From ac3b79201d339c4cf6164b0c54be32185543cdd6 Mon Sep 17 00:00:00 2001 From: Andrew Cagney Date: Tue, 18 Mar 2003 21:50:27 +0000 Subject: [PATCH] just pretend these didn't get committed. --- gdb/testsuite/gdb.arch/e500-abi.exp~ | 94 ----------- gdb/testsuite/gdb.arch/e500-regs.exp~ | 229 -------------------------- 2 files changed, 323 deletions(-) delete mode 100644 gdb/testsuite/gdb.arch/e500-abi.exp~ delete mode 100644 gdb/testsuite/gdb.arch/e500-regs.exp~ diff --git a/gdb/testsuite/gdb.arch/e500-abi.exp~ b/gdb/testsuite/gdb.arch/e500-abi.exp~ deleted file mode 100644 index ed13f2ae07f..00000000000 --- a/gdb/testsuite/gdb.arch/e500-abi.exp~ +++ /dev/null @@ -1,94 +0,0 @@ -# Copyright 2003 Free Software Foundation, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Please email any bugs, comments, and/or additions to this file to: -# bug-gdb@prep.ai.mit.edu -# - -# Tests for Powerpc e500 ABI - - -if $tracelevel then { - strace $tracelevel -} - -# -# This file uses e500-abi.c for input. -# - -set prms_id 0 -set bug_id 0 - -if ![istarget "powerpc-*eabispe"] then { - verbose "Skipping e500 abi tests." - return -} - -set testfile "e500-abi" -set binfile ${objdir}/${subdir}/${testfile} - -set src1 ${srcdir}/${subdir}/${testfile}.c - -if { [gdb_compile ${src1} ${binfile} executable {debug additional_flags=-w}] != "" } { - gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." -} - -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -# -# Run to `main' where we begin our tests. -# - -if ![runto_main] then { - gdb_suppress_tests -} - -gdb_test "b marker" "Breakpoint 2 at.*file.*e500-abi.c, line \[0-9\]+." "break marker" -gdb_test "continue" "Breakpoint 2.*marker.*e500-abi.c.*" "continue to marker" -gdb_test "finish" "Run till exit from .0.*marker.*at.*e500-abi.c.*main \\(\\) at.*e500-abi.c.*res_vec = vec_func \\(a_vec,.*goes in r3.*" "back to main (1)" - -# now all the arguments of vec_func are initialized - -set pattern "vec_func .a_vec_f=.0, 55., b_vec_f=.0, 66., c_vec_f=.3.14.*2.18.*, d_vec_f=.5, 4., e_vec_f=.5, 6., f_vec_f=.6, 6, 7, 1., g_vec_f=.6, 6, 7, 9., h_vec_f=.3, 2., i_vec_f=.3, 2., l_vec_f=.3, 5., m_vec_f=.6, 9.." - -set pattern1 $pattern -append pattern1 " at.*e500-abi.c.*x = 2;" - -# Now let's call the function. This function has > 8 args, -# the last ones will go on the stack. -gdb_test "p vec_func(a_vec,b_vec,c_vec,d_vec,e_vec,f_vec,g_vec,h_vec,i_vec,l_vec,m_vec)" \ -".\[0-9\]+ = .6, 63." "call inferior function with vectors (1) " - -# Let's call the function again with dummy arguments. This is to clean -# up the contents of the ev registers before the next call. -gdb_test "p vec_func(a_vec_d,b_vec_d,c_vec_d,d_vec_d,e_vec_d,f_vec_d,g_vec_d,h_vec_d,i_vec_d,l_vec_d,m_vec_d)" \ -".\[0-9\]+ = .1, 1." "call inferior function with vectors (2) " - -# Let's step into the function, to see if the args are printed correctly. -gdb_test "step" \ - $pattern1 \ - "step into vec_func" - -set pattern2 $pattern -append pattern2 " at.*e500-abi.c.*main.*res_vec = vec_func .a_vec,.*goes in r3.*Value returned is.*= .6, 63." - -# Let's see if the result is returned correctly. -gdb_test "finish" \ - "Run till exit from .0.*$pattern2" \ - "vector value returned correctly" - diff --git a/gdb/testsuite/gdb.arch/e500-regs.exp~ b/gdb/testsuite/gdb.arch/e500-regs.exp~ deleted file mode 100644 index 97cb52cb8b1..00000000000 --- a/gdb/testsuite/gdb.arch/e500-regs.exp~ +++ /dev/null @@ -1,229 +0,0 @@ -# Copyright 2003 Free Software Foundation, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Please email any bugs, comments, and/or additions to this file to: -# bug-gdb@prep.ai.mit.edu -# - -# Tests for Powerpc E500 register setting and fetching - -if $tracelevel then { - strace $tracelevel -} - -# -# Test the use of registers, especially E500 registers, for Powerpc. -# This file uses e500-regs.c for input. -# - -set prms_id 0 -set bug_id 0 - -if ![istarget "powerpc-*eabispe"] then { - verbose "Skipping e500 register tests." - return -} - -set testfile "e500-regs" -set binfile ${objdir}/${subdir}/${testfile} -set src1 ${srcdir}/${subdir}/${testfile}.c - -if { [gdb_compile ${src1} ${binfile} executable {debug additional_flags=-w}] != "" } { - gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." -} - -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -# -# Run to `main' where we begin our tests. -# - -if ![runto_main] then { - gdb_suppress_tests -} - -# set all the registers integer portions to 1 -for {set i 0} {$i < 32} {incr i 1} { - for {set j 0} {$j < 2} {incr j 1} { - gdb_test "set \$ev$i.v2_int32\[$j\] = 1" "" "set reg ev$i.v4si.f\[$j\]" - } -} - -# Now execute some target code, so that GDB's register cache is flushed. - -#gdb_test "next" "" "" - -send_gdb "show endian\n" -gdb_expect { - -re "(The target endianness is set automatically .currently )(big|little)( endian.*)$gdb_prompt $" { - pass "endianness" - set endianness $expect_out(2,string) - } - -re ".*$gdb_prompt $" { - fail "couldn't get endianness" - } - timeout { fail "(timeout) endianness" } -} - -# And then read the E500 registers back, to see that -# a) the register write above worked, and -# b) the register read (below) also works. - -if {$endianness == "big"} { -set vector_register ".uint64 = 0x100000001, v2_float = .0x0, 0x0., v2_int32 = .0x1, 0x1., v4_int16 = .0x0, 0x1, 0x0, 0x1., v8_int8 = .0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1.." -} else { -set vector_register ".uint64 = 0x100000001, v2_float = .0x0, 0x0., v2_int32 = .0x1, 0x1., v4_int16 = .0x1, 0x0, 0x1, 0x0., v8_int8 = .0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0.." -} - -for {set i 0} {$i < 32} {incr i 1} { - gdb_test "info reg ev$i" "ev$i.*$vector_register" "info reg ev$i" -} - -# Test wether the GPRs are updated accordingly. (GPRs are just the lower -# 32 bits of the EV registers.) - -set general_register "0x1\[ \t\]+1" - -for {set i 0} {$i < 32} {incr i 1} { - gdb_test "info reg r$i" "r$i.*$general_register" "info reg r$i" -} - -# Now redo the same tests, but using the print command. -# Note: in LE case, the char array is printed WITHOUT the last character. -# Gdb treats the terminating null char in the array like the terminating -# null char in a string and doesn't print it. This is not a failure, but -# the way gdb works. - -if {$endianness == "big"} { - set decimal_vector ".uint64 = 4294967297, v2_float = .1.*e-45, 1.*e-45., v2_int32 = .1, 1., v4_int16 = .0, 1, 0, 1., v8_int8 = ..0.0.0.001.0.0.0.001.." -} else { - set decimal_vector ".uint64 = 0x0000000100000001, v2_float = .1.*e-45, 1.*e-45., v2_int32 = .1, 1., v4_int16 = .1, 0, 1, 0., v8_int8 = ..001.0.0.0.001.0.0.0.001.0.0.0.001.0.0.." -} - -for {set i 0} {$i < 32} {incr i 1} { - gdb_test "print \$ev$i" ".* = $decimal_vector" "print ev$i" -} - -for {set i 0} {$i < 32} {incr i 1} { - set pattern$i ".*ev$i.*" - append pattern$i $vector_register -} - -send_gdb "info powerpc vector\n" -gdb_expect_list "info powerpc vector" ".*$gdb_prompt $" { -[$pattern0] -[$pattern1] -[$pattern2] -[$pattern3] -[$pattern4] -[$pattern5] -[$pattern6] -[$pattern7] -[$pattern8] -[$pattern9] -[$pattern10] -[$pattern11] -[$pattern12] -[$pattern13] -[$pattern14] -[$pattern15] -[$pattern16] -[$pattern17] -[$pattern18] -[$pattern19] -[$pattern20] -[$pattern21] -[$pattern22] -[$pattern23] -[$pattern24] -[$pattern25] -[$pattern26] -[$pattern27] -[$pattern28] -[$pattern29] -[$pattern30] -[$pattern31] -} - -# We must restart everything, because we have set important registers to -# some unusual values. - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} -if ![runto_main] then { - gdb_suppress_tests -} - -gdb_test "break vector_fun" \ - "Breakpoint 2 at.*e500-regs.c, line \[0-9\]+\\." \ - "Set breakpoint at vector_fun" - -# Actually it is nuch easier to see these results printed in hex. -# gdb_test "set output-radix 16" \ -# "Output radix now set to decimal 16, hex 10, octal 20." \ -# "Set output radix to hex" - -gdb_test "continue" \ - "Breakpoint 2, vector_fun .a=.-2, -2., b=.1, 1.*e500-regs.c.*ev_create_s32 .2, 2.;" \ - "continue to vector_fun" - -# Do a next over the assignment to vector 'a'. -gdb_test "next" ".*b = \\(vector int\\) __ev_create_s32 \\(3, 3\\);" \ - "next (1)" - -# Do a next over the assignment to vector 'b'. -gdb_test "next" "c = __ev_and \\(a, b\\);" \ - "next (2)" - -# Now 'a' should be '0x02020202...' and 'b' should be '0x03030303...' -gdb_test "print/x a" \ - ".*= .0x2, 0x2." \ - "print vector parameter a" - -gdb_test "print/x b" \ - ".*= .0x3, 0x3." \ - "print vector parameter b" - -# If we do an 'up' now, and print 'x' and 'y' we should see the values they -# have in main, not the values they have in vector_fun. -gdb_test "up" ".1.*main \\(\\) at.*e500-regs.c.*z = vector_fun \\(x, y\\);" \ - "up to main" - -gdb_test "print x" \ - ".*= .-2, -2." \ - "print vector x" - -gdb_test "print y" \ - ".*= .1, 1." \ - "print vector y" - -# now go back to vector_func and do a finish, to see if we can print the return -# value correctly. - -gdb_test "down" \ - ".0 vector_fun \\(a=.2, 2., b=.3, 3.\\) at.*e500-regs.c.*c = __ev_and \\(a, b\\);" \ - "down to vector_fun" - -gdb_test "finish" \ - "Run till exit from .0 vector_fun \\(a=.2, 2., b=.3, 3.\\) at.*e500-regs.c.*main \\(\\) at.*e500-regs.c.*z = vector_fun \\(x, y\\);.*Value returned is.*= .2, 2." \ - "finish returned correct value" - - - -- 2.30.2