From 5834946d5aa016e681329fb5825b6e67b4da0b26 Mon Sep 17 00:00:00 2001 From: Bob Manson Date: Tue, 11 Mar 1997 19:45:29 +0000 Subject: [PATCH] Removed, no longer used. --- gdb/testsuite/config/sparclet-old.exp | 461 -------------------------- 1 file changed, 461 deletions(-) delete mode 100644 gdb/testsuite/config/sparclet-old.exp diff --git a/gdb/testsuite/config/sparclet-old.exp b/gdb/testsuite/config/sparclet-old.exp deleted file mode 100644 index 5a9dd91fbf4..00000000000 --- a/gdb/testsuite/config/sparclet-old.exp +++ /dev/null @@ -1,461 +0,0 @@ -# Copyright (C) 1996, 1997 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -# Please email any bugs, comments, and/or additions to this file to: -# DejaGnu@cygnus.com - -# This file was written by Michael Snyder . - -# GDB support routines for a board using the sparclet remote debugging -# protocol. - -load_lib remote.exp -load_lib gdb.exp -set gdb_prompt "\\(gdbslet\\)" - - -# -# Sparclet remote run command. -# -# This requires that we beep the user and ask him to push the board reset! -# Then we will switch to the monitor target, run the program, use 2 ^C's -# to interrupt the monitor target, and switch back to the remote target. -# Then we have to do a continue to get past the stub breakpoint. -# - -proc gdb_run_cmd {} { - global gdb_prompt - - set timeout 60 - verbose "Timeout is now $timeout seconds, starting remote stub" 2 - send_user "Please reset the board now...\n" - sleep 1 - send_user "\n" - sleep 1 - send_user "\n" - sleep 1 - send_user "\n" - - # go back to monitor, run the program, interrupt it, and start remote. - - if [target_info exists gdb_protocol] { - set protocol [target_info gdb_protocol]; - } else { - set protocol "sparclet" - } - if [target_info exists serial] { - set targetname [target_info serial]; - send_gdb "target $protocol [target_info serial]\n"; - } else { - if ![target_info exists netport] { - perror "Need either netport or gdb_serial entry for [target_info name]."; - return -1; - } - set targetname [target_info netport]; - send_gdb "target $protocol udp [target_info netport]\n"; - } - - gdb_expect { - -re "A program is being debug.*Kill it.*y or n. $" { - send_gdb "y\n" - exp_continue - } - -re "Remote target.*$gdb_prompt $" { } - -re ".*SPARCLET appears to be alive.*$gdb_prompt $" { - if $verbose>1 then { - send_user "Set target to $targetname\n" - } - } - timeout { - set timeout 10 - verbose "Timeout is now $timeout seconds" 2 - perror "Couldn't set SPARCLET target." - return -1 - } - } - - send_gdb "disable\n"; - gdb_expect { - -re ".*$gdb_prompt $" { - verbose "Breakpoints disabled" 2 - } - timeout { - perror "(timeout) disabling breakpoints"; - return -1 - } - default { - perror "error disabling breakpoints"; - } - } - send_gdb "run\n"; - gdb_expect { - -re "A program is being debug.*Kill it.*y or n. $" { - send_gdb "y\n" - exp_continue - } - -re "The program being debugged .*y or n. $" { - send_gdb "y\n" - exp_continue - } - -re ".*Starting program:.*$" { - verbose "Starting remote stub succeeded" - } - timeout { - perror "(timeout) starting the remote stub" ; - return -1 - } - default { - perror "error starting the remote stub"; - } - } - sleep 2; - send_gdb "" - sleep 1; - send_gdb "" - verbose "Sent ^C^C" - gdb_expect { - -re ".*Give up .and stop debugging it.*$" { - send_gdb "y\n" - exp_continue - } - -re ".*$gdb_prompt $" { - verbose "interrupting remote stub succeeded" - } - timeout { - perror "(timeout) interrupting the remote stub"; - return -1 - } - default { - perror "error interrupting the remote stub"; - } - } - - if [target_info exists gdb_serial] { - send_gdb "target remote [target_info gdb_serial]\n" - gdb_expect { - -re ".*Kill it?.*y or n.*" { - send_gdb "y\n"; - exp_continue - } - -re ".*$gdb_prompt $" { - verbose "connected to stub at [target_info gdb_serial]" 2 - } - timeout { - set timeout 10 - verbose "Timeout is now $timeout seconds" 2 - perror "Couldn't set remote target." - return -1 - } - } - } - - send_gdb "enable\n"; - gdb_expect { - -re ".*$gdb_prompt $" { - verbose "Breakpoints enabled" 2 - } - timeout { - perror "(timeout) enabling breakpoints"; - return -1 - } - default { - perror "error enabling breakpoints"; - } - } - send_gdb "continue\n"; - return -} - - -# -# gdb_load -- load a file into the GDB. -# Returns a 0 if there was an error, -# 1 if it load successfully. -# -proc gdb_load { arg } { - global verbose - global loadpath - global loadfile - global gdb_prompt - global GDB - global expect_out - - set loadfile [file tail $arg] - set loadpath [file dirname $arg] - - if [target_info exists gdb_protocol] { - set protocol [target_info gdb_protocol]; - } else { - set protocol "sparclet" - } - - # get the stub-based loader for faster loading - send_gdb "file [target_info gdb_loader]\n" - gdb_expect { - -re "A program is being debug.*Kill it.*y or n. $" { - send_gdb "y\n" - exp_continue - } - -re "Load new symbol table.*y or n. $" { - send_gdb "y\n" - exp_continue - } - -re "Reading symbols from.*done..*$gdb_prompt $" {} - -re "$gdb_prompt $" { perror "GDB couldn't find loader" } - timeout { - perror "(timeout) read symbol file" ; - return -1 - } - } - - if [target_info exists serial] { - set targetname [target_info serial]; - send_gdb "target $protocol [target_info serial]\n"; - } else { - if ![target_info exists netport] { - perror "Need either netport or gdb_serial entry for [target_info name]."; - return -1; - } - set targetname [target_info netport]; - send_gdb "target $protocol udp [target_info netport]\n"; - } - gdb_expect { - -re "Remote target.*$gdb_prompt $" { } - -re ".*SPARCLET appears to be alive.*$gdb_prompt $" { - if $verbose>1 then { - send_user "Set target to $targetname\n" - } - } - timeout { - set timeout 10 - verbose "Timeout is now $timeout seconds" 2 - perror "Couldn't set SPARCLET target." - return -1 - } - } - - send_gdb "run\n"; - gdb_expect { - -re "A program is being debug.*Kill it.*y or n. $" { - send_gdb "y\n" - exp_continue - } - -re "The program being debugged .*y or n. $" { - send_gdb "y\n" - exp_continue - } - -re ".*Starting program:.*loader.*$" { - verbose "Starting loader succeeded" - } - timeout { - perror "(timeout) starting the loader" ; - return -1 - } - default { - perror "error starting the loader"; - } - } - sleep 2; - send_gdb "" - sleep 1; - send_gdb "" - verbose "Sent ^C^C" - gdb_expect { - -re ".*Give up .and stop debugging it.*$" { - send_gdb "y\n" - exp_continue - } - -re ".*$gdb_prompt $" { - verbose "Running loader succeeded" - } - timeout { - perror "(timeout) interrupting the loader" ; - return -1 - } - default { - perror "error interrupting the loader"; - } - } - - # Now ready to actually load the file: - - send_gdb "file $arg\n" - gdb_expect { - -re "A program is being debug.*Kill it.*y or n. $" { - send_gdb "y\n" - exp_continue - } - -re "Load new symbol table.*y or n. $" { - send_gdb "y\n" - exp_continue - } - -re "Reading symbols from.*done..*$gdb_prompt $" {} - -re "$gdb_prompt $" { perror "GDB couldn't read file" } - timeout { - perror "(timeout) read symbol file" ; - return -1 - } - } - - if [target_info exists gdb_serial] { - send_gdb "target remote [target_info gdb_serial]\n" - gdb_expect { - -re ".*Kill it?.*y or n.*" { - send_gdb "y\n"; - exp_continue - } - -re ".*$gdb_prompt $" { - verbose "Set remote target to [target_info serial]" 2 - } - timeout { - set timeout 10 - verbose "Timeout is now $timeout seconds" 2 - perror "Couldn't set remote target." - return -1 - } - } - } - if [target_info exists gdb_load_offset] { - set offset "[target_info gdb_load_offset]"; - } else { - set offset ""; - } - send_gdb "load $arg $offset\n" - verbose "Loading $arg into $GDB" 2 - set timeout 1200 - verbose "Timeout is now $timeout seconds" 2 - gdb_expect { - -re "Loading.*$gdb_prompt $" { - verbose "Loaded $arg into $GDB" 1 - set timeout 60 - verbose "Timeout is now $timeout seconds" 2 - } - -re "$gdb_prompt $" { - if $verbose>1 then { - perror "GDB couldn't load." - } - } - timeout { - if $verbose>1 then { - perror "Timed out trying to load $arg." - } - } - } - - send_user "Please reset the board now...\n" - sleep 1 - send_user "\n" - sleep 1 - send_user "\n" - sleep 1 - send_user "\n" - - # go back to monitor, run the program, interrupt it, and start remote. - - if [target_info exists serial] { - set targetname [target_info serial]; - send_gdb "target $protocol [target_info serial]\n"; - } else { - if ![target_info exists netport] { - perror "Need either netport or gdb_serial entry for [target_info name]."; - return -1; - } - set targetname [target_info netport]; - send_gdb "target $protocol udp [target_info netport]\n"; - } - - gdb_expect { - -re "A program is being debug.*Kill it.*y or n. $" { - send_gdb "y\n" - exp_continue - } - -re "Remote target.*$gdb_prompt $" { } - -re ".*SPARCLET appears to be alive.*$gdb_prompt $" { - if $verbose>1 then { - send_user "Set target to $targetname\n" - } - } - timeout { - set timeout 10 - verbose "Timeout is now $timeout seconds" 2 - perror "Couldn't set SPARCLET target." - return -1 - } - } - - send_gdb "run\n"; - gdb_expect { - -re "A program is being debug.*Kill it.*y or n. $" { - send_gdb "y\n" - exp_continue - } - -re "The program being debugged .*y or n. $" { - send_gdb "y\n" - exp_continue - } - -re ".*Starting program:.*$" { - verbose "Starting remote stub succeeded" - } - timeout { - perror "(timeout) starting the remote stub" ; - return -1 - } - default { - perror "error starting the remote stub"; - } - } - sleep 2; - send_gdb "" - sleep 1; - send_gdb "" - verbose "Sent ^C^C" - gdb_expect { - -re ".*Give up .and stop debugging it.*$" { - send_gdb "y\n" - exp_continue - } - -re ".*$gdb_prompt $" { - verbose "interrupting remote stub succeeded" - } - timeout { - perror "(timeout) interrupting the remote stub"; - return -1 - } - default { - perror "error interrupting the remote stub"; - } - } - - if [target_info exists gdb_serial] { - send_gdb "target remote [target_info gdb_serial]\n" - gdb_expect { - -re ".*Kill it?.*y or n.*" { - send_gdb "y\n"; - exp_continue - } - -re ".*$gdb_prompt $" { - verbose "connected to stub at [target_info gdb_serial]" 2 - } - timeout { - set timeout 10 - verbose "Timeout is now $timeout seconds" 2 - perror "Couldn't set remote target." - return -1 - } - } - } - return 0 -} -- 2.30.2