From 9bbf6f91c6e85ca916ec2c266009167f20f5ecfd Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 4 Jan 2016 04:06:01 -0500 Subject: [PATCH] sim: punt x86-specific bswap logic The compiler/C library should produce reasonable code for htonl/ntohl, and at least glibc tries pretty hard to always produce good code for them. This logic only had support for 32-bit x86 systems anymore, and it's unlikely people were even opting into this, so drop it all. --- sim/aarch64/ChangeLog | 4 ++++ sim/aarch64/configure | 23 ++--------------------- sim/arm/ChangeLog | 4 ++++ sim/arm/configure | 23 ++--------------------- sim/avr/ChangeLog | 4 ++++ sim/avr/configure | 23 ++--------------------- sim/bfin/ChangeLog | 4 ++++ sim/bfin/configure | 23 ++--------------------- sim/common/ChangeLog | 9 +++++++++ sim/common/Make-common.in | 2 -- sim/common/acinclude.m4 | 15 --------------- sim/common/configure | 23 ++--------------------- sim/common/sim-config.h | 18 +----------------- sim/cr16/ChangeLog | 4 ++++ sim/cr16/configure | 23 ++--------------------- sim/cris/ChangeLog | 4 ++++ sim/cris/configure | 23 ++--------------------- sim/d10v/configure | 23 ++--------------------- sim/erc32/ChangeLog | 4 ++++ sim/erc32/configure | 23 ++--------------------- sim/frv/ChangeLog | 4 ++++ sim/frv/configure | 23 ++--------------------- sim/ft32/ChangeLog | 4 ++++ sim/ft32/configure | 23 ++--------------------- sim/h8300/ChangeLog | 4 ++++ sim/h8300/configure | 23 ++--------------------- sim/igen/ChangeLog | 4 ++++ sim/igen/configure | 5 ----- sim/iq2000/ChangeLog | 4 ++++ sim/iq2000/configure | 23 ++--------------------- sim/lm32/ChangeLog | 4 ++++ sim/lm32/configure | 23 ++--------------------- sim/m32c/ChangeLog | 4 ++++ sim/m32c/configure | 23 ++--------------------- sim/m32r/ChangeLog | 4 ++++ sim/m32r/configure | 23 ++--------------------- sim/m68hc11/ChangeLog | 4 ++++ sim/m68hc11/configure | 23 ++--------------------- sim/mcore/ChangeLog | 4 ++++ sim/mcore/configure | 23 ++--------------------- sim/microblaze/ChangeLog | 4 ++++ sim/microblaze/configure | 23 ++--------------------- sim/mips/ChangeLog | 4 ++++ sim/mips/configure | 23 ++--------------------- sim/mn10300/ChangeLog | 4 ++++ sim/mn10300/configure | 23 ++--------------------- sim/moxie/ChangeLog | 4 ++++ sim/moxie/configure | 23 ++--------------------- sim/msp430/ChangeLog | 4 ++++ sim/msp430/configure | 23 ++--------------------- sim/ppc/ChangeLog | 11 +++++++++++ sim/ppc/INSTALL | 16 ---------------- sim/ppc/Makefile.in | 3 +-- sim/ppc/configure | 25 +------------------------ sim/ppc/configure.ac | 13 ------------- sim/ppc/options.c | 1 - sim/ppc/sim-endian.h | 7 ------- sim/ppc/std-config.h | 9 --------- sim/rl78/ChangeLog | 4 ++++ sim/rl78/configure | 23 ++--------------------- sim/rx/ChangeLog | 4 ++++ sim/rx/configure | 23 ++--------------------- sim/sh/ChangeLog | 4 ++++ sim/sh/configure | 23 ++--------------------- sim/sh64/ChangeLog | 4 ++++ sim/sh64/configure | 23 ++--------------------- sim/v850/ChangeLog | 4 ++++ sim/v850/configure | 23 ++--------------------- 68 files changed, 187 insertions(+), 699 deletions(-) diff --git a/sim/aarch64/ChangeLog b/sim/aarch64/ChangeLog index 24a4eb03c33..14f4c3c472c 100644 --- a/sim/aarch64/ChangeLog +++ b/sim/aarch64/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete. diff --git a/sim/aarch64/configure b/sim/aarch64/configure index a927ffda3dc..c7688866d1d 100755 --- a/sim/aarch64/configure +++ b/sim/aarch64/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1403,7 +1401,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12531,7 +12528,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12534 "configure" +#line 12531 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12637,7 +12634,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12640 "configure" +#line 12637 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12905,22 +12902,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/arm/ChangeLog b/sim/arm/ChangeLog index 2e846efb64d..8b83ef3eb0c 100644 --- a/sim/arm/ChangeLog +++ b/sim/arm/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * wrapper.c (sim_open): Update sim_parse_args comment. diff --git a/sim/arm/configure b/sim/arm/configure index d7445d38e36..ac97233dbab 100755 --- a/sim/arm/configure +++ b/sim/arm/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1403,7 +1401,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12531,7 +12528,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12534 "configure" +#line 12531 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12637,7 +12634,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12640 "configure" +#line 12637 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12905,22 +12902,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/avr/ChangeLog b/sim/avr/ChangeLog index 27d1e271608..3398eb13dbc 100644 --- a/sim/avr/ChangeLog +++ b/sim/avr/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * interp.c (sim_open): Update sim_parse_args comment. diff --git a/sim/avr/configure b/sim/avr/configure index 9e94d999714..d172c65cf27 100755 --- a/sim/avr/configure +++ b/sim/avr/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1403,7 +1401,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12531,7 +12528,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12534 "configure" +#line 12531 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12637,7 +12634,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12640 "configure" +#line 12637 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12905,22 +12902,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/bfin/ChangeLog b/sim/bfin/ChangeLog index 67612b27885..7c16fde05f7 100644 --- a/sim/bfin/ChangeLog +++ b/sim/bfin/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * interp.c (sim_open): Update sim_parse_args comment. diff --git a/sim/bfin/configure b/sim/bfin/configure index 4617cca5a9c..ae4919845e4 100755 --- a/sim/bfin/configure +++ b/sim/bfin/configure @@ -614,7 +614,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -757,7 +756,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1415,7 +1413,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12554,7 +12551,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12557 "configure" +#line 12554 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12660,7 +12657,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12663 "configure" +#line 12660 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12928,22 +12925,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/common/ChangeLog b/sim/common/ChangeLog index 9de52381b5a..97a170a5842 100644 --- a/sim/common/ChangeLog +++ b/sim/common/ChangeLog @@ -1,3 +1,12 @@ +2016-01-04 Mike Frysinger + + * acinclude.m4 (sim-bswap): Delete. + * configure: Regenerate. + * Make-common.in (SIM_BSWAP): Delete. + (CONFIG_CFLAGS): Delete $(SIM_BSWAP). + * sim-config.h (htonl, ntohl): Delete. + (WITH_BSWAP): Delete. + 2016-01-03 Mike Frysinger * sim-options.c (sim_parse_args): Declare local save_opterr. Save diff --git a/sim/common/Make-common.in b/sim/common/Make-common.in index 36497e7babd..6fdf10f88a7 100644 --- a/sim/common/Make-common.in +++ b/sim/common/Make-common.in @@ -75,7 +75,6 @@ CFLAGS = @CFLAGS@ CPPFLAGS = @CPPFLAGS@ CXXFLAGS = @CXXFLAGS@ LDFLAGS = @LDFLAGS@ -SIM_BSWAP = @sim_bswap@ SIM_CFLAGS = @sim_cflags@ SIM_DEBUG = @sim_debug@ SIM_TRACE = @sim_trace@ @@ -234,7 +233,6 @@ CONFIG_CFLAGS = \ $(SIM_DEFAULT_MODEL) \ $(SIM_TRACE) \ $(SIM_PROFILE) \ - $(SIM_BSWAP) \ $(SIM_ASSERT) \ $(SIM_ALIGNMENT) \ $(SIM_BITSIZE) \ diff --git a/sim/common/acinclude.m4 b/sim/common/acinclude.m4 index 95293378dff..47bc2de568d 100644 --- a/sim/common/acinclude.m4 +++ b/sim/common/acinclude.m4 @@ -117,21 +117,6 @@ dnl --enable-maintainer-mode. AM_MAINTAINER_MODE -dnl This is a generic option to enable special byte swapping -dnl insns on *any* cpu. -AC_ARG_ENABLE(sim-bswap, -[AS_HELP_STRING([--enable-sim-bswap], [Use Host specific BSWAP instruction])], -[case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi],[sim_bswap=""])dnl -AC_SUBST(sim_bswap) - - AC_ARG_ENABLE(sim-cflags, [AS_HELP_STRING([--enable-sim-cflags=opts], [Extra CFLAGS for use in building simulator])], diff --git a/sim/common/configure b/sim/common/configure index 3ab1c638313..6f2e4923ecf 100755 --- a/sim/common/configure +++ b/sim/common/configure @@ -610,7 +610,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -753,7 +752,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1397,7 +1395,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -10785,7 +10782,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 10788 "configure" +#line 10785 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -10891,7 +10888,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 10894 "configure" +#line 10891 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11159,22 +11156,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/common/sim-config.h b/sim/common/sim-config.h index 4dfc7232948..4bfcdc9e248 100644 --- a/sim/common/sim-config.h +++ b/sim/common/sim-config.h @@ -40,13 +40,7 @@ # define HOST_BYTE_ORDER BFD_ENDIAN_LITTLE #endif -#if (defined (__i486__) || defined (__i586__) || defined (__i686__)) && defined(__GNUC__) && WITH_BSWAP -#undef htonl -#undef ntohl -#define htonl(IN) __extension__ ({ int _out; __asm__ ("bswap %0" : "=r" (_out) : "0" (IN)); _out; }) -#define ntohl(IN) __extension__ ({ int _out; __asm__ ("bswap %0" : "=r" (_out) : "0" (IN)); _out; }) -#endif - + /* Until devices and tree properties are sorted out, tell sim-config.c not to call the tree_find_foo fns. */ #define WITH_TREE_PROPERTIES 0 @@ -86,16 +80,6 @@ extern enum bfd_endian current_target_byte_order; -/* Intel host BSWAP support: - - Whether to use bswap on the 486 and pentiums rather than the 386 - sequence that uses xchgb/rorl/xchgb */ -#ifndef WITH_BSWAP -#define WITH_BSWAP 0 -#endif - - - /* SMP support: Sets a limit on the number of processors that can be simulated. If diff --git a/sim/cr16/ChangeLog b/sim/cr16/ChangeLog index dc56bb4569f..dedaa6d0f5d 100644 --- a/sim/cr16/ChangeLog +++ b/sim/cr16/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * interp.c (sim_open): Update sim_parse_args comment. diff --git a/sim/cr16/configure b/sim/cr16/configure index cd771d98384..ae62ac31e79 100755 --- a/sim/cr16/configure +++ b/sim/cr16/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1403,7 +1401,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12531,7 +12528,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12534 "configure" +#line 12531 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12637,7 +12634,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12640 "configure" +#line 12637 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12905,22 +12902,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/cris/ChangeLog b/sim/cris/ChangeLog index 7f8ea85cf8c..e51ce98ab0c 100644 --- a/sim/cris/ChangeLog +++ b/sim/cris/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * sim-if.c (sim_open): Update sim_parse_args comment. diff --git a/sim/cris/configure b/sim/cris/configure index 5c0265edc31..7aa81f0a924 100755 --- a/sim/cris/configure +++ b/sim/cris/configure @@ -612,7 +612,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -755,7 +754,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1410,7 +1408,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12545,7 +12542,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12548 "configure" +#line 12545 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12651,7 +12648,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12654 "configure" +#line 12651 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12919,22 +12916,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/d10v/configure b/sim/d10v/configure index d7445d38e36..ac97233dbab 100755 --- a/sim/d10v/configure +++ b/sim/d10v/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1403,7 +1401,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12531,7 +12528,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12534 "configure" +#line 12531 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12637,7 +12634,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12640 "configure" +#line 12637 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12905,22 +12902,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/erc32/ChangeLog b/sim/erc32/ChangeLog index 17267f49a4b..37620f94750 100644 --- a/sim/erc32/ChangeLog +++ b/sim/erc32/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * interf.c (sim_open): Replace while loop with a call to countargv. diff --git a/sim/erc32/configure b/sim/erc32/configure index dbd35d64fef..098c3cf872e 100755 --- a/sim/erc32/configure +++ b/sim/erc32/configure @@ -611,7 +611,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -754,7 +753,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1398,7 +1396,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12511,7 +12508,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12514 "configure" +#line 12511 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12617,7 +12614,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12620 "configure" +#line 12617 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12885,22 +12882,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/frv/ChangeLog b/sim/frv/ChangeLog index 0be8512084d..ac9b3fb8190 100644 --- a/sim/frv/ChangeLog +++ b/sim/frv/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * sim-if.c (sim_open): Update sim_parse_args comment. diff --git a/sim/frv/configure b/sim/frv/configure index aa22f526238..82bd09f8464 100755 --- a/sim/frv/configure +++ b/sim/frv/configure @@ -613,7 +613,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -756,7 +755,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1408,7 +1406,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12537,7 +12534,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12540 "configure" +#line 12537 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12643,7 +12640,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12646 "configure" +#line 12643 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12911,22 +12908,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/ft32/ChangeLog b/sim/ft32/ChangeLog index 03235f58131..a08f8043ca5 100644 --- a/sim/ft32/ChangeLog +++ b/sim/ft32/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * interp.c (sim_open): Update sim_parse_args comment. diff --git a/sim/ft32/configure b/sim/ft32/configure index ee03fe5b9ae..6ce4ef4f8e9 100755 --- a/sim/ft32/configure +++ b/sim/ft32/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1403,7 +1401,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12531,7 +12528,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12534 "configure" +#line 12531 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12637,7 +12634,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12640 "configure" +#line 12637 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12905,22 +12902,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/h8300/ChangeLog b/sim/h8300/ChangeLog index 1af2d8ab997..727c51454a1 100644 --- a/sim/h8300/ChangeLog +++ b/sim/h8300/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * compile.c (sim_open): Update sim_parse_args comment. diff --git a/sim/h8300/configure b/sim/h8300/configure index 728d17e65b8..4865f20ab0e 100755 --- a/sim/h8300/configure +++ b/sim/h8300/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1398,7 +1396,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12516,7 +12513,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12519 "configure" +#line 12516 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12622,7 +12619,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12625 "configure" +#line 12622 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12890,22 +12887,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/igen/ChangeLog b/sim/igen/ChangeLog index 6b126e5062f..15137f12964 100644 --- a/sim/igen/ChangeLog +++ b/sim/igen/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2015-06-12 Mike Frysinger * configure: Regenerate. diff --git a/sim/igen/configure b/sim/igen/configure index 9529c58f1ef..92c520013af 100755 --- a/sim/igen/configure +++ b/sim/igen/configure @@ -638,7 +638,6 @@ sim_hw_cflags sim_default_model sim_scache sim_float -sim_hostendian sim_endian sim_bitsize sim_assert @@ -3720,10 +3719,6 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - diff --git a/sim/iq2000/ChangeLog b/sim/iq2000/ChangeLog index 68bb2fd9dee..bcbe6fcd481 100644 --- a/sim/iq2000/ChangeLog +++ b/sim/iq2000/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * sim-if.c (sim_open): Update sim_parse_args comment. diff --git a/sim/iq2000/configure b/sim/iq2000/configure index 86ffedb6d89..fba8dc157fe 100755 --- a/sim/iq2000/configure +++ b/sim/iq2000/configure @@ -612,7 +612,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -755,7 +754,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1407,7 +1405,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12537,7 +12534,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12540 "configure" +#line 12537 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12643,7 +12640,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12646 "configure" +#line 12643 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12911,22 +12908,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/lm32/ChangeLog b/sim/lm32/ChangeLog index a25d28be097..8333d4535ae 100644 --- a/sim/lm32/ChangeLog +++ b/sim/lm32/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * sim-if.c (sim_open): Update sim_parse_args comment. diff --git a/sim/lm32/configure b/sim/lm32/configure index d16cf9a5d5a..c392d238f82 100755 --- a/sim/lm32/configure +++ b/sim/lm32/configure @@ -612,7 +612,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -755,7 +754,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1406,7 +1404,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12534,7 +12531,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12537 "configure" +#line 12534 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12640,7 +12637,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12643 "configure" +#line 12640 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12908,22 +12905,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/m32c/ChangeLog b/sim/m32c/ChangeLog index 1ae19aca507..1d132dcea1b 100644 --- a/sim/m32c/ChangeLog +++ b/sim/m32c/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/m32c/configure b/sim/m32c/configure index 0e43ba565cd..e20c88db65f 100755 --- a/sim/m32c/configure +++ b/sim/m32c/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1399,7 +1397,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12517,7 +12514,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12520 "configure" +#line 12517 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12623,7 +12620,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12626 "configure" +#line 12623 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12891,22 +12888,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/m32r/ChangeLog b/sim/m32r/ChangeLog index 7723cb91e3f..f30b9e566e9 100644 --- a/sim/m32r/ChangeLog +++ b/sim/m32r/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * sim-if.c (sim_open): Update sim_parse_args comment. diff --git a/sim/m32r/configure b/sim/m32r/configure index 734675a223d..b4a1bd6a671 100755 --- a/sim/m32r/configure +++ b/sim/m32r/configure @@ -614,7 +614,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -757,7 +756,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1409,7 +1407,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12539,7 +12536,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12542 "configure" +#line 12539 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12645,7 +12642,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12648 "configure" +#line 12645 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12913,22 +12910,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/m68hc11/ChangeLog b/sim/m68hc11/ChangeLog index fbf142b1a21..e7020d9612b 100644 --- a/sim/m68hc11/ChangeLog +++ b/sim/m68hc11/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * interp.c (sim_open): Update sim_parse_args comment. diff --git a/sim/m68hc11/configure b/sim/m68hc11/configure index 74309174a90..667b9015f1c 100755 --- a/sim/m68hc11/configure +++ b/sim/m68hc11/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1403,7 +1401,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12530,7 +12527,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12533 "configure" +#line 12530 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12636,7 +12633,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12639 "configure" +#line 12636 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12904,22 +12901,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/mcore/ChangeLog b/sim/mcore/ChangeLog index 05b9d459c9b..bc2cb31e4f0 100644 --- a/sim/mcore/ChangeLog +++ b/sim/mcore/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * interp.c (sim_open): Update sim_parse_args comment. diff --git a/sim/mcore/configure b/sim/mcore/configure index d7445d38e36..ac97233dbab 100755 --- a/sim/mcore/configure +++ b/sim/mcore/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1403,7 +1401,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12531,7 +12528,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12534 "configure" +#line 12531 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12637,7 +12634,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12640 "configure" +#line 12637 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12905,22 +12902,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/microblaze/ChangeLog b/sim/microblaze/ChangeLog index 783048da918..f8845b7160f 100644 --- a/sim/microblaze/ChangeLog +++ b/sim/microblaze/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * interp.c (sim_open): Update sim_parse_args comment. diff --git a/sim/microblaze/configure b/sim/microblaze/configure index d7445d38e36..ac97233dbab 100755 --- a/sim/microblaze/configure +++ b/sim/microblaze/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1403,7 +1401,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12531,7 +12528,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12534 "configure" +#line 12531 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12637,7 +12634,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12640 "configure" +#line 12637 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12905,22 +12902,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/mips/ChangeLog b/sim/mips/ChangeLog index f8ec3e7a402..aee39b31975 100644 --- a/sim/mips/ChangeLog +++ b/sim/mips/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * interp.c (sim_open): Update sim_parse_args comment. diff --git a/sim/mips/configure b/sim/mips/configure index 879b1e5969a..51fd7f6b6c6 100755 --- a/sim/mips/configure +++ b/sim/mips/configure @@ -622,7 +622,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -765,7 +764,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1426,7 +1424,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12563,7 +12560,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12566 "configure" +#line 12563 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12669,7 +12666,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12672 "configure" +#line 12669 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12937,22 +12934,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/mn10300/ChangeLog b/sim/mn10300/ChangeLog index 4311aa501e5..65ec3aeab07 100644 --- a/sim/mn10300/ChangeLog +++ b/sim/mn10300/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * interp.c (sim_open): Update sim_parse_args comment. diff --git a/sim/mn10300/configure b/sim/mn10300/configure index 1f1aab178c8..d34446a278b 100755 --- a/sim/mn10300/configure +++ b/sim/mn10300/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1405,7 +1403,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12536,7 +12533,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12539 "configure" +#line 12536 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12642,7 +12639,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12645 "configure" +#line 12642 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12910,22 +12907,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/moxie/ChangeLog b/sim/moxie/ChangeLog index 18ad7b20a98..e556c902c90 100644 --- a/sim/moxie/ChangeLog +++ b/sim/moxie/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * interp.c (sim_open): Update sim_parse_args comment. diff --git a/sim/moxie/configure b/sim/moxie/configure index 112be453774..1ee18878c34 100755 --- a/sim/moxie/configure +++ b/sim/moxie/configure @@ -610,7 +610,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -753,7 +752,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1404,7 +1402,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12532,7 +12529,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12535 "configure" +#line 12532 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12638,7 +12635,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12641 "configure" +#line 12638 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12906,22 +12903,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/msp430/ChangeLog b/sim/msp430/ChangeLog index 73d89c34783..fea5ce87a85 100644 --- a/sim/msp430/ChangeLog +++ b/sim/msp430/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/msp430/configure b/sim/msp430/configure index e083fed402b..8e5d572738f 100755 --- a/sim/msp430/configure +++ b/sim/msp430/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1402,7 +1400,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12527,7 +12524,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12530 "configure" +#line 12527 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12633,7 +12630,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12636 "configure" +#line 12633 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12901,22 +12898,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/ppc/ChangeLog b/sim/ppc/ChangeLog index 82fd50b5158..b5d1dd8ae5f 100644 --- a/sim/ppc/ChangeLog +++ b/sim/ppc/ChangeLog @@ -1,3 +1,14 @@ +2016-01-04 Mike Frysinger + + * configure.ac (sim-bswap): Delete. + * configure: Regenerate. + * INSTALL: Delete --enable-sim-bswap docs. + * Makefile.in (BSWAP_CFLAGS): Delete. + (CONFIG_CFLAGS): Delete $(BSWAP_CFLAGS). + * options.c (print_options): Delete WITH_BSWAP. + * sim-endian.h (htonl, ntohl): Delete. + * std-config.h (WITH_BSWAP): Delete. + 2016-01-02 Mike Frysinger * main.c (main): Pass SIM_OPEN_STANDALONE to psim_options and diff --git a/sim/ppc/INSTALL b/sim/ppc/INSTALL index da288f1629d..8240ac79c5b 100644 --- a/sim/ppc/INSTALL +++ b/sim/ppc/INSTALL @@ -480,22 +480,6 @@ with: ---enable-sim-bswap - - -(x86 specific) Use the i486/P5/P6 byte swap instruction. - -PSIM contains generic byte swapping code. For the x86 (P[4-6]) PSIM -can be built so that it uses the bswap instruction instead of relying -on the compiler to generate byte swap code. - -Ex: default - -By default, when compiling with GCC-2 on an i486/P5/P6 the bswap -instruction is used. - - - --enable-sim-endian=endian diff --git a/sim/ppc/Makefile.in b/sim/ppc/Makefile.in index 5f689091271..6efa73f6d0d 100644 --- a/sim/ppc/Makefile.in +++ b/sim/ppc/Makefile.in @@ -72,7 +72,6 @@ RANLIB = @RANLIB@ SIM_CFLAGS = @sim_cflags@ INLINE_CFLAGS = @sim_inline@ -BSWAP_CFLAGS = @sim_bswap@ ENDIAN_CFLAGS = @sim_endian@ REGPARM_CFLAGS = @sim_regparm@ STDCALL_CFLAGS = @sim_stdcall@ @@ -94,7 +93,7 @@ STDIO_CFLAGS = @sim_stdio@ TERMIO_CFLAGS = @sim_termio@ WARNING_CFLAGS = @sim_warnings@ DEVZERO_CFLAGS = @sim_devzero@ -CONFIG_CFLAGS = $(BSWAP_CFLAGS) \ +CONFIG_CFLAGS = \ $(ENDIAN_CFLAGS) \ $(REGPARM_CFLAGS) \ $(STDCALL_CFLAGS) \ diff --git a/sim/ppc/configure b/sim/ppc/configure index 1298d38e24f..63f13952576 100755 --- a/sim/ppc/configure +++ b/sim/ppc/configure @@ -605,7 +605,7 @@ sim_timebase sim_env sim_hostbitsize sim_igen_smp -sim_bswap +sim_hostendian sim_pk_obj sim_pk_src sim_hw_obj @@ -684,7 +684,6 @@ sim_hw_cflags sim_default_model sim_scache sim_float -sim_hostendian sim_endian sim_bitsize sim_assert @@ -734,7 +733,6 @@ enable_option_checking enable_sim_alignment enable_sim_assert enable_sim_bitsize -enable_sim_bswap enable_sim_cflags enable_sim_config enable_sim_decode_mechanism @@ -1401,7 +1399,6 @@ Optional Features: --enable-sim-alignment=align Specify strict or nonstrict alignment. --enable-sim-assert Specify whether to perform random assertions. --enable-sim-bitsize=n Specify target bitsize (32 or 64). - --enable-sim-bswap Use the BSWAP instruction on Intel 486s and Pentiums. --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-config=file Override default config file --enable-sim-decode-mechanism=which Specify the instruction decode mechanism. @@ -4063,10 +4060,6 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - @@ -5238,21 +5231,6 @@ else fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in @@ -7941,7 +7919,6 @@ fi - ac_config_files="$ac_config_files Makefile" diff --git a/sim/ppc/configure.ac b/sim/ppc/configure.ac index f1a7e06c9b5..dff48d2a7f6 100644 --- a/sim/ppc/configure.ac +++ b/sim/ppc/configure.ac @@ -56,18 +56,6 @@ if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then fi],[sim_bitsize=""])dnl -AC_ARG_ENABLE(sim-bswap, -[ --enable-sim-bswap Use the BSWAP instruction on Intel 486s and Pentiums.], -[case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi],[sim_bswap=""])dnl - - AC_ARG_ENABLE(sim-cflags, [ --enable-sim-cflags=opts Extra CFLAGS for use in building simulator], [case "${enableval}" in @@ -902,7 +890,6 @@ AC_SUBST(sim_hw_obj) AC_SUBST(sim_pk_src) AC_SUBST(sim_pk_obj) AC_SUBST(sim_inline) -AC_SUBST(sim_bswap) AC_SUBST(sim_endian) AC_SUBST(sim_regparm) AC_SUBST(sim_stdcall) diff --git a/sim/ppc/options.c b/sim/ppc/options.c index f855c7ba4c6..b8f9f9c12af 100644 --- a/sim/ppc/options.c +++ b/sim/ppc/options.c @@ -120,7 +120,6 @@ print_options (void) printf_filtered ("WITH_HOST_BYTE_ORDER = %s\n", options_byte_order (WITH_HOST_BYTE_ORDER)); printf_filtered ("WITH_TARGET_BYTE_ORDER = %s\n", options_byte_order (WITH_TARGET_BYTE_ORDER)); printf_filtered ("WITH_XOR_ENDIAN = %d\n", WITH_XOR_ENDIAN); - printf_filtered ("WITH_BSWAP = %d\n", WITH_BSWAP); printf_filtered ("WITH_SMP = %d\n", WITH_SMP); printf_filtered ("WITH_HOST_WORD_BITSIZE = %d\n", WITH_HOST_WORD_BITSIZE); printf_filtered ("WITH_TARGET_WORD_BITSIZE = %d\n", WITH_TARGET_WORD_BITSIZE); diff --git a/sim/ppc/sim-endian.h b/sim/ppc/sim-endian.h index c6df0f258d1..9a873333a11 100644 --- a/sim/ppc/sim-endian.h +++ b/sim/ppc/sim-endian.h @@ -154,13 +154,6 @@ INLINE_PSIM_ENDIAN(unsigned_8) endian_le2h_8(unsigned_8 x); # endif #endif -#if (defined (__i486__) || defined (__i586__) || defined (__i686__)) && defined(__GNUC__) && WITH_BSWAP -#undef htonl -#undef ntohl -#define htonl(IN) __extension__ ({ int _out; __asm__ ("bswap %0" : "=r" (_out) : "0" (IN)); _out; }) -#define ntohl(IN) __extension__ ({ int _out; __asm__ ("bswap %0" : "=r" (_out) : "0" (IN)); _out; }) -#endif - /* Power or PowerPC running AIX */ #if defined(_POWER) && defined(_AIX) # if (WITH_HOST_BYTE_ORDER == 0) diff --git a/sim/ppc/std-config.h b/sim/ppc/std-config.h index 3b6b94363de..04ba654fc55 100644 --- a/sim/ppc/std-config.h +++ b/sim/ppc/std-config.h @@ -59,15 +59,6 @@ extern int current_target_byte_order; #endif -/* Intel host BSWAP support: - - Whether to use bswap on the 486 and pentiums rather than the 386 - sequence that uses xchgb/rorl/xchgb */ -#ifndef WITH_BSWAP -#define WITH_BSWAP 0 -#endif - - /* SMP support: Sets a limit on the number of processors that can be simulated. If diff --git a/sim/rl78/ChangeLog b/sim/rl78/ChangeLog index 2c3f1278a71..3f9bf4ecfcd 100644 --- a/sim/rl78/ChangeLog +++ b/sim/rl78/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/rl78/configure b/sim/rl78/configure index e915e85b9b7..d85339a1fec 100755 --- a/sim/rl78/configure +++ b/sim/rl78/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1396,7 +1394,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12509,7 +12506,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12512 "configure" +#line 12509 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12615,7 +12612,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12618 "configure" +#line 12615 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12883,22 +12880,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/rx/ChangeLog b/sim/rx/ChangeLog index 2ecc4bc9327..5460ccb653d 100644 --- a/sim/rx/ChangeLog +++ b/sim/rx/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/rx/configure b/sim/rx/configure index 21e4f949b10..7c4a02b92f1 100755 --- a/sim/rx/configure +++ b/sim/rx/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1398,7 +1396,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12514,7 +12511,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12517 "configure" +#line 12514 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12620,7 +12617,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12623 "configure" +#line 12620 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12888,22 +12885,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/sh/ChangeLog b/sim/sh/ChangeLog index b9641d43125..b24b90664ff 100644 --- a/sim/sh/ChangeLog +++ b/sim/sh/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * interp.c (sim_open): Update sim_parse_args comment. diff --git a/sim/sh/configure b/sim/sh/configure index d7445d38e36..ac97233dbab 100755 --- a/sim/sh/configure +++ b/sim/sh/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1403,7 +1401,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12531,7 +12528,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12534 "configure" +#line 12531 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12637,7 +12634,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12640 "configure" +#line 12637 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12905,22 +12902,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/sh64/ChangeLog b/sim/sh64/ChangeLog index 0ca9814a220..07c76f85127 100644 --- a/sim/sh64/ChangeLog +++ b/sim/sh64/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * sim-if.c (sim_open): Update sim_parse_args comment. diff --git a/sim/sh64/configure b/sim/sh64/configure index b65e5480801..6516f316992 100755 --- a/sim/sh64/configure +++ b/sim/sh64/configure @@ -612,7 +612,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -755,7 +754,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1407,7 +1405,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12537,7 +12534,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12540 "configure" +#line 12537 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12643,7 +12640,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12646 "configure" +#line 12643 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12911,22 +12908,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in diff --git a/sim/v850/ChangeLog b/sim/v850/ChangeLog index 96ae98a9222..37b29e82d01 100644 --- a/sim/v850/ChangeLog +++ b/sim/v850/ChangeLog @@ -1,3 +1,7 @@ +2016-01-04 Mike Frysinger + + * configure: Regenerate. + 2016-01-03 Mike Frysinger * interp.c (sim_open): Update sim_parse_args comment. diff --git a/sim/v850/configure b/sim/v850/configure index b7b9578a2ae..94600a68a5f 100755 --- a/sim/v850/configure +++ b/sim/v850/configure @@ -609,7 +609,6 @@ sim_trace sim_stdio sim_debug sim_cflags -sim_bswap MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_bswap enable_sim_cflags enable_sim_debug enable_sim_stdio @@ -1403,7 +1401,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-bswap Use Host specific BSWAP instruction --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim @@ -12530,7 +12527,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12533 "configure" +#line 12530 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12636,7 +12633,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12639 "configure" +#line 12636 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12904,22 +12901,6 @@ fi -# Check whether --enable-sim-bswap was given. -if test "${enable_sim_bswap+set}" = set; then : - enableval=$enable_sim_bswap; case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi -else - sim_bswap="" -fi - - - # Check whether --enable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then : enableval=$enable_sim_cflags; case "${enableval}" in -- 2.30.2