From a27ed0ec27de011ff2bf780fa7ac0a2ca9bd62a6 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 15 Oct 2019 18:16:07 +1100 Subject: [PATCH] wishbone_debug_master: Improve timing The current code has the possibility that we could set reg_addr or reg_ctrl and then increment reg_addr in the same cycle, resulting in some long timing paths. Rearrange the code to make it clear that we are not trying to add an auto-increment to data from outside the module; in any given cycle we either set one of reg_addr and reg_ctrl, or we possibly increment reg_addr. Signed-off-by: Paul Mackerras --- wishbone_debug_master.vhdl | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/wishbone_debug_master.vhdl b/wishbone_debug_master.vhdl index 51441d5..b8d936b 100644 --- a/wishbone_debug_master.vhdl +++ b/wishbone_debug_master.vhdl @@ -90,9 +90,8 @@ begin elsif dmi_addr = DBG_WB_CTRL then reg_ctrl <= dmi_din(10 downto 0); end if; - end if; - -- Address register auto-increment - if state = WB_CYCLE and (wb_in.ack and reg_ctrl(8))= '1' then + elsif state = WB_CYCLE and (wb_in.ack and reg_ctrl(8))= '1' then + -- Address register auto-increment reg_addr <= std_ulogic_vector(unsigned(reg_addr) + decode_autoinc(reg_ctrl(10 downto 9))); end if; -- 2.30.2