From 62e02fb8e4cea1acc80e5eee7182fc2782accc33 Mon Sep 17 00:00:00 2001
From: Andrey Miroshnikov <andrey@technepisteme.xyz>
Date: Tue, 11 Jan 2022 23:34:44 +0000
Subject: [PATCH] Added some more JTAG test info

---
 docs/pinmux/temp_pinmux_info.mdwn | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/docs/pinmux/temp_pinmux_info.mdwn b/docs/pinmux/temp_pinmux_info.mdwn
index d88f09db2..75de052e6 100644
--- a/docs/pinmux/temp_pinmux_info.mdwn
+++ b/docs/pinmux/temp_pinmux_info.mdwn
@@ -9,6 +9,10 @@ Links:
 * <https://git.libre-soc.org/?p=soc.git;a=blob;f=src/soc/bus/simple_gpio.py;hb=HEAD>
 * <https://git.libre-soc.org/?p=pinmux.git;a=blob;f=src/spec/testing_stage1.py;hb=HEAD>
 * <https://git.libre-soc.org/?p=pinmux.git;a=blob;f=src/spec/simple_gpio.py;hb=HEAD>
+* ST Ericsson presentation on the GPIO subsystem: <https://ftp.libre-soc.org/Pin_Control_Subsystem_Overview.pdf>
+* Technical guide to JTAG: <https://www.corelis.com/education/tutorials/jtag-tutorial/jtag-technical-primer>
+* Presentation on JTAG: <http://www.facweb.iitkgp.ac.in/~isg/ADV-TESTING/SLIDES/5-JTAG.pdf>
+* Useful information on mandatory JTAG instructions: <https://www.corelis.com/education/tutorials/jtag-tutorial/jtag-technical-primer/#JTAG_Instructions> 
 
 The tasks initially set out by Luke in 2019 (bug 50 description):
 
@@ -118,6 +122,14 @@ The expected results are:
 1. All pad inputs and sim controlled input (output enables etc.) should be high.
 1. All signals should be high.
 
+These test cases are performed by the "jtag_unit_test" with selected JTAG
+ instructions (SAMPLE or EXTEST), data to send via TDI, and expected TDO data 
+vector. The TDO and TDI data is compared using asserts.
+
+NOTE: Currently the last test case's TDO data does not match the actual 
+core/pad signal values. Not sure why the returned TDO is icorrect, however 
+the signals are correct.
+
 # Simple GPIO extension
 The code from soc repo was taken and is being extended to support full gpio capability
 TODO
-- 
2.30.2