From 68c7761c42060bf46b96a20b95b171aab312028e Mon Sep 17 00:00:00 2001 From: Fred Fish Date: Sun, 19 Jan 1997 22:24:21 +0000 Subject: [PATCH] * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd", "vsub", "vst", "xnor", and "xor" instructions. (V_a1): Renamed from V_a, msb of accumulator reg number. (V_a0): Add macro, lsb of accumulator reg number. --- opcodes/ChangeLog | 7 ++++ opcodes/tic80-opc.c | 95 +++++++++++++++++++++++++++++++++++++-------- 2 files changed, 86 insertions(+), 16 deletions(-) diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog index c28545e20fc..d26deb8e8fa 100644 --- a/opcodes/ChangeLog +++ b/opcodes/ChangeLog @@ -1,4 +1,11 @@ start-sanitize-tic80 +Sat Jan 18 15:15:05 1997 Fred Fish + + * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd", + "vsub", "vst", "xnor", and "xor" instructions. + (V_a1): Renamed from V_a, msb of accumulator reg number. + (V_a0): Add macro, lsb of accumulator reg number. + Fri Jan 17 18:24:31 1997 Fred Fish * tic80-dis.c (print_insn_tic80): Broke excessively long diff --git a/opcodes/tic80-opc.c b/opcodes/tic80-opc.c index bf8dc4f68cc..e87ed082ad1 100644 --- a/opcodes/tic80-opc.c +++ b/opcodes/tic80-opc.c @@ -240,7 +240,10 @@ const int tic80_num_operands = sizeof (tic80_operands)/sizeof(*tic80_operands); #define P1(x) ((x) << 5) /* The 'a' field at bit 16 in vector instructions */ -#define V_a(x) ((x) << 16) +#define V_a1(x) ((x) << 16) + +/* The 'a' field at bit 11 in vector instructions */ +#define V_a0(x) ((x) << 11) /* The 'm' field at bit 10 in vector instructions */ #define V_m(x) ((x) << 10) @@ -810,6 +813,13 @@ const struct tic80_opcode tic80_opcodes[] = { {"subu", OP_REG(0x3B6), MASK_REG, 0, {REG_0, REG_22, REG_DEST} }, {"subu", OP_LI(0x3B7), MASK_LI, 0, {LSI, REG_22, REG_DEST} }, + /* Write Control Register + Is a special form of the "swcr" instruction so comes before it in the table. */ + + {"wrcr", OP_SI(0x5), MASK_SI | (0x1F << 27), 0, {CR_SI, REG_22} }, + {"wrcr", OP_REG(0x30A), MASK_REG | (0x1F << 27), 0, {REG_0, REG_22} }, + {"wrcr", OP_LI(0x30B), MASK_LI | (0x1F << 27), 0, {CR_LI, REG_22} }, + /* Swap Control Register */ {"swcr", OP_SI(0x5), MASK_SI, 0, {CR_SI, REG_22, REG_DEST} }, @@ -824,30 +834,83 @@ const struct tic80_opcode tic80_opcodes[] = { /* Vector Floating-Point Add */ - {"vadd.ss", OP_REG(0x3C0) | P2(0) | P1(0), MASK_REG | V_a(1) | P2(1) | P1(1), TIC80_VECTOR, {REG_0, REG_22, REG_22} }, - {"vadd.sd", OP_REG(0x3C0) | P2(1) | P1(0), MASK_REG | V_a(1) | P2(1) | P1(1), TIC80_VECTOR, {REG_0, REG_22, REG_22} }, - {"vadd.dd", OP_REG(0x3C0) | P2(1) | P1(1), MASK_REG | V_a(1) | P2(1) | P1(1), TIC80_VECTOR, {REG_0, REG_22, REG_22} }, + {"vadd.ss", OP_REG(0x3C0) | P2(0) | P1(0), MASK_REG | V_a1(1) | P2(1) | P1(1), TIC80_VECTOR, {REG_0, REG_22, REG_22} }, + {"vadd.sd", OP_REG(0x3C0) | P2(1) | P1(0), MASK_REG | V_a1(1) | P2(1) | P1(1), TIC80_VECTOR, {REG_0, REG_22, REG_22} }, + {"vadd.dd", OP_REG(0x3C0) | P2(1) | P1(1), MASK_REG | V_a1(1) | P2(1) | P1(1), TIC80_VECTOR, {REG_0, REG_22, REG_22} }, + + {"vadd.ss", OP_LI(0x3C1) | P2(0) | P1(0), MASK_LI | V_a1(1) | P2(1) | P1(1), TIC80_VECTOR, {SPFI, REG_22, REG_22} }, + {"vadd.sd", OP_LI(0x3C1) | P2(1) | P1(0), MASK_LI | V_a1(1) | P2(1) | P1(1), TIC80_VECTOR, {SPFI, REG_22, REG_22} }, + + /* Vector Floating-Point Multiply and Add to Accumulator + FIXME! This is not yet implemented. From the documentation there appears to be no way to + tell the difference between the opcodes for instructions that have register destinations + and instructions that have accumulator destinations. Further investigation is necessary. + Since this isn't critical to getting a TIC80 toolchain up and running, it is defered + until later. */ + + /* Vector Floating-Point Multiply + Note: If r0 is in the destination reg, then this is a "vector nop" instruction. */ + + {"vmpy.ss", OP_REG(0x3C4) | P2(0) | P1(0), MASK_REG | V_a1(1) | P2(1) | P1(1), TIC80_VECTOR | TIC80_NO_R0_DEST, {REG_0, REG_22, REG_22} }, + {"vmpy.sd", OP_REG(0x3C4) | P2(1) | P1(0), MASK_REG | V_a1(1) | P2(1) | P1(1), TIC80_VECTOR | TIC80_NO_R0_DEST, {REG_0, REG_22, REG_22} }, + {"vmpy.dd", OP_REG(0x3C4) | P2(1) | P1(1), MASK_REG | V_a1(1) | P2(1) | P1(1), TIC80_VECTOR | TIC80_NO_R0_DEST, {REG_0, REG_22, REG_22} }, + + {"vmpy.ss", OP_LI(0x3C5) | P2(0) | P1(0), MASK_LI | V_a1(1) | P2(1) | P1(1), TIC80_VECTOR | TIC80_NO_R0_DEST, {SPFI, REG_22, REG_22} }, + {"vmpy.sd", OP_LI(0x3C5) | P2(1) | P1(0), MASK_LI | V_a1(1) | P2(1) | P1(1), TIC80_VECTOR | TIC80_NO_R0_DEST, {SPFI, REG_22, REG_22} }, + + /* Vector Floating-Point Multiply and Subtract from Accumulator + FIXME: See note above for vmac instruction */ - {"vadd.ss", OP_LI(0x3C1) | P2(0) | P1(0), MASK_LI | V_a(1) | P2(1) | P1(1), TIC80_VECTOR, {SPFI, REG_22, REG_22} }, - {"vadd.sd", OP_LI(0x3C1) | P2(1) | P1(0), MASK_LI | V_a(1) | P2(1) | P1(1), TIC80_VECTOR, {SPFI, REG_22, REG_22} }, + /* Vector Floating-Point Subtract Accumulator From Source + FIXME: See note above for vmac instruction */ - /* Vector Floating-Point Multiply and Add to Accumulator */ + /* Vector Round With Floating-Point Input + FIXME: See note above for vmac instruction */ - /* Vector Load Data Into Register - Note that this comes after all the other - vector instructions so that the disassembler will always print the load instruction - second for vector instructions that have two instructions in the same opcode. */ + /* Vector Round with Integer Input */ + + {"vrnd.is", OP_REG (0x3CA) | P2(0) | P1(0), MASK_REG | V_a0(1) | V_Z(1) | P2(1) | P1(1), TIC80_VECTOR, {REG_0, REG_22}}, + {"vrnd.us", OP_REG (0x3CA) | P2(0) | P1(1), MASK_REG | V_a0(1) | V_Z(1) | P2(1) | P1(1), TIC80_VECTOR, {REG_0, REG_22}}, + {"vrnd.id", OP_REG (0x3CA) | P2(1) | P1(0), MASK_REG | V_a0(1) | V_Z(1) | P2(1) | P1(1), TIC80_VECTOR, {REG_0, REG_22}}, + {"vrnd.ud", OP_REG (0x3CA) | P2(1) | P1(1), MASK_REG | V_a0(1) | V_Z(1) | P2(1) | P1(1), TIC80_VECTOR, {REG_0, REG_22}}, + + {"vrnd.is", OP_LI (0x3CB) | P2(0) | P1(0), MASK_LI | V_a0(1) | V_Z(1) | P2(1) | P1(1), TIC80_VECTOR, {LSI, REG_22}}, + {"vrnd.us", OP_LI (0x3CB) | P2(0) | P1(1), MASK_LI | V_a0(1) | V_Z(1) | P2(1) | P1(1), TIC80_VECTOR, {LUI, REG_22}}, + {"vrnd.id", OP_LI (0x3CB) | P2(1) | P1(0), MASK_LI | V_a0(1) | V_Z(1) | P2(1) | P1(1), TIC80_VECTOR, {LSI, REG_22}}, + {"vrnd.ud", OP_LI (0x3CB) | P2(1) | P1(1), MASK_LI | V_a0(1) | V_Z(1) | P2(1) | P1(1), TIC80_VECTOR, {LUI, REG_22}}, + + /* Vector Floating-Point Subtract */ + + {"vsub.ss", OP_REG(0x3C2) | P2(0) | P1(0), MASK_REG | V_a1(1) | P2(1) | P1(1), TIC80_VECTOR, {REG_0, REG_22, REG_22} }, + {"vsub.sd", OP_REG(0x3C2) | P2(1) | P1(0), MASK_REG | V_a1(1) | P2(1) | P1(1), TIC80_VECTOR, {REG_0, REG_22, REG_22} }, + {"vsub.dd", OP_REG(0x3C2) | P2(1) | P1(1), MASK_REG | V_a1(1) | P2(1) | P1(1), TIC80_VECTOR, {REG_0, REG_22, REG_22} }, + + {"vsub.ss", OP_LI(0x3C3) | P2(0) | P1(0), MASK_LI | V_a1(1) | P2(1) | P1(1), TIC80_VECTOR, {SPFI, REG_22, REG_22} }, + {"vsub.sd", OP_LI(0x3C3) | P2(1) | P1(0), MASK_LI | V_a1(1) | P2(1) | P1(1), TIC80_VECTOR, {SPFI, REG_22, REG_22} }, + + /* Vector Load Data Into Register - Note that the vector load/store instructions come after the other + vector instructions so that the disassembler will always print the load/store instruction second for + vector instructions that have two instructions in the same opcode. */ {"vld0.s", OP_V(0x1E) | V_m(1) | V_S(0) | V_p(0), MASK_V | V_m(1) | V_S(1) | V_p(1), TIC80_VECTOR, {REG_DEST} }, {"vld1.s", OP_V(0x1E) | V_m(1) | V_S(0) | V_p(1), MASK_V | V_m(1) | V_S(1) | V_p(1), TIC80_VECTOR, {REG_DEST} }, {"vld0.d", OP_V(0x1E) | V_m(1) | V_S(1) | V_p(0), MASK_V | V_m(1) | V_S(1) | V_p(1), TIC80_VECTOR, {REG_DEST} }, {"vld1.d", OP_V(0x1E) | V_m(1) | V_S(1) | V_p(1), MASK_V | V_m(1) | V_S(1) | V_p(1), TIC80_VECTOR, {REG_DEST} }, - {"xnor", OP_LI(0x333), MASK_LI, 0, FIXME}, - {"xnor", OP_REG(0x332), MASK_REG, 0, FIXME}, - {"xnor", OP_SI(0x19), MASK_SI, 0, FIXME}, - {"xor", OP_LI(0x32D), MASK_LI, 0, FIXME}, - {"xor", OP_REG(0x32C), MASK_REG, 0, FIXME}, - {"xor", OP_SI(0x16), MASK_SI, 0, FIXME}, + /* Vector Store Data Into Memory - Note that the vector load/store instructions come after the other + vector instructions so that the disassembler will always print the load/store instruction second for + vector instructions that have two instructions in the same opcode. */ + + {"vst.s", OP_V(0x1E) | V_m(0) | V_S(0) | V_p(1), MASK_V | V_m(1) | V_S(1) | V_p(1), TIC80_VECTOR, {REG_DEST} }, + {"vst.d", OP_V(0x1E) | V_m(0) | V_S(1) | V_p(1), MASK_V | V_m(1) | V_S(1) | V_p(1), TIC80_VECTOR, {REG_DEST} }, + + {"xnor", OP_SI(0x19), MASK_SI, 0, {SUBF, REG_22, REG_DEST} }, + {"xnor", OP_REG(0x332), MASK_REG, 0, {REG_0, REG_22, REG_DEST} }, + {"xnor", OP_LI(0x333), MASK_LI, 0, {LUBF, REG_22, REG_DEST} }, + + {"xor", OP_SI(0x16), MASK_SI, 0, {SUBF, REG_22, REG_DEST} }, + {"xor", OP_REG(0x32C), MASK_REG, 0, {REG_0, REG_22, REG_DEST} }, + {"xor", OP_LI(0x32D), MASK_LI, 0, {LUBF, REG_22, REG_DEST} }, }; -- 2.30.2