From 61447331bd5540b1d720fe06fdbec85ec297aaaf Mon Sep 17 00:00:00 2001 From: Luca Ceresoli Date: Thu, 3 May 2018 18:23:34 +0200 Subject: [PATCH] arm-trusted-firmware: generate atf-uboot.ub image of bl31.bin U-Boot SPL for the Xilinx ZynqMP SoCs needs ATF in this format to load it. Signed-off-by: Luca Ceresoli Signed-off-by: Thomas Petazzoni --- boot/arm-trusted-firmware/Config.in | 8 +++++++ .../arm-trusted-firmware.mk | 21 +++++++++++++++++++ 2 files changed, 29 insertions(+) diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in index 7aef87cb74..885d93e62f 100644 --- a/boot/arm-trusted-firmware/Config.in +++ b/boot/arm-trusted-firmware/Config.in @@ -71,6 +71,14 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 typically used on platforms where another bootloader (e.g U-Boot) encapsulates ATF BL31. +config BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT + bool "Build BL31 U-Boot image" + select BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 + help + Generates a U-Boot image named atf-uboot.ub containing + bl31.bin. This is used for example by the Xilinx version of + U-Boot SPL to load ATF on the ZynqMP SoC. + config BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33 bool "Use U-Boot as BL33" depends on BR2_TARGET_UBOOT diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk index 212bb5049f..054a000a1d 100644 --- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk +++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk @@ -75,15 +75,36 @@ ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31),y) ARM_TRUSTED_FIRMWARE_MAKE_TARGETS += bl31 endif +ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT),y) +define ARM_TRUSTED_FIRMWARE_BL31_UBOOT_BUILD +# Get the entry point address from the elf. + BASE_ADDR=$$($(TARGET_READELF) -h $(ARM_TRUSTED_FIRMWARE_IMG_DIR)/bl31/bl31.elf | \ + sed -r '/^ Entry point address:\s*(.*)/!d; s//\1/') && \ + $(HOST_DIR)/bin/mkimage \ + -A arm64 -O arm-trusted-firmware -C none \ + -a $${BASE_ADDR} -e $${BASE_ADDR} \ + -d $(ARM_TRUSTED_FIRMWARE_IMG_DIR)/bl31.bin \ + $(ARM_TRUSTED_FIRMWARE_IMG_DIR)/atf-uboot.ub +endef +define ARM_TRUSTED_FIRMWARE_BL31_UBOOT_INSTALL + $(INSTALL) -m 0644 $(ARM_TRUSTED_FIRMWARE_IMG_DIR)/atf-uboot.ub \ + $(BINARIES_DIR)/atf-uboot.ub +endef +ARM_TRUSTED_FIRMWARE_MAKE_OPTS += RESET_TO_BL31=1 +ARM_TRUSTED_FIRMWARE_DEPENDENCIES += host-uboot-tools +endif + define ARM_TRUSTED_FIRMWARE_BUILD_CMDS $(ARM_TRUSTED_FIRMWARE_BUILD_FIPTOOL) $(TARGET_CONFIGURE_OPTS) \ $(MAKE) -C $(@D) $(ARM_TRUSTED_FIRMWARE_MAKE_OPTS) \ $(ARM_TRUSTED_FIRMWARE_MAKE_TARGETS) + $(ARM_TRUSTED_FIRMWARE_BL31_UBOOT_BUILD) endef define ARM_TRUSTED_FIRMWARE_INSTALL_IMAGES_CMDS cp -dpf $(ARM_TRUSTED_FIRMWARE_IMG_DIR)/*.bin $(BINARIES_DIR)/ + $(ARM_TRUSTED_FIRMWARE_BL31_UBOOT_INSTALL) endef # Configuration check -- 2.30.2