From 737a6673cd0faa246ccd17ae773086d50778095f Mon Sep 17 00:00:00 2001 From: Luke Kenneth Casson Leighton Date: Fri, 30 Mar 2018 10:37:13 +0100 Subject: [PATCH] rename m_class spec spi numbers --- src/spec/m_class.py | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/src/spec/m_class.py b/src/spec/m_class.py index 0730742..8803e46 100644 --- a/src/spec/m_class.py +++ b/src/spec/m_class.py @@ -26,12 +26,12 @@ def pinspec(): # Bank A, 0-15 pinouts.gpio("", ('A', 0), "A", 0, 16, 0) - pinouts.spi("1", ('A', 0), "A", 3) + pinouts.spi("0", ('A', 0), "A", 3) pinouts.uartfull("1", ('A', 0), "A", 2) pinouts.i2c("1", ('A', 4), "A", 2) pinouts.emmc("", ('A', 0), "A", 1) #pinouts.uart("2", ('A', 14), "A", 1) - pinouts.spi("2", ('A', 6), "A", 2) + pinouts.spi("1", ('A', 6), "A", 2) pinouts.eint("", ('A', 10), "A", 0, 6) pinouts.eint("", ('A', 4), "A", 0, 6, mux=3) pinouts.sdmmc("0", ('A', 10), "A", 2) @@ -41,7 +41,7 @@ def pinspec(): # Bank B, 16-47 pinouts.gpio("", ('B', 0), "B", 0, 28, 0) pinouts.rgbttl("0", ('B', 0), "B", 1) - pinouts.spi("1", ('B', 12), "B", 2) + pinouts.spi("0", ('B', 12), "B", 2) pinouts.quadspi("", ('B', 4), "B", 2, limit=4) pinouts.uart("3", ('B', 16), "B", 2) pinouts.i2c("3", ('B', 18), "B", 2) @@ -58,8 +58,8 @@ def pinspec(): pinouts.gpio("", ("C", 0), "C", 0, 24, 0) pinouts.ulpi("1", ('C', 0), "C", 1) pinouts.ulpi("2", ('C', 12), "C", 1) - pinouts.spi("2", ('C', 8), "C", 2) - #pinouts.spi("2", ('C', 28), "C", 2) + pinouts.spi("1", ('C', 8), "C", 2) + #pinouts.spi("1", ('C', 28), "C", 2) pinouts.uartfull("0", ('C', 20), "C", 3) pinouts.eint("", ('C', 0), "C", 10, 8, mux=3) pinouts.jtag("2", ('C', 8), "C", 3) @@ -352,8 +352,8 @@ auto-generated by [[pinouts.py]] 'SD0': 'SD/MMC 0', 'SD1': 'SD/MMC 1', 'SD2': 'SD/MMC 2', + 'SPI0': 'SPI (Serial Peripheral Interface) 0', 'SPI1': 'SPI (Serial Peripheral Interface) 1', - 'SPI2': 'SPI (Serial Peripheral Interface) 2', 'QSPI': 'Quad SPI (Serial Peripheral Interface) 1', 'TWI1': 'I2C 1', 'TWI2': 'I2C 2', @@ -372,7 +372,7 @@ auto-generated by [[pinouts.py]] print # Scenarios below can be spec'd out as either "find first interface" - # by name/number e.g. SPI1, or as "find in bank/mux" which must be + # by name/number e.g. SPI0, or as "find in bank/mux" which must be # spec'd as "BM:Name" where B is bank (A-F), M is Mux (0-3) # EINT and PWM are grouped together, specially, but may still be spec'd # using "BM:Name". Pins are removed in-order as listed from @@ -384,7 +384,7 @@ auto-generated by [[pinouts.py]] # of spare GPIO. eoma68 = ['B1:LCD/22', 'ULPI1/8', 'ULPI2', 'MMC', 'SD0', 'UART3', - 'TWI3', 'SPI2', 'E2:SD1', ] + 'TWI3', 'SPI1', 'E2:SD1', ] eoma68_eint = ['EINT_16', 'EINT_17', 'EINT_18', 'EINT_19'] eoma68_pwm = ['D1:PWM_2'] descriptions = { @@ -394,7 +394,7 @@ auto-generated by [[pinouts.py]] 'TWI3': 'EOMA68-compliance: must be entirely free of devices.\n' 'Address 0x51 used (externally) for EOMA68 EEPROM Id', 'E2:SD1': 'EOMA68-compliance', - 'SPI2': 'EOMA68-compliance', + 'SPI1': 'EOMA68-compliance', 'UART3': 'EOMA68-compliance', 'B1:LCD/22': 'EOMA68-compliance, 18-bit RGB/TTL LCD', 'ULPI1/8': 'user-facing: internal (on Card), USB-OTG ULPI PHY', @@ -417,7 +417,7 @@ auto-generated by [[pinouts.py]] industrial = ['D1:FB/17', 'E1:FB/8', 'B1:LCD/22', 'ULPI1/8', 'ULPI2/8', 'MMC', 'B2:SD0', 'JTAG1', 'A3:UART2', 'E2:UART1', 'C3:UART0', - 'F2:TWI1', 'D2:TWI2', 'D2:TWI3', 'SPI2', 'QSPI', 'F2:SD2'] + 'F2:TWI1', 'D2:TWI2', 'D2:TWI3', 'SPI1', 'QSPI', 'F2:SD2'] industrial_pwm = ['F2:PWM_0', 'F2:PWM_1', 'D1:PWM_2'] industrial_eint = ['EINT_24', 'EINT_25', 'EINT_26', 'EINT_27', 'EINT_20', 'EINT_21', 'EINT_22', 'EINT_23'] @@ -433,16 +433,16 @@ auto-generated by [[pinouts.py]] # leaving some GPIO spare from the RGB/TTL bank (SPI CS#) # also possibility of freeing up FlexBus CS# with a little reorg. - industrial = ['D1:FB/17', 'E1:FB/8', 'B2:SPI1', 'ULPI1/8', 'ULPI2/8', + industrial = ['D1:FB/17', 'E1:FB/8', 'B2:SPI0', 'ULPI1/8', 'ULPI2/8', 'MMC', 'B2:SD0', 'JTAG1', 'A3:UART2', 'E2:UART1', 'C3:UART0', 'B2:UART4', 'B2:UART3', - 'F2:TWI1', 'D2:TWI2', 'D2:TWI3', 'SPI2', 'QSPI', 'F2:SD2'] + 'F2:TWI1', 'D2:TWI2', 'D2:TWI3', 'SPI1', 'QSPI', 'F2:SD2'] industrial_pwm = ['F2:PWM_0', 'F2:PWM_1', 'D1:PWM_2'] industrial_eint = ['EINT_24', 'EINT_25', 'EINT_26', 'EINT_27', 'EINT_20', 'EINT_21', 'EINT_22', 'EINT_23'] ind_descriptions = { - 'B2:SPI1': 'Used for 320x240 or 640x480 etc. SPI-based LCD.\n' + 'B2:SPI0': 'Used for 320x240 or 640x480 etc. SPI-based LCD.\n' 'Frees up large numbers of GPIO from RGB/TTL bank' } unused_pins = check_functions("Industrial with SPI-LCD", @@ -461,7 +461,7 @@ auto-generated by [[pinouts.py]] 'C3:UART0', # GPS 'D2:UART3', 'D2:UART4', - 'D3:TWI1', 'D2:TWI3', 'SPI2', 'QSPI'] + 'D3:TWI1', 'D2:TWI3', 'SPI1', 'QSPI'] tablet_pwm = ['F2:PWM_0', # LCD_BACKLIGHT 'F2:PWM_1', 'D1:PWM_2'] tablet_eint = ['EINT_24', # BT_HOST_WAKE @@ -495,7 +495,7 @@ auto-generated by [[pinouts.py]] 'QSPI': 'Boot Storage (connection to companion / debug / boot MCU)\n' 'Only actually needs MISO/MOSI, bootstrap loader v. small\n' 'Bootstrap loader checks eMMC, USB-OTG, SD/MMC, SPI, etc.', - 'SPI2': 'Spare? SPI, connect to higher-speed sensor?', + 'SPI1': 'Spare? SPI, connect to higher-speed sensor?', 'D2:UART3': 'Spare? UART (or 2 extra GPIO / EINT)', 'D2:UART4': 'Spare? UART (or 2 extra GPIO)', 'D3:TWI1': 'Connect to PMIC', @@ -507,7 +507,7 @@ auto-generated by [[pinouts.py]] 'Some phones may have clam-shell or lid switch.\n' 'Some Modems have spare GPIO (over AT commandset).\n' 'AXP209 PMIC has 4x GPIO, accessible over I2C.\n' - 'SPI2, UART3-4, PWM1-2 may also be spare (10 extra GPIO).\n' + 'SPI1, UART3-4, PWM1-2 may also be spare (10 extra GPIO).\n' 'If more needed, companion MCU may be used (48+ pin variant)\n' 'which also includes ADC, DAC, more PWM etc.', 'F2:PWM_0': 'LCD Backlight', @@ -595,7 +595,7 @@ auto-generated by [[pinouts.py]] #'TWI2', # I2C Audio 'C3:UART0', # HSPA UART 'E2:UART1', # BT UART - 'C2:SPI2', # HSPI SPI + 'C2:SPI1', # HSPI SPI 'E2:SD2', # WIFI 'D3:TWI1', # sensors CTP, 'D2:TWI3', 'QSPI'] @@ -633,7 +633,7 @@ auto-generated by [[pinouts.py]] 'C3:UART0': 'Connect to HSPA UART', 'E2:UART1': 'Connect to BT UART', 'E2:SD2': 'Connect to WIFI', - 'C2:SPI2': 'HSPA SPI', + 'C2:SPI1': 'HSPA SPI', 'QSPI': 'Boot Storage (connection to companion / debug / boot MCU)\n' 'Only actually needs MISO/MOSI, bootstrap loader v. small\n' 'Bootstrap loader checks eMMC, USB-OTG, SD/MMC, SPI, etc.\n' -- 2.30.2