From 5ab6ca68fd4501b867135f74d890dca2b30c130c Mon Sep 17 00:00:00 2001 From: Ian Lance Taylor Date: Wed, 6 Sep 1995 00:52:07 +0000 Subject: [PATCH] * configure.in: Rewrite to use autoconf. * aclocal.m4: New file. * configure: New file, built by autoconf. * acconfig.h: New file. * config.h.in: New file, built by autoheader. * Makefile.in: Various changes for new configure script. Also: (PROGS): Remove $(SYSINFO_PROG). (ALL_CFLAGS): Remove $(TDEFINES). (version.o): Use $(ALL_CFLAGS). (cplus-dem.o, dlltool.o, nlmconv.o): Likewise. (sysdump.o): Depend upon bucomm.h and config.h. (srconv.o, arsup.o, strings.o): Depend upon config.h. (filemode.o): Don't depend upon ../bfd/sysdep.h. (bucomm.o): Depend upon config.h, not ../bfd/sysdep.h. (size.o, objdump.o, nm.o, ar.o, objcopy.o): Likewise. (nlmheader.o, nlmconv.o): Likewise. (distclean): Don't remove sysdep.h. * bucomm.h: Include "ansidecl.h", , and "config.h". Include "fopen-same.h" or "fopen-bin.h", based on USE_BINARY_FOPEN. Include , and declare errno if it is not a macro. Include , , , , and if they are present. Declare strchr, strrchr, and strstr if no string header file exists. Include if it exists and does not. Define O_RDONLY and O_RDWR if necessary. * ar.c: Don't include "sysdep.h". Do include and . Use HAVE_GOOD_UTIME_H rather than POSIX_UTIME. Use HAVE_UTIMES rather than !USE_UTIME. Don't include , and don't declare errno. * arsup.c: Don't include . * bucomm.c: Don't include "sysdep.h". Include , , and . Include if it defines time_t. Define time_t if necessary. * coffdump.c: Don't include "sysdep.h". * coffgrok.c, filemode.c, nlmconv.c, size.c: Likewise. * srconv.c, strings.c: Likewise. * nm.c: Don't include "sysdep.h". Don't try to define HAVE_SBRK. * objcopy.c: Don't include "sysdep.h". Include and . (simple_copy): Use creat rather than assuming that O_CREAT is defined. * objdump.c: Don't include "sysdep.h". Use NEED_DECLARATION_PRINTF rather than !FPRINTF_ALREADY_DECLARED. * sysdump.c: Include "bfd.h" and "bucomm.h". Don't include "sysdep.h" or . (dump_symbol_info): Rename from symbol_info. Change all callers. --- binutils/.Sanitize | 4 + binutils/ChangeLog | 49 ++ binutils/Makefile.in | 108 +-- binutils/acconfig.h | 14 + binutils/config.h.in | 40 + binutils/configure | 1919 +++++++++++++++++++++++++++-------------- binutils/configure.in | 204 +++-- 7 files changed, 1588 insertions(+), 750 deletions(-) create mode 100644 binutils/acconfig.h create mode 100644 binutils/config.h.in diff --git a/binutils/.Sanitize b/binutils/.Sanitize index 197cced3beb..408ffaf10c1 100644 --- a/binutils/.Sanitize +++ b/binutils/.Sanitize @@ -28,6 +28,8 @@ Makefile.in NEWS README TODO +acconfig.h +aclocal.m4 alloca.c ar.1 ar.c @@ -42,6 +44,8 @@ coffdump.c coffgrok.c coffgrok.h config +config.h.in +configure configure.bat configure.in cxxfilt.man diff --git a/binutils/ChangeLog b/binutils/ChangeLog index ebb9ff65d64..e15b1deace6 100644 --- a/binutils/ChangeLog +++ b/binutils/ChangeLog @@ -1,3 +1,52 @@ +Tue Sep 5 20:22:42 1995 Ian Lance Taylor + + * configure.in: Rewrite to use autoconf. + * aclocal.m4: New file. + * configure: New file, built by autoconf. + * acconfig.h: New file. + * config.h.in: New file, built by autoheader. + * Makefile.in: Various changes for new configure script. Also: + (PROGS): Remove $(SYSINFO_PROG). + (ALL_CFLAGS): Remove $(TDEFINES). + (version.o): Use $(ALL_CFLAGS). + (cplus-dem.o, dlltool.o, nlmconv.o): Likewise. + (sysdump.o): Depend upon bucomm.h and config.h. + (srconv.o, arsup.o, strings.o): Depend upon config.h. + (filemode.o): Don't depend upon ../bfd/sysdep.h. + (bucomm.o): Depend upon config.h, not ../bfd/sysdep.h. + (size.o, objdump.o, nm.o, ar.o, objcopy.o): Likewise. + (nlmheader.o, nlmconv.o): Likewise. + (distclean): Don't remove sysdep.h. + * bucomm.h: Include "ansidecl.h", , and "config.h". + Include "fopen-same.h" or "fopen-bin.h", based on + USE_BINARY_FOPEN. Include , and declare errno if it is + not a macro. Include , , , + , and if they are present. Declare strchr, + strrchr, and strstr if no string header file exists. Include + if it exists and does not. Define + O_RDONLY and O_RDWR if necessary. + * ar.c: Don't include "sysdep.h". Do include and + . Use HAVE_GOOD_UTIME_H rather than POSIX_UTIME. Use + HAVE_UTIMES rather than !USE_UTIME. Don't include , and + don't declare errno. + * arsup.c: Don't include . + * bucomm.c: Don't include "sysdep.h". Include , + , and . Include if it defines + time_t. Define time_t if necessary. + * coffdump.c: Don't include "sysdep.h". + * coffgrok.c, filemode.c, nlmconv.c, size.c: Likewise. + * srconv.c, strings.c: Likewise. + * nm.c: Don't include "sysdep.h". Don't try to define HAVE_SBRK. + * objcopy.c: Don't include "sysdep.h". Include and + . + (simple_copy): Use creat rather than assuming that O_CREAT is + defined. + * objdump.c: Don't include "sysdep.h". Use + NEED_DECLARATION_PRINTF rather than !FPRINTF_ALREADY_DECLARED. + * sysdump.c: Include "bfd.h" and "bucomm.h". Don't include + "sysdep.h" or . + (dump_symbol_info): Rename from symbol_info. Change all callers. + Mon Sep 4 14:30:00 1995 Ian Lance Taylor * configure.in (host_makefile_frag): Don't set. Substitute for diff --git a/binutils/Makefile.in b/binutils/Makefile.in index 961d7833c46..7e189e76396 100644 --- a/binutils/Makefile.in +++ b/binutils/Makefile.in @@ -17,12 +17,14 @@ # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -srcdir = . +VPATH = @srcdir@ +srcdir = @srcdir@ -prefix = /usr/local +target_alias = @target_alias@ +prefix = @prefix@ -program_transform_name = -exec_prefix = $(prefix) +program_transform_name = @program_transform_name@ +exec_prefix = @exec_prefix@ bindir = $(exec_prefix)/bin libdir = $(exec_prefix)/lib tooldir = $(exec_prefix)/$(target_alias) @@ -111,7 +113,7 @@ SRCONV_PROG=srconv sysdump coffdump MANPAGES= ar nm objdump ranlib size strings strip objcopy nlmconv -PROGS = $(SIZE_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRINGS_PROG) $(STRIP_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) $(BUILD_NLMCONV) $(BUILD_SRCONV) $(SYSINFO_PROG) $(BUILD_DLLTOOL) +PROGS = $(SIZE_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRINGS_PROG) $(STRIP_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ STAGESTUFF = $(PROGS) *.o # Files that can be generated, but should be in the distribution. # Don't build $(DEMANGLER_PROG).1, since its name may vary with the @@ -126,10 +128,9 @@ BFDDIR = $(BASEDIR)/bfd INCDIR = $(BASEDIR)/include INCLUDES = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) -#### host and target dependant Makefile fragments come in here. -### +@target_makefile_fragment@ -ALL_CFLAGS = $(INCLUDES) @HDEFINES@ $(TDEFINES) $(CFLAGS) +ALL_CFLAGS = $(INCLUDES) @HDEFINES@ $(CFLAGS) .c.o: $(CC) -c $(ALL_CFLAGS) $< @@ -192,16 +193,16 @@ site.exp: ./config.status Makefile @echo "# Do not edit here. If you wish to override these" >> ./tmp0 @echo "# values, add them to the last section" >> ./tmp0 @echo "# HOST AND TARGET INFO" >> ./tmp0 - @echo "set host_os $(host_os)" >> ./tmp0 - @echo "set host_alias $(host_alias)" >> ./tmp0 - @echo "set host_cpu $(host_cpu)" >> ./tmp0 - @echo "set host_vendor $(host_vendor)" >> ./tmp0 - @echo "set target_os $(target_os)" >> ./tmp0 - @echo "set target_alias $(target_alias)" >> ./tmp0 - @echo "set target_cpu $(target_cpu)" >> ./tmp0 - @echo "set target_vendor $(target_vendor)" >> ./tmp0 - @echo "set host_triplet $(host_canonical)" >> ./tmp0 - @echo "set target_triplet $(target_canonical)" >> ./tmp0 + @echo "set host_os @host_os@" >> ./tmp0 + @echo "set host_alias @host_alias@" >> ./tmp0 + @echo "set host_cpu @host_cpu@" >> ./tmp0 + @echo "set host_vendor @host_vendor@" >> ./tmp0 + @echo "set target_os @target_os@" >> ./tmp0 + @echo "set target_alias @target_alias@" >> ./tmp0 + @echo "set target_cpu @target_cpu@" >> ./tmp0 + @echo "set target_vendor @target_vendor@" >> ./tmp0 + @echo "set host_triplet @host@" >> ./tmp0 + @echo "set target_triplet @target@" >> ./tmp0 @echo "# DIRECTORY INFO" >> ./tmp0 @echo "set objdir `pwd`" >> ./tmp0 @echo "" >> ./tmp0 @@ -249,14 +250,14 @@ $(OBJDUMP_PROG): $(ADDL_LIBS) objdump.o $(BFD) $(OPCODES) underscore.c: Makefile rm -f underscore.c echo '/*WARNING: This file is automatically generated!*/' >underscore.t - echo "int prepends_underscore = $(UNDERSCORE);" >>underscore.t + echo "int prepends_underscore = @UNDERSCORE@;" >>underscore.t mv -f underscore.t underscore.c version.o: version.c Makefile - $(CC) $(INCLUDES) $(HDEFINES) $(TDEFINES) -DVERSION='"$(VERSION)"' $(CFLAGS) -c $(srcdir)/version.c + $(CC) -DVERSION='"$(VERSION)"' $(ALL_CFLAGS) -c $(srcdir)/version.c cplus-dem.o: $(BASEDIR)/libiberty/cplus-dem.c $(INCDIR)/getopt.h - $(CC) -c -DMAIN -DVERSION='"$(VERSION)"' $(INCLUDES) $(HDEFINES) $(TDEFINES) $(CFLAGS) $(BASEDIR)/libiberty/cplus-dem.c + $(CC) -c -DMAIN -DVERSION='"$(VERSION)"' $(ALL_CFLAGS) $(BASEDIR)/libiberty/cplus-dem.c $(DEMANGLER_PROG): cplus-dem.o $(LIBIBERTY) underscore.o $(CC) $(CFLAGS) $(LDFLAGS) -o $(DEMANGLER_PROG) cplus-dem.o $(LIBIBERTY) $(EXTRALIBS) underscore.o @@ -341,7 +342,7 @@ sysinfo.o: sysinfo.c fi srconv.o: srconv.c sysroff.h sysroff.c coffgrok.h $(INCDIR)/coff/internal.h \ - ../bfd/libcoff.h + ../bfd/libcoff.h config.h srconv: srconv.o coffgrok.o $(ADDL_LIBS) $(CC) $(CFLAGS) $(LDFLAGS) -o $@ srconv.o coffgrok.o $(ADDL_LIBS) $(EXTRALIBS) @@ -361,12 +362,12 @@ deflex.c:deflex.l mv lex.yy.c deflex.c dlltool.o:dlltool.c - $(CC) -c $(INCLUDES) $(HDEFINES) $(TDEFINES) $(DLLTOOL_DEFS) $(CFLAGS) $(srcdir)/dlltool.c + $(CC) -c @DLLTOOL_DEFS@ $(ALL_CFLAGS) $(srcdir)/dlltool.c coffdump: coffdump.o coffgrok.o $(ADDL_LIBS) $(CC) $(CFLAGS) $(LDFLAGS) -o $@ coffdump.o coffgrok.o $(ADDL_LIBS) $(EXTRALIBS) -sysdump.o: sysdump.c sysroff.h sysroff.c +sysdump.o: sysdump.c sysroff.h sysroff.c bucomm.h config.h sysdump: sysdump.o $(ADDL_LIBS) $(CC) $(CFLAGS) $(LDFLAGS) -o $@ sysdump.o $(ADDL_LIBS) $(EXTRALIBS) @@ -379,8 +380,8 @@ nlmheader.c: nlmheader.y sysinfo.c mv -f y.tab.c nlmheader.c nlmconv.o: nlmconv.c - ldname=`t='$(program_transform_name)'; echo ld | sed -e "s/brokensed/brokensed/" $$t`; \ - $(CC) -c -DLD_NAME="\"$${ldname}\"" $(INCLUDES) $(HDEFINES) $(TDEFINES) $(NLMCONV_DEFS) $(CFLAGS) $(srcdir)/nlmconv.c + ldname=`echo ld | sed '$(program_transform_name)'`; \ + $(CC) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(ALL_CFLAGS) $(srcdir)/nlmconv.c $(NLMCONV_PROG): nlmconv.o nlmheader.o $(ADDL_LIBS) $(BFD) $(CC) $(CFLAGS) $(LDFLAGS) -o $@ nlmconv.o nlmheader.o $(ADDL_LIBS) $(EXTRALIBS) @@ -392,47 +393,47 @@ $(NLMCONV_PROG): nlmconv.o nlmheader.o $(ADDL_LIBS) $(BFD) # changing "../include" to "$(INCDIR)" bucomm.o: bucomm.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ - $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \ - $(INCDIR)/fopen-same.h bucomm.h + $(INCDIR)/obstack.h $(BFDDIR)/hosts/std-host.h \ + $(INCDIR)/fopen-same.h bucomm.h config.h filemode.o: filemode.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ - $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \ + $(INCDIR)/obstack.h $(BFDDIR)/hosts/std-host.h \ $(INCDIR)/fopen-same.h size.o: size.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ - $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \ - $(INCDIR)/fopen-same.h $(INCDIR)/getopt.h + $(INCDIR)/obstack.h $(BFDDIR)/hosts/std-host.h \ + $(INCDIR)/fopen-same.h $(INCDIR)/getopt.h config.h objdump.o: objdump.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ - $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \ + $(INCDIR)/obstack.h $(BFDDIR)/hosts/std-host.h \ $(INCDIR)/fopen-same.h $(INCDIR)/getopt.h \ $(INCDIR)/dis-asm.h $(INCDIR)/aout/aout64.h \ - $(INCDIR)/elf/internal.h $(INCDIR)/aout/stab.def + $(INCDIR)/elf/internal.h $(INCDIR)/aout/stab.def config.h nm.o: nm.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ - $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \ - $(INCDIR)/fopen-same.h bucomm.h $(INCDIR)/getopt.h \ + $(INCDIR)/obstack.h $(BFDDIR)/hosts/std-host.h \ + $(INCDIR)/fopen-same.h bucomm.h config.h $(INCDIR)/getopt.h \ $(INCDIR)/aout/stab_gnu.h $(INCDIR)/aout/stab.def \ $(INCDIR)/aout/ranlib.h $(INCDIR)/demangle.h ar.o: ar.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ - $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \ - $(INCDIR)/fopen-same.h bucomm.h $(INCDIR)/aout/ar.h \ - $(BFDDIR)/libbfd.h arsup.h + $(INCDIR)/obstack.h $(BFDDIR)/hosts/std-host.h \ + $(INCDIR)/fopen-same.h bucomm.h config.h $(INCDIR)/aout/ar.h \ + $(BFDDIR)/libbfd.h arsup.h arparse.o: arparse.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ $(INCDIR)/obstack.h arsup.h arlex.o: arlex.c ./arparse.h not-ranlib.o: not-ranlib.c arsup.o: arsup.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ - $(INCDIR)/obstack.h arsup.h bucomm.h + $(INCDIR)/obstack.h arsup.h bucomm.h config.h strings.o: strings.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ - $(INCDIR)/obstack.h bucomm.h + $(INCDIR)/obstack.h bucomm.h config.h objcopy.o: objcopy.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ - $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \ - $(INCDIR)/fopen-same.h bucomm.h + $(INCDIR)/obstack.h $(BFDDIR)/hosts/std-host.h \ + $(INCDIR)/fopen-same.h bucomm.h config.h is-strip.o: is-strip.c is-ranlib.o: is-ranlib.c not-strip.o: not-strip.c -nlmheader.o: nlmheader.c ../bfd/bfd.h ../bfd/sysdep.h \ - $(BFDDIR)/hosts/std-host.h $(INCDIR)/fopen-same.h bucomm.h \ +nlmheader.o: nlmheader.c ../bfd/bfd.h \ + $(BFDDIR)/hosts/std-host.h $(INCDIR)/fopen-same.h bucomm.h config.h \ $(INCDIR)/nlm/common.h $(INCDIR)/nlm/internal.h nlmconv.h -nlmconv.o: nlmconv.c ../bfd/bfd.h $(INCDIR)/libiberty.h ../bfd/sysdep.h \ - $(BFDDIR)/hosts/std-host.h $(INCDIR)/fopen-same.h bucomm.h \ +nlmconv.o: nlmconv.c ../bfd/bfd.h $(INCDIR)/libiberty.h \ + $(BFDDIR)/hosts/std-host.h $(INCDIR)/fopen-same.h bucomm.h config.h \ $(BFDDIR)/libnlm.h $(INCDIR)/nlm/common.h \ $(INCDIR)/nlm/internal.h $(INCDIR)/nlm/external.h nlmconv.h \ $(INCDIR)/coff/sym.h $(INCDIR)/coff/ecoff.h @@ -551,7 +552,7 @@ mostlyclean: clean: mostlyclean -rm -f $(PROGS) underscore.c sysroff sysroff.c sysroff.h sysinfo distclean: - -rm -f Makefile config.status sysdep.h *.o *~ \#* core y.* \ + -rm -f Makefile config.status *.o *~ \#* core y.* \ binutils.?? binutils.??s binutils.aux binutils.log binutils.toc -rm -f $(PROGS) underscore.c realclean: clean distclean @@ -575,7 +576,7 @@ install: all $(DEMANGLER_PROG).1 for i in $(TOOL_PROGS) ; do \ j=`echo $$i | sed -e 's/.new//'`; \ rm -f $(tooldir)/bin/$$j; \ - k=`t='$(program_transform_name)'; echo $$j | sed -e s/x/x/ $$t`; \ + k=`echo $$j | sed '$(program_transform_name)'`; \ ln $(bindir)/$$k $(tooldir)/bin/$$j >/dev/null 2>/dev/null \ || $(INSTALL_PROGRAM) $$i $(tooldir)/bin/$$j; \ done; \ @@ -657,8 +658,15 @@ make: echo >>Makefile ; \ sed "s/^#__$(HOST)__#//" < Makefile.old >>Makefile -Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) - $(SHELL) ./config.status +Makefile: Makefile.in config.status + CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status + +config.h: stamp-h ; @true +stamp-h: config.h.in config.status + CONFIG_FILES= CONFIG_HEADERS=config.h $(SHELL) ./config.status + +config.status: configure + $(SHELL) ./config.status --recheck ### Local Variables: *** ### mode:fundamental *** diff --git a/binutils/acconfig.h b/binutils/acconfig.h new file mode 100644 index 00000000000..1ae1eae752b --- /dev/null +++ b/binutils/acconfig.h @@ -0,0 +1,14 @@ +/* Is the type time_t defined in ? */ +#undef HAVE_TIME_T_IN_TIME_H + +/* Is the type time_t defined in ? */ +#undef HAVE_TIME_T_IN_TYPES_H + +/* Does define struct utimbuf? */ +#undef HAVE_GOOD_UTIME_H + +/* Whether fprintf must be declared even if is included. */ +#undef NEED_DECLARATION_FPRINTF + +/* Do we need to use the b modifier when opening binary files? */ +#undef USE_BINARY_FOPEN diff --git a/binutils/config.h.in b/binutils/config.h.in new file mode 100644 index 00000000000..7e4d7e98257 --- /dev/null +++ b/binutils/config.h.in @@ -0,0 +1,40 @@ +/* config.h.in. Generated automatically from configure.in by autoheader. */ + +/* Is the type time_t defined in ? */ +#undef HAVE_TIME_T_IN_TIME_H + +/* Is the type time_t defined in ? */ +#undef HAVE_TIME_T_IN_TYPES_H + +/* Does define struct utimbuf? */ +#undef HAVE_GOOD_UTIME_H + +/* Whether fprintf must be declared even if is included. */ +#undef NEED_DECLARATION_FPRINTF + +/* Do we need to use the b modifier when opening binary files? */ +#undef USE_BINARY_FOPEN + +/* Define if you have the sbrk function. */ +#undef HAVE_SBRK + +/* Define if you have the utimes function. */ +#undef HAVE_UTIMES + +/* Define if you have the header file. */ +#undef HAVE_FCNTL_H + +/* Define if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define if you have the header file. */ +#undef HAVE_STRING_H + +/* Define if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define if you have the header file. */ +#undef HAVE_SYS_FILE_H + +/* Define if you have the header file. */ +#undef HAVE_UNISTD_H diff --git a/binutils/configure b/binutils/configure index 55d5b9c5ad2..e349442736d 100755 --- a/binutils/configure +++ b/binutils/configure @@ -1,676 +1,1333 @@ -#!/bin/sh +#! /bin/sh -# Configuration script -# Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc. +# Guess values for system-dependent variables and create Makefiles. +# Generated automatically using autoconf version 2.4 +# Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc. +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. + +# Defaults: +ac_help= +ac_default_prefix=/usr/local +# Any additions from configure.in: +ac_help="$ac_help + --enable-targets alternative target configurations" + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +cache_file=./config.cache +exec_prefix=NONE +host=NONE +no_create= +nonopt=NONE +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +target=NONE +verbose= +x_includes=NONE +x_libraries=NONE -#This file is part of GNU. +# Initialize some other variables. +subdirs= -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +ac_prev= +for ac_option +do -# $Id$ + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case "$ac_option" in + + -build | --build | --buil | --bui | --bu | --b) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=* | --b=*) + build="$ac_optarg" ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he) + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat << EOF +Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +Configuration: + --cache-file=FILE cache test results in FILE + --help print this message + --no-create do not create output files + --quiet, --silent do not print \`checking...' messages + --version print the version of autoconf that created configure +Directory and file names: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=PREFIX install architecture-dependent files in PREFIX + [same as prefix] + --srcdir=DIR find the sources in DIR [configure dir or ..] + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names +Host type: + --build=BUILD configure for building on BUILD [BUILD=HOST] + --host=HOST configure for HOST [guessed] + --target=TARGET configure for TARGET [TARGET=HOST] +Features and packages: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +--enable and --with options recognized:$ac_help +EOF + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site="$ac_optarg" ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 2.4" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" 1>&2 + fi + if test "x$nonopt" != xNONE; then + { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } + fi + nonopt="$ac_option" + ;; + + esac +done -# -# Shell script to create proper links to machine-dependent files in -# preparation for compilation. -# -# If configure succeeds, it leaves its status in config.status. -# If configure fails after disturbing the status quo, -# config.status is removed. -# +if test -n "$ac_prev"; then + { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +fi -remove=rm -hard_link=ln -symbolic_link='ln -s' - -#for Test -#remove="echo rm" -#hard_link="echo ln" -#symbolic_link="echo ln -s" - -progname=$0 - -# clear some things potentially inherited from environment. -ansi= -arguments=$* -defaulttargets= -destdir= -fatal= -hostsubdir= -Makefile=Makefile -Makefile_in=Makefile.in -norecursion= -recurring= -removing= -srcdir= -srctrigger= -target= -targets= -commontargets= -configdirs= -targetsubdir= -template= -verbose= +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 6 checking for... messages and results +# 5 compiler messages saved in config.log +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>./config.log -for arg in $*; +echo "\ +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +" 1>&5 + +# Strip out --no-create and --no-recursion so they do not pile up. +# Also quote any args containing shell metacharacters. +ac_configure_args= +for ac_arg do - case ${arg} in - -ansi | +a*) - ansi=true - clib=clib - ;; - -destdir=* | +destdir=* | +destdi=* | +destd=* | +dest=* | +des=* | +de=* | +d=*) - destdir=`echo ${arg} | sed 's/[+-]d[a-z]*=//'` - ;; - -languages=* | +languages=* | +language=* | +languag=* \ - | +langua=* | +langu=* | +lang=* | +lan=* | +la=* \ - | +l=*) - languages="${languages} `echo ${arg} | sed 's/[+-]l[a-z]*=//'`" - ;; - -gas | +g*) - gas=yes - ;; - -help | +h*) - fatal=true - ;; - -nfp | +nf*) - nfp=yes - ;; - -norecursion | +no*) - norecursion=true - ;; - -recurring | +recurring | +recurrin | +recurri | +recurr | +recur | +recu | +rec | +re) - recurring=true - ;; - -rm | +rm) - removing=${arg} - ;; -# -srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*) -# srcdir=`echo ${arg} | sed 's/[+-]s[a-z]*=//'` -# ;; - -subdirs | +f* | +su*) - subdirs=${arg} - ;; - -target=* | +target=* | +targe=* | +targ=* | +tar=* | +ta=*) - if [ -n "${targets}" ] ; then - subdirs="+subdirs" - fi - - newtargets="${targets} `echo ${arg} | sed 's/[+-]t[a-z]*=//'`" - targets="${newtargets}" - ;; - -template=* | +template=* | +templat=* | +templa=* | +templ=* | +temp=* | +tem=* | +te=*) - template=`echo ${arg} | sed 's/[+-]template=//'` - ;; - -v | -verbose | +v*) - verbose=${arg} - ;; - -* | +*) - (echo ; - echo "Unrecognized option: \"${arg}\"". ; - echo) 1>&2 - fatal=true - ;; - *) - if [ -n "${hosts}" ] ; then - subdirs="+subdirs" - fi - - newhosts="${hosts} ${arg}" - hosts=${newhosts} - ;; - esac + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args $ac_arg" ;; + esac done -if [ -n "${verbose}" ] ; then - echo `pwd`/configure $* +# NLS nuisances. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LANG+set}" = set; then LANG=C; export LANG; fi + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo > confdefs.h + +# A filename unique to this package, relative to the directory that +# configure is in, which we can look for to find out if srcdir is correct. +ac_unique_file=ar.c + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + else + { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + fi +fi +srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + echo "loading site script $ac_site_file" + . "$ac_site_file" + fi +done -# process host and target only if not rebuilding configure itself or removing. -if [ -z "${template}" -a -z "${removing}" -a -z "${fatal}" ] ; then - # Complain if an arg is missing - if [ -z "${hosts}" ] ; then - (echo ; - echo "configure: No HOST specified." ; - echo) 1>&2 - fatal=true - fi +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5 2>&5' +ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5 2>&5' + +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= fi -if [ -n "${fatal}" -o "${hosts}" = "help" ] ; then - (echo "Usage: configure HOST" ; - echo ; - echo "Options: [defaults in brackets]" ; - echo " +ansi configure w/ANSI library. [no ansi lib]" ; - echo " +destdir=MYDIR configure for installation into MYDIR. [/usr/local]" ; - echo " +subdirs configure in subdirectories. [in source directories]" ; - echo " +lang=LANG configure to build LANG. [gcc]" ; - echo " +help print this message. [normal config]" ; - echo " +gas configure the compilers for use with gas. [native as]" ; - echo " +nfp configure the compilers default to soft floating point. [hard float]" ; - echo " +norecursion configure this directory only. [recurse]" ; - echo " +rm remove this configuration. [build a configuration]" ; - echo " +target=TARGET configure for TARGET. [TARGET = HOST]" ; - echo " +template=TEM rebuild configure using TEM. [normal config]" ; - echo ; - echo "Where HOST and TARGET are something like \"vax\", \"sun3\", \"encore\", etc." ; - echo "Asking for more than one \"+target\" implies \"+subdirs\". Any other" ; - echo "options given will apply to all targets.") 1>&2 - - if [ -r config.status ] ; then - cat config.status - fi - exit 1 + +# Check whether --enable-targets or --disable-targets was given. +enableval="$enable_targets" +if test -n "$enableval"; then + case "${enableval}" in + yes | "") { echo "configure: error: enable-targets option must specify target names or 'all'" 1>&2; exit 1; } + ;; + no) enable_targets= ;; + *) enable_targets=$enableval ;; +esac fi -#### configure.in common parts come in here. -# This file is a shell script that supplies the information necessary -# to tailor a template configure script into the configure script -# appropriate for this directory. For more information, check any -# existing configure script. -srctrigger=ar.c -srcname="binutils" -## end of common part. +ac_aux_dir= +for ac_dir in `cd $srcdir/..; pwd` $srcdir/`cd $srcdir/..; pwd`; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir/..; pwd` $srcdir/`cd $srcdir/..; pwd`" 1>&2; exit 1; } +fi +ac_config_guess=$ac_aux_dir/config.guess +ac_config_sub=$ac_aux_dir/config.sub +ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. -# are we rebuilding config itself? -if [ -n "${template}" ] ; then - if [ ! -r ${template} ] ; then - echo '***' "Can't find template ${template}." 1>&2 - exit 1 - fi -# prep the template - sed -e '/^#### configure.in common parts come in here.$/,/^## end of common part.$/c\ -#### configure.in common parts come in here.\ -## end of common part.' \ - -e '/^#### configure.in per-host parts come in here.$/,/^## end of per-host part.$/c\ -#### configure.in per-host parts come in here.\ -## end of per-host part.' \ - -e '/^#### configure.in per-target parts come in here.$/,/^## end of per-target part.$/c\ -#### configure.in per-target parts come in here.\ -## end of per-target part.' \ - -e '/^#### configure.in post-target parts come in here.$/,/^## end of post-target part.$/c\ -#### configure.in post-target parts come in here.\ -## end of post-target part.' \ - < ${template} > template.new - - if [ -r configure.in ] ; then - if [ -z "`grep '^# per\-host:' configure.in`" ] ; then - echo '***' `pwd`/configure.in has no "per-host:" line. 1>&2 - exit 1 - fi - - if [ -z "`grep '^# per\-target:' configure.in`" ] ; then - echo '***' `pwd`/configure.in has no "per-target:" line. 1>&2 - exit 1 - fi - - # split configure.in into common, per-host, per-target, - # and post-target parts. Post-target is optional. - sed -e '/^# per\-host:/,$d' configure.in > configure.com - sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' configure.in > configure.hst - if grep -s '^# post-target:' configure.in ; then - sed -e '1,/^# per\-target:/d' -e '/^# post\-target:/,$d' configure.in > configure.tgt - sed -e '1,/^# post\-target:/d' configure.in > configure.pos - else - sed -e '1,/^# per\-target:/d' configure.in > configure.tgt - echo >configure.pos - fi - - # and insert them - sed -e '/^#### configure.in common parts come in here.$/ r configure.com' \ - -e '/^#### configure.in per\-host parts come in here.$/ r configure.hst' \ - -e '/^#### configure.in per\-target parts come in here.$/ r configure.tgt' \ - -e '/^#### configure.in post\-target parts come in here.$/ r configure.pos' \ - template.new > configure.new - - rm -f configure.com configure.tgt configure.hst configure.pos - else - echo Warning: no configure.in in `pwd` - cat ${template} >> configure - fi +# Do some error checking and defaulting for the host and target type. +# The inputs are: +# configure --host=HOST --target=TARGET --build=BUILD NONOPT +# +# The rules are: +# 1. You are not allowed to specify --host, --target, and nonopt at the +# same time. +# 2. Host defaults to nonopt. +# 3. If nonopt is not specified, then host defaults to the current host, +# as determined by config.guess. +# 4. Target and build default to nonopt. +# 5. If nonopt is not specified, then target and build default to host. + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +case $host---$target---$nonopt in +NONE---*---* | *---NONE---* | *---*---NONE) ;; +*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; +esac + + +# Make sure we can run config.sub. +if $ac_config_sub sun4 >/dev/null 2>&1; then : +else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } +fi - chmod a+x configure.new - rm template.new -# mv configure configure.old - mv configure.new configure +echo $ac_n "checking host system type""... $ac_c" 1>&6 + +host_alias=$host +case "$host_alias" in +NONE) + case $nonopt in + NONE) + if host_alias=`$ac_config_guess`; then : + else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } + fi ;; + *) host_alias=$nonopt ;; + esac ;; +esac + +host=`$ac_config_sub $host_alias` +host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` +echo "$ac_t""$host" 1>&6 + +echo $ac_n "checking target system type""... $ac_c" 1>&6 + +target_alias=$target +case "$target_alias" in +NONE) + case $nonopt in + NONE) target_alias=$host_alias ;; + *) target_alias=$nonopt ;; + esac ;; +esac + +target=`$ac_config_sub $target_alias` +target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` +echo "$ac_t""$target" 1>&6 + +echo $ac_n "checking build system type""... $ac_c" 1>&6 + +build_alias=$build +case "$build_alias" in +NONE) + case $nonopt in + NONE) build_alias=$host_alias ;; + *) build_alias=$nonopt ;; + esac ;; +esac + +build=`$ac_config_sub $build_alias` +build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` +echo "$ac_t""$build" 1>&6 + +test "$host_alias" != "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- + +if test -z "$target" ; then + { echo "configure: error: Unrecognized target system type; please check config.sub." 1>&2; exit 1; } +fi +if test -z "$host" ; then + { echo "configure: error: Unrecognized host system type; please check config.sub." 1>&2; exit 1; } +fi +if test "$program_transform_name" = s,x,x,; then + program_transform_name= +else + # Double any \ or $. + echo 's,\\,\\\\,g; s,\$,$$,g' > conftestsed + program_transform_name="`echo $program_transform_name|sed -f conftestsed`" + rm -f conftestsed +fi +test "$program_prefix" != NONE && + program_transform_name="s,^,${program_prefix},; $program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" + +# sed with no file args requires a program. +test "$program_transform_name" = "" && program_transform_name="s,x,x," + + +# host-specific stuff: + +HDEFINES= +LDFLAGS= + +. ${srcdir}/../bfd/configure.host + +echo $ac_n "checking for CC""... $ac_c" 1>&6 +test -z "$CC" && test -r ../Makefile && CC=`egrep '^CC *=' ../Makefile | tail -1 | sed 's/^CC *= *//'` +test -z "$CC" && CC=cc +echo "$ac_t""setting CC to $CC" 1>&6 + +cat > conftest.c <&5 | egrep yes >/dev/null 2>&1; then + GCC=yes + if test "${CFLAGS+set}" != set; then + echo 'void f(){}' > conftest.c + if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + CFLAGS="-g -O" + else + CFLAGS="-O" + fi + fi +else + GCC= + test "${CFLAGS+set}" = set || CFLAGS="-g" +fi +rm -f conftest* - if [ -n "${verbose}" ] ; then - echo Rebuilt configure in `pwd` - fi - # Now update config.sub from the template directory. - if echo "$template" | grep -s 'configure$' ; then - cp `echo "$template" | sed s/configure$/config.sub/` ./config.sub.new - # mv config.sub config.sub.old - mv config.sub.new config.sub - if [ -n "${verbose}" ] ; then - echo Rebuilt config.sub in `pwd` - fi - fi - if [ -z "${norecursion}" ] ; then - # If template is relative path, make it absolute for recurring. - if echo "${template}" | grep -s '^/' ; then - true - else - template=`pwd`/${template} - fi - - while [ -n "${configdirs}" ] ; do - # set configdir to car of configdirs, configdirs to cdr of configdirs - set ${configdirs}; configdir=$1; shift; configdirs=$* - - if [ "`echo ${configdir}.*`" != "${configdir}.*" ] ; then - targetspecificdirs=${configdir}.* - else - targetspecificdirs= - fi - - for i in ${configdir} ${targetspecificdirs} ; do - if [ -d $i ] ; then - if [ -r $i/configure ] ; then - (cd $i ; - ./configure +template=${template} ${verbose}) - else - echo Warning: No configure script in `pwd`/$i - fi - else - if [ -n "${verbose}" ] ; then - echo Warning: directory $i is missing. - fi - fi - done - done +AR=${AR-ar} + +# Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="ranlib" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + for ac_prog in ginstall installbsd scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + # OSF/1 installbsd also uses dspmsg, but is usable. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi fi + done + ;; + esac + done + IFS="$ac_save_ifs" + # As a last resort, use the slow shell script. + test -z "$ac_cv_path_install" && ac_cv_path_install="$ac_install_sh" +fi + INSTALL="$ac_cv_path_install" +fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - exit 0 + +echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then +if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # This must be in double quotes, not single quotes, because CPP may get + # substituted into the Makefile and "${CC-cc}" will confuse make. + CPP="${CC-cc} -E" + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. + cat > conftest.$ac_ext < +Syntax Error +EOF +eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + rm -rf conftest* + CPP="${CC-cc} -E -traditional-cpp" + cat > conftest.$ac_ext < +Syntax Error +EOF +eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + rm -rf conftest* + CPP=/lib/cpp +fi +rm -f conftest* +fi +rm -f conftest* + ac_cv_prog_CPP="$CPP" +fi + CPP="$ac_cv_prog_CPP" +else + ac_cv_prog_CPP="$CPP" fi +echo "$ac_t""$CPP" 1>&6 -# some sanity checks on configure.in -if [ -z "${srctrigger}" ] ; then - echo Warning: srctrigger not set in configure.in. `pwd` not configured. - exit 1 +for ac_hdr in string.h strings.h stdlib.h unistd.h fcntl.h sys/file.h +do +ac_safe=`echo "$ac_hdr" | tr './\055' '___'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | tr '[a-z]./\055' '[A-Z]___'` + cat >> confdefs.h <&6 +fi +done -for host in ${hosts} ; do - # Default other arg - if [ -z "${targets}" -o -n "${defaulttargets}" ] ; then - targets=${host} - defaulttargets=true - fi +for ac_func in sbrk utimes +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +char $ac_func(); + +int main() { return 0; } +int t() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if eval $ac_link; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* - host_alias=${host} +fi +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_func=HAVE_`echo $ac_func | tr '[a-z]' '[A-Z]'` + cat >> confdefs.h <&6 +fi +done + + +echo $ac_n "checking for time_t in time.h""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'bu_cv_decl_time_t_time_h'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +int main() { return 0; } +int t() { +time_t i; +; return 0; } +EOF +if eval $ac_compile; then + rm -rf conftest* + bu_cv_decl_time_t_time_h=yes +else + rm -rf conftest* + bu_cv_decl_time_t_time_h=no +fi +rm -f conftest* - result=`/bin/sh ./config.sub ${host}` - host_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` - host_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` - host_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` - host=${host_cpu}-${host_vendor}-${host_os} - host_makefile_frag=config/hmake-${host} +fi -#### configure.in per-host parts come in here. +echo "$ac_t""$bu_cv_decl_time_t_time_h" 1>&6 +if test $bu_cv_decl_time_t_time_h = yes; then + cat >> confdefs.h <<\EOF +#define HAVE_TIME_T_IN_TIME_H 1 +EOF + +fi -if [ "${host_os}" = "posix" ] ; then - my_host=posix +echo $ac_n "checking for time_t in sys/types.h""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'bu_cv_decl_time_t_types_h'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 else - case "${host_cpu}" in - rs6000) my_host=aix ;; - mips) - case "${host_vendor}" in - dec) my_host=dec3100 ;; - esac - ;; - m88k) - case "${host_vendor}" in - *) - case "${host_os}" in - dgux) my_host=dgux ;; - esac - ;; - esac - ;; - - m68k) - case "${host_vendor}" in - hp) my_host=hp9000 ;; - sony) my_host=news ;; - sun) my_host=sun3 ;; - esac - ;; - - i386) - case "${host_vendor}" in - *) - case "${host_os}" in - sysv) my_host=i386v ;; - esac - ;; - esac - ;; - - sparc) - case "${host_vendor}" in - sun) my_host=sun4 ;; - esac - ;; - - rtpc) my_host=rtbsd ;; - tahoe | vax) my_host=${host_cpu} ;; - esac + cat > conftest.$ac_ext < +int main() { return 0; } +int t() { +time_t i; +; return 0; } +EOF +if eval $ac_compile; then + rm -rf conftest* + bu_cv_decl_time_t_types_h=yes +else + rm -rf conftest* + bu_cv_decl_time_t_types_h=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$bu_cv_decl_time_t_types_h" 1>&6 +if test $bu_cv_decl_time_t_types_h = yes; then + cat >> confdefs.h <<\EOF +#define HAVE_TIME_T_IN_TYPES_H 1 +EOF + +fi + +# Under Next 3.2 apparently does not define struct utimbuf +# by default. +echo $ac_n "checking for utime.h""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'bu_cv_header_utime_h'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#ifdef HAVE_TIME_H +#include +#endif +#include +int main() { return 0; } +int t() { +struct utimbuf s; +; return 0; } +EOF +if eval $ac_compile; then + rm -rf conftest* + bu_cv_header_utime_h=yes +else + rm -rf conftest* + bu_cv_header_utime_h=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$bu_cv_header_utime_h" 1>&6 +if test $bu_cv_header_utime_h = yes; then + cat >> confdefs.h <<\EOF +#define HAVE_GOOD_UTIME_H 1 +EOF + fi -if [ ! -f config/hmake-${my_host} ] ; then - echo '***' Binutils do not support host ${host} - exit 1 -fi - -host_makefile_frag=config/hmake-${my_host} - -## end of per-host part. - - for target in ${targets} ; do - - target_alias=${target} - result=`/bin/sh ./config.sub ${target}` - target_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` - target_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` - target_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` - target=${target_cpu}-${target_vendor}-${target_os} - target_makefile_frag=config/tmake-${target} - -#### configure.in per-target parts come in here. - -files= -links= -## end of per-target part. - - # Temporarily, we support only direct subdir builds. - hostsubdir=H-${host_alias} - targetsubdir=T-${target_alias} - - if [ -n "${removing}" ] ; then - if [ -n "${subdirs}" ] ; then - if [ -d "${hostsubdir}" ] ; then - rm -rf ${hostsubdir}/${targetsubdir} - - if [ -z "`(ls ${hostsubdir}) 2>&1 | grep Target- | grep -v Target-independent`" ] ; then - rm -rf ${hostsubdir} - fi - else - echo Warning: no `pwd`/${hostsubdir} to remove. - fi - else - rm -f ${Makefile} config.status ${links} - fi - else - if [ -n "${subdirs}" ] ; then - # check for existing status before allowing forced subdirs. - if [ -f ${Makefile} ] ; then - echo '***' "${Makefile} already exists in source directory. `pwd` not configured." 1>&2 - exit 1 - fi - - if [ ! -d ${hostsubdir} ] ; then mkdir ${hostsubdir} ; fi - cd ${hostsubdir} - - if [ ! -d ${targetsubdir} ] ; then - if [ -z "${commontargets}" ] ; then - mkdir ${targetsubdir} - else - if [ ! -d Target-independent ] ; then - mkdir Target-independent - fi - - ${symbolic_link} Target-independent ${targetsubdir} - fi # if target independent - fi # if no target dir yet - - cd ${targetsubdir} - - srcdir=../.. - else - # if not subdir builds, then make sure none exist. - if [ -n "`(ls .) 2>&1 | grep Host-`" ] ; then - echo '***' "Configured subdirs exist. `pwd` not configured." 1>&2 - exit 1 - fi - fi - - # Find the source files, if location was not specified. - if [ -z "${srcdir}" ] ; then - srcdirdefaulted=1 - srcdir=. - if [ -n "${srctrigger}" -a ! -r ${srctrigger} ] ; then - srcdir=.. - fi - fi - - if [ -n "${srctrigger}" -a ! -r ${srcdir}/${srctrigger} ] ; then - if [ -z "${srcdirdefaulted}" ] ; then - echo '***' "${progname}: Can't find ${srcname} sources in `pwd`/${srcdir}" 1>&2 - else - echo '***' "${progname}: Can't find ${srcname} sources in `pwd`/. or `pwd`/.." 1>&2 - fi - - echo '***' \(At least ${srctrigger} is missing.\) 1>&2 - exit 1 - fi - - # Set up the list of links to be made. - # ${links} is the list of link names, and ${files} is the list of names to link to. - - # Make the links. - while [ -n "${files}" ] ; do - # set file to car of files, files to cdr of files - set ${files}; file=$1; shift; files=$* - set ${links}; link=$1; shift; links=$* - - if [ ! -r ${srcdir}/${file} ] ; then - echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2 - echo '***' "since the file \"${file}\" does not exist." 1>&2 - exit 1 - fi - - ${remove} -f ${link} - rm -f config.status - # Make a symlink if possible, otherwise try a hard link - ${symbolic_link} ${srcdir}/${file} ${link} 2>/dev/null || ${hard_link} ${srcdir}/${file} ${link} - - if [ ! -r ${link} ] ; then - echo '***' "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2 - exit 1 - fi - - if [ -n "${verbose}" ] ; then - echo "Linked \"${link}\" to \"${srcdir}/${file}\"." - fi - done - - # Create a .gdbinit file which runs the one in srcdir - # and tells GDB to look there for source files. - - case ${srcdir} in - .) - ;; - *) - echo "dir ." > .gdbinit - echo "dir ${srcdir}" >> .gdbinit - echo "source ${srcdir}/.gdbinit" >> .gdbinit - ;; - esac - - # Install a makefile, and make it set VPATH - # if necessary so that the sources are found. - # Also change its value of srcdir. - - # FIXME-someday: This business of always writing to .tem and mv back - # is so that I don't screw things up while developing. Once this - # template is stable, these should be optimized. xoxorich. - - # Define macro CROSS_COMPILE in compilation if this is a cross-compiler. - if [ "${host}" != "${target}" ] ; then - echo "CROSS=-DCROSS_COMPILE" > ${Makefile} - echo "ALL=start.encap" >> ${Makefile} - else - echo "ALL=all.internal" > ${Makefile} - fi - - # set target, host, VPATH - echo "host_alias = ${host_alias}" >> ${Makefile} - echo "host_cpu = ${host_cpu}" >> ${Makefile} - echo "host_vendor = ${host_vendor}" >> ${Makefile} - echo "host_os = ${host_os}" >> ${Makefile} - - echo "target_alias = ${target_alias}" >> ${Makefile} - echo "target_cpu = ${target_cpu}" >> ${Makefile} - echo "target_vendor = ${target_vendor}" >> ${Makefile} - echo "target_os = ${target_os}" >> ${Makefile} - - if [ -n "${subdirs}" ] ; then - echo "subdir = /${hostsubdir}/${targetsubdir}" >> ${Makefile} - else - echo "subdir =" >> ${Makefile} - fi - - # echo "workdir = `pwd`" >> ${Makefile} - echo "VPATH = ${srcdir}" >> ${Makefile} - - # add "Makefile.in" (or whatever it's called) - cat ${srcdir}/${Makefile_in} >> ${Makefile} - - # Conditionalize the makefile for this host. - if [ -f ${srcdir}/${host_makefile_frag} ] ; then - (echo "host_makefile_frag = ${srcdir}/${host_makefile_frag}" ; - sed -e "/^####/ r ${srcdir}/${host_makefile_frag}" ${Makefile}) > Makefile.tem - mv Makefile.tem ${Makefile} - fi - - # Conditionalize the makefile for this target. - if [ -f ${srcdir}/${target_makefile_frag} ] ; then - (echo "target_makefile_frag = ${srcdir}/${target_makefile_frag}" ; - sed -e "/^####/ r ${srcdir}/${target_makefile_frag}" ${Makefile}) > Makefile.tem - mv Makefile.tem ${Makefile} - fi - - # set srcdir - sed "s@^srcdir = \.@srcdir = ${srcdir}@" ${Makefile} > Makefile.tem - mv Makefile.tem ${Makefile} - - # set destdir - if [ -n "${destdir}" ] ; then - sed "s:^destdir =.*$:destdir = ${destdir}:" ${Makefile} > Makefile.tem - mv Makefile.tem ${Makefile} - fi - - # reset SUBDIRS - sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" ${Makefile} > Makefile.tem - mv Makefile.tem ${Makefile} - - # reset NONSUBDIRS - sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" ${Makefile} > Makefile.tem - mv Makefile.tem ${Makefile} - - using= - if [ -f ${srcdir}/${host_makefile_frag} ] ; then - using=" using \"${host_makefile_frag}\"" - fi - - # remove any form feeds. - sed -e "s/ //" ${Makefile} > Makefile.tem - mv Makefile.tem ${Makefile} - - if [ -f ${srcdir}/${target_makefile_frag} ] ; then - if [ -z "${using}" ] ; then - andusing=" using \"${target_makefile_frag}\"" - else - andusing="${using} and \"${target_makefile_frag}\"" - fi - else - andusing=${using} - fi - - if [ -n "${verbose}" -o -z "${recurring}" ] ; then - echo "Created \"${Makefile}\"" in `pwd`${andusing}. - fi - -#### configure.in post-target parts come in here. - -## end of post-target part. - - # describe the chosen configuration in config.status. - # Make that file a shellscript which will reestablish - # the same configuration. Used in Makefiles to rebuild - # Makefiles. - - echo "#!/bin/sh -# ${srcname} was configured as follows: -${srcdir}/configure" ${arguments} `if [ -z "${norecursion}" ] ; then echo +norecursion ; else true ; fi` > config.status - chmod a+x config.status - - originaldir=`pwd` - cd ${srcdir} - fi - - # If there are subdirectories, then recurse. - if [ -z "${norecursion}" -a -n "${configdirs}" ] ; then - for configdir in ${configdirs} ; do - if [ -n "${verbose}" ] ; then - echo Configuring ${configdir}... - fi - - if [ -d ${configdir} ] ; then - (cd ${configdir} ; - ./configure +recurring ${host_alias} +target=${target_alias} \ - ${verbose} ${subdirs} ${removing} +destdir=${destdir}) \ - | sed 's/^/ /' - else - if [ -n "${verbose}" ] ; then - echo Warning: directory \"${configdir}\" is missing. - fi - fi - done - fi - done # for each target - - # Now build a Makefile for this host. - if [ -n "${subdirs}" -a ! -n "${removing}" ] ; then - cd ${hostsubdir} - cat > GNUmakefile << E!O!F -# Makefile generated by configure for host ${host_alias}. - -ALL := $(shell ls -d Target-*) - -%: - $(foreach subdir,$(ALL),$(MAKE) -C $(subdir) \$@ &&) true - -all: -E!O!F - cd .. +echo $ac_n "checking whether fprintf must be declared""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'bu_cv_decl_needed_fprintf'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +int main() { return 0; } +int t() { +int (*pfn) = (int (*)) fprintf +; return 0; } +EOF +if eval $ac_compile; then + rm -rf conftest* + bu_cv_decl_needed_fprintf=no +else + rm -rf conftest* + bu_cv_decl_needed_fprintf=yes +fi +rm -f conftest* + +fi + +echo "$ac_t""$bu_cv_decl_needed_fprintf" 1>&6 +if test $bu_cv_decl_needed_fprintf = yes; then + cat >> confdefs.h <<\EOF +#define NEED_DECLARATION_FPRINTF 1 +EOF + +fi + +case "${host}" in +i34586-*-msdos* | i34586-*-go32* | i34586-*-win32) + cat >> confdefs.h <<\EOF +#define USE_BINARY_FOPEN 1 +EOF + ;; +esac + +# target-specific stuff: + +# Canonicalize the secondary target names. +target_makefile_fragment=/dev/null +if test -n "$enable_targets"; then + for targ in `echo $enable_targets | sed 's/,/ /g'` + do + result=`$ac_config_sub $targ 2>/dev/null` + if test -n "$result"; then + canon_targets="$canon_targets $result" + else + # Allow targets that config.sub doesn't recognize, like "all". + canon_targets="$canon_targets $targ" fi -done # for each host + done +else + # If our target is rs6000 _and nothing else_ then we build only nm! + case $target in + rs6000-*-lynx*) target_makefile_fragment=${srcdir}/config/rslynx ;; + esac +fi -exit 0 +all_targets=false +BUILD_NLMCONV= +NLMCONV_DEFS= +BUILD_SRCONV= +BUILD_DLLTOOL= +DLLTOOL_DEFS= + +for targ in $target $canon_targets +do + if test "x$targ" = "xall"; then + all_targets=true + BUILD_NLMCONV='$(NLMCONV_PROG)' + BUILD_SRCONV='$(SRCONV_PROG)' + NLMCONV_DEFS="-DNLMCONV_I386 -DNLMCONV_ALPHA -DNLMCONV_POWERPC -DNLMCONV_SPARC" + else + case $targ in + i[345]86*-*-netware*) + BUILD_NLMCONV='$(NLMCONV_PROG)' + NLMCONV_DEFS="$NLMCONV_DEFS -DNLMCONV_I386" + ;; + alpha*-*-netware*) + BUILD_NLMCONV='$(NLMCONV_PROG)' + NLMCONV_DEFS="$NLMCONV_DEFS -DNLMCONV_ALPHA" + ;; + powerpc*-*-netware*) + BUILD_NLMCONV='$(NLMCONV_PROG)' + NLMCONV_DEFS="$NLMCONV_DEFS -DNLMCONV_POWERPC" + ;; + sparc*-*-netware*) + BUILD_NLMCONV='$(NLMCONV_PROG)' + NLMCONV_DEFS="$NLMCONV_DEFS -DNLMCONV_SPARC" + ;; + esac + case $targ in + *-*-hms*) BUILD_SRCONV='$(SRCONV_PROG)' ;; + esac + case $targ in + arm-*pe*) + BUILD_DLLTOOL='$(DLLTOOL_PROG)' + DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_ARM" + ;; + i[3-6]86-*pe* | i[3-6]86-*-win32) + BUILD_DLLTOOL='$(DLLTOOL_PROG)' + DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_I386" + ;; + esac + fi +done + + + + + + + +targ=$target +. $srcdir/../bfd/config.bfd +if test "x$targ_underscore" = "xyes"; then + UNDERSCORE=1 +else + UNDERSCORE=0 +fi + + +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \ + >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + +trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 + +DEFS=-DHAVE_CONFIG_H + +# Without the "./", some shells look in PATH for config.status. +: ${CONFIG_STATUS=./config.status} + +echo creating $CONFIG_STATUS +rm -f $CONFIG_STATUS +cat > $CONFIG_STATUS </dev/null | sed 1q`: # -# Local Variables: -# fill-column: 131 -# End: +# $0 $ac_configure_args # +# Compiler output produced by configure, useful for debugging +# configure, is in ./config.log if it exists. + +ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +for ac_option +do + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" + exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "$CONFIG_STATUS generated by autoconf version 2.4" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; + esac +done + +ac_given_srcdir=$srcdir +ac_given_INSTALL="$INSTALL" + +trap 'rm -fr `echo "Makefile config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 + +# Protect against being on the right side of a sed subst in config.status. +sed 's/%@/@@/; s/@%/@@/; s/%g$/@g/; /@g$/s/[\\\\&%]/\\\\&/g; + s/@@/%@/; s/@@/@%/; s/@g$/%g/' > conftest.subs <<\CEOF +$ac_vpsub +$extrasub +s%@CFLAGS@%$CFLAGS%g +s%@CPPFLAGS@%$CPPFLAGS%g +s%@CXXFLAGS@%$CXXFLAGS%g +s%@DEFS@%$DEFS%g +s%@LDFLAGS@%$LDFLAGS%g +s%@LIBS@%$LIBS%g +s%@exec_prefix@%$exec_prefix%g +s%@prefix@%$prefix%g +s%@program_transform_name@%$program_transform_name%g +s%@host@%$host%g +s%@host_alias@%$host_alias%g +s%@host_cpu@%$host_cpu%g +s%@host_vendor@%$host_vendor%g +s%@host_os@%$host_os%g +s%@target@%$target%g +s%@target_alias@%$target_alias%g +s%@target_cpu@%$target_cpu%g +s%@target_vendor@%$target_vendor%g +s%@target_os@%$target_os%g +s%@build@%$build%g +s%@build_alias@%$build_alias%g +s%@build_cpu@%$build_cpu%g +s%@build_vendor@%$build_vendor%g +s%@build_os@%$build_os%g +s%@CC@%$CC%g +s%@HDEFINES@%$HDEFINES%g +s%@AR@%$AR%g +s%@RANLIB@%$RANLIB%g +s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_DATA@%$INSTALL_DATA%g +s%@CPP@%$CPP%g +/@target_makefile_fragment@/r $target_makefile_fragment +s%@target_makefile_fragment@%%g +s%@NLMCONV_DEFS@%$NLMCONV_DEFS%g +s%@BUILD_NLMCONV@%$BUILD_NLMCONV%g +s%@BUILD_SRCONV@%$BUILD_SRCONV%g +s%@BUILD_DLLTOOL@%$BUILD_DLLTOOL%g +s%@DLLTOOL_DEFS@%$DLLTOOL_DEFS%g +s%@UNDERSCORE@%$UNDERSCORE%g + +CEOF +EOF +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then + # Support "outfile[:infile]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + # Adjust relative srcdir, etc. for subdirectories. + + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dir_suffix= ac_dots= + fi + + case "$ac_given_srcdir" in + .) srcdir=. + if test -z "$ac_dots"; then top_srcdir=. + else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + case "$ac_given_INSTALL" in + [/$]*) INSTALL="$ac_given_INSTALL" ;; + *) INSTALL="$ac_dots$ac_given_INSTALL" ;; + esac + echo creating "$ac_file" + rm -f "$ac_file" + configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." + case "$ac_file" in + *Makefile*) ac_comsub="1i\\ +# $configure_input" ;; + *) ac_comsub= ;; + esac + sed -e "$ac_comsub +s%@configure_input@%$configure_input%g +s%@srcdir@%$srcdir%g +s%@top_srcdir@%$top_srcdir%g +s%@INSTALL@%$INSTALL%g +" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file +fi; done +rm -f conftest.subs + +# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +# NAME is the cpp macro being defined and VALUE is the value it is being given. +# +# ac_d sets the value in "#define NAME VALUE" lines. +ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' +ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' +ac_dC='\3' +ac_dD='%g' +# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". +ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_uB='\([ ]\)%\1#\2define\3' +ac_uC=' ' +ac_uD='\4%g' +# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_eB='$%\1#\2define\3' +ac_eC=' ' +ac_eD='%g' + +CONFIG_HEADERS=${CONFIG_HEADERS-"config.h"} +for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then + # Support "outfile[:infile]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + echo creating $ac_file + + rm -f conftest.frag conftest.in conftest.out + cp $ac_given_srcdir/$ac_file_in conftest.in + +EOF + +# Transform confdefs.h into a sed script conftest.vals that substitutes +# the proper values into config.h.in to produce config.h. And first: +# Protect against being on the right side of a sed subst in config.status. +# Protect against being in an unquoted here document in config.status. +rm -f conftest.vals +cat > conftest.hdr <<\EOF +s/[\\&%]/\\&/g +s%[\\$`]%\\&%g +s%#define \([A-Za-z_][A-Za-z0-9_]*\) \(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp +s%ac_d%ac_u%gp +s%ac_u%ac_e%gp +EOF +sed -n -f conftest.hdr confdefs.h > conftest.vals +rm -f conftest.hdr + +# This sed command replaces #undef with comments. This is necessary, for +# example, in the case of _POSIX_SOURCE, which is predefined and required +# on some systems where configure will not decide to define it. +cat >> conftest.vals <<\EOF +s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% +EOF + +# Break up conftest.vals because some shells have a limit on +# the size of here documents, and old seds have small limits too. +# Maximum number of lines to put in a single here document. +ac_max_here_lines=12 + +rm -f conftest.tail +while : +do + ac_lines=`grep -c . conftest.vals` + # grep -c gives empty output for an empty file on some AIX systems. + if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi + # Write a limited-size here document to conftest.frag. + echo ' cat > conftest.frag <> $CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS + echo 'CEOF + sed -f conftest.frag conftest.in > conftest.out + rm -f conftest.in + mv conftest.out conftest.in +' >> $CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail + rm -f conftest.vals + mv conftest.tail conftest.vals +done +rm -f conftest.vals + +cat >> $CONFIG_STATUS <<\EOF + rm -f conftest.frag conftest.h + echo "/* $ac_file. Generated automatically by configure. */" > conftest.h + cat conftest.in >> conftest.h + rm -f conftest.in + if cmp -s $ac_file conftest.h 2>/dev/null; then + echo "$ac_file is unchanged" + rm -f conftest.h + else + rm -f $ac_file + mv conftest.h $ac_file + fi +fi; done + + +case x$CONFIG_HEADERS in xconfig.h) echo > stamp-h ;; esac +exit 0 +EOF +chmod +x $CONFIG_STATUS +rm -fr confdefs* $ac_clean_files +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 -# end of configure diff --git a/binutils/configure.in b/binutils/configure.in index 878aa289673..2113844a932 100644 --- a/binutils/configure.in +++ b/binutils/configure.in @@ -1,23 +1,107 @@ -# This file is a shell script that supplies the information necessary -# to tailor a template configure script into the configure script -# appropriate for this directory. For more information, check any -# existing configure script. +dnl Process this file with autoconf to produce a configure script. +dnl +AC_PREREQ(2.0) +AC_INIT(ar.c) + +AC_ARG_ENABLE(targets, +[ --enable-targets alternative target configurations], +[case "${enableval}" in + yes | "") AC_ERROR(enable-targets option must specify target names or 'all') + ;; + no) enable_targets= ;; + *) enable_targets=$enableval ;; +esac])dnl + +AC_CONFIG_HEADER(config.h) + +AC_CONFIG_AUX_DIR(`cd $srcdir/..; pwd`) +AC_CANONICAL_SYSTEM +if test -z "$target" ; then + AC_MSG_ERROR(Unrecognized target system type; please check config.sub.) +fi +if test -z "$host" ; then + AC_MSG_ERROR(Unrecognized host system type; please check config.sub.) +fi +AC_ARG_PROGRAM -srctrigger=ar.c -srcname="Binutils" +# host-specific stuff: -# per-host: +HDEFINES= +LDFLAGS= . ${srcdir}/../bfd/configure.host -# per-target: +AC_PROG_CC +AC_SUBST(CFLAGS) +AC_SUBST(HDEFINES) +AC_SUBST(LDFLAGS) +AR=${AR-ar} +AC_SUBST(AR) +AC_PROG_RANLIB +AC_PROG_INSTALL + +AC_CHECK_HEADERS(string.h strings.h stdlib.h unistd.h fcntl.h sys/file.h) +AC_CHECK_FUNCS(sbrk utimes) + +AC_MSG_CHECKING(for time_t in time.h) +AC_CACHE_VAL(bu_cv_decl_time_t_time_h, +[AC_TRY_COMPILE([#include ], [time_t i;], +bu_cv_decl_time_t_time_h=yes, bu_cv_decl_time_t_time_h=no)]) +AC_MSG_RESULT($bu_cv_decl_time_t_time_h) +if test $bu_cv_decl_time_t_time_h = yes; then + AC_DEFINE([HAVE_TIME_T_IN_TIME_H]) +fi + +AC_MSG_CHECKING(for time_t in sys/types.h) +AC_CACHE_VAL(bu_cv_decl_time_t_types_h, +[AC_TRY_COMPILE([#include ], [time_t i;], +bu_cv_decl_time_t_types_h=yes, bu_cv_decl_time_t_types_h=no)]) +AC_MSG_RESULT($bu_cv_decl_time_t_types_h) +if test $bu_cv_decl_time_t_types_h = yes; then + AC_DEFINE([HAVE_TIME_T_IN_TYPES_H]) +fi + +# Under Next 3.2 apparently does not define struct utimbuf +# by default. +AC_MSG_CHECKING([for utime.h]) +AC_CACHE_VAL(bu_cv_header_utime_h, +[AC_TRY_COMPILE([#include +#ifdef HAVE_TIME_H +#include +#endif +#include ], +[struct utimbuf s;], +bu_cv_header_utime_h=yes, bu_cv_header_utime_h=no)]) +AC_MSG_RESULT($bu_cv_header_utime_h) +if test $bu_cv_header_utime_h = yes; then + AC_DEFINE(HAVE_GOOD_UTIME_H) +fi + +AC_MSG_CHECKING([whether fprintf must be declared]) +AC_CACHE_VAL(bu_cv_decl_needed_fprintf, +[AC_TRY_COMPILE([#include ], +[int (*pfn) = (int (*)) fprintf], +bu_cv_decl_needed_fprintf=no, bu_cv_decl_needed_fprintf=yes)]) +AC_MSG_RESULT($bu_cv_decl_needed_fprintf) +if test $bu_cv_decl_needed_fprintf = yes; then + AC_DEFINE(NEED_DECLARATION_FPRINTF) +fi + +dnl FIXME: We should check this in some central place somehow +case "${host}" in +i[345]86-*-msdos* | i[345]86-*-go32* | i[345]86-*-win32) + AC_DEFINE(USE_BINARY_FOPEN) ;; +esac + +# target-specific stuff: # Canonicalize the secondary target names. -if [ -n "$enable_targets" ]; then +target_makefile_fragment=/dev/null +if test -n "$enable_targets"; then for targ in `echo $enable_targets | sed 's/,/ /g'` do - result=`$configsub $targ 2>/dev/null` - if [ -n "$result" ]; then + result=`$ac_config_sub $targ 2>/dev/null` + if test -n "$result"; then canon_targets="$canon_targets $result" else # Allow targets that config.sub doesn't recognize, like "all". @@ -25,98 +109,80 @@ if [ -n "$enable_targets" ]; then fi done else -# If our target is rs6000 _and nothing else_ then we build only nm! + # If our target is rs6000 _and nothing else_ then we build only nm! case $target in - rs6000-*-lynx*) target_makefile_frag=config/rslynx ;; + rs6000-*-lynx*) target_makefile_fragment=${srcdir}/config/rslynx ;; esac fi +AC_SUBST_FILE(target_makefile_fragment) all_targets=false -build_nlmconv=false -nlmconv_defs= -build_srconv=false -build_dlltool=false -dlltool_defs= +BUILD_NLMCONV= +NLMCONV_DEFS= +BUILD_SRCONV= +BUILD_DLLTOOL= +DLLTOOL_DEFS= for targ in $target $canon_targets do - if [ "x$targ" = "xall" ]; then + if test "x$targ" = "xall"; then all_targets=true - build_nlmconv=true - build_srconv=true - nlmconv_defs="-DNLMCONV_I386 -DNLMCONV_ALPHA -DNLMCONV_POWERPC -DNLMCONV_SPARC" + BUILD_NLMCONV='$(NLMCONV_PROG)' + BUILD_SRCONV='$(SRCONV_PROG)' + NLMCONV_DEFS="-DNLMCONV_I386 -DNLMCONV_ALPHA -DNLMCONV_POWERPC -DNLMCONV_SPARC" else case $targ in +changequote(,)dnl i[345]86*-*-netware*) - build_nlmconv=true - nlmconv_defs="$nlmconv_defs -DNLMCONV_I386" +changequote([,])dnl + BUILD_NLMCONV='$(NLMCONV_PROG)' + NLMCONV_DEFS="$NLMCONV_DEFS -DNLMCONV_I386" ;; alpha*-*-netware*) - build_nlmconv=true - nlmconv_defs="$nlmconv_defs -DNLMCONV_ALPHA" + BUILD_NLMCONV='$(NLMCONV_PROG)' + NLMCONV_DEFS="$NLMCONV_DEFS -DNLMCONV_ALPHA" ;; powerpc*-*-netware*) - build_nlmconv=true - nlmconv_defs="$nlmconv_defs -DNLMCONV_POWERPC" + BUILD_NLMCONV='$(NLMCONV_PROG)' + NLMCONV_DEFS="$NLMCONV_DEFS -DNLMCONV_POWERPC" ;; sparc*-*-netware*) - build_nlmconv=true - nlmconv_defs="$nlmconv_defs -DNLMCONV_SPARC" + BUILD_NLMCONV='$(NLMCONV_PROG)' + NLMCONV_DEFS="$NLMCONV_DEFS -DNLMCONV_SPARC" ;; esac case $targ in - *-*-hms*) build_srconv=true ;; + *-*-hms*) BUILD_SRCONV='$(SRCONV_PROG)' ;; esac case $targ in arm-*pe*) - build_dlltool=true; - dlltool_defs="$dlltool_defs -DDLLTOOL_ARM" + BUILD_DLLTOOL='$(DLLTOOL_PROG)' + DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_ARM" ;; +changequote(,)dnl i[3-6]86-*pe* | i[3-6]86-*-win32) - build_dlltool=true; - dlltool_defs="$dlltool_defs -DDLLTOOL_I386" +changequote([,])dnl + BUILD_DLLTOOL='$(DLLTOOL_PROG)' + DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_I386" ;; esac fi done -# We don't do any links based on the target system, just makefile config. - -# post-target: - -rm -f Makefile.tmp Makefile.2 -mv Makefile Makefile.tmp - -if [ "x${build_nlmconv}" = "xtrue" ]; then - echo 'BUILD_NLMCONV = $(NLMCONV_PROG)' >> Makefile.2 - echo "NLMCONV_DEFS = ${nlmconv_defs}" >> Makefile.2 -fi - -if [ "x${build_srconv}" = "xtrue" ]; then - echo 'BUILD_SRCONV = $(SRCONV_PROG)' >> Makefile.2 -fi - -if [ "x${build_dlltool}" = "xtrue" ]; then - echo 'BUILD_DLLTOOL = $(DLLTOOL_PROG)' >> Makefile.2 - echo "DLLTOOL_DEFS = ${dlltool_defs}" >> Makefile.2 -fi +AC_SUBST(NLMCONV_DEFS) +AC_SUBST(BUILD_NLMCONV) +AC_SUBST(BUILD_SRCONV) +AC_SUBST(BUILD_DLLTOOL) +AC_SUBST(DLLTOOL_DEFS) targ=$target . $srcdir/../bfd/config.bfd if test "x$targ_underscore" = "xyes"; then - underscore=1 + UNDERSCORE=1 else - underscore=0 + UNDERSCORE=0 fi -echo "UNDERSCORE = ${underscore}" >> Makefile.2 - -test -z "$CC" && CC=`egrep '^CC *=' ../Makefile | tail -1 | sed 's/^CC *= *//'` -test -z "$CC" && CC=cc -test -z "$CFLAGS" && CFLAGS=-g -sed -e "s%@CC@%${CC}%" \ - -e "s%@CFLAGS@%${CFLAGS}%" \ - -e "s%@HDEFINES@%${HDEFINES}%" \ - -e "s%@LDFLAGS@%${LDFLAGS}%" < Makefile.tmp >> Makefile.2 - -rm -f Makefile.tmp -mv Makefile.2 Makefile +AC_SUBST(UNDERSCORE) + +AC_OUTPUT(Makefile, +[case x$CONFIG_HEADERS in xconfig.h) echo > stamp-h ;; esac]) -- 2.30.2