From a64a6c2b7dfc2df687ac56c7e3bbe97badf479ae Mon Sep 17 00:00:00 2001 From: Roland Pesch Date: Sat, 24 Apr 1993 00:29:01 +0000 Subject: [PATCH] gdbinv-s.texi, gdb.texinfo: include Hitachi SH target gdb.texinfo: advance manual revision dates to present gdbinv-s.texi, gdb.texinfo, all-config.texi, h8-config.texi: stop using silly Roman numerals in @set variable names --- gdb/doc/ChangeLog | 9 +++++ gdb/doc/all-config.texi | 12 +++--- gdb/doc/gdb.texinfo | 87 ++++++++++++++++++++++++----------------- gdb/doc/gdbinv-s.texi | 58 ++++++++++++++++----------- gdb/doc/h8-config.texi | 15 +++---- 5 files changed, 109 insertions(+), 72 deletions(-) diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog index 0c518ef3155..5586edf5fb1 100644 --- a/gdb/doc/ChangeLog +++ b/gdb/doc/ChangeLog @@ -1,3 +1,12 @@ +Fri Apr 23 17:21:13 1993 Roland H. Pesch (pesch@fowanton.cygnus.com) + + * gdbinv-s.texi, gdb.texinfo: include Hitachi SH target + + * gdb.texinfo: advance manual revision dates to present + + * gdbinv-s.texi, gdb.texinfo, all-config.texi, h8-config.texi: + stop using silly Roman numerals in @set variable names + Fri Apr 23 07:30:01 1993 Jim Kingdon (kingdon@cygnus.com) * stabs.texinfo (Parameters): Keep trying to get this right. diff --git a/gdb/doc/all-config.texi b/gdb/doc/all-config.texi index fab8a62ad9d..765d4df88db 100644 --- a/gdb/doc/all-config.texi +++ b/gdb/doc/all-config.texi @@ -19,24 +19,24 @@ @set GENERIC @c @c Hitachi H8/300 target: -@set Hviii +@set H8 @c Hitachi H8/300 target ONLY: -@clear HviiiEXCLUSIVE +@clear H8EXCLUSIVE @c @c SPARC target: @set SPARC @c @c AMD 29000 target: -@set AMDxxixK +@set AMD29K @c @c Intel 960 target: -@set Icmlx +@set I960 @c @c Tandem ST2000 (phone switch) target: -@set STmm +@set ST2000 @c @c Zilog 8000 target: -@set ZviiiK +@set Z8K @c @c Lucid "Energize" environment: @clear LUCID diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index e1b33b61957..eb72f4d6f69 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -73,7 +73,7 @@ END-INFO-DIR-ENTRY This file documents the GNU debugger @value{GDBN}. @c !!set edition, date, version -This is Edition 4.07, January 1993, +This is Edition 4.09, April 1993, of @cite{Debugging with @value{GDBN}: the GNU Source-Level Debugger} for GDB Version @value{GDBVN}. @@ -108,12 +108,12 @@ instead of in the original English. @title Debugging with @value{GDBN} @subtitle The GNU Source-Level Debugger @ifclear GENERIC -@subtitle on @value{TARGET} Systems +@subtitle (@value{TARGET}) @end ifclear @sp 1 @c !!set edition, date, version -@subtitle Edition 4.07, for @value{GDBN} version @value{GDBVN} -@subtitle January 1993 +@subtitle Edition 4.09, for @value{GDBN} version @value{GDBVN} +@subtitle April 1993 @author by Richard M. Stallman and Roland H. Pesch @page @tex @@ -154,7 +154,7 @@ instead of in the original English. This file describes @value{GDBN}, the GNU symbolic debugger. @c !!set edition, date, version -This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. +This is Edition 4.09, April 1993, for GDB Version @value{GDBVN}. @menu * Summary:: Summary of @value{GDBN} @@ -341,7 +341,7 @@ He also enhanced the command-completion support to cover C++ overloaded symbols. @end ifclear -Hitachi America, Ltd. sponsored the support for the H8/300 and H8/500. +Hitachi America, Ltd. sponsored the support for Hitachi microprocessors. @ifset NOVEL @node New Features @@ -718,10 +718,10 @@ or @kbd{C-d} to exit.) @node Invoking GDB @section Invoking @value{GDBN} -@ifset HviiiEXCLUSIVE +@ifset H8EXCLUSIVE For details on starting up @value{GDBP} as a -remote debugger attached to a Hitachi H8/300 or H8/500 board, see @ref{Hitachi -H8 Remote,,@value{GDBN} and the Hitachi H8/300 and H8/500}. +remote debugger attached to a Hitachi microprocessor, see @ref{Hitachi +Remote,,@value{GDBN} and Hitachi Microprocessors}. @end ifset Invoke @value{GDBN} by running the program @code{@value{GDBP}}. Once started, @@ -794,21 +794,21 @@ in sequential order. The order makes a difference when the @ifset REMOTESTUB * Remote Serial:: @value{GDBN} remote serial protocol @end ifset -@ifset Icmlx +@ifset I960 * i960-Nindy Remote:: @value{GDBN} with a remote i960 (Nindy) @end ifset -@ifset AMDxxixK +@ifset AMD29K * UDI29K Remote:: @value{GDBN} and the UDI protocol for AMD29K * EB29K Remote:: @value{GDBN} with a remote EB29K @end ifset @ifset VXWORKS * VxWorks Remote:: @value{GDBN} and VxWorks @end ifset -@ifset STmm +@ifset ST2000 * ST2000 Remote:: @value{GDBN} with a Tandem ST2000 @end ifset -@ifset Hviii -* Hitachi H8 Remote:: @value{GDBN} and the Hitachi H8/300 and H8/500 +@ifset H8 +* Hitachi Remote:: @value{GDBN} and Hitachi Microprocessors @end ifset @ifset SIMS * Simulator:: Simulated CPU target @@ -3476,7 +3476,7 @@ will be dumped. Two arguments specify a range of addresses (first inclusive, second exclusive) to dump. @end table -@ifclear HviiiEXCLUSIVE +@ifclear H8EXCLUSIVE We can use @code{disassemble} to inspect the object code range shown in the last @code{info line} example (the example shows SPARC machine instructions): @@ -3497,7 +3497,7 @@ End of assembler dump. @end smallexample @end ifclear -@ifset HviiiEXCLUSIVE +@ifset H8EXCLUSIVE For example, here is the beginning of the output for the disassembly of a function @code{fact}: @@ -3575,7 +3575,7 @@ command rather than @code{print}. @xref{Symbols, ,Examining the Symbol Table}. * Value History:: Value history * Convenience Vars:: Convenience variables * Registers:: Registers -@ifclear HviiiEXCLUSIVE +@ifclear HAVE-FLOAT * Floating Point Hardware:: Floating point hardware @end ifclear @end menu @@ -4558,7 +4558,7 @@ code generated by your compiler. If some registers are not saved, or if @value{GDBN} is unable to locate the saved registers, the selected stack frame will make no difference. -@ifset AMDxxixK +@ifset AMD29K @table @code @item set rstack_high_address @var{address} @kindex set rstack_high_address @@ -4581,7 +4581,7 @@ processors. @end table @end ifset -@ifclear HviiiEXCLUSIVE +@ifclear HAVE-FLOAT @node Floating Point Hardware @section Floating point hardware @cindex floating point @@ -6487,18 +6487,26 @@ On VxWorks, @code{load} will dynamically link @var{filename} on the current target system as well as adding its symbols in @value{GDBN}. @end ifset -@ifset Icmlx +@ifset I960 @cindex download to Nindy-960 With the Nindy interface to an Intel 960 board, @code{load} will download @var{filename} to the 960 as well as adding its symbols in @value{GDBN}. @end ifset -@ifset Hviii +@ifset H8 @cindex download to H8/300 or H8/500 @cindex H8/300 or H8/500 download -When you select remote debugging to a Hitachi H8/300 or H8/500 board -(@pxref{Hitachi H8 Remote,,@value{GDBN} and the Hitachi H8/300 and H8/500}), +@c start-sanitize-Hitachi-SH +@cindex download to Hitachi SH +@cindex Hitachi SH download +@c end-sanitize-Hitachi-SH +When you select remote debugging to a Hitachi +@c start-sanitize-Hitachi-SH +SH, +@c end-sanitize-Hitachi-SH +H8/300, or H8/500 board +(@pxref{Hitachi Remote,,@value{GDBN} and Hitachi Microprocessors}), the @code{load} command downloads your program to the Hitachi board and also opens it as the current executable target for @value{GDBN} on your host (like the @code{file} command). @@ -6815,7 +6823,7 @@ specifies what serial device to use for the connection (e.g. CPU simulator. @xref{Simulator,,Simulated CPU Target}. @end ifset -@ifset AMDxxixK +@ifset AMD29K @item target udi @var{keyword} @kindex target udi Remote AMD29K target, using the AMD UDI protocol. The @var{keyword} @@ -6832,16 +6840,23 @@ name of the program to be debugged, as it appears to DOS on the PC. @xref{EB29K Remote, ,@value{GDBN} with a remote EB29K}. @end ifset -@ifset Hviii +@ifset H8 @item target hms @kindex target hms -A Hitachi H8/300 or H8/500 board, attached via serial line to your host. Use -special commands @code{device} and @code{speed} to control the serial -line and the communications speed used. @xref{Hitachi H8 -Remote,,@value{GDBN} and the Hitachi H8/300 and H8/500}. +A Hitachi +@c start-sanitize-Hitachi-SH +SH, +@c end-sanitize-Hitachi-SH +H8/300, or H8/500 board, attached via serial line to your host. +@ifclear H8EXCLUSIVE +@c Unix only, not currently of interest for H8-only manual +Use special commands @code{device} and @code{speed} to control the serial +line and the communications speed used. +@end ifclear +@xref{Hitachi Remote,,@value{GDBN} and Hitachi Microprocessors}. @end ifset -@ifset Icmlx +@ifset I960 @item target nindy @var{devicename} @kindex target nindy An Intel 960 board controlled by a Nindy Monitor. @var{devicename} is @@ -6849,7 +6864,7 @@ the name of the serial device to use for the connection, e.g. @file{/dev/ttya}. @xref{i960-Nindy Remote, ,@value{GDBN} with a remote i960 (Nindy)}. @end ifset -@ifset STmm +@ifset ST2000 @item target st2000 @var{dev} @var{speed} @kindex target st2000 A Tandem ST2000 phone switch, running Tandem's STDBUG protocol. @var{dev} @@ -6901,21 +6916,21 @@ configuration of GDB; use @code{help targets} to list them. @ifset REMOTESTUB * Remote Serial:: @value{GDBN} remote serial protocol @end ifset -@ifset Icmlx +@ifset I960 * i960-Nindy Remote:: @value{GDBN} with a remote i960 (Nindy) @end ifset -@ifset AMDxxixK +@ifset AMD29K * UDI29K Remote:: @value{GDBN} and the UDI protocol for AMD29K * EB29K Remote:: @value{GDBN} with a remote EB29K @end ifset @ifset VXWORKS * VxWorks Remote:: @value{GDBN} and VxWorks @end ifset -@ifset STmm +@ifset ST2000 * ST2000 Remote:: @value{GDBN} with a Tandem ST2000 @end ifset -@ifset Hviii -* Hitachi H8 Remote:: @value{GDBN} and the Hitachi H8/300 and H8/500 +@ifset H8 +* Hitachi Remote:: @value{GDBN} and Hitachi Microprocessors @end ifset @ifset SIMS * Simulator:: Simulated CPU target diff --git a/gdb/doc/gdbinv-s.texi b/gdb/doc/gdbinv-s.texi index a94fa24c429..234cbdc4e8d 100644 --- a/gdb/doc/gdbinv-s.texi +++ b/gdb/doc/gdbinv-s.texi @@ -339,7 +339,7 @@ stream. @code{set remotedebug off} turns it off, and @code{show remotedebug} will show you its current state. @end ifset -@ifset Icmlx +@ifset I960 @node i960-Nindy Remote @subsection @value{GDBN} with a remote i960 (Nindy) @@ -444,7 +444,7 @@ a break is detected. @c @end group @end ifset -@ifset AMDxxixK +@ifset AMD29K @node UDI29K Remote @subsection @value{GDBN} and the UDI protocol for AMD29K @@ -655,7 +655,7 @@ unexpected events on the PC side of the connection. @end ifset -@ifset STmm +@ifset ST2000 @node ST2000 Remote @subsection @value{GDBN} with a Tandem ST2000 @@ -836,16 +836,17 @@ or suspended when you attach to it. If running, it will be suspended at the time of attachment. @end ifset -@ifset Hviii -@node Hitachi H8 Remote -@subsection @value{GDBN} and the Hitachi H8/300 and H8/500 -@value{GDBN} needs to know these things to talk to your H8/300 or H8/500: +@ifset H8 +@node Hitachi Remote +@subsection @value{GDBN} and Hitachi Microprocessors +@value{GDBN} needs to know these things to talk to your +Hitachi SH, H8/300, or H8/500: @enumerate @item -that you want to use @samp{target hms}, the remote debugging -interface for the H8/300 and H8/500 (this is the default when -GDB is configured specifically for the H8/300 or H8/500); +that you want to use @samp{target hms}, the remote debugging interface +for Hitachi microprocessors (this is the default when GDB is configured +specifically for the Hitachi SH, H8/300, or H8/500); @item what serial device connects your host to your Hitachi board (the first @@ -858,32 +859,37 @@ what speed to use over the serial device. @end ignore @end enumerate -@ignore +@ifclear H8EXCLUSIVE @c only for Unix hosts @kindex device -@cindex serial device, H8/300 or H8/500 +@cindex serial device, Hitachi micros Use the special @code{@value{GDBP}} command @samp{device @var{port}} if you need to explicitly set the serial device. The default @var{port} is the first available port on your host. This is only necessary on Unix hosts, where it is typically something like @file{/dev/ttya}. @kindex speed -@cindex serial line speed, H8/300 or H8/500 +@cindex serial line speed, Hitachi micros @code{@value{GDBP}} has another special command to set the communications speed: @samp{speed @var{bps}}. This command also is only used from Unix hosts; on DOS hosts, set the line speed as usual from outside GDB with the DOS @kbd{mode} command (for instance, @w{@samp{mode com2:9600,n,8,1,p}} for a 9600 bps connection). -@end ignore +The @samp{device} and @samp{speed} commands are available only when you +use a Unix host to debug your Hitachi microprocessor programs. If you +use a DOS host, +@end ifclear @value{GDBN} depends on an auxiliary terminate-and-stay-resident program called @code{asynctsr} to communicate with the development board through a PC serial port. You must also use the DOS @code{mode} command to set up the serial port on the DOS side. +@ifset DOSHOST The following sample session illustrates the steps needed to start a -program under @value{GDBN} control on an H8/300. The example uses a sample -H8/300 program called @file{t.x}. +program under @value{GDBN} control on an H8/300. The example uses a +sample H8/300 program called @file{t.x}. The procedure is the same for +the Hitachi SH and the H8/500. First hook up your development board. In this example, we use a board attached to serial port @code{COM2}; if you use a different serial @@ -966,6 +972,7 @@ to detect program completion. In either case, @value{GDBN} will see the effect of a @sc{reset} on the development board as a ``normal exit'' of your program. @end ifset +@end ifset @ifset SIMS @node Simulator @@ -974,25 +981,30 @@ development board as a ``normal exit'' of your program. @ifset GENERIC @cindex simulator @cindex simulator, Z8000 -@cindex simulator, H8/300 or H8/500 @cindex Z8000 simulator +@cindex simulator, H8/300 or H8/500 @cindex H8/300 or H8/500 simulator +@cindex simulator, Hitachi SH +@cindex Hitachi SH simulator @cindex CPU simulator For some configurations, @value{GDBN} includes a CPU simulator that you can use instead of a hardware CPU to debug your programs. Currently, a simulator is available when @value{GDBN} is configured to debug Zilog -Z8000 or Hitachi H8/300 or H8/500 targets. +Z8000 or Hitachi microprocessor targets. @end ifset @ifclear GENERIC -@ifset Hviii +@ifset H8 @cindex simulator, H8/300 or H8/500 @cindex Hitachi H8/300 or H8/500 simulator -When configured for debugging Hitachi H8/300 or H8/500 targets, -@value{GDBN} includes an H8/300 or H8/500 CPU simulator. +@cindex simulator, Hitachi SH +@cindex Hitachi SH simulator +When configured for debugging Hitachi microprocessor targets, +@value{GDBN} includes a CPU simulator for the target chip (a Hitachi SH, +H8/300, or H8/500). @end ifset -@ifset ZviiiK +@ifset Z8K @cindex simulator, Z8000 @cindex Zilog Z8000 simulator When configured for debugging Zilog Z8000 targets, @value{GDBN} includes @@ -1000,7 +1012,7 @@ a Z8000 simulator. @end ifset @end ifclear -@ifset ZviiiK +@ifset Z8K For the Z8000 family, @samp{target sim} simulates either the Z8002 (the unsegmented variant of the Z8000 architecture) or the Z8001 (the segmented variant). The simulator recognizes which architecture is diff --git a/gdb/doc/h8-config.texi b/gdb/doc/h8-config.texi index fb18ede02ba..167b5220fd5 100644 --- a/gdb/doc/h8-config.texi +++ b/gdb/doc/h8-config.texi @@ -2,15 +2,16 @@ @include GDBvn.texi @c @set AGGLOMERATION -@clear AMDxxixK +@clear AMD29K @set BARETARGET @set CONLY @set DOSHOST @clear FSFDOC @clear GENERIC -@set Hviii -@set HviiiEXCLUSIVE -@clear Icmlx +@set H8 +@set H8EXCLUSIVE +@clear HAVE-FLOAT +@clear I960 @clear NOVEL @clear POSIX @set PRECONFIGURED @@ -18,9 +19,9 @@ @set SIMS @clear SERIAL @clear SPARC -@clear STmm +@clear ST2000 @clear VXWORKS -@clear ZviiiK +@clear Z8K @c ---------------------------------------------------------------------- @c STRINGS: @c @@ -34,7 +35,7 @@ @set GDBINIT .gdbinit @c @c Name of target. -@set TARGET Hitachi H/300 and H/500 +@set TARGET Hitachi Microprocessors @c @c Name of GCC product @set NGCC GCC -- 2.30.2