From 7774ace7e1f4e5bf594edb5305687386f43e7847 Mon Sep 17 00:00:00 2001 From: Sebastien Bourdeauducq Date: Mon, 19 Dec 2011 22:15:10 +0100 Subject: [PATCH] README: structure + FHDL description --- README | 367 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 367 insertions(+) create mode 100644 README diff --git a/README b/README new file mode 100644 index 00000000..7974e609 --- /dev/null +++ b/README @@ -0,0 +1,367 @@ + Migen (Milkymist Generator) +a Python toolbox for building complex digital hardware +====================================================== + +Background +========== +Even though the Milkymist system-on-chip [1] is technically successful, +it suffers from several limitations stemming from its implementation in +manually written Verilog HDL: + +(1) The "event-driven" paradigm of today's dominant hardware descriptions +languages (Verilog and VHDL, collectively referred to as "V*HDL" in the +rest of this document) is often too general. Today's FPGA architectures +are optimized for the implementation of fully synchronous circuits. This +means that the bulk of the code for an efficient FPGA design falls into +three categories: + (a) Combinatorial statements + (b) Synchronous statements + (c) Initialization of registers at reset +V*HDL do not follow this organization. This means that a lot of +repetitive manual coding is needed, which brings sources of human errors, +petty issues, and confusion for beginners: + - wire vs. reg in Verilog + - forgetting to initialize a register at reset + - deciding whether a combinatorial statement must go into a + process/always block or not + - simulation mismatches with combinatorial processes/always blocks + - and more... +A little-known fact about FPGAs is that many of them have to ability to +initialize their registers from the bitstream contents. This can be done +in a portable and standard way using an "initial" block in Verilog, and +by affecting a value at the signal declaration in VHDL. This renders an +explicit reset signal unnecessary in practice in some cases, which opens +the way for further design optimization. However, this form of +initialization is entirely not synthesizable for ASIC targets, and it is +not easy to switch between the two forms of reset using V*HDL. + +(2) V*HDL support for composite types is very limited. Signals having a +record type in VHDL are unidirectional, which makes them clumsy to use +e.g. in bus interfaces. There is no record type support in Verilog, which +means that a lot of copy-and-paste has to be done when forwarding grouped +signals. + +(3) V*HDL support for procedurally generated logic is extremely limited. +The most advanced forms of procedural generation of synthesizable logic +that V*HDL offers are CPP-style directives in Verilog, combinatorial +functions, and generate statements. Nothing really fancy, and it shows. +To give a few examples: + - Building highly flexible bus interconnect is not possible. Even +arbitrating any given number of bus masters for commonplace protocols +such as Wishbone cannot be done with the tools at V*HDL puts at our +disposal. This requires manual recoding of parts of the arbiter to add or +remove a master, which is tedious and often cause frustrating errors. +Each occurence of the latter can easily cause one or two hours of lost +productivity when combined with the long compilation times of moderately +complex system-on-chip designs. + - Building a memory infrastructure (including bus interconnect, bridges +and caches) that can automatically adapt itself at compile-time to any +word size of the SDRAM is clumsy and tedious. + - Building register banks for control, status and interrupt management +of cores can also largely benefit from automation. + - Many hardware acceleration problems can fit into the dataflow +programming model. Manual dataflow implementation in V*HDL has, again, a +lot of redundancy and potential for human errors. See the Milkymist +texture mapping unit [3][4] for an example of this. The amount of detail +to deal with manually also makes the design space exploration difficult, +and therefore hinders the design of efficient architectures. + - Pre-computation of values, such as filter coefficients for DSP or +even simply trigonometric tables, must often be done using external tools +whose results are copy-and-pasted (in the best cases, automatically) into +the V*HDL source. + +Enter Migen, a Python toolbox for building complex digital hardware. We +could have designed a brand new programming language, but that would have +been reinventing the wheel instead of being able to benefit from Python's +rich features and immense library. The price to pay is a slightly +cluttered syntax at times when writing descriptions in FHDL, but we +believe this is totally acceptable, particularly when compared to VHDL +;-) + +Migen is made up of several related components, which are described +below. + +Migen FHDL +========== +The Fragmented Hardware Description Language (FHDL) is the lowest layer +of Migen. It consists of a formal system to describe signals, and +combinatorial and synchronous statements operating on them. The formal +system itself is low level and close to the synthesizable subset of +Verilog, and we then rely on Python algorithms to build complex +structures by combining FHDL elements and encapsulating them in +"fragments". +The FHDL module also contains a back-end to produce synthesizable +Verilog, and some basic analysis functions. It would be possible to +develop a VHDL back-end as well, though more difficult than for Verilog - +we are "cheating" a bit now as Verilog provides most of the FHDL +semantics. + +FHDL differs from MyHDL [2] in fundamental ways. MyHDL follows the +event-driven paradigm of traditional HDLs (see Background, #1) while FHDL +separates the code into combinatorial statements, synchronous statements, +and reset values. In MyHDL, the logic is described directly in the Python +AST. The converter to Verilog or VHDL then examines the Python AST and +recognizes a subset of Python that it translates into V*HDL statements. +This seriously impedes the capability of MyHDL to generate logic +procedurally. With FHDL, you manipulate a custom AST from Python, and you +can more easily design algorithms that operate on it. + +FHDL is made of several elements, which are briefly explained below. + +BV +-- +The bit vector (BV) object defines if a constant or signal is signed or +unsigned, and how many bits it has. This is useful e.g. to: + - determine when to perform sign extension (FHDL uses the same rules as +Verilog). + - determine the size of registers. + - determine how many bits should be used by each value in +concatenations. + +Constant +-------- +This object should be self-explanatory. All constant objects contain a BV +object and a value. If no BV object is specified, one will be made up +using the following rules: + - If the value is positive, the BV is unsigned and has the minimum +number of bits needed to represent the constant's value in the canonical +base-2 system. + - If the value is negative, the BV is signed, and has the minimum +number of bits needed to represent the constant's value in the canonical +two's complement, base-2 system. + +Signal +------ +The signal object represents a value that is expected to change in the +circuit. It does exactly what Verilog's "wire" and "reg" and VHDL's +"signal" and "variable" do. + +The main point of the signal object is that it is identified by its +Python ID (as returned by the id() function), and nothing else. It is the +responsibility of the V*HDL back-end to establish an injective mapping +between Python IDs and the V*HDL namespace. It should perform name +mangling to ensure this. The consequence of this is that signal objects +can safely become members of arbitrary Python classes, or be passed as +parameters to functions or methods that generate logic involving them. + +The properties of a signal object are: + - a bit vector description + - a name, used as a hint for the V*HDL back-end name mangler. + - a boolean "variable". If true, the signal will behave like a VHDL +variable, or a Verilog reg that uses blocking assignment. This parameter +only has an effect when the signal's value is modified in a synchronous +statement. + - the signal's reset value. It must be an integer, and defaults to 0. +When the signal's value is modified with a synchronous statement, the +reset value is the initialization value of the associated register. +When the signal is assigned to in a conditional combinatorial statement +(If or Case), the reset value is the value that the signal has when no +condition that causes the signal to be driven is verified. This enforces +the absence of latches in designs. If the signal is permanently driven +using a combinatorial statement, the reset value has no effect. + +The sole purpose of the name property is to make the generated V*HDL code +easier to understand and debug. From a purely functional point of view, +it is perfectly OK to have several signals with the same name property. +The back-end will generate a unique name for each object. If no name +property is specified, Migen will analyze the code that created the +signal object, and try to extract the variable or member name from there. +It then uses the module name that created the signal, a underscore, and +the variable name. For example, if we are in module "foo", the following +statements will create one or several signal(s) named "foo_bar": + bar = Signal() + self.bar = Signal() + self.baz.bar = Signal() + bar = [Signal() for x in range(42)] + +Operators +--------- +Operators are represented by the _Operator object, which generally should +not be used directly. Instead, most FHDL objects overload the usual +Python logic and arithmetic operators, which allows a much lighter syntax +to be used. For example, the expression: + a * b + c +is equivalent to: + _Operator('+', [_Operator('*', [a, b]), c]) + +Slices +------ +Likewise, slices are represented by the _Slice object, which often should +not be used in favor of the Python slice operation [x:y]. +Implicit indices using the forms [x], [x:] and [:y] are supported. +Beware! Slices work like Python slices, not like VHDL or Verilog slices. +The first bound is the index of the LSB and is inclusive. The second +bound is the index of MSB and is exclusive. In V*HDL, bounds are MSB:LSB +and both are inclusive. + +Concatenations +-------------- +Concatenations are done using the Cat object. To make the syntax lighter, +its constructor takes a variable number of arguments, which are the +signals to be concatenated together (you can use the Python '*' operator +to pass a list instead). +To be consistent with slices, the first signal is connected to the bits +with the lowest indices in the result. This is the opposite of the way +the '{}' construct works in Verilog. + +Replications +------------ +The Replicate object represents the equivalent of {count{expression}} in +Verilog. + +Assignments +----------- +Assignments are represented with the _Assign object. Since using it +directly would result in a cluttered syntax, the preferred technique for +assignments is to use the be() method provided by objects that can have a +value assigned to them. They are signals, and their combinations with the +slice and concatenation operators. +As an example, the statement: + a[0].be(b) +is equivalent to: + _Assign(_Slice(a, 0, 1), b) + +If statement +------------ +The If object takes a first parameter which must be an expression +(combination of the Constant, Signal, _Operator, _Slice, etc. objects) +representing the condition, then a variable number of parameters +representing the statements (_Assign, If, Case, etc. objects) to be +executed when the condition is verified. + +The If object defines a Else() method, which when called defines the +statements to be executed when the condition is not true. Those +statements are passed as parameters to the variadic method. + +For convenience, there is also a Elif() method. + +Example: +If(tx_count16 == 0, + tx_bitcount.be(tx_bitcount + 1), + If(tx_bitcount == 8, + self.tx.be(1) + ).Elif(tx_bitcount == 9, + self.tx.be(1), + tx_busy.be(0) + ).Else( + self.tx.be(tx_reg[0]), + tx_reg.be(Cat(tx_reg[1:], 0)) + ) +) + +Case statement +-------------- +The Case object constructor takes as first parameter the expression to be +tested, then a variable number of lists describing the various cases. + +Each list contains an expression (typically a constant) describing the +value to be matched, followed by the statements to be executed when there +is a match. The head of the list can be the an instance of the Default +object. + +Instances +--------- +Instance objects represent the parametrized instantiation of a V*HDL +module, and the connection of its ports to FHDL signals. They are useful +in a number of cases: + - reusing legacy or third-party V*HDL code. + - using special FPGA features (DCM, ICAP, ...). + - implementing logic that cannot be expressed with FHDL (asynchronous + circuits, ...). + - breaking down a Migen system into multiple sub-systems, possibly + using different clock domains. + +The properties of the instance object are: + - the type of the instance (i.e. name of the instantiated module). + - a list of output ports of the instantiated module. Each element of + the list is a pair containing a string, which is the name of the + module's port, and either an existing signal (on which the port will + be connected to) or a BV (which will cause the creation of a new + signal). + - a list of input ports (likewise). + - a list of (name, value) pairs for the parameters ("generics" in VHDL) + of the module. + - the name of the clock port of the module (if any). If this is + specified, the port will be connected to the system clock. + - the name of the reset port of the module (likewise). + - the name of the instance (can be mangled like signal names). + +Memories +-------- +Memories (on-chip SRAM) are not supported, but will be soon, using a +mechanism similar to instances. (TODO) + +Fragments +--------- +A "fragment" is a unit of logic, which is composed of: + - a list of combinatorial statements. + - a list of synchronous statements. + - a list of instances. + - a list of memories. + - a set of pads, which are signals intended to be connected to + off-chip devices. + +Fragments can reference arbitrary signals, including signals that are +referenced in other fragments. Fragments can be combined using the "+" +operator, which returns a new fragment containing the concatenation of +each pair of lists. + +Fragments can be passed to the back-end for conversion to Verilog. + +By convention, classes that generate logic implement a method called +"get_fragment". When called, this method builds a new fragment +implementing the desired functionality of the class, and returns it. This +convention allows fragments to be built automatically by combining the +fragments from all relevant objects in the local scope, by using the +autofragment module. + +Migen Core Logic +================ + +Migen Bus +========= + + - Wishbone [5], the general purpose bus recommended by Opencores. + - CSR-NG, a low-bandwidth, resource-sensitive bus designed for + accessing the configuration and status registers of cores from + software. + - FastMemoryLink-NG, a split-transaction bus optimized for use with a + high-performance, out-of-order SDRAM controller. (TODO) + +Migen Bank +========== + + +Migen Flow +========== + +(TODO: there is no implementation of Migen Flow in the repository yet) + + +References: +[1] http://milkymist.org +[2] http://www.myhdl.org +[3] http://milkymist.org/thesis/thesis.pdf +[4] http://www.xilinx.com/publications/archives/xcell/Xcell77.pdf p30-35 +[5] http://cdn.opencores.org/downloads/wbspec_b4.pdf + +Practical information +===================== +Code repository: +https://github.com/milkymist/migen +Experimental version of the Milkymist SoC based on Migen: +https://github.com/milkymist/milkymist-ng + +Migen is designed for Python 3.2. + +Send questions, comments and patches to devel [AT] lists.milkymist.org +We are also on IRC: #milkymist on the Freenode network. + +Migen is free software: you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation, version 3 of the License. This program is +distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; +without even the implied warranty of MERCHANTABILITY or FITNESS FOR A +PARTICULAR PURPOSE. See the GNU General Public License for more details. +Unless otherwise noted, Migen's source code is copyright (C) 2011 +Sebastien Bourdeauducq. Authors retain ownership of their contributions. -- 2.30.2