast to char * before gettext calls. - -Sun Jun 28 11:35:48 1998 Peter Schauer - - Improve support for SunPro F77. - * dbxread.c (end_psymtab, process_one_symbol): Handle minimal - symbols with trailing underscore names. - * minsyms.c (find_stab_function_addr): Ditto. - * dbxread.c (process_one_symbol): Ignore N_ALIAS for now. - * partial-stab.h (case N_ALIAS): Ditto. - * stabsread.c (read_sun_builtin_type): Handle boolean types. - -Fri Jun 26 14:03:01 1998 Keith Seitz - - * symtab.h (enum namespace): Add new namespaces FUNCTIONS_NAMESPACE, - TYPES_NAMESPACE, METHODS_NAMESPACE, and VARIABLES_NAMESPACE used by - new search_symbols. - Add prototype for search_symbols and free_search_symbols. - - * symtab.c (list_symbols): Rewrite to use new search_symbols. - (file_matches): New helper function for search_symbols. - (free_search_symbols): New function which frees data returned from - search_symbols. - (print_symbol_info): New helper function which prints info about a - matched symbol to stdout. Extracted from old list_symbols. - (print_msymbol_info): New helper function which prints info about - a matched msymbol to stdout. Extracted from old list_symbols. - (symtab_symbol_info): Extracted from old list_symbols. - (variables_info): Use symtab_symbol_info. - (functions_info): Use symtab_symbol_info. - (types_info): Use symtab_symbol_info. - (rbreak_command): Rewrite to use new search_symbols. - -Thu Jun 25 22:38:32 1998 Frank Ch. Eigler - - * mips-tdep.c (mips_push_arguments): Use 128-bit stack frame - alignment for inferior calls. - -Wed Jun 24 23:17:12 1998 Mark Alexander - - * mn10200-tdep.c (mn10200_analyze_prologue): Fix calculation - of jsr target address. - -Tue Jun 23 19:37:46 1998 Mark Alexander - - * config/mn10200/tm-mn10200.h (SAVED_PC_AFTER_CALL): Don't - zero upper byte of address. - -Tue Jun 23 17:32:26 1998 Michael Snyder - - * rs6000-tdep.c (pop_dummy_frame): use memcpy. - (push_arguments): use memset. - (various other places): fix up indentation and long lines. - -Tue Jun 23 11:58:35 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * configure.in: s/lXext/-lXext/ for Jillian's change. - -Tue Jun 23 11:14:04 1998 Michael Snyder - - * source.c (find_source_lines): fix indentation. - - * config/mips/tm-irix5.h: Modify to work better on irix 6, by - making FP registers 8 bytes instead of 4. - REGISTER_BYTES: redefine. REGISTER_BYTE(): redefine. - REGISTER_VIRTUAL_TYPE: redefine. MIPS_LAST_ARG_REGNUM: redefine. - * irix5-nat.c (fetch_core_registers): read 8 bytes per FP register. - * mips-tdep.c (FP_REGISTER_DOUBLE): new macro to distinguish - targets with 8-byte FP registers (don't use TARGET_MIPS64). - (STACK_ARGSIZE): new macro, how much space is taken up on the - stack for each function argument (don't use TARGET_MIPS64). - (mips_push_arguments): modify logic to work better on Irix 6 - (n32 ABI). - -Tue Jun 23 12:29:53 1998 Jillian Ye - - * configure.in: Add -lXext to mips_extra_libs - * configure: Regenerated. - -Sun Jun 21 09:31:12 1998 Ron Unrau (runrau@cygnus.com) - - * symtab.c (find_line_pc): assumed that a PC of 0 is illegal. - Changed to pass PC as arg and return 1 if valid (0 otherwise). - symtab.h: change prototype to match - symtab.c (find_line_pc_range): use new interface - breakpoint.c (resolve_sal_pc): ditto - gdbtk.c (gdb_set_bp): ditto - -Wed Jun 17 15:50:00 1998 Ron Unrau (runrau@cygnus.com) - - * parse.c (target_map_name_to_register): Check target specific - aliases *first* so that it can over-ride architectural names - -Wed Jun 17 17:13:38 1998 Said Ziouani (saidz@park-street.cygnus.com) - - * remote-sds.c (sds_start_remote): Fix printf call. - -Tue Jun 16 16:32:08 1998 Mark Alexander - - * mn10200-tdep.c (mn10200_analyze_prologue): Fix null pointer - crash when in "start". - -Tue Jun 16 14:38:40 1998 Ron Unrau (runrau@cygnus.com) - - * dbxread.c: reset function_start_offset after a finishing N_FUN - is seen. - * remote-sim.c: allow TARGET_REDEFINE_DEFAULT_OPS to override - target vectors as needed. - -Sun Jun 14 08:46:25 1998 Ron Unrau (runrau@cygnus.com) - - * partial-stab.h: 'F' and 'f' type N_FUN psymbols should pass - CUR_SYMBOL_VALUE as CORE_ADDR instead of long - * buildsym.[ch]: export pending_blocks list - -Sat Jun 13 13:02:32 1998 Dawn Perchik (dawn@cygnus.com) - - * remote.c : Fix remote help string to match that of help.exp. - -Fri Jun 12 14:22:55 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * configure.in (LIBS): Add -lw to the list of libraries if needed. - -Thu Jun 11 15:05:10 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * btowc.c: Removed. - * configure.in: Don't see if we need to replace btowc(). - * Makefile.in: Don't include LIBOBJS. - * configure: Regenerated. - * gnu-regex.c (regex_compile): Only support i18n [:foo:] if - we have btowc(). - -Wed Jun 10 15:39:14 1998 Stu Grossman - - * c-exp.y: Fix problems with parsing "'foo.bar'::func". Some languages - allow symbols with dots. - - * gdbtypes.c (check_stub_method): Cosmetic. Use more descriptive - names for parameters. - -start-sanitize-java - * jv-exp.y: Parser now accepts primitive types. - * (parse_number): Use correct ifdef for scanf long double support. - * jv-lang.c (java_array_type): Initial cut at array support. - -end-sanitize-java - * language.c language.h (set_language): Now returns previous language. - - * symtab.c (find_methods): Make static. Cosmetic changes, including - indentation, and adding descriptive comments. Move local variable defs - into the block they are used in. - * Don't call check_stub_method any more. Use gdb_mangle_name to - generate the full method name. find_method doesn't need all the other - goobldegook that check_stub_method does. - * (gdb_mangle_name): Use more descriptive names for parameters. Fix - comment. -start-sanitize-java - * (lookup_partial_symbol lookup_block_symbol): Check for java to - ensure we can find mangled names. -end-sanitize-java - * (decode_line_1): Move local variable defs into the block they are - used in. (Improves code readability.) - -Wed Jun 10 18:04:35 1998 Frank Ch. Eigler - - * gdbtypes.c (get_discrete_bounds): Assign unsigned type flag for - all-positive enum. - (create_set_type): Ditto for all-positive set values. - * values.c (unpack_field_as_long): Check for typedef in struct - field unpacking. - -Wed Jun 10 14:06:05 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * configure.in: Add some tests for gnu-regex.c's benefit. - See if btowc() function is provided in C library. - * configure, config.in: Regenerated. - * Makefile.in (CLIBS, CDEPS): Add @LIBOBJS@ to build btowc.c - if necessary. - * btowc.c: New file. - - * gnu-regex.c: Reorder wchar.h and wctype.h includes for Solaris' - benefit. - Drop namespace preserving defines for now. - -Wed Jun 10 11:53:42 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * gnu-regex.c: Include "gnu-regex.h", not "regex.h". - -Wed Jun 10 11:34:07 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * gnu-regex.c, gnu-regex.h: Change LGPL license to GPL license - to stay consistent with the rest of GDB. - -Wed Jun 10 11:27:39 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * gnu-regex.c, gnu-regex.h: Update to current FSF (glibc) versions. - -Wed Jun 10 10:58:18 1998 Michael Snyder - - * printcmd.c (disassemble_command): move overlay mapping code - "up" into find_pc_partial_function. - * blockframe.c (find_pc_partial_function): adjust start address - and end address for overlays (mapped vs. unmapped addresses), - so that all callers of this function may benefit. - * m32r-tdep.c (m32r_skip_prologue): adjust indentation. - -Mon Jun 8 16:08:10 1998 Ron Unrau - - * objfiles.c (add_to_objfile_sections): All targets to define - TARGET_KEEP_SECTION to permit them to retain bfd sections that - GDB would otherwise have discarded. - -Fri Jun 5 13:56:19 1998 Doug Evans - - * dbxread.c (read_dbx_symtab): Don't lower texthigh for last psymtab. - -Thu Jun 4 18:35:04 1998 Stan Shebs - - * remote.c (init_extended_remote_ops): Make extended_remote_ops - by copying from remote_ops, move it and init_remote_ops to - usual place at end of file, remove "void" from arg lists. - -Thu Jun 4 17:51:06 1998 Mark Alexander - - * sparc-tdep.c (sparc_fix_call_dummy): Byte-swap the call dummy - on bi-endian machines. - (sparc_extract_return_value): Handle values smaller than int on - machines with little-endian data. - (sparc_target_architecture_hook): Set bi_endian flag. - -Thu Jun 4 12:14:48 1998 Michael Snyder - - * printcmd.c (disassemble_command): Fix off-by-one error for - disassembling functions in unmapped overlay sections. - -Thu Jun 4 10:15:03 1998 Elena Zannoni - - * remote.c: merged. - - - Jim Blandy - (print_packet, remote_packet_command): New functions. - (_initialize_remote): Register the remote-packet command. - - David Taylor - (_initialize_remote): remote-compare is now - compare-sections. - - Elena Zannoni - (remote_compare_command): added warning, issued in case - of mismatch only. - -Thu Jun 4 08:25:38 1998 Michael Snyder - - * remote.c (remote_compare_command): New function, new command. - Compare object file binary image with corresponding memory on - remote target. Report differences. - -Tue Jun 2 19:05:04 1998 Mark Alexander - - * sparc-tdep.c (sparc_target_architecture_hook): Set target - byte order only when it's selectable. - -Tue Jun 2 02:01:56 1998 Mark Alexander - - * sparc-tdep.c (sparc_target_architecture_hook): New function to - set endianness based on machine type. - (_initialize_sparc_tdep): Initialize target_architecture_hook. - (sparc_print_register_hook): Print PSR and FPSR in fancy format - on 32-bit machines. - * config/sparc/tm-sparc.h (PRINT_REGISTER_HOOK): Redefine to - call sparc_print_register_hook instead of using inline code. - * config/sparc/tm-sp64.h (PRINT_REGISTER_HOOK): Remove. - -Thu May 28 17:19:14 1998 Keith Seitz - - * main.c (main): Check for NULL from getenv on CYGWIN32. - -Thu May 28 09:41:44 1998 Nick Clifton - - * monitor.c (monitor_vsprintf): Handle %%. Patch courtesy of - Felix Lee (flee@cygnus.com) - -Thu May 28 00:27:35 1998 Peter Schauer - - * mips-tdep.c (mips_push_dummy_frame): Fix calculation of - PROC_REG_OFFSET and PROC_FREG_OFFSET. - -Mon Apr 27 14:37:49 1998 Andrew Cagney - - * config/v850/tm-v850.h (REGISTER_BYTE): FP_REGNUM and - FP_RAW_REGNUM use the same register location. - - * v850-tdep.c (v850_scan_prologue): Use FP_RAW_REGNUM instead of - FP_REGNUM. - (v850_frame_chain): Ditto. - - * config/v850/tm-v850.h (REGISTER_NAMES): Add "fp". - (NUM_REGS): Update. - (FP_REGNUM): Update. - (FP_RAW_REGNUM): Define. - -Wed May 27 14:22:31 1998 Keith Seitz - - * main.c (main): Convert the path returned from getenv to a posix - path on cygwin32 hosts. - -Mon May 25 13:31:27 1998 Keith Seitz - - * remote.c (remote_open_1): If an error occurs starting the remote, - pop the target AND return. - -Sat May 23 02:23:09 1998 Peter Schauer - - * dwarf2read.c (read_subroutine_type): Set TYPE_FLAG_PROTOTYPED - on C++ functions. - * valops.c (value_arg_coerce): Add new argument to indicate whether - the function has a prototype, handle integer and float promotions - accordingly. - (call_function_by_hand): Always call value_arg_coerce, pass down - prototype information. - -Fri May 22 10:56:36 1998 John Metzler - - * remote.c (_initialize_remote): Typo extended__remote - -Thu May 21 13:14:25 1998 John Metzler - - * gnu-nat.c (init_gnu_ops): Initialization of target ops by assignment. - (_initialize_gnu_nat): Call new init - * mac-nat.c (init_child_ops): Ditto. - (_initialize_mac_nat): Ditto. - * monitor.c (init_base_monitor_ops): Ditto. - (_initialize_remote_monitors): Ditto. - * ppc-bdm.c (init_bdm_ppc_ops): Ditto. - (_initialize_bdm_ppc): Ditto. - * remote-adapt.c (init_adapt_ops): Ditto. - (_initialize_remote_adapt): Ditto. - * remote-array.c (init_array_ops): Ditto. - (_initialize_array): Ditto. - * remote-bug (init_bug_ops): Ditto. - (_initialize_remote_bug): Ditto. - * remote-e7000.c (init_e7000_ops): Ditto. - (_initialize_remote_e7000): Ditto. - * remote-eb.c (init_eb_ops): Ditto. - (_initialize_remote_eb): Ditto. - * remote-es.c (init_es1800_ops): Ditto. - (init_es1800_child_ops): Ditto. - (_initialize_es1800): Ditto. - * remote-hms.c (init_hms_ops): Ditto. - (_initialize_remote_hms): Ditto. - * remote-mm.c (init_mm_ops): Ditto. - (_initialize_remote_mm): Ditto. - * remote-nindy.c (init_nindy_ops): Ditto. - (_initialize_nindy): Ditto. - * remote_nrom.c (init_nrom_ops): Ditto. - (_initialize_remote_nrom): Ditto. - * remote-os9k (init_rombug_ops): Ditto. - (_initialize_remote_os9k): Ditto. - * remote-rdi.c (init_rdi_ops): Ditto. - (_initialize_remote_rdi): Ditto. - * remote-rdp.c (init_remote_rdp_ops): Ditto. - (_initialize_remote_rdp): Ditto. - * remote-sds.c (init_sds_ops): Ditto. - (_initialize_remote_sds): Ditto. - * remote-sim.c (init_gdbsim_ops): Ditto. - (_initialize_remote_sim): Ditto. - * remote-st.c (init_st2000_ops): Ditto. - (_initialize_remote_st2000): Ditto. - * remote-udi.c (init_udi_ops): Ditto. - (_initialize_remote_udi): Ditto. - * remote-vx.c (init_vx_ops): Ditto. - (init_vx_run_ops): Ditto. - (_initialize_vx): Ditto. - * remote.c (init_remote_ops): Ditto. - (init_extended_remote_ops): Ditto. - (_initialize_remote): Ditto. - * sparcl-tdep.c (init_sparclite_ops): Ditto. - (_initialize_sparcl_tdep): Ditto. - * v850ice.c (init_850ice_ops): Ditto. - (_initialize_v850ice): Ditto. - * win32-nat.c: (init_child_ops): Ditto. - (_initialize_inftarg): Ditto. - -1998-05-21 Jim Blandy - - * ax-gdb.c (const_var_ref): Don't handle function names. I don't - want to implement all the "usual unary conversion" rules for - constants. - (gen_usual_unary): Turn "function" values into "pointer to - function" values, in accordance with ANSI. - (gen_deref): Don't do the usual unary conversions here. Let the - caller do it. Note that dereferencing a function pointer yields - a function designator, which we call an rvalue, not an lvalue. - (gen_address_of): Handle functions specially. - (gen_struct_ref): Perform the usual unary conversions before - calling gen_deref. - (gen_expr): In case for the prefix '*' operator, call - gen_usual_unary manually. - -Wed May 20 15:29:41 1998 Gavin Koch - - * mips/tm-tx39.h (MIPS_DEFAULT_FPU_TYPE): Defined as MIPS_FPU_NONE. - * mips/tm-tx39l.h: Same. - -Wed May 20 10:12:11 1998 John Metzler - - * m32r-tdep.c: (decode_prologue): Handle frames compiled with -Os. - Split out as separate function called by skip prologue and scan - prologue. new formula handles optimization in which the prologue - is interleaved with the body of the function. Also recognizes new - variations of prologue encoding. Use of frame pointer is - essential to debugging, -fno-omit-frame-pointer - (m32r_skip_prologue): Call decode prologue, ignore line info - (m32r_scan_prologue): Call decode prologue, ignore line info. - -Tue May 19 17:23:54 1998 John Metzler - - * w89k-rom.c (_initialize_w89k): Call new init function - (init_w89k_cmds): Convert to dynamic initialization of monitor_ops - data structure for forward compatability with additions to the - data structure. - * dbug-rom.c (_initialize_dbug_rom): ditto - (init_dbug_cmds): ditto - * m32r-rom.c (_initialize_m32r_rom): ditto - (init_m32r_cmds): ditto - -Tue May 19 14:54:11 1998 Michael Snyder - - * tracepoint.c (memrange_cmp): use const void * args to avoid - ANSI compiler warnings. - -1998-05-19 Jim Blandy - - * ax-gdb.c (gen_fetch, gen_var_ref, gen_deref, find_field, - gen_bitfield_ref, gen_expr): Call error, not abort. - * ax-general.c (read_const, generic_ext, ax_trace_quick, - ax_label, ax_const_d, ax_reg, ax_print): Same. - - * tracepoint.c: Remove the $(...) syntax for memranges. - (validate_actionline, encode_actions, trace_dump_command): Remove - clauses for the $(...) syntax. - (parse_and_eval_memrange): Function deleted. - (_initialize_tracepoint): Update function description. - - * gdbtk.c (struct wrapped_call_objs): Change the `func' member to - be a Tcl_ObjCmdProc, not an Tcl_CmdProc, since it accepts a vector - of objects as arguments. Change the object vector to be const, - since that's what all the users of this structure seem to expect. - (call_obj_wrapper): Cast clientData properly before storing it in - the wrapped_args structure. - - * ax-gdb.c (_initialize_ax_gdb): Make the "agent" command a - subcommand of "maintenance", as it should have been from the - beginning. #include "gdbcmd.h", to get the declaration for - maintenancelist. - * Makefile.in: Document that dependency. - -Tue May 19 12:00:58 1998 Elena Zannoni - - * tracepoint.c (get_tracepoint_by_number): new function, to access - traceframe_number for use of the GUI. - - * tracepoint.h: added prototype for get_traceframe_number. - -Mon May 18 13:34:27 1998 Keith Seitz - - * dbxread.c (process_one_symbol): If block addresses are relative to - function start addresses, reset function_start_address whenever a new - source file is seen. - -Mon May 18 13:04:27 1998 Michael Snyder - - * tracepoint.c (get_tracepoint_by_number): make sure to advance - arg pointer even if we fail to parse a useful number. Otherwise, - since this function is called in a loop, it may loop forever! - Also change strtol call to allow arbitrary radix. - (map_args_over_tracepoints (and other places)): add QUIT; call - to loop, to allow breakout using control-C. Not all loops were - analyzed to make sure they could terminate cleanly, but even - terminating with a messed-up tracepoint list would be better - than not terminating at all! - (tdump_command): check to see if we're connected to a trace- - capable target (currently only "remote") before doing anything - else. - -Sat May 16 22:21:48 1998 Frank Ch. Eigler - - * config/d30v/tm-d30v.h (INIT_FRAME_PC_FIRST): Fill in PC into - frame struct before extracting saved register offsets. - -Fri May 15 22:47:45 1998 Michael Snyder - - * tracepoint.c (encode_actions): fix typo in printf format string. - -1998-05-15 Jim Blandy - - Implement a few more tracing operators: ^ | & ~ ! - * ax-gdb.c (gen_integral_promotions, gen_logical_not, - gen_complement): New functions. - (gen_binop): New argument MAY_CARRY, indicating whether we need to - correct the upper bits of the value after performing the - operation. Callers changed. - (gen_expr): Handle BINOP_BITWISE_AND, BINOP_BITWISE_IOR, and - BINOP_BITWISE_XOR here as well, by calling gen_binop. Handle - UNOP_LOGICAL_NOT, UNOP_COMPLEMENT. - - * ax-gdb.c (gen_conversion): Reworked to avoid some unnecessary - sign extension. - - * ax-gdb.c (gen_usual_arithmetic): Renamed from gen_usual_binary, - to match the ANSI C standard better. Callers changed. - - * ax-gdb.c (gen_traced_pop): Add prototyped declaration. - -Fri May 15 18:18:38 1998 David Taylor - - * tracepoint.c (stringify_collections_list): return a collection - of strings rather than a single string. - (free_actions_list): new function. - (encode_actions): process collection of strings returned by - stringify_collections_list. - -1998-05-15 Jim Blandy - - * ax-gdb.c (gen_traced_pop): New function. - (gen_expr): Call it for comma operator. - (gen_trace_for_expr): Call it, instead of writing it out. - - Add facilities for sending arbitrary packets to the remote agent. - There are a bunch of improvements to make (make it generic; handle - 'O' replies properly), but I just want to get this onto the branch. - * remote.c (print_packet, remote_packet_command): New functions. - (_initialize_remote): Register the remote-packet command. - -Thu May 14 17:52:31 1998 Elena Zannoni - - * tracepoint.c: move actionline_type definition to tracepoint.h. - (validate_actionline): make non static. - - * tracepoint.h: move actioline_type definition from tracepoint.c. - (validate_actionline) moved prototype from tracepoint.c. - -Thu May 14 11:49:18 1998 David Taylor - - * tracepoint.c (validate_actionline): add additional error - checking, remove some dead code. - (encode_actions): additional cleanups. - (trace_find_command): remove some dead code. - (trace_find_pc_command): ditto. - (trace_find_tracepoint_command): ditto. - (trace_find_line_command): ditto. - (trace_find_range_command): ditto. - (trace_find_outside_command): ditto. - -Thu May 14 5:51:00 1998 Ron Unrau - - * symtab.c (decode_line_1): set section for "break *" - -Wed May 13 20:58:02 1998 Mark Alexander - - * corefile.c (reopen_exec_file): Reopen the exec file if - it has changed. - -Wed May 13 15:22:02 1998 Mark Alexander - - * sparc-tdep.c (fetch_instruction): New function. - (single_step, sparc_init_extra_frame_info, examine_prologue): - Use fetch_instruction instead of read_memory_integer - to ensure that instructions are always read as big-endian. - -Wed May 13 14:42:21 1998 Ian Lance Taylor - - * configure.in: Add AC_FUNC_ALLOCA. - * defs.h: Check HAVE_ALLOCA_H rather than sparc. Add _AIX pragma - alloca. - * configure: Rebuild. -start-sanitize-java - * Makefile.in (jv-lang.o, jv-typeprint.o, jv-valprint.o): New - targets. -end-sanitize-java - -Wed May 13 11:19:08 1998 Michael Snyder - - * tracepoint.c (trace_command): Remove old diagnostic code that was - preventing tracepoints from being defined with a full-path filename. - -Tue May 12 13:17:35 1998 Frank Ch. Eigler - - * stabsread.c (read_one_struct_field): Check for typedef in type - tree before clearing bitfield information. - -1998-05-11 Jim Blandy - - * ax-gdb.c (gen_binop): New function, based on gen_mul, to replace - gen_mul and gen_div, and handle `%' op as well. Correctly tests - type of arguments. - (gen_expr): Factor out common code in binary arithmetic operators. - Add support for `%'. - (gen_mul, gen_div): Removed. - -Thu May 7 14:49:38 1998 Bob Manson - - * config/sparc/tm-sp64.h (CALL_DUMMY): Store and retrieve - %o0-%o5 as 64-bit values; compensate for stack bias. - (USE_STRUCT_CONVENTION): We only pass pointers to structs - if they're larger than 32 bytes. - (REG_STRUCT_HAS_ADDR): Ditto. - - * sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp() - instead of read_register. If the target is a sparc64 and the frame - pointer is odd, compensate for the stack bias. - (get_saved_register): Use read_sp(). - (DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES. - (sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64, - save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers. - (sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC, - CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a - dummy frame. - (sparc_pop_frame): Use write_sp(). If the target is a sparc64 and - the FP is odd, compensate for stack bias. - (sparc_store_return_value): Right-justify the return value before - writing it to %o0. - (sparc_fix_call_dummy): Don't NOP out part of the call dummy on - sparc64. - (sparc64_read_sp, sparc64_read_fp, sparc64_write_sp, - sparc64_write_fp, sp64_push_arguments, - sparc64_extract_return_value): New functions to support the - sparc64 ABI. - - * dwarfread.c (handle_producer): Set processing_gcc_compilation to - the right version number. - - * dwarf2read.c (read_file_scope): Assume we're processing - GCC2 output. - -Wed May 6 16:34:03 1998 Jeffrey A Law (law@cygnus.com) - - * somsolib.c: Include gdb_stat.h. - -Mon May 4 18:34:01 1998 David Taylor - - * ax-gdb.c (gen_mul): new function; (gen_div): new function; - (gen_expr): add support for * and / operators, call gen_mul and - gen_div as appropriate. - -Mon May 4 16:24:22 1998 Mark Alexander - - * defs.h (make_run_cleanup): Declare. - * solib.c (find_solib): Pass correct number of arguments to - make_run_cleanup. - -Mon May 4 07:08:25 1998 Michael Snyder - - * tracepoint.c (trace_actions_command): actions command must set - step_count to zero (in case previous actions have set it but the - new set does not). - -Sat May 2 09:35:07 1998 Stu Grossman - - * ocd.h: Add new flags, function codes, and processor types to support - new Wiggler capabilities. - * (ocd_write_bytes_size): New function to allow atomic writes of - memory in sizes larger than a byte. - - * ser-unix.c (baudtab): Add 57600, 115200, 230400, and 460800 baud. - -Fri May 1 19:51:32 1998 Frank Ch. Eigler - - * stabsread.c (read_one_struct_field): Do not override supplied - bitfield size for a range type value. - - * gdbtypes.c (create_range_type): For a range with positive - lower limit, declare range type as unsigned. - -Fri May 1 10:58:34 1998 John Metzler - - * monitor.c: Turn off debug - -Fri May 1 09:29:56 1998 Peter Schauer - - * breakpoint.c (delete_command): Skip internal breakpoints when - all breakpoints are requested. - - * stabsread.c (define_symbol): Record parameter types from Sunpro - function stabs in the TYPE_FIELDS of the function type. - -Thu Apr 30 15:59:54 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * Makefile.in (config-check-targets, config-check-hosts): Removed. - -1998-04-30 Paul Eggert - - * Makefile.in (maintainer-clean): - Don't get ahead of yourself and delete Makefile - before running `make'. - (local-maintainer-clean, do-maintainer-clean): New rules. - -Wed Apr 29 14:02:59 1998 David Taylor - - * ax-gdb.c (gen_add): when adding a pointer and an int, use - the size of the pointer, not the int (typo) to decide how - to extend the result. - -Wed Apr 29 10:20:40 1998 John Metzler -start-sanitize-vr4111 - - * nec4102rom.c: New file implements ROM monitor adapter for - nec-vr4102 board. This board hosts the vr4111 chip. This file - required extensions to the monitor_ops structure, hooks for wait - filter, new flags. This version does not support more than one - breakpoint and resuming after a breakpoint in 16 bit mode is - completely disfunctional. -end-sanitize-vr4111 - - * monitor.h: Defined additional hooks for dmpregs, configure_hooks - and wait_filter. These additions require that all ROM monitor - interfaces be recoded to initialize monitor ops using assignments - rather than static structure initialization. Added new bits to - flags MO_EXACT_DUMPADDR, MO_HAS_BLOCKWRITES. - - * monitor.c (RDEBUG): Conditional tracing throughout the file. - (fromhex): Now recognized upper cse hex digits - (monitor_printf_noecho): - (monitor_readchar): Tracing interferes with input timing. - (monitor_open): Register different memory write functions with - dcache_init if MO_HAS_BLOCKWRITES. - (flush_monior_dcache): Added as an additional utilty. - (monitor-resume): Call continue hook if one has been supplied. - (monitor_wait_filter): New function Factored out of monitor wait - and used if alternate wait-filter has not been provided. - (monitor_wait): call alternate wait filter if provided. Call - monitor_dump_regs, a new function factored out from inline code. - (monitor_dump_block): A new function used as a utility when - monitors must dump several blocks of registers using different - commands. - (monitor_dump_regs): Call alternate function if provided. Uses new - hook in monitor.h. - (monitor_write_memory): Engage previouly added hook - MO_FILL_USES_ADDR. - (monitor_write_even_block): new function supports writing long - blocks of 4byte words. - (longlongendswap): new internal function - (monitor_write_memory_longlongs): new function writes large blocks - using command to enter a long long. - (monitor_write-memory_block): new Function figures out which block - mod to use. - (monitor_read_memory): Can now handle dump formats in which the bytes - preceeding the requested data is not printed. - -Tue Apr 28 19:41:33 1998 Tom Tromey - - * Makefile.in (GDBTKLIBS): New macro. - (INSTALLED_LIBS): Include GDBTKLIBS. - (CLIBS): Likewise. - * configure: Rebuilt. - * configure.in: Put Tcl/Tk libs into GDBTKLIBS, not LIBS. - (GDBTKLIBS): AC_SUBST. - - * tracepoint.c (memrange_cmp): Another typo fix; `memrbnge' -> - `memrange'. - - * tracepoint.c (memrange_cmp): Fixed typo in function intro. - -Tue Apr 28 17:41:20 1998 Philippe De Muyter - - * symfile.c (overlay_auto_command): Add forgotten parameter definitions. - (overlay_manual_command, overlay_off_command): Likewise. - (overlay_load_command): Likewise. - * tracepoint.c (memrange_cmp): Parameters have type void *, not - struct memrange *. - -Tue Apr 28 11:08:25 1998 John Metzler - - * rom68k-rom.c (_initialize_rom68k): Fix unresolved init_rom_68kcmds. - -Mon Apr 27 14:32:21 1998 Mark Alexander - - * config/sparc/tm-sparc.h (CALL_DUMMY): Shorten it drastically, - make it work on the simulator. - (FIX_CALL_DUMMY): Convert to function call instead of inline code. - (sparc_fix_call_dummy): Declare. - * sparc-tdep.c (sparc_fix_call_dummy): New function, taken from - old FIX_CALL_DUMMY macro, with additional fixes for simulator. - (sparc_push_dummy_frame): Set registers differently on simulator - to prevent corrupted register window save areas. - -Mon Apr 27 13:46:40 1998 John Metzler - - * rom68k-rom.c (_initialize_rom68k, init_rom68k_cmds): - Convert all static initializations of monitor ops structures to - executable initializations in order that additions to the data - structure definition can me made without repeating this editing - exercise. - * abug-rom.c (_initialize_abug_rom, init_abug-cmds): Ditto. - * cpu32bug-rom.c (_initialize_cpu32bug_rom, init_cpu32bug_cmds): Ditto. - * mon960-rom.c (initialize_mon960, init_mon960_cmds): Ditto. - * op50-rom.c (initialize_op50n, init_op50n_cmds): Ditto. - * ppcbug-rom.c (_initialize_ppcbug_rom, init_ppc_cmds): Ditto. - * sh3-rom.c (_initialize_sh3_rom, init_sh3_cmds): Ditto. - * sparclet-rom.c (_initialize_sparclet, init_sparclet_cmds): Ditto. - * remote-est.c (_initialize_est, init_est_cmds): Ditto. - * remote-hms.c ( _initialize_remote_hms, init_hms_cmds): Ditto. - -Mon Apr 27 10:43:04 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * gdb_string.h (strdup): Don't specify arguments in prototype. - -Sun Apr 26 07:57:21 1998 Peter Schauer - - * rs6000-nat.c (vmap_ldinfo): Issue warning instead of error if - fstat on ldinfo_fd fails. Use objfile->obfd instead of vp->bfd - to check for reference to the same file. - - * target.c (target_read_string): Handle string transfers at the - end of a memory section gracefully. - -Fri Apr 24 17:18:56 1998 Geoffrey Noer - - * Makefile.in: enable EXEEXT setting - -Fri Apr 24 11:53:49 1998 David Taylor - - * tracepoint.c (add_local_symbols): change type of type from - char to int so that type shows up as 'A' or 'L' not 0. - -start-sanitize-r5900 -Fri Apr 24 11:25:07 1998 Jeffrey A Law (law@cygnus.com) - - * mips-tdep.c (mips32_decode_reg_save): Handle 128bit wide - GPR loads/stores generated on the r5900. - (mips_find_saved_regs, mips32_skip_prologue): Likewise. - * mips/tm-r5900.h (R5900_128BIT_GPR_HACK): Define. - * mips/tm-txvu.h (R5900_128BIT_GPR_HACK): Likewise. - -end-sanitize-r5900 -Thu Apr 23 16:37:20 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * README: Minor changes for 4.17 release. - -start-sanitize-java -Thu Apr 23 15:44:39 1998 Per Bothner - - * symfile.c (deduce_language_from_filename): .class implies java. - -end-sanitize-java -Thu Apr 23 12:52:21 1998 Philippe De Muyter - - * configure.in (strerror): Check if function must be declared. - * acconfig.h (NEED_DECLARATION_STRERROR): New define slot. - * gdb_string.h (strerror): Function declaration issued if - NEED_DECLARATION_STRERROR. - * configure, config.in : Files regenerated. - -Thu Apr 23 12:27:43 1998 Philippe De Muyter - - * symfile.c (simple_overlay_update_1): Do not prefix array address - by `&'. - * bcache.h (BCACHE_DATA_ALIGNMENT): Ditto. - * tracepoint.c (encode_actions): Ditto. - * language.c, complaints.c, utils.c (varargs.h): Do not include that - file here, it is already included indirectly by defs.h. - * dbxread.c (dbx_symfile_init, process_one_symbol): Cast xmalloc return - value to the appropriate pointer type. - * utils.c (floatformat_from_doublest): Ditto. - * tracepoint.c (read_actions, _initialize_tracepoint): Ditto. - (add_memrange): Likewise with xrealloc return value. - * stabsread.c (ref_add): Ditto. - * coffread.c (coff_symfile_init): Likewise for xmmalloc return value. - * elfread.c (elf_symfile_read): Ditto. - * os9kread.c (os9k_symfile_init): Ditto. - -Thu Apr 23 00:32:08 1998 Tom Tromey - - * config.in: Rebuilt. - * acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_STPCPY, HAVE_GETTEXT, - HAVE_LC_MESSAGES): Define. - -Wed Apr 22 15:38:56 1998 Tom Tromey - - * configure: Rebuilt. - * configure.in: Call CY_GNU_GETTEXT. - * Makefile.in (top_builddir): New macro. - (INTL): Define to @INTLLIBS@. - (INTL_DEPS): New macro. - (CDEPS): Reference INTL_DEPS, not INTL. - -start-sanitize-sky -Wed Apr 22 13:40:16 1998 Doug Evans - - * txvu-tdep.c (txvu_print_insn): Fix thinko. - -end-sanitize-sky -Wed Apr 22 12:58:23 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - Handle missing shared libraries during the examination of a core - dump gracefully. - * solib.c (find_solib): Use catch_errors around call to - solib_map_sections. Use warning instead of error if reading of - the shared library name fails. - (solib_map_sections): Change return and argument types to make - it callable from catch_errors. - (symbol_add_stub): Avoid GDB core dump if solib->abfd is NULL. - * irix5-nat.c, osfsolib.c (xfer_link_map_member, solib_map_sections, - symbol_add_stub): Ditto. - -Wed Apr 22 14:34:49 1998 Michael Meissner - - * Makefile.in (INTL*): Add support to link in the intl library, - and to add -I options to its source and object directories. - (INTERNAL_CFLAGS): Ditto. - (C{LIBS,DEPS}): Ditto. - -start-sanitize-sky -Wed Tue 21 17:29:48 1998 Jim Lemke - * configure.in: Add configure option --with-sim-funit. - -end-sanitize-sky -Tue Apr 21 11:20:54 1998 Frank Ch. Eigler - - * mips-tdep.c (gdb_print_insn_mips): Disassemble MIPS instructions - with subtarget-specific `mach', rather than fixed default. - * config/mips/tm-mips.h (TM_PRINT_INSN_MACH): New macro, default - disassembly `mach'. -start-sanitize-r5900 - * config/mips/tm-r5900.h (TM_PRINT_INSN_MACH): Override. -end-sanitize-r5900 -start-sanitize-sky - * config/mips/tm-txvu.h (TM_PRINT_INSN_MACH): Override. -end-sanitize-sky - -Mon Apr 20 15:35:03 1998 Philippe De Muyter - - * coffread.c (decode_base_type): Treat a long field with size greater - than TARGET_LONG_BIT as long long. - * values.c (value_from_longest): Print code value in error message. - -Mon Apr 20 15:32:21 1998 Mark Kettenis - - * gdb/gdb_string.h (strdup): Declare only if not defined as a - macro. - -Mon Apr 20 14:18:45 1998 J. Kean Johnston - - * procfs.c: Added replacement macros for LWP stuff. Fixed support - for UnixWare / SVR4.2MP targets and any targets which use - multi-file /proc entries. Fixed support for hardware watchpoints. - * solib.c: SCO needs some of the same code as SunOS. Change - preprocessor conditionals. - - * config/i386/i386sco5.mt: New file. - * config/i386/tm-i386sco5.h: New file. - * config/i386/i386sco5.mh (NATDEPFILES): add i386v-nat.o. - * config/i386/nm-i386v42mp.h - (TARGET_HAS_HARDWARE_WATCHPOINTS): define. - Add other macros for hardware assisted watchpoints. - * config/i386/nm-i386sco5.h: Correct attributions. - (TARGET_HAS_HARDWARE_WATCHPOINTS): define. - * config/i386/nm-linux.h (target_remote_watchpoint): Pass - 'type' through to i386_insert_watchpoint. - -Mon Apr 20 14:12:30 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * infrun.c (wait_for_inferior): Don't add signalled processes - as new threads. - * procfs.c (wait_fd): Note if LWP has exited. - (procfs_wait): use GETPID to get process ID. - -Sat Apr 18 15:21:04 1998 Stan Cox - - * configure.tgt: Added sparc86x support. - -Thu Apr 16 13:13:24 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * rdi-share/etherdrv.c (EthernetWrite): Use strerror to get - error string if in an ANSI C-ish environment. - -Wed Apr 15 18:59:48 1998 Mark Alexander - - * sparc-tdep.c (SPARC_HAS_FPU): Define. - (sparc_extract_return_value): New function, required to handle - machines without floating point. - (sparc_store_return_value): Ditto. - * config/sparc/tm-sparc.h (EXTRACT_RETURN_VALUE): Call - sparc_extract_return_value instead of using inline code. - (sparc_extract_return_value): Declare. - (STORE_RETURN_VALUE): Call sparc_store_return_value instead - of using inline code. - (sparc_store_return_value): Declare. - -Wed Apr 15 12:19:42 1998 Martin M. Hunt - - * solib.c (enable_break): Only call warning once - instead of three times. - -Tue Apr 14 16:52:59 1998 Mark Alexander - - * sparc-tdep.c (sparc_extract_struct_value_address): Make it - work correctly on little-endian hosts. - (sparc_push_arguments): New function. - (gdb_print_insn_sparc): New function. - (_initialize_sparc_tdep): Make gdb_print_insn_sparc the default - disassembler, so that SPARClite-specific instructions will - be recognized. - * sparcl-tdep.c (readchar): Print debugging information. - (debug_serial_write): New function, a replacement for SERIAL_WRITE - that prints debugging information. - * config/sparc/tm-sparc.h (PUSH_ARGUMENTS): Define. - (sparc_push_arguments): Declare. - -Tue Apr 14 15:43:49 1998 John Metzler - - * gdbcfgxref (xref_menu): Call new regex and wild card searches - Now you can type in a specific triple like mips64-vr4300-elf or - somthing like mips*.h - (triple_search) wildcardsearch): The new functions - -start-sanitize-vr4320 - * configure.tgt: Switch over to use tm-4320.h. Since I switched to - MIPS EABI the fixes are no longer backward compatible with 4300. - * tm-vr4320.h: Added - * vr4320.mt: Added - -end-sanitize-vr4320 -Mon Apr 13 16:28:07 1998 Elena Zannoni - - * utils.c: (warning) added call to warning_hook - - * source.c: (find_source_lines) modified to call warning in case - of source vs. executable time stamp mismatch. Simplified object - file check. Initialized mtime to 0. - - * defs.h: added warning_hook prototype - - * top.c: added warning_hook prototype. - -Mon Apr 13 09:54:08 1998 Keith Seitz - - * config/sparc/tm-sun4os4.h (IS_STATIC_TRANSFORM_NAME): Add missing - definition. - -Fri Apr 10 22:36:28 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - Update support for x86 Solaris 2. - * config/i386/tm-i386sol2.h, nm-i386sol2.h: New configuration - files for x86 Solaris 2. - * config/i386/i386sol2.mt, i386sol2.mh: Use them. - * config/sparc/tm-sun4sol2.h (PROCFS_GET_CARRY): New macro, extract - carry flag from a given regset. - (IS_STATIC_TRANSFORM_NAME): New macro, check if a symbol name - is a SunPro transformed name. - * i386-tdep.c (sunpro_static_transform_name): New function to - extract the source name from a SunPro transformed name. - * inferior.h (procfs_first_available, procfs_get_pid_fd): - Add prototypes. - * infrun.c (wait_for_inferior): Handle breakpoint hit in - signal handler without intervening stop in sigtramp. - * procfs.c (procfs_lwp_creation_handler): Use PROCFS_GET_CARRY - instead of direct access to the status register. - (procfs_get_pid_fd): New function, returns procfs fd for a given pid. - * sol-thread.c (ps_lgetLDT): New function, returns LDT for a given - lwpid. - (sol_find_new_threads): Handle failed libthread_db initialization - gracefully. - * stabsread.c (define_symbol): Use IS_STATIC_TRANSFORM_NAME - to check for a SunPro transformed symbol name. - -Fri Apr 10 10:35:35 1998 John Metzler - - * utils.c (fmthex): A formatting function for hexdumps - - * mips-tdep.c (unpack_mips16): Fixed instruction decoding, lots of - bit pattern interpretations. mips_fetch_instruction does not work - for 16 bit instructions. Some confusion remains about sign - extension in backward branches. - (mips32_relative_offset): Sign extension - (mips32_next_pc): Major debugging, bit pattern interpretation - (print_unpack): debugging printf - (fetch_mips_16): new funtion, key on PC low bit, not symbol table - (mips16_next_16): Initial major debugging of this function. Lots - of bit pattern mistakes. - (mips_next_pc): key on low bit of PC, not symbol table. - * symfile.c(generic_load) : Added a download verification which - reads back the loade code. Download chunk size is now a defined - macro. Fixed a bug in which downloading slips into loading one - byte at a time. Lower level functions in monitor.c can load long - sequences of bytes and make use of these fixups. Referencing - bfd-start_address directly was incorrectly getting zero for start. - -Thu Apr 9 19:20:32 1998 Ian Lance Taylor - - * mips-tdep.c (do_fp_register_row): Use alloca rather than arrays - with dynamic size. - -Wed Apr 8 19:21:42 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * top.c (print_gdb_version): Print 1998 now. - -Wed Apr 8 16:57:22 1998 Philippe De Muyter - - * source.c: Remove obsolete decl of strstr(). - -Wed Apr 8 16:47:33 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * solib.c (solib_create_inferior_hook): Remove Ulrich Drepper's - patch of March 23 1998. - * breakpoint.c (breakpoint_re_set_one): Remove Ulrich Drepper's - patch of March 23 1998. - -Sat Apr 4 10:05:00 1998 Dawn Perchik - - * mdebugread.c (parse_partial_symbols): If this is an .mdebug - section in an ELF file, override a symbol's ECOFF section with its - ELF section. Also, fix stabs continuation where a stabs string - continues for more than one continuation. - -Mon Apr 6 09:17:48 1998 Andrew Cagney - - * mips-tdep.c (mips_push_arguments): Specify dimention of valbuf - using MAX_REGISTER_RAW_SIZE. - -Sat Apr 4 10:05:00 1998 Dawn Perchik - - * infrun.c: Fix prototype of signals_info to match static funtion. - -Thu Apr 2 12:47:41 1998 Frank Ch. Eigler - - * sol-thread.c (sol_thread_store_registers): Save & restore new - value of single updated register to prevent accidental clobbering. - -Wed Apr 1 22:01:09 1998 Mark Alexander - - * config/sparc/tm-sparclite.h (TARGET_BYTE_ORDER_SELECTABLE): Define. - * config/sparc/sparclite.mt: Link in the erc32 simulator. - -Wed Apr 1 16:30:49 1998 Ian Dall - - * ns32k-tdep.c (flip_bytes, ns32k_localcount, - ns32k_get_enter_addr, sign_extend): Restore functions mysteriously - deleted. - - * ns32knbsd-nat.c: New (?) file to support fetching and storing - registers on NetBSD hosts. - - * nbsd.mh (NATDEPFILES): put ns32knbsd-nat.o instead of - ns32k-nat.o - - * ns32km3-nat.c (reg_offset): Get order of floating point - registers correct. Add extra 32382 register offsets. - (REG_ADDRESS): define to point at correct part of thread - state. Use calls to "warning" instead of "message". - - * tm-nbsd.h, tm-ns32km3.h (REGISTER_NAMES, NUM_REGS, - REGISTER_BYTES, REGISTER_BYTE): redefine allowing for 32382 - fpu registers. - -Wed Apr 1 13:43:07 1998 Philippe De Muyter - - * NEWS: m68k-motorola-sysv host support added. - * coffread.c (coff_start_symtab): Accept the filename as an argument, - set it here. Callers updated. - -Wed Apr 1 23:13:23 1998 Andrew Cagney - - * config/mips/tm-mips.h (REGISTER_VIRTUAL_TYPE): Handle 32 bit SR, - FSR and FIR registers. - (REGISTER_VIRTUAL_SIZE): Compute using REGISTER_VIRTUAL_TYPE. - (REGISTER_RAW_SIZE): Define using REGISTER_VIRTUAL_SIZE. - - * config/mips/tm-mips64.h: Ditto. - -Tue Mar 31 21:30:39 1998 Nick Clifton - - * arm-tdep.c (gdb_print_insn_arm): Attach a fake Thumb symbol - vector to the info structure when disassembling thumb - instructions. - - * coffread.c (coff_symtab_read, read_one_sym, - process_coff_symbol): Support Thumb symbol types. - - * dbxread.c (process_one_symbol): Call SMASH_TEXT_ADDRESS (if it - is defined) for function symbols. - -Mon Feb 16 14:05:54 1998 Andrew Cagney - - * d10v-tdep.c (d10v_extract_return_value): Wierd. GCC wants to - return odd sized register quantities with only half of the first - register used! - - * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Use stack when - size > 8. - -Tue Mar 31 16:39:28 1998 Michael Snyder - - * tracepoint.c (get_tracepoint_by_number): change warning to note. - (delete_trace_command): suppress y/n query if no tracepoints, or - if not from_tty. (trace_pass_command): reject junk at end of args. - (read_actions): an action list consisting only of "end" is discarded. - (validate_actionline (for collect command)): an argument beginning - with a dollar_sign but not recognized as a special argument is - parsed like any other expression -- if it isn't a register name, - it's rejected. Also reject an empty argument to while-stepping. - (trace_find_command): reject a negative frame number argument. - (_initialize_tracepoint): set $traceframe initially to -1. - -Mon Mar 30 16:42:12 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * rdi-share/Makefile.am, rdi-share/aclocal.m4, - rdi-share/configure: New files. - * rdi-share/configure.in: Rewritten to be an autoconf input file. - * rdi-share/Makefile.in, rdi-share/configure: Generated by - automake/autoconf. - * rdi-share/dbg_hif.h, etherdrv.c, hostchan.c: Use autoconf tests - to check environment. - -Sun Mar 29 15:17:16 1998 Keith Seitz - - * tracepoint.c (trace_start_command): Set trace_running_p. - (trace_stop_command): Clear trace_running_p. - -Sat Mar 28 15:19:48 1998 Stan Shebs - - * NEWS: Update for 4.17 release. - -Fri Mar 27 10:15:50 1998 David Taylor - - * tracepoint.c (parse_and_eval_memrange): Fix memory leaks. - (encode_actions): Use the new gen_trace_for_expr function - instead of expr_to_address_and_size; collect registers when - using expressions. (clear_collection_list): Fix memory leak. - -1998-03-26 Jim Blandy - - * ax-gdb.h (gen_trace_for_expr): Add prototype. - -Thu Mar 26 17:24:23 1998 David Taylor - - * tracepoint.c (validate_actionline): Fix memory leak. - (encode_actions): Fix memory leak. - -Thu Mar 26 16:16:55 1998 David Taylor - - * tracepoint.c (trace_mention): New function. - (trace_command): Call it. - -1998-03-26 Jim Blandy - - * ax-general.c (ax_reqs): New function. - * ax.h (enum agent_flaws, struct agent_reqs): New types. - (agent_reqs): New extern prototype. Well, actually, this was - there before, due to a premature checkin. - (struct aop_map): Add new `data_size' member. - * ax-general.c (aop_map): Supply its value. - * ax-gdb.c (agent_command): Call ax_reqs, for testing. - - * ax-general.c (ax_print): If we encounter an invalid or - incomplete opcode, don't abort; just print an error message. - - * ax-gdb.c: Generate trace bytecodes, as appropriate. - (trace_kludge): New variable. - (gen_fetch, gen_bitfield_ref): Emit trace bytecodes, if asked - nicely. - (expr_to_agent): Ask for no trace bytecodes. - (gen_trace_for_expr): New function. - (agent_command): Call it, and display the result appropriately --- - no struct axs_value, so no type or kind information. - - * ax-gdb.c: Use TARGET_CHAR_BIT throughout, not HOST_CHAR_BIT. - -Thu Mar 26 22:29:28 1998 Elena Zannoni - - * tracepoint.c (trace_status_command): Recognize a boolean return - value from the stub to indicate whether trace experiment is - running. Export this value as a global state variable. - (trace_running_p) for use by the GUI. (from Michael Snyder) - (trace_pass_command) added call to modify_tracepoint_hook. - - * tracepoint.h export trace_running_p. - -Thu Mar 26 13:08:01 1998 David Taylor - - * tracepoint.c (validate_actionline): do not error out if - exp->elts[0].opcode is not on short line -- let - expr_to_address_and_size handle it. - -1998-03-26 Jim Blandy - - * tracepoint.c: Include "ax.h", not "agentexpr.h". - - * tracepoint.c (encode_actions): Call expr_to_address_and_size, - not simply expr_to_agent. - - * ax-general.c: Comment out code in progress, so everyone else can - at least compile. - - * gdbtypes.c: Doc fix. - - * ax.h, ax-gdb.h, ax-general.c, ax-gdb.c: New files. - * Makefile.in (REMOTE_OBJS): Add ax-general.o and ax-gdb.o. - (SFILES): Add ax-general.c, ax-gdb.c. - (ax_h): New variable. - (ax-general.o, ax-gdb.o): New rules. - -start-sanitize-sky -Wed Mar 25 11:45:19 1998 Frank Ch. Eigler - - * configure.in (sim-gpu2): Added target type checking to make - --with-sim-gpu2 option only valid for sky target. - * configure: Regenerated. -end-sanitize-sky - -Tue Mar 24 16:22:40 1998 Stu Grossman - - * Makefile.in: Derive SHELL from configure. - * config/d10v/d10v.mt config/m32r/m32r.mt - config/mn10200/mn10200.mt config/mn10300/mn10300.mt - config/d30v/d30v.mt : Remove -lm from SIM. This prevents - dependency checking of -lm (under NT native builds). (It is - automatically added by configure if it exists.) - * doc/configure mswin/configure nlm/configure - testsuite/gdb.base/configure testsuite/gdb.c++/configure - testsuite/gdb.chill/configure testsuite/gdb.disasm/configure - testsuite/gdb.stabs/configure testsuite/gdb.threads/configure: - Regenerate with autoconf 2.12.1 to fix shell issues for NT native - builds. - -Mon Mar 23 18:10:57 1998 Ulrich Drepper (drepper@cygnus.com) - - * solib.c (solib_create_inferior_hook): Rewrite previous - change to check the type of file via BFD. - -Mon Mar 23 13:52:28 1998 Ulrich Drepper (drepper@cygnus.com) - - * breakpoint.c (breakpoint_re_set_one): Treat bp_shlib_events - like bp_breakpoints. - * solib.c (solib_create_inferior_hook): Relocate section addresses - if the alleged start address doesn't agree with the PC. - -start-sanitize-sky -Mon Mar 23 13:07:22 1998 Frank Ch. Eigler - - * configure.in (sim-gpu2): Added --with-sim-gpu2 as configure - option, to allow gdb+sim linking with sky GPU2 library. - * configure: Regenerated. - -end-sanitize-sky -Sat Mar 21 19:34:49 1998 Elena Zannoni - - merged changes from Foundry (list follows by file/author): - - - Tom Tromey - * Makefile.in (gdbres.o): New target. - (WINDRES): New define. - * configure: Rebuilt. - * configure.in (WINDRES): Define. - (CONFIG_OBS): Include gdbres.o on Windows. - * gdbtool.ico: New file. - * gdb.rc: New file. - - * ser-unix.c - - Keith Seitz - (wait_for): Don't reset the timeout_remaining for CYGWIN32, - since we now effectively poll the serial port. - Don't reset the current_timeout, either, since this member is used - by hardwire_readchar to track the timeout and call the ui_loop_hook. - (hardwire_readchar): Poll the serial port for Cygwin32. We timeout - every second, update the UI, and loop around doing this until we - have hit the real timeout or we get data or an error. This will - allow the UI to stay active while gdb is "blocked" talking to the - target. - - Martin M. Hunt - (wait_for): Do reset current_timeout because it is only used to - keep track of what the current timeout for the scb is. - - * top.c - - Martin M. Hunt - (quit_confirm): Change exit message again - for GUI. - (pc_changed_hook): Add prototype. - - Tom Tromey - (quit_confirm): Added missing `else'. - (quit_confirm): Special-case message if init_ui_hook is - set. - - * symtab.c - - Martin M. Hunt - (find_pc_sect_line): If no symbol information - is found, return correct pc anyway. - (find_methods): Comment out an apparently - bogus error message because it messes up Foundry. - - * serial.c - - Martin M. Hunt - (_initialize_serial): Add a description of - "set remotelogbase". - - * findvar.c - - Martin M. Hunt - (write_register_gen): Add call to - pc_changed_hook if the PC is being changed. - - * defs.h - - Martin M. Hunt - (pc_changed_hook): Define. - - * command.c - - Martin M. Hunt - (do_setshow_command): If no arguments are supplied, - don't dump core, instead print out an error message. - - * breakpoint.c - - Martin M. Hunt - Make set_raw_breakpoint, set_breakpoint_count, - and breakpoint_count non-static so they are accessible from - gdbtk.c. - (enable_breakpoint): Enable breakpoint - with same disposition instead of changing all breakpoints - to donttouch. - - * annotate.h - - Keith Seitz - Add declarations for annotation hooks. - - * annotate.c - - Keith Seitz - Add hooks: annotate_starting_hook, annotate_stopped_hook, - annotate_signalled_hook, annotate_exited_hook. - (annotate_starting): If hook exists, call it instead. - (annotate_stopped): If hook exists, call it instead. - (annotate_exited): If hook exists, call it instead. - (annotate_signalled): If hook exists, call it instead. - -Fri Mar 20 14:45:36 1998 Michael Snyder - - * gdbserver/Makefile.in: add dependency on XM_CLIBS. - * gdbserver/low-sim.c (registers) force into alignment. - (create_inferior): Fix typo on new_argv; add abfd arg to - sim_open, sim_create_inferior. Add reg_size arg to - sim_fetch_register, sim_store_register. Make simulator - take a single-step to get into a known running state. - * gdbserver/gdbreplay.c: include fcntl.h for def'n of F_SETFL. - * gdbserver/server.c: Add remote_debug variable to control - debug output. - * gdbserver/server.h: Add prototypes for enable/disable_async_io. - * gdbserver/remote-utils.c: add verbose debugging output controlled - by "remote_debug" variable. Add call to "disable_async_io()" - to avoid being killed by async SIGIO signals. - * config/m32r/m32r.mt: define GDBSERVER_(LIBS and DEPFILES), - so that gdbserver can be built with the m32r simulator. - -Fri Mar 20 09:04:06 1998 Andrew Cagney - -start-sanitize-r5900 - * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE): Redefine as - expression from REGISTER_VIRTUAL_TYPE. - (REGISTER_RAW_SIZE): Ditto. - (REGISTER_VIRTUAL_TYPE): Redefine, use explicit size for 32 bit - registers. - -end-sanitize-r5900 - * gdbtypes.h (builtin_type_{,u}int{8,16,32,64}): New gdb builtin - types. -start-sanitize-r5900 - (builtin_type_{,u}int128): Ditto. -end-sanitize-r5900 - - * gdbtypes.c (_initialize_gdbtypes): Initialize new types. - - * mips-tdep.c (do_gp_register_row): Pad register value when GP - register is smaller than MIPS_REGSIZE. - - * findvar.c (value_of_register): When raw and virtual register - values identical, check that sizes are consistent. - -Thu Mar 19 11:32:15 1998 Michael Snyder (msnyder@cleaver.cygnus.com) - - * minsyms.c (compare_minimal_symbols): If addresses are identical, - then compare on names. Sorted list should have symbols with - identical addresses AND names adjacent, so dups can be discarded. - -Wed Mar 18 12:50:17 1998 Jeff Law (law@cygnus.com) - - * stabsread.c (define_symbol): Don't look for ',' as a LRS - indicator. - -Wed Mar 18 10:34:51 1998 Nick Clifton - - * rdi-share/etherdrv.c: Set sys_errlist[] as char * not const char *. - -Fri Mar 13 15:43:53 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * config/mips/xm-mips.h (CC_HAS_LONG_LONG): Undefine for Ultrix - when compiling with native cc, the compiler has broken long long - support. - -Fri Mar 13 15:37:02 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * config/m68k/xm-sun3os4.h: Remove malloc declarations, they - are handled via autoconf now. - * remote.c (remote_ops, extended_remote_ops): Replace static - forward declaration by moving the static definition to the top of - the file, for old K&R compilers. - * tracepoint.c (collect_symbol, trace_start_command): - Replace ANSI string concatenation with K&R compatible simple string. - -1998-03-11 Fred Fish - - * source.c (select_source_symtab): Don't reach error if we have - a current_source_symtab from reading in partial symbol table. - -start-sanitize-vr4320 -Tue Mar 10 16:15:13 1998 Gavin Koch - - * configure.tgt (mips64*vr4320*el-*-elf*) : Removed spurious case. - -end-sanitize-vr4320 -Fri Mar 6 13:10:27 1998 Fred Fish - - * utils.c (quit): Call SERIAL_DRAIN_OUTPUT rather than - SERIAL_FLUSH_OUTPUT. - * serial.h (struct serial_ops): Add drain_output, pointer to - function that waits for output to drain. - (SERIAL_DRAIN_OUTPUT): Macro to wait for output to drain. - * ser-unix.c (hardwire_drain_output): New function and prototype. - - * ser-unix.c (hardwire_ops): Add entry for drain_output function. - * ser-tcp.c (tcp_ops): Ditto. - * ser-ocd.c (ocd_ops): Ditto. - * ser-mac.c (mac_ops): Ditto. - * ser-go32.c (dos_ops): Ditto. - * ser-e7kpc.c (e7000pc_ops): Ditto. - -Thu Mar 5 16:07:41 1998 Michael Snyder (msnyder@cleaver.cygnus.com) - - * sparcl-tdep.c: fix #endif comments - -Thu Mar 5 15:10:35 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * Makefile.in (BISON): Configure substitutes in @YACC@, not @BISON@. - -Thu Mar 5 14:42:41 1998 Keith Seitz - - * ocd.c (ocd_open): If we fail ocd_start_remote, make sure we - error () so that we abort out of bdm_ppc_open. - -Wed Mar 4 16:53:52 1998 Martin M. Hunt - - * serial.c (_initialize_serial): Add a description of - "set remotelogbase". - - * command.c (do_setshow_command): If no arguments are supplied, - don't dump core, instead print out an error message. - -Wed Mar 4 16:50:18 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * gdbtk.c (gdb_listfiles): Fix thinko in last change. - -Wed Mar 4 15:34:49 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * gdbtk.c (gdb_listfiles): Allocate space for 'files' dynamically. - -Wed Mar 4 01:39:08 1998 Ron Unrau - - * elfread.c (elf_symtab_read): merge SYMBOL_IS_SPECIAL into - MAKE_MSYMBOL_SPECIAL - * config/mips/tm-mips.h: ditto - -Tue Mar 3 17:19:08 1998 John Metzler - -start-sanitize-vr4111 - * config/mips/tm-vr4xxx.h: implements vr4111 as separate from 4300 - * config/mips/vr4xxx.tm: implements vr4111 as separate from 4300 - * configure.tgt: Recognise mips64vr4111-*-elf as vr4xxx -end-sanitize-vr4111 - * dwarfread.c (read_tag_pointer_type): Pointer sizes now come from - TARGET_PTR_BIT rather from sizeof(char *) on host. - -Tue Mar 3 14:37:02 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * alpha-nat.c (fetch_osf_core_registers): Renamed from - fetch_aout_core_registers. - (alpha_osf_core_fns): Renamed from alpha_aout_core_fns, change - flavour to bfd_target_unknown_flavour for OSF core files. - -start-sanitize-vr4320 -Tue Mar 3 11:12:39 1998 Gavin Koch - - * configure.tgt (mips64*vr4320*el-*-elf*,mips64*vr4320*-*-elf*) : - Added. - -end-sanitize-vr4320 -Mon Mar 2 17:44:13 1998 Michael Snyder (msnyder@cleaver.cygnus.com) - - * breakpoint.c (_initialize_breakpoint): Make "en" an alias - for "enable" (so that it doesn't conflict with "end"). - -Mon Mar 2 17:04:25 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * Makefile (VERSION): Bump to 4.17.1. - -Mon Mar 2 16:59:15 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * rdi-share/etherdrv.c (sys_errlist): Add correct decl for Linux. - -Mon Mar 2 16:51:44 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * Makefile.in (YYFILES): Remove in maintainer-clean, not distclean. - -Mon Mar 2 16:47:11 1998 Philippe De Muyter - - * Makefile.in (distclean): Add `rm $(YYFILES)'. - -Mon Mar 2 16:45:48 1998 Philippe De Muyter - - * coffread.c (coff_read_enum_type): Set TYPE_FLAG_UNSIGNED if enum - is unsigned. - -Sun Mar 2 15:16:13 1998 Richard Henderson - - * configure.host, configure.tgt: Add sparc-linux. - * sparc-nat.c: Include not for Linux. - * config/sparc/*linux*: New files. - -Mon Mar 2 12:12:41 1998 Anthony Thompson (athompso@cambridge.arm.com) - - * arm-tdep.c (gdb_print_insn_arm): Call print_insn_big_arm - if we're big endian; else call print_insn_little_arm. - -Mon Feb 24 11:24:57 1998 Richard Henderson - - * Makefile.in (BISON): Don't even pretend to use yacc. - (c-exp.tab.o): Use bison -o to use a unique intermediate file. - (f-exp.tab.o, m2-exp.tab.o): Likewise. -start-sanitize-java - (jv-exp.tab.o): Likewise. -end-sanitize-java - -Tue Feb 24 03:32:59 1998 Andrew Cagney - - * remote-sim.c (gdbsim_fetch_register): Don't abort when the - register size is wrong. - -start-sanitize-r5900 -Tue Feb 24 02:53:41 1998 And - - * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE, - REGISTE_RAW_SIZE): Re-define. - -end-sanitize-r5900 -Thu Feb 19 16:49:48 1998 John Metzler - - * target.c (debug_to_fetch_registers,debug_to_store_registers, - debug-to_insert_breakpoint,debug_to_remove_breakpoint): tracing - 64 bit targets crashed long long printfs. - -Tue Feb 17 16:36:22 1998 Michael Snyder (msnyder@cleaver.cygnus.com) - - * symfile.c (read_target_int_array): rename read_target_long_array - and force the sizeof an ovly_table element to sizeof(long), - instead of sizeof(int). - -Tue Feb 17 18:05:05 1998 Frank Ch. Eigler - - * remote-mips.c (mips_request): Use unsigned long during parsing - returned value from monitor, to prevent accidental sign extension. - -Tue Feb 17 14:28:33 1998 Peter Schauer - - * acconfig.h: FORCE_MMCHECK changed to MMCHECK_FORCE. - * configure.in: Ditto. - * configure: Regenerated. - -Tue Feb 17 14:07:34 1998 Peter Schauer - - * gdbtypes.c (check_typedef): Do not try to resolve the length of - a type which has TYPE_FLAG_TARGET_STUB set, if the target type has - set TYPE_FLAG_TARGET_STUB as well. - -Tue Feb 17 14:32:18 1998 Andrew Cagney - - * remote-sim.c (gdbsim_fetch_register, gdbsim_store_register): - Pass register size to sim_{fetch,store}_register. Check nr of - register bytes transfered is correct. - -Mon Feb 16 14:05:54 1998 Andrew Cagney - - * remote-d10v.c (remote_d10v_open): Call push_remote_target - instead of open_remote_target. - - * remote.c (remote_xfer_memory): Use REMOTE_TRANSLATE_XFER_ADDRESS - to translate addr/size when defined. - (open_remote_target): Delete. - - * target.h (open_remote_target): Delete. - - * config/d10v/tm-d10v.h (REMOTE_TRANSLATE_XFER_ADDRESS): Define. - -Mon Feb 16 14:05:54 1998 Andrew Cagney - - * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when - sizeof type > 1. - -Mon Feb 16 14:05:54 1998 Andrew Cagney - - * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when - sizeof type > 1. - -Sun Feb 15 16:10:50 1998 Ron Unrau - - * parse.c (write_dollar_variable): call new function - target_map_name_to_register to allow targets to define their own - register name aliases. - * infcmd.c (registers_info): use target_map_name_to_register so that - "print $reg" and "info reg $reg" use the same register name aliases. - -Fri Feb 13 16:40:30 1998 Stan Shebs - - * config/i386/i386mk.mt (OBJFORMATS): Delete, no longer used. - * config/i386/xm-i386mk.h: Fix an include. - * config/pyr/tm-pyr.h (PC_INNER_THAN): Remove, never used. - -Thu Feb 12 16:12:07 1998 Frank Ch. Eigler - - * remote-mips.c (mips_enter_debug): Sleep before sending CR to - monitor. - (mips_exit_debug): Accept any whitespace / verbiage before monitor - prompt reappears. - -Thu Feb 12 18:25:42 1998 Andrew Cagney - - * d10v-tdep.c (show_regs): Avoid use of %llx when printing 8 byte - accumulators. - -Thu Feb 12 17:10:22 1998 Andrew Cagney - - * valops.c (value_at): For d10v, make read pointers with - read_target_unsigned_integer, keep addresses unsigned. - (value_fetch_lazy): Ditto. - -Thu Feb 12 12:14:02 1998 Andrew Cagney - - * remote-d10v.c: New file. Layer the d10v GDB->remote memory map - on top of the remote serial memory transfer functions. - - * config/d10v/d10v.mt (TDEPFILES): Add remote-d10v.o - - * Makefile.in (remote-d10v.o): Add dependencies. - - * remote.c (remote_open_1): Add arg extended_p, engage extended - protocol when extended_p. - (remote_open, extended_remote_open): Pass !extended_p / - extended_p to remote_open_1. - - * remote.c (open_remote_target), target.h: New function. - -Wed Feb 11 08:41:15 1998 Andrew Cagney - - * config/i386/fbsd.mh (XDEPFILES): Add ser-tcp.o. - -Tue Feb 10 17:50:37 1998 Keith Seitz - - * tracepoint.c (tracepoint_operation): Call the modify_tracepoint_hook - if it exists. - Remove static declaration of free_actions. - - * tracepoint.h: Add declaration of free_actions. - -Tue Feb 10 12:17:13 1998 Fred Fish - - * symtab.c (decode_line_1): Revert change that mistakenly - removed assignment of sals[0].pc field. - -Mon Feb 10 12:37:47 1998 Philippe De Muyter - - * m68k/tm-delta68.h (EXTRACT_RETURN_VALUE): Type argument for - `REGISTER_CONVERT_TO_VIRTUAL is `TYPE', not - `REGISTER_VIRTUAL_TYPE (FP0_REGNUM)'; - (STORE_RETURN_VALUE): Ditto, and offset for `write_register_bytes' - is `REGISTER_BYTE (FP0_REGNUM)', not `FP0_REGNUM'. - (FRAME_NUM_ARGS): New macro. - * m68k/tm-news.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Ditto. - * delta68-nat.c (clear_insn_cache): New function, forgotten in previous - patch. - -Mon Feb 9 11:10:06 1998 Andrew Cagney - - * d10v-tdep.c: Replace references to IMEM_ADDR and DMEM_ADDR with - D10V_MAKE_[DI]ADDR and D10V_CONVERT_[ID]ADDR_TO_RAW macros. - - * config/d10v/tm-d10v.h (IMEM_START): Move to 0x01...... - (DMEM_START): Move to 0x00...... - (STACK_START): Move to 0x00..7ffe. - (D10V_MAKE_IADDR, D10V_MAKE_DADDR): Translate unconditionally. - - * d10v-tdep.c (d10v_xlate_addr): Delete function. - -Mon Feb 9 15:10:21 1998 Fred Fish - - * symtab.c (fixup_psymbol_section): Move forward declaration to - top of file with other such decls. Make it a static function. - * symtab.h: Minor formatting tweaks. - -Mon Feb 9 13:14:12 1998 Stan Shebs - - * config/a29k-udi.mt, config/i960/vxworks960.mt (REMOTE_OBS): - Remove redefinition. - * config/i960/tm-i960.h (BREAKPOINT): Define. - -Mon Feb 9 15:35:38 1998 Ian Lance Taylor - - * Makefile.in (init.c): Ignore errors when making init.c. Seems - necessary to work around bug in Solaris make. - -Sun Feb 6 02:44:28 1997 Philippe De Muyter - - * m68k/tm-delta68.h (CPLUS_MARKER): Macro deleted. - (EXTRACT_STRUCT_VALUE_ADDRESS): Macro defined. - (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Macros modified - because floating-point values return via %fp0. - (CLEAR_INSN_CACHE): New macro. - * m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL): Macro fixed - to use DOUBLEST. - (REGISTER_CONVERT_TO_RAW): Ditto. - * infptrace.c (child_xfer_memory): If CLEAR_INSN_CACHE is defined, - call it after having written in child process's memory. - * inflow.c (PROCESS_GROUP_TYPE): Macro defined if HAVE_TERMIO. - (gdb_has_a_terminal, terminal_ours_1): Functions fixed for HAVE_TERMIO. - -Fri Feb 6 16:17:30 1998 Jeffrey A Law (law@cygnus.com) - - * config/mips/tm-mips64.h (TARGET_LONG_BIT): Allow final target to - override. - (TARGET_LONG_LONG_BIT): Likewise. - (TARGET_PTR_BIT): Likewise. -start-sanitize-r5900 - * config/mips/tm-r5900.h (TARGET_PTR_BIT): Define to 32 bits. -end-sanitize-r5900 - -start-sanitize-sky -Fri Feb 6 14:33:34 1998 Doug Evans - - * configure.tgt (mips64r5900*-sky-elf*): Replaces txvu-elf. - * config/mips/txvu.mt (SIM): txvu -> mips. - -end-sanitize-sky -Fri Feb 6 17:42:22 1998 Andrew Cagney - - * config/d10v/tm-d10v.h (D10V_CONVERT_IADDR_TO_RAW, - D10V_CONVERT_DADDR_TO_RAW): Define. - - * d10v-tdep.c (d10v_push_arguments): Re-write. Pass arguments in - registers, regardless of their size, when they fit. - -Thu Feb 5 13:16:36 1998 Andrew Cagney - - * d10v-tdep.c (d10v_extract_return_value): For function pointers - translate address to IMAP area. - - * config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Delete dummy from - struct. - (POP_FRAME): Point at generic_pop_current_frame. - - * d10v-tdep.c (d10v_pop_frame): Delete code handling dummy frames, - handled earlier. - (d10v_push_return_address): New function. - (d10v_pop_dummy_frame): Delete. - (d10v_fix_call_dummy): Delete. - (d10v_call_dummy_address): Delete. - - * d10v-tdep.c (d10v_init_extra_frame_info): Clear dummy and - frameless. - - * d10v-tdep.c (d10v_push_arguments): Keep stack word aligned. - - * config/d10v/tm-d10v.h (EXTRACT_STRUCT_VALUE_ADDRESS): Extract - address of structure from first ARG1_REGNUM. - - * d10v-tdep.c (d10v_push_arguments): Force 4 byte args into - even-odd register pair. Store 1 and 2 byte args in registers. - - * valops.c (value_fetch_lazy): Ensure that a D10V function pointer - is fetched in the correct byte order. - (value_at): Ditto. Also ensure data pointers are mapped to data - segment. - - * config/d10v/tm-d10v.h (D10V_DADDR_P, D10V_IADDR_P): - - * d10v-tdep.c: Replace 2 with REGISTER_RAW_SIZE. - (d10v_pop_frame): Replace R13 with LR_REGNUM. - (d10v_push_arguments): Replace R2 with ARG1_REGNUM. - (d10v_push_arguments): Replace 6 with ARGN_REGNUM. - (d10v_extract_return_value): Access return value with RET1_REGNUM. - - * config/d10v/tm-d10v.h (ARG1_REGNUM, ARGN_REGNUM, RET1_REGNUM): - Define. - (STORE_RETURN_VALUE): Specify return register using RET1_REGNUM. - (STORE_STRUCT_RETURN): Specify ARG1_REGNUM as the struct ptr - location. - -Thu Feb 5 13:16:36 1998 Andrew Cagney - - * blockframe.c (generic_pop_dummy_frame): Flush the frame, no - longer valid. - - * blockframe.c (generic_pop_current_frame), frames.h: New - function. - -Thu Feb 5 17:18:16 1998 Andrew Cagney - - * remote-sim.c (gdbsim_create_inferior): clear_proceed_status - before /re/starting the simulator. - -Thu Feb 5 15:55:31 1998 C. M. Heard (heard@vvnet.com) - - * top.c (do_nothing): Remove signal handler after signal is caught. - -Thu Feb 5 11:57:06 1998 Michael Snyder (msnyder@cleaver.cygnus.com) - - * tracepoint.c (tracepoint_operation): call free_actions instead - of free. (free_actions): eliminate some memory leaks for actions. - (validate_actionline): pass string arg by reference, so we can - change the pointer. Change all memrange collection arguments to - canonical form (literal address and size), to enforce early - evaluation. Accept UNOP_MEMVAL (assembly variables) for - trace collection. (parse_and_eval_memrange): accept expressions - for the address and size fields of a memrange (and evaluate - them immediately). (several places): use -1 instead of zero - to distinguish an absolute memrange from a register-relative one. - (encode_actions): add handling for UNOP_MEMVAL (assembly variable). - -Wed Feb 4 17:40:21 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * Makefile.in (SFILES): add tracepoint.c. - (LINTFILES): add @CONFIG_SRCS@. - (SOURCES): Ditto. - * configure.in (CONFIG_SRCS): Mirror use of CONFIG_OBS. - * configure: Regenerated. - -Tue Feb 3 16:12:32 1998 Gordon W. Ross (gwr@mc.com) - - * infptrace.c (child_resume): Don't try to step if - NO_SINGLE_STEP is defined. - -Mon Feb 2 19:06:13 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * Makefile.in (VERSION): Bump to 4.16.2. - -Mon Feb 2 17:18:25 1998 Richard Henderson - - * alpha-nat.c (fetch_aout_core_registers): Rename from - fetch_core_registers. - (fetch_elf_core_registers): New function. - (supply_gregset): Use ALPHA_REGSET_BASE. - (supply_fpregset): Likewise. - (fill_fpregset): Likewise. - (alpha_aout_core_fns): Rename from alpha_core_fns. - (alpha_elf_core_fns): New. - * config/alpha/alpha-linux.mh (NATDEPFILES): solib.o not osfsolib.o. - Disable MMALLOC. - * config/alpha/nm-linux.h (SVR4_SHARED_LIBS): Define if ELF. - (TARGET_ELF64): Likewise. - (ALPHA_REGSET_BASE): New. - * config/alpha/nm-osf.h (ALPHA_REGSET_BASE): New. - * config/alpha/tm-alphalinux.h: Include tm-sysv4.h. - - * solib.c (elf_locate_base): Add TARGET_ELF64 support. - (info_sharedlibary_command): Likewise. - - * configure.host: Match alpha*. - * configure.tgt: Likewise. - -Fri Jan 30 15:11:38 1998 David Taylor - - Changes by - * infrun.c (IN_SOLIB_DYNSYM_RESOLVE_CODE): new macro for detecting - whether we are in the dynamic symbol resolution code - (wait_for_inferior): invoke it. - * solib.c (in_svr4_dynsym_resolve_code): new function - (enable_break): record start and end of the dynamic linker - text and plt sections for use in in_svr4_dynsym_resolve_code. - * solib.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): add svr4 definition; - (in_svr4_dynsym_resolve_code): declare it. - * config/nm-gnu.h (solib.h): move inclusion to after definition - of SVR4_SHARED_LIBS. - * config/nm-sysv4.h (solib.h): ditto. - * config/i386/nm-i386sco5.h (solib.h): ditto. - * config/i386/nm-linux.h (solib.h): ditto. - * config/mips/nm-irix5.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): undefine. - -Thu Jan 29 19:39:31 1998 Stan Shebs - - * coffread.c (coff_symtab_read) [SEM]: Remove code, macro can - never be defined. - * dbxread.c (process_one_symbol) [BLOCK_ADDRESS_ABSOLUTE]: - Remove, no longer needed. - * hppa-tdep.c (N_SET_MAGIC): Remove, no longer used. - * config/pa/xm-hppab.h (SEEK_SET, SEEK_CUR, SEEK_END): Ditto. - * config/mips/tm-mipsm3.h (NUMERIC_REG_NAMES): Ditto. - * config/mips/mipsm3.mt (TDEPFILES): Remove mipsread.o. - -Wed Jan 28 14:46:52 1998 Stan Shebs - - Suggested by Chris Walter : - * dwarfread.c (set_cu_language): Recognize Fortran. - * dwarf2read.c (set_cu_language): Ditto. - (read_array_type): Fix language test. - -Wed Jan 28 12:51:08 1998 Michael Snyder (msnyder@cleaver.cygnus.com) - - * blockframe.c (generic_frame_chain_valid): A frame pointer may - be valid if it is equal to the frame pointer of its caller (ie. - not necessarily strictly INNER_THAN). Allows frameless functions. - -Wed Jan 28 11:23:25 1998 Mark Alexander - - * monitor.c (monitor_vsprintf): New function to handle - printing of large addresses using %A format specifier. - (monitor_printf_noecho, monitor_printf): Use monitor_vsprintf - instead of vsprintf. - * dve3900-rom.c (_initialize_r3900_rom): Use %A instead of %Lx - to print addresses. - -Tue Jan 27 16:14:23 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * configure.in (CONFIG_LDFLAGS): Only add -export-dynamic - when using GNU ld. - -Mon Jan 26 19:07:46 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * config/alpha/tm-alphalinux.h (alpha_linux_sigtramp_offset): - Add closing parenthesis. From HJ Lu. - -Mon Jan 26 17:54:45 1998 Mark Alexander - - * dve3900-rom.c: Improve performance by using memory commands - that print less fluff. Minor cosmetic changes. - Eliminate compiler warnings. - -Sat Jan 24 23:44:43 1998 Martin M. Hunt - - * breakpoint.c (enable_breakpoint): Preserve breakpoint - disposition when enabling a breakpoint. - - * symtab.c (find_pc_sect_line): If no symbol information - is found, return correct pc anyway. - -Fri Jan 23 17:26:22 1998 Stan Shebs - - * configure.host (i[3456]86-*-osf1mk*, mips-*-mach3*, - ns32k-*-mach3*): Fix file names. - (i[3456]86-*-os9k, m88*-*-mach3*, w65-*-*): Remove config - recognition, no source files for these. - * configure.tgt (powerpc-*-aix4*): Remove config, now identical - to powerpc-*-aix*. - * config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: Remove files, - no longer needed. - -Fri Jan 23 16:49:41 1998 Mark Alexander - - * monitor.c (monitor_write, monitor_readchar): New functions. - * monitor.h (monitor_write, monitor_readchar): Declare. - * dve3900-rom.c: Add support for fast loading on ethernet connections. - -Fri Jan 23 07:47:06 1998 Fred Fish - - * config/d10v/tm-d10v.h (CALL_DUMMY): Define as "{ 0 }". - (TARGET_READ_FP): Define to d10v_read_fp rather than d10v_read_sp. - (TARGET_WRITE_FP): Define to d10v_write_fp rather than d10v_write_sp. - (d10v_write_fp, d10v_read_fp): Add prototypes. - * symtab.c (decode_line_1): Remove assignment of sals[0].pc field. - * symfile.c (simple_overlay_update, simple_overlay_update_1): - Ignore the size of overlay sections. This check is redundant anyway. - * printcmd.c (print_frame_args): Ditto. - * valops.c (value_fetch_lazy): Ditto. - * values.c (unpack_long): Ditto. - * d10v-tdep.c (d10v_frame_chain, d10v_frame_find_saved_regs, - d10v_init_extra_frame_info): Fix some minor bugs so the finish command - works properly. - (show_regs): Change num1 and num2 types from "long long" to "LONGEST". - (d10v_read_fp, d10v_write_fp): New functions. - (d10v_push_arguments): Remove unneeded assigns to "val" and "contents". - (d10v_push_arguments): Fix for pointers and structs. - (d10v_extract_return_value): Fix for pointers and chars. - -Tue Jan 20 18:53:18 1998 Stan Shebs - - * configure.tgt (i386-*-mach*, m88*-*-mach3*): Remove config - recognition, no source files for these (note that the i386 Mach - config is for pre-Mach 3). - (mips*-*-mach3*, ns32k-*-mach3*): Fix file names. - * config/mips/mipsel64.mt: Remove, never referenced. - -Mon Jan 19 14:01:28 1998 Stan Shebs - - * top.c (print_gdb_version): Restore to original message. - -Mon Jan 19 13:34:40 1998 Ian Lance Taylor - - From cgf@bbc.com (Chris Faylor): - * win32-nat.c (child_mourn_inferior): Call ContinueDebugEvent to - let the child exit. - (child_kill_inferior): Respond to all debug events as the child is - terminating. - - * Makefile.in (all): Change gdb dependency to gdb$(EXEEXT). - (uninstall): Add $(EXEEXT) to file name to remove. - (gdb$(EXEEXT)): Rename target from plain gdb. - (gdb1$(EXEEXT)): Rename target from plain gdb1. - (clean, mostlyclean): Add $(EXEEXT) to binary names to remove. - -1998-01-16 Felix Lee - - * top.c (print_gdb_version): delete stutter. - -Thu Jan 15 12:29:13 1998 Nick Clifton - - * remote-rdi.c (arm_rdi_open): Patch from Tony.Thompson@arm.com - to prevent spurous error messages on non-ICE targets. - -Wed Jan 14 19:27:02 1998 Stan Shebs - - * config/mips/{r3900.mt,r3900l.mt,tm-r3900.h,tm-r3900l.h}: - Remove, no longer used. - -Wed Jan 14 18:11:26 1998 Michael Meissner - - Patch from Jim Wilson. - * d30v-tdep.c (d30v_frame_find_saved_regs_offsets): Properly - declare void function before use. - - * config/d30v/tm-d30v.h (CALL_DUMMY): Initialize as { 0 }, not {}. - -Tue Jan 13 16:38:48 1998 Fred Fish - - * configure.in (--with-mmalloc): Add new configure arg to use the - mmalloc package. Default is to not use it. - (START_INFERIOR_TRAPS_EXPECTED): Define to the integer 2, not - the string "2". - * acconfig.h (USE_MMALLOC, FORCE_MMCHECK): Add #undef. - * configure: Regenerated. - * config.in: Regenerated. - * Makefile.in (MMALLOC_DIR, MMALLOC_SRC): Remove. - (MMALLOC): Set using configure. - (MMALLOC_CFLAGS): Set using configure. - - * config/i386/tm-linux.h (sys_quotactl): Define to 1 rather - than just defining it. - * mpw-make.sed: Undefine USE_MMALLOC rather than defining NO_MMALLOC. - * utils.c (NO_MMALLOC): Use USE_MMALLOC instead. - * objfiles.c: ditto. - * defs.h: ditto. - - * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Remove. - * config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Remove. - * config/i386/cygwin32.mh (MMALLOC_CFLAGS): Remove. - * config/alpha/alpha-osf3.mh (MMALLOC_CFLAGS): Remove. - * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Remove. - * gdbserver/Makefile.in (MMALLOC_*): Remove. - * config/rs6000/rs6000.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/rs6000/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/powerpc/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/powerpc/aix.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/ns32k/ns32km3.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/mips/mipsm3.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/mips/decstation.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/m88k/cxux.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/i386/xm-windows.h (NO_MMALLOC, NO_MMCHECK): Remove. - * config/i386/i386mk.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/i386/i386m3.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/i386/i386gnu.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/alpha/alpha-osf1.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/alpha/alpha-linux.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - -Mon Jan 12 11:46:51 1998 Michael Snyder (msnyder@cleaver.cygnus.com) - - * config/m68k/tm-m68k.h (REGISTER_VIRTUAL_TYPE): make A0 thru A7 - default to void pointer type (so that their default radix is hex). - - * symtab.c: move rbreak_command from no_class to class_breakpoint - so it will be listed under "help breakpoints". - -Sat Jan 10 14:58:04 1998 Stan Shebs - - * rdi-share/hostchan.c: Remove gettimeofday declaration. - -Thu Jan 8 11:03:59 1998 Nick Clifton - - * remote-rdp.c: Applied patches submitted by Tony.Thompson@arm.com - to implement the Angel remote debugging interface. - - * Makefile.in: Add build rules for remote-rdi.c and - rdi-share/libangsd.a. - - * configure.tgt: Updated from source on branch. - * config/arm/tm-arm.h: Updated from source on branch. - * arm-tdep.c: Updated from source on branch. - - * rdi-share: New directory, RDI library contributed by ARM. - -Mon Jan 5 20:21:59 1998 Mark Alexander - - * monitor.h (MO_PRINT_PROGRAM_OUTPUT): Define. - * monitor.c (monitor_wait): Echo program output. - * dve3900-rom.c (_initialize_r3900_rom): Remove MO_HANDLE_NL flag, - add MO_PRINT_PROGRAM_OUTPUT flag. - -Mon Jan 5 18:21:11 1998 David Taylor - - * top.h (HAVE_SIGSETJMP): define SIGJMP_BUF, SIGSETJMP, and - SIGLONGJMP appropriately based on whether HAVE_SIGSETJMP is - defined. - * top.c (return_to_top_level, catch_errors): use the new macros - * main.c (SET_TOP_LEVEL): ditto. - * config/xm-sysv4.h (HAVE_SIGSETJMP): Define. - -Fri Jan 2 18:48:58 1998 Mark Alexander - - * configure.in: Double up brackets in shell case pattern. - -Fri Jan 2 17:06:05 1998 Michael Snyder (msnyder@cleaver.cygnus.com) - - * tracepoint.c (finish_tfind_command): improved algorithm for - deciding when we've "stepped" into a new stack frame. - (map_args_over_tracepoints): loop over tracepoint list "safely", - since list elements may be deleted during loop. - (read_actions): add actions to history list. - -For older changes see ChangeLog-97 - -Local Variables: -mode: change-log -left-margin: 8 -fill-column: 74 -version-control: never -End: Mon Aug 31 15:42:10 1998 Tom Tromey * top.c (context_hook): Define. -- 2.30.2