From a418b6c5aee683a8e574be787b8d2fe2c1bed0e9 Mon Sep 17 00:00:00 2001 From: Ian Lance Taylor Date: Fri, 19 Jul 1996 20:01:07 +0000 Subject: [PATCH] Simplify movqi, add more !TARGET_5200 cases From-SVN: r12533 --- gcc/config/m68k/m68k.md | 144 ++++++++++------------------------------ 1 file changed, 36 insertions(+), 108 deletions(-) diff --git a/gcc/config/m68k/m68k.md b/gcc/config/m68k/m68k.md index c847501a334..da9ff37ce24 100644 --- a/gcc/config/m68k/m68k.md +++ b/gcc/config/m68k/m68k.md @@ -946,8 +946,8 @@ }") (define_insn "movqi" - [(set (match_operand:QI 0 "general_operand" "=d,*a,m,m,?*a") - (match_operand:QI 1 "general_operand" "dmi*a,di*a,dmi,?*a,m"))] + [(set (match_operand:QI 0 "general_operand" "=d,*a,m") + (match_operand:QI 1 "general_operand" "dmi*a,di*a,dmi"))] "" "* { @@ -970,106 +970,6 @@ return \"\"; } - /* Moving a byte into an address register is not possible. */ - /* Use d0 as an intermediate, but don't clobber its contents. */ - if (ADDRESS_REG_P (operands[0]) && GET_CODE (operands[1]) == MEM) - { - /* ??? For 2.5, don't allow this choice and use secondary reloads - instead. - - See if the address register is used in the address. If it - is, we have to generate a more complex sequence than those below. */ - CC_STATUS_INIT; - if (refers_to_regno_p (REGNO (operands[0]), REGNO (operands[0]) + 1, - operands[1], NULL_RTX)) - { - /* See if the stack pointer is used in the address. If it isn't, - we can push d0 or d1 (the insn can't use both of them) on - the stack, perform our move into d0/d1, copy the byte from d0/1, - and pop d0/1. */ - if (! reg_mentioned_p (stack_pointer_rtx, operands[1])) - { - if (! refers_to_regno_p (0, 1, operands[1], NULL_RTX)) - return \"move%.l %/d0,%-\;move%.b %1,%/d0\;move%.l %/d0,%0\;move%.l %+,%/d0\"; - else - return \"move%.l %/d1,%-\;move%.b %1,%/d1\;move%.l %/d1,%0\;move%.l %+,%/d1\"; - } - else - { - /* Otherwise, we know that d0 cannot be used in the address - (since sp and one address register is). Assume that sp is - being used as a base register and replace the address - register that is our operand[0] with d0. */ - rtx reg_map[FIRST_PSEUDO_REGISTER]; - int i; - - for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) - reg_map[i] = 0; - - reg_map[REGNO (operands[0])] = gen_rtx (REG, Pmode, 0); - operands[1] = copy_rtx (operands[1]); - replace_regs (operands[1], reg_map, FIRST_PSEUDO_REGISTER, 0); - return \"exg %/d0,%0\;move%.b %1,%/d0\;exg %/d0,%0\"; - } - } - - /* If the address of operand 1 uses d0, choose d1 as intermediate. */ - if (refers_to_regno_p (0, 1, operands[1], NULL_RTX)) - return \"exg %/d1,%0\;move%.b %1,%/d1\;exg %/d1,%0\"; - /* Otherwise d0 is usable. - (An effective address on the 68k can't use two d-regs.) */ - else - return \"exg %/d0,%0\;move%.b %1,%/d0\;exg %/d0,%0\"; - } - - /* Likewise for moving from an address reg. */ - if (ADDRESS_REG_P (operands[1]) && GET_CODE (operands[0]) == MEM) - { - /* ??? For 2.5, don't allow this choice and use secondary reloads - instead. - - See if the address register is used in the address. If it - is, we have to generate a more complex sequence than those below. */ - CC_STATUS_INIT; - if (refers_to_regno_p (REGNO (operands[1]), REGNO (operands[1]) + 1, - operands[0], NULL_RTX)) - { - /* See if the stack pointer is used in the address. If it isn't, - we can push d0 or d1 (the insn can't use both of them) on - the stack, copy the byte to d0/1, perform our move from d0/d1, - and pop d0/1. */ - if (! reg_mentioned_p (stack_pointer_rtx, operands[0])) - { - if (! refers_to_regno_p (0, 1, operands[0], NULL_RTX)) - return \"move%.l %/d0,%-\;move%.l %1,%/d0\;move%.b %/d0,%0\;move%.l %+,%/d0\"; - else - return \"move%.l %/d1,%-\;move%.l %1,%/d1\;move%.b %/d1,%0\;move%.l %+,%/d1\"; - } - else - { - /* Otherwise, we know that d0 cannot be used in the address - (since sp and one address register is). Assume that sp is - being used as a base register and replace the address - register that is our operand[1] with d0. */ - rtx reg_map[FIRST_PSEUDO_REGISTER]; - int i; - - for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) - reg_map[i] = 0; - - reg_map[REGNO (operands[1])] = gen_rtx (REG, Pmode, 0); - operands[0] = copy_rtx (operands[0]); - replace_regs (operands[0], reg_map, FIRST_PSEUDO_REGISTER, 0); - return \"exg %/d0,%1\;move%.b %/d0,%0\;exg %/d0,%1\"; - } - } - - if (refers_to_regno_p (0, 1, operands[0], NULL_RTX)) - return \"exg %/d1,%1\;move%.b %/d1,%0\;exg %/d1,%1\"; - else - return \"exg %/d0,%1\;move%.b %/d0,%0\;exg %/d0,%1\"; - } - /* clr and st insns on 68000 read before writing. This isn't so on the 68010, but we have no TARGET_68010. */ if (!ADDRESS_REG_P (operands[0]) @@ -2051,7 +1951,7 @@ (const_int 32)) (match_operand:DI 2 "general_operand" "0,0,0,0"))) (clobber (match_scratch:SI 3 "=&d,X,a,?d"))] - "" + "!TARGET_5200" "* { CC_STATUS_INIT; @@ -2660,7 +2560,7 @@ (ashift:DI (sign_extend:DI (match_operand:HI 2 "general_operand" "rm,rm,rm,rm")) (const_int 32)))) (clobber (match_scratch:SI 3 "=&d,X,a,?d"))] - "" + "!TARGET_5200" "* { CC_STATUS_INIT; @@ -3784,10 +3684,23 @@ ;; negation instructions -(define_insn "negdi2" +(define_expand "negdi2" + [(set (match_operand:DI 0 "general_operand" "") + (neg:DI (match_operand:DI 1 "general_operand" "")))] + "" + " +{ + if (TARGET_5200) + emit_insn (gen_negdi2_5200 (operands[0], operands[1])); + else + emit_insn (gen_negdi2_internal (operands[0], operands[1])); + DONE; +}") + +(define_insn "negdi2_internal" [(set (match_operand:DI 0 "general_operand" "=<,do,!*a") (neg:DI (match_operand:DI 1 "general_operand" "0,0,0")))] - "" + "!TARGET_5200" "* { if (which_alternative == 0) @@ -3802,6 +3715,21 @@ return \"neg%.l %1\;negx%.l %0\"; } ") +(define_insn "negdi2_5200" + [(set (match_operand:DI 0 "general_operand" "=<,do") + (neg:DI (match_operand:DI 1 "general_operand" "0,0")))] + "TARGET_5200" + "* +{ + if (which_alternative == 0) + return \"neg%.l %0\;negx%.l %0\"; + if (GET_CODE (operands[0]) == REG) + operands[1] = gen_rtx (REG, SImode, REGNO (operands[0]) + 1); + else + operands[1] = adj_offsettable_operand (operands[0], 4); + return \"neg%.l %1\;negx%.l %0\"; +} ") + (define_insn "negsi2" [(set (match_operand:SI 0 "general_operand" "=dm") (neg:SI (match_operand:SI 1 "general_operand" "0")))] @@ -4411,7 +4339,7 @@ [(set (match_operand:DI 0 "general_operand" "") (ashiftrt:DI (match_operand:DI 1 "general_operand" "") (match_operand 2 "const_int_operand" "")))] - "" + "!TARGET_5200" " { if (GET_CODE (operands[2]) != CONST_INT @@ -4445,7 +4373,7 @@ [(set (match_operand:HI 0 "register_operand" "=d") (ashiftrt:HI (match_operand:HI 1 "register_operand" "0") (match_operand:HI 2 "general_operand" "dI")))] - "" + "!TARGET_5200" "asr%.w %2,%0") (define_insn "" -- 2.30.2