From a77aa7ec4b1a6eb18019cf59731bf1a524b0fea4 Mon Sep 17 00:00:00 2001 From: Andrew Cagney Date: Mon, 17 Mar 1997 15:29:29 +0000 Subject: [PATCH] * configure: Re-generate. * Make-common.in (CSEARCH): Do not include the gdb directory in the search path. * Make-common.in (SIM_ENDIAN, SIM_HOSTENDIAN, SIM_INLINE, SIM_WARNING): Drop, requiring the simulator specific Makefile.in to explicitly incorporate these. * aclocal.m4 (--enable-sim-alignment); New option. Strongly specify the alignment restrictions of the target architecture - without this option all alignment restrictions are accomodated. (--enable-sim-assert): New option. Conditionally compile in assertion statements. (--enable-sim-float): New option. Strongly specify the target's floating point support. (--enable-sim-hardware): New option. Specify the hardware devices included in the simulation. (--enable-sim-packages): New option. Specify the hardware packages included in the simulation. (--enable-sim-regparm): New option. Specify that parameters be passed in registers instead of on the stack. (--enable-sim-reserved-bits): New option. Specify that reserved bits within an instruction are are correctly set. (--enable-sim-smp): New option. Specify the level of SMP support to be included in the simulator. (--enable-sim-stdcall): New option. Specify an alternative function call convention. (--enable-sim-xor-endian): New option. Configure xor-endian support used by some targets to implement bi-endian support. --- sim/arm/ChangeLog | 4 + sim/arm/configure | 311 ++++++++++++++-------------------- sim/common/ChangeLog | 37 +++++ sim/common/Make-common.in | 8 +- sim/common/aclocal.m4 | 287 ++++++++++++++++++++++++++------ sim/common/configure | 60 +++++-- sim/d10v/configure | 311 ++++++++++++++-------------------- sim/erc32/configure | 325 ++++++++++++++---------------------- sim/h8300/ChangeLog | 4 + sim/h8300/configure | 311 ++++++++++++++-------------------- sim/igen/ChangeLog | 21 +++ sim/mips/ChangeLog | 4 + sim/mips/configure | 340 +++++++++++++++----------------------- sim/mn10300/ChangeLog | 4 + sim/mn10300/configure | 311 ++++++++++++++-------------------- sim/sh/ChangeLog | 4 + sim/sh/configure | 311 ++++++++++++++-------------------- sim/v850/ChangeLog | 4 + sim/v850/configure | 311 ++++++++++++++-------------------- 19 files changed, 1348 insertions(+), 1620 deletions(-) diff --git a/sim/arm/ChangeLog b/sim/arm/ChangeLog index b1a58778f2e..82f15626d4a 100644 --- a/sim/arm/ChangeLog +++ b/sim/arm/ChangeLog @@ -1,3 +1,7 @@ +Mon Mar 17 15:10:07 1997 Andrew Cagney + + * configure: Re-generate. + Fri Mar 14 10:34:11 1997 Michael Meissner * configure: Regenerate to track ../common/aclocal.m4 changes. diff --git a/sim/arm/configure b/sim/arm/configure index 9306041572a..7abaa13741e 100755 --- a/sim/arm/configure +++ b/sim/arm/configure @@ -1,7 +1,7 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12 +# Generated automatically using autoconf version 2.10 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -57,8 +57,6 @@ mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 ac_prev= for ac_option @@ -340,7 +338,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12" + echo "configure generated by autoconf version 2.10" exit 0 ;; -with-* | --with-*) @@ -442,14 +440,11 @@ do done # NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi +if test "${LANG+set}" = set; then LANG=C; export LANG; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h @@ -511,7 +506,6 @@ ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. @@ -578,7 +572,6 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:582: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -593,13 +586,12 @@ NONE) esac host=`$ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:603: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -611,13 +603,12 @@ NONE) esac target=`$ac_config_sub $target_alias` -target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:621: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -629,9 +620,9 @@ NONE) esac build=`$ac_config_sub $build_alias` -build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$build" 1>&6 test "$host_alias" != "$target_alias" && @@ -661,7 +652,6 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:665: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -690,7 +680,6 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:694: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -737,47 +726,7 @@ fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:781: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -786,7 +735,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -794,34 +743,29 @@ fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - if test $ac_cv_prog_gcc = yes; then GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:805: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + if test "${CFLAGS+set}" != set; then + echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes + ac_cv_prog_gcc_g=yes else - ac_cv_prog_cc_g=no + ac_cv_prog_gcc_g=no fi rm -f conftest* fi -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" +echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6 + if test $ac_cv_prog_gcc_g = yes; then + CFLAGS="-g -O" + else + CFLAGS="-O" + fi fi else GCC= @@ -839,12 +783,11 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:843: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in @@ -867,7 +810,7 @@ else ;; esac done - IFS="$ac_save_IFS" + IFS="$ac_save_ifs" fi if test "${ac_cv_path_install+set}" = set; then @@ -890,6 +833,31 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # Put a plausible default for CC_FOR_BUILD in Makefile. +# If we cannot run a trivial program, we must be cross compiling. +echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_c_cross=yes +else +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } +if test -s conftest && (./conftest; exit) 2>/dev/null; then + ac_cv_c_cross=no +else + ac_cv_c_cross=yes +fi +fi +rm -fr conftest* +fi + +echo "$ac_t""$ac_cv_c_cross" 1>&6 +cross_compiling=$ac_cv_c_cross if test "x$cross_compiling" = "xno"; then CC_FOR_BUILD='$(CC)' @@ -905,7 +873,6 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:909: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -936,11 +903,16 @@ fi + + + + + # Check whether --enable-sim-bswap or --disable-sim-bswap was given. if test "${enable_sim_bswap+set}" = set; then enableval="$enable_sim_bswap" case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";; + yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; no) sim_bswap="-DWITH_BSWAP=0";; *) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";; esac @@ -988,13 +960,43 @@ fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + # Check whether --enable-sim-trace or --disable-sim-trace was given. if test "${enable_sim_trace+set}" = set; then enableval="$enable_sim_trace" case "${enableval}" in - yes) sim_trace="-DTRACE=1";; - no) sim_trace="-DTRACE=0";; - *) sim_trace="-DTRACE='(${enableval})'";; + yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";; + no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";; + *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";; esac if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then echo "Setting sim trace = $sim_trace" 6>&1 @@ -1005,6 +1007,11 @@ fi + + + + + sim_link_files= sim_link_links= @@ -1026,7 +1033,6 @@ sim_link_links="${sim_link_links} targ-vals.def" echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1030: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1041,37 +1047,33 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1057: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* CPP=/lib/cpp fi @@ -1088,27 +1090,24 @@ echo "$ac_t""$CPP" 1>&6 for ac_hdr in unistd.h do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +ac_safe=`echo "$ac_hdr" | tr './\055' '___'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1094: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi @@ -1116,7 +1115,7 @@ rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'` cat >> confdefs.h < confcache <<\EOF # This file is a shell script that caches the results of configure @@ -1150,25 +1145,11 @@ cat > confcache <<\EOF # --recheck option to rerun configure. # EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache + sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \ + >> confcache if cmp -s $cache_file confcache; then : else @@ -1223,7 +1204,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12" + echo "$CONFIG_STATUS generated by autoconf version 2.10" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -1291,63 +1272,23 @@ s%@sim_cflags@%$sim_cflags%g s%@sim_debug@%$sim_debug%g s%@sim_trace@%$sim_trace%g s%@CPP@%$CPP%g -s%@sim_endian@%$sim_endian%g -s%@sim_hostendian@%$sim_hostendian%g -s%@sim_inline@%$sim_inline%g -s%@sim_warnings@%$sim_warnings%g CEOF EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + # Adjust relative srcdir, etc. for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` @@ -1375,7 +1316,6 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then [/$]*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac - echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." @@ -1384,16 +1324,14 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # $configure_input" ;; *) ac_comsub= ;; esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file fi; done -rm -f conftest.s* +rm -f conftest.subs # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. @@ -1414,17 +1352,11 @@ ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' -if test "${CONFIG_HEADERS+set}" != set; then -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -fi +CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"} for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac @@ -1432,8 +1364,7 @@ for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then echo creating $ac_file rm -f conftest.frag conftest.in conftest.out - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - cat $ac_file_inputs > conftest.in + cp $ac_given_srcdir/$ac_file_in conftest.in EOF @@ -1461,6 +1392,8 @@ EOF # Break up conftest.vals because some shells have a limit on # the size of here documents, and old seds have small limits too. +# Maximum number of lines to put in a single here document. +ac_max_here_lines=12 rm -f conftest.tail while : @@ -1547,11 +1480,7 @@ while test -n "$ac_sources"; do { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; } fi done -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF case "x$CONFIG_FILES" in xMakefile*) echo "Merging Makefile.sim+Make-common.sim into Makefile ..." rm -f Makesim1.tmp Makesim2.tmp Makefile diff --git a/sim/common/ChangeLog b/sim/common/ChangeLog index d5e2b587893..0937b304253 100644 --- a/sim/common/ChangeLog +++ b/sim/common/ChangeLog @@ -1,3 +1,40 @@ +Mon Mar 17 15:10:07 1997 Andrew Cagney + + * configure: Re-generate. + +Mon Mar 17 15:04:47 1997 Andrew Cagney + + * Make-common.in (CSEARCH): Do not include the gdb directory in + the search path. + +Mon Mar 17 13:16:26 1997 Andrew Cagney + + * Make-common.in (SIM_ENDIAN, SIM_HOSTENDIAN, SIM_INLINE, + SIM_WARNING): Drop, requiring the simulator specific Makefile.in + to explicitly incorporate these. + + * aclocal.m4 (--enable-sim-alignment); New option. Strongly + specify the alignment restrictions of the target architecture - + without this option all alignment restrictions are accomodated. + (--enable-sim-assert): New option. Conditionally compile in + assertion statements. + (--enable-sim-float): New option. Strongly specify the target's + floating point support. + (--enable-sim-hardware): New option. Specify the hardware devices + included in the simulation. + (--enable-sim-packages): New option. Specify the hardware + packages included in the simulation. + (--enable-sim-regparm): New option. Specify that parameters be + passed in registers instead of on the stack. + (--enable-sim-reserved-bits): New option. Specify that reserved + bits within an instruction are are correctly set. + (--enable-sim-smp): New option. Specify the level of SMP support + to be included in the simulator. + (--enable-sim-stdcall): New option. Specify an alternative + function call convention. + (--enable-sim-xor-endian): New option. Configure xor-endian + support used by some targets to implement bi-endian support. + Fri Mar 14 19:51:21 1997 Andrew Cagney * aclocal.m4 (--enable-sim-hostendian): New option. Allow the diff --git a/sim/common/Make-common.in b/sim/common/Make-common.in index 9964b925261..5588b8cad3d 100644 --- a/sim/common/Make-common.in +++ b/sim/common/Make-common.in @@ -70,11 +70,8 @@ CFLAGS = @CFLAGS@ SIM_BSWAP = @sim_bswap@ SIM_CFLAGS = @sim_cflags@ SIM_DEBUG = @sim_debug@ -SIM_ENDIAN = @sim_endian@ -SIM_HOSTENDIAN = @sim_hostendian@ -SIM_INLINE = @sim_inline@ SIM_TRACE = @sim_trace@ -SIM_WARNINGS = @sim_warnings@ + HDEFINES = @HDEFINES@ TDEFINES = @@ -109,11 +106,10 @@ SIM_EXTRA_CLEAN = ## COMMON_POST_CONFIG_FRAG CONFIG_CFLAGS = @DEFS@ $(SIM_CFLAGS) $(SIM_DEBUG) $(SIM_TRACE) $(SIM_BSWAP) \ - $(SIM_HOSTENDIAN) $(SIM_ENDIAN) $(SIM_INLINE) $(SIM_WARNINGS) \ $(SIM_EXTRA_CFLAGS) $(HDEFINES) $(TDEFINES) CSEARCH = -I. -I$(srcdir) -I../common -I$(srcdir)/../common \ -I../../include -I$(srcroot)/include \ - -I../../bfd -I$(srcroot)/bfd -I$(srcroot)/gdb \ + -I../../bfd -I$(srcroot)/bfd \ -I../../opcodes -I$(srcroot)/opcodes ALL_CFLAGS = $(CONFIG_CFLAGS) $(CSEARCH) $(CFLAGS) BUILD_CFLAGS = -g -O $(CSEARCH) diff --git a/sim/common/aclocal.m4 b/sim/common/aclocal.m4 index 301c5ec65cb..64480a8e692 100644 --- a/sim/common/aclocal.m4 +++ b/sim/common/aclocal.m4 @@ -46,11 +46,52 @@ AC_PROG_RANLIB . ${srcdir}/../../bfd/configure.host -dnl Standard simulator options. +dnl Standard (and optional) simulator options. dnl Eventually all simulators will support these. dnl Do not add any here that cannot be supported by all simulators. dnl Do not add similar but different options to a particular simulator, dnl all shall eventually behave the same way. +dnl +dnl For optional simulator options, a macro SIM_AC_OPTION_* is defined. +dnl Simulators that wish to use the relevant option specify the macro +dnl in the simulator specific configure.in file between the SIM_AC_COMMON +dnl and SIM_AC_OUTPUT lines. + + +dnl Specify the alignment restrictions of the target architecture. +dnl Without this option all possible alignment restrictions are accomidated. +AC_DEFUN(SIM_AC_OPTION_ALIGNMENT, +[ +AC_ARG_ENABLE(sim-alignment, +[ --enable-sim-alignment=align Specify strict or nonstrict alignment.], +[case "${enableval}" in + yes | strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";; + no | nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";; + 0 | default | DEFAULT) sim_alignment="-DWITH_ALIGNMENT=0";; + *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-alignment"); sim_alignment="";; +esac +if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then + echo "Setting alignment flags = $sim_alignment" 6>&1 +fi],[sim_alignment=""])dnl +AC_SUBST(sim_alignment) +])dnl + + +dnl Conditionally compile in assertion statements. +AC_DEFUN(SIM_AC_OPTION_ASSERT, +[ +AC_ARG_ENABLE(sim-assert, +[ --enable-sim-assert Specify whether to perform random assertions.], +[case "${enableval}" in + yes) sim_assert="-DWITH_ASSERT=1";; + no) sim_assert="-DWITH_ASSERT=0";; + *) AC_MSG_ERROR("--enable-sim-assert does not take a value"); sim_assert="";; +esac +if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then + echo "Setting assert flags = $sim_assert" 6>&1 +fi],[sim_assert=""])dnl +AC_SUBST(sim_assert) +]) dnl This is a generic option to enable special byte swapping @@ -58,7 +99,7 @@ dnl insns on *any* cpu. AC_ARG_ENABLE(sim-bswap, [ --enable-sim-bswap Use Host specific BSWAP instruction.], [case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";; + yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; no) sim_bswap="-DWITH_BSWAP=0";; *) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";; esac @@ -97,49 +138,6 @@ fi],[sim_debug=""])dnl AC_SUBST(sim_debug) -dnl --enable-sim-trace is for users of the simulator -dnl the allowable values are work-in-progress -AC_ARG_ENABLE(sim-trace, -[ --enable-sim-trace=opts Enable tracing flags], -[case "${enableval}" in - yes) sim_trace="-DTRACE=1";; - no) sim_trace="-DTRACE=0";; - *) sim_trace="-DTRACE='(${enableval})'";; -esac -if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then - echo "Setting sim trace = $sim_trace" 6>&1 -fi],[sim_trace=""])dnl -AC_SUBST(sim_trace) - - -dnl These are available to append to as desired. -sim_link_files= -sim_link_links= - -dnl Create tconfig.h either from simulator's tconfig.in or default one -dnl in common. -sim_link_links=tconfig.h -if test -f ${srcdir}/tconfig.in -then - sim_link_files=tconfig.in -else - sim_link_files=../common/tconfig.in -fi - -# targ-vals.def points to the libc macro description file. -case "${target}" in -*-*-*) TARG_VALS_DEF=../common/nltvals.def ;; -esac -sim_link_files="${sim_link_files} ${TARG_VALS_DEF}" -sim_link_links="${sim_link_links} targ-vals.def" - -]) dnl End of SIM_AC_COMMON - - -dnl Almost standard simulator options. -dnl Eventually all simulators will support these. - - dnl --enable-sim-endian={yes,no,big,little} is for simulators dnl that support both big and little endian targets. AC_DEFUN(SIM_AC_OPTION_ENDIAN, @@ -161,6 +159,7 @@ esac if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then echo "Setting endian flags = $sim_endian" 6>&1 fi],[sim_endian="${default_sim_endian}"])dnl +AC_SUBST(sim_endian) ]) @@ -190,6 +189,49 @@ if test "x$cross_compiling" = "xno"; then else sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" fi])dnl +AC_SUBST(sim_hostendian) +]) + + +AC_DEFUN(SIM_AC_OPTION_FLOAT, +[ +AC_ARG_ENABLE(sim-float, +[ --enable-sim-float Specify whether to use host floating point or simulate.], +[case "${enableval}" in + yes | hard) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";; + no | soft) sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";; + *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-float"); sim_float="";; +esac +if test x"$silent" != x"yes" && test x"$sim_float" != x""; then + echo "Setting float flags = $sim_float" 6>&1 +fi],[sim_float=""])dnl +AC_SUBST(sim_float) +]) + + +AC_DEFUN(SIM_AC_OPTION_HARDWARE, +[ +AC_ARG_ENABLE(sim-hardware, +[ --enable-sim-hardware=list Specify the hardware to be included in the build.], +[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide" +case "${enableval}" in + yes) ;; + no) AC_MSG_ERROR("List of hardware must be specified for --enable-sim-hardware"); hardware="";; + ,*) hardware="${hardware}${enableval}";; + *,) hardware="${enableval}${hardware}";; + *) hardware="${enableval}"'';; +esac +sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'` +sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'` +if test x"$silent" != x"yes" && test x"$hardware" != x""; then + echo "Setting hardware to $sim_hw_src, $sim_hw_obj" +fi],[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide" +sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'` +sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'` +if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_src, $sim_hw_obj" +fi])dnl +AC_SUBST(sim_hardware) ]) @@ -231,9 +273,120 @@ fi],[if test x"$GCC" != "x" -a x"${default_sim_inline}" != "x" ; then else sim_inline="" fi])dnl +AC_SUBST(sim_inline) +]) + + +AC_DEFUN(SIM_AC_OPTION_PACKAGES, +[ +AC_ARG_ENABLE(sim-packages, +[ --enable-sim-packages=list Specify the packages to be included in the build.], +[packages=disklabel +case "${enableval}" in + yes) ;; + no) AC_MSG_ERROR("List of packages must be specified for --enable-sim-packages"); packages="";; + ,*) packages="${packages}${enableval}";; + *,) packages="${enableval}${packages}";; + *) packages="${enableval}"'';; +esac +sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'` +sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'` +if test x"$silent" != x"yes" && test x"$packages" != x""; then + echo "Setting packages to $sim_pk_src, $sim_pk_obj" +fi],[packages=disklabel +sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'` +sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'` +if test x"$silent" != x"yes"; then + echo "Setting packages to $sim_pk_src, $sim_pk_obj" +fi])dnl +AC_SUBST(sim_packages) +]) + + +AC_DEFUN(SIM_AC_OPTION_REGPARM, +[ +AC_ARG_ENABLE(sim-regparm, +[ --enable-sim-regparm=nr-parm Pass parameters in registers instead of on the stack - x86/GCC specific.], +[case "${enableval}" in + 0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) sim_regparm="-DWITH_REGPARM=${enableval}";; + no) sim_regparm="" ;; + yes) sim_regparm="-DWITH_REGPARM=3";; + *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-regparm"); sim_regparm="";; +esac +if test x"$silent" != x"yes" && test x"$sim_regparm" != x""; then + echo "Setting regparm flags = $sim_regparm" 6>&1 +fi],[sim_regparm=""])dnl +AC_SUBST(sim_regparm) +]) + + +AC_DEFUN(SIM_AC_OPTION_RESERVED_BITS, +[ +AC_ARG_ENABLE(sim-reserved-bits, +[ --enable-sim-reserved-bits Specify whether to check reserved bits in instruction.], +[case "${enableval}" in + yes) sim_reserved_bits="-DWITH_RESERVED_BITS=1";; + no) sim_reserved_bits="-DWITH_RESERVED_BITS=0";; + *) AC_MSG_ERROR("--enable-sim-reserved-bits does not take a value"); sim_reserved_bits="";; +esac +if test x"$silent" != x"yes" && test x"$sim_reserved_bits" != x""; then + echo "Setting reserved flags = $sim_reserved_bits" 6>&1 +fi],[sim_reserved_bits=""])dnl +AC_SUBST(sim_reserved_bits) +]) + + +AC_DEFUN(SIM_AC_OPTION_SMP, +[ +AC_ARG_ENABLE(sim-smp, +[ --enable-sim-smp=n Specify number of processors to configure for.], +[case "${enableval}" in + yes) sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5";; + no) sim_smp="-DWITH_SMP=0" ; sim_igen_smp="-N 0";; + *) sim_smp="-DWITH_SMP=$enableval" ; sim_igen_smp="-N $enableval";; +esac +if test x"$silent" != x"yes" && test x"$sim_smp" != x""; then + echo "Setting smp flags = $sim_smp" 6>&1 +fi],[sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5" +if test x"$silent" != x"yes"; then + echo "Setting smp flags = $sim_smp" 6>&1 +fi])dnl +AC_SUBST(sim_smp) ]) +AC_DEFUN(SIM_AC_OPTION_STDCALL, +[ +AC_ARG_ENABLE(sim-stdcall, +[ --enable-sim-stdcall=type Use an alternative function call/return mechanism - x86/GCC specific.], +[case "${enableval}" in + no) sim_stdcall="" ;; + std*) sim_stdcall="-DWITH_STDCALL=1";; + yes) sim_stdcall="-DWITH_STDCALL=1";; + *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-stdcall"); sim_stdcall="";; +esac +if test x"$silent" != x"yes" && test x"$sim_stdcall" != x""; then + echo "Setting function call flags = $sim_stdcall" 6>&1 +fi],[sim_stdcall=""])dnl +AC_SUBST(sim_stdcall) +]) + + +dnl --enable-sim-trace is for users of the simulator +dnl the allowable values are work-in-progress +AC_ARG_ENABLE(sim-trace, +[ --enable-sim-trace=opts Enable tracing flags], +[case "${enableval}" in + yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";; + no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";; + *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";; +esac +if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then + echo "Setting sim trace = $sim_trace" 6>&1 +fi],[sim_trace=""])dnl +AC_SUBST(sim_trace) + + dnl --enable-sim-warnings is for developers of the simulator. dnl it enables extra GCC specific warnings. AC_DEFUN(SIM_AC_OPTION_WARNINGS, @@ -248,9 +401,47 @@ esac if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then echo "Setting warning flags = $sim_warnings" 6>&1 fi],[sim_warnings=""])dnl +AC_SUBST(sim_warnings) ]) +AC_DEFUN(SIM_AC_OPTION_XOR_ENDIAN, +[ +AC_ARG_ENABLE(sim-xor-endian, +[ --enable-sim-xor-endian=n Specify number bytes involved in PowerPC XOR bi-endian mode (default 8).], +[case "${enableval}" in + yes) sim_xor_endian="-DWITH_XOR_ENDIAN=8";; + no) sim_xor_endian="-DWITH_XOR_ENDIAN=0";; + *) sim_xor_endian="-DWITH_XOR_ENDIAN=$enableval";; +esac +if test x"$silent" != x"yes" && test x"$sim_xor_endian" != x""; then + echo "Setting xor-endian flag = $sim_xor_endian" 6>&1 +fi],[sim_xor_endian=""])dnl +AC_SUBST(sim_xor_endian) +]) + +dnl These are available to append to as desired. +sim_link_files= +sim_link_links= + +dnl Create tconfig.h either from simulator's tconfig.in or default one +dnl in common. +sim_link_links=tconfig.h +if test -f ${srcdir}/tconfig.in +then + sim_link_files=tconfig.in +else + sim_link_files=../common/tconfig.in +fi + +# targ-vals.def points to the libc macro description file. +case "${target}" in +*-*-*) TARG_VALS_DEF=../common/nltvals.def ;; +esac +sim_link_files="${sim_link_files} ${TARG_VALS_DEF}" +sim_link_links="${sim_link_links} targ-vals.def" + +]) dnl End of SIM_AC_COMMON dnl Generate the Makefile in a target specific directory. @@ -262,12 +453,6 @@ dnl the target's fragment at the appropriate points. AC_DEFUN(SIM_AC_OUTPUT, [ -dnl Optional options -AC_SUBST(sim_endian) -AC_SUBST(sim_hostendian) -AC_SUBST(sim_inline) -AC_SUBST(sim_warnings) -dnl AC_LINK_FILES($sim_link_files, $sim_link_links) AC_OUTPUT(Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in, [case "x$CONFIG_FILES" in xMakefile*) diff --git a/sim/common/configure b/sim/common/configure index 623a7ae7487..f6d2a9488cb 100755 --- a/sim/common/configure +++ b/sim/common/configure @@ -904,11 +904,16 @@ fi + + + + + # Check whether --enable-sim-bswap or --disable-sim-bswap was given. if test "${enable_sim_bswap+set}" = set; then enableval="$enable_sim_bswap" case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";; + yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; no) sim_bswap="-DWITH_BSWAP=0";; *) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";; esac @@ -956,13 +961,43 @@ fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + # Check whether --enable-sim-trace or --disable-sim-trace was given. if test "${enable_sim_trace+set}" = set; then enableval="$enable_sim_trace" case "${enableval}" in - yes) sim_trace="-DTRACE=1";; - no) sim_trace="-DTRACE=0";; - *) sim_trace="-DTRACE='(${enableval})'";; + yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";; + no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";; + *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";; esac if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then echo "Setting sim trace = $sim_trace" 6>&1 @@ -973,6 +1008,11 @@ fi + + + + + sim_link_files= sim_link_links= @@ -1037,13 +1077,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1047: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1087: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : @@ -1052,13 +1092,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1062: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1102: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : @@ -1086,12 +1126,12 @@ if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1095: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1135: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* diff --git a/sim/d10v/configure b/sim/d10v/configure index 9306041572a..7abaa13741e 100755 --- a/sim/d10v/configure +++ b/sim/d10v/configure @@ -1,7 +1,7 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12 +# Generated automatically using autoconf version 2.10 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -57,8 +57,6 @@ mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 ac_prev= for ac_option @@ -340,7 +338,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12" + echo "configure generated by autoconf version 2.10" exit 0 ;; -with-* | --with-*) @@ -442,14 +440,11 @@ do done # NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi +if test "${LANG+set}" = set; then LANG=C; export LANG; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h @@ -511,7 +506,6 @@ ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. @@ -578,7 +572,6 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:582: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -593,13 +586,12 @@ NONE) esac host=`$ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:603: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -611,13 +603,12 @@ NONE) esac target=`$ac_config_sub $target_alias` -target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:621: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -629,9 +620,9 @@ NONE) esac build=`$ac_config_sub $build_alias` -build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$build" 1>&6 test "$host_alias" != "$target_alias" && @@ -661,7 +652,6 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:665: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -690,7 +680,6 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:694: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -737,47 +726,7 @@ fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:781: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -786,7 +735,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -794,34 +743,29 @@ fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - if test $ac_cv_prog_gcc = yes; then GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:805: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + if test "${CFLAGS+set}" != set; then + echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes + ac_cv_prog_gcc_g=yes else - ac_cv_prog_cc_g=no + ac_cv_prog_gcc_g=no fi rm -f conftest* fi -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" +echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6 + if test $ac_cv_prog_gcc_g = yes; then + CFLAGS="-g -O" + else + CFLAGS="-O" + fi fi else GCC= @@ -839,12 +783,11 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:843: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in @@ -867,7 +810,7 @@ else ;; esac done - IFS="$ac_save_IFS" + IFS="$ac_save_ifs" fi if test "${ac_cv_path_install+set}" = set; then @@ -890,6 +833,31 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # Put a plausible default for CC_FOR_BUILD in Makefile. +# If we cannot run a trivial program, we must be cross compiling. +echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_c_cross=yes +else +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } +if test -s conftest && (./conftest; exit) 2>/dev/null; then + ac_cv_c_cross=no +else + ac_cv_c_cross=yes +fi +fi +rm -fr conftest* +fi + +echo "$ac_t""$ac_cv_c_cross" 1>&6 +cross_compiling=$ac_cv_c_cross if test "x$cross_compiling" = "xno"; then CC_FOR_BUILD='$(CC)' @@ -905,7 +873,6 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:909: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -936,11 +903,16 @@ fi + + + + + # Check whether --enable-sim-bswap or --disable-sim-bswap was given. if test "${enable_sim_bswap+set}" = set; then enableval="$enable_sim_bswap" case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";; + yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; no) sim_bswap="-DWITH_BSWAP=0";; *) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";; esac @@ -988,13 +960,43 @@ fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + # Check whether --enable-sim-trace or --disable-sim-trace was given. if test "${enable_sim_trace+set}" = set; then enableval="$enable_sim_trace" case "${enableval}" in - yes) sim_trace="-DTRACE=1";; - no) sim_trace="-DTRACE=0";; - *) sim_trace="-DTRACE='(${enableval})'";; + yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";; + no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";; + *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";; esac if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then echo "Setting sim trace = $sim_trace" 6>&1 @@ -1005,6 +1007,11 @@ fi + + + + + sim_link_files= sim_link_links= @@ -1026,7 +1033,6 @@ sim_link_links="${sim_link_links} targ-vals.def" echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1030: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1041,37 +1047,33 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1057: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* CPP=/lib/cpp fi @@ -1088,27 +1090,24 @@ echo "$ac_t""$CPP" 1>&6 for ac_hdr in unistd.h do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +ac_safe=`echo "$ac_hdr" | tr './\055' '___'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1094: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi @@ -1116,7 +1115,7 @@ rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'` cat >> confdefs.h < confcache <<\EOF # This file is a shell script that caches the results of configure @@ -1150,25 +1145,11 @@ cat > confcache <<\EOF # --recheck option to rerun configure. # EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache + sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \ + >> confcache if cmp -s $cache_file confcache; then : else @@ -1223,7 +1204,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12" + echo "$CONFIG_STATUS generated by autoconf version 2.10" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -1291,63 +1272,23 @@ s%@sim_cflags@%$sim_cflags%g s%@sim_debug@%$sim_debug%g s%@sim_trace@%$sim_trace%g s%@CPP@%$CPP%g -s%@sim_endian@%$sim_endian%g -s%@sim_hostendian@%$sim_hostendian%g -s%@sim_inline@%$sim_inline%g -s%@sim_warnings@%$sim_warnings%g CEOF EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + # Adjust relative srcdir, etc. for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` @@ -1375,7 +1316,6 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then [/$]*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac - echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." @@ -1384,16 +1324,14 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # $configure_input" ;; *) ac_comsub= ;; esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file fi; done -rm -f conftest.s* +rm -f conftest.subs # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. @@ -1414,17 +1352,11 @@ ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' -if test "${CONFIG_HEADERS+set}" != set; then -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -fi +CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"} for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac @@ -1432,8 +1364,7 @@ for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then echo creating $ac_file rm -f conftest.frag conftest.in conftest.out - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - cat $ac_file_inputs > conftest.in + cp $ac_given_srcdir/$ac_file_in conftest.in EOF @@ -1461,6 +1392,8 @@ EOF # Break up conftest.vals because some shells have a limit on # the size of here documents, and old seds have small limits too. +# Maximum number of lines to put in a single here document. +ac_max_here_lines=12 rm -f conftest.tail while : @@ -1547,11 +1480,7 @@ while test -n "$ac_sources"; do { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; } fi done -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF case "x$CONFIG_FILES" in xMakefile*) echo "Merging Makefile.sim+Make-common.sim into Makefile ..." rm -f Makesim1.tmp Makesim2.tmp Makefile diff --git a/sim/erc32/configure b/sim/erc32/configure index b0e785d1d91..2464322ef1f 100755 --- a/sim/erc32/configure +++ b/sim/erc32/configure @@ -1,7 +1,7 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12 +# Generated automatically using autoconf version 2.10 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -57,8 +57,6 @@ mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 ac_prev= for ac_option @@ -340,7 +338,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12" + echo "configure generated by autoconf version 2.10" exit 0 ;; -with-* | --with-*) @@ -442,14 +440,11 @@ do done # NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi +if test "${LANG+set}" = set; then LANG=C; export LANG; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h @@ -511,7 +506,6 @@ ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. @@ -578,7 +572,6 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:582: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -593,13 +586,12 @@ NONE) esac host=`$ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:603: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -611,13 +603,12 @@ NONE) esac target=`$ac_config_sub $target_alias` -target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:621: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -629,9 +620,9 @@ NONE) esac build=`$ac_config_sub $build_alias` -build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$build" 1>&6 test "$host_alias" != "$target_alias" && @@ -661,7 +652,6 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:665: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -690,7 +680,6 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:694: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -737,47 +726,7 @@ fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:781: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -786,7 +735,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -794,34 +743,29 @@ fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - if test $ac_cv_prog_gcc = yes; then GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:805: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + if test "${CFLAGS+set}" != set; then + echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes + ac_cv_prog_gcc_g=yes else - ac_cv_prog_cc_g=no + ac_cv_prog_gcc_g=no fi rm -f conftest* fi -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" +echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6 + if test $ac_cv_prog_gcc_g = yes; then + CFLAGS="-g -O" + else + CFLAGS="-O" + fi fi else GCC= @@ -839,12 +783,11 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:843: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in @@ -867,7 +810,7 @@ else ;; esac done - IFS="$ac_save_IFS" + IFS="$ac_save_ifs" fi if test "${ac_cv_path_install+set}" = set; then @@ -890,6 +833,31 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # Put a plausible default for CC_FOR_BUILD in Makefile. +# If we cannot run a trivial program, we must be cross compiling. +echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_c_cross=yes +else +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } +if test -s conftest && (./conftest; exit) 2>/dev/null; then + ac_cv_c_cross=no +else + ac_cv_c_cross=yes +fi +fi +rm -fr conftest* +fi + +echo "$ac_t""$ac_cv_c_cross" 1>&6 +cross_compiling=$ac_cv_c_cross if test "x$cross_compiling" = "xno"; then CC_FOR_BUILD='$(CC)' @@ -905,7 +873,6 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:909: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -936,11 +903,16 @@ fi + + + + + # Check whether --enable-sim-bswap or --disable-sim-bswap was given. if test "${enable_sim_bswap+set}" = set; then enableval="$enable_sim_bswap" case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";; + yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; no) sim_bswap="-DWITH_BSWAP=0";; *) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";; esac @@ -988,13 +960,43 @@ fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + # Check whether --enable-sim-trace or --disable-sim-trace was given. if test "${enable_sim_trace+set}" = set; then enableval="$enable_sim_trace" case "${enableval}" in - yes) sim_trace="-DTRACE=1";; - no) sim_trace="-DTRACE=0";; - *) sim_trace="-DTRACE='(${enableval})'";; + yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";; + no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";; + *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";; esac if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then echo "Setting sim trace = $sim_trace" 6>&1 @@ -1005,6 +1007,11 @@ fi + + + + + sim_link_files= sim_link_links= @@ -1026,7 +1033,6 @@ sim_link_links="${sim_link_links} targ-vals.def" echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1030: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1041,37 +1047,33 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1057: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* CPP=/lib/cpp fi @@ -1088,27 +1090,24 @@ echo "$ac_t""$CPP" 1>&6 for ac_hdr in stdlib.h do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +ac_safe=`echo "$ac_hdr" | tr './\055' '___'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1094: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi @@ -1116,7 +1115,7 @@ rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'` cat >> confdefs.h <&6 -echo "configure:1132: checking for main in -ltermcap" >&5 -ac_lib_var=`echo termcap'_'main | sed 'y%./+-%__p_%'` +echo $ac_n "checking for -ltermcap""... $ac_c" 1>&6 +ac_lib_var=`echo termcap'_'main | tr './+\055' '__p_'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ltermcap $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi @@ -1168,10 +1165,6 @@ fi - - - - trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure @@ -1189,25 +1182,11 @@ cat > confcache <<\EOF # --recheck option to rerun configure. # EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache + sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \ + >> confcache if cmp -s $cache_file confcache; then : else @@ -1262,7 +1241,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12" + echo "$CONFIG_STATUS generated by autoconf version 2.10" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -1331,63 +1310,23 @@ s%@sim_debug@%$sim_debug%g s%@sim_trace@%$sim_trace%g s%@CPP@%$CPP%g s%@TERMCAP@%$TERMCAP%g -s%@sim_endian@%$sim_endian%g -s%@sim_hostendian@%$sim_hostendian%g -s%@sim_inline@%$sim_inline%g -s%@sim_warnings@%$sim_warnings%g CEOF EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + # Adjust relative srcdir, etc. for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` @@ -1415,7 +1354,6 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then [/$]*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac - echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." @@ -1424,16 +1362,14 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # $configure_input" ;; *) ac_comsub= ;; esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file fi; done -rm -f conftest.s* +rm -f conftest.subs # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. @@ -1454,17 +1390,11 @@ ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' -if test "${CONFIG_HEADERS+set}" != set; then -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -fi +CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"} for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac @@ -1472,8 +1402,7 @@ for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then echo creating $ac_file rm -f conftest.frag conftest.in conftest.out - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - cat $ac_file_inputs > conftest.in + cp $ac_given_srcdir/$ac_file_in conftest.in EOF @@ -1501,6 +1430,8 @@ EOF # Break up conftest.vals because some shells have a limit on # the size of here documents, and old seds have small limits too. +# Maximum number of lines to put in a single here document. +ac_max_here_lines=12 rm -f conftest.tail while : @@ -1587,11 +1518,7 @@ while test -n "$ac_sources"; do { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; } fi done -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF case "x$CONFIG_FILES" in xMakefile*) echo "Merging Makefile.sim+Make-common.sim into Makefile ..." rm -f Makesim1.tmp Makesim2.tmp Makefile diff --git a/sim/h8300/ChangeLog b/sim/h8300/ChangeLog index 7894f82d3f5..feaba37fdb0 100644 --- a/sim/h8300/ChangeLog +++ b/sim/h8300/ChangeLog @@ -1,3 +1,7 @@ +Mon Mar 17 15:10:07 1997 Andrew Cagney + + * configure: Re-generate. + Fri Mar 14 10:34:11 1997 Michael Meissner * configure: Regenerate to track ../common/aclocal.m4 changes. diff --git a/sim/h8300/configure b/sim/h8300/configure index f9c32c63f80..c7d3d2315ca 100755 --- a/sim/h8300/configure +++ b/sim/h8300/configure @@ -1,7 +1,7 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12 +# Generated automatically using autoconf version 2.10 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -57,8 +57,6 @@ mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 ac_prev= for ac_option @@ -340,7 +338,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12" + echo "configure generated by autoconf version 2.10" exit 0 ;; -with-* | --with-*) @@ -442,14 +440,11 @@ do done # NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi +if test "${LANG+set}" = set; then LANG=C; export LANG; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h @@ -511,7 +506,6 @@ ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. @@ -578,7 +572,6 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:582: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -593,13 +586,12 @@ NONE) esac host=`$ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:603: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -611,13 +603,12 @@ NONE) esac target=`$ac_config_sub $target_alias` -target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:621: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -629,9 +620,9 @@ NONE) esac build=`$ac_config_sub $build_alias` -build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$build" 1>&6 test "$host_alias" != "$target_alias" && @@ -661,7 +652,6 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:665: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -690,7 +680,6 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:694: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -737,47 +726,7 @@ fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:781: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -786,7 +735,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -794,34 +743,29 @@ fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - if test $ac_cv_prog_gcc = yes; then GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:805: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + if test "${CFLAGS+set}" != set; then + echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes + ac_cv_prog_gcc_g=yes else - ac_cv_prog_cc_g=no + ac_cv_prog_gcc_g=no fi rm -f conftest* fi -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" +echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6 + if test $ac_cv_prog_gcc_g = yes; then + CFLAGS="-g -O" + else + CFLAGS="-O" + fi fi else GCC= @@ -839,12 +783,11 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:843: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in @@ -867,7 +810,7 @@ else ;; esac done - IFS="$ac_save_IFS" + IFS="$ac_save_ifs" fi if test "${ac_cv_path_install+set}" = set; then @@ -890,6 +833,31 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # Put a plausible default for CC_FOR_BUILD in Makefile. +# If we cannot run a trivial program, we must be cross compiling. +echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_c_cross=yes +else +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } +if test -s conftest && (./conftest; exit) 2>/dev/null; then + ac_cv_c_cross=no +else + ac_cv_c_cross=yes +fi +fi +rm -fr conftest* +fi + +echo "$ac_t""$ac_cv_c_cross" 1>&6 +cross_compiling=$ac_cv_c_cross if test "x$cross_compiling" = "xno"; then CC_FOR_BUILD='$(CC)' @@ -905,7 +873,6 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:909: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -936,11 +903,16 @@ fi + + + + + # Check whether --enable-sim-bswap or --disable-sim-bswap was given. if test "${enable_sim_bswap+set}" = set; then enableval="$enable_sim_bswap" case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";; + yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; no) sim_bswap="-DWITH_BSWAP=0";; *) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";; esac @@ -988,13 +960,43 @@ fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + # Check whether --enable-sim-trace or --disable-sim-trace was given. if test "${enable_sim_trace+set}" = set; then enableval="$enable_sim_trace" case "${enableval}" in - yes) sim_trace="-DTRACE=1";; - no) sim_trace="-DTRACE=0";; - *) sim_trace="-DTRACE='(${enableval})'";; + yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";; + no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";; + *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";; esac if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then echo "Setting sim trace = $sim_trace" 6>&1 @@ -1005,6 +1007,11 @@ fi + + + + + sim_link_files= sim_link_links= @@ -1026,7 +1033,6 @@ sim_link_links="${sim_link_links} targ-vals.def" echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1030: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1041,37 +1047,33 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1057: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* CPP=/lib/cpp fi @@ -1088,27 +1090,24 @@ echo "$ac_t""$CPP" 1>&6 for ac_hdr in stdlib.h time.h do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +ac_safe=`echo "$ac_hdr" | tr './\055' '___'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1094: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi @@ -1116,7 +1115,7 @@ rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'` cat >> confdefs.h < confcache <<\EOF # This file is a shell script that caches the results of configure @@ -1150,25 +1145,11 @@ cat > confcache <<\EOF # --recheck option to rerun configure. # EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache + sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \ + >> confcache if cmp -s $cache_file confcache; then : else @@ -1223,7 +1204,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12" + echo "$CONFIG_STATUS generated by autoconf version 2.10" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -1291,63 +1272,23 @@ s%@sim_cflags@%$sim_cflags%g s%@sim_debug@%$sim_debug%g s%@sim_trace@%$sim_trace%g s%@CPP@%$CPP%g -s%@sim_endian@%$sim_endian%g -s%@sim_hostendian@%$sim_hostendian%g -s%@sim_inline@%$sim_inline%g -s%@sim_warnings@%$sim_warnings%g CEOF EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + # Adjust relative srcdir, etc. for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` @@ -1375,7 +1316,6 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then [/$]*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac - echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." @@ -1384,16 +1324,14 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # $configure_input" ;; *) ac_comsub= ;; esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file fi; done -rm -f conftest.s* +rm -f conftest.subs # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. @@ -1414,17 +1352,11 @@ ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' -if test "${CONFIG_HEADERS+set}" != set; then -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -fi +CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"} for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac @@ -1432,8 +1364,7 @@ for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then echo creating $ac_file rm -f conftest.frag conftest.in conftest.out - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - cat $ac_file_inputs > conftest.in + cp $ac_given_srcdir/$ac_file_in conftest.in EOF @@ -1461,6 +1392,8 @@ EOF # Break up conftest.vals because some shells have a limit on # the size of here documents, and old seds have small limits too. +# Maximum number of lines to put in a single here document. +ac_max_here_lines=12 rm -f conftest.tail while : @@ -1547,11 +1480,7 @@ while test -n "$ac_sources"; do { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; } fi done -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF case "x$CONFIG_FILES" in xMakefile*) echo "Merging Makefile.sim+Make-common.sim into Makefile ..." rm -f Makesim1.tmp Makesim2.tmp Makefile diff --git a/sim/igen/ChangeLog b/sim/igen/ChangeLog index ccdffeb8151..c65f088d465 100644 --- a/sim/igen/ChangeLog +++ b/sim/igen/ChangeLog @@ -1,3 +1,24 @@ + * ld-insn.h: Change insn_type to be derived from the portable + SIM_INT64_T. + + +Mon Mar 17 15:17:07 1997 Andrew Cagney + + * ld-decode.c (load_decode_table): Rename slash to reserved. + (dump_decode_rule): Ditto. + + * ld-insn.c (parse_insn_format): Differentiate between a `/' - + reserved bit - and a `*' - wild card. + (parse_insn_format): Change is_slash to more informative reserved. + (dump_insn_field): Ditto. + (insn_field_is_constant): Ditto. + (insn_table_expand_opcode): Ditto. + + * gen-idecode.c (print_idecode_validate): Make check_mask and + check_val the correct integer size. + (print_idecode_validate): Fix reserved bit check for 64 bit + targets. + Fri Mar 14 11:24:06 1997 Andrew Cagney * ld-insn.c (parse_insn_format): Accept '*' as an alternative of diff --git a/sim/mips/ChangeLog b/sim/mips/ChangeLog index 0098f28de6e..5c4984a43f9 100644 --- a/sim/mips/ChangeLog +++ b/sim/mips/ChangeLog @@ -1,3 +1,7 @@ +Mon Mar 17 15:10:07 1997 Andrew Cagney + + * configure: Re-generate. + Fri Mar 14 10:34:11 1997 Michael Meissner * configure: Regenerate to track ../common/aclocal.m4 changes. diff --git a/sim/mips/configure b/sim/mips/configure index cd2c3659f43..bade339d05f 100755 --- a/sim/mips/configure +++ b/sim/mips/configure @@ -1,7 +1,7 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12 +# Generated automatically using autoconf version 2.10 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -57,8 +57,6 @@ mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 ac_prev= for ac_option @@ -340,7 +338,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12" + echo "configure generated by autoconf version 2.10" exit 0 ;; -with-* | --with-*) @@ -442,14 +440,11 @@ do done # NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi +if test "${LANG+set}" = set; then LANG=C; export LANG; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h @@ -511,7 +506,6 @@ ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. @@ -578,7 +572,6 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:582: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -593,13 +586,12 @@ NONE) esac host=`$ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:603: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -611,13 +603,12 @@ NONE) esac target=`$ac_config_sub $target_alias` -target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:621: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -629,9 +620,9 @@ NONE) esac build=`$ac_config_sub $build_alias` -build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$build" 1>&6 test "$host_alias" != "$target_alias" && @@ -661,7 +652,6 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:665: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -690,7 +680,6 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:694: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -737,47 +726,7 @@ fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:781: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -786,7 +735,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -794,34 +743,29 @@ fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - if test $ac_cv_prog_gcc = yes; then GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:805: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + if test "${CFLAGS+set}" != set; then + echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes + ac_cv_prog_gcc_g=yes else - ac_cv_prog_cc_g=no + ac_cv_prog_gcc_g=no fi rm -f conftest* fi -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" +echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6 + if test $ac_cv_prog_gcc_g = yes; then + CFLAGS="-g -O" + else + CFLAGS="-O" + fi fi else GCC= @@ -839,12 +783,11 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:843: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in @@ -867,7 +810,7 @@ else ;; esac done - IFS="$ac_save_IFS" + IFS="$ac_save_ifs" fi if test "${ac_cv_path_install+set}" = set; then @@ -890,6 +833,31 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # Put a plausible default for CC_FOR_BUILD in Makefile. +# If we cannot run a trivial program, we must be cross compiling. +echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_c_cross=yes +else +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } +if test -s conftest && (./conftest; exit) 2>/dev/null; then + ac_cv_c_cross=no +else + ac_cv_c_cross=yes +fi +fi +rm -fr conftest* +fi + +echo "$ac_t""$ac_cv_c_cross" 1>&6 +cross_compiling=$ac_cv_c_cross if test "x$cross_compiling" = "xno"; then CC_FOR_BUILD='$(CC)' @@ -905,7 +873,6 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:909: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -936,11 +903,16 @@ fi + + + + + # Check whether --enable-sim-bswap or --disable-sim-bswap was given. if test "${enable_sim_bswap+set}" = set; then enableval="$enable_sim_bswap" case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";; + yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; no) sim_bswap="-DWITH_BSWAP=0";; *) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";; esac @@ -988,13 +960,43 @@ fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + # Check whether --enable-sim-trace or --disable-sim-trace was given. if test "${enable_sim_trace+set}" = set; then enableval="$enable_sim_trace" case "${enableval}" in - yes) sim_trace="-DTRACE=1";; - no) sim_trace="-DTRACE=0";; - *) sim_trace="-DTRACE='(${enableval})'";; + yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";; + no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";; + *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";; esac if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then echo "Setting sim trace = $sim_trace" 6>&1 @@ -1005,6 +1007,11 @@ fi + + + + + sim_link_files= sim_link_links= @@ -1038,7 +1045,6 @@ esac echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1042: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1053,37 +1059,33 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1063: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1069: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1080: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1084: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* CPP=/lib/cpp fi @@ -1100,27 +1102,24 @@ echo "$ac_t""$CPP" 1>&6 for ac_hdr in string.h strings.h stdlib.h do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +ac_safe=`echo "$ac_hdr" | tr './\055' '___'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1106: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1116: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1117: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi @@ -1128,7 +1127,7 @@ rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'` cat >> confdefs.h <&6 -echo "configure:1143: checking for fabs in -lm" >&5 -ac_lib_var=`echo m'_'fabs | sed 'y%./+-%__p_%'` +echo $ac_n "checking for -lm""... $ac_c" 1>&6 +ac_lib_var=`echo m'_'fabs | tr './+\055' '__p_'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1161: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi @@ -1173,8 +1170,7 @@ LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 - ac_tr_lib=HAVE_LIB`echo m | sed -e 's/[^a-zA-Z0-9_]/_/g' \ - -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` + ac_tr_lib=HAVE_LIB`echo m | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 -echo "configure:1192: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1216: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* -fi +fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` @@ -1243,10 +1237,6 @@ done - - - - trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure @@ -1264,25 +1254,11 @@ cat > confcache <<\EOF # --recheck option to rerun configure. # EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache + sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \ + >> confcache if cmp -s $cache_file confcache; then : else @@ -1337,7 +1313,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12" + echo "$CONFIG_STATUS generated by autoconf version 2.10" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -1406,63 +1382,23 @@ s%@sim_debug@%$sim_debug%g s%@sim_trace@%$sim_trace%g s%@SIMCONF@%$SIMCONF%g s%@CPP@%$CPP%g -s%@sim_endian@%$sim_endian%g -s%@sim_hostendian@%$sim_hostendian%g -s%@sim_inline@%$sim_inline%g -s%@sim_warnings@%$sim_warnings%g CEOF EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + # Adjust relative srcdir, etc. for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` @@ -1490,7 +1426,6 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then [/$]*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac - echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." @@ -1499,16 +1434,14 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # $configure_input" ;; *) ac_comsub= ;; esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file fi; done -rm -f conftest.s* +rm -f conftest.subs # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. @@ -1529,17 +1462,11 @@ ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' -if test "${CONFIG_HEADERS+set}" != set; then -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -fi +CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"} for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac @@ -1547,8 +1474,7 @@ for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then echo creating $ac_file rm -f conftest.frag conftest.in conftest.out - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - cat $ac_file_inputs > conftest.in + cp $ac_given_srcdir/$ac_file_in conftest.in EOF @@ -1576,6 +1502,8 @@ EOF # Break up conftest.vals because some shells have a limit on # the size of here documents, and old seds have small limits too. +# Maximum number of lines to put in a single here document. +ac_max_here_lines=12 rm -f conftest.tail while : @@ -1662,11 +1590,7 @@ while test -n "$ac_sources"; do { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; } fi done -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF case "x$CONFIG_FILES" in xMakefile*) echo "Merging Makefile.sim+Make-common.sim into Makefile ..." rm -f Makesim1.tmp Makesim2.tmp Makefile diff --git a/sim/mn10300/ChangeLog b/sim/mn10300/ChangeLog index aecb413054c..7728a22c73f 100644 --- a/sim/mn10300/ChangeLog +++ b/sim/mn10300/ChangeLog @@ -1,3 +1,7 @@ +Mon Mar 17 15:10:07 1997 Andrew Cagney + + * configure: Re-generate. + Fri Mar 14 10:34:11 1997 Michael Meissner * configure: Regenerate to track ../common/aclocal.m4 changes. diff --git a/sim/mn10300/configure b/sim/mn10300/configure index 9306041572a..7abaa13741e 100755 --- a/sim/mn10300/configure +++ b/sim/mn10300/configure @@ -1,7 +1,7 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12 +# Generated automatically using autoconf version 2.10 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -57,8 +57,6 @@ mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 ac_prev= for ac_option @@ -340,7 +338,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12" + echo "configure generated by autoconf version 2.10" exit 0 ;; -with-* | --with-*) @@ -442,14 +440,11 @@ do done # NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi +if test "${LANG+set}" = set; then LANG=C; export LANG; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h @@ -511,7 +506,6 @@ ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. @@ -578,7 +572,6 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:582: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -593,13 +586,12 @@ NONE) esac host=`$ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:603: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -611,13 +603,12 @@ NONE) esac target=`$ac_config_sub $target_alias` -target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:621: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -629,9 +620,9 @@ NONE) esac build=`$ac_config_sub $build_alias` -build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$build" 1>&6 test "$host_alias" != "$target_alias" && @@ -661,7 +652,6 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:665: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -690,7 +680,6 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:694: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -737,47 +726,7 @@ fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:781: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -786,7 +735,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -794,34 +743,29 @@ fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - if test $ac_cv_prog_gcc = yes; then GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:805: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + if test "${CFLAGS+set}" != set; then + echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes + ac_cv_prog_gcc_g=yes else - ac_cv_prog_cc_g=no + ac_cv_prog_gcc_g=no fi rm -f conftest* fi -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" +echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6 + if test $ac_cv_prog_gcc_g = yes; then + CFLAGS="-g -O" + else + CFLAGS="-O" + fi fi else GCC= @@ -839,12 +783,11 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:843: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in @@ -867,7 +810,7 @@ else ;; esac done - IFS="$ac_save_IFS" + IFS="$ac_save_ifs" fi if test "${ac_cv_path_install+set}" = set; then @@ -890,6 +833,31 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # Put a plausible default for CC_FOR_BUILD in Makefile. +# If we cannot run a trivial program, we must be cross compiling. +echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_c_cross=yes +else +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } +if test -s conftest && (./conftest; exit) 2>/dev/null; then + ac_cv_c_cross=no +else + ac_cv_c_cross=yes +fi +fi +rm -fr conftest* +fi + +echo "$ac_t""$ac_cv_c_cross" 1>&6 +cross_compiling=$ac_cv_c_cross if test "x$cross_compiling" = "xno"; then CC_FOR_BUILD='$(CC)' @@ -905,7 +873,6 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:909: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -936,11 +903,16 @@ fi + + + + + # Check whether --enable-sim-bswap or --disable-sim-bswap was given. if test "${enable_sim_bswap+set}" = set; then enableval="$enable_sim_bswap" case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";; + yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; no) sim_bswap="-DWITH_BSWAP=0";; *) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";; esac @@ -988,13 +960,43 @@ fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + # Check whether --enable-sim-trace or --disable-sim-trace was given. if test "${enable_sim_trace+set}" = set; then enableval="$enable_sim_trace" case "${enableval}" in - yes) sim_trace="-DTRACE=1";; - no) sim_trace="-DTRACE=0";; - *) sim_trace="-DTRACE='(${enableval})'";; + yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";; + no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";; + *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";; esac if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then echo "Setting sim trace = $sim_trace" 6>&1 @@ -1005,6 +1007,11 @@ fi + + + + + sim_link_files= sim_link_links= @@ -1026,7 +1033,6 @@ sim_link_links="${sim_link_links} targ-vals.def" echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1030: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1041,37 +1047,33 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1057: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* CPP=/lib/cpp fi @@ -1088,27 +1090,24 @@ echo "$ac_t""$CPP" 1>&6 for ac_hdr in unistd.h do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +ac_safe=`echo "$ac_hdr" | tr './\055' '___'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1094: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi @@ -1116,7 +1115,7 @@ rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'` cat >> confdefs.h < confcache <<\EOF # This file is a shell script that caches the results of configure @@ -1150,25 +1145,11 @@ cat > confcache <<\EOF # --recheck option to rerun configure. # EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache + sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \ + >> confcache if cmp -s $cache_file confcache; then : else @@ -1223,7 +1204,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12" + echo "$CONFIG_STATUS generated by autoconf version 2.10" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -1291,63 +1272,23 @@ s%@sim_cflags@%$sim_cflags%g s%@sim_debug@%$sim_debug%g s%@sim_trace@%$sim_trace%g s%@CPP@%$CPP%g -s%@sim_endian@%$sim_endian%g -s%@sim_hostendian@%$sim_hostendian%g -s%@sim_inline@%$sim_inline%g -s%@sim_warnings@%$sim_warnings%g CEOF EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + # Adjust relative srcdir, etc. for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` @@ -1375,7 +1316,6 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then [/$]*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac - echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." @@ -1384,16 +1324,14 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # $configure_input" ;; *) ac_comsub= ;; esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file fi; done -rm -f conftest.s* +rm -f conftest.subs # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. @@ -1414,17 +1352,11 @@ ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' -if test "${CONFIG_HEADERS+set}" != set; then -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -fi +CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"} for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac @@ -1432,8 +1364,7 @@ for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then echo creating $ac_file rm -f conftest.frag conftest.in conftest.out - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - cat $ac_file_inputs > conftest.in + cp $ac_given_srcdir/$ac_file_in conftest.in EOF @@ -1461,6 +1392,8 @@ EOF # Break up conftest.vals because some shells have a limit on # the size of here documents, and old seds have small limits too. +# Maximum number of lines to put in a single here document. +ac_max_here_lines=12 rm -f conftest.tail while : @@ -1547,11 +1480,7 @@ while test -n "$ac_sources"; do { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; } fi done -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF case "x$CONFIG_FILES" in xMakefile*) echo "Merging Makefile.sim+Make-common.sim into Makefile ..." rm -f Makesim1.tmp Makesim2.tmp Makefile diff --git a/sim/sh/ChangeLog b/sim/sh/ChangeLog index b949b6541cc..e0ebcbf4519 100644 --- a/sim/sh/ChangeLog +++ b/sim/sh/ChangeLog @@ -1,3 +1,7 @@ +Mon Mar 17 15:10:07 1997 Andrew Cagney + + * configure: Re-generate. + Fri Mar 14 10:34:11 1997 Michael Meissner * configure: Regenerate to track ../common/aclocal.m4 changes. diff --git a/sim/sh/configure b/sim/sh/configure index 9306041572a..7abaa13741e 100755 --- a/sim/sh/configure +++ b/sim/sh/configure @@ -1,7 +1,7 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12 +# Generated automatically using autoconf version 2.10 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -57,8 +57,6 @@ mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 ac_prev= for ac_option @@ -340,7 +338,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12" + echo "configure generated by autoconf version 2.10" exit 0 ;; -with-* | --with-*) @@ -442,14 +440,11 @@ do done # NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi +if test "${LANG+set}" = set; then LANG=C; export LANG; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h @@ -511,7 +506,6 @@ ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. @@ -578,7 +572,6 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:582: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -593,13 +586,12 @@ NONE) esac host=`$ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:603: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -611,13 +603,12 @@ NONE) esac target=`$ac_config_sub $target_alias` -target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:621: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -629,9 +620,9 @@ NONE) esac build=`$ac_config_sub $build_alias` -build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$build" 1>&6 test "$host_alias" != "$target_alias" && @@ -661,7 +652,6 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:665: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -690,7 +680,6 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:694: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -737,47 +726,7 @@ fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:781: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -786,7 +735,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -794,34 +743,29 @@ fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - if test $ac_cv_prog_gcc = yes; then GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:805: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + if test "${CFLAGS+set}" != set; then + echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes + ac_cv_prog_gcc_g=yes else - ac_cv_prog_cc_g=no + ac_cv_prog_gcc_g=no fi rm -f conftest* fi -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" +echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6 + if test $ac_cv_prog_gcc_g = yes; then + CFLAGS="-g -O" + else + CFLAGS="-O" + fi fi else GCC= @@ -839,12 +783,11 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:843: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in @@ -867,7 +810,7 @@ else ;; esac done - IFS="$ac_save_IFS" + IFS="$ac_save_ifs" fi if test "${ac_cv_path_install+set}" = set; then @@ -890,6 +833,31 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # Put a plausible default for CC_FOR_BUILD in Makefile. +# If we cannot run a trivial program, we must be cross compiling. +echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_c_cross=yes +else +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } +if test -s conftest && (./conftest; exit) 2>/dev/null; then + ac_cv_c_cross=no +else + ac_cv_c_cross=yes +fi +fi +rm -fr conftest* +fi + +echo "$ac_t""$ac_cv_c_cross" 1>&6 +cross_compiling=$ac_cv_c_cross if test "x$cross_compiling" = "xno"; then CC_FOR_BUILD='$(CC)' @@ -905,7 +873,6 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:909: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -936,11 +903,16 @@ fi + + + + + # Check whether --enable-sim-bswap or --disable-sim-bswap was given. if test "${enable_sim_bswap+set}" = set; then enableval="$enable_sim_bswap" case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";; + yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; no) sim_bswap="-DWITH_BSWAP=0";; *) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";; esac @@ -988,13 +960,43 @@ fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + # Check whether --enable-sim-trace or --disable-sim-trace was given. if test "${enable_sim_trace+set}" = set; then enableval="$enable_sim_trace" case "${enableval}" in - yes) sim_trace="-DTRACE=1";; - no) sim_trace="-DTRACE=0";; - *) sim_trace="-DTRACE='(${enableval})'";; + yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";; + no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";; + *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";; esac if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then echo "Setting sim trace = $sim_trace" 6>&1 @@ -1005,6 +1007,11 @@ fi + + + + + sim_link_files= sim_link_links= @@ -1026,7 +1033,6 @@ sim_link_links="${sim_link_links} targ-vals.def" echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1030: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1041,37 +1047,33 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1057: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* CPP=/lib/cpp fi @@ -1088,27 +1090,24 @@ echo "$ac_t""$CPP" 1>&6 for ac_hdr in unistd.h do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +ac_safe=`echo "$ac_hdr" | tr './\055' '___'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1094: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi @@ -1116,7 +1115,7 @@ rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'` cat >> confdefs.h < confcache <<\EOF # This file is a shell script that caches the results of configure @@ -1150,25 +1145,11 @@ cat > confcache <<\EOF # --recheck option to rerun configure. # EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache + sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \ + >> confcache if cmp -s $cache_file confcache; then : else @@ -1223,7 +1204,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12" + echo "$CONFIG_STATUS generated by autoconf version 2.10" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -1291,63 +1272,23 @@ s%@sim_cflags@%$sim_cflags%g s%@sim_debug@%$sim_debug%g s%@sim_trace@%$sim_trace%g s%@CPP@%$CPP%g -s%@sim_endian@%$sim_endian%g -s%@sim_hostendian@%$sim_hostendian%g -s%@sim_inline@%$sim_inline%g -s%@sim_warnings@%$sim_warnings%g CEOF EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + # Adjust relative srcdir, etc. for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` @@ -1375,7 +1316,6 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then [/$]*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac - echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." @@ -1384,16 +1324,14 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # $configure_input" ;; *) ac_comsub= ;; esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file fi; done -rm -f conftest.s* +rm -f conftest.subs # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. @@ -1414,17 +1352,11 @@ ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' -if test "${CONFIG_HEADERS+set}" != set; then -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -fi +CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"} for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac @@ -1432,8 +1364,7 @@ for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then echo creating $ac_file rm -f conftest.frag conftest.in conftest.out - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - cat $ac_file_inputs > conftest.in + cp $ac_given_srcdir/$ac_file_in conftest.in EOF @@ -1461,6 +1392,8 @@ EOF # Break up conftest.vals because some shells have a limit on # the size of here documents, and old seds have small limits too. +# Maximum number of lines to put in a single here document. +ac_max_here_lines=12 rm -f conftest.tail while : @@ -1547,11 +1480,7 @@ while test -n "$ac_sources"; do { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; } fi done -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF case "x$CONFIG_FILES" in xMakefile*) echo "Merging Makefile.sim+Make-common.sim into Makefile ..." rm -f Makesim1.tmp Makesim2.tmp Makefile diff --git a/sim/v850/ChangeLog b/sim/v850/ChangeLog index 0472b1733d2..0b3779afb84 100644 --- a/sim/v850/ChangeLog +++ b/sim/v850/ChangeLog @@ -1,3 +1,7 @@ +Mon Mar 17 15:10:07 1997 Andrew Cagney + + * configure: Re-generate. + Fri Mar 14 10:34:11 1997 Michael Meissner * configure: Regenerate to track ../common/aclocal.m4 changes. diff --git a/sim/v850/configure b/sim/v850/configure index 9306041572a..7abaa13741e 100755 --- a/sim/v850/configure +++ b/sim/v850/configure @@ -1,7 +1,7 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12 +# Generated automatically using autoconf version 2.10 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -57,8 +57,6 @@ mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 ac_prev= for ac_option @@ -340,7 +338,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12" + echo "configure generated by autoconf version 2.10" exit 0 ;; -with-* | --with-*) @@ -442,14 +440,11 @@ do done # NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi +if test "${LANG+set}" = set; then LANG=C; export LANG; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h @@ -511,7 +506,6 @@ ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. @@ -578,7 +572,6 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:582: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -593,13 +586,12 @@ NONE) esac host=`$ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:603: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -611,13 +603,12 @@ NONE) esac target=`$ac_config_sub $target_alias` -target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:621: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -629,9 +620,9 @@ NONE) esac build=`$ac_config_sub $build_alias` -build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` echo "$ac_t""$build" 1>&6 test "$host_alias" != "$target_alias" && @@ -661,7 +652,6 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:665: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -690,7 +680,6 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:694: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -737,47 +726,7 @@ fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:781: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -786,7 +735,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -794,34 +743,29 @@ fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - if test $ac_cv_prog_gcc = yes; then GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:805: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + if test "${CFLAGS+set}" != set; then + echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes + ac_cv_prog_gcc_g=yes else - ac_cv_prog_cc_g=no + ac_cv_prog_gcc_g=no fi rm -f conftest* fi -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" +echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6 + if test $ac_cv_prog_gcc_g = yes; then + CFLAGS="-g -O" + else + CFLAGS="-O" + fi fi else GCC= @@ -839,12 +783,11 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:843: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in @@ -867,7 +810,7 @@ else ;; esac done - IFS="$ac_save_IFS" + IFS="$ac_save_ifs" fi if test "${ac_cv_path_install+set}" = set; then @@ -890,6 +833,31 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # Put a plausible default for CC_FOR_BUILD in Makefile. +# If we cannot run a trivial program, we must be cross compiling. +echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_c_cross=yes +else +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } +if test -s conftest && (./conftest; exit) 2>/dev/null; then + ac_cv_c_cross=no +else + ac_cv_c_cross=yes +fi +fi +rm -fr conftest* +fi + +echo "$ac_t""$ac_cv_c_cross" 1>&6 +cross_compiling=$ac_cv_c_cross if test "x$cross_compiling" = "xno"; then CC_FOR_BUILD='$(CC)' @@ -905,7 +873,6 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:909: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -936,11 +903,16 @@ fi + + + + + # Check whether --enable-sim-bswap or --disable-sim-bswap was given. if test "${enable_sim_bswap+set}" = set; then enableval="$enable_sim_bswap" case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";; + yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; no) sim_bswap="-DWITH_BSWAP=0";; *) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";; esac @@ -988,13 +960,43 @@ fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + # Check whether --enable-sim-trace or --disable-sim-trace was given. if test "${enable_sim_trace+set}" = set; then enableval="$enable_sim_trace" case "${enableval}" in - yes) sim_trace="-DTRACE=1";; - no) sim_trace="-DTRACE=0";; - *) sim_trace="-DTRACE='(${enableval})'";; + yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";; + no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";; + *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";; esac if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then echo "Setting sim trace = $sim_trace" 6>&1 @@ -1005,6 +1007,11 @@ fi + + + + + sim_link_files= sim_link_links= @@ -1026,7 +1033,6 @@ sim_link_links="${sim_link_links} targ-vals.def" echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1030: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1041,37 +1047,33 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1057: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* CPP=/lib/cpp fi @@ -1088,27 +1090,24 @@ echo "$ac_t""$CPP" 1>&6 for ac_hdr in unistd.h do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +ac_safe=`echo "$ac_hdr" | tr './\055' '___'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1094: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi @@ -1116,7 +1115,7 @@ rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'` cat >> confdefs.h < confcache <<\EOF # This file is a shell script that caches the results of configure @@ -1150,25 +1145,11 @@ cat > confcache <<\EOF # --recheck option to rerun configure. # EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache + sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \ + >> confcache if cmp -s $cache_file confcache; then : else @@ -1223,7 +1204,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12" + echo "$CONFIG_STATUS generated by autoconf version 2.10" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -1291,63 +1272,23 @@ s%@sim_cflags@%$sim_cflags%g s%@sim_debug@%$sim_debug%g s%@sim_trace@%$sim_trace%g s%@CPP@%$CPP%g -s%@sim_endian@%$sim_endian%g -s%@sim_hostendian@%$sim_hostendian%g -s%@sim_inline@%$sim_inline%g -s%@sim_warnings@%$sim_warnings%g CEOF EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + # Adjust relative srcdir, etc. for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` @@ -1375,7 +1316,6 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then [/$]*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac - echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." @@ -1384,16 +1324,14 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # $configure_input" ;; *) ac_comsub= ;; esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file fi; done -rm -f conftest.s* +rm -f conftest.subs # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. @@ -1414,17 +1352,11 @@ ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' -if test "${CONFIG_HEADERS+set}" != set; then -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -fi +CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"} for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + # Support "outfile[:infile]", defaulting infile="outfile.in". case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac @@ -1432,8 +1364,7 @@ for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then echo creating $ac_file rm -f conftest.frag conftest.in conftest.out - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - cat $ac_file_inputs > conftest.in + cp $ac_given_srcdir/$ac_file_in conftest.in EOF @@ -1461,6 +1392,8 @@ EOF # Break up conftest.vals because some shells have a limit on # the size of here documents, and old seds have small limits too. +# Maximum number of lines to put in a single here document. +ac_max_here_lines=12 rm -f conftest.tail while : @@ -1547,11 +1480,7 @@ while test -n "$ac_sources"; do { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; } fi done -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF case "x$CONFIG_FILES" in xMakefile*) echo "Merging Makefile.sim+Make-common.sim into Makefile ..." rm -f Makesim1.tmp Makesim2.tmp Makefile -- 2.30.2