From 807f647cac50918f0ba81ed150b2bb49fbd057a0 Mon Sep 17 00:00:00 2001 From: Matthew Malcomson Date: Wed, 27 Jan 2021 17:09:46 +0000 Subject: [PATCH] GDB: aarch64: Add ability to displaced step over a BR/BLR instruction Enable displaced stepping over a BR/BLR instruction Displaced stepping over an instruction executes a instruction in a scratch area and then manually fixes up the PC address to leave execution where it would have been if the instruction were in its original location. The BR instruction does not need modification in order to run correctly at a different address, but the displaced step fixup method should not manually adjust the PC since the BR instruction sets that value already. The BLR instruction should also avoid such a fixup, but must also have the link register modified to point to just after the original code location rather than back to the scratch location. This patch adds the above functionality. We add this functionality by modifying aarch64_displaced_step_others rather than by adding a new visitor method to aarch64_insn_visitor. We choose this since it seems that visitor approach is designed specifically for PC relative instructions (which must always be modified when executed in a different location). It seems that the BR and BLR instructions are more like the RET instruction which is already handled specially in aarch64_displaced_step_others. This also means the gdbserver code to relocate an instruction when creating a fast tracepoint does not need to be modified, since nothing special is needed for the BR and BLR instructions there. Regression tests showed nothing untoward on native aarch64 (though it took a while for me to get the testcase to account for PIE). ------##### Original observed (mis)behaviour before was that displaced stepping over a BR or BLR instruction would not execute the function they called. Most easily seen by putting a breakpoint with a condition on such an instruction and a print statement in the functions they called. When run with the breakpoint enabled the function is not called and "numargs called" is not printed. When run with the breakpoint disabled the function is called and the message is printed. --- GDB Session ~ [15:57:14] % gdb ../using-blr Reading symbols from ../using-blr...done. (gdb) disassemble blr_call_value Dump of assembler code for function blr_call_value: ... 0x0000000000400560 <+28>: blr x2 ... 0x00000000004005b8 <+116>: ret End of assembler dump. (gdb) break *0x0000000000400560 Breakpoint 1 at 0x400560: file ../using-blr.c, line 22. (gdb) condition 1 10 == 0 (gdb) run Starting program: /home/matmal01/using-blr [Inferior 1 (process 33279) exited with code 012] (gdb) disable 1 (gdb) run Starting program: /home/matmal01/using-blr numargs called [Inferior 1 (process 33289) exited with code 012] (gdb) Test program: ---- using-blr ---- \#include typedef int (foo) (int, int); typedef void (bar) (int, int); struct sls_testclass { foo *x; bar *y; int left; int right; }; __attribute__ ((noinline)) int blr_call_value (struct sls_testclass x) { int retval = x.x(x.left, x.right); if (retval % 10) return 100; return 9; } __attribute__ ((noinline)) int blr_call (struct sls_testclass x) { x.y(x.left, x.right); if (x.left % 10) return 100; return 9; } int numargs (__attribute__ ((unused)) int left, __attribute__ ((unused)) int right) { printf("numargs called\n"); return 10; } void altfunc (__attribute__ ((unused)) int left, __attribute__ ((unused)) int right) { printf("altfunc called\n"); } int main(int argc, char **argv) { struct sls_testclass x = { .x = numargs, .y = altfunc, .left = 1, .right = 2 }; if (argc > 2) { blr_call (x); } else blr_call_value (x); return 10; } --- gdb/ChangeLog | 7 +++ gdb/aarch64-tdep.c | 19 ++++--- gdb/arch/aarch64-insn.h | 9 ++++ gdb/testsuite/ChangeLog | 4 ++ gdb/testsuite/gdb.arch/insn-reloc.c | 81 +++++++++++++++++++++++++++++ 5 files changed, 114 insertions(+), 6 deletions(-) diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 4b1f21cc91d..087e2041ba2 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,10 @@ +2021-01-27 Matthew Malcomson + + * aarch64-tdep.c (aarch64_displaced_step_others): Account for + BLR and BR instructions. + * arch/aarch64-insn.h (enum aarch64_opcodes): Add BR opcode. + (enum aarch64_masks): New. + 2021-01-26 Tom Tromey * windows-nat.c (DEBUG_EXEC, DEBUG_EVENTS, DEBUG_MEM) diff --git a/gdb/aarch64-tdep.c b/gdb/aarch64-tdep.c index d1e15497a46..3ac0564dd9a 100644 --- a/gdb/aarch64-tdep.c +++ b/gdb/aarch64-tdep.c @@ -3099,14 +3099,21 @@ aarch64_displaced_step_others (const uint32_t insn, struct aarch64_displaced_step_data *dsd = (struct aarch64_displaced_step_data *) data; - aarch64_emit_insn (dsd->insn_buf, insn); - dsd->insn_count = 1; - - if ((insn & 0xfffffc1f) == 0xd65f0000) + uint32_t masked_insn = (insn & CLEAR_Rn_MASK); + if (masked_insn == BLR) { - /* RET */ - dsd->dsc->pc_adjust = 0; + /* Emit a BR to the same register and then update LR to the original + address (similar to aarch64_displaced_step_b). */ + aarch64_emit_insn (dsd->insn_buf, insn & 0xffdfffff); + regcache_cooked_write_unsigned (dsd->regs, AARCH64_LR_REGNUM, + data->insn_addr + 4); } + else + aarch64_emit_insn (dsd->insn_buf, insn); + dsd->insn_count = 1; + + if (masked_insn == RET || masked_insn == BR || masked_insn == BLR) + dsd->dsc->pc_adjust = 0; else dsd->dsc->pc_adjust = 4; } diff --git a/gdb/arch/aarch64-insn.h b/gdb/arch/aarch64-insn.h index 1e8c5eac940..6f9ec8572b2 100644 --- a/gdb/arch/aarch64-insn.h +++ b/gdb/arch/aarch64-insn.h @@ -61,7 +61,9 @@ enum aarch64_opcodes CBNZ = 0x21000000 | B, TBZ = 0x36000000 | B, TBNZ = 0x37000000 | B, + /* BR 1101 0110 0001 1111 0000 00rr rrr0 0000 */ /* BLR 1101 0110 0011 1111 0000 00rr rrr0 0000 */ + BR = 0xd61f0000, BLR = 0xd63f0000, /* RET 1101 0110 0101 1111 0000 00rr rrr0 0000 */ RET = 0xd65f0000, @@ -128,6 +130,13 @@ enum aarch64_opcodes NOP = (0 << 5) | HINT, }; +/* List of useful masks. */ +enum aarch64_masks +{ + /* Used for masking out an Rn argument from an opcode. */ + CLEAR_Rn_MASK = 0xfffffc1f, +}; + /* Representation of a general purpose register of the form xN or wN. This type is used by emitting functions that take registers as operands. */ diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index ec5db0612e0..f20f041878e 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,7 @@ +2021-01-27 Matthew Malcomson + + * gdb.arch/insn-reloc.c: Add tests for BR and BLR. + 2021-01-26 Tom de Vries * gdb.threads/killed-outside.exp: Allow regular output. diff --git a/gdb/testsuite/gdb.arch/insn-reloc.c b/gdb/testsuite/gdb.arch/insn-reloc.c index bfbb3161b3a..62f13a92754 100644 --- a/gdb/testsuite/gdb.arch/insn-reloc.c +++ b/gdb/testsuite/gdb.arch/insn-reloc.c @@ -512,6 +512,84 @@ can_relocate_bl (void) : : : "x30"); /* Test that LR is updated correctly. */ } +/* Make sure we can relocate a BR instruction. + + ... Set x0 to target + set_point12: + BR x0 ; jump to target (tracepoint here). + fail() + return + target: + pass() + end + + */ + +static void +can_relocate_br (void) +{ + int ok = 0; + + asm goto (" adr x0, %l0\n" + "set_point12:\n" + " br x0\n" + : + : + : "x0" + : madejump); + + fail (); + return; +madejump: + pass (); +} + +/* Make sure we can relocate a BLR instruction. + + We use two different functions since the test runner expects one breakpoint + per function and we want to test two different things. + For BLR we want to test that the BLR actually jumps to the relevant + function, *and* that it sets the LR register correctly. + + Hence we create one testcase that jumps to `pass` using BLR, and one + testcase that jumps to `pass` if BLR has set the LR correctly. + + -- can_relocate_blr_jumps + ... Set x0 to pass + set_point13: + BLR x0 ; jump to pass (tracepoint here). + + -- can_relocate_blr_sets_lr + ... Set x0 to foo + set_point14: + BLR x0 ; jumps somewhere else (tracepoint here). + BL pass ; ensures the LR was set correctly by the BLR. + + */ + +static void +can_relocate_blr_jumps (void) +{ + int ok = 0; + + /* Test BLR indeed jumps to the target. */ + asm ("set_point13:\n" + " blr %[address]\n" + : : [address] "r" (&pass) : "x30"); +} + +static void +can_relocate_blr_sets_lr (void) +{ + int ok = 0; + + /* Test BLR sets the LR correctly. */ + asm ("set_point14:\n" + " blr %[address]\n" + " bl pass\n" + : : [address] "r" (&foo) : "x30"); +} + #endif /* Functions testing relocations need to be placed here. GDB will read @@ -536,6 +614,9 @@ static testcase_ftype testcases[] = { can_relocate_ldr, can_relocate_bcond_false, can_relocate_bl, + can_relocate_br, + can_relocate_blr_jumps, + can_relocate_blr_sets_lr, #endif }; -- 2.30.2