From 52fba05e26cf9860524ecf13bb292588e3171a4b Mon Sep 17 00:00:00 2001 From: Florent Kermarrec Date: Tue, 4 Aug 2015 11:18:28 +0200 Subject: [PATCH] sdram/phy/initsequence: add burst chop 4 (BC4) for DDR3 This is needed for half rate controllers with burst length of 4. For best efficiency quarter rate controllers should be used. --- misoclib/mem/sdram/phy/initsequence.py | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/misoclib/mem/sdram/phy/initsequence.py b/misoclib/mem/sdram/phy/initsequence.py index 76c25b9c..3bdf5f3a 100644 --- a/misoclib/mem/sdram/phy/initsequence.py +++ b/misoclib/mem/sdram/phy/initsequence.py @@ -142,10 +142,12 @@ const unsigned int sdram_dfii_pix_rddata_addr[{n}] = {{ ] elif sdram_phy_settings.memtype == "DDR3": bl = 2*sdram_phy_settings.nphases - if bl != 8: - raise NotImplementedError("DDR3 PHY header generator only supports BL of 8") - def format_mr0(cl, wr, dll_reset): + def format_mr0(bl, cl, wr, dll_reset): + bl_to_mr0 = { + 4: 0b10, + 8: 0b00 + } cl_to_mr0 = { 5: 0b0010, 6: 0b0100, @@ -168,7 +170,8 @@ const unsigned int sdram_dfii_pix_rddata_addr[{n}] = {{ 12: 0b110, 14: 0b111 } - mr0 = (cl_to_mr0[cl] & 1) << 2 + mr0 = bl_to_mr0[bl] + mr0 |= (cl_to_mr0[cl] & 1) << 2 mr0 |= ((cl_to_mr0[cl] >> 1) & 0b111) << 4 mr0 |= dll_reset << 8 mr0 |= wr_to_mr0[wr] << 9 @@ -187,7 +190,7 @@ const unsigned int sdram_dfii_pix_rddata_addr[{n}] = {{ mr2 |= rtt_wr << 9 return mr2 - mr0 = format_mr0(cl, 8, 1) # wr=8 FIXME: this should be ceiling(tWR/tCK) + mr0 = format_mr0(bl, cl, 8, 1) # wr=8 FIXME: this should be ceiling(tWR/tCK) mr1 = format_mr1(1, 1) # Output Drive Strength RZQ/7 (34 ohm) / Rtt RZQ/4 (60 ohm) mr2 = format_mr2(sdram_phy_settings.cwl, 2) # Rtt(WR) RZQ/4 mr3 = 0 -- 2.30.2