From 51bc99a485730e563fee7571ec82f96eeb7b2139 Mon Sep 17 00:00:00 2001 From: Spenser Gilliland Date: Tue, 27 May 2014 16:15:32 -0500 Subject: [PATCH] configs: bump zedboard to 2014.1 Bump zedboard defconfig to version 2014.1. This makes it possible to use uboot-spl instead of the xilinx specific fsbl. However, the result is kinda hacky due to the licensing state of ps7_init.{c,h} needed for building uboot spl. Directions for building a proper boot.bin using the new methodolgy is included in the readme.txt. Signed-off-by: Spenser Gilliland Signed-off-by: Thomas Petazzoni --- board/avnet/zedboard/readme.txt | 26 ++++++++++++++------------ configs/zedboard_defconfig | 17 +++++------------ 2 files changed, 19 insertions(+), 24 deletions(-) diff --git a/board/avnet/zedboard/readme.txt b/board/avnet/zedboard/readme.txt index 6b6df36486..efd076f91f 100644 --- a/board/avnet/zedboard/readme.txt +++ b/board/avnet/zedboard/readme.txt @@ -10,19 +10,21 @@ to the sdcard: zynq-zed.dtb -> devicetree.dtb rootfs.cpio.gz.uboot -> uramdisk.image.gz uImage -> uImage + boot.bin -> boot.bin -Uboot Support +U-Boot SPL Support ------------- -Uboot is installed in a wrapper file called BOOT.BIN located on the root of -the SD card. To create the BOOT.BIN file do the following. +Due to licensing issues, the files ps7_init.c/h are not able to be +distributed with the U-Boot source code. These files are required to make a +boot.bin file. + +If you already have the Xilinx tools installed, the follwing sequence will +unpack, patch and build the rfs, kernel, uboot, and uboot-spl. + +make zedboard_defconfig +make uboot-patch +cp ${XILINX}/ISE_DS/EDK/sw/lib/hwplatform_templates/zed_hw_platform/ps7_init.{c,h} \ +output/build/uboot-xilinx-v2014.1/boards/xilinx/zynq/ +make -source -cat < boot.bif -{ - [bootloader] - - -} -EOF -bootgen -image boot.bif -o i BOOT.BIN diff --git a/configs/zedboard_defconfig b/configs/zedboard_defconfig index 071ff65b46..e0e7760bd2 100644 --- a/configs/zedboard_defconfig +++ b/configs/zedboard_defconfig @@ -1,33 +1,26 @@ BR2_arm=y BR2_cortex_a9=y BR2_ARM_ENABLE_NEON=y - -# Lock to 3.8 headers as the kernel is based off 3.8 BR2_KERNEL_HEADERS_VERSION=y BR2_DEFAULT_KERNEL_VERSION="3.8" BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_8=y - BR2_TARGET_GENERIC_GETTY_PORT="ttyPS0" - -# Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://github.com/Xilinx/linux-xlnx.git" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="xilinx-v14.5" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="xilinx-v2014.1" BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq" BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="zynq-zed" - -# Root filesystem BR2_TARGET_ROOTFS_CPIO=y BR2_TARGET_ROOTFS_CPIO_GZIP=y BR2_TARGET_ROOTFS_CPIO_UIMAGE=y - -# Bootloader BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="zynq_zed" BR2_TARGET_UBOOT_CUSTOM_GIT=y BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://github.com/Xilinx/u-boot-xlnx.git" -BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="xilinx-v14.5" -BR2_TARGET_UBOOT_FORMAT_ELF=y +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="xilinx-v2014.1" +BR2_TARGET_UBOOT_FORMAT_IMG=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="boot.bin" -- 2.30.2