From a6bf5f88c7be5ba1d1d9ebf1412e99886e0cf75c Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Fri, 20 May 2016 13:15:49 -0700 Subject: [PATCH] i965/fs: Enforce common regioning restrictions by SIMD splitting. This change addresses a number of hardware restrictions on the source and destination regions and other execution controls of regular FPU-like instructions that in some cases can be avoided by reducing the execution size of the instruction. Some of these restrictions (e.g. the one about 3src instructions not supporting compression on some hardware) are currently being worked around case by case in the generator with ad-hoc splitting code that is buggy in several ways (e.g. doesn't handle non-trivial execution controls which would break SIMD32 code), but it seems cleaner to implement as many restrictions as we can in a single lowering pass since that will allow us to simplify some of the surrounding code considerably and also make sure that we don't forget applying them in the future. Reviewed-by: Jason Ekstrand --- src/mesa/drivers/dri/i965/brw_fs.cpp | 124 ++++++++++++++++++++++----- 1 file changed, 104 insertions(+), 20 deletions(-) diff --git a/src/mesa/drivers/dri/i965/brw_fs.cpp b/src/mesa/drivers/dri/i965/brw_fs.cpp index 4666fa5ea9a..b1cd0d959fb 100644 --- a/src/mesa/drivers/dri/i965/brw_fs.cpp +++ b/src/mesa/drivers/dri/i965/brw_fs.cpp @@ -4617,6 +4617,108 @@ fs_visitor::lower_logical_sends() return progress; } +/** + * Get the closest allowed SIMD width for instruction \p inst accounting for + * some common regioning and execution control restrictions that apply to FPU + * instructions. These restrictions don't necessarily have any relevance to + * instructions not executed by the FPU pipeline like extended math, control + * flow or send message instructions. + * + * For virtual opcodes it's really up to the instruction -- In some cases + * (e.g. where a virtual instruction unrolls into a simple sequence of FPU + * instructions) it may simplify virtual instruction lowering if we can + * enforce FPU-like regioning restrictions already on the virtual instruction, + * in other cases (e.g. virtual send-like instructions) this may be + * excessively restrictive. + */ +static unsigned +get_fpu_lowered_simd_width(const struct brw_device_info *devinfo, + const fs_inst *inst) +{ + /* Maximum execution size representable in the instruction controls. */ + unsigned max_width = MIN2(32, inst->exec_size); + + /* According to the PRMs: + * "A. In Direct Addressing mode, a source cannot span more than 2 + * adjacent GRF registers. + * B. A destination cannot span more than 2 adjacent GRF registers." + * + * Look for the source or destination with the largest register region + * which is the one that is going to limit the overall execution size of + * the instruction due to this rule. + */ + unsigned reg_count = inst->regs_written; + + for (unsigned i = 0; i < inst->sources; i++) + reg_count = MAX2(reg_count, (unsigned)inst->regs_read(i)); + + /* Calculate the maximum execution size of the instruction based on the + * factor by which it goes over the hardware limit of 2 GRFs. + */ + if (reg_count > 2) + max_width = MIN2(max_width, inst->exec_size / DIV_ROUND_UP(reg_count, 2)); + + /* According to the IVB PRMs: + * "When destination spans two registers, the source MUST span two + * registers. The exception to the above rule: + * + * - When source is scalar, the source registers are not incremented. + * - When source is packed integer Word and destination is packed + * integer DWord, the source register is not incremented but the + * source sub register is incremented." + * + * The hardware specs from Gen4 to Gen7.5 mention similar regioning + * restrictions. The code below intentionally doesn't check whether the + * destination type is integer because empirically the hardware doesn't + * seem to care what the actual type is as long as it's dword-aligned. + */ + if (devinfo->gen < 8) { + for (unsigned i = 0; i < inst->sources; i++) { + if (inst->regs_written == 2 && + inst->regs_read(i) != 0 && inst->regs_read(i) != 2 && + !is_uniform(inst->src[i]) && + !(type_sz(inst->dst.type) == 4 && inst->dst.stride == 1 && + type_sz(inst->src[i].type) == 2 && inst->src[i].stride == 1)) + max_width = MIN2(max_width, inst->exec_size / + inst->regs_written); + } + } + + /* From the IVB PRMs: + * "When an instruction is SIMD32, the low 16 bits of the execution mask + * are applied for both halves of the SIMD32 instruction. If different + * execution mask channels are required, split the instruction into two + * SIMD16 instructions." + * + * There is similar text in the HSW PRMs. Gen4-6 don't even implement + * 32-wide control flow support in hardware and will behave similarly. + */ + if (devinfo->gen < 8 && !inst->force_writemask_all) + max_width = MIN2(max_width, 16); + + /* From the IVB PRMs (applies to HSW too): + * "Instructions with condition modifiers must not use SIMD32." + * + * From the BDW PRMs (applies to later hardware too): + * "Ternary instruction with condition modifiers must not use SIMD32." + */ + if (inst->conditional_mod && (devinfo->gen < 8 || inst->is_3src(devinfo))) + max_width = MIN2(max_width, 16); + + /* From the IVB PRMs (applies to other devices that don't have the + * brw_device_info::supports_simd16_3src flag set): + * "In Align16 access mode, SIMD16 is not allowed for DW operations and + * SIMD8 is not allowed for DF operations." + */ + if (inst->is_3src(devinfo) && !devinfo->supports_simd16_3src) + max_width = MIN2(max_width, inst->exec_size / reg_count); + + /* Only power-of-two execution sizes are representable in the instruction + * control fields. + */ + return 1 << _mesa_logbase2(max_width); +} + /** * Get the closest native SIMD width supported by the hardware for instruction * \p inst. The instruction will be left untouched by @@ -4661,26 +4763,8 @@ get_lowered_simd_width(const struct brw_device_info *devinfo, case BRW_OPCODE_SAD2: case BRW_OPCODE_MAD: case BRW_OPCODE_LRP: - case FS_OPCODE_PACK: { - /* According to the PRMs: - * "A. In Direct Addressing mode, a source cannot span more than 2 - * adjacent GRF registers. - * B. A destination cannot span more than 2 adjacent GRF registers." - * - * Look for the source or destination with the largest register region - * which is the one that is going to limit the overal execution size of - * the instruction due to this rule. - */ - unsigned reg_count = inst->regs_written; - - for (unsigned i = 0; i < inst->sources; i++) - reg_count = MAX2(reg_count, (unsigned)inst->regs_read(i)); - - /* Calculate the maximum execution size of the instruction based on the - * factor by which it goes over the hardware limit of 2 GRFs. - */ - return inst->exec_size / DIV_ROUND_UP(reg_count, 2); - } + case FS_OPCODE_PACK: + return get_fpu_lowered_simd_width(devinfo, inst); case SHADER_OPCODE_RCP: case SHADER_OPCODE_RSQ: -- 2.30.2