From a2311334f707ca8a11737e5c31d016a2944c85d3 Mon Sep 17 00:00:00 2001 From: Eli Zaretskii Date: Fri, 1 May 2009 09:11:25 +0000 Subject: [PATCH] * gdb.texinfo (Process Record and Replay): Improve and clarify. Add index entries. --- gdb/doc/ChangeLog | 8 ++- gdb/doc/gdb.texinfo | 142 +++++++++++++++++++++++++------------------- 2 files changed, 89 insertions(+), 61 deletions(-) diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog index f8fe13e46bf..2603f22be3e 100644 --- a/gdb/doc/ChangeLog +++ b/gdb/doc/ChangeLog @@ -1,7 +1,13 @@ +2009-05-01 Eli Zaretskii + + * gdb.texinfo (Process Record and Replay): Improve and clarify. + Add index entries. + 2009-04-30 Hui Zhu Michael Snyder - * gdb.texinfo: Add documentation for process record and replay. + * gdb.texinfo: (Process Record and Replay): Add documentation for + process record and replay. 2009-04-29 Jan Kratochvil diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index ded394ea76e..6eca830cc2a 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -134,7 +134,7 @@ software in general. We will miss him. * Running:: Running programs under @value{GDBN} * Stopping:: Stopping and continuing * Reverse Execution:: Running programs backward -* Process record and replay:: Recording inferior's execution and replaying it +* Process Record and Replay:: Recording inferior's execution and replaying it * Stack:: Examining the stack * Source:: Examining source files * Data:: Examining data @@ -5003,97 +5003,119 @@ This is the default. @end table -@node Process record and replay -@chapter Recording inferior's execution and replaying it +@node Process Record and Replay +@chapter Recording Inferior's Execution and Replaying It @cindex process record and replay @cindex recording inferior's execution and replaying it -In a architecture environment that supports process record and replay, -process record and replay target can record a log of the process execution, -and replay it with both forward and reverse execute commands. +In an architecture environment that supports process recording and +replay, a special @dfn{process record and replay} target can record a +log of the process execution, and replay it later with both forward +and reverse execution commands. -When this target is in use, if the execution log includes the record for -the next instruction, @value{GDBN} will debug in replay mode. So inferior -will not really execute and all the execution events are taken from the -execution log. Just the values of registers (include pc register) and -memory of the inferior will be changed. +@cindex replay mode +When this target is in use, if the execution log includes the record +for the next instruction, @value{GDBN} will debug in @dfn{replay +mode}. In the replay mode, the inferior does not really execute code +instructions. Instead, all the events that normally happen during +code execution are taken from the execution log. While code is not +really executed in replay mode, the values of registers (including the +program counter register) and the memory of the inferior are still +changed as they normally would. -Otherwise, @value{GDBN} will debug in record mode. So inferior will -execute normally and @value{GDBN} will record the execution log. +@cindex record mode +If the record for the next instruction is not in the execution log, +@value{GDBN} will debug in @dfn{record mode}. In this mode, the +inferior executes normally, and @value{GDBN} records the execution log +for future replay. -If you are debugging in a architecture environment that supports -process record and replay, @value{GDBN} provides the following commands. +For architecture environments that support process record and replay, +@value{GDBN} provides the following commands: @table @code @kindex target record @kindex record @kindex rec @item target record -This a standard command to start process record and replay target. -Process record and replay target can only debug a process that already -running. Therefore you need to first start the process @code{run}, -and then start the recording @code{target record}. - -Both @code{record} and @code{rec} are the aliases of @code{target record}. - -Displaced stepping function will disable when process record and replay -target is opened. Because process record and replay target doesn't -support displaced stepping function. - -If inferior in non-stop mode (non-stop) or in asynchronous mode -(target-async), process record and replay target can't be open because -it doesn't support these two modes. +This command starts the process record and replay target. The process +record and replay target can only debug a process that is already +running. Therefore, you need first to start the process with the +@kbd{run} or @kbd{start} commands, and then start the recording with +the @kbd{target record} command. + +Both @code{record} and @code{rec} are aliases of @code{target record}. + +@cindex displaced stepping, and process record and replay +Displaced stepping (@pxref{Maintenance Commands,, displaced stepping}) +will be automatically disabled when process record and replay target +is started. That's because the process record and replay target +doesn't support displaced stepping. + +@cindex non-stop mode, and process record and replay +@cindex asynchronous execution, and process record and replay +If the inferior is in the non-stop mode (@pxref{Non-Stop Mode}) or in +the asynchronous execution mode (@pxref{Background Execution}), the +process record and replay target cannot be started because it doesn't +support these two modes. @kindex record stop @kindex rec s @item record stop -Stop process record and replay target at once. When Process record and -replay target stops, all the execution log will be deleted and the inferior -will either be terminated, or remain in its final state. +Stop the process record and replay target. When process record and +replay target stops, the entire execution log will be deleted and the +inferior will either be terminated, or will remain in its final state. -When you stop the process record and replay target in record mode (at the -end of the execution log), the inferior will be stopped at the next -instruction that would have been recorded. In other words, if you record -for a while and then stop recording, the inferior process will be left in -the same state as if recording never happened. +When you stop the process record and replay target in record mode (at +the end of the execution log), the inferior will be stopped at the +next instruction that would have been recorded. In other words, if +you record for a while and then stop recording, the inferior process +will be left in the same state as if the recording never happened. -On the other hand, if the process record and replay target is stopped while -in replay mode (that is, not at the end of the execution log but at some -earlier point), the inferior process will become ``live'' at that earlier state, -and it will then be possible to continue debugging the process ``live'' from -that state. +On the other hand, if the process record and replay target is stopped +while in replay mode (that is, not at the end of the execution log, +but at some earlier point), the inferior process will become ``live'' +at that earlier state, and it will then be possible to continue the +usual ``live'' debugging of the process from that state. -When the inferior process exits, or @value{GDBN} detaches from it, process -record and replay target will automatically stop itself. +When the inferior process exits, or @value{GDBN} detaches from it, +process record and replay target will automatically stop itself. @kindex set record insn-number-max @item set record insn-number-max @var{limit} Set the limit of instructions to be recorded. Default value is 200000. -In this case, if record instructions number is bigger than @var{limit}, -@value{GDBN} will auto delete the earliest recorded instruction execute -log. +If @var{limit} is a positive number, then @value{GDBN} will start +deleting instructions from the log once the number of the record +instructions becomes greater than @var{limit}. For every new recorded +instruction, @value{GDBN} will delete the earliest recorded +instruction to keep the number of recorded instructions at the limit. +(Since deleting recorded instructions loses information, @value{GDBN} +lets you control what happens when the limit is reached, by means of +the @code{stop-at-limit} option, described below.) -If set to 0, @value{GDBN} will not delete the earliest recorded instruction -execute log. Record instructions number limit function will disable. +If @var{limit} is zero, @value{GDBN} will never delete recorded +instructions from the execution log. The number of recorded +instructions is unlimited in this case. @kindex show record insn-number-max @item show record insn-number-max -Show the value of recorded instructions limit. +Show the limit of instructions to be recorded. @kindex set record stop-at-limit -@item set record stop-at-limit on -Set the behavior when record instructions limit is reached. -This is the default mode. Meaning that @value{GDBN} will stop ask user -want close @code{record stop-at-limit} or stop inferior. +@item set record stop-at-limit +Control the behavior when the number of recorded instructions reaches +the limit. If ON (the default), @value{GDBN} will stop when the limit +is reached for the first time and ask you whether you want to stop the +inferior or continue running it and recording the execution log. If +you decide to continue recording, each new recorded instruction will +cause the oldest one to be deleted. -@item set record stop-at-limit off -This mean that @value{GDBN} will auto delete the oldest record to make -room for each new one. +If this option is OFF, @value{GDBN} will automatically delete the +oldest record to make room for each new one, without asking. @kindex show record stop-at-limit @item show record stop-at-limit -Show the value of record stop-at-limit. +Show the current setting of @code{stop-at-limit}. @kindex info record insn-number @item info record insn-number @@ -5102,9 +5124,9 @@ Show the current number of recorded instructions. @kindex record delete @kindex rec del @item record delete -When record target running in replay mode (``in the past''), delete the +When record target runs in replay mode (``in the past''), delete the subsequent execution log and begin to record a new execution log starting -from the current address. It means you will abandon the previously +from the current address. This means you will abandon the previously recorded ``future'' and begin recording a new ``future''. @end table -- 2.30.2