From 6e6ca40f29551b6f6cedea954874930e6470b0b9 Mon Sep 17 00:00:00 2001 From: Corbin Simpson Date: Sun, 15 Jun 2008 17:14:07 -0700 Subject: [PATCH] r300: Unbreak LOD biasing, a bit. Needs a bit more work on submission. --- src/mesa/drivers/dri/r300/r300_tex.c | 67 ++++++++++++++-------------- 1 file changed, 33 insertions(+), 34 deletions(-) diff --git a/src/mesa/drivers/dri/r300/r300_tex.c b/src/mesa/drivers/dri/r300/r300_tex.c index 16321af7d46..4a989fcde9c 100644 --- a/src/mesa/drivers/dri/r300/r300_tex.c +++ b/src/mesa/drivers/dri/r300/r300_tex.c @@ -968,6 +968,7 @@ r300TexSubImage3D(GLcontext * ctx, GLenum target, GLint level, static void r300TexEnv(GLcontext * ctx, GLenum target, GLenum pname, const GLfloat * param) { + r300ContextPtr rmesa = R300_CONTEXT(ctx); if (RADEON_DEBUG & DEBUG_STATE) { fprintf(stderr, "%s( %s )\n", __FUNCTION__, _mesa_lookup_enum_by_nr(pname)); @@ -978,41 +979,39 @@ static void r300TexEnv(GLcontext * ctx, GLenum target, * between them according to _ReallyEnabled. */ switch (pname) { - case GL_TEXTURE_LOD_BIAS_EXT:{ -#if 0 /* Needs to be relocated in order to make sure we got the right tmu */ - GLfloat bias, min; - GLuint b; - - /* The R300's LOD bias is a signed 2's complement value with a - * range of -16.0 <= bias < 16.0. - * - * NOTE: Add a small bias to the bias for conform mipsel.c test. - */ - bias = *param + .01; - min = - driQueryOptionb(&rmesa->radeon.optionCache, - "no_neg_lod_bias") ? 0.0 : -16.0; - bias = CLAMP(bias, min, 16.0); - - /* 0.0 - 16.0 == 0x0 - 0x1000 */ - /* 0.0 - -16.0 == 0x1001 - 0x1fff */ - b = 0x1000 / 16.0 * bias; - b &= R300_LOD_BIAS_MASK; - - if (b != - (rmesa->hw.tex.unknown1. - cmd[R300_TEX_VALUE_0 + - unit] & R300_LOD_BIAS_MASK)) { - R300_STATECHANGE(rmesa, tex.unknown1); - rmesa->hw.tex.unknown1.cmd[R300_TEX_VALUE_0 + - unit] &= - ~R300_LOD_BIAS_MASK; - rmesa->hw.tex.unknown1.cmd[R300_TEX_VALUE_0 + - unit] |= b; - } -#endif - break; + case GL_TEXTURE_LOD_BIAS_EXT: { + fprintf(stderr, "LOD Bias: %f\n", *param); + /* Needs to be relocated in order to make sure we got the right tmu */ + GLfloat bias, min; + GLuint b; + + /* The R300's LOD bias is a signed 2's complement value with a + * range of -16.0 <= bias < 16.0. + * + * NOTE: Add a small bias to the bias for conform mipsel.c test. + */ + bias = *param + .01; + min = driQueryOptionb(&rmesa->radeon.optionCache, + "no_neg_lod_bias") ? 0.0 : -16.0; + bias = CLAMP(bias, min, 16.0); + + b = (unsigned int)fabsf(ceilf(bias*31)); + if (signbit(bias)) { + b ^= 0x3ff; /* 10 bits */ } + fprintf(stderr, "LOD Bias (hex): 0x%x\n", b); + b <<= 3; + b &= R300_LOD_BIAS_MASK; + + int unit = 1; + + if (b != (rmesa->hw.tex.filter_1.cmd[R300_TEX_CMD_0 + unit] & R300_LOD_BIAS_MASK)) { + R300_STATECHANGE(rmesa, tex.filter_1); + rmesa->hw.tex.filter_1.cmd[R300_TEX_CMD_0 + unit] &= ~R300_LOD_BIAS_MASK; + rmesa->hw.tex.filter_1.cmd[R300_TEX_CMD_0 + unit] |= b; + } + break; + } default: return; -- 2.30.2