From a23351e7be18650b54fe33ac1fef014a364a938a Mon Sep 17 00:00:00 2001 From: Nicolas Dechesne Date: Sun, 18 Mar 2012 23:04:52 +0100 Subject: [PATCH] configs: add support for PandaBoard and PandaBoard ES This is a default configuration for Panda and PandaES, tested on both platforms. DEVTMPFS is enabled, to use static dev configuration one would need to update the generic dev table for ttyO driver. Panda is well supported in mainline kernel with omap2plus_defconfig, so this should be safe. U-boot SPL support is enabled by default as x-loader is now deprecated. With OMAP platforms u-boot,img format is prefered now, so it's enabled by default as well. Also, on PandaBoard, the name of SPL target file is MLO. Signed-off-by: Nicolas Dechesne Acked-by: Gustavo Zacarias Signed-off-by: Peter Korsgaard --- configs/pandaboard_defconfig | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 configs/pandaboard_defconfig diff --git a/configs/pandaboard_defconfig b/configs/pandaboard_defconfig new file mode 100644 index 0000000000..9496b7f8ec --- /dev/null +++ b/configs/pandaboard_defconfig @@ -0,0 +1,26 @@ +# Architecture +BR2_arm=y +BR2_cortex_a9=y + +# system +BR2_TARGET_GENERIC_GETTY=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyO2" +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y + +# filesystem +BR2_TARGET_ROOTFS_EXT2=y +# BR2_TARGET_ROOTFS_TAR is not set + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_DEFCONFIG="omap2plus" + +# GCC +BR2_GCC_VERSION_4_6_X=y + +# Bootloaders +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_FORMAT_IMG=y +BR2_TARGET_UBOOT_BOARDNAME="omap4_panda" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="MLO" -- 2.30.2