From 40e0b27177e747600d3ec186458fe0e482a1cf77 Mon Sep 17 00:00:00 2001 From: Pedro Alves Date: Mon, 24 Aug 2015 15:40:26 +0100 Subject: [PATCH] Delete the remaining ROM monitor targets Ref: https://sourceware.org/ml/gdb/2015-07/msg00011.html All of these targets use gdb/monitor.c, which has bit rotted years ago (I'd guess around ~6), and nobody seems to have noticed: | target | source | |----------------+----------------------| | target dbug | gdb/dbug-rom.c | | target picobug | gdb/microblaze-rom.c | | target dink32 | gdb/dink32-rom.c | | target m32r | gdb/m32r-rom.c | | target mon2000 | gdb/m32r-rom.c | | target ppcbug | gdb/ppcbug-rom.c | This deletes them, along with finally removing monitor.c. A manual update will be done separately. gdb/ChangeLog: 2015-08-24 Pedro Alves * NEWS: Mention removed support for the various ROM monitors. * Makefile.in (ALL_TARGET_OBS): Remove dbug-rom.o, dink32-rom.o, ppcbug-rom.o, m32r-rom.o, dsrec.o and monitor.o from gdb_target_obs. * configure.tgt (h8300-*-*): Remove monitor.o and m32r-rom.o from gdb_target_obs. (m68*-*-*): Remove monitor.o dbug-rom.o and dsrec.o from gdb_target_obs. (microblaze*-linux-*): Remove microblaze-rom.o, monitor.o and dsrec.o from gdb_target_obs. (microblaze*-*-*): Remove microblaze-rom.o, monitor.o and dsrec.o from gdb_target_obs. (powerpc-*-lynx*178): Remove monitor.o and dsrec.o from gdb_target_obs. (powerpc*-*-*): Remove monitor.o, dsrec.o, ppcbug-rom.o and dink32-rom.o from gdb_target_obs. (sh*-*-linux*): Remove monitor.o and dsrec.o from gdb_target_obs. (sh*): Remove monitor.o and dsrec.o from gdb_target_obs. * dbug-rom.c, dink32-rom.c, dsrec.c, m32r-rom.c, microblaze-rom.c, monitor.c, monitor.h, ppcbug-rom.c, srec.h: Delete files. --- gdb/ChangeLog | 22 + gdb/Makefile.in | 3 +- gdb/NEWS | 9 + gdb/configure.tgt | 30 +- gdb/dbug-rom.c | 176 --- gdb/dink32-rom.c | 179 ---- gdb/dsrec.c | 316 ------ gdb/m32r-rom.c | 634 ----------- gdb/microblaze-rom.c | 192 ---- gdb/monitor.c | 2417 ------------------------------------------ gdb/monitor.h | 261 ----- gdb/ppcbug-rom.c | 224 ---- gdb/srec.h | 35 - 13 files changed, 46 insertions(+), 4452 deletions(-) delete mode 100644 gdb/dbug-rom.c delete mode 100644 gdb/dink32-rom.c delete mode 100644 gdb/dsrec.c delete mode 100644 gdb/m32r-rom.c delete mode 100644 gdb/microblaze-rom.c delete mode 100644 gdb/monitor.c delete mode 100644 gdb/monitor.h delete mode 100644 gdb/ppcbug-rom.c delete mode 100644 gdb/srec.h diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 94bb7a515d0..ee9783aa6e1 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,25 @@ +2015-08-24 Pedro Alves + + * NEWS: Mention removed support for the various ROM monitors. + * Makefile.in (ALL_TARGET_OBS): Remove dbug-rom.o, dink32-rom.o, + ppcbug-rom.o, m32r-rom.o, dsrec.o and monitor.o from gdb_target_obs. + * configure.tgt (h8300-*-*): Remove monitor.o and m32r-rom.o from + gdb_target_obs. + (m68*-*-*): Remove monitor.o dbug-rom.o and dsrec.o from + gdb_target_obs. + (microblaze*-linux-*): Remove microblaze-rom.o, monitor.o and + dsrec.o from gdb_target_obs. + (microblaze*-*-*): Remove microblaze-rom.o, monitor.o and dsrec.o + from gdb_target_obs. + (powerpc-*-lynx*178): Remove monitor.o and dsrec.o from + gdb_target_obs. + (powerpc*-*-*): Remove monitor.o, dsrec.o, ppcbug-rom.o and + dink32-rom.o from gdb_target_obs. + (sh*-*-linux*): Remove monitor.o and dsrec.o from gdb_target_obs. + (sh*): Remove monitor.o and dsrec.o from gdb_target_obs. + * dbug-rom.c, dink32-rom.c, dsrec.c, m32r-rom.c, microblaze-rom.c, + monitor.c, monitor.h, ppcbug-rom.c, srec.h: Delete files. + 2015-08-21 Pedro Alves * frame.c (null_frame_id): Explicitly zero-initialize. diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 13b9041af2d..398ef6acd39 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -715,7 +715,6 @@ ALL_TARGET_OBS = \ sol2-tdep.o \ solib-frv.o solib-svr4.o \ solib-darwin.o solib-dsbt.o \ - dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \ remote-m32r-sdi.o remote-mips.o \ xcoffread.o \ symfile-mem.o \ @@ -945,7 +944,7 @@ complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \ common/gdb_wait.h common/gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \ interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \ amd64-linux-tdep.h linespec.h location.h i387-tdep.h mn10300-tdep.h \ -sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h \ +sparc64-tdep.h ppcobsd-tdep.h \ coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \ m68k-tdep.h spu-tdep.h jv-lang.h environ.h amd64-tdep.h \ doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h ppc64-tdep.h \ diff --git a/gdb/NEWS b/gdb/NEWS index 2cedccd336b..9edfd5e1bdf 100644 --- a/gdb/NEWS +++ b/gdb/NEWS @@ -35,6 +35,15 @@ show debug bfd-cache The "/m" option is now considered deprecated: its "source-centric" output hasn't proved useful in practice. +* Support for various ROM monitors has been removed: + + target dbug dBUG ROM monitor for Motorola ColdFire + target picobug Motorola picobug monitor + target dink32 DINK32 ROM monitor for PowerPC + target m32r Renesas M32R/D ROM monitor + target mon2000 mon2000 ROM monitor + target ppcbug PPCBUG ROM monitor for PowerPC + *** Changes in GDB 7.10 * Support for process record-replay and reverse debugging on aarch64*-linux* diff --git a/gdb/configure.tgt b/gdb/configure.tgt index f2c1a2d8bda..c42b4dff103 100644 --- a/gdb/configure.tgt +++ b/gdb/configure.tgt @@ -147,8 +147,8 @@ moxie-*-elf | moxie-*-moxiebox | moxie-*-rtems*) ;; h8300-*-*) - # Target: H8300 with HMS monitor and H8 simulator - gdb_target_obs="h8300-tdep.o monitor.o dsrec.o" + # Target: H8300 processor + gdb_target_obs="h8300-tdep.o" gdb_sim=../sim/h8300/libsim.a ;; @@ -289,8 +289,7 @@ m32r*-*-linux*) ;; m32r*-*-*) # Target: Renesas m32r processor - gdb_target_obs="m32r-tdep.o monitor.o m32r-rom.o dsrec.o \ - remote-m32r-sdi.o" + gdb_target_obs="m32r-tdep.o remote-m32r-sdi.o" gdb_sim=../sim/m32r/libsim.a ;; @@ -302,8 +301,8 @@ m68hc11*-*-*|m6811*-*-*) m68*-*-aout* | m68*-*-coff* | m68*-*-elf* | m68*-*-rtems* | m68*-*-uclinux* | \ fido-*-elf*) - # Target: Motorola m68k embedded (e.g. bug monitors) - gdb_target_obs="m68k-tdep.o monitor.o dbug-rom.o dsrec.o" + # Target: Motorola m68k embedded + gdb_target_obs="m68k-tdep.o" ;; m68*-*-linux*) # Target: Motorola m68k with a.out and ELF @@ -333,13 +332,13 @@ mep-*-*) microblaze*-linux-*|microblaze*-*-linux*) # Target: Xilinx MicroBlaze running Linux - gdb_target_obs="microblaze-tdep.o microblaze-linux-tdep.o microblaze-rom.o \ - monitor.o dsrec.o solib-svr4.o symfile-mem.o linux-tdep.o" + gdb_target_obs="microblaze-tdep.o microblaze-linux-tdep.o solib-svr4.o \ + symfile-mem.o linux-tdep.o" gdb_sim=../sim/microblaze/libsim.a ;; microblaze*-*-*) # Target: Xilinx MicroBlaze running standalone - gdb_target_obs="microblaze-tdep.o microblaze-rom.o monitor.o dsrec.o" + gdb_target_obs="microblaze-tdep.o" gdb_sim=../sim/microblaze/libsim.a ;; @@ -442,13 +441,12 @@ powerpc*-*-linux*) powerpc-*-lynx*178) # Target: PowerPC running Lynx178. gdb_target_obs="rs6000-tdep.o rs6000-lynx178-tdep.o \ - xcoffread.o monitor.o dsrec.o ppc-sysv-tdep.o \ + xcoffread.o ppc-sysv-tdep.o \ ravenscar-thread.o ppc-ravenscar-thread.o" ;; powerpc*-*-*) # Target: PowerPC running eabi - gdb_target_obs="rs6000-tdep.o monitor.o dsrec.o ppcbug-rom.o \ - dink32-rom.o ppc-sysv-tdep.o solib-svr4.o \ + gdb_target_obs="rs6000-tdep.o ppc-sysv-tdep.o solib-svr4.o \ ravenscar-thread.o ppc-ravenscar-thread.o" if test -f ../sim/ppc/Makefile; then gdb_sim=../sim/ppc/libsim.a @@ -484,8 +482,8 @@ score-*-*) sh*-*-linux*) # Target: GNU/Linux Super-H - gdb_target_obs="sh-tdep.o sh64-tdep.o sh-linux-tdep.o monitor.o \ - dsrec.o solib-svr4.o symfile-mem.o \ + gdb_target_obs="sh-tdep.o sh64-tdep.o sh-linux-tdep.o \ + solib-svr4.o symfile-mem.o \ glibc-tdep.o linux-tdep.o" gdb_sim=../sim/sh/libsim.a build_gdbserver=yes @@ -505,8 +503,8 @@ sh64-*-elf*) gdb_sim=../sim/sh64/libsim.a ;; sh*) - # Target: Embedded Renesas Super-H with ICE and simulator - gdb_target_obs="sh-tdep.o sh64-tdep.o monitor.o dsrec.o" + # Target: Embedded Renesas Super-H processor + gdb_target_obs="sh-tdep.o sh64-tdep.o" gdb_sim=../sim/sh/libsim.a ;; diff --git a/gdb/dbug-rom.c b/gdb/dbug-rom.c deleted file mode 100644 index f771e1ca132..00000000000 --- a/gdb/dbug-rom.c +++ /dev/null @@ -1,176 +0,0 @@ -/* Remote debugging interface to dBUG ROM monitor for GDB, the GNU debugger. - Copyright (C) 1996-2015 Free Software Foundation, Inc. - - Written by Stan Shebs of Cygnus Support. - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . */ - -/* dBUG is a monitor supplied on various Motorola boards, including - m68k, ColdFire, and PowerPC-based designs. The code here assumes - the ColdFire, and (as of 9/25/96) has only been tested with a - ColdFire IDP board. */ - -#include "defs.h" -#include "gdbcore.h" -#include "target.h" -#include "monitor.h" -#include "serial.h" -#include "regcache.h" - -#include "m68k-tdep.h" - -static void -dbug_supply_register (struct regcache *regcache, char *regname, - int regnamelen, char *val, int vallen) -{ - int regno; - struct gdbarch *gdbarch = get_regcache_arch (regcache); - - if (regnamelen != 2) - return; - - switch (regname[0]) - { - case 'S': - if (regname[1] != 'R') - return; - regno = gdbarch_ps_regnum (gdbarch); - break; - case 'P': - if (regname[1] != 'C') - return; - regno = gdbarch_pc_regnum (gdbarch); - break; - case 'D': - if (regname[1] < '0' || regname[1] > '7') - return; - regno = regname[1] - '0' + M68K_D0_REGNUM; - break; - case 'A': - if (regname[1] < '0' || regname[1] > '7') - return; - regno = regname[1] - '0' + M68K_A0_REGNUM; - break; - default: - return; - } - - monitor_supply_register (regcache, regno, val); -} - -/* This array of registers needs to match the indexes used by GDB. - The whole reason this exists is because the various ROM monitors - use different names than GDB does, and don't support all the - registers either. So, typing "info reg sp" becomes an "A7". */ - -static const char * -dbug_regname (int index) -{ - static char *regnames[] = - { - "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7", - "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", - "SR", "PC" - /* no float registers */ - }; - - if (index >= ARRAY_SIZE (regnames) || index < 0) - return NULL; - else - return regnames[index]; - -} - -static struct target_ops dbug_ops; -static struct monitor_ops dbug_cmds; - -static char *dbug_inits[] = -{"\r", NULL}; - - -static void -init_dbug_cmds (void) -{ - dbug_cmds.flags = MO_CLR_BREAK_USES_ADDR - | MO_GETMEM_NEEDS_RANGE | MO_FILL_USES_ADDR; - dbug_cmds.init = dbug_inits; /* Init strings */ - dbug_cmds.cont = "go\r"; /* continue command */ - dbug_cmds.step = "trace\r"; /* single step */ - dbug_cmds.stop = NULL; /* interrupt command */ - dbug_cmds.set_break = "br %x\r"; /* set a breakpoint */ - dbug_cmds.clr_break = "br -r %x\r"; /* clear a breakpoint */ - dbug_cmds.clr_all_break = "br -r\r"; /* clear all breakpoints */ - dbug_cmds.fill = "bf.b %x %x %x\r"; /* fill (start end val) */ - dbug_cmds.setmem.cmdb = "mm.b %x %x\r"; /* setmem.cmdb (addr, value) */ - dbug_cmds.setmem.cmdw = "mm.w %x %x\r"; /* setmem.cmdw (addr, value) */ - dbug_cmds.setmem.cmdl = "mm.l %x %x\r"; /* setmem.cmdl (addr, value) */ - dbug_cmds.setmem.cmdll = NULL; /* setmem.cmdll (addr, value) */ - dbug_cmds.setmem.resp_delim = NULL; /* setmem.resp_delim */ - dbug_cmds.setmem.term = NULL; /* setmem.term */ - dbug_cmds.setmem.term_cmd = NULL; /* setmem.term_cmd */ - dbug_cmds.getmem.cmdb = "md.b %x %x\r"; /* getmem.cmdb (addr, addr2) */ - dbug_cmds.getmem.cmdw = "md.w %x %x\r"; /* getmem.cmdw (addr, addr2) */ - dbug_cmds.getmem.cmdl = "md.l %x %x\r"; /* getmem.cmdl (addr, addr2) */ - dbug_cmds.getmem.cmdll = NULL; /* getmem.cmdll (addr, addr2) */ - dbug_cmds.getmem.resp_delim = ":"; /* getmem.resp_delim */ - dbug_cmds.getmem.term = NULL; /* getmem.term */ - dbug_cmds.getmem.term_cmd = NULL; /* getmem.term_cmd */ - dbug_cmds.setreg.cmd = "rm %s %x\r"; /* setreg.cmd (name, value) */ - dbug_cmds.setreg.resp_delim = NULL; /* setreg.resp_delim */ - dbug_cmds.setreg.term = NULL; /* setreg.term */ - dbug_cmds.setreg.term_cmd = NULL; /* setreg.term_cmd */ - dbug_cmds.getreg.cmd = "rd %s\r"; /* getreg.cmd (name) */ - dbug_cmds.getreg.resp_delim = ":"; /* getreg.resp_delim */ - dbug_cmds.getreg.term = NULL; /* getreg.term */ - dbug_cmds.getreg.term_cmd = NULL; /* getreg.term_cmd */ - dbug_cmds.dump_registers = "rd\r"; /* dump_registers */ - /* register_pattern */ - dbug_cmds.register_pattern = "\\(\\w+\\) +:\\([0-9a-fA-F]+\\b\\)"; - dbug_cmds.supply_register = dbug_supply_register; - dbug_cmds.load = "dl\r"; /* download command */ - dbug_cmds.loadresp = "\n"; /* load response */ - dbug_cmds.prompt = "dBUG>"; /* monitor command prompt */ - dbug_cmds.line_term = "\r"; /* end-of-line terminator */ - dbug_cmds.cmd_end = NULL; /* optional command terminator */ - dbug_cmds.target = &dbug_ops; /* target operations */ - dbug_cmds.stopbits = SERIAL_1_STOPBITS; /* number of stop bits */ - dbug_cmds.regnames = NULL; /* registers names */ - dbug_cmds.regname = dbug_regname; - dbug_cmds.magic = MONITOR_OPS_MAGIC; /* magic */ -} /* init_debug_ops */ - -static void -dbug_open (const char *args, int from_tty) -{ - monitor_open (args, &dbug_cmds, from_tty); -} - -extern initialize_file_ftype _initialize_dbug_rom; /* -Wmissing-prototypes */ - -void -_initialize_dbug_rom (void) -{ - init_dbug_cmds (); - init_monitor_ops (&dbug_ops); - - dbug_ops.to_shortname = "dbug"; - dbug_ops.to_longname = "dBUG monitor"; - dbug_ops.to_doc = "Debug via the dBUG monitor.\n\ -Specify the serial device it is connected to (e.g. /dev/ttya)."; - dbug_ops.to_open = dbug_open; - - add_target (&dbug_ops); -} diff --git a/gdb/dink32-rom.c b/gdb/dink32-rom.c deleted file mode 100644 index 39fa9561cd8..00000000000 --- a/gdb/dink32-rom.c +++ /dev/null @@ -1,179 +0,0 @@ -/* Remote debugging interface for DINK32 (PowerPC) ROM monitor for - GDB, the GNU debugger. - Copyright (C) 1997-2015 Free Software Foundation, Inc. - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . */ - -#include "defs.h" -#include "gdbcore.h" -#include "target.h" -#include "monitor.h" -#include "serial.h" -#include "symfile.h" /* For generic_load() */ -#include "inferior.h" -#include "regcache.h" - -static void -dink32_supply_register (struct regcache *regcache, char *regname, - int regnamelen, char *val, int vallen) -{ - int regno = 0; - - if (regnamelen < 2 || regnamelen > 4) - return; - - switch (regname[0]) - { - case 'R': - if (regname[1] < '0' || regname[1] > '9') - return; - if (regnamelen == 2) - regno = regname[1] - '0'; - else if (regnamelen == 3 && regname[2] >= '0' && regname[2] <= '9') - regno = (regname[1] - '0') * 10 + (regname[2] - '0'); - else - return; - break; - case 'F': - if (regname[1] != 'R' || regname[2] < '0' || regname[2] > '9') - return; - if (regnamelen == 3) - regno = 32 + regname[2] - '0'; - else if (regnamelen == 4 && regname[3] >= '0' && regname[3] <= '9') - regno = 32 + (regname[2] - '0') * 10 + (regname[3] - '0'); - else - return; - break; - case 'I': - if (regnamelen != 2 || regname[1] != 'P') - return; - regno = 64; - break; - case 'M': - if (regnamelen != 3 || regname[1] != 'S' || regname[2] != 'R') - return; - regno = 65; - break; - case 'C': - if (regnamelen != 2 || regname[1] != 'R') - return; - regno = 66; - break; - case 'S': - if (regnamelen != 4 || regname[1] != 'P' || regname[2] != 'R') - return; - else if (regname[3] == '8') - regno = 67; - else if (regname[3] == '9') - regno = 68; - else if (regname[3] == '1') - regno = 69; - else if (regname[3] == '0') - regno = 70; - else - return; - break; - default: - return; - } - - monitor_supply_register (regcache, regno, val); -} - -/* This array of registers needs to match the indexes used by GDB. - The whole reason this exists is because the various ROM monitors - use different names than GDB does, and don't support all the - registers either. */ - -static char *dink32_regnames[] = -{ - "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", - "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", - "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", - "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31", - - "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", - "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", - "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", - "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31", - - "srr0", "msr", "cr", "lr", "ctr", "xer", "xer" -}; - -static struct target_ops dink32_ops; - -static char *dink32_inits[] = -{"\r", NULL}; - -static struct monitor_ops dink32_cmds; - -static void -dink32_open (const char *args, int from_tty) -{ - monitor_open (args, &dink32_cmds, from_tty); -} - -extern initialize_file_ftype _initialize_dink32_rom; /* -Wmissing-prototypes */ - -void -_initialize_dink32_rom (void) -{ - dink32_cmds.flags = MO_HEX_PREFIX | MO_GETMEM_NEEDS_RANGE - | MO_FILL_USES_ADDR | MO_HANDLE_NL | MO_32_REGS_PAIRED - | MO_SETREG_INTERACTIVE | MO_SETMEM_INTERACTIVE - | MO_GETMEM_16_BOUNDARY | MO_CLR_BREAK_1_BASED | MO_SREC_ACK - | MO_SREC_ACK_ROTATE; - dink32_cmds.init = dink32_inits; - dink32_cmds.cont = "go +\r"; - dink32_cmds.step = "tr +\r"; - dink32_cmds.set_break = "bp 0x%x\r"; - dink32_cmds.clr_break = "bp %d\r"; -#if 0 /* Would need to follow strict alignment rules.. */ - dink32_cmds.fill = "mf %x %x %x\r"; -#endif - dink32_cmds.setmem.cmdb = "mm -b %x\r"; - dink32_cmds.setmem.cmdw = "mm -w %x\r"; - dink32_cmds.setmem.cmdl = "mm %x\r"; - dink32_cmds.setmem.term = " ? "; - dink32_cmds.getmem.cmdb = "md %x\r"; - dink32_cmds.getmem.resp_delim = " "; - dink32_cmds.setreg.cmd = "rm %s\r"; - dink32_cmds.setreg.term = " ? "; - dink32_cmds.getreg.cmd = "rd %s\r"; - dink32_cmds.getreg.resp_delim = ": "; - dink32_cmds.dump_registers = "rd r\r"; - dink32_cmds.register_pattern = "\\(\\w+\\) +=\\([0-9a-fA-F]+\\b\\)"; - dink32_cmds.supply_register = dink32_supply_register; - /* S-record download, via "keyboard port". */ - dink32_cmds.load = "dl -k\r"; - dink32_cmds.loadresp = "Set Input Port : set to Keyboard Port\r"; - dink32_cmds.prompt = "DINK32_603 >>"; - dink32_cmds.line_term = "\r"; - dink32_cmds.target = &dink32_ops; - dink32_cmds.stopbits = SERIAL_1_STOPBITS; - dink32_cmds.regnames = dink32_regnames; - dink32_cmds.magic = MONITOR_OPS_MAGIC; - - init_monitor_ops (&dink32_ops); - - dink32_ops.to_shortname = "dink32"; - dink32_ops.to_longname = "DINK32 monitor"; - dink32_ops.to_doc = "Debug using the DINK32 monitor.\n\ -Specify the serial device it is connected to (e.g. /dev/ttya)."; - dink32_ops.to_open = dink32_open; - - add_target (&dink32_ops); -} diff --git a/gdb/dsrec.c b/gdb/dsrec.c deleted file mode 100644 index 82cc9682bc1..00000000000 --- a/gdb/dsrec.c +++ /dev/null @@ -1,316 +0,0 @@ -/* S-record download support for GDB, the GNU debugger. - Copyright (C) 1995-2015 Free Software Foundation, Inc. - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . */ - -#include "defs.h" -#include "serial.h" -#include "srec.h" -#include -#include -#include "gdb_bfd.h" - -extern int remote_debug; - -static int make_srec (char *srec, CORE_ADDR targ_addr, bfd * abfd, - asection * sect, int sectoff, int *maxrecsize, - int flags); - -/* Download an executable by converting it to S records. DESC is a - `struct serial *' to send the data to. FILE is the name of the - file to be loaded. LOAD_OFFSET is the offset into memory to load - data into. It is usually specified by the user and is useful with - the a.out file format. MAXRECSIZE is the length in chars of the - largest S-record the host can accomodate. This is measured from - the starting `S' to the last char of the checksum. FLAGS is - various random flags, and HASHMARK is non-zero to cause a `#' to be - printed out for each record loaded. WAITACK, if non-NULL, is a - function that waits for an acknowledgement after each S-record, and - returns non-zero if the ack is read correctly. */ - -void -load_srec (struct serial *desc, const char *file, bfd_vma load_offset, - int maxrecsize, - int flags, int hashmark, int (*waitack) (void)) -{ - bfd *abfd; - asection *s; - char *srec; - int i; - int reclen; - struct timeval start_time, end_time; - unsigned long data_count = 0; - struct cleanup *cleanup; - - srec = (char *) alloca (maxrecsize + 1); - - abfd = gdb_bfd_open (file, NULL, -1); - if (!abfd) - { - printf_filtered (_("Unable to open file %s\n"), file); - return; - } - - cleanup = make_cleanup_bfd_unref (abfd); - if (bfd_check_format (abfd, bfd_object) == 0) - { - printf_filtered (_("File is not an object file\n")); - do_cleanups (cleanup); - return; - } - - gettimeofday (&start_time, NULL); - - /* Write a type 0 header record. no data for a type 0, and there - is no data, so len is 0. */ - - reclen = maxrecsize; - make_srec (srec, 0, NULL, (asection *) 1, 0, &reclen, flags); - if (remote_debug) - { - srec[reclen] = '\0'; - puts_debug ("sent -->", srec, "<--"); - } - serial_write (desc, srec, reclen); - - for (s = abfd->sections; s; s = s->next) - if (s->flags & SEC_LOAD) - { - int numbytes; - - bfd_vma addr = bfd_get_section_vma (abfd, s) + load_offset; - bfd_size_type size = bfd_get_section_size (s); - char *section_name = (char *) bfd_get_section_name (abfd, s); - /* Both GDB and BFD have mechanisms for printing addresses. - In the below, GDB's is used so that the address is - consistent with the rest of GDB. BFD's printf_vma() could - have also been used. cagney 1999-09-01 */ - printf_filtered ("%s\t: %s .. %s ", - section_name, - paddress (target_gdbarch (), addr), - paddress (target_gdbarch (), addr + size)); - gdb_flush (gdb_stdout); - - data_count += size; - - for (i = 0; i < size; i += numbytes) - { - reclen = maxrecsize; - numbytes = make_srec (srec, (CORE_ADDR) (addr + i), abfd, s, - i, &reclen, flags); - - if (remote_debug) - { - srec[reclen] = '\0'; - puts_debug ("sent -->", srec, "<--"); - } - - /* Repeatedly send the S-record until a good - acknowledgement is sent back. */ - do - { - serial_write (desc, srec, reclen); - if (deprecated_ui_load_progress_hook) - if (deprecated_ui_load_progress_hook (section_name, - (unsigned long) i)) - error (_("Canceled the download")); - } - while (waitack != NULL && !waitack ()); - - if (hashmark) - { - putchar_unfiltered ('#'); - gdb_flush (gdb_stdout); - } - } /* Per-packet (or S-record) loop. */ - - if (deprecated_ui_load_progress_hook) - if (deprecated_ui_load_progress_hook (section_name, - (unsigned long) i)) - error (_("Canceled the download")); - putchar_unfiltered ('\n'); - } - - if (hashmark) - putchar_unfiltered ('\n'); - - gettimeofday (&end_time, NULL); - - /* Write a terminator record. */ - - reclen = maxrecsize; - make_srec (srec, abfd->start_address, NULL, NULL, 0, &reclen, flags); - - if (remote_debug) - { - srec[reclen] = '\0'; - puts_debug ("sent -->", srec, "<--"); - } - - serial_write (desc, srec, reclen); - - /* Some monitors need these to wake up properly. (Which ones? -sts) */ - serial_write (desc, "\r\r", 2); - if (remote_debug) - puts_debug ("sent -->", "\r\r", "<---"); - - serial_flush_input (desc); - - print_transfer_performance (gdb_stdout, data_count, 0, - &start_time, &end_time); - do_cleanups (cleanup); -} - -/* - * make_srec -- make an srecord. This writes each line, one at a - * time, each with it's own header and trailer line. - * An srecord looks like this: - * - * byte count-+ address - * start ---+ | | data +- checksum - * | | | | - * S01000006F6B692D746573742E73726563E4 - * S315000448600000000000000000FC00005900000000E9 - * S31A0004000023C1400037DE00F023604000377B009020825000348D - * S30B0004485A0000000000004E - * S70500040000F6 - * - * S
- * - * Where - * - length - * is the number of bytes following upto the checksum. Note - * that this is not the number of chars following, since it - * takes two chars to represent a byte. - * - type - * is one of: - * 0) header record - * 1) two byte address data record - * 2) three byte address data record - * 3) four byte address data record - * 7) four byte address termination record - * 8) three byte address termination record - * 9) two byte address termination record - * - * - address - * is the start address of the data following, or in the case of - * a termination record, the start address of the image - * - data - * is the data. - * - checksum - * is the sum of all the raw byte data in the record, from the length - * upwards, modulo 256 and subtracted from 255. - * - * This routine returns the length of the S-record. - * - */ - -static int -make_srec (char *srec, CORE_ADDR targ_addr, bfd *abfd, asection *sect, - int sectoff, int *maxrecsize, int flags) -{ - unsigned char checksum; - int tmp; - static const char hextab[] = "0123456789ABCDEF"; - static const char data_code_table[] = "123"; - static const char term_code_table[] = "987"; - static const char header_code_table[] = "000"; - char const *code_table; - int addr_size; - int payload_size; - char *binbuf; - char *p; - - if (sect) - { - tmp = flags; /* Data or header record */ - code_table = abfd ? data_code_table : header_code_table; - binbuf = alloca (*maxrecsize / 2); - } - else - { - tmp = flags >> SREC_TERM_SHIFT; /* Term record */ - code_table = term_code_table; - binbuf = NULL; - } - - if ((tmp & SREC_2_BYTE_ADDR) && (targ_addr <= 0xffff)) - addr_size = 2; - else if ((tmp & SREC_3_BYTE_ADDR) && (targ_addr <= 0xffffff)) - addr_size = 3; - else if (tmp & SREC_4_BYTE_ADDR) - addr_size = 4; - else - internal_error (__FILE__, __LINE__, - _("make_srec: Bad address (%s), or bad flags (0x%x)."), - paddress (target_gdbarch (), targ_addr), flags); - - /* Now that we know the address size, we can figure out how much - data this record can hold. */ - - if (sect && abfd) - { - payload_size = (*maxrecsize - (1 + 1 + 2 + addr_size * 2 + 2)) / 2; - payload_size = min (payload_size, bfd_get_section_size (sect) - sectoff); - - bfd_get_section_contents (abfd, sect, binbuf, sectoff, payload_size); - } - else - payload_size = 0; /* Term or header packets have no payload. */ - - /* Output the header. */ - snprintf (srec, (*maxrecsize) + 1, "S%c%02X%0*X", - code_table[addr_size - 2], - addr_size + payload_size + 1, - addr_size * 2, (int) targ_addr); - - /* Note that the checksum is calculated on the raw data, not the - hexified data. It includes the length, address and the data - portions of the packet. */ - - checksum = 0; - - checksum += (payload_size + addr_size + 1 /* Packet length */ - + (targ_addr & 0xff) /* Address... */ - + ((targ_addr >> 8) & 0xff) - + ((targ_addr >> 16) & 0xff) - + ((targ_addr >> 24) & 0xff)); - - /* NOTE: cagney/2003-08-10: The equation is old. Check that the - recent snprintf changes match that equation. */ - gdb_assert (strlen (srec) == 1 + 1 + 2 + addr_size * 2); - p = srec + 1 + 1 + 2 + addr_size * 2; - - /* Build the Srecord. */ - for (tmp = 0; tmp < payload_size; tmp++) - { - unsigned char k; - - k = binbuf[tmp]; - *p++ = hextab[k >> 4]; - *p++ = hextab[k & 0xf]; - checksum += k; - } - - checksum = ~checksum; - - *p++ = hextab[checksum >> 4]; - *p++ = hextab[checksum & 0xf]; - *p++ = '\r'; - - *maxrecsize = p - srec; - return payload_size; -} diff --git a/gdb/m32r-rom.c b/gdb/m32r-rom.c deleted file mode 100644 index a2ac53795a6..00000000000 --- a/gdb/m32r-rom.c +++ /dev/null @@ -1,634 +0,0 @@ -/* Remote debugging interface to m32r and mon2000 ROM monitors for GDB, - the GNU debugger. - - Copyright (C) 1996-2015 Free Software Foundation, Inc. - - Adapted by Michael Snyder of Cygnus Support. - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . */ - -/* This module defines communication with the Renesas m32r monitor. */ - -#include "defs.h" -#include "gdbcore.h" -#include "target.h" -#include "monitor.h" -#include "serial.h" -#include "symtab.h" -#include "command.h" -#include "gdbcmd.h" -#include "symfile.h" /* for generic load */ -#include -#include /* for time_t */ -#include "objfiles.h" /* for ALL_OBJFILES etc. */ -#include "inferior.h" -#include -#include "regcache.h" -#include "gdb_bfd.h" -#include "cli/cli-utils.h" - -/* - * All this stuff just to get my host computer's IP address! - */ -#ifdef __MINGW32__ -#include -#else -#include -#include /* for hostent */ -#include /* for struct in_addr */ -#if 1 -#include /* for inet_ntoa */ -#endif -#endif - -static char *board_addr; /* user-settable IP address for M32R-EVA */ -static char *server_addr; /* user-settable IP address for gdb host */ -static char *download_path; /* user-settable path for SREC files */ - - -/* REGNUM */ -#define PSW_REGNUM 16 -#define SPI_REGNUM 18 -#define SPU_REGNUM 19 -#define ACCL_REGNUM 22 -#define ACCH_REGNUM 23 - - -/* - * Function: m32r_load_1 (helper function) - */ - -static void -m32r_load_section (bfd *abfd, asection *s, void *obj) -{ - unsigned int *data_count = obj; - if (s->flags & SEC_LOAD) - { - int addr_size = gdbarch_addr_bit (target_gdbarch ()) / 8; - bfd_size_type section_size = bfd_section_size (abfd, s); - bfd_vma section_base = bfd_section_lma (abfd, s); - unsigned int buffer, i; - - *data_count += section_size; - - printf_filtered ("Loading section %s, size 0x%lx lma ", - bfd_section_name (abfd, s), - (unsigned long) section_size); - fputs_filtered (paddress (target_gdbarch (), section_base), gdb_stdout); - printf_filtered ("\n"); - gdb_flush (gdb_stdout); - monitor_printf ("%s mw\r", phex_nz (section_base, addr_size)); - for (i = 0; i < section_size; i += 4) - { - QUIT; - monitor_expect (" -> ", NULL, 0); - bfd_get_section_contents (abfd, s, (char *) &buffer, i, 4); - monitor_printf ("%x\n", buffer); - } - monitor_expect (" -> ", NULL, 0); - monitor_printf ("q\n"); - monitor_expect_prompt (NULL, 0); - } -} - -static int -m32r_load_1 (void *dummy) -{ - int data_count = 0; - - bfd_map_over_sections ((bfd *) dummy, m32r_load_section, &data_count); - return data_count; -} - -/* - * Function: m32r_load (an alternate way to load) - */ - -static void -m32r_load (char *filename, int from_tty) -{ - bfd *abfd; - unsigned int data_count = 0; - struct timeval start_time, end_time; - struct cleanup *cleanup; - - if (filename == NULL || filename[0] == 0) - filename = get_exec_file (1); - - abfd = gdb_bfd_open (filename, NULL, -1); - if (!abfd) - error (_("Unable to open file %s."), filename); - cleanup = make_cleanup_bfd_unref (abfd); - if (bfd_check_format (abfd, bfd_object) == 0) - error (_("File is not an object file.")); - gettimeofday (&start_time, NULL); -#if 0 - for (s = abfd->sections; s; s = s->next) - if (s->flags & SEC_LOAD) - { - bfd_size_type section_size = bfd_section_size (abfd, s); - bfd_vma section_base = bfd_section_vma (abfd, s); - unsigned int buffer; - - data_count += section_size; - - printf_filtered ("Loading section %s, size 0x%lx vma ", - bfd_section_name (abfd, s), section_size); - fputs_filtered (paddress (target_gdbarch (), section_base), gdb_stdout); - printf_filtered ("\n"); - gdb_flush (gdb_stdout); - monitor_printf ("%x mw\r", section_base); - for (i = 0; i < section_size; i += 4) - { - monitor_expect (" -> ", NULL, 0); - bfd_get_section_contents (abfd, s, (char *) &buffer, i, 4); - monitor_printf ("%x\n", buffer); - } - monitor_expect (" -> ", NULL, 0); - monitor_printf ("q\n"); - monitor_expect_prompt (NULL, 0); - } -#else - if (!(catch_errors (m32r_load_1, abfd, "Load aborted!\n", RETURN_MASK_ALL))) - { - monitor_printf ("q\n"); - do_cleanups (cleanup); - return; - } -#endif - gettimeofday (&end_time, NULL); - printf_filtered ("Start address 0x%lx\n", - (unsigned long) bfd_get_start_address (abfd)); - print_transfer_performance (gdb_stdout, data_count, 0, &start_time, - &end_time); - - /* Finally, make the PC point at the start address. */ - if (exec_bfd) - regcache_write_pc (get_current_regcache (), - bfd_get_start_address (exec_bfd)); - - inferior_ptid = null_ptid; /* No process now. */ - - /* This is necessary because many things were based on the PC at the - time that we attached to the monitor, which is no longer valid - now that we have loaded new code (and just changed the PC). - Another way to do this might be to call normal_stop, except that - the stack may not be valid, and things would get horribly - confused... */ - - clear_symtab_users (0); - do_cleanups (cleanup); -} - -static void -m32r_load_gen (struct target_ops *self, const char *filename, int from_tty) -{ - generic_load (filename, from_tty); -} - -/* This array of registers needs to match the indexes used by GDB. The - whole reason this exists is because the various ROM monitors use - different names than GDB does, and don't support all the registers - either. So, typing "info reg sp" becomes an "A7". */ - -static char *m32r_regnames[] = - { "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", - "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", - "psw", "cbr", "spi", "spu", "bpc", "pc", "accl", "acch", -}; - -static void -m32r_supply_register (struct regcache *regcache, char *regname, - int regnamelen, char *val, int vallen) -{ - int regno; - int num_regs = sizeof (m32r_regnames) / sizeof (m32r_regnames[0]); - struct gdbarch *gdbarch = get_regcache_arch (regcache); - - for (regno = 0; regno < num_regs; regno++) - if (strncmp (regname, m32r_regnames[regno], regnamelen) == 0) - break; - - if (regno >= num_regs) - return; /* no match */ - - if (regno == ACCL_REGNUM) - { /* Special handling for 64-bit acc reg. */ - monitor_supply_register (regcache, ACCH_REGNUM, val); - val = strchr (val, ':'); /* Skip past ':' to get 2nd word. */ - if (val != NULL) - monitor_supply_register (regcache, ACCL_REGNUM, val + 1); - } - else - { - monitor_supply_register (regcache, regno, val); - if (regno == PSW_REGNUM) - { -#if (defined SM_REGNUM || defined BSM_REGNUM || defined IE_REGNUM \ - || defined BIE_REGNUM || defined COND_REGNUM || defined CBR_REGNUM \ - || defined BPC_REGNUM || defined BCARRY_REGNUM) - unsigned long psw = strtoul (val, NULL, 16); - char *zero = "00000000", *one = "00000001"; -#endif - -#ifdef SM_REGNUM - /* Stack mode bit */ - monitor_supply_register (regcache, SM_REGNUM, - (psw & 0x80) ? one : zero); -#endif -#ifdef BSM_REGNUM - /* Backup stack mode bit */ - monitor_supply_register (regcache, BSM_REGNUM, - (psw & 0x8000) ? one : zero); -#endif -#ifdef IE_REGNUM - /* Interrupt enable bit */ - monitor_supply_register (regcache, IE_REGNUM, - (psw & 0x40) ? one : zero); -#endif -#ifdef BIE_REGNUM - /* Backup interrupt enable bit */ - monitor_supply_register (regcache, BIE_REGNUM, - (psw & 0x4000) ? one : zero); -#endif -#ifdef COND_REGNUM - /* Condition bit (carry etc.) */ - monitor_supply_register (regcache, COND_REGNUM, - (psw & 0x1) ? one : zero); -#endif -#ifdef CBR_REGNUM - monitor_supply_register (regcache, CBR_REGNUM, - (psw & 0x1) ? one : zero); -#endif -#ifdef BPC_REGNUM - monitor_supply_register (regcache, BPC_REGNUM, - zero); /* KLUDGE: (???????) */ -#endif -#ifdef BCARRY_REGNUM - monitor_supply_register (regcache, BCARRY_REGNUM, - zero); /* KLUDGE: (??????) */ -#endif - } - - if (regno == SPI_REGNUM || regno == SPU_REGNUM) - { /* special handling for stack pointer (spu or spi). */ - ULONGEST stackmode, psw; - regcache_cooked_read_unsigned (regcache, PSW_REGNUM, &psw); - stackmode = psw & 0x80; - - if (regno == SPI_REGNUM && !stackmode) /* SP == SPI */ - monitor_supply_register (regcache, - gdbarch_sp_regnum (gdbarch), val); - else if (regno == SPU_REGNUM && stackmode) /* SP == SPU */ - monitor_supply_register (regcache, - gdbarch_sp_regnum (gdbarch), val); - } - } -} - -/* m32r RevC board monitor */ - -static struct target_ops m32r_ops; - -static char *m32r_inits[] = { "\r", NULL }; - -static struct monitor_ops m32r_cmds; - -static void -init_m32r_cmds (void) -{ - m32r_cmds.flags = MO_CLR_BREAK_USES_ADDR | MO_REGISTER_VALUE_FIRST; - m32r_cmds.init = m32r_inits; /* Init strings */ - m32r_cmds.cont = "go\r"; /* continue command */ - m32r_cmds.step = "step\r"; /* single step */ - m32r_cmds.stop = NULL; /* interrupt command */ - m32r_cmds.set_break = "%x +bp\r"; /* set a breakpoint */ - m32r_cmds.clr_break = "%x -bp\r"; /* clear a breakpoint */ - m32r_cmds.clr_all_break = "bpoff\r"; /* clear all breakpoints */ - m32r_cmds.fill = "%x %x %x fill\r"; /* fill (start length val) */ - m32r_cmds.setmem.cmdb = "%x 1 %x fill\r"; /* setmem.cmdb (addr, value) */ - m32r_cmds.setmem.cmdw = "%x 1 %x fillh\r"; /* setmem.cmdw (addr, value) */ - m32r_cmds.setmem.cmdl = "%x 1 %x fillw\r"; /* setmem.cmdl (addr, value) */ - m32r_cmds.setmem.cmdll = NULL; /* setmem.cmdll (addr, value) */ - m32r_cmds.setmem.resp_delim = NULL; /* setmem.resp_delim */ - m32r_cmds.setmem.term = NULL; /* setmem.term */ - m32r_cmds.setmem.term_cmd = NULL; /* setmem.term_cmd */ - m32r_cmds.getmem.cmdb = "%x %x dump\r"; /* getmem.cmdb (addr, len) */ - m32r_cmds.getmem.cmdw = NULL; /* getmem.cmdw (addr, len) */ - m32r_cmds.getmem.cmdl = NULL; /* getmem.cmdl (addr, len) */ - m32r_cmds.getmem.cmdll = NULL; /* getmem.cmdll (addr, len) */ - m32r_cmds.getmem.resp_delim = ": "; /* getmem.resp_delim */ - m32r_cmds.getmem.term = NULL; /* getmem.term */ - m32r_cmds.getmem.term_cmd = NULL; /* getmem.term_cmd */ - m32r_cmds.setreg.cmd = "%x to %%%s\r"; /* setreg.cmd (name, value) */ - m32r_cmds.setreg.resp_delim = NULL; /* setreg.resp_delim */ - m32r_cmds.setreg.term = NULL; /* setreg.term */ - m32r_cmds.setreg.term_cmd = NULL; /* setreg.term_cmd */ - m32r_cmds.getreg.cmd = NULL; /* getreg.cmd (name) */ - m32r_cmds.getreg.resp_delim = NULL; /* getreg.resp_delim */ - m32r_cmds.getreg.term = NULL; /* getreg.term */ - m32r_cmds.getreg.term_cmd = NULL; /* getreg.term_cmd */ - m32r_cmds.dump_registers = ".reg\r"; /* dump_registers */ - /* register_pattern */ - m32r_cmds.register_pattern = "\\(\\w+\\) += \\([0-9a-fA-F]+\\b\\)"; - m32r_cmds.supply_register = m32r_supply_register; - m32r_cmds.load = NULL; /* download command */ - m32r_cmds.loadresp = NULL; /* load response */ - m32r_cmds.prompt = "ok "; /* monitor command prompt */ - m32r_cmds.line_term = "\r"; /* end-of-line terminator */ - m32r_cmds.cmd_end = NULL; /* optional command terminator */ - m32r_cmds.target = &m32r_ops; /* target operations */ - m32r_cmds.stopbits = SERIAL_1_STOPBITS; /* number of stop bits */ - m32r_cmds.regnames = m32r_regnames; /* registers names */ - m32r_cmds.magic = MONITOR_OPS_MAGIC; /* magic */ -} /* init_m32r_cmds */ - -static void -m32r_open (const char *args, int from_tty) -{ - monitor_open (args, &m32r_cmds, from_tty); -} - -/* Mon2000 monitor (MSA2000 board) */ - -static struct target_ops mon2000_ops; -static struct monitor_ops mon2000_cmds; - -static void -init_mon2000_cmds (void) -{ - mon2000_cmds.flags = MO_CLR_BREAK_USES_ADDR | MO_REGISTER_VALUE_FIRST; - mon2000_cmds.init = m32r_inits; /* Init strings */ - mon2000_cmds.cont = "go\r"; /* continue command */ - mon2000_cmds.step = "step\r"; /* single step */ - mon2000_cmds.stop = NULL; /* interrupt command */ - mon2000_cmds.set_break = "%x +bp\r"; /* set a breakpoint */ - mon2000_cmds.clr_break = "%x -bp\r"; /* clear a breakpoint */ - mon2000_cmds.clr_all_break = "bpoff\r"; /* clear all breakpoints */ - mon2000_cmds.fill = "%x %x %x fill\r"; /* fill (start length val) */ - mon2000_cmds.setmem.cmdb = "%x 1 %x fill\r"; /* setmem.cmdb (addr, value) */ - mon2000_cmds.setmem.cmdw = "%x 1 %x fillh\r"; /* setmem.cmdw (addr, value) */ - mon2000_cmds.setmem.cmdl = "%x 1 %x fillw\r"; /* setmem.cmdl (addr, value) */ - mon2000_cmds.setmem.cmdll = NULL; /* setmem.cmdll (addr, value) */ - mon2000_cmds.setmem.resp_delim = NULL; /* setmem.resp_delim */ - mon2000_cmds.setmem.term = NULL; /* setmem.term */ - mon2000_cmds.setmem.term_cmd = NULL; /* setmem.term_cmd */ - mon2000_cmds.getmem.cmdb = "%x %x dump\r"; /* getmem.cmdb (addr, len) */ - mon2000_cmds.getmem.cmdw = NULL; /* getmem.cmdw (addr, len) */ - mon2000_cmds.getmem.cmdl = NULL; /* getmem.cmdl (addr, len) */ - mon2000_cmds.getmem.cmdll = NULL; /* getmem.cmdll (addr, len) */ - mon2000_cmds.getmem.resp_delim = ": "; /* getmem.resp_delim */ - mon2000_cmds.getmem.term = NULL; /* getmem.term */ - mon2000_cmds.getmem.term_cmd = NULL; /* getmem.term_cmd */ - mon2000_cmds.setreg.cmd = "%x to %%%s\r"; /* setreg.cmd (name, value) */ - mon2000_cmds.setreg.resp_delim = NULL; /* setreg.resp_delim */ - mon2000_cmds.setreg.term = NULL; /* setreg.term */ - mon2000_cmds.setreg.term_cmd = NULL; /* setreg.term_cmd */ - mon2000_cmds.getreg.cmd = NULL; /* getreg.cmd (name) */ - mon2000_cmds.getreg.resp_delim = NULL; /* getreg.resp_delim */ - mon2000_cmds.getreg.term = NULL; /* getreg.term */ - mon2000_cmds.getreg.term_cmd = NULL; /* getreg.term_cmd */ - mon2000_cmds.dump_registers = ".reg\r"; /* dump_registers */ - /* register_pattern */ - mon2000_cmds.register_pattern = "\\(\\w+\\) += \\([0-9a-fA-F]+\\b\\)"; - mon2000_cmds.supply_register = m32r_supply_register; - mon2000_cmds.load = NULL; /* download command */ - mon2000_cmds.loadresp = NULL; /* load response */ - mon2000_cmds.prompt = "Mon2000>"; /* monitor command prompt */ - mon2000_cmds.line_term = "\r"; /* end-of-line terminator */ - mon2000_cmds.cmd_end = NULL; /* optional command terminator */ - mon2000_cmds.target = &mon2000_ops; /* target operations */ - mon2000_cmds.stopbits = SERIAL_1_STOPBITS; /* number of stop bits */ - mon2000_cmds.regnames = m32r_regnames; /* registers names */ - mon2000_cmds.magic = MONITOR_OPS_MAGIC; /* magic */ -} /* init_mon2000_cmds */ - -static void -mon2000_open (const char *args, int from_tty) -{ - monitor_open (args, &mon2000_cmds, from_tty); -} - -static void -m32r_upload_command (char *args, int from_tty) -{ - bfd *abfd; - asection *s; - struct timeval start_time, end_time; - int resp_len, data_count = 0; - char buf[1024]; - struct hostent *hostent; - struct in_addr inet_addr; - struct cleanup *cleanup; - - /* First check to see if there's an ethernet port! */ - monitor_printf ("ust\r"); - resp_len = monitor_expect_prompt (buf, sizeof (buf)); - if (!strchr (buf, ':')) - error (_("No ethernet connection!")); - - if (board_addr == 0) - { - /* Scan second colon in the output from the "ust" command. */ - char *myIPaddress = strchr (strchr (buf, ':') + 1, ':') + 1; - - myIPaddress = skip_spaces (myIPaddress); - - if (startswith (myIPaddress, "0.0.")) /* empty */ - error (_("Please use 'set board-address' to " - "set the M32R-EVA board's IP address.")); - if (strchr (myIPaddress, '(')) - *(strchr (myIPaddress, '(')) = '\0'; /* delete trailing junk */ - board_addr = xstrdup (myIPaddress); - } - if (server_addr == 0) - { -#ifdef __MINGW32__ - WSADATA wd; - /* Winsock initialization. */ - if (WSAStartup (MAKEWORD (1, 1), &wd)) - error (_("Couldn't initialize WINSOCK.")); -#endif - - buf[0] = 0; - gethostname (buf, sizeof (buf)); - if (buf[0] != 0) - { - hostent = gethostbyname (buf); - if (hostent != 0) - { -#if 1 - memcpy (&inet_addr.s_addr, hostent->h_addr, - sizeof (inet_addr.s_addr)); - server_addr = (char *) inet_ntoa (inet_addr); -#else - server_addr = (char *) inet_ntoa (hostent->h_addr); -#endif - } - } - if (server_addr == 0) /* failed? */ - error (_("Need to know gdb host computer's " - "IP address (use 'set server-address')")); - } - - if (args == 0 || args[0] == 0) /* No args: upload the current - file. */ - args = get_exec_file (1); - - if (args[0] != '/' && download_path == 0) - { - if (current_directory) - download_path = xstrdup (current_directory); - else - error (_("Need to know default download " - "path (use 'set download-path')")); - } - - gettimeofday (&start_time, NULL); - monitor_printf ("uhip %s\r", server_addr); - resp_len = monitor_expect_prompt (buf, sizeof (buf)); /* parse result? */ - monitor_printf ("ulip %s\r", board_addr); - resp_len = monitor_expect_prompt (buf, sizeof (buf)); /* parse result? */ - if (args[0] != '/') - monitor_printf ("up %s\r", download_path); /* use default path */ - else - monitor_printf ("up\r"); /* rooted filename/path */ - resp_len = monitor_expect_prompt (buf, sizeof (buf)); /* parse result? */ - - if (strrchr (args, '.') && !strcmp (strrchr (args, '.'), ".srec")) - monitor_printf ("ul %s\r", args); - else /* add ".srec" suffix */ - monitor_printf ("ul %s.srec\r", args); - resp_len = monitor_expect_prompt (buf, sizeof (buf)); /* parse result? */ - - if (buf[0] == 0 || strstr (buf, "complete") == 0) - error (_("Upload file not found: %s.srec\n" - "Check IP addresses and download path."), - args); - else - printf_filtered (" -- Ethernet load complete.\n"); - - gettimeofday (&end_time, NULL); - abfd = gdb_bfd_open (args, NULL, -1); - cleanup = make_cleanup_bfd_unref (abfd); - if (abfd != NULL) - { /* Download is done -- print section statistics. */ - if (bfd_check_format (abfd, bfd_object) == 0) - { - printf_filtered ("File is not an object file\n"); - } - for (s = abfd->sections; s; s = s->next) - if (s->flags & SEC_LOAD) - { - bfd_size_type section_size = bfd_section_size (abfd, s); - bfd_vma section_base = bfd_section_lma (abfd, s); - - data_count += section_size; - - printf_filtered ("Loading section %s, size 0x%lx lma ", - bfd_section_name (abfd, s), - (unsigned long) section_size); - fputs_filtered (paddress (target_gdbarch (), section_base), - gdb_stdout); - printf_filtered ("\n"); - gdb_flush (gdb_stdout); - } - /* Finally, make the PC point at the start address. */ - regcache_write_pc (get_current_regcache (), - bfd_get_start_address (abfd)); - printf_filtered ("Start address 0x%lx\n", - (unsigned long) bfd_get_start_address (abfd)); - print_transfer_performance (gdb_stdout, data_count, 0, &start_time, - &end_time); - } - inferior_ptid = null_ptid; /* No process now. */ - - /* This is necessary because many things were based on the PC at the - time that we attached to the monitor, which is no longer valid - now that we have loaded new code (and just changed the PC). - Another way to do this might be to call normal_stop, except that - the stack may not be valid, and things would get horribly - confused... */ - - clear_symtab_users (0); - do_cleanups (cleanup); -} - -/* Provide a prototype to silence -Wmissing-prototypes. */ -extern initialize_file_ftype _initialize_m32r_rom; - -void -_initialize_m32r_rom (void) -{ - /* Initialize m32r RevC monitor target. */ - init_m32r_cmds (); - init_monitor_ops (&m32r_ops); - - m32r_ops.to_shortname = "m32r"; - m32r_ops.to_longname = "m32r monitor"; - m32r_ops.to_load = m32r_load_gen; /* Monitor lacks a download - command. */ - m32r_ops.to_doc = "Debug via the m32r monitor.\n\ -Specify the serial device it is connected to (e.g. /dev/ttya)."; - m32r_ops.to_open = m32r_open; - add_target (&m32r_ops); - - /* Initialize mon2000 monitor target */ - init_mon2000_cmds (); - init_monitor_ops (&mon2000_ops); - - mon2000_ops.to_shortname = "mon2000"; - mon2000_ops.to_longname = "Mon2000 monitor"; - mon2000_ops.to_load = m32r_load_gen; /* Monitor lacks a download - command. */ - mon2000_ops.to_doc = "Debug via the Mon2000 monitor.\n\ -Specify the serial device it is connected to (e.g. /dev/ttya)."; - mon2000_ops.to_open = mon2000_open; - add_target (&mon2000_ops); - - add_setshow_string_cmd ("download-path", class_obscure, &download_path, _("\ -Set the default path for downloadable SREC files."), _("\ -Show the default path for downloadable SREC files."), _("\ -Determines the default path for downloadable SREC files."), - NULL, - NULL, /* FIXME: i18n: The default path for - downloadable SREC files is %s. */ - &setlist, &showlist); - - add_setshow_string_cmd ("board-address", class_obscure, &board_addr, _("\ -Set IP address for M32R-EVA target board."), _("\ -Show IP address for M32R-EVA target board."), _("\ -Determine the IP address for M32R-EVA target board."), - NULL, - NULL, /* FIXME: i18n: IP address for - M32R-EVA target board is %s. */ - &setlist, &showlist); - - add_setshow_string_cmd ("server-address", class_obscure, &server_addr, _("\ -Set IP address for download server (GDB's host computer)."), _("\ -Show IP address for download server (GDB's host computer)."), _("\ -Determine the IP address for download server (GDB's host computer)."), - NULL, - NULL, /* FIXME: i18n: IP address for - download server (GDB's host - computer) is %s. */ - &setlist, &showlist); - - add_com ("upload", class_obscure, m32r_upload_command, _("\ -Upload the srec file via the monitor's Ethernet upload capability.")); - - add_com ("tload", class_obscure, m32r_load, _("test upload command.")); -} diff --git a/gdb/microblaze-rom.c b/gdb/microblaze-rom.c deleted file mode 100644 index beffadf1003..00000000000 --- a/gdb/microblaze-rom.c +++ /dev/null @@ -1,192 +0,0 @@ -/* Remote debugging interface to Xilinx MicroBlaze. - - Copyright (C) 2009-2015 Free Software Foundation, Inc. - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . */ - -#include "defs.h" -#include "gdbcore.h" -#include "target.h" -#include "monitor.h" -#include "serial.h" -#include "regcache.h" - -void _initialize_picobug_rom (void); - -static char *picobug_inits[] = -{"\r", NULL}; - -static struct target_ops picobug_ops; -static struct monitor_ops picobug_cmds; - -/* Picobug only supports a subset of registers from MCore. In reality, - it doesn't support ss1, either. */ -static char *picobug_regnames[] = { - "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", - "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - "psr", "vbr", "epsr", "fpsr", "epc", "fpc", 0, "ss1", - "ss2", "ss3", "ss4", 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - "pc" }; - - - -static void -picobug_open (const char *args, int from_tty) -{ - monitor_open (args, &picobug_cmds, from_tty); -} -/* We choose to write our own dumpregs routine, since the output of - the register dumping is rather difficult to encapsulate in a - regexp: - -picobug> rd - pc 2f00031e epc 2f00031e fpc 00000000 - psr 80000101 epsr 80000101 fpsr 00000000 -ss0-ss4 bad0beef 00000000 00000000 00000000 00000000 vbr 30005c00 - r0-r7 2f0fff4c 00000090 00000001 00000002 00000003 00000004 00000005 00000006 - r8-r15 2f0fff64 00000000 00000000 00000000 00000000 00000000 00000000 2f00031e -*/ - -static int -picobug_dumpregs (struct regcache *regcache) -{ - struct gdbarch *gdbarch = get_regcache_arch (regcache); - char buf[1024]; - int resp_len; - char *p; - - /* Send the dump register command to the monitor and - get the reply. */ - monitor_printf (picobug_cmds.dump_registers); - resp_len = monitor_expect_prompt (buf, sizeof (buf)); - - p = strtok (buf, " \t\r\n"); - while (p) - { - if (strchr (p, '-')) - { - /* Got a range. Either r0-r7, r8-r15 or ss0-ss4. */ - if (startswith (p, "r0") || startswith (p, "r8")) - { - int rn = (p[1] == '0' ? 0 : 8); - int i = 0; - - /* Get the next 8 values and record them. */ - while (i < 8) - { - p = strtok (NULL, " \t\r\n"); - if (p) - monitor_supply_register (regcache, rn + i, p); - i++; - } - } - else if (startswith (p, "ss")) - { - /* Get the next five values, ignoring the first. */ - int rn; - p = strtok (NULL, " \t\r\n"); - for (rn = 39; rn < 43; rn++) - { - p = strtok (NULL, " \t\r\n"); - if (p) - monitor_supply_register (regcache, rn, p); - } - } - else - { - break; - } - } - else - { - /* Simple register type, paired. */ - char *name = p; - int i; - - /* Get and record value. */ - p = strtok (NULL, " \t\r\n"); - if (p) - { - for (i = 0; i < gdbarch_num_regs (gdbarch); i++) - { - if (picobug_regnames[i] - && strcmp (picobug_regnames[i], name) == 0) - break; - } - - if (i <= gdbarch_num_regs (gdbarch)) - monitor_supply_register (regcache, i, p); - } - } - p = strtok (NULL, " \t\r\n"); - } - - return 0; -} - -static void -init_picobug_cmds (void) -{ - picobug_cmds.flags = MO_GETMEM_NEEDS_RANGE | MO_CLR_BREAK_USES_ADDR - | MO_PRINT_PROGRAM_OUTPUT; - - picobug_cmds.init = picobug_inits; /* Init strings */ - picobug_cmds.cont = "g\n"; /* continue command */ - picobug_cmds.step = "s\n"; /* single step */ - picobug_cmds.set_break = "br %x\n"; /* set a breakpoint */ - picobug_cmds.clr_break = "nobr %x\n"; /* clear a breakpoint */ - picobug_cmds.clr_all_break = "nobr\n"; /* clear all breakpoints */ - picobug_cmds.setmem.cmdb = "mm %x %x ;b\n"; /* setmem.cmdb (addr, value) */ - picobug_cmds.setmem.cmdw = "mm %x %x ;h\n"; /* setmem.cmdw (addr, value) */ - picobug_cmds.setmem.cmdl = "mm %x %x ;w\n"; /* setmem.cmdl (addr, value) */ - picobug_cmds.getmem.cmdb = "md %x %x\n"; /* getmem.cmdb (start addr, - end addr) */ - picobug_cmds.getmem.resp_delim = ":"; /* getmem.resp_delim */ - picobug_cmds.setreg.cmd = "rm %s %x\n"; /* setreg.cmd (name, value) */ - picobug_cmds.getreg.cmd = "rd %s\n"; /* getreg.cmd (name) */ - picobug_cmds.getreg.resp_delim = ":"; /* getreg.resp_delim */ - picobug_cmds.dump_registers = "rd\n"; /* dump_registers */ - picobug_cmds.dumpregs = picobug_dumpregs; /* dump registers parser */ - picobug_cmds.load = "lo\n"; /* download command */ - picobug_cmds.prompt = "picobug> "; /* monitor command prompt */ - picobug_cmds.line_term = "\n"; /* end-of-line terminator */ - picobug_cmds.target = &picobug_ops; /* target operations */ - picobug_cmds.stopbits = SERIAL_1_STOPBITS; /* number of stop bits */ - picobug_cmds.regnames = picobug_regnames; /* registers names */ - picobug_cmds.num_breakpoints = 20; /* number of breakpoints */ - picobug_cmds.magic = MONITOR_OPS_MAGIC; /* magic */ -} - -void -_initialize_picobug_rom (void) -{ - int i; - - /* Initialize m32r RevC monitor target. */ - init_picobug_cmds (); - init_monitor_ops (&picobug_ops); - picobug_ops.to_shortname = "picobug"; - picobug_ops.to_longname = "picobug monitor"; - picobug_ops.to_doc = "Debug via the picobug monitor.\n\ -Specify the serial device it is connected to (e.g. /dev/ttya)."; - picobug_ops.to_open = picobug_open; - - add_target (&picobug_ops); -} diff --git a/gdb/monitor.c b/gdb/monitor.c deleted file mode 100644 index 4657d7383f3..00000000000 --- a/gdb/monitor.c +++ /dev/null @@ -1,2417 +0,0 @@ -/* Remote debugging interface for boot monitors, for GDB. - - Copyright (C) 1990-2015 Free Software Foundation, Inc. - - Contributed by Cygnus Support. Written by Rob Savoye for Cygnus. - Resurrected from the ashes by Stu Grossman. - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . */ - -/* This file was derived from various remote-* modules. It is a collection - of generic support functions so GDB can talk directly to a ROM based - monitor. This saves use from having to hack an exception based handler - into existence, and makes for quick porting. - - This module talks to a debug monitor called 'MONITOR', which - We communicate with MONITOR via either a direct serial line, or a TCP - (or possibly TELNET) stream to a terminal multiplexor, - which in turn talks to the target board. */ - -/* FIXME 32x64: This code assumes that registers and addresses are at - most 32 bits long. If they can be larger, you will need to declare - values as LONGEST and use %llx or some such to print values when - building commands to send to the monitor. Since we don't know of - any actual 64-bit targets with ROM monitors that use this code, - it's not an issue right now. -sts 4/18/96 */ - -#include "defs.h" -#include "gdbcore.h" -#include "target.h" -#include -#include -#include -#include "command.h" -#include "serial.h" -#include "monitor.h" -#include "gdbcmd.h" -#include "inferior.h" -#include "infrun.h" -#include "gdb_regex.h" -#include "srec.h" -#include "regcache.h" -#include "gdbthread.h" -#include "readline/readline.h" -#include "rsp-low.h" - -static char *dev_name; -static struct target_ops *targ_ops; - -static void monitor_interrupt_query (void); -static void monitor_interrupt_twice (int); -static void monitor_stop (struct target_ops *self, ptid_t); -static void monitor_dump_regs (struct regcache *regcache); - -#if 0 -static int from_hex (int a); -#endif - -static struct monitor_ops *current_monitor; - -static int hashmark; /* flag set by "set hash". */ - -static int timeout = 30; - -static int in_monitor_wait = 0; /* Non-zero means we are in monitor_wait(). */ - -static void (*ofunc) (); /* Old SIGINT signal handler. */ - -static CORE_ADDR *breakaddr; - -/* Descriptor for I/O to remote machine. Initialize it to NULL so - that monitor_open knows that we don't have a file open when the - program starts. */ - -static struct serial *monitor_desc = NULL; - -/* Pointer to regexp pattern matching data. */ - -static struct re_pattern_buffer register_pattern; -static char register_fastmap[256]; - -static struct re_pattern_buffer getmem_resp_delim_pattern; -static char getmem_resp_delim_fastmap[256]; - -static struct re_pattern_buffer setmem_resp_delim_pattern; -static char setmem_resp_delim_fastmap[256]; - -static struct re_pattern_buffer setreg_resp_delim_pattern; -static char setreg_resp_delim_fastmap[256]; - -static int dump_reg_flag; /* Non-zero means do a dump_registers cmd when - monitor_wait wakes up. */ - -static int first_time = 0; /* Is this the first time we're - executing after gaving created the - child proccess? */ - - -/* This is the ptid we use while we're connected to a monitor. Its - value is arbitrary, as monitor targets don't have a notion of - processes or threads, but we need something non-null to place in - inferior_ptid. */ -static ptid_t monitor_ptid; - -#define TARGET_BUF_SIZE 2048 - -/* Monitor specific debugging information. Typically only useful to - the developer of a new monitor interface. */ - -static void monitor_debug (const char *fmt, ...) ATTRIBUTE_PRINTF (1, 2); - -static unsigned int monitor_debug_p = 0; - -/* NOTE: This file alternates between monitor_debug_p and remote_debug - when determining if debug information is printed. Perhaps this - could be simplified. */ - -static void -monitor_debug (const char *fmt, ...) -{ - if (monitor_debug_p) - { - va_list args; - - va_start (args, fmt); - vfprintf_filtered (gdb_stdlog, fmt, args); - va_end (args); - } -} - - -/* Convert a string into a printable representation, Return # byte in - the new string. When LEN is >0 it specifies the size of the - string. Otherwize strlen(oldstr) is used. */ - -static void -monitor_printable_string (char *newstr, char *oldstr, int len) -{ - int ch; - int i; - - if (len <= 0) - len = strlen (oldstr); - - for (i = 0; i < len; i++) - { - ch = oldstr[i]; - switch (ch) - { - default: - if (isprint (ch)) - *newstr++ = ch; - - else - { - sprintf (newstr, "\\x%02x", ch & 0xff); - newstr += 4; - } - break; - - case '\\': - *newstr++ = '\\'; - *newstr++ = '\\'; - break; - case '\b': - *newstr++ = '\\'; - *newstr++ = 'b'; - break; - case '\f': - *newstr++ = '\\'; - *newstr++ = 't'; - break; - case '\n': - *newstr++ = '\\'; - *newstr++ = 'n'; - break; - case '\r': - *newstr++ = '\\'; - *newstr++ = 'r'; - break; - case '\t': - *newstr++ = '\\'; - *newstr++ = 't'; - break; - case '\v': - *newstr++ = '\\'; - *newstr++ = 'v'; - break; - } - } - - *newstr++ = '\0'; -} - -/* Print monitor errors with a string, converting the string to printable - representation. */ - -static void -monitor_error (char *function, char *message, - CORE_ADDR memaddr, int len, char *string, int final_char) -{ - int real_len = (len == 0 && string != (char *) 0) ? strlen (string) : len; - char *safe_string = alloca ((real_len * 4) + 1); - - monitor_printable_string (safe_string, string, real_len); - - if (final_char) - error (_("%s (%s): %s: %s%c"), - function, paddress (target_gdbarch (), memaddr), - message, safe_string, final_char); - else - error (_("%s (%s): %s: %s"), - function, paddress (target_gdbarch (), memaddr), - message, safe_string); -} - -/* monitor_vsprintf - similar to vsprintf but handles 64-bit addresses - - This function exists to get around the problem that many host platforms - don't have a printf that can print 64-bit addresses. The %A format - specification is recognized as a special case, and causes the argument - to be printed as a 64-bit hexadecimal address. - - Only format specifiers of the form "[0-9]*[a-z]" are recognized. - If it is a '%s' format, the argument is a string; otherwise the - argument is assumed to be a long integer. - - %% is also turned into a single %. */ - -static void -monitor_vsprintf (char *sndbuf, char *pattern, va_list args) -{ - int addr_bit = gdbarch_addr_bit (target_gdbarch ()); - char format[10]; - char fmt; - char *p; - int i; - long arg_int; - CORE_ADDR arg_addr; - char *arg_string; - - for (p = pattern; *p; p++) - { - if (*p == '%') - { - /* Copy the format specifier to a separate buffer. */ - format[0] = *p++; - for (i = 1; *p >= '0' && *p <= '9' && i < (int) sizeof (format) - 2; - i++, p++) - format[i] = *p; - format[i] = fmt = *p; - format[i + 1] = '\0'; - - /* Fetch the next argument and print it. */ - switch (fmt) - { - case '%': - strcpy (sndbuf, "%"); - break; - case 'A': - arg_addr = va_arg (args, CORE_ADDR); - strcpy (sndbuf, phex_nz (arg_addr, addr_bit / 8)); - break; - case 's': - arg_string = va_arg (args, char *); - sprintf (sndbuf, format, arg_string); - break; - default: - arg_int = va_arg (args, long); - sprintf (sndbuf, format, arg_int); - break; - } - sndbuf += strlen (sndbuf); - } - else - *sndbuf++ = *p; - } - *sndbuf = '\0'; -} - - -/* monitor_printf_noecho -- Send data to monitor, but don't expect an echo. - Works just like printf. */ - -void -monitor_printf_noecho (char *pattern,...) -{ - va_list args; - char sndbuf[2000]; - int len; - - va_start (args, pattern); - - monitor_vsprintf (sndbuf, pattern, args); - - len = strlen (sndbuf); - if (len + 1 > sizeof sndbuf) - internal_error (__FILE__, __LINE__, - _("failed internal consistency check")); - - if (monitor_debug_p) - { - char *safe_string = (char *) alloca ((strlen (sndbuf) * 4) + 1); - - monitor_printable_string (safe_string, sndbuf, 0); - fprintf_unfiltered (gdb_stdlog, "sent[%s]\n", safe_string); - } - - monitor_write (sndbuf, len); -} - -/* monitor_printf -- Send data to monitor and check the echo. Works just like - printf. */ - -void -monitor_printf (char *pattern,...) -{ - va_list args; - char sndbuf[2000]; - int len; - - va_start (args, pattern); - - monitor_vsprintf (sndbuf, pattern, args); - - len = strlen (sndbuf); - if (len + 1 > sizeof sndbuf) - internal_error (__FILE__, __LINE__, - _("failed internal consistency check")); - - if (monitor_debug_p) - { - char *safe_string = (char *) alloca ((len * 4) + 1); - - monitor_printable_string (safe_string, sndbuf, 0); - fprintf_unfiltered (gdb_stdlog, "sent[%s]\n", safe_string); - } - - monitor_write (sndbuf, len); - - /* We used to expect that the next immediate output was the - characters we just output, but sometimes some extra junk appeared - before the characters we expected, like an extra prompt, or a - portmaster sending telnet negotiations. So, just start searching - for what we sent, and skip anything unknown. */ - monitor_debug ("ExpectEcho\n"); - monitor_expect (sndbuf, (char *) 0, 0); -} - - -/* Write characters to the remote system. */ - -void -monitor_write (char *buf, int buflen) -{ - if (serial_write (monitor_desc, buf, buflen)) - fprintf_unfiltered (gdb_stderr, "serial_write failed: %s\n", - safe_strerror (errno)); -} - - -/* Read a binary character from the remote system, doing all the fancy - timeout stuff, but without interpreting the character in any way, - and without printing remote debug information. */ - -int -monitor_readchar (void) -{ - int c; - int looping; - - do - { - looping = 0; - c = serial_readchar (monitor_desc, timeout); - - if (c >= 0) - c &= 0xff; /* don't lose bit 7 */ - } - while (looping); - - if (c >= 0) - return c; - - if (c == SERIAL_TIMEOUT) - error (_("Timeout reading from remote system.")); - - perror_with_name (_("remote-monitor")); -} - - -/* Read a character from the remote system, doing all the fancy - timeout stuff. */ - -static int -readchar (int timeout) -{ - int c; - static enum - { - last_random, last_nl, last_cr, last_crnl - } - state = last_random; - int looping; - - do - { - looping = 0; - c = serial_readchar (monitor_desc, timeout); - - if (c >= 0) - { - c &= 0x7f; - /* This seems to interfere with proper function of the - input stream. */ - if (monitor_debug_p || remote_debug) - { - char buf[2]; - - buf[0] = c; - buf[1] = '\0'; - puts_debug ("read -->", buf, "<--"); - } - - } - - /* Canonicialize \n\r combinations into one \r. */ - if ((current_monitor->flags & MO_HANDLE_NL) != 0) - { - if ((c == '\r' && state == last_nl) - || (c == '\n' && state == last_cr)) - { - state = last_crnl; - looping = 1; - } - else if (c == '\r') - state = last_cr; - else if (c != '\n') - state = last_random; - else - { - state = last_nl; - c = '\r'; - } - } - } - while (looping); - - if (c >= 0) - return c; - - if (c == SERIAL_TIMEOUT) -#if 0 - /* I fail to see how detaching here can be useful. */ - if (in_monitor_wait) /* Watchdog went off. */ - { - target_mourn_inferior (); - error (_("GDB serial timeout has expired. Target detached.")); - } - else -#endif - error (_("Timeout reading from remote system.")); - - perror_with_name (_("remote-monitor")); -} - -/* Scan input from the remote system, until STRING is found. If BUF is non- - zero, then collect input until we have collected either STRING or BUFLEN-1 - chars. In either case we terminate BUF with a 0. If input overflows BUF - because STRING can't be found, return -1, else return number of chars in BUF - (minus the terminating NUL). Note that in the non-overflow case, STRING - will be at the end of BUF. */ - -int -monitor_expect (char *string, char *buf, int buflen) -{ - char *p = string; - int obuflen = buflen; - int c; - - if (monitor_debug_p) - { - char *safe_string = (char *) alloca ((strlen (string) * 4) + 1); - monitor_printable_string (safe_string, string, 0); - fprintf_unfiltered (gdb_stdlog, "MON Expecting '%s'\n", safe_string); - } - - immediate_quit++; - QUIT; - while (1) - { - if (buf) - { - if (buflen < 2) - { - *buf = '\000'; - immediate_quit--; - return -1; - } - - c = readchar (timeout); - if (c == '\000') - continue; - *buf++ = c; - buflen--; - } - else - c = readchar (timeout); - - /* Don't expect any ^C sent to be echoed. */ - - if (*p == '\003' || c == *p) - { - p++; - if (*p == '\0') - { - immediate_quit--; - - if (buf) - { - *buf++ = '\000'; - return obuflen - buflen; - } - else - return 0; - } - } - else - { - /* We got a character that doesn't match the string. We need to - back up p, but how far? If we're looking for "..howdy" and the - monitor sends "...howdy"? There's certainly a match in there, - but when we receive the third ".", we won't find it if we just - restart the matching at the beginning of the string. - - This is a Boyer-Moore kind of situation. We want to reset P to - the end of the longest prefix of STRING that is a suffix of - what we've read so far. In the example above, that would be - ".." --- the longest prefix of "..howdy" that is a suffix of - "...". This longest prefix could be the empty string, if C - is nowhere to be found in STRING. - - If this longest prefix is not the empty string, it must contain - C, so let's search from the end of STRING for instances of C, - and see if the portion of STRING before that is a suffix of - what we read before C. Actually, we can search backwards from - p, since we know no prefix can be longer than that. - - Note that we can use STRING itself, along with C, as a record - of what we've received so far. :) */ - int i; - - for (i = (p - string) - 1; i >= 0; i--) - if (string[i] == c) - { - /* Is this prefix a suffix of what we've read so far? - In other words, does - string[0 .. i-1] == string[p - i, p - 1]? */ - if (! memcmp (string, p - i, i)) - { - p = string + i + 1; - break; - } - } - if (i < 0) - p = string; - } - } -} - -/* Search for a regexp. */ - -static int -monitor_expect_regexp (struct re_pattern_buffer *pat, char *buf, int buflen) -{ - char *mybuf; - char *p; - - monitor_debug ("MON Expecting regexp\n"); - if (buf) - mybuf = buf; - else - { - mybuf = alloca (TARGET_BUF_SIZE); - buflen = TARGET_BUF_SIZE; - } - - p = mybuf; - while (1) - { - int retval; - - if (p - mybuf >= buflen) - { /* Buffer about to overflow. */ - -/* On overflow, we copy the upper half of the buffer to the lower half. Not - great, but it usually works... */ - - memcpy (mybuf, mybuf + buflen / 2, buflen / 2); - p = mybuf + buflen / 2; - } - - *p++ = readchar (timeout); - - retval = re_search (pat, mybuf, p - mybuf, 0, p - mybuf, NULL); - if (retval >= 0) - return 1; - } -} - -/* Keep discarding input until we see the MONITOR prompt. - - The convention for dealing with the prompt is that you - o give your command - o *then* wait for the prompt. - - Thus the last thing that a procedure does with the serial line will - be an monitor_expect_prompt(). Exception: monitor_resume does not - wait for the prompt, because the terminal is being handed over to - the inferior. However, the next thing which happens after that is - a monitor_wait which does wait for the prompt. Note that this - includes abnormal exit, e.g. error(). This is necessary to prevent - getting into states from which we can't recover. */ - -int -monitor_expect_prompt (char *buf, int buflen) -{ - monitor_debug ("MON Expecting prompt\n"); - return monitor_expect (current_monitor->prompt, buf, buflen); -} - -/* Get N 32-bit words from remote, each preceded by a space, and put - them in registers starting at REGNO. */ - -#if 0 -static unsigned long -get_hex_word (void) -{ - unsigned long val; - int i; - int ch; - - do - ch = readchar (timeout); - while (isspace (ch)); - - val = from_hex (ch); - - for (i = 7; i >= 1; i--) - { - ch = readchar (timeout); - if (!isxdigit (ch)) - break; - val = (val << 4) | from_hex (ch); - } - - return val; -} -#endif - -static void -compile_pattern (char *pattern, struct re_pattern_buffer *compiled_pattern, - char *fastmap) -{ - int tmp; - const char *val; - - compiled_pattern->fastmap = fastmap; - - tmp = re_set_syntax (RE_SYNTAX_EMACS); - val = re_compile_pattern (pattern, - strlen (pattern), - compiled_pattern); - re_set_syntax (tmp); - - if (val) - error (_("compile_pattern: Can't compile pattern string `%s': %s!"), - pattern, val); - - if (fastmap) - re_compile_fastmap (compiled_pattern); -} - -/* Open a connection to a remote debugger. NAME is the filename used - for communication. */ - -void -monitor_open (const char *args, struct monitor_ops *mon_ops, int from_tty) -{ - const char *name; - char **p; - struct inferior *inf; - - if (mon_ops->magic != MONITOR_OPS_MAGIC) - error (_("Magic number of monitor_ops struct wrong.")); - - targ_ops = mon_ops->target; - name = targ_ops->to_shortname; - - if (!args) - error (_("Use `target %s DEVICE-NAME' to use a serial port, or\n\ -`target %s HOST-NAME:PORT-NUMBER' to use a network connection."), name, name); - - target_preopen (from_tty); - - /* Setup pattern for register dump. */ - - if (mon_ops->register_pattern) - compile_pattern (mon_ops->register_pattern, ®ister_pattern, - register_fastmap); - - if (mon_ops->getmem.resp_delim) - compile_pattern (mon_ops->getmem.resp_delim, &getmem_resp_delim_pattern, - getmem_resp_delim_fastmap); - - if (mon_ops->setmem.resp_delim) - compile_pattern (mon_ops->setmem.resp_delim, &setmem_resp_delim_pattern, - setmem_resp_delim_fastmap); - - if (mon_ops->setreg.resp_delim) - compile_pattern (mon_ops->setreg.resp_delim, &setreg_resp_delim_pattern, - setreg_resp_delim_fastmap); - - unpush_target (targ_ops); - - if (dev_name) - xfree (dev_name); - dev_name = xstrdup (args); - - monitor_desc = serial_open (dev_name); - - if (!monitor_desc) - perror_with_name (dev_name); - - if (baud_rate != -1) - { - if (serial_setbaudrate (monitor_desc, baud_rate)) - { - serial_close (monitor_desc); - perror_with_name (dev_name); - } - } - - serial_setparity (monitor_desc, serial_parity); - serial_raw (monitor_desc); - - serial_flush_input (monitor_desc); - - /* some systems only work with 2 stop bits. */ - - serial_setstopbits (monitor_desc, mon_ops->stopbits); - - current_monitor = mon_ops; - - /* See if we can wake up the monitor. First, try sending a stop sequence, - then send the init strings. Last, remove all breakpoints. */ - - if (current_monitor->stop) - { - monitor_stop (targ_ops, inferior_ptid); - if ((current_monitor->flags & MO_NO_ECHO_ON_OPEN) == 0) - { - monitor_debug ("EXP Open echo\n"); - monitor_expect_prompt (NULL, 0); - } - } - - /* wake up the monitor and see if it's alive. */ - for (p = mon_ops->init; *p != NULL; p++) - { - /* Some of the characters we send may not be echoed, - but we hope to get a prompt at the end of it all. */ - - if ((current_monitor->flags & MO_NO_ECHO_ON_OPEN) == 0) - monitor_printf (*p); - else - monitor_printf_noecho (*p); - monitor_expect_prompt (NULL, 0); - } - - serial_flush_input (monitor_desc); - - /* Alloc breakpoints */ - if (mon_ops->set_break != NULL) - { - if (mon_ops->num_breakpoints == 0) - mon_ops->num_breakpoints = 8; - - breakaddr = (CORE_ADDR *) - xmalloc (mon_ops->num_breakpoints * sizeof (CORE_ADDR)); - memset (breakaddr, 0, mon_ops->num_breakpoints * sizeof (CORE_ADDR)); - } - - /* Remove all breakpoints. */ - - if (mon_ops->clr_all_break) - { - monitor_printf (mon_ops->clr_all_break); - monitor_expect_prompt (NULL, 0); - } - - if (from_tty) - printf_unfiltered (_("Remote target %s connected to %s\n"), - name, dev_name); - - push_target (targ_ops); - - /* Start afresh. */ - init_thread_list (); - - /* Make run command think we are busy... */ - inferior_ptid = monitor_ptid; - inf = current_inferior (); - inferior_appeared (inf, ptid_get_pid (inferior_ptid)); - add_thread_silent (inferior_ptid); - - /* Give monitor_wait something to read. */ - - monitor_printf (current_monitor->line_term); - - init_wait_for_inferior (); - - start_remote (from_tty); -} - -/* Close out all files and local state before this target loses - control. */ - -void -monitor_close (struct target_ops *self) -{ - if (monitor_desc) - serial_close (monitor_desc); - - /* Free breakpoint memory. */ - if (breakaddr != NULL) - { - xfree (breakaddr); - breakaddr = NULL; - } - - monitor_desc = NULL; - - discard_all_inferiors (); -} - -/* Terminate the open connection to the remote debugger. Use this - when you want to detach and do something else with your gdb. */ - -static void -monitor_detach (struct target_ops *ops, const char *args, int from_tty) -{ - unpush_target (ops); /* calls monitor_close to do the real work. */ - if (from_tty) - printf_unfiltered (_("Ending remote %s debugging\n"), target_shortname); -} - -/* Convert VALSTR into the target byte-ordered value of REGNO and store it. */ - -char * -monitor_supply_register (struct regcache *regcache, int regno, char *valstr) -{ - struct gdbarch *gdbarch = get_regcache_arch (regcache); - enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); - ULONGEST val; - unsigned char regbuf[MAX_REGISTER_SIZE]; - char *p; - - val = 0; - p = valstr; - while (p && *p != '\0') - { - if (*p == '\r' || *p == '\n') - { - while (*p != '\0') - p++; - break; - } - if (isspace (*p)) - { - p++; - continue; - } - if (!isxdigit (*p) && *p != 'x') - { - break; - } - - val <<= 4; - val += fromhex (*p++); - } - monitor_debug ("Supplying Register %d %s\n", regno, valstr); - - if (val == 0 && valstr == p) - error (_("monitor_supply_register (%d): bad value from monitor: %s."), - regno, valstr); - - /* supply register stores in target byte order, so swap here. */ - - store_unsigned_integer (regbuf, register_size (gdbarch, regno), byte_order, - val); - - regcache_raw_supply (regcache, regno, regbuf); - - return p; -} - -/* Tell the remote machine to resume. */ - -static void -monitor_resume (struct target_ops *ops, - ptid_t ptid, int step, enum gdb_signal sig) -{ - /* Some monitors require a different command when starting a program. */ - monitor_debug ("MON resume\n"); - if (current_monitor->flags & MO_RUN_FIRST_TIME && first_time == 1) - { - first_time = 0; - monitor_printf ("run\r"); - if (current_monitor->flags & MO_NEED_REGDUMP_AFTER_CONT) - dump_reg_flag = 1; - return; - } - if (step) - monitor_printf (current_monitor->step); - else - { - if (current_monitor->continue_hook) - (*current_monitor->continue_hook) (); - else - monitor_printf (current_monitor->cont); - if (current_monitor->flags & MO_NEED_REGDUMP_AFTER_CONT) - dump_reg_flag = 1; - } -} - -/* Parse the output of a register dump command. A monitor specific - regexp is used to extract individual register descriptions of the - form REG=VAL. Each description is split up into a name and a value - string which are passed down to monitor specific code. */ - -static void -parse_register_dump (struct regcache *regcache, char *buf, int len) -{ - monitor_debug ("MON Parsing register dump\n"); - while (1) - { - int regnamelen, vallen; - char *regname, *val; - - /* Element 0 points to start of register name, and element 1 - points to the start of the register value. */ - struct re_registers register_strings; - - memset (®ister_strings, 0, sizeof (struct re_registers)); - - if (re_search (®ister_pattern, buf, len, 0, len, - ®ister_strings) == -1) - break; - - regnamelen = register_strings.end[1] - register_strings.start[1]; - regname = buf + register_strings.start[1]; - vallen = register_strings.end[2] - register_strings.start[2]; - val = buf + register_strings.start[2]; - - current_monitor->supply_register (regcache, regname, regnamelen, - val, vallen); - - buf += register_strings.end[0]; - len -= register_strings.end[0]; - } -} - -/* Send ^C to target to halt it. Target will respond, and send us a - packet. */ - -static void -monitor_interrupt (int signo) -{ - /* If this doesn't work, try more severe steps. */ - signal (signo, monitor_interrupt_twice); - - if (monitor_debug_p || remote_debug) - fprintf_unfiltered (gdb_stdlog, "monitor_interrupt called\n"); - - target_stop (inferior_ptid); -} - -/* The user typed ^C twice. */ - -static void -monitor_interrupt_twice (int signo) -{ - signal (signo, ofunc); - - monitor_interrupt_query (); - - signal (signo, monitor_interrupt); -} - -/* Ask the user what to do when an interrupt is received. */ - -static void -monitor_interrupt_query (void) -{ - target_terminal_ours (); - - if (query (_("Interrupted while waiting for the program.\n\ -Give up (and stop debugging it)? "))) - { - target_mourn_inferior (); - quit (); - } - - target_terminal_inferior (); -} - -static void -monitor_wait_cleanup (void *old_timeout) -{ - timeout = *(int *) old_timeout; - signal (SIGINT, ofunc); - in_monitor_wait = 0; -} - - - -static void -monitor_wait_filter (char *buf, - int bufmax, - int *ext_resp_len, - struct target_waitstatus *status) -{ - int resp_len; - - do - { - resp_len = monitor_expect_prompt (buf, bufmax); - *ext_resp_len = resp_len; - - if (resp_len <= 0) - fprintf_unfiltered (gdb_stderr, - "monitor_wait: excessive " - "response from monitor: %s.", buf); - } - while (resp_len < 0); - - /* Print any output characters that were preceded by ^O. */ - /* FIXME - This would be great as a user settabgle flag. */ - if (monitor_debug_p || remote_debug - || current_monitor->flags & MO_PRINT_PROGRAM_OUTPUT) - { - int i; - - for (i = 0; i < resp_len - 1; i++) - if (buf[i] == 0x0f) - putchar_unfiltered (buf[++i]); - } -} - - - -/* Wait until the remote machine stops, then return, storing status in - status just as `wait' would. */ - -static ptid_t -monitor_wait (struct target_ops *ops, - ptid_t ptid, struct target_waitstatus *status, int options) -{ - int old_timeout = timeout; - char buf[TARGET_BUF_SIZE]; - int resp_len; - struct cleanup *old_chain; - - status->kind = TARGET_WAITKIND_EXITED; - status->value.integer = 0; - - old_chain = make_cleanup (monitor_wait_cleanup, &old_timeout); - monitor_debug ("MON wait\n"); - -#if 0 - /* This is somthing other than a maintenance command. */ - in_monitor_wait = 1; - timeout = watchdog > 0 ? watchdog : -1; -#else - timeout = -1; /* Don't time out -- user program is running. */ -#endif - - ofunc = (void (*)()) signal (SIGINT, monitor_interrupt); - - if (current_monitor->wait_filter) - (*current_monitor->wait_filter) (buf, sizeof (buf), &resp_len, status); - else - monitor_wait_filter (buf, sizeof (buf), &resp_len, status); - -#if 0 /* Transferred to monitor wait filter. */ - do - { - resp_len = monitor_expect_prompt (buf, sizeof (buf)); - - if (resp_len <= 0) - fprintf_unfiltered (gdb_stderr, - "monitor_wait: excessive " - "response from monitor: %s.", buf); - } - while (resp_len < 0); - - /* Print any output characters that were preceded by ^O. */ - /* FIXME - This would be great as a user settabgle flag. */ - if (monitor_debug_p || remote_debug - || current_monitor->flags & MO_PRINT_PROGRAM_OUTPUT) - { - int i; - - for (i = 0; i < resp_len - 1; i++) - if (buf[i] == 0x0f) - putchar_unfiltered (buf[++i]); - } -#endif - - signal (SIGINT, ofunc); - - timeout = old_timeout; -#if 0 - if (dump_reg_flag && current_monitor->dump_registers) - { - dump_reg_flag = 0; - monitor_printf (current_monitor->dump_registers); - resp_len = monitor_expect_prompt (buf, sizeof (buf)); - } - - if (current_monitor->register_pattern) - parse_register_dump (get_current_regcache (), buf, resp_len); -#else - monitor_debug ("Wait fetching registers after stop\n"); - monitor_dump_regs (get_current_regcache ()); -#endif - - status->kind = TARGET_WAITKIND_STOPPED; - status->value.sig = GDB_SIGNAL_TRAP; - - discard_cleanups (old_chain); - - in_monitor_wait = 0; - - return inferior_ptid; -} - -/* Fetch register REGNO, or all registers if REGNO is -1. Returns - errno value. */ - -static void -monitor_fetch_register (struct regcache *regcache, int regno) -{ - const char *name; - char *zerobuf; - char *regbuf; - int i; - - regbuf = alloca (MAX_REGISTER_SIZE * 2 + 1); - zerobuf = alloca (MAX_REGISTER_SIZE); - memset (zerobuf, 0, MAX_REGISTER_SIZE); - - if (current_monitor->regname != NULL) - name = current_monitor->regname (regno); - else - name = current_monitor->regnames[regno]; - monitor_debug ("MON fetchreg %d '%s'\n", regno, name ? name : "(null name)"); - - if (!name || (*name == '\0')) - { - monitor_debug ("No register known for %d\n", regno); - regcache_raw_supply (regcache, regno, zerobuf); - return; - } - - /* Send the register examine command. */ - - monitor_printf (current_monitor->getreg.cmd, name); - - /* If RESP_DELIM is specified, we search for that as a leading - delimiter for the register value. Otherwise, we just start - searching from the start of the buf. */ - - if (current_monitor->getreg.resp_delim) - { - monitor_debug ("EXP getreg.resp_delim\n"); - monitor_expect (current_monitor->getreg.resp_delim, NULL, 0); - /* Handle case of first 32 registers listed in pairs. */ - if (current_monitor->flags & MO_32_REGS_PAIRED - && (regno & 1) != 0 && regno < 32) - { - monitor_debug ("EXP getreg.resp_delim\n"); - monitor_expect (current_monitor->getreg.resp_delim, NULL, 0); - } - } - - /* Skip leading spaces and "0x" if MO_HEX_PREFIX flag is set. */ - if (current_monitor->flags & MO_HEX_PREFIX) - { - int c; - - c = readchar (timeout); - while (c == ' ') - c = readchar (timeout); - if ((c == '0') && ((c = readchar (timeout)) == 'x')) - ; - else - error (_("Bad value returned from monitor " - "while fetching register %x."), - regno); - } - - /* Read upto the maximum number of hex digits for this register, skipping - spaces, but stop reading if something else is seen. Some monitors - like to drop leading zeros. */ - - for (i = 0; i < register_size (get_regcache_arch (regcache), regno) * 2; i++) - { - int c; - - c = readchar (timeout); - while (c == ' ') - c = readchar (timeout); - - if (!isxdigit (c)) - break; - - regbuf[i] = c; - } - - regbuf[i] = '\000'; /* Terminate the number. */ - monitor_debug ("REGVAL '%s'\n", regbuf); - - /* If TERM is present, we wait for that to show up. Also, (if TERM - is present), we will send TERM_CMD if that is present. In any - case, we collect all of the output into buf, and then wait for - the normal prompt. */ - - if (current_monitor->getreg.term) - { - monitor_debug ("EXP getreg.term\n"); - monitor_expect (current_monitor->getreg.term, NULL, 0); /* Get - response. */ - } - - if (current_monitor->getreg.term_cmd) - { - monitor_debug ("EMIT getreg.term.cmd\n"); - monitor_printf (current_monitor->getreg.term_cmd); - } - if (!current_monitor->getreg.term || /* Already expected or */ - current_monitor->getreg.term_cmd) /* ack expected. */ - monitor_expect_prompt (NULL, 0); /* Get response. */ - - monitor_supply_register (regcache, regno, regbuf); -} - -/* Sometimes, it takes several commands to dump the registers. */ -/* This is a primitive for use by variations of monitor interfaces in - case they need to compose the operation. */ - -int -monitor_dump_reg_block (struct regcache *regcache, char *block_cmd) -{ - char buf[TARGET_BUF_SIZE]; - int resp_len; - - monitor_printf (block_cmd); - resp_len = monitor_expect_prompt (buf, sizeof (buf)); - parse_register_dump (regcache, buf, resp_len); - return 1; -} - - -/* Read the remote registers into the block regs. */ -/* Call the specific function if it has been provided. */ - -static void -monitor_dump_regs (struct regcache *regcache) -{ - char buf[TARGET_BUF_SIZE]; - int resp_len; - - if (current_monitor->dumpregs) - (*(current_monitor->dumpregs)) (regcache); /* Call supplied function. */ - else if (current_monitor->dump_registers) /* Default version. */ - { - monitor_printf (current_monitor->dump_registers); - resp_len = monitor_expect_prompt (buf, sizeof (buf)); - parse_register_dump (regcache, buf, resp_len); - } - else - /* Need some way to read registers. */ - internal_error (__FILE__, __LINE__, - _("failed internal consistency check")); -} - -static void -monitor_fetch_registers (struct target_ops *ops, - struct regcache *regcache, int regno) -{ - monitor_debug ("MON fetchregs\n"); - if (current_monitor->getreg.cmd) - { - if (regno >= 0) - { - monitor_fetch_register (regcache, regno); - return; - } - - for (regno = 0; regno < gdbarch_num_regs (get_regcache_arch (regcache)); - regno++) - monitor_fetch_register (regcache, regno); - } - else - { - monitor_dump_regs (regcache); - } -} - -/* Store register REGNO, or all if REGNO == 0. Return errno value. */ - -static void -monitor_store_register (struct regcache *regcache, int regno) -{ - int reg_size = register_size (get_regcache_arch (regcache), regno); - const char *name; - ULONGEST val; - - if (current_monitor->regname != NULL) - name = current_monitor->regname (regno); - else - name = current_monitor->regnames[regno]; - - if (!name || (*name == '\0')) - { - monitor_debug ("MON Cannot store unknown register\n"); - return; - } - - regcache_cooked_read_unsigned (regcache, regno, &val); - monitor_debug ("MON storeg %d %s\n", regno, phex (val, reg_size)); - - /* Send the register deposit command. */ - - if (current_monitor->flags & MO_REGISTER_VALUE_FIRST) - monitor_printf (current_monitor->setreg.cmd, val, name); - else if (current_monitor->flags & MO_SETREG_INTERACTIVE) - monitor_printf (current_monitor->setreg.cmd, name); - else - monitor_printf (current_monitor->setreg.cmd, name, val); - - if (current_monitor->setreg.resp_delim) - { - monitor_debug ("EXP setreg.resp_delim\n"); - monitor_expect_regexp (&setreg_resp_delim_pattern, NULL, 0); - if (current_monitor->flags & MO_SETREG_INTERACTIVE) - monitor_printf ("%s\r", phex_nz (val, reg_size)); - } - if (current_monitor->setreg.term) - { - monitor_debug ("EXP setreg.term\n"); - monitor_expect (current_monitor->setreg.term, NULL, 0); - if (current_monitor->flags & MO_SETREG_INTERACTIVE) - monitor_printf ("%s\r", phex_nz (val, reg_size)); - monitor_expect_prompt (NULL, 0); - } - else - monitor_expect_prompt (NULL, 0); - if (current_monitor->setreg.term_cmd) /* Mode exit required. */ - { - monitor_debug ("EXP setreg_termcmd\n"); - monitor_printf ("%s", current_monitor->setreg.term_cmd); - monitor_expect_prompt (NULL, 0); - } -} /* monitor_store_register */ - -/* Store the remote registers. */ - -static void -monitor_store_registers (struct target_ops *ops, - struct regcache *regcache, int regno) -{ - if (regno >= 0) - { - monitor_store_register (regcache, regno); - return; - } - - for (regno = 0; regno < gdbarch_num_regs (get_regcache_arch (regcache)); - regno++) - monitor_store_register (regcache, regno); -} - -/* Get ready to modify the registers array. On machines which store - individual registers, this doesn't need to do anything. On machines - which store all the registers in one fell swoop, this makes sure - that registers contains all the registers from the program being - debugged. */ - -static void -monitor_prepare_to_store (struct target_ops *self, struct regcache *regcache) -{ - /* Do nothing, since we can store individual regs. */ -} - -static void -monitor_files_info (struct target_ops *ops) -{ - printf_unfiltered (_("\tAttached to %s at %d baud.\n"), dev_name, baud_rate); -} - -static int -monitor_write_memory (CORE_ADDR memaddr, const gdb_byte *myaddr, int len) -{ - enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ()); - unsigned int val, hostval; - char *cmd; - int i; - - monitor_debug ("MON write %d %s\n", len, paddress (target_gdbarch (), memaddr)); - - if (current_monitor->flags & MO_ADDR_BITS_REMOVE) - memaddr = gdbarch_addr_bits_remove (target_gdbarch (), memaddr); - - /* Use memory fill command for leading 0 bytes. */ - - if (current_monitor->fill) - { - for (i = 0; i < len; i++) - if (myaddr[i] != 0) - break; - - if (i > 4) /* More than 4 zeros is worth doing. */ - { - monitor_debug ("MON FILL %d\n", i); - if (current_monitor->flags & MO_FILL_USES_ADDR) - monitor_printf (current_monitor->fill, memaddr, - (memaddr + i) - 1, 0); - else - monitor_printf (current_monitor->fill, memaddr, i, 0); - - monitor_expect_prompt (NULL, 0); - - return i; - } - } - -#if 0 - /* Can't actually use long longs if VAL is an int (nice idea, though). */ - if ((memaddr & 0x7) == 0 && len >= 8 && current_monitor->setmem.cmdll) - { - len = 8; - cmd = current_monitor->setmem.cmdll; - } - else -#endif - if ((memaddr & 0x3) == 0 && len >= 4 && current_monitor->setmem.cmdl) - { - len = 4; - cmd = current_monitor->setmem.cmdl; - } - else if ((memaddr & 0x1) == 0 && len >= 2 && current_monitor->setmem.cmdw) - { - len = 2; - cmd = current_monitor->setmem.cmdw; - } - else - { - len = 1; - cmd = current_monitor->setmem.cmdb; - } - - val = extract_unsigned_integer (myaddr, len, byte_order); - - if (len == 4) - { - hostval = *(unsigned int *) myaddr; - monitor_debug ("Hostval(%08x) val(%08x)\n", hostval, val); - } - - - if (current_monitor->flags & MO_NO_ECHO_ON_SETMEM) - monitor_printf_noecho (cmd, memaddr, val); - else if (current_monitor->flags & MO_SETMEM_INTERACTIVE) - { - monitor_printf_noecho (cmd, memaddr); - - if (current_monitor->setmem.resp_delim) - { - monitor_debug ("EXP setmem.resp_delim"); - monitor_expect_regexp (&setmem_resp_delim_pattern, NULL, 0); - monitor_printf ("%x\r", val); - } - if (current_monitor->setmem.term) - { - monitor_debug ("EXP setmem.term"); - monitor_expect (current_monitor->setmem.term, NULL, 0); - monitor_printf ("%x\r", val); - } - if (current_monitor->setmem.term_cmd) - { /* Emit this to get out of the memory editing state. */ - monitor_printf ("%s", current_monitor->setmem.term_cmd); - /* Drop through to expecting a prompt. */ - } - } - else - monitor_printf (cmd, memaddr, val); - - monitor_expect_prompt (NULL, 0); - - return len; -} - - -static int -monitor_write_memory_bytes (CORE_ADDR memaddr, const gdb_byte *myaddr, int len) -{ - unsigned char val; - int written = 0; - - if (len == 0) - return 0; - /* Enter the sub mode. */ - monitor_printf (current_monitor->setmem.cmdb, memaddr); - monitor_expect_prompt (NULL, 0); - while (len) - { - val = *myaddr; - monitor_printf ("%x\r", val); - myaddr++; - memaddr++; - written++; - /* If we wanted to, here we could validate the address. */ - monitor_expect_prompt (NULL, 0); - len--; - } - /* Now exit the sub mode. */ - monitor_printf (current_monitor->getreg.term_cmd); - monitor_expect_prompt (NULL, 0); - return written; -} - - -static void -longlongendswap (unsigned char *a) -{ - int i, j; - unsigned char x; - - i = 0; - j = 7; - while (i < 4) - { - x = *(a + i); - *(a + i) = *(a + j); - *(a + j) = x; - i++, j--; - } -} -/* Format 32 chars of long long value, advance the pointer. */ -static char *hexlate = "0123456789abcdef"; -static char * -longlong_hexchars (unsigned long long value, - char *outbuff) -{ - if (value == 0) - { - *outbuff++ = '0'; - return outbuff; - } - else - { - static unsigned char disbuf[8]; /* disassembly buffer */ - unsigned char *scan, *limit; /* loop controls */ - unsigned char c, nib; - int leadzero = 1; - - scan = disbuf; - limit = scan + 8; - { - unsigned long long *dp; - - dp = (unsigned long long *) scan; - *dp = value; - } - longlongendswap (disbuf); /* FIXME: ONly on big endian hosts. */ - while (scan < limit) - { - c = *scan++; /* A byte of our long long value. */ - if (leadzero) - { - if (c == 0) - continue; - else - leadzero = 0; /* Henceforth we print even zeroes. */ - } - nib = c >> 4; /* high nibble bits */ - *outbuff++ = hexlate[nib]; - nib = c & 0x0f; /* low nibble bits */ - *outbuff++ = hexlate[nib]; - } - return outbuff; - } -} /* longlong_hexchars */ - - - -/* I am only going to call this when writing virtual byte streams. - Which possably entails endian conversions. */ - -static int -monitor_write_memory_longlongs (CORE_ADDR memaddr, const gdb_byte *myaddr, int len) -{ - static char hexstage[20]; /* At least 16 digits required, plus null. */ - char *endstring; - long long *llptr; - long long value; - int written = 0; - - llptr = (long long *) myaddr; - if (len == 0) - return 0; - monitor_printf (current_monitor->setmem.cmdll, memaddr); - monitor_expect_prompt (NULL, 0); - while (len >= 8) - { - value = *llptr; - endstring = longlong_hexchars (*llptr, hexstage); - *endstring = '\0'; /* NUll terminate for printf. */ - monitor_printf ("%s\r", hexstage); - llptr++; - memaddr += 8; - written += 8; - /* If we wanted to, here we could validate the address. */ - monitor_expect_prompt (NULL, 0); - len -= 8; - } - /* Now exit the sub mode. */ - monitor_printf (current_monitor->getreg.term_cmd); - monitor_expect_prompt (NULL, 0); - return written; -} /* */ - - - -/* ----- MONITOR_WRITE_MEMORY_BLOCK ---------------------------- */ -/* This is for the large blocks of memory which may occur in downloading. - And for monitors which use interactive entry, - And for monitors which do not have other downloading methods. - Without this, we will end up calling monitor_write_memory many times - and do the entry and exit of the sub mode many times - This currently assumes... - MO_SETMEM_INTERACTIVE - ! MO_NO_ECHO_ON_SETMEM - To use this, the you have to patch the monitor_cmds block with - this function. Otherwise, its not tuned up for use by all - monitor variations. */ - -static int -monitor_write_memory_block (CORE_ADDR memaddr, const gdb_byte *myaddr, int len) -{ - int written; - - written = 0; - /* FIXME: This would be a good place to put the zero test. */ -#if 1 - if ((len > 8) && (((len & 0x07)) == 0) && current_monitor->setmem.cmdll) - { - return monitor_write_memory_longlongs (memaddr, myaddr, len); - } -#endif - written = monitor_write_memory_bytes (memaddr, myaddr, len); - return written; -} - -/* This is an alternate form of monitor_read_memory which is used for monitors - which can only read a single byte/word/etc. at a time. */ - -static int -monitor_read_memory_single (CORE_ADDR memaddr, gdb_byte *myaddr, int len) -{ - enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ()); - unsigned int val; - char membuf[sizeof (int) * 2 + 1]; - char *p; - char *cmd; - - monitor_debug ("MON read single\n"); -#if 0 - /* Can't actually use long longs (nice idea, though). In fact, the - call to strtoul below will fail if it tries to convert a value - that's too big to fit in a long. */ - if ((memaddr & 0x7) == 0 && len >= 8 && current_monitor->getmem.cmdll) - { - len = 8; - cmd = current_monitor->getmem.cmdll; - } - else -#endif - if ((memaddr & 0x3) == 0 && len >= 4 && current_monitor->getmem.cmdl) - { - len = 4; - cmd = current_monitor->getmem.cmdl; - } - else if ((memaddr & 0x1) == 0 && len >= 2 && current_monitor->getmem.cmdw) - { - len = 2; - cmd = current_monitor->getmem.cmdw; - } - else - { - len = 1; - cmd = current_monitor->getmem.cmdb; - } - - /* Send the examine command. */ - - monitor_printf (cmd, memaddr); - - /* If RESP_DELIM is specified, we search for that as a leading - delimiter for the memory value. Otherwise, we just start - searching from the start of the buf. */ - - if (current_monitor->getmem.resp_delim) - { - monitor_debug ("EXP getmem.resp_delim\n"); - monitor_expect_regexp (&getmem_resp_delim_pattern, NULL, 0); - } - - /* Now, read the appropriate number of hex digits for this loc, - skipping spaces. */ - - /* Skip leading spaces and "0x" if MO_HEX_PREFIX flag is set. */ - if (current_monitor->flags & MO_HEX_PREFIX) - { - int c; - - c = readchar (timeout); - while (c == ' ') - c = readchar (timeout); - if ((c == '0') && ((c = readchar (timeout)) == 'x')) - ; - else - monitor_error ("monitor_read_memory_single", - "bad response from monitor", - memaddr, 0, NULL, 0); - } - - { - int i; - - for (i = 0; i < len * 2; i++) - { - int c; - - while (1) - { - c = readchar (timeout); - if (isxdigit (c)) - break; - if (c == ' ') - continue; - - monitor_error ("monitor_read_memory_single", - "bad response from monitor", - memaddr, i, membuf, 0); - } - membuf[i] = c; - } - membuf[i] = '\000'; /* Terminate the number. */ - } - -/* If TERM is present, we wait for that to show up. Also, (if TERM is - present), we will send TERM_CMD if that is present. In any case, we collect - all of the output into buf, and then wait for the normal prompt. */ - - if (current_monitor->getmem.term) - { - monitor_expect (current_monitor->getmem.term, NULL, 0); /* Get - response. */ - - if (current_monitor->getmem.term_cmd) - { - monitor_printf (current_monitor->getmem.term_cmd); - monitor_expect_prompt (NULL, 0); - } - } - else - monitor_expect_prompt (NULL, 0); /* Get response. */ - - p = membuf; - val = strtoul (membuf, &p, 16); - - if (val == 0 && membuf == p) - monitor_error ("monitor_read_memory_single", - "bad value from monitor", - memaddr, 0, membuf, 0); - - /* supply register stores in target byte order, so swap here. */ - - store_unsigned_integer (myaddr, len, byte_order, val); - - return len; -} - -/* Copy LEN bytes of data from debugger memory at MYADDR to inferior's - memory at MEMADDR. Returns length moved. Currently, we do no more - than 16 bytes at a time. */ - -static int -monitor_read_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len) -{ - unsigned int val; - char buf[512]; - char *p, *p1; - int resp_len; - int i; - CORE_ADDR dumpaddr; - - if (len <= 0) - { - monitor_debug ("Zero length call to monitor_read_memory\n"); - return 0; - } - - monitor_debug ("MON read block ta(%s) ha(%s) %d\n", - paddress (target_gdbarch (), memaddr), - host_address_to_string (myaddr), len); - - if (current_monitor->flags & MO_ADDR_BITS_REMOVE) - memaddr = gdbarch_addr_bits_remove (target_gdbarch (), memaddr); - - if (current_monitor->flags & MO_GETMEM_READ_SINGLE) - return monitor_read_memory_single (memaddr, myaddr, len); - - len = min (len, 16); - - /* Some dumpers align the first data with the preceding 16 - byte boundary. Some print blanks and start at the - requested boundary. EXACT_DUMPADDR */ - - dumpaddr = (current_monitor->flags & MO_EXACT_DUMPADDR) - ? memaddr : memaddr & ~0x0f; - - /* See if xfer would cross a 16 byte boundary. If so, clip it. */ - if (((memaddr ^ (memaddr + len - 1)) & ~0xf) != 0) - len = ((memaddr + len) & ~0xf) - memaddr; - - /* Send the memory examine command. */ - - if (current_monitor->flags & MO_GETMEM_NEEDS_RANGE) - monitor_printf (current_monitor->getmem.cmdb, memaddr, memaddr + len); - else if (current_monitor->flags & MO_GETMEM_16_BOUNDARY) - monitor_printf (current_monitor->getmem.cmdb, dumpaddr); - else - monitor_printf (current_monitor->getmem.cmdb, memaddr, len); - - /* If TERM is present, we wait for that to show up. Also, (if TERM - is present), we will send TERM_CMD if that is present. In any - case, we collect all of the output into buf, and then wait for - the normal prompt. */ - - if (current_monitor->getmem.term) - { - resp_len = monitor_expect (current_monitor->getmem.term, - buf, sizeof buf); /* Get response. */ - - if (resp_len <= 0) - monitor_error ("monitor_read_memory", - "excessive response from monitor", - memaddr, resp_len, buf, 0); - - if (current_monitor->getmem.term_cmd) - { - serial_write (monitor_desc, current_monitor->getmem.term_cmd, - strlen (current_monitor->getmem.term_cmd)); - monitor_expect_prompt (NULL, 0); - } - } - else - resp_len = monitor_expect_prompt (buf, sizeof buf); /* Get response. */ - - p = buf; - - /* If RESP_DELIM is specified, we search for that as a leading - delimiter for the values. Otherwise, we just start searching - from the start of the buf. */ - - if (current_monitor->getmem.resp_delim) - { - int retval, tmp; - struct re_registers resp_strings; - - monitor_debug ("MON getmem.resp_delim %s\n", - current_monitor->getmem.resp_delim); - - memset (&resp_strings, 0, sizeof (struct re_registers)); - tmp = strlen (p); - retval = re_search (&getmem_resp_delim_pattern, p, tmp, 0, tmp, - &resp_strings); - - if (retval < 0) - monitor_error ("monitor_read_memory", - "bad response from monitor", - memaddr, resp_len, buf, 0); - - p += resp_strings.end[0]; -#if 0 - p = strstr (p, current_monitor->getmem.resp_delim); - if (!p) - monitor_error ("monitor_read_memory", - "bad response from monitor", - memaddr, resp_len, buf, 0); - p += strlen (current_monitor->getmem.resp_delim); -#endif - } - monitor_debug ("MON scanning %d ,%s '%s'\n", len, - host_address_to_string (p), p); - if (current_monitor->flags & MO_GETMEM_16_BOUNDARY) - { - char c; - int fetched = 0; - i = len; - c = *p; - - - while (!(c == '\000' || c == '\n' || c == '\r') && i > 0) - { - if (isxdigit (c)) - { - if ((dumpaddr >= memaddr) && (i > 0)) - { - val = fromhex (c) * 16 + fromhex (*(p + 1)); - *myaddr++ = val; - if (monitor_debug_p || remote_debug) - fprintf_unfiltered (gdb_stdlog, "[%02x]", val); - --i; - fetched++; - } - ++dumpaddr; - ++p; - } - ++p; /* Skip a blank or other non hex char. */ - c = *p; - } - if (fetched == 0) - error (_("Failed to read via monitor")); - if (monitor_debug_p || remote_debug) - fprintf_unfiltered (gdb_stdlog, "\n"); - return fetched; /* Return the number of bytes actually - read. */ - } - monitor_debug ("MON scanning bytes\n"); - - for (i = len; i > 0; i--) - { - /* Skip non-hex chars, but bomb on end of string and newlines. */ - - while (1) - { - if (isxdigit (*p)) - break; - - if (*p == '\000' || *p == '\n' || *p == '\r') - monitor_error ("monitor_read_memory", - "badly terminated response from monitor", - memaddr, resp_len, buf, 0); - p++; - } - - val = strtoul (p, &p1, 16); - - if (val == 0 && p == p1) - monitor_error ("monitor_read_memory", - "bad value from monitor", - memaddr, resp_len, buf, 0); - - *myaddr++ = val; - - if (i == 1) - break; - - p = p1; - } - - return len; -} - -/* Helper for monitor_xfer_partial that handles memory transfers. - Arguments are like target_xfer_partial. */ - -static enum target_xfer_status -monitor_xfer_memory (gdb_byte *readbuf, const gdb_byte *writebuf, - ULONGEST memaddr, ULONGEST len, ULONGEST *xfered_len) -{ - int res; - - if (writebuf != NULL) - { - if (current_monitor->flags & MO_HAS_BLOCKWRITES) - res = monitor_write_memory_block (memaddr, writebuf, len); - else - res = monitor_write_memory (memaddr, writebuf, len); - } - else - { - res = monitor_read_memory (memaddr, readbuf, len); - } - - if (res <= 0) - return TARGET_XFER_E_IO; - else - { - *xfered_len = (ULONGEST) res; - return TARGET_XFER_OK; - } -} - -/* Target to_xfer_partial implementation. */ - -static enum target_xfer_status -monitor_xfer_partial (struct target_ops *ops, enum target_object object, - const char *annex, gdb_byte *readbuf, - const gdb_byte *writebuf, ULONGEST offset, ULONGEST len, - ULONGEST *xfered_len) -{ - switch (object) - { - case TARGET_OBJECT_MEMORY: - return monitor_xfer_memory (readbuf, writebuf, offset, len, xfered_len); - - default: - return TARGET_XFER_E_IO; - } -} - -static void -monitor_kill (struct target_ops *ops) -{ - return; /* Ignore attempts to kill target system. */ -} - -/* All we actually do is set the PC to the start address of exec_bfd. */ - -static void -monitor_create_inferior (struct target_ops *ops, char *exec_file, - char *args, char **env, int from_tty) -{ - if (args && (*args != '\000')) - error (_("Args are not supported by the monitor.")); - - first_time = 1; - clear_proceed_status (0); - regcache_write_pc (get_current_regcache (), - bfd_get_start_address (exec_bfd)); -} - -/* Clean up when a program exits. - The program actually lives on in the remote processor's RAM, and may be - run again without a download. Don't leave it full of breakpoint - instructions. */ - -static void -monitor_mourn_inferior (struct target_ops *ops) -{ - unpush_target (targ_ops); - generic_mourn_inferior (); /* Do all the proper things now. */ - delete_thread_silent (monitor_ptid); -} - -/* Tell the monitor to add a breakpoint. */ - -static int -monitor_insert_breakpoint (struct target_ops *ops, struct gdbarch *gdbarch, - struct bp_target_info *bp_tgt) -{ - CORE_ADDR addr = bp_tgt->placed_address = bp_tgt->reqstd_address; - int i; - int bplen; - - monitor_debug ("MON inst bkpt %s\n", paddress (gdbarch, addr)); - if (current_monitor->set_break == NULL) - error (_("No set_break defined for this monitor")); - - if (current_monitor->flags & MO_ADDR_BITS_REMOVE) - addr = gdbarch_addr_bits_remove (gdbarch, addr); - - /* Determine appropriate breakpoint size for this address. */ - gdbarch_breakpoint_from_pc (gdbarch, &addr, &bplen); - bp_tgt->placed_address = addr; - bp_tgt->placed_size = bplen; - - for (i = 0; i < current_monitor->num_breakpoints; i++) - { - if (breakaddr[i] == 0) - { - breakaddr[i] = addr; - monitor_printf (current_monitor->set_break, addr); - monitor_expect_prompt (NULL, 0); - return 0; - } - } - - error (_("Too many breakpoints (> %d) for monitor."), - current_monitor->num_breakpoints); -} - -/* Tell the monitor to remove a breakpoint. */ - -static int -monitor_remove_breakpoint (struct target_ops *ops, struct gdbarch *gdbarch, - struct bp_target_info *bp_tgt) -{ - CORE_ADDR addr = bp_tgt->placed_address; - int i; - - monitor_debug ("MON rmbkpt %s\n", paddress (gdbarch, addr)); - if (current_monitor->clr_break == NULL) - error (_("No clr_break defined for this monitor")); - - for (i = 0; i < current_monitor->num_breakpoints; i++) - { - if (breakaddr[i] == addr) - { - breakaddr[i] = 0; - /* Some monitors remove breakpoints based on the address. */ - if (current_monitor->flags & MO_CLR_BREAK_USES_ADDR) - monitor_printf (current_monitor->clr_break, addr); - else if (current_monitor->flags & MO_CLR_BREAK_1_BASED) - monitor_printf (current_monitor->clr_break, i + 1); - else - monitor_printf (current_monitor->clr_break, i); - monitor_expect_prompt (NULL, 0); - return 0; - } - } - fprintf_unfiltered (gdb_stderr, - "Can't find breakpoint associated with %s\n", - paddress (gdbarch, addr)); - return 1; -} - -/* monitor_wait_srec_ack -- wait for the target to send an acknowledgement for - an S-record. Return non-zero if the ACK is received properly. */ - -static int -monitor_wait_srec_ack (void) -{ - int ch; - - if (current_monitor->flags & MO_SREC_ACK_PLUS) - { - return (readchar (timeout) == '+'); - } - else if (current_monitor->flags & MO_SREC_ACK_ROTATE) - { - /* Eat two backspaces, a "rotating" char (|/-\), and a space. */ - if ((ch = readchar (1)) < 0) - return 0; - if ((ch = readchar (1)) < 0) - return 0; - if ((ch = readchar (1)) < 0) - return 0; - if ((ch = readchar (1)) < 0) - return 0; - } - return 1; -} - -/* monitor_load -- download a file. */ - -static void -monitor_load (struct target_ops *self, const char *args, int from_tty) -{ - CORE_ADDR load_offset = 0; - char **argv; - struct cleanup *old_cleanups; - char *filename; - - monitor_debug ("MON load\n"); - - if (args == NULL) - error_no_arg (_("file to load")); - - argv = gdb_buildargv (args); - old_cleanups = make_cleanup_freeargv (argv); - - filename = tilde_expand (argv[0]); - make_cleanup (xfree, filename); - - /* Enable user to specify address for downloading as 2nd arg to load. */ - if (argv[1] != NULL) - { - const char *endptr; - - load_offset = strtoulst (argv[1], &endptr, 0); - - /* If the last word was not a valid number then - treat it as a file name with spaces in. */ - if (argv[1] == endptr) - error (_("Invalid download offset:%s."), argv[1]); - - if (argv[2] != NULL) - error (_("Too many parameters.")); - } - - monitor_printf (current_monitor->load); - if (current_monitor->loadresp) - monitor_expect (current_monitor->loadresp, NULL, 0); - - load_srec (monitor_desc, filename, load_offset, - 32, SREC_ALL, hashmark, - current_monitor->flags & MO_SREC_ACK ? - monitor_wait_srec_ack : NULL); - - monitor_expect_prompt (NULL, 0); - - do_cleanups (old_cleanups); - - /* Finally, make the PC point at the start address. */ - if (exec_bfd) - regcache_write_pc (get_current_regcache (), - bfd_get_start_address (exec_bfd)); - - /* There used to be code here which would clear inferior_ptid and - call clear_symtab_users. None of that should be necessary: - monitor targets should behave like remote protocol targets, and - since generic_load does none of those things, this function - shouldn't either. - - Furthermore, clearing inferior_ptid is *incorrect*. After doing - a load, we still have a valid connection to the monitor, with a - live processor state to fiddle with. The user can type - `continue' or `jump *start' and make the program run. If they do - these things, however, GDB will be talking to a running program - while inferior_ptid is null_ptid; this makes things like - reinit_frame_cache very confused. */ -} - -static void -monitor_stop (struct target_ops *self, ptid_t ptid) -{ - monitor_debug ("MON stop\n"); - if ((current_monitor->flags & MO_SEND_BREAK_ON_STOP) != 0) - serial_send_break (monitor_desc); - if (current_monitor->stop) - monitor_printf_noecho (current_monitor->stop); -} - -/* Put a COMMAND string out to MONITOR. Output from MONITOR is placed - in OUTPUT until the prompt is seen. FIXME: We read the characters - ourseleves here cause of a nasty echo. */ - -static void -monitor_rcmd (struct target_ops *self, const char *command, - struct ui_file *outbuf) -{ - char *p; - int resp_len; - char buf[1000]; - - if (monitor_desc == NULL) - error (_("monitor target not open.")); - - p = current_monitor->prompt; - - /* Send the command. Note that if no args were supplied, then we're - just sending the monitor a newline, which is sometimes useful. */ - - monitor_printf ("%s\r", (command ? command : "")); - - resp_len = monitor_expect_prompt (buf, sizeof buf); - - fputs_unfiltered (buf, outbuf); /* Output the response. */ -} - -/* Convert hex digit A to a number. */ - -#if 0 -static int -from_hex (int a) -{ - if (a >= '0' && a <= '9') - return a - '0'; - if (a >= 'a' && a <= 'f') - return a - 'a' + 10; - if (a >= 'A' && a <= 'F') - return a - 'A' + 10; - - error (_("Reply contains invalid hex digit 0x%x"), a); -} -#endif - -char * -monitor_get_dev_name (void) -{ - return dev_name; -} - -/* Check to see if a thread is still alive. */ - -static int -monitor_thread_alive (struct target_ops *ops, ptid_t ptid) -{ - if (ptid_equal (ptid, monitor_ptid)) - /* The monitor's task is always alive. */ - return 1; - - return 0; -} - -/* Convert a thread ID to a string. Returns the string in a static - buffer. */ - -static char * -monitor_pid_to_str (struct target_ops *ops, ptid_t ptid) -{ - static char buf[64]; - - if (ptid_equal (monitor_ptid, ptid)) - { - xsnprintf (buf, sizeof buf, "Thread
"); - return buf; - } - - return normal_pid_to_str (ptid); -} - -static struct target_ops monitor_ops; - -static void -init_base_monitor_ops (void) -{ - monitor_ops.to_close = monitor_close; - monitor_ops.to_detach = monitor_detach; - monitor_ops.to_resume = monitor_resume; - monitor_ops.to_wait = monitor_wait; - monitor_ops.to_fetch_registers = monitor_fetch_registers; - monitor_ops.to_store_registers = monitor_store_registers; - monitor_ops.to_prepare_to_store = monitor_prepare_to_store; - monitor_ops.to_xfer_partial = monitor_xfer_partial; - monitor_ops.to_files_info = monitor_files_info; - monitor_ops.to_insert_breakpoint = monitor_insert_breakpoint; - monitor_ops.to_remove_breakpoint = monitor_remove_breakpoint; - monitor_ops.to_kill = monitor_kill; - monitor_ops.to_load = monitor_load; - monitor_ops.to_create_inferior = monitor_create_inferior; - monitor_ops.to_mourn_inferior = monitor_mourn_inferior; - monitor_ops.to_stop = monitor_stop; - monitor_ops.to_rcmd = monitor_rcmd; - monitor_ops.to_log_command = serial_log_command; - monitor_ops.to_thread_alive = monitor_thread_alive; - monitor_ops.to_pid_to_str = monitor_pid_to_str; - monitor_ops.to_stratum = process_stratum; - monitor_ops.to_has_all_memory = default_child_has_all_memory; - monitor_ops.to_has_memory = default_child_has_memory; - monitor_ops.to_has_stack = default_child_has_stack; - monitor_ops.to_has_registers = default_child_has_registers; - monitor_ops.to_has_execution = default_child_has_execution; - monitor_ops.to_magic = OPS_MAGIC; -} /* init_base_monitor_ops */ - -/* Init the target_ops structure pointed at by OPS. */ - -void -init_monitor_ops (struct target_ops *ops) -{ - if (monitor_ops.to_magic != OPS_MAGIC) - init_base_monitor_ops (); - - memcpy (ops, &monitor_ops, sizeof monitor_ops); -} - -/* Define additional commands that are usually only used by monitors. */ - -/* -Wmissing-prototypes */ -extern initialize_file_ftype _initialize_remote_monitors; - -void -_initialize_remote_monitors (void) -{ - init_base_monitor_ops (); - add_setshow_boolean_cmd ("hash", no_class, &hashmark, _("\ -Set display of activity while downloading a file."), _("\ -Show display of activity while downloading a file."), _("\ -When enabled, a hashmark \'#\' is displayed."), - NULL, - NULL, /* FIXME: i18n: */ - &setlist, &showlist); - - add_setshow_zuinteger_cmd ("monitor", no_class, &monitor_debug_p, _("\ -Set debugging of remote monitor communication."), _("\ -Show debugging of remote monitor communication."), _("\ -When enabled, communication between GDB and the remote monitor\n\ -is displayed."), - NULL, - NULL, /* FIXME: i18n: */ - &setdebuglist, &showdebuglist); - - /* Yes, 42000 is arbitrary. The only sense out of it, is that it - isn't 0. */ - monitor_ptid = ptid_build (42000, 0, 42000); -} diff --git a/gdb/monitor.h b/gdb/monitor.h deleted file mode 100644 index cf720936e00..00000000000 --- a/gdb/monitor.h +++ /dev/null @@ -1,261 +0,0 @@ -/* Definitions for remote debugging interface for ROM monitors. - Copyright (C) 1990-2015 Free Software Foundation, Inc. - Contributed by Cygnus Support. Written by Rob Savoye for Cygnus. - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . */ - -#ifndef MONITOR_H -#define MONITOR_H - -struct target_waitstatus; -struct serial; - -/* This structure describes the strings necessary to give small command - sequences to the monitor, and parse the response. - - CMD is the actual command typed at the monitor. Usually this has - embedded sequences ala printf, which are substituted with the - arguments appropriate to that type of command. Ie: to examine a - register, we substitute the register name for the first arg. To - modify memory, we substitute the memory location and the new - contents for the first and second args, etc... - - RESP_DELIM used to home in on the response string, and is used to - disambiguate the answer within the pile of text returned by the - monitor. This should be a unique string that immediately precedes - the answer. Ie: if your monitor prints out `PC: 00000001= ' in - response to asking for the PC, you should use `: ' as the - RESP_DELIM. RESP_DELIM may be NULL if the res- ponse is going to - be ignored, or has no particular leading text. - - TERM is the string that the monitor outputs to indicate that it is - idle, and waiting for input. This is usually a prompt of some - sort. In the previous example, it would be `= '. It is important - that TERM really means that the monitor is idle, otherwise GDB may - try to type at it when it isn't ready for input. This is a problem - because many monitors cannot deal with type-ahead. TERM may be - NULL if the normal prompt is output. - - TERM_CMD is used to quit out of the subcommand mode and get back to - the main prompt. TERM_CMD may be NULL if it isn't necessary. It - will also be ignored if TERM is NULL. */ - -struct memrw_cmd - { - char *cmdb; /* Command to send for byte read/write */ - char *cmdw; /* Command for word (16 bit) read/write */ - char *cmdl; /* Command for long (32 bit) read/write */ - char *cmdll; /* Command for long long (64 bit) read/write */ - char *resp_delim; /* String just prior to the desired value */ - char *term; /* Terminating string to search for */ - char *term_cmd; /* String to get out of sub-mode (if - necessary) */ - }; - -struct regrw_cmd - { - char *cmd; /* Command to send for reg read/write */ - char *resp_delim; /* String (actually a regexp if getmem) just - prior to the desired value */ - char *term; /* Terminating string to search for */ - char *term_cmd; /* String to get out of sub-mode (if - necessary) */ - }; - -struct monitor_ops - { - int flags; /* See below */ - char **init; /* List of init commands. NULL terminated. */ - char *cont; /* continue command */ - char *step; /* single step */ - char *stop; /* Interrupt program string */ - char *set_break; /* set a breakpoint. If NULL, monitor - implementation sets its own - to_insert_breakpoint method. */ - char *clr_break; /* clear a breakpoint */ - char *clr_all_break; /* Clear all breakpoints */ - char *fill; /* Memory fill cmd (addr len val) */ - struct memrw_cmd setmem; /* set memory to a value */ - struct memrw_cmd getmem; /* display memory */ - struct regrw_cmd setreg; /* set a register */ - struct regrw_cmd getreg; /* get a register */ - /* Some commands can dump a bunch of registers - at once. This comes as a set of REG=VAL - pairs. This should be called for each pair - of registers that we can parse to supply - GDB with the value of a register. */ - char *dump_registers; /* Command to dump all regs at once */ - char *register_pattern; /* Pattern that picks out register - from reg dump */ - void (*supply_register) (struct regcache *regcache, char *name, - int namelen, char *val, int vallen); - int (*dumpregs) (struct regcache *); /* Dump all registers */ - int (*continue_hook) (void); /* Emit the continue command */ - int (*wait_filter) (char *buf, /* Maybe contains registers */ - int bufmax, - int *response_length, - struct target_waitstatus * status); - char *load; /* load command */ - char *loadresp; /* Response to load command */ - char *prompt; /* monitor command prompt */ - char *line_term; /* end-of-command delimitor */ - char *cmd_end; /* optional command terminator */ - struct target_ops *target; /* target operations */ - int stopbits; /* number of stop bits */ - char **regnames; /* array of register names in ascii */ - /* deprecated: use regname instead */ - const char *(*regname) (int index); - /* function for dynamic regname array */ - int num_breakpoints; /* If set_break != NULL, number of supported - breakpoints */ - int magic; /* Check value */ - }; - -/* The monitor ops magic number, used to detect if an ops structure doesn't - have the right number of entries filled in. */ - -#define MONITOR_OPS_MAGIC 600925 - -/* Flag definitions. */ - -/* If set, then clear breakpoint command uses address, otherwise it - uses an index returned by the monitor. */ - -#define MO_CLR_BREAK_USES_ADDR 0x1 - -/* If set, then memory fill command uses STARTADDR, ENDADDR+1, VALUE - as args, else it uses STARTADDR, LENGTH, VALUE as args. */ - -#define MO_FILL_USES_ADDR 0x2 - -/* If set, then monitor doesn't automatically supply register dump - when coming back after a continue. */ - -#define MO_NEED_REGDUMP_AFTER_CONT 0x4 - -/* getmem needs start addr and end addr. */ - -#define MO_GETMEM_NEEDS_RANGE 0x8 - -/* getmem can only read one loc at a time. */ - -#define MO_GETMEM_READ_SINGLE 0x10 - -/* handle \r\n combinations. */ - -#define MO_HANDLE_NL 0x20 - -/* don't expect echos in monitor_open. */ - -#define MO_NO_ECHO_ON_OPEN 0x40 - -/* If set, send break to stop monitor. */ - -#define MO_SEND_BREAK_ON_STOP 0x80 - -/* If set, target sends an ACK after each S-record. */ - -#define MO_SREC_ACK 0x100 - -/* Allow 0x prefix on addresses retured from monitor. */ - -#define MO_HEX_PREFIX 0x200 - -/* Some monitors require a different command when starting a program. */ - -#define MO_RUN_FIRST_TIME 0x400 - -/* Don't expect echos when getting memory */ - -#define MO_NO_ECHO_ON_SETMEM 0x800 - -/* If set, then register store command expects value BEFORE regname. */ - -#define MO_REGISTER_VALUE_FIRST 0x1000 - -/* If set, then the monitor displays registers as pairs. */ - -#define MO_32_REGS_PAIRED 0x2000 - -/* If set, then register setting happens interactively. */ - -#define MO_SETREG_INTERACTIVE 0x4000 - -/* If set, then memory setting happens interactively. */ - -#define MO_SETMEM_INTERACTIVE 0x8000 - -/* If set, then memory dumps are always on 16-byte boundaries, even - when less is desired. */ - -#define MO_GETMEM_16_BOUNDARY 0x10000 - -/* If set, then the monitor numbers its breakpoints starting from 1. */ - -#define MO_CLR_BREAK_1_BASED 0x20000 - -/* If set, then the monitor acks srecords with a plus sign. */ - -#define MO_SREC_ACK_PLUS 0x40000 - -/* If set, then the monitor "acks" srecords with rotating lines. */ - -#define MO_SREC_ACK_ROTATE 0x80000 - -/* If set, then remove useless address bits from memory addresses. */ - -#define MO_ADDR_BITS_REMOVE 0x100000 - -/* If set, then display target program output if prefixed by ^O. */ - -#define MO_PRINT_PROGRAM_OUTPUT 0x200000 - -/* Some dump bytes commands align the first data with the preceding - 16 byte boundary. Some print blanks and start at the exactly the - requested boundary. */ - -#define MO_EXACT_DUMPADDR 0x400000 - -/* Rather entering and exiting the write memory dialog for each word byte, - we can save time by transferring the whole block without exiting - the memory editing mode. You only need to worry about this - if you are doing memory downloading. - This engages a new write function registered with dcache. */ - -#define MO_HAS_BLOCKWRITES 0x800000 - -#define SREC_SIZE 160 - -extern void monitor_open (const char *args, struct monitor_ops *ops, - int from_tty); -extern void monitor_close (struct target_ops *self); -extern char *monitor_supply_register (struct regcache *regcache, - int regno, char *valstr); -extern int monitor_expect (char *prompt, char *buf, int buflen); -extern int monitor_expect_prompt (char *buf, int buflen); -/* Note: The variable argument functions monitor_printf and - monitor_printf_noecho vararg do not take take standard format style - arguments. Instead they take custom formats interpretered directly - by monitor_vsprintf. */ -extern void monitor_printf (char *, ...); -extern void monitor_printf_noecho (char *, ...); -extern void monitor_write (char *buf, int buflen); -extern int monitor_readchar (void); -extern char *monitor_get_dev_name (void); -extern void init_monitor_ops (struct target_ops *); -extern int monitor_dump_reg_block (struct regcache *regcache, char *dump_cmd); - -#endif diff --git a/gdb/ppcbug-rom.c b/gdb/ppcbug-rom.c deleted file mode 100644 index b1e22ccb29b..00000000000 --- a/gdb/ppcbug-rom.c +++ /dev/null @@ -1,224 +0,0 @@ -/* Remote debugging interface for PPCbug (PowerPC) Rom monitor - for GDB, the GNU debugger. - Copyright (C) 1995-2015 Free Software Foundation, Inc. - - Written by Stu Grossman of Cygnus Support - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . */ - -#include "defs.h" -#include "gdbcore.h" -#include "target.h" -#include "monitor.h" -#include "serial.h" -#include "regcache.h" - -static void -ppcbug_supply_register (struct regcache *regcache, char *regname, - int regnamelen, char *val, int vallen) -{ - int regno = 0; - - if (regnamelen < 2 || regnamelen > 4) - return; - - switch (regname[0]) - { - case 'R': - if (regname[1] < '0' || regname[1] > '9') - return; - if (regnamelen == 2) - regno = regname[1] - '0'; - else if (regnamelen == 3 && regname[2] >= '0' && regname[2] <= '9') - regno = (regname[1] - '0') * 10 + (regname[2] - '0'); - else - return; - break; - case 'F': - if (regname[1] != 'R' || regname[2] < '0' || regname[2] > '9') - return; - if (regnamelen == 3) - regno = 32 + regname[2] - '0'; - else if (regnamelen == 4 && regname[3] >= '0' && regname[3] <= '9') - regno = 32 + (regname[2] - '0') * 10 + (regname[3] - '0'); - else - return; - break; - case 'I': - if (regnamelen != 2 || regname[1] != 'P') - return; - regno = 64; - break; - case 'M': - if (regnamelen != 3 || regname[1] != 'S' || regname[2] != 'R') - return; - regno = 65; - break; - case 'C': - if (regnamelen != 2 || regname[1] != 'R') - return; - regno = 66; - break; - case 'S': - if (regnamelen != 4 || regname[1] != 'P' || regname[2] != 'R') - return; - else if (regname[3] == '8') - regno = 67; - else if (regname[3] == '9') - regno = 68; - else if (regname[3] == '1') - regno = 69; - else if (regname[3] == '0') - regno = 70; - else - return; - break; - default: - return; - } - - monitor_supply_register (regcache, regno, val); -} - -/* - * This array of registers needs to match the indexes used by GDB. The - * whole reason this exists is because the various ROM monitors use - * different names than GDB does, and don't support all the - * registers either. So, typing "info reg sp" becomes an "A7". - */ - -static char *ppcbug_regnames[] = -{ - "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", - "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", - "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", - "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31", - - "fr0", "fr1", "fr2", "fr3", "fr4", "fr5", "fr6", "fr7", - "fr8", "fr9", "fr10", "fr11", "fr12", "fr13", "fr14", "fr15", - "fr16", "fr17", "fr18", "fr19", "fr20", "fr21", "fr22", "fr23", - "fr24", "fr25", "fr26", "fr27", "fr28", "fr29", "fr30", "fr31", - -/* pc ps cnd lr cnt xer mq */ - "ip", "msr", "cr", "spr8", "spr9", "spr1", "spr0" -}; - -/* - * Define the monitor command strings. Since these are passed directly - * through to a printf style function, we need can include formatting - * strings. We also need a CR or LF on the end. - */ - -static struct target_ops ppcbug_ops0; -static struct target_ops ppcbug_ops1; - -static char *ppcbug_inits[] = -{"\r", NULL}; - -static void -init_ppc_cmds (char *LOAD_CMD, - struct monitor_ops *OPS, - struct target_ops *targops) -{ - OPS->flags = MO_CLR_BREAK_USES_ADDR | MO_HANDLE_NL; - OPS->init = ppcbug_inits; /* Init strings */ - OPS->cont = "g\r"; /* continue command */ - OPS->step = "t\r"; /* single step */ - OPS->stop = NULL; /* interrupt command */ - OPS->set_break = "br %x\r"; /* set a breakpoint */ - OPS->clr_break = "nobr %x\r"; /* clear a breakpoint */ - OPS->clr_all_break = "nobr\r"; /* clear all breakpoints */ - OPS->fill = "bf %x:%x %x;b\r"; /* fill (start count val) */ - OPS->setmem.cmdb = "ms %x %02x\r"; /* setmem.cmdb (addr, value) */ - OPS->setmem.cmdw = "ms %x %04x\r"; /* setmem.cmdw (addr, value) */ - OPS->setmem.cmdl = "ms %x %08x\r"; /* setmem.cmdl (addr, value) */ - OPS->setmem.cmdll = NULL; /* setmem.cmdll (addr, value) */ - OPS->setmem.resp_delim = NULL; /* setreg.resp_delim */ - OPS->setmem.term = NULL; /* setreg.term */ - OPS->setmem.term_cmd = NULL; /* setreg.term_cmd */ - OPS->getmem.cmdb = "md %x:%x;b\r"; /* getmem.cmdb (addr, len) */ - OPS->getmem.cmdw = "md %x:%x;b\r"; /* getmem.cmdw (addr, len) */ - OPS->getmem.cmdl = "md %x:%x;b\r"; /* getmem.cmdl (addr, len) */ - OPS->getmem.cmdll = NULL; /* getmem.cmdll (addr, len) */ - OPS->getmem.resp_delim = " "; /* getmem.resp_delim */ - OPS->getmem.term = NULL; /* getmem.term */ - OPS->getmem.term_cmd = NULL; /* getmem.term_cmd */ - OPS->setreg.cmd = "rs %s %x\r"; /* setreg.cmd (name, value) */ - OPS->setreg.resp_delim = NULL; /* setreg.resp_delim */ - OPS->setreg.term = NULL; /* setreg.term */ - OPS->setreg.term_cmd = NULL; /* setreg.term_cmd */ - OPS->getreg.cmd = "rs %s\r"; /* getreg.cmd (name) */ - OPS->getreg.resp_delim = "="; /* getreg.resp_delim */ - OPS->getreg.term = NULL; /* getreg.term */ - OPS->getreg.term_cmd = NULL; /* getreg.term_cmd */ - /* register_pattern */ - OPS->register_pattern = "\\(\\w+\\) +=\\([0-9a-fA-F]+\\b\\)"; - OPS->supply_register = ppcbug_supply_register; - OPS->dump_registers = "rd\r"; /* dump all registers */ - OPS->load = LOAD_CMD; /* download command */ - OPS->loadresp = NULL; /* load response */ - OPS->prompt = "PPC1-Bug>"; /* monitor command prompt */ - OPS->line_term = "\r"; /* end-of-line terminator */ - OPS->cmd_end = NULL; /* optional command terminator */ - OPS->target = targops; /* target operations */ - OPS->stopbits = SERIAL_1_STOPBITS; /* number of stop bits */ - OPS->regnames = ppcbug_regnames; /* registers names */ - OPS->magic = MONITOR_OPS_MAGIC; /* magic */ -} - - -static struct monitor_ops ppcbug_cmds0; -static struct monitor_ops ppcbug_cmds1; - -static void -ppcbug_open0 (const char *args, int from_tty) -{ - monitor_open (args, &ppcbug_cmds0, from_tty); -} - -static void -ppcbug_open1 (const char *args, int from_tty) -{ - monitor_open (args, &ppcbug_cmds1, from_tty); -} - -extern initialize_file_ftype _initialize_ppcbug_rom; /* -Wmissing-prototypes */ - -void -_initialize_ppcbug_rom (void) -{ - init_ppc_cmds ("lo 0\r", &ppcbug_cmds0, &ppcbug_ops0); - init_ppc_cmds ("lo 1\r", &ppcbug_cmds1, &ppcbug_ops1); - init_monitor_ops (&ppcbug_ops0); - - ppcbug_ops0.to_shortname = "ppcbug"; - ppcbug_ops0.to_longname = "PowerPC PPCBug monitor on port 0"; - ppcbug_ops0.to_doc = "Debug via the PowerPC PPCBug monitor using port 0.\n\ -Specify the serial device it is connected to (e.g. /dev/ttya)."; - ppcbug_ops0.to_open = ppcbug_open0; - - add_target (&ppcbug_ops0); - - init_monitor_ops (&ppcbug_ops1); - - ppcbug_ops1.to_shortname = "ppcbug1"; - ppcbug_ops1.to_longname = "PowerPC PPCBug monitor on port 1"; - ppcbug_ops1.to_doc = "Debug via the PowerPC PPCBug monitor using port 1.\n\ -Specify the serial device it is connected to (e.g. /dev/ttya)."; - ppcbug_ops1.to_open = ppcbug_open1; - - add_target (&ppcbug_ops1); -} diff --git a/gdb/srec.h b/gdb/srec.h deleted file mode 100644 index bef607fc296..00000000000 --- a/gdb/srec.h +++ /dev/null @@ -1,35 +0,0 @@ -/* S-record download support for GDB, the GNU debugger. - Copyright (C) 1995-2015 Free Software Foundation, Inc. - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . */ - -struct serial; - -void load_srec (struct serial *desc, const char *file, bfd_vma load_offset, - int maxrecsize, int flags, int hashmark, - int (*waitack) (void)); - -/* S-record capability flags */ - -/* Which record types are supported */ -#define SREC_2_BYTE_ADDR 0x00000001 -#define SREC_3_BYTE_ADDR 0x00000002 -#define SREC_4_BYTE_ADDR 0x00000004 -#define SREC_TERM_SHIFT 3 - -#define SREC_ALL (SREC_2_BYTE_ADDR | SREC_3_BYTE_ADDR | SREC_4_BYTE_ADDR \ - | ((SREC_2_BYTE_ADDR | SREC_3_BYTE_ADDR | SREC_4_BYTE_ADDR) \ - << SREC_TERM_SHIFT)) -- 2.30.2