From 9b15e3a2b755b1847b93b57d61858c99b7fbabae Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 11 Sep 2016 16:42:05 -0300 Subject: [PATCH] wandboard: Use U-Boot 2016.07 Upgrade U-Boot version to 2016.07 and make proper use of U-Boot distro configuration features. Provide a boot.scr binary script that is one of the standard ways to pass a U-Boot script with distro features enabled. With this method the uboot-env.txt file is no longer needed, so it is removed. Signed-off-by: Fabio Estevam Signed-off-by: Thomas Petazzoni --- board/wandboard/boot.scr.txt | 7 +++++++ board/wandboard/genimage.cfg | 7 ------- board/wandboard/post-build.sh | 8 ++++++++ board/wandboard/uboot-env.txt | 28 ---------------------------- configs/wandboard_defconfig | 10 +++------- 5 files changed, 18 insertions(+), 42 deletions(-) create mode 100644 board/wandboard/boot.scr.txt create mode 100755 board/wandboard/post-build.sh delete mode 100644 board/wandboard/uboot-env.txt diff --git a/board/wandboard/boot.scr.txt b/board/wandboard/boot.scr.txt new file mode 100644 index 0000000000..7a8aa4bd54 --- /dev/null +++ b/board/wandboard/boot.scr.txt @@ -0,0 +1,7 @@ +setenv finduuid "part uuid mmc 0:1 uuid" +run finduuid +run findfdt +setenv bootargs "console=ttymxc0,115200 root=PARTUUID=${uuid} rootwait rootfstype=ext4" +load mmc 0:1 ${fdt_addr} boot/${fdtfile} +load mmc 0:1 ${loadaddr} boot/zImage +bootz ${loadaddr} - ${fdt_addr} diff --git a/board/wandboard/genimage.cfg b/board/wandboard/genimage.cfg index f5df1ff883..32c7c16c8d 100644 --- a/board/wandboard/genimage.cfg +++ b/board/wandboard/genimage.cfg @@ -23,13 +23,6 @@ image sdcard.img { offset = 70656 } - partition u-boot-env { - in-partition-table = "no" - image = "uboot-env.bin" - offset = 393216 - size = 8192 - } - partition rootfs { partition-type = 0x83 image = "rootfs.ext2" diff --git a/board/wandboard/post-build.sh b/board/wandboard/post-build.sh new file mode 100755 index 0000000000..07c480e616 --- /dev/null +++ b/board/wandboard/post-build.sh @@ -0,0 +1,8 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +$HOST_DIR/usr/bin/mkimage -A arm -O linux -T script -C none \ +-n "boot script" -d $BOARD_DIR/boot.scr.txt $BOARD_DIR/boot.scr + +install -m 0644 -D $BOARD_DIR/boot.scr $TARGET_DIR/boot/boot.scr diff --git a/board/wandboard/uboot-env.txt b/board/wandboard/uboot-env.txt deleted file mode 100644 index f8c4fc1391..0000000000 --- a/board/wandboard/uboot-env.txt +++ /dev/null @@ -1,28 +0,0 @@ -baudrate=115200 -boot_fdt=try -bootcmd=run findfdt; mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi -bootdelay=3 -bootscript=echo Running bootscript from mmc ...; source -console=ttymxc0 -ethact=FEC -ethaddr=00:1f:7b:b2:05:ee -ethprime=FEC -loadaddr=0x12000000 -fdt_addr=0x18000000 -fdt_high=0xffffffff -fdtfile=undefined -findfdt=if test $board_rev = MX6Q ; then setenv fdtfile imx6q-wandboard.dtb; fi; if test $board_rev = MX6DL ; then setenv fdtfile imx6dl-wandboard.dtb; fi; if test $fdtfile = undefined; then echo WARNING: Could not determine dtb to use; fi; -loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/${fdtfile} -loadbootscript=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script}; -loadimage=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image} -mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot}; run videoargs -videoargs=setenv nextcon 0; if hdmidet; then setenv bootargs ${bootargs} video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24; setenv fbmen fbmem=28M; setexpr nextcon ${nextcon} + 1; else echo - no HDMI monitor;fi; i2c dev 1; if i2c probe 0x10; then setenv bootargs ${bootargs} video=mxcfb${nextcon}:dev=lcd,800x480@60,if=RGB666,bpp=32; if test 0 -eq ${nextcon}; then setenv fbmem fbmem=10M; else setenv fbmem ${fbmem},10M; fi; setexpr nextcon ${nextcon} + 1; else echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';fi; setenv bootargs ${bootargs} ${fbmem} -mmcboot=echo Booting from mmc ...; run mmcargs; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; -mmcdev=0 -mmcpart=1 -mmcroot=/dev/mmcblk2p1 rootwait rw -netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp -netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} ${image}; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} /boot/${fdtfile}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; -script=boot/boot.scr -image=boot/zImage -splashpos=m,m diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig index 33b7f0dde0..4795b128e5 100644 --- a/configs/wandboard_defconfig +++ b/configs/wandboard_defconfig @@ -4,21 +4,17 @@ BR2_cortex_a9=y BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" BR2_PACKAGE_HOST_GENIMAGE=y +BR2_ROOTFS_POST_BUILD_SCRIPT="board/wandboard/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/wandboard/post-image.sh" BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y -BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y -BR2_TARGET_UBOOT_USE_DEFCONFIG=y -BR2_TARGET_UBOOT_BOARD_DEFCONFIG="wandboard" +BR2_TARGET_UBOOT_BOARDNAME="wandboard" BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2015.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.07" BR2_TARGET_UBOOT_FORMAT_IMG=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="SPL" -BR2_TARGET_UBOOT_ENVIMAGE=y -BR2_TARGET_UBOOT_ENVIMAGE_SOURCE="board/wandboard/uboot-env.txt" -BR2_TARGET_UBOOT_ENVIMAGE_SIZE="0x2000" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -- 2.30.2