From ac6235986aa79c093452a085cf94c4c103d8eed5 Mon Sep 17 00:00:00 2001 From: Luke Kenneth Casson Leighton Date: Mon, 28 Feb 2022 17:25:04 +0000 Subject: [PATCH] add icarus simulation of ls2 with DDR3 and ECP5 models --- DDRDLLA.patch | 8 + dram_model/2048Mb_ddr3_parameters.vh | 694 ++++++ dram_model/ddr3.v | 3013 ++++++++++++++++++++++++++ runsimsoc2.sh | 22 + simsoc.ys | 34 + src/simsoctb.v | 162 ++ 6 files changed, 3933 insertions(+) create mode 100644 DDRDLLA.patch create mode 100644 dram_model/2048Mb_ddr3_parameters.vh create mode 100644 dram_model/ddr3.v create mode 100755 runsimsoc2.sh create mode 100644 simsoc.ys create mode 100644 src/simsoctb.v diff --git a/DDRDLLA.patch b/DDRDLLA.patch new file mode 100644 index 0000000..7dea6f9 --- /dev/null +++ b/DDRDLLA.patch @@ -0,0 +1,8 @@ +221c221 +< specify +--- +> /* specify +230c230 +< endspecify +--- +> endspecify */ diff --git a/dram_model/2048Mb_ddr3_parameters.vh b/dram_model/2048Mb_ddr3_parameters.vh new file mode 100644 index 0000000..30515e9 --- /dev/null +++ b/dram_model/2048Mb_ddr3_parameters.vh @@ -0,0 +1,694 @@ +`define x16 +`define sg125 + +/**************************************************************************************** +* +* Disclaimer This software code and all associated documentation, comments or other +* of Warranty: information (collectively "Software") is provided "AS IS" without +* warranty of any kind. MICRON TECHNOLOGY, INC. ("MTI") EXPRESSLY +* DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED +* TO, NONINFRINGEMENT OF THIRD PARTY RIGHTS, AND ANY IMPLIED WARRANTIES +* OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. MTI DOES NOT +* WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE +* OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE. +* FURTHERMORE, MTI DOES NOT MAKE ANY REPRESENTATIONS REGARDING THE USE OR +* THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS, +* ACCURACY, RELIABILITY, OR OTHERWISE. THE ENTIRE RISK ARISING OUT OF USE +* OR PERFORMANCE OF THE SOFTWARE REMAINS WITH YOU. IN NO EVENT SHALL MTI, +* ITS AFFILIATED COMPANIES OR THEIR SUPPLIERS BE LIABLE FOR ANY DIRECT, +* INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES (INCLUDING, +* WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, +* OR LOSS OF INFORMATION) ARISING OUT OF YOUR USE OF OR INABILITY TO USE +* THE SOFTWARE, EVEN IF MTI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +* DAMAGES. Because some jurisdictions prohibit the exclusion or +* limitation of liability for consequential or incidental damages, the +* above limitation may not apply to you. +* +* Copyright 2003 Micron Technology, Inc. All rights reserved. +* +****************************************************************************************/ + + // Timing parameters based on 2Gb_DDR3_SDRAM.pdf - Rev. P 2/12 EN + + // SYMBOL UNITS DESCRIPTION + // ------ ----- ----------- +`ifdef sg093 // sg093 is equivalent to the JEDEC DDR3-2133 (14-14-14) speed bin + parameter TCK_MIN = 938; // tCK ps Minimum Clock Cycle Time + parameter TJIT_PER = 50; // tJIT(per) ps Period JItter + parameter TJIT_CC = 100; // tJIT(cc) ps Cycle to Cycle jitter + parameter TERR_2PER = 74; // tERR(2per) ps Accumulated Error (2-cycle) + parameter TERR_3PER = 87; // tERR(3per) ps Accumulated Error (3-cycle) + parameter TERR_4PER = 97; // tERR(4per) ps Accumulated Error (4-cycle) + parameter TERR_5PER = 105; // tERR(5per) ps Accumulated Error (5-cycle) + parameter TERR_6PER = 111; // tERR(6per) ps Accumulated Error (6-cycle) + parameter TERR_7PER = 116; // tERR(7per) ps Accumulated Error (7-cycle) + parameter TERR_8PER = 121; // tERR(8per) ps Accumulated Error (8-cycle) + parameter TERR_9PER = 125; // tERR(9per) ps Accumulated Error (9-cycle) + parameter TERR_10PER = 128; // tERR(10per)ps Accumulated Error (10-cycle) + parameter TERR_11PER = 132; // tERR(11per)ps Accumulated Error (11-cycle) + parameter TERR_12PER = 134; // tERR(12per)ps Accumulated Error (12-cycle) + parameter TDS = 5; // tDS ps DQ and DM input setup time relative to DQS + parameter TDH = 20; // tDH ps DQ and DM input hold time relative to DQS + parameter TDQSQ = 70; // tDQSQ ps DQS-DQ skew, DQS to last DQ valid, per group, per access + parameter TDQSS = 0.27; // tDQSS tCK Rising clock edge to DQS/DQS# latching transition + parameter TDSS = 0.18; // tDSS tCK DQS falling edge to CLK rising (setup time) + parameter TDSH = 0.18; // tDSH tCK DQS falling edge from CLK rising (hold time) + parameter TDQSCK = 180; // tDQSCK ps DQS output access time from CK/CK# + parameter TQSH = 0.40; // tQSH tCK DQS Output High Pulse Width + parameter TQSL = 0.40; // tQSL tCK DQS Output Low Pulse Width + parameter TDIPW = 280; // tDIPW ps DQ and DM input Pulse Width + parameter TIPW = 470; // tIPW ps Control and Address input Pulse Width + parameter TIS = 35; // tIS ps Input Setup Time + parameter TIH = 75; // tIH ps Input Hold Time + parameter TRAS_MIN = 33000; // tRAS ps Minimum Active to Precharge command time + parameter TRC = 46130; // tRC ps Active to Active/Auto Refresh command time + parameter TRCD = 13090; // tRCD ps Active to Read/Write command time + parameter TRP = 13090; // tRP ps Precharge command period + parameter TXP = 6000; // tXP ps Exit power down to a valid command + parameter TCKE = 5000; // tCKE ps CKE minimum high or low pulse width + parameter TAON = 180; // tAON ps RTT turn-on from ODTLon reference + parameter TWLS = 122; // tWLS ps Setup time for tDQS flop + parameter TWLH = 122; // tWLH ps Hold time of tDQS flop + parameter TWLO = 7500; // tWLO ps Write levelization output delay + parameter TAA_MIN = 13090; // TAA ps Internal READ command to first data + parameter CL_TIME = 13090; // CL ps Minimum CAS Latency +`elsif sg107 // sg107 is equivalent to the JEDEC DDR3-1866 (13-13-13) speed bin + parameter TCK_MIN = 1071; // tCK ps Minimum Clock Cycle Time + parameter TJIT_PER = 60; // tJIT(per) ps Period JItter + parameter TJIT_CC = 120; // tJIT(cc) ps Cycle to Cycle jitter + parameter TERR_2PER = 88; // tERR(2per) ps Accumulated Error (2-cycle) + parameter TERR_3PER = 105; // tERR(3per) ps Accumulated Error (3-cycle) + parameter TERR_4PER = 117; // tERR(4per) ps Accumulated Error (4-cycle) + parameter TERR_5PER = 126; // tERR(5per) ps Accumulated Error (5-cycle) + parameter TERR_6PER = 133; // tERR(6per) ps Accumulated Error (6-cycle) + parameter TERR_7PER = 139; // tERR(7per) ps Accumulated Error (7-cycle) + parameter TERR_8PER = 145; // tERR(8per) ps Accumulated Error (8-cycle) + parameter TERR_9PER = 150; // tERR(9per) ps Accumulated Error (9-cycle) + parameter TERR_10PER = 154; // tERR(10per)ps Accumulated Error (10-cycle) + parameter TERR_11PER = 158; // tERR(11per)ps Accumulated Error (11-cycle) + parameter TERR_12PER = 161; // tERR(12per)ps Accumulated Error (12-cycle) + parameter TDS = 10; // tDS ps DQ and DM input setup time relative to DQS + parameter TDH = 20; // tDH ps DQ and DM input hold time relative to DQS + parameter TDQSQ = 80; // tDQSQ ps DQS-DQ skew, DQS to last DQ valid, per group, per access + parameter TDQSS = 0.27; // tDQSS tCK Rising clock edge to DQS/DQS# latching transition + parameter TDSS = 0.18; // tDSS tCK DQS falling edge to CLK rising (setup time) + parameter TDSH = 0.18; // tDSH tCK DQS falling edge from CLK rising (hold time) + parameter TDQSCK = 200; // tDQSCK ps DQS output access time from CK/CK# + parameter TQSH = 0.40; // tQSH tCK DQS Output High Pulse Width + parameter TQSL = 0.40; // tQSL tCK DQS Output Low Pulse Width + parameter TDIPW = 320; // tDIPW ps DQ and DM input Pulse Width + parameter TIPW = 535; // tIPW ps Control and Address input Pulse Width + parameter TIS = 50; // tIS ps Input Setup Time + parameter TIH = 100; // tIH ps Input Hold Time + parameter TRAS_MIN = 34000; // tRAS ps Minimum Active to Precharge command time + parameter TRC = 48910; // tRC ps Active to Active/Auto Refresh command time + parameter TRCD = 13910; // tRCD ps Active to Read/Write command time + parameter TRP = 13910; // tRP ps Precharge command period + parameter TXP = 6000; // tXP ps Exit power down to a valid command + parameter TCKE = 5000; // tCKE ps CKE minimum high or low pulse width + parameter TAON = 200; // tAON ps RTT turn-on from ODTLon reference + parameter TWLS = 140; // tWLS ps Setup time for tDQS flop + parameter TWLH = 140; // tWLH ps Hold time of tDQS flop + parameter TWLO = 7500; // tWLO ps Write levelization output delay + parameter TAA_MIN = 13910; // TAA ps Internal READ command to first data + parameter CL_TIME = 13910; // CL ps Minimum CAS Latency +`elsif sg125 // sg125 is equivalent to the JEDEC DDR3-1600 (11-11-11) speed bin + parameter TCK_MIN = 1250; // tCK ps Minimum Clock Cycle Time + parameter TJIT_PER = 70; // tJIT(per) ps Period JItter + parameter TJIT_CC = 140; // tJIT(cc) ps Cycle to Cycle jitter + parameter TERR_2PER = 103; // tERR(2per) ps Accumulated Error (2-cycle) + parameter TERR_3PER = 122; // tERR(3per) ps Accumulated Error (3-cycle) + parameter TERR_4PER = 136; // tERR(4per) ps Accumulated Error (4-cycle) + parameter TERR_5PER = 147; // tERR(5per) ps Accumulated Error (5-cycle) + parameter TERR_6PER = 155; // tERR(6per) ps Accumulated Error (6-cycle) + parameter TERR_7PER = 163; // tERR(7per) ps Accumulated Error (7-cycle) + parameter TERR_8PER = 169; // tERR(8per) ps Accumulated Error (8-cycle) + parameter TERR_9PER = 175; // tERR(9per) ps Accumulated Error (9-cycle) + parameter TERR_10PER = 180; // tERR(10per)ps Accumulated Error (10-cycle) + parameter TERR_11PER = 184; // tERR(11per)ps Accumulated Error (11-cycle) + parameter TERR_12PER = 188; // tERR(12per)ps Accumulated Error (12-cycle) + parameter TDS = 10; // tDS ps DQ and DM input setup time relative to DQS + parameter TDH = 45; // tDH ps DQ and DM input hold time relative to DQS + parameter TDQSQ = 100; // tDQSQ ps DQS-DQ skew, DQS to last DQ valid, per group, per access + parameter TDQSS = 0.27; // tDQSS tCK Rising clock edge to DQS/DQS# latching transition + parameter TDSS = 0.18; // tDSS tCK DQS falling edge to CLK rising (setup time) + parameter TDSH = 0.18; // tDSH tCK DQS falling edge from CLK rising (hold time) + parameter TDQSCK = 225; // tDQSCK ps DQS output access time from CK/CK# + parameter TQSH = 0.40; // tQSH tCK DQS Output High Pulse Width + parameter TQSL = 0.40; // tQSL tCK DQS Output Low Pulse Width + parameter TDIPW = 360; // tDIPW ps DQ and DM input Pulse Width + parameter TIPW = 560; // tIPW ps Control and Address input Pulse Width + parameter TIS = 170; // tIS ps Input Setup Time + parameter TIH = 120; // tIH ps Input Hold Time + parameter TRAS_MIN = 35000; // tRAS ps Minimum Active to Precharge command time + parameter TRC = 48750; // tRC ps Active to Active/Auto Refresh command time + parameter TRCD = 13750; // tRCD ps Active to Read/Write command time + parameter TRP = 13750; // tRP ps Precharge command period + parameter TXP = 6000; // tXP ps Exit power down to a valid command + parameter TCKE = 5000; // tCKE ps CKE minimum high or low pulse width + parameter TAON = 250; // tAON ps RTT turn-on from ODTLon reference + parameter TWLS = 165; // tWLS ps Setup time for tDQS flop + parameter TWLH = 165; // tWLH ps Hold time of tDQS flop + parameter TWLO = 7500; // tWLO ps Write levelization output delay + parameter TAA_MIN = 13750; // TAA ps Internal READ command to first data + parameter CL_TIME = 13750; // CL ps Minimum CAS Latency +`elsif sg15E // sg15E is equivalent to the JEDEC DDR3-1333H (9-9-9) speed bin + parameter TCK_MIN = 1500; // tCK ps Minimum Clock Cycle Time + parameter TJIT_PER = 80; // tJIT(per) ps Period JItter + parameter TJIT_CC = 160; // tJIT(cc) ps Cycle to Cycle jitter + parameter TERR_2PER = 118; // tERR(2per) ps Accumulated Error (2-cycle) + parameter TERR_3PER = 140; // tERR(3per) ps Accumulated Error (3-cycle) + parameter TERR_4PER = 155; // tERR(4per) ps Accumulated Error (4-cycle) + parameter TERR_5PER = 168; // tERR(5per) ps Accumulated Error (5-cycle) + parameter TERR_6PER = 177; // tERR(6per) ps Accumulated Error (6-cycle) + parameter TERR_7PER = 186; // tERR(7per) ps Accumulated Error (7-cycle) + parameter TERR_8PER = 193; // tERR(8per) ps Accumulated Error (8-cycle) + parameter TERR_9PER = 200; // tERR(9per) ps Accumulated Error (9-cycle) + parameter TERR_10PER = 205; // tERR(10per)ps Accumulated Error (10-cycle) + parameter TERR_11PER = 210; // tERR(11per)ps Accumulated Error (11-cycle) + parameter TERR_12PER = 215; // tERR(12per)ps Accumulated Error (12-cycle) + parameter TDS = 30; // tDS ps DQ and DM input setup time relative to DQS + parameter TDH = 65; // tDH ps DQ and DM input hold time relative to DQS + parameter TDQSQ = 125; // tDQSQ ps DQS-DQ skew, DQS to last DQ valid, per group, per access + parameter TDQSS = 0.25; // tDQSS tCK Rising clock edge to DQS/DQS# latching transition + parameter TDSS = 0.20; // tDSS tCK DQS falling edge to CLK rising (setup time) + parameter TDSH = 0.20; // tDSH tCK DQS falling edge from CLK rising (hold time) + parameter TDQSCK = 255; // tDQSCK ps DQS output access time from CK/CK# + parameter TQSH = 0.40; // tQSH tCK DQS Output High Pulse Width + parameter TQSL = 0.40; // tQSL tCK DQS Output Low Pulse Width + parameter TDIPW = 400; // tDIPW ps DQ and DM input Pulse Width + parameter TIPW = 620; // tIPW ps Control and Address input Pulse Width + parameter TIS = 190; // tIS ps Input Setup Time + parameter TIH = 140; // tIH ps Input Hold Time + parameter TRAS_MIN = 36000; // tRAS ps Minimum Active to Precharge command time + parameter TRC = 49500; // tRC ps Active to Active/Auto Refresh command time + parameter TRCD = 13500; // tRCD ps Active to Read/Write command time + parameter TRP = 13500; // tRP ps Precharge command period + parameter TXP = 6000; // tXP ps Exit power down to a valid command + parameter TCKE = 5625; // tCKE ps CKE minimum high or low pulse width + parameter TAON = 250; // tAON ps RTT turn-on from ODTLon reference + parameter TWLS = 195; // tWLS ps Setup time for tDQS flop + parameter TWLH = 195; // tWLH ps Hold time of tDQS flop + parameter TWLO = 9000; // tWLO ps Write levelization output delay + parameter TAA_MIN = 13500; // TAA ps Internal READ command to first data + parameter CL_TIME = 13500; // CL ps Minimum CAS Latency +`elsif sg15 // sg15 is equivalent to the JEDEC DDR3-1333J (10-10-10) speed bin + parameter TCK_MIN = 1500; // tCK ps Minimum Clock Cycle Time + parameter TJIT_PER = 80; // tJIT(per) ps Period JItter + parameter TJIT_CC = 160; // tJIT(cc) ps Cycle to Cycle jitter + parameter TERR_2PER = 118; // tERR(2per) ps Accumulated Error (2-cycle) + parameter TERR_3PER = 140; // tERR(3per) ps Accumulated Error (3-cycle) + parameter TERR_4PER = 155; // tERR(4per) ps Accumulated Error (4-cycle) + parameter TERR_5PER = 168; // tERR(5per) ps Accumulated Error (5-cycle) + parameter TERR_6PER = 177; // tERR(6per) ps Accumulated Error (6-cycle) + parameter TERR_7PER = 186; // tERR(7per) ps Accumulated Error (7-cycle) + parameter TERR_8PER = 193; // tERR(8per) ps Accumulated Error (8-cycle) + parameter TERR_9PER = 200; // tERR(9per) ps Accumulated Error (9-cycle) + parameter TERR_10PER = 205; // tERR(10per)ps Accumulated Error (10-cycle) + parameter TERR_11PER = 210; // tERR(11per)ps Accumulated Error (11-cycle) + parameter TERR_12PER = 215; // tERR(12per)ps Accumulated Error (12-cycle) + parameter TDS = 30; // tDS ps DQ and DM input setup time relative to DQS + parameter TDH = 65; // tDH ps DQ and DM input hold time relative to DQS + parameter TDQSQ = 125; // tDQSQ ps DQS-DQ skew, DQS to last DQ valid, per group, per access + parameter TDQSS = 0.25; // tDQSS tCK Rising clock edge to DQS/DQS# latching transition + parameter TDSS = 0.20; // tDSS tCK DQS falling edge to CLK rising (setup time) + parameter TDSH = 0.20; // tDSH tCK DQS falling edge from CLK rising (hold time) + parameter TDQSCK = 255; // tDQSCK ps DQS output access time from CK/CK# + parameter TQSH = 0.40; // tQSH tCK DQS Output High Pulse Width + parameter TQSL = 0.40; // tQSL tCK DQS Output Low Pulse Width + parameter TDIPW = 400; // tDIPW ps DQ and DM input Pulse Width + parameter TIPW = 620; // tIPW ps Control and Address input Pulse Width + parameter TIS = 190; // tIS ps Input Setup Time + parameter TIH = 140; // tIH ps Input Hold Time + parameter TRAS_MIN = 36000; // tRAS ps Minimum Active to Precharge command time + parameter TRC = 51000; // tRC ps Active to Active/Auto Refresh command time + parameter TRCD = 15000; // tRCD ps Active to Read/Write command time + parameter TRP = 15000; // tRP ps Precharge command period + parameter TXP = 6000; // tXP ps Exit power down to a valid command + parameter TCKE = 5625; // tCKE ps CKE minimum high or low pulse width + parameter TAON = 250; // tAON ps RTT turn-on from ODTLon reference + parameter TWLS = 195; // tWLS ps Setup time for tDQS flop + parameter TWLH = 195; // tWLH ps Hold time of tDQS flop + parameter TWLO = 9000; // tWLO ps Write levelization output delay + parameter TAA_MIN = 15000; // TAA ps Internal READ command to first data + parameter CL_TIME = 15000; // CL ps Minimum CAS Latency +`elsif sg187E // sg187E is equivalent to the JEDEC DDR3-1066F (7-7-7) speed bin + parameter TCK_MIN = 1875; // tCK ps Minimum Clock Cycle Time + parameter TJIT_PER = 90; // tJIT(per) ps Period JItter + parameter TJIT_CC = 180; // tJIT(cc) ps Cycle to Cycle jitter + parameter TERR_2PER = 132; // tERR(2per) ps Accumulated Error (2-cycle) + parameter TERR_3PER = 157; // tERR(3per) ps Accumulated Error (3-cycle) + parameter TERR_4PER = 175; // tERR(4per) ps Accumulated Error (4-cycle) + parameter TERR_5PER = 188; // tERR(5per) ps Accumulated Error (5-cycle) + parameter TERR_6PER = 200; // tERR(6per) ps Accumulated Error (6-cycle) + parameter TERR_7PER = 209; // tERR(7per) ps Accumulated Error (7-cycle) + parameter TERR_8PER = 217; // tERR(8per) ps Accumulated Error (8-cycle) + parameter TERR_9PER = 224; // tERR(9per) ps Accumulated Error (9-cycle) + parameter TERR_10PER = 231; // tERR(10per)ps Accumulated Error (10-cycle) + parameter TERR_11PER = 237; // tERR(11per)ps Accumulated Error (11-cycle) + parameter TERR_12PER = 242; // tERR(12per)ps Accumulated Error (12-cycle) + parameter TDS = 75; // tDS ps DQ and DM input setup time relative to DQS + parameter TDH = 100; // tDH ps DQ and DM input hold time relative to DQS + parameter TDQSQ = 150; // tDQSQ ps DQS-DQ skew, DQS to last DQ valid, per group, per access + parameter TDQSS = 0.25; // tDQSS tCK Rising clock edge to DQS/DQS# latching transition + parameter TDSS = 0.20; // tDSS tCK DQS falling edge to CLK rising (setup time) + parameter TDSH = 0.20; // tDSH tCK DQS falling edge from CLK rising (hold time) + parameter TDQSCK = 300; // tDQSCK ps DQS output access time from CK/CK# + parameter TQSH = 0.38; // tQSH tCK DQS Output High Pulse Width + parameter TQSL = 0.38; // tQSL tCK DQS Output Low Pulse Width + parameter TDIPW = 490; // tDIPW ps DQ and DM input Pulse Width + parameter TIPW = 780; // tIPW ps Control and Address input Pulse Width + parameter TIS = 275; // tIS ps Input Setup Time + parameter TIH = 200; // tIH ps Input Hold Time + parameter TRAS_MIN = 37500; // tRAS ps Minimum Active to Precharge command time + parameter TRC = 50625; // tRC ps Active to Active/Auto Refresh command time + parameter TRCD = 13125; // tRCD ps Active to Read/Write command time + parameter TRP = 13125; // tRP ps Precharge command period + parameter TXP = 7500; // tXP ps Exit power down to a valid command + parameter TCKE = 5625; // tCKE ps CKE minimum high or low pulse width + parameter TAON = 300; // tAON ps RTT turn-on from ODTLon reference + parameter TWLS = 245; // tWLS ps Setup time for tDQS flop + parameter TWLH = 245; // tWLH ps Hold time of tDQS flop + parameter TWLO = 9000; // tWLO ps Write levelization output delay + parameter TAA_MIN = 13125; // TAA ps Internal READ command to first data + parameter CL_TIME = 13125; // CL ps Minimum CAS Latency +`elsif sg187 // sg187 is equivalent to the JEDEC DDR3-1066G (8-8-8) speed bin + parameter TCK_MIN = 1875; // tCK ps Minimum Clock Cycle Time + parameter TJIT_PER = 90; // tJIT(per) ps Period JItter + parameter TJIT_CC = 180; // tJIT(cc) ps Cycle to Cycle jitter + parameter TERR_2PER = 132; // tERR(2per) ps Accumulated Error (2-cycle) + parameter TERR_3PER = 157; // tERR(3per) ps Accumulated Error (3-cycle) + parameter TERR_4PER = 175; // tERR(4per) ps Accumulated Error (4-cycle) + parameter TERR_5PER = 188; // tERR(5per) ps Accumulated Error (5-cycle) + parameter TERR_6PER = 200; // tERR(6per) ps Accumulated Error (6-cycle) + parameter TERR_7PER = 209; // tERR(7per) ps Accumulated Error (7-cycle) + parameter TERR_8PER = 217; // tERR(8per) ps Accumulated Error (8-cycle) + parameter TERR_9PER = 224; // tERR(9per) ps Accumulated Error (9-cycle) + parameter TERR_10PER = 231; // tERR(10per)ps Accumulated Error (10-cycle) + parameter TERR_11PER = 237; // tERR(11per)ps Accumulated Error (11-cycle) + parameter TERR_12PER = 242; // tERR(12per)ps Accumulated Error (12-cycle) + parameter TDS = 75; // tDS ps DQ and DM input setup time relative to DQS + parameter TDH = 100; // tDH ps DQ and DM input hold time relative to DQS + parameter TDQSQ = 150; // tDQSQ ps DQS-DQ skew, DQS to last DQ valid, per group, per access + parameter TDQSS = 0.25; // tDQSS tCK Rising clock edge to DQS/DQS# latching transition + parameter TDSS = 0.20; // tDSS tCK DQS falling edge to CLK rising (setup time) + parameter TDSH = 0.20; // tDSH tCK DQS falling edge from CLK rising (hold time) + parameter TDQSCK = 300; // tDQSCK ps DQS output access time from CK/CK# + parameter TQSH = 0.38; // tQSH tCK DQS Output High Pulse Width + parameter TQSL = 0.38; // tQSL tCK DQS Output Low Pulse Width + parameter TDIPW = 490; // tDIPW ps DQ and DM input Pulse Width + parameter TIPW = 780; // tIPW ps Control and Address input Pulse Width + parameter TIS = 275; // tIS ps Input Setup Time + parameter TIH = 200; // tIH ps Input Hold Time + parameter TRAS_MIN = 37500; // tRAS ps Minimum Active to Precharge command time + parameter TRC = 52500; // tRC ps Active to Active/Auto Refresh command time + parameter TRCD = 15000; // tRCD ps Active to Read/Write command time + parameter TRP = 15000; // tRP ps Precharge command period + parameter TXP = 7500; // tXP ps Exit power down to a valid command + parameter TCKE = 5625; // tCKE ps CKE minimum high or low pulse width + parameter TAON = 300; // tAON ps RTT turn-on from ODTLon reference + parameter TWLS = 245; // tWLS ps Setup time for tDQS flop + parameter TWLH = 245; // tWLH ps Hold time of tDQS flop + parameter TWLO = 9000; // tWLO ps Write levelization output delay + parameter TAA_MIN = 15000; // TAA ps Internal READ command to first data + parameter CL_TIME = 15000; // CL ps Minimum CAS Latency +`elsif sg25E // sg25E is equivalent to the JEDEC DDR3-800D (5-5-5) speed bin + parameter TCK_MIN = 2500; // tCK ps Minimum Clock Cycle Time + parameter TJIT_PER = 100; // tJIT(per) ps Period JItter + parameter TJIT_CC = 200; // tJIT(cc) ps Cycle to Cycle jitter + parameter TERR_2PER = 147; // tERR(2per) ps Accumulated Error (2-cycle) + parameter TERR_3PER = 175; // tERR(3per) ps Accumulated Error (3-cycle) + parameter TERR_4PER = 194; // tERR(4per) ps Accumulated Error (4-cycle) + parameter TERR_5PER = 209; // tERR(5per) ps Accumulated Error (5-cycle) + parameter TERR_6PER = 222; // tERR(6per) ps Accumulated Error (6-cycle) + parameter TERR_7PER = 232; // tERR(7per) ps Accumulated Error (7-cycle) + parameter TERR_8PER = 241; // tERR(8per) ps Accumulated Error (8-cycle) + parameter TERR_9PER = 249; // tERR(9per) ps Accumulated Error (9-cycle) + parameter TERR_10PER = 257; // tERR(10per)ps Accumulated Error (10-cycle) + parameter TERR_11PER = 263; // tERR(11per)ps Accumulated Error (11-cycle) + parameter TERR_12PER = 269; // tERR(12per)ps Accumulated Error (12-cycle) + parameter TDS = 125; // tDS ps DQ and DM input setup time relative to DQS + parameter TDH = 150; // tDH ps DQ and DM input hold time relative to DQS + parameter TDQSQ = 200; // tDQSQ ps DQS-DQ skew, DQS to last DQ valid, per group, per access + parameter TDQSS = 0.25; // tDQSS tCK Rising clock edge to DQS/DQS# latching transition + parameter TDSS = 0.20; // tDSS tCK DQS falling edge to CLK rising (setup time) + parameter TDSH = 0.20; // tDSH tCK DQS falling edge from CLK rising (hold time) + parameter TDQSCK = 400; // tDQSCK ps DQS output access time from CK/CK# + parameter TQSH = 0.38; // tQSH tCK DQS Output High Pulse Width + parameter TQSL = 0.38; // tQSL tCK DQS Output Low Pulse Width + parameter TDIPW = 600; // tDIPW ps DQ and DM input Pulse Width + parameter TIPW = 900; // tIPW ps Control and Address input Pulse Width + parameter TIS = 350; // tIS ps Input Setup Time + parameter TIH = 275; // tIH ps Input Hold Time + parameter TRAS_MIN = 37500; // tRAS ps Minimum Active to Precharge command time + parameter TRC = 50000; // tRC ps Active to Active/Auto Refresh command time + parameter TRCD = 12500; // tRCD ps Active to Read/Write command time + parameter TRP = 12500; // tRP ps Precharge command period + parameter TXP = 7500; // tXP ps Exit power down to a valid command + parameter TCKE = 7500; // tCKE ps CKE minimum high or low pulse width + parameter TAON = 400; // tAON ps RTT turn-on from ODTLon reference + parameter TWLS = 325; // tWLS ps Setup time for tDQS flop + parameter TWLH = 325; // tWLH ps Hold time of tDQS flop + parameter TWLO = 9000; // tWLO ps Write levelization output delay + parameter TAA_MIN = 12500; // TAA ps Internal READ command to first data + parameter CL_TIME = 12500; // CL ps Minimum CAS Latency +`else + `define sg25 // sg25 is equivalent to the JEDEC DDR3-800E (6-6-6) speed bin + parameter TCK_MIN = 2500; // tCK ps Minimum Clock Cycle Time + parameter TJIT_PER = 100; // tJIT(per) ps Period JItter + parameter TJIT_CC = 200; // tJIT(cc) ps Cycle to Cycle jitter + parameter TERR_2PER = 147; // tERR(2per) ps Accumulated Error (2-cycle) + parameter TERR_3PER = 175; // tERR(3per) ps Accumulated Error (3-cycle) + parameter TERR_4PER = 194; // tERR(4per) ps Accumulated Error (4-cycle) + parameter TERR_5PER = 209; // tERR(5per) ps Accumulated Error (5-cycle) + parameter TERR_6PER = 222; // tERR(6per) ps Accumulated Error (6-cycle) + parameter TERR_7PER = 232; // tERR(7per) ps Accumulated Error (7-cycle) + parameter TERR_8PER = 241; // tERR(8per) ps Accumulated Error (8-cycle) + parameter TERR_9PER = 249; // tERR(9per) ps Accumulated Error (9-cycle) + parameter TERR_10PER = 257; // tERR(10per)ps Accumulated Error (10-cycle) + parameter TERR_11PER = 263; // tERR(11per)ps Accumulated Error (11-cycle) + parameter TERR_12PER = 269; // tERR(12per)ps Accumulated Error (12-cycle) + parameter TDS = 125; // tDS ps DQ and DM input setup time relative to DQS + parameter TDH = 150; // tDH ps DQ and DM input hold time relative to DQS + parameter TDQSQ = 200; // tDQSQ ps DQS-DQ skew, DQS to last DQ valid, per group, per access + parameter TDQSS = 0.25; // tDQSS tCK Rising clock edge to DQS/DQS# latching transition + parameter TDSS = 0.20; // tDSS tCK DQS falling edge to CLK rising (setup time) + parameter TDSH = 0.20; // tDSH tCK DQS falling edge from CLK rising (hold time) + parameter TDQSCK = 400; // tDQSCK ps DQS output access time from CK/CK# + parameter TQSH = 0.38; // tQSH tCK DQS Output High Pulse Width + parameter TQSL = 0.38; // tQSL tCK DQS Output Low Pulse Width + parameter TDIPW = 600; // tDIPW ps DQ and DM input Pulse Width + parameter TIPW = 900; // tIPW ps Control and Address input Pulse Width + parameter TIS = 350; // tIS ps Input Setup Time + parameter TIH = 275; // tIH ps Input Hold Time + parameter TRAS_MIN = 37500; // tRAS ps Minimum Active to Precharge command time + parameter TRC = 52500; // tRC ps Active to Active/Auto Refresh command time + parameter TRCD = 15000; // tRCD ps Active to Read/Write command time + parameter TRP = 15000; // tRP ps Precharge command period + parameter TXP = 7500; // tXP ps Exit power down to a valid command + parameter TCKE = 7500; // tCKE ps CKE minimum high or low pulse width + parameter TAON = 400; // tAON ps RTT turn-on from ODTLon reference + parameter TWLS = 325; // tWLS ps Setup time for tDQS flop + parameter TWLH = 325; // tWLH ps Hold time of tDQS flop + parameter TWLO = 9000; // tWLO ps Write levelization output delay + parameter TAA_MIN = 15000; // TAA ps Internal READ command to first data + parameter CL_TIME = 15000; // CL ps Minimum CAS Latency +`endif + + parameter TDQSCK_DLLDIS = TDQSCK; // tDQSCK ps for DLLDIS mode, timing not guaranteed + +`ifdef x16 + `ifdef sg093 + parameter TRRD = 6000; // tRRD ps (2KB page size) Active bank a to Active bank b command time + parameter TFAW = 35000; // tFAW ps (2KB page size) Four Bank Activate window + `elsif sg107 + parameter TRRD = 6000; // tRRD ps (2KB page size) Active bank a to Active bank b command time + parameter TFAW = 35000; // tFAW ps (2KB page size) Four Bank Activate window + `elsif sg125 + parameter TRRD = 7500; // tRRD ps (2KB page size) Active bank a to Active bank b command time + parameter TFAW = 40000; // tFAW ps (2KB page size) Four Bank Activate window + `elsif sg15E + parameter TRRD = 7500; // tRRD ps (2KB page size) Active bank a to Active bank b command time + parameter TFAW = 45000; // tFAW ps (2KB page size) Four Bank Activate window + `elsif sg15 + parameter TRRD = 7500; // tRRD ps (2KB page size) Active bank a to Active bank b command time + parameter TFAW = 45000; // tFAW ps (2KB page size) Four Bank Activate window + `else // sg187E, sg187, sg25, sg25E + parameter TRRD = 10000; // tRRD ps (2KB page size) Active bank a to Active bank b command time + parameter TFAW = 50000; // tFAW ps (2KB page size) Four Bank Activate window + `endif +`else // x4, x8 + `ifdef sg093 + parameter TRRD = 5000; // tRRD ps (1KB page size) Active bank a to Active bank b command time + parameter TFAW = 25000; // tFAW ps (1KB page size) Four Bank Activate window + `elsif sg107 + parameter TRRD = 5000; // tRRD ps (1KB page size) Active bank a to Active bank b command time + parameter TFAW = 25000; // tFAW ps (1KB page size) Four Bank Activate window + `elsif sg125 + parameter TRRD = 6000; // tRRD ps (1KB page size) Active bank a to Active bank b command time + parameter TFAW = 30000; // tFAW ps (1KB page size) Four Bank Activate window + `elsif sg15E + parameter TRRD = 6000; // tRRD ps (1KB page size) Active bank a to Active bank b command time + parameter TFAW = 30000; // tFAW ps (1KB page size) Four Bank Activate window + `elsif sg15 + parameter TRRD = 6000; // tRRD ps (1KB page size) Active bank a to Active bank b command time + parameter TFAW = 30000; // tFAW ps (1KB page size) Four Bank Activate window + `elsif sg187E + parameter TRRD = 7500; // tRRD ps (1KB page size) Active bank a to Active bank b command time + parameter TFAW = 37500; // tFAW ps (1KB page size) Four Bank Activate window + `elsif sg187 + parameter TRRD = 7500; // tRRD ps (1KB page size) Active bank a to Active bank b command time + parameter TFAW = 37500; // tFAW ps (1KB page size) Four Bank Activate window + `else // sg25, sg25E + parameter TRRD = 10000; // tRRD ps (1KB page size) Active bank a to Active bank b command time + parameter TFAW = 40000; // tFAW ps (1KB page size) Four Bank Activate window + `endif +`endif + + // Timing Parameters + + // Mode Register + parameter CL_MIN = 5; // CL tCK Minimum CAS Latency + parameter CL_MAX = 14; // CL tCK Maximum CAS Latency + parameter AL_MIN = 0; // AL tCK Minimum Additive Latency + parameter AL_MAX = 2; // AL tCK Maximum Additive Latency + parameter WR_MIN = 5; // WR tCK Minimum Write Recovery + parameter WR_MAX = 16; // WR tCK Maximum Write Recovery + parameter BL_MIN = 4; // BL tCK Minimum Burst Length + parameter BL_MAX = 8; // BL tCK Minimum Burst Length + parameter CWL_MIN = 5; // CWL tCK Minimum CAS Write Latency + parameter CWL_MAX = 10; // CWL tCK Maximum CAS Write Latency + + // Clock + parameter TCK_MAX = 3300; // tCK ps Maximum Clock Cycle Time + parameter TCH_AVG_MIN = 0.47; // tCH tCK Minimum Clock High-Level Pulse Width + parameter TCL_AVG_MIN = 0.47; // tCL tCK Minimum Clock Low-Level Pulse Width + parameter TCH_AVG_MAX = 0.53; // tCH tCK Maximum Clock High-Level Pulse Width + parameter TCL_AVG_MAX = 0.53; // tCL tCK Maximum Clock Low-Level Pulse Width + parameter TCH_ABS_MIN = 0.43; // tCH tCK Minimum Clock High-Level Pulse Width + parameter TCL_ABS_MIN = 0.43; // tCL tCK Maximum Clock Low-Level Pulse Width + parameter TCKE_TCK = 3; // tCKE tCK CKE minimum high or low pulse width + parameter TAA_MAX = 20000; // TAA ps Internal READ command to first data + + // Data OUT + parameter TQH = 0.38; // tQH ps DQ output hold time from DQS, DQS# + // Data Strobe OUT + parameter TRPRE = 0.90; // tRPRE tCK DQS Read Preamble + parameter TRPST = 0.30; // tRPST tCK DQS Read Postamble + // Data Strobe IN + parameter TDQSH = 0.45; // tDQSH tCK DQS input High Pulse Width + parameter TDQSL = 0.45; // tDQSL tCK DQS input Low Pulse Width + parameter TWPRE = 0.90; // tWPRE tCK DQS Write Preamble + parameter TWPST = 0.30; // tWPST tCK DQS Write Postamble + // Command and Address + integer TZQCS = max( 64, ceil( 80000/TCK_MIN)); // tZQCS tCK ZQ Cal (Short) time + integer TZQINIT = max(512, ceil(640000/TCK_MIN)); // tZQinit tCK ZQ Cal (Long) time + integer TZQOPER = max(256, ceil(320000/TCK_MIN)); // tZQoper tCK ZQ Cal (Long) time + parameter TCCD = 4; // tCCD tCK Cas to Cas command delay + parameter TCCD_DG = 2; // tCCD_DG tCK Cas to Cas command delay to different group + parameter TRAS_MAX = 60e9; // tRAS ps Maximum Active to Precharge command time + parameter TWR = 15000; // tWR ps Write recovery time + parameter TMRD = 4; // tMRD tCK Load Mode Register command cycle time + parameter TMOD = 15000; // tMOD ps LOAD MODE to non-LOAD MODE command cycle time + parameter TMOD_TCK = 12; // tMOD tCK LOAD MODE to non-LOAD MODE command cycle time + parameter TRRD_TCK = 4; // tRRD tCK Active bank a to Active bank b command time + parameter TRRD_DG = 3000; // tRRD_DG ps Active bank a to Active bank b command time to different group + parameter TRRD_DG_TCK = 2; // tRRD_DG tCK Active bank a to Active bank b command time to different group + parameter TRTP = 7500; // tRTP ps Read to Precharge command delay + parameter TRTP_TCK = 4; // tRTP tCK Read to Precharge command delay + parameter TWTR = 7500; // tWTR ps Write to Read command delay + parameter TWTR_DG = 3750; // tWTR_DG ps Write to Read command delay to different group + parameter TWTR_TCK = 4; // tWTR tCK Write to Read command delay + parameter TWTR_DG_TCK = 2; // tWTR_DG tCK Write to Read command delay to different group + parameter TDLLK = 512; // tDLLK tCK DLL locking time + // Refresh - 2Gb + parameter TRFC_MIN = 160000; // tRFC ps Refresh to Refresh Command interval minimum value + parameter TRFC_MAX =70200000; // tRFC ps Refresh to Refresh Command Interval maximum value + // Power Down + parameter TXP_TCK = 3; // tXP tCK Exit power down to a valid command + parameter TXPDLL = 24000; // tXPDLL ps Exit precharge power down to READ or WRITE command (DLL-off mode) + parameter TXPDLL_TCK = 10; // tXPDLL tCK Exit precharge power down to READ or WRITE command (DLL-off mode) + parameter TACTPDEN = 1; // tACTPDEN tCK Timing of last ACT command to power down entry + parameter TPRPDEN = 1; // tPREPDEN tCK Timing of last PRE command to power down entry + parameter TREFPDEN = 1; // tARPDEN tCK Timing of last REFRESH command to power down entry + parameter TCPDED = 1; // tCPDED tCK Command pass disable/enable delay + parameter TPD_MAX =TRFC_MAX; // tPD ps Power-down entry-to-exit timing + parameter TXPR = 170000; // tXPR ps Exit Reset from CKE assertion to a valid command + parameter TXPR_TCK = 5; // tXPR tCK Exit Reset from CKE assertion to a valid command + // Self Refresh + parameter TXS = 170000; // tXS ps Exit self refesh to a non-read or write command + parameter TXS_TCK = 5; // tXS tCK Exit self refesh to a non-read or write command + parameter TXSDLL = TDLLK; // tXSRD tCK Exit self refresh to a read or write command + parameter TISXR = TIS; // tISXR ps CKE setup time during self refresh exit. + parameter TCKSRE = 10000; // tCKSRE ps Valid Clock requirement after self refresh entry (SRE) + parameter TCKSRE_TCK = 5; // tCKSRE tCK Valid Clock requirement after self refresh entry (SRE) + parameter TCKSRX = 10000; // tCKSRX ps Valid Clock requirement prior to self refresh exit (SRX) + parameter TCKSRX_TCK = 5; // tCKSRX tCK Valid Clock requirement prior to self refresh exit (SRX) + parameter TCKESR_TCK = 4; // tCKESR tCK Minimum CKE low width for Self Refresh entry to exit timing + // ODT + parameter TAOF = 0.7; // tAOF tCK RTT turn-off from ODTLoff reference + parameter TAONPD = 8500; // tAONPD ps Asynchronous RTT turn-on delay (Power-Down with DLL frozen) + parameter TAOFPD = 8500; // tAONPD ps Asynchronous RTT turn-off delay (Power-Down with DLL frozen) + parameter ODTH4 = 4; // ODTH4 tCK ODT minimum HIGH time after ODT assertion or write (BL4) + parameter ODTH8 = 6; // ODTH8 tCK ODT minimum HIGH time after write (BL8) + parameter TADC = 0.7; // tADC tCK RTT dynamic change skew + // Write Levelization + parameter TWLMRD = 40; // tWLMRD tCK First DQS pulse rising edge after tDQSS margining mode is programmed + parameter TWLDQSEN = 25; // tWLDQSEN tCK DQS/DQS delay after tDQSS margining mode is programmed + parameter TWLOE = 2000; // tWLOE ps Write levelization output error + + // Size Parameters based on Part Width + +`ifdef x4 + parameter DM_BITS = 1; // Set this parameter to control how many Data Mask bits are used + parameter ADDR_BITS = 15; // MAX Address Bits + parameter ROW_BITS = 15; // Set this parameter to control how many Address bits are used + parameter COL_BITS = 11; // Set this parameter to control how many Column bits are used + parameter DQ_BITS = 4; // Set this parameter to control how many Data bits are used **Same as part bit width** + parameter DQS_BITS = 1; // Set this parameter to control how many Dqs bits are used +`elsif x8 + parameter DM_BITS = 1; // Set this parameter to control how many Data Mask bits are used + parameter ADDR_BITS = 15; // MAX Address Bits + parameter ROW_BITS = 15; // Set this parameter to control how many Address bits are used + parameter COL_BITS = 10; // Set this parameter to control how many Column bits are used + parameter DQ_BITS = 8; // Set this parameter to control how many Data bits are used **Same as part bit width** + parameter DQS_BITS = 1; // Set this parameter to control how many Dqs bits are used +`else + `define x16 + parameter DM_BITS = 2; // Set this parameter to control how many Data Mask bits are used + parameter ADDR_BITS = 14; // MAX Address Bits + parameter ROW_BITS = 14; // Set this parameter to control how many Address bits are used + parameter COL_BITS = 10; // Set this parameter to control how many Column bits are used + parameter DQ_BITS = 16; // Set this parameter to control how many Data bits are used **Same as part bit width** + parameter DQS_BITS = 2; // Set this parameter to control how many Dqs bits are used +`endif + + // Size Parameters + parameter BA_BITS = 3; // Set this parmaeter to control how many Bank Address bits are used + parameter MEM_BITS = 10; // Set this parameter to control how many write data bursts can be stored in memory. The default is 2^10=1024. + parameter AP = 10; // the address bit that controls auto-precharge and precharge-all + parameter BC = 12; // the address bit that controls burst chop + parameter BL_BITS = 3; // the number of bits required to count to BL_MAX + parameter BO_BITS = 2; // the number of Burst Order Bits + +`ifdef QUAD_RANK + parameter CS_BITS = 4; // Number of Chip Select Bits + parameter RANKS = 4; // Number of Chip Selects +`elsif DUAL_RANK + parameter CS_BITS = 2; // Number of Chip Select Bits + parameter RANKS = 2; // Number of Chip Selects +`else + parameter CS_BITS = 1; // Number of Chip Select Bits + parameter RANKS = 1; // Number of Chip Selects +`endif + + // Simulation parameters + parameter RZQ = 240; // termination resistance + parameter PRE_DEF_PAT = 8'hAA; // value returned during mpr pre-defined pattern readout + parameter STOP_ON_ERROR = 1; // If set to 1, the model will halt on command sequence/major errors + parameter DEBUG = 1; // Turn on Debug messages + parameter BUS_DELAY = 0; // delay in nanoseconds + parameter RANDOM_OUT_DELAY = 0; // If set to 1, the model will put a random amount of delay on DQ/DQS during reads + parameter RANDOM_SEED = 31913; //seed value for random generator. + + parameter RDQSEN_PRE = 2; // DQS driving time prior to first read strobe + parameter RDQSEN_PST = 1; // DQS driving time after last read strobe + parameter RDQS_PRE = 2; // DQS low time prior to first read strobe + parameter RDQS_PST = 1; // DQS low time after last read strobe + parameter RDQEN_PRE = 0; // DQ/DM driving time prior to first read data + parameter RDQEN_PST = 0; // DQ/DM driving time after last read data + parameter WDQS_PRE = 2; // DQS half clock periods prior to first write strobe + parameter WDQS_PST = 1; // DQS half clock periods after last write strobe + +// check for legal cas latency based on the cas write latency +function valid_cl; + input [3:0] cl; + input [3:0] cwl; + + case ({cwl, cl}) +`ifdef sg093 + {4'd5 , 4'd5 }, + {4'd5 , 4'd6 }, + {4'd6 , 4'd7 }, + {4'd6 , 4'd8 }, + {4'd7 , 4'd9 }, + {4'd7 , 4'd10}, + {4'd8 , 4'd11}, + {4'd9 , 4'd13}, + {4'd10, 4'd14}: valid_cl = 1; +`elsif sg107 + {4'd5, 4'd5 }, + {4'd5, 4'd6 }, + {4'd6, 4'd7 }, + {4'd6, 4'd8 }, + {4'd7, 4'd9 }, + {4'd7, 4'd10}, + {4'd8, 4'd11}, + {4'd9, 4'd13}: valid_cl = 1; +`elsif sg125 + {4'd5, 4'd5 }, + {4'd5, 4'd6 }, + {4'd6, 4'd7 }, + {4'd6, 4'd8 }, + {4'd7, 4'd9 }, + {4'd7, 4'd10}, + {4'd8, 4'd11}: valid_cl = 1; +`elsif sg15E + {4'd5, 4'd5 }, + {4'd5, 4'd6 }, + {4'd6, 4'd7 }, + {4'd6, 4'd8 }, + {4'd7, 4'd9 }, + {4'd7, 4'd10}: valid_cl = 1; +`elsif sg15 + {4'd5, 4'd5 }, + {4'd5, 4'd6 }, + {4'd6, 4'd8 }, + {4'd7, 4'd10}: valid_cl = 1; +`elsif sg187E + {4'd5, 4'd5 }, + {4'd5, 4'd6 }, + {4'd6, 4'd7 }, + {4'd6, 4'd8 }: valid_cl = 1; +`elsif sg187 + {4'd5, 4'd5 }, + {4'd5, 4'd6 }, + {4'd6, 4'd8 }: valid_cl = 1; +`elsif sg25E + {4'd5, 4'd5 }, + {4'd5, 4'd6 }: valid_cl = 1; +`elsif sg25 + {4'd5, 4'd5 }, + {4'd5, 4'd6 }: valid_cl = 1; +`endif + default : valid_cl = 0; + endcase +endfunction + +// find the minimum valid cas write latency +function [3:0] min_cwl; + input period; + real period; + min_cwl = (period >= 2500.0) ? 5: + (period >= 1875.0) ? 6: + (period >= 1500.0) ? 7: + (period >= 1250.0) ? 8: + (period >= 1071.0) ? 9: + 10; // (period >= 938) +endfunction + +// find the minimum valid cas latency +function [3:0] min_cl; + input period; + real period; + reg [3:0] cwl; + reg [3:0] cl; + begin + cwl = min_cwl(period); + for (cl=CL_MAX; cl>=CL_MIN; cl=cl-1) begin + if (valid_cl(cl, cwl)) begin + min_cl = cl; + end + end + end +endfunction diff --git a/dram_model/ddr3.v b/dram_model/ddr3.v new file mode 100644 index 0000000..06566f5 --- /dev/null +++ b/dram_model/ddr3.v @@ -0,0 +1,3013 @@ +`define MAX_MEM +`define mem_init + +/**************************************************************************************** +* +* File Name: ddr3.v +* Version: 1.70 +* Model: BUS Functional +* +* Dependencies: ddr3_parameters.vh +* +* Description: Micron SDRAM DDR3 (Double Data Rate 3) +* +* Limitation: - doesn't check for average refresh timings +* - positive ck and ck_n edges are used to form internal clock +* - positive dqs and dqs_n edges are used to latch data +* - test mode is not modeled +* - Duty Cycle Corrector is not modeled +* - Temperature Compensated Self Refresh is not modeled +* - DLL off mode is not modeled. +* +* Note: - Set simulator resolution to "ps" accuracy +* - Set DEBUG = 0 to disable $display messages +* +* Disclaimer This software code and all associated documentation, comments or other +* of Warranty: information (collectively "Software") is provided "AS IS" without +* warranty of any kind. MICRON TECHNOLOGY, INC. ("MTI") EXPRESSLY +* DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED +* TO, NONINFRINGEMENT OF THIRD PARTY RIGHTS, AND ANY IMPLIED WARRANTIES +* OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. MTI DOES NOT +* WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE +* OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE. +* FURTHERMORE, MTI DOES NOT MAKE ANY REPRESENTATIONS REGARDING THE USE OR +* THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS, +* ACCURACY, RELIABILITY, OR OTHERWISE. THE ENTIRE RISK ARISING OUT OF USE +* OR PERFORMANCE OF THE SOFTWARE REMAINS WITH YOU. IN NO EVENT SHALL MTI, +* ITS AFFILIATED COMPANIES OR THEIR SUPPLIERS BE LIABLE FOR ANY DIRECT, +* INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES (INCLUDING, +* WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, +* OR LOSS OF INFORMATION) ARISING OUT OF YOUR USE OF OR INABILITY TO USE +* THE SOFTWARE, EVEN IF MTI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +* DAMAGES. Because some jurisdictions prohibit the exclusion or +* limitation of liability for consequential or incidental damages, the +* above limitation may not apply to you. +* +* Copyright 2003 Micron Technology, Inc. All rights reserved. +* +* Rev Author Date Changes +* --------------------------------------------------------------------------------------- +* 0.41 JMK 05/12/06 Removed auto-precharge to power down error check. +* 0.42 JMK 08/25/06 Created internal clock using ck and ck_n. +* TDQS can only be enabled in EMR for x8 configurations. +* CAS latency is checked vs frequency when DLL locks. +* Improved checking of DQS during writes. +* Added true BL4 operation. +* 0.43 JMK 08/14/06 Added checking for setting reserved bits in Mode Registers. +* Added ODTS Readout. +* Replaced tZQCL with tZQinit and tZQoper +* Fixed tWRPDEN and tWRAPDEN during BC4MRS and BL4MRS. +* Added tRFC checking for Refresh to Power-Down Re-Entry. +* Added tXPDLL checking for Power-Down Exit to Refresh to Power-Down Entry +* Added Clock Frequency Change during Precharge Power-Down. +* Added -125x speed grades. +* Fixed tRCD checking during Write. +* 1.00 JMK 05/11/07 Initial release +* 1.10 JMK 06/26/07 Fixed ODTH8 check during BLOTF +* Removed temp sensor readout from MPR +* Updated initialization sequence +* Updated timing parameters +* 1.20 JMK 09/05/07 Updated clock frequency change +* Added ddr3_dimm module +* 1.30 JMK 01/23/08 Updated timing parameters +* 1.40 JMK 12/02/08 Added support for DDR3-1866 and DDR3-2133 +* renamed ddr3_dimm.v to ddr3_module.v and added SODIMM support. +* Added multi-chip package model support in ddr3_mcp.v +* 1.50 JMK 05/04/08 Added 1866 and 2133 speed grades. +* 1.60 MYY 07/10/09 Merging of 1.50 version and pre-1.0 version changes +* 1.61 SPH 12/10/09 Only check tIH for cmd_addr if CS# LOW +* 1.62 SPH 10/26/10 Added 4Gb DDR3 SDRAM support +* 1.63 MYY 11/09/10 Added Dll Disable mode +* 1.64 MYY 07/28/11 Check dqs_in for dqs timing check +* 1.65 MYY 09/19/11 Widen internal bus width +* 1.66 MYY 01/20/12 Support ODT tied high feature +* 1.67 MYY 02/03/12 Added TJIT_PER margin for timing checks +* 1.68 SPH 04/02/12 Added memory preload +* 1.69 SPH 03/19/13 Update tZQCS, tZQinit, tZQoper timing parameters +* 1.70 SPH 04/08/14 Update tRFC to PRECARGE check +*****************************************************************************************/ +// DO NOT CHANGE THE TIMESCALE +// MAKE SURE YOUR SIMULATOR USES "PS" RESOLUTION +`timescale 1ps / 1ps + +module ddr3 ( + rst_n, + ck, + ck_n, + cke, + cs_n, + ras_n, + cas_n, + we_n, + dm_tdqs, + ba, + addr, + dq, + dqs, + dqs_n, + tdqs_n, + odt +); + +`include "dram_model/2048Mb_ddr3_parameters.vh" + + initial begin + $display ("TCK_MIN = %d", TCK_MIN); +`ifdef sg15E + $display ("sg15E = `sg15E"); +`endif + +`ifdef sg093 // sg093 is equivalent to the JEDEC DDR3-2133 (14-14-14) speed bin + $display ("sg093"); +`elsif sg15E + $display ("sg15E"); +`endif + end + + parameter check_strict_mrbits = 1; + parameter check_strict_timing = 1; + parameter feature_pasr = 1; + parameter feature_truebl4 = 0; + parameter feature_odt_hi = 0; + parameter PERTCKAVG=TDLLK; + + // text macros + `define DQ_PER_DQS DQ_BITS/DQS_BITS + `define BANKS (1<= 2. \nBL_MAX = %d", BL_MAX); + if ((1< BL_MAX) + $display("%m ERROR: 2^BO_BITS cannot be greater than BL_MAX parameter."); +`ifdef CVC + $timeformat (-12, 1, " ps", 10); +`else + $timeformat (-12, 1, " ps", 1); +`endif + seed = RANDOM_SEED; + + ck_cntr = 0; + end + + function integer get_rtt_wr; + input [1:0] rtt; + begin + get_rtt_wr = RZQ/{rtt[0], rtt[1], 1'b0}; + end + endfunction + + function integer get_rtt_nom; + input [2:0] rtt; + begin + case (rtt) + 1: get_rtt_nom = RZQ/4; + 2: get_rtt_nom = RZQ/2; + 3: get_rtt_nom = RZQ/6; + 4: get_rtt_nom = RZQ/12; + 5: get_rtt_nom = RZQ/8; + default : get_rtt_nom = 0; + endcase + end + endfunction + + // calculate the absolute value of a real number + function real abs_value; + input arg; + real arg; + begin + if (arg < 0.0) + abs_value = -1.0 * arg; + else + abs_value = arg; + end + endfunction + + function integer ceil; + input number; + real number; + + // LMR 4.1.7 + // When either operand of a relational expression is a real operand then the other operand shall be converted + // to an equivalent real value, and the expression shall be interpreted as a comparison between two real values. + if (number > $rtoi(number)) + ceil = $rtoi(number) + 1; + else + ceil = number; + endfunction + + function integer floor; + input number; + real number; + + // LMR 4.1.7 + // When either operand of a relational expression is a real operand then the other operand shall be converted + // to an equivalent real value, and the expression shall be interpreted as a comparison between two real values. + if (number < $rtoi(number)) + floor = $rtoi(number) - 1; + else + floor = number; + endfunction + + function integer max( input integer a, input integer b ); + max = (a < b) ? b : a; + endfunction + + function integer min( input integer a, input integer b ); + min = (a > b) ? b : a; + endfunction + +`ifdef MAX_MEM + + function integer open_bank_file( input integer bank ); + integer fd; + reg [2048:1] filename; + begin + $sformat( filename, "%0s/%m.%0d", tmp_model_dir, bank ); + + fd = $fopen(filename, "wb+"); + if (fd == 0) + begin + $display("%m: at time %0t ERROR: failed to open %0s.", $time, filename); + $finish; + end + else + begin + if (DEBUG) $display("%m: at time %0t INFO: opening %0s.", $time, filename); + open_bank_file = fd; + end + + end + endfunction + + function [RFF_BITS:1] read_from_file( + input integer fd, + input integer index + ); + integer code; + integer offset; + reg [1024:1] msg; + reg [RFF_BITS:1] read_value; +`ifdef CVC + reg [RFF_BITS*2+8:1] read_str; +`endif + + begin + offset = index * RFF_CHUNK; + code = $fseek( fd, offset, 0 ); + // $fseek returns 0 on success, -1 on failure + if (code != 0) + begin + $display("%m: at time %t ERROR: fseek to %d failed index=%d ", $time, offset, index); +// $finish; + end +`ifdef CVC + code = $fgets(read_str, fd); + code = $sscanf(read_str, "%h", read_value); +`else + code = $fscanf(fd, "%z", read_value); +`endif + // $fscanf returns number of items read + if (code != 1) + begin + if ($ferror(fd,msg) != 0) + begin + $display("%m: at time %t ERROR: fscanf failed at %d", $time, index); + $display(msg); + $finish; + end + else + read_value = 'hx; + end + + /* when reading from unwritten portions of the file, 0 will be returned. + * Use 0 in bit 1 as indicator that invalid data has been read. + * A true 0 is encoded as Z. + */ +`ifdef CVC + if (read_value[4:1] === 4'bzzzz) + // true 0 encoded as Z, data is valid + read_value[4:1] = 4'b0000; + else if (read_value[4:1] === 4'b0000) + // read from file section that has not been written + read_value = 'hx; +`else + if (read_value[1] === 1'bz) + // true 0 encoded as Z, data is valid + read_value[1] = 1'b0; + else if (read_value[1] === 1'b0) + // read from file section that has not been written + read_value = 'hx; +`endif + + read_from_file = read_value; + end + endfunction +/* + task write_to_file( + input integer fd, + input integer index, + input [RFF_BITS:1] data + ); +*/ + task write_to_file; + input integer fd; + input integer index; + input [RFF_BITS:1] data; + + + integer code; + integer offset; + + begin + offset = index * RFF_CHUNK; + code = $fseek( fd, offset, 0 ); + if (code != 0) + begin + $display("%m: at time %t ERROR: fseek to %d failed", $time, offset); + $finish; + end + +`ifdef CVC + // encode a valid data + if (data[4:1] === 4'bzzzz) + data[4:1] = 4'bxxxx; + else if (data[4:1] === 4'b0000) + data[4:1] = 4'bzzzz; + + $fwrite( fd, "%h", data ); +`else + // encode a valid data + if (data[1] === 1'bz) + data[1] = 1'bx; + else if (data[1] === 1'b0) + data[1] = 1'bz; + + $fwrite( fd, "%z", data ); +`endif + end + endtask +`else + function get_index; + input [`MAX_BITS-1:0] addr; + begin : index + get_index = 0; + for (memory_index=0; memory_index>(ROW_BITS+COL_BITS-BL_BITS)); + if (!banks[ba]) begin //bank is selected to keep + address[i] = address[memory_index]; + memory[i] = memory[memory_index]; + i = i + 1; + end + end + // clean up the unused banks + for (memory_index=i; memory_index TRAS_MAX) $display ("%m: at time %t ERROR: tRAS maximum violation during %s to bank %d", $time, cmd_string[cmd], bank); + if ($time - tm_bank_activate[bank] < TRAS_MIN-TJIT_PER) $display ("%m: at time %t ERROR: tRAS minimum violation during %s to bank %d", $time, cmd_string[cmd], bank);end + {1'bx, SAME_BANK , ACTIVATE , ACTIVATE } : begin if ($time - tm_bank_activate[bank] < TRC-TJIT_PER) $display ("%m: at time %t ERROR: tRC violation during %s to bank %d", $time, cmd_string[cmd], bank); end + {1'bx, SAME_BANK , ACTIVATE , WRITE } , + {1'bx, SAME_BANK , ACTIVATE , READ } : ; // tRCD is checked outside this task + {1'b0, DIFF_BANK , ACTIVATE , ACTIVATE } : begin if (($time - tm_activate < TRRD) || (ck_cntr - ck_activate < TRRD_TCK)) $display ("%m: at time %t ERROR: tRRD violation during %s to bank %d", $time, cmd_string[cmd], bank); end + {1'b1, DIFF_BANK , ACTIVATE , ACTIVATE } : begin if (($time - tm_group_activate[bank[1]] < TRRD) || (ck_cntr - ck_group_activate[bank[1]] < TRRD_TCK)) $display ("%m: at time %t ERROR: tRRD violation during %s to bank %d", $time, cmd_string[cmd], bank); end + {1'b1, DIFF_GROUP, ACTIVATE , ACTIVATE } : begin if (($time - tm_activate < TRRD_DG) || (ck_cntr - ck_activate < TRRD_DG_TCK)) $display ("%m: at time %t ERROR: tRRD_DG violation during %s to bank %d", $time, cmd_string[cmd], bank); end + {1'bx, DIFF_BANK , ACTIVATE , REFRESH } : begin if ($time - tm_activate < TRC-TJIT_PER) $display ("%m: at time %t ERROR: tRC violation during %s", $time, cmd_string[cmd]); end + {1'bx, DIFF_BANK , ACTIVATE , PWR_DOWN } : begin if (ck_cntr - ck_activate < TACTPDEN) $display ("%m: at time %t ERROR: tACTPDEN violation during %s", $time, cmd_string[cmd]); end + + // write + {1'bx, SAME_BANK , WRITE , PRECHARGE} : begin if (($time - tm_bank_write_end[bank] < TWR-TJIT_PER) || (ck_cntr - ck_bank_write[bank] <= write_latency + burst_length/2)) $display ("%m: at time %t ERROR: tWR violation during %s to bank %d", $time, cmd_string[cmd], bank); end + {1'b0, DIFF_BANK , WRITE , WRITE } : begin if (ck_cntr - ck_write < TCCD) $display ("%m: at time %t ERROR: tCCD violation during %s to bank %d", $time, cmd_string[cmd], bank); end + {1'b1, DIFF_BANK , WRITE , WRITE } : begin if (ck_cntr - ck_group_write[bank[1]] < TCCD) $display ("%m: at time %t ERROR: tCCD violation during %s to bank %d", $time, cmd_string[cmd], bank); end + {1'b0, DIFF_BANK , WRITE , READ } : begin if (ck_cntr - ck_write < write_latency + burst_length/2 + TWTR_TCK - additive_latency) $display ("%m: at time %t ERROR: tWTR violation during %s to bank %d", $time, cmd_string[cmd], bank); end + {1'b1, DIFF_BANK , WRITE , READ } : begin if (ck_cntr - ck_group_write[bank[1]] < write_latency + burst_length/2 + TWTR_TCK - additive_latency) $display ("%m: at time %t ERROR: tWTR violation during %s to bank %d", $time, cmd_string[cmd], bank); end + {1'b1, DIFF_GROUP, WRITE , WRITE } : begin if (ck_cntr - ck_write < TCCD_DG) $display ("%m: at time %t ERROR: tCCD_DG violation during %s to bank %d", $time, cmd_string[cmd], bank); end + {1'b1, DIFF_GROUP, WRITE , READ } : begin if (ck_cntr - ck_write < write_latency + burst_length/2 + TWTR_DG_TCK - additive_latency) $display ("%m: at time %t ERROR: tWTR_DG violation during %s to bank %d", $time, cmd_string[cmd], bank); end + {1'bx, DIFF_BANK , WRITE , PWR_DOWN } : begin if (($time - tm_write_end < TWR-TJIT_PER) || (ck_cntr - ck_write < write_latency + burst_length/2)) $display ("%m: at time %t ERROR: tWRPDEN violation during %s", $time, cmd_string[cmd]); end + + // read + {1'bx, SAME_BANK , READ , PRECHARGE} : begin if (($time - tm_bank_read_end[bank] < TRTP-TJIT_PER) || (ck_cntr - ck_bank_read[bank] < additive_latency + TRTP_TCK)) $display ("%m: at time %t ERROR: tRTP violation during %s to bank %d", $time, cmd_string[cmd], bank); end + {1'b0, DIFF_BANK , READ , WRITE } : ; // tRTW is checked outside this task + {1'b1, DIFF_BANK , READ , WRITE } : ; // tRTW is checked outside this task + {1'b0, DIFF_BANK , READ , READ } : begin if (ck_cntr - ck_read < TCCD) $display ("%m: at time %t ERROR: tCCD violation during %s to bank %d", $time, cmd_string[cmd], bank); end + {1'b1, DIFF_BANK , READ , READ } : begin if (ck_cntr - ck_group_read[bank[1]] < TCCD) $display ("%m: at time %t ERROR: tCCD violation during %s to bank %d", $time, cmd_string[cmd], bank); end + {1'b1, DIFF_GROUP, READ , WRITE } : ; // tRTW is checked outside this task + {1'b1, DIFF_GROUP, READ , READ } : begin if (ck_cntr - ck_read < TCCD_DG) $display ("%m: at time %t ERROR: tCCD_DG violation during %s to bank %d", $time, cmd_string[cmd], bank); end + {1'bx, DIFF_BANK , READ , PWR_DOWN } : begin if (ck_cntr - ck_read < read_latency + 5) $display ("%m: at time %t ERROR: tRDPDEN violation during %s", $time, cmd_string[cmd]); end + + // zq + {1'bx, DIFF_BANK , ZQ , LOAD_MODE} : ; // 1 tCK + {1'bx, DIFF_BANK , ZQ , REFRESH } , + {1'bx, DIFF_BANK , ZQ , PRECHARGE} , + {1'bx, DIFF_BANK , ZQ , ACTIVATE } , + {1'bx, DIFF_BANK , ZQ , ZQ } , + {1'bx, DIFF_BANK , ZQ , PWR_DOWN } , + {1'bx, DIFF_BANK , ZQ , SELF_REF } : begin if (ck_cntr - ck_zqinit < TZQINIT) $display ("%m: at time %t ERROR: tZQinit violation during %s", $time, cmd_string[cmd]); + if (ck_cntr - ck_zqoper < TZQOPER) $display ("%m: at time %t ERROR: tZQoper violation during %s", $time, cmd_string[cmd]); + if (ck_cntr - ck_zqcs < TZQCS) $display ("%m: at time %t ERROR: tZQCS violation during %s", $time, cmd_string[cmd]); end + + // power down + {1'bx, DIFF_BANK , PWR_DOWN , LOAD_MODE} , + {1'bx, DIFF_BANK , PWR_DOWN , REFRESH } , + {1'bx, DIFF_BANK , PWR_DOWN , PRECHARGE} , + {1'bx, DIFF_BANK , PWR_DOWN , ACTIVATE } , + {1'bx, DIFF_BANK , PWR_DOWN , WRITE } , + {1'bx, DIFF_BANK , PWR_DOWN , ZQ } : begin if (($time - tm_power_down < TXP) || (ck_cntr - ck_power_down < TXP_TCK)) $display ("%m: at time %t ERROR: tXP violation during %s", $time, cmd_string[cmd]); end + {1'bx, DIFF_BANK , PWR_DOWN , READ } : begin if (($time - tm_power_down < TXP) || (ck_cntr - ck_power_down < TXP_TCK)) $display ("%m: at time %t ERROR: tXP violation during %s", $time, cmd_string[cmd]); + else if (($time - tm_slow_exit_pd < TXPDLL) || (ck_cntr - ck_slow_exit_pd < TXPDLL_TCK)) $display ("%m: at time %t ERROR: tXPDLL violation during %s", $time, cmd_string[cmd]); end + {1'bx, DIFF_BANK , PWR_DOWN , PWR_DOWN } , + {1'bx, DIFF_BANK , PWR_DOWN , SELF_REF } : begin if (($time - tm_power_down < TXP) || (ck_cntr - ck_power_down < TXP_TCK)) $display ("%m: at time %t ERROR: tXP violation during %s", $time, cmd_string[cmd]); + if ((tm_power_down > tm_refresh) && ($time - tm_refresh < TRFC_MIN)) $display ("%m: at time %t ERROR: tRFC violation during %s", $time, cmd_string[cmd]); + if ((tm_refresh > tm_power_down) && (($time - tm_power_down < TXPDLL) || (ck_cntr - ck_power_down < TXPDLL_TCK))) $display ("%m: at time %t ERROR: tXPDLL violation during %s", $time, cmd_string[cmd]); + if (($time - tm_cke_cmd < TCKE) || (ck_cntr - ck_cke_cmd < TCKE_TCK)) $display ("%m: at time %t ERROR: tCKE violation on CKE", $time); end + + // self refresh + {1'bx, DIFF_BANK , SELF_REF , LOAD_MODE} , + {1'bx, DIFF_BANK , SELF_REF , REFRESH } , + {1'bx, DIFF_BANK , SELF_REF , PRECHARGE} , + {1'bx, DIFF_BANK , SELF_REF , ACTIVATE } , + {1'bx, DIFF_BANK , SELF_REF , WRITE } , + {1'bx, DIFF_BANK , SELF_REF , ZQ } : begin if (($time - tm_self_refresh < TXS) || (ck_cntr - ck_self_refresh < TXS_TCK)) $display ("%m: at time %t ERROR: tXS violation during %s", $time, cmd_string[cmd]); end + {1'bx, DIFF_BANK , SELF_REF , READ } : begin if (ck_cntr - ck_self_refresh < TXSDLL) $display ("%m: at time %t ERROR: tXSDLL violation during %s", $time, cmd_string[cmd]); end + {1'bx, DIFF_BANK , SELF_REF , PWR_DOWN } , + {1'bx, DIFF_BANK , SELF_REF , SELF_REF } : begin if (($time - tm_self_refresh < TXS) || (ck_cntr - ck_self_refresh < TXS_TCK)) $display ("%m: at time %t ERROR: tXS violation during %s", $time, cmd_string[cmd]); + if (($time - tm_cke_cmd < TCKE) || (ck_cntr - ck_cke_cmd < TCKE_TCK)) $display ("%m: at time %t ERROR: tCKE violation on CKE", $time); end + endcase + end + endtask + + task cmd_task; + inout prev_cke; + input cke; + input [2:0] cmd; + input [BA_BITS-1:0] bank; + input [ADDR_BITS-1:0] addr; + reg [`BANKS:0] i; + integer j; + reg [`BANKS:0] tfaw_cntr; + reg [COL_BITS-1:0] col; + reg group; + begin + if (cmd != NOP) begin + $display("[%t] cmd_task %s", $time, cmd_string[cmd]); + end + + // tRFC max check + if (!er_trfc_max && !in_self_refresh) begin + if ($time - tm_refresh > TRFC_MAX && check_strict_timing) begin + $display ("%m: at time %t ERROR: tRFC maximum violation during %s", $time, cmd_string[cmd]); + er_trfc_max = 1; + end + end + if (cke) begin + if ((cmd < NOP) && (cmd != PRECHARGE)) begin + if (($time - tm_txpr < TXPR) || (ck_cntr - ck_txpr < TXPR_TCK)) + $display ("%m: at time %t ERROR: tXPR violation during %s", $time, cmd_string[cmd]); + for (j=0; j<=SELF_REF; j=j+1) begin + chk_err(SAME_BANK , bank, j, cmd); + chk_err(DIFF_BANK , bank, j, cmd); + chk_err(DIFF_GROUP, bank, j, cmd); + end + end + case (cmd) + LOAD_MODE : begin + if (|odt_pipeline) + $display ("%m: at time %t ERROR: ODTL violation during %s", $time, cmd_string[cmd]); + if (odt_state && !feature_odt_hi) + $display ("%m: at time %t ERROR: ODT must be off prior to %s", $time, cmd_string[cmd]); + + if (|active_bank) begin + $display ("%m: at time %t ERROR: %s Failure. All banks must be Precharged.", $time, cmd_string[cmd]); + if (STOP_ON_ERROR) $stop(0); + end else begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d", $time, cmd_string[cmd], bank); + if (bank>>2) begin + $display ("%m: at time %t ERROR: %s %d Illegal value. Reserved bank bits must be programmed to zero", $time, cmd_string[cmd], bank); + end + case (bank) + 0 : begin + // Burst Length + if (addr[1:0] == 2'b00) begin + burst_length = 8; + blotf = 0; + truebl4 = 0; + if (DEBUG) $display ("%m: at time %t INFO: %s %d Burst Length = %d", $time, cmd_string[cmd], bank, burst_length); + end else if (addr[1:0] == 2'b01) begin + burst_length = 8; + blotf = 1; + if (DEBUG) $display ("%m: at time %t INFO: %s %d Burst Length = Select via A12", $time, cmd_string[cmd], bank); + end else if (addr[1:0] == 2'b10) begin + burst_length = 4; + blotf = 0; + if (DEBUG) $display ("%m: at time %t INFO: %s %d Burst Length = Fixed %d (chop)", $time, cmd_string[cmd], bank, burst_length); + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal Burst Length = %d", $time, cmd_string[cmd], bank, addr[1:0]); + end + // Burst Order + burst_order = addr[3]; + if (!burst_order) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Burst Order = Sequential", $time, cmd_string[cmd], bank); + end else if (burst_order) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Burst Order = Interleaved", $time, cmd_string[cmd], bank); + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal Burst Order = %d", $time, cmd_string[cmd], bank, burst_order); + end + // CAS Latency + cas_latency = {addr[2],addr[6:4]} + 4; + set_latency; + if ((cas_latency >= CL_MIN) && (cas_latency <= CL_MAX)) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d CAS Latency = %d", $time, cmd_string[cmd], bank, cas_latency); + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal CAS Latency = %d", $time, cmd_string[cmd], bank, cas_latency); + end + // Reserved + if (addr[7] !== 0 && check_strict_mrbits) begin + $display ("%m: at time %t ERROR: %s %d Illegal value. Reserved address bits must be programmed to zero", $time, cmd_string[cmd], bank); + end + // DLL Reset + dll_reset = addr[8]; + if (!dll_reset) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d DLL Reset = Normal", $time, cmd_string[cmd], bank); + end else if (dll_reset) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d DLL Reset = Reset DLL", $time, cmd_string[cmd], bank); + dll_locked = 0; + init_dll_reset = 1; + ck_dll_reset <= ck_cntr; + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal DLL Reset = %d", $time, cmd_string[cmd], bank, dll_reset); + end + + // Write Recovery + if (addr[11:9] == 0) begin + write_recovery = 16; + end else if (addr[11:9] < 4) begin + write_recovery = addr[11:9] + 4; + end else begin + write_recovery = 2*addr[11:9]; + end + + if ((write_recovery >= WR_MIN) && (write_recovery <= WR_MAX)) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Write Recovery = %d", $time, cmd_string[cmd], bank, write_recovery); + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal Write Recovery = %d", $time, cmd_string[cmd], bank, write_recovery); + end + // Power Down Mode + low_power = !addr[12]; + if (!low_power) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Power Down Mode = DLL on", $time, cmd_string[cmd], bank); + end else if (low_power) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Power Down Mode = DLL off", $time, cmd_string[cmd], bank); + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal Power Down Mode = %d", $time, cmd_string[cmd], bank, low_power); + end + // Reserved + if (ADDR_BITS>13 && addr[13] !== 0 && check_strict_mrbits) begin + $display ("%m: at time %t ERROR: %s %d Illegal value. Reserved address bits must be programmed to zero", $time, cmd_string[cmd], bank); + end + end + 1 : begin + // DLL Enable + dll_en = !addr[0]; + if (!dll_en) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d DLL Enable = Disabled", $time, cmd_string[cmd], bank); + if (check_strict_mrbits) $display ("%m: at time %t WARNING: %s %d DLL off mode is not fully modeled", $time, cmd_string[cmd], bank); + end else if (dll_en) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d DLL Enable = Enabled", $time, cmd_string[cmd], bank); + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal DLL Enable = %d", $time, cmd_string[cmd], bank, dll_en); + end + // Output Drive Strength + if ({addr[5], addr[1]} == 2'b00) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Output Drive Strength = %d Ohm", $time, cmd_string[cmd], bank, RZQ/6); + end else if ({addr[5], addr[1]} == 2'b01) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Output Drive Strength = %d Ohm", $time, cmd_string[cmd], bank, RZQ/7); + end else if ({addr[5], addr[1]} == 2'b11) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Output Drive Strength = %d Ohm", $time, cmd_string[cmd], bank, RZQ/5); + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal Output Drive Strength = %d", $time, cmd_string[cmd], bank, {addr[5], addr[1]}); + end + // ODT Rtt (Rtt_NOM) + odt_rtt_nom = {addr[9], addr[6], addr[2]}; + if (odt_rtt_nom == 3'b000) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d ODT Rtt = Disabled", $time, cmd_string[cmd], bank); + odt_en = 0; + end else if ((odt_rtt_nom < 4) || ((!addr[7] || (addr[7] && addr[12])) && (odt_rtt_nom < 6))) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d ODT Rtt = %d Ohm", $time, cmd_string[cmd], bank, get_rtt_nom(odt_rtt_nom)); + odt_en = 1; + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal ODT Rtt = %d", $time, cmd_string[cmd], bank, odt_rtt_nom); + odt_en = 0; + end + // Report the additive latency value + al = addr[4:3]; + set_latency; + if (al == 0) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Additive Latency = %d", $time, cmd_string[cmd], bank, al); + end else if ((al >= AL_MIN) && (al <= AL_MAX)) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Additive Latency = CL - %d", $time, cmd_string[cmd], bank, al); + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal Additive Latency = %d", $time, cmd_string[cmd], bank, al); + end + // Write Levelization + write_levelization = addr[7]; + if (!write_levelization) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Write Levelization = Disabled", $time, cmd_string[cmd], bank); + end else if (write_levelization) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Write Levelization = Enabled", $time, cmd_string[cmd], bank); + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal Write Levelization = %d", $time, cmd_string[cmd], bank, write_levelization); + end + // Reserved + if (addr[8] !== 0 && check_strict_mrbits) begin + $display ("%m: at time %t ERROR: %s %d Illegal value. Reserved address bits must be programmed to zero", $time, cmd_string[cmd], bank); + end + // Reserved + if (addr[10] !== 0 && check_strict_mrbits) begin + $display ("%m: at time %t ERROR: %s %d Illegal value. Reserved address bits must be programmed to zero", $time, cmd_string[cmd], bank); + end + // TDQS Enable + tdqs_en = addr[11]; + if (!tdqs_en) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d TDQS Enable = Disabled", $time, cmd_string[cmd], bank); + end else if (tdqs_en) begin + if (8 == DQ_BITS) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d TDQS Enable = Enabled", $time, cmd_string[cmd], bank); + end + else begin + $display ("%m: at time %t WARNING: %s %d Illegal TDQS Enable. TDQS only exists on a x8 part", $time, cmd_string[cmd], bank); + tdqs_en = 0; + end + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal TDQS Enable = %d", $time, cmd_string[cmd], bank, tdqs_en); + end + // Output Enable + out_en = !addr[12]; + if (!out_en) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Qoff = Disabled", $time, cmd_string[cmd], bank); + end else if (out_en) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Qoff = Enabled", $time, cmd_string[cmd], bank); + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal Qoff = %d", $time, cmd_string[cmd], bank, out_en); + end + // Reserved + if (ADDR_BITS>13 && addr[13] !== 0 && check_strict_mrbits) begin + $display ("%m: at time %t ERROR: %s %d Illegal value. Reserved address bits must be programmed to zero", $time, cmd_string[cmd], bank); + end + end + 2 : begin + if (feature_pasr) begin + // Partial Array Self Refresh + pasr = addr[2:0]; + case (pasr) + 3'b000 : if (DEBUG) $display ("%m: at time %t INFO: %s %d Partial Array Self Refresh = Bank 0-7", $time, cmd_string[cmd], bank); + 3'b001 : if (DEBUG) $display ("%m: at time %t INFO: %s %d Partial Array Self Refresh = Bank 0-3", $time, cmd_string[cmd], bank); + 3'b010 : if (DEBUG) $display ("%m: at time %t INFO: %s %d Partial Array Self Refresh = Bank 0-1", $time, cmd_string[cmd], bank); + 3'b011 : if (DEBUG) $display ("%m: at time %t INFO: %s %d Partial Array Self Refresh = Bank 0", $time, cmd_string[cmd], bank); + 3'b100 : if (DEBUG) $display ("%m: at time %t INFO: %s %d Partial Array Self Refresh = Bank 2-7", $time, cmd_string[cmd], bank); + 3'b101 : if (DEBUG) $display ("%m: at time %t INFO: %s %d Partial Array Self Refresh = Bank 4-7", $time, cmd_string[cmd], bank); + 3'b110 : if (DEBUG) $display ("%m: at time %t INFO: %s %d Partial Array Self Refresh = Bank 6-7", $time, cmd_string[cmd], bank); + 3'b111 : if (DEBUG) $display ("%m: at time %t INFO: %s %d Partial Array Self Refresh = Bank 7", $time, cmd_string[cmd], bank); + default : $display ("%m: at time %t ERROR: %s %d Illegal Partial Array Self Refresh = %d", $time, cmd_string[cmd], bank, pasr); + endcase + end + else + if (addr[2:0] !== 0 && check_strict_mrbits) begin + $display ("%m: at time %t ERROR: %s %d Illegal value. Reserved address bits must be programmed to zero", $time, cmd_string[cmd], bank); + end + // CAS Write Latency + cas_write_latency = addr[5:3]+5; + set_latency; + if ((cas_write_latency >= CWL_MIN) && (cas_write_latency <= CWL_MAX)) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d CAS Write Latency = %d", $time, cmd_string[cmd], bank, cas_write_latency); + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal CAS Write Latency = %d", $time, cmd_string[cmd], bank, cas_write_latency); + end + // Auto Self Refresh Method + asr = addr[6]; + if (!asr) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Auto Self Refresh = Disabled", $time, cmd_string[cmd], bank); + end else if (asr) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Auto Self Refresh = Enabled", $time, cmd_string[cmd], bank); + if (check_strict_mrbits) $display ("%m: at time %t WARNING: %s %d Auto Self Refresh is not modeled", $time, cmd_string[cmd], bank); + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal Auto Self Refresh = %d", $time, cmd_string[cmd], bank, asr); + end + // Self Refresh Temperature + srt = addr[7]; + if (!srt) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Self Refresh Temperature = Normal", $time, cmd_string[cmd], bank); + end else if (srt) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Self Refresh Temperature = Extended", $time, cmd_string[cmd], bank); + if (check_strict_mrbits) $display ("%m: at time %t WARNING: %s %d Self Refresh Temperature is not modeled", $time, cmd_string[cmd], bank); + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal Self Refresh Temperature = %d", $time, cmd_string[cmd], bank, srt); + end + if (asr && srt) + $display ("%m: at time %t ERROR: %s %d SRT must be set to 0 when ASR is enabled.", $time, cmd_string[cmd], bank); + // Reserved + if (addr[8] !== 0 && check_strict_mrbits) begin + $display ("%m: at time %t ERROR: %s %d Illegal value. Reserved address bits must be programmed to zero", $time, cmd_string[cmd], bank); + end + // Dynamic ODT (Rtt_WR) + odt_rtt_wr = addr[10:9]; + if (odt_rtt_wr == 2'b00) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Dynamic ODT = Disabled", $time, cmd_string[cmd], bank); + dyn_odt_en = 0; + end else if ((odt_rtt_wr > 0) && (odt_rtt_wr < 3)) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d Dynamic ODT Rtt = %d Ohm", $time, cmd_string[cmd], bank, get_rtt_wr(odt_rtt_wr)); + dyn_odt_en = 1; + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal Dynamic ODT = %d", $time, cmd_string[cmd], bank, odt_rtt_wr); + dyn_odt_en = 0; + end + // Reserved + if (ADDR_BITS>13 && addr[13:11] !== 0 && check_strict_mrbits) begin + $display ("%m: at time %t ERROR: %s %d Illegal value. Reserved address bits must be programmed to zero", $time, cmd_string[cmd], bank); + end + end + 3 : begin + mpr_select = addr[1:0]; + // MultiPurpose Register Select + if (mpr_select == 2'b00) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d MultiPurpose Register Select = Pre-defined pattern", $time, cmd_string[cmd], bank); + end else begin + if (check_strict_mrbits) $display ("%m: at time %t ERROR: %s %d Illegal MultiPurpose Register Select = %d", $time, cmd_string[cmd], bank, mpr_select); + end + // MultiPurpose Register Enable + mpr_en = addr[2]; + if (!mpr_en) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d MultiPurpose Register Enable = Disabled", $time, cmd_string[cmd], bank); + end else if (mpr_en) begin + if (DEBUG) $display ("%m: at time %t INFO: %s %d MultiPurpose Register Enable = Enabled", $time, cmd_string[cmd], bank); + end else begin + $display ("%m: at time %t ERROR: %s %d Illegal MultiPurpose Register Enable = %d", $time, cmd_string[cmd], bank, mpr_en); + end + + if (feature_truebl4 && (addr[11] == 1'b1)) begin + if (addr[11] == 1'b1) begin + truebl4 = 1; + $display(" EMRS3 Set True Bl4 mode only "); + end + end + + // Reserved + if (ADDR_BITS>13 && addr[13:3] !== 0 && check_strict_mrbits) begin + $display ("%m: at time %t ERROR: %s %d Illegal value. Reserved address bits must be programmed to zero", $time, cmd_string[cmd], bank); + end + end + endcase + if (dyn_odt_en && write_levelization) + $display ("%m: at time %t ERROR: Dynamic ODT is not available during Write Leveling mode.", $time); + init_mode_reg[bank] = 1; + mode_reg[bank] = addr; + // dll_reset bit self clear + if(bank==0 && addr[8]==1'b1) + mode_reg[0][8] <= #($rtoi(tck_avg)) 1'b0; + tm_load_mode <= $time; + ck_load_mode <= ck_cntr; + end + end + REFRESH : begin + if (mpr_en) begin + $display ("%m: at time %t ERROR: %s Failure. Multipurpose Register must be disabled.", $time, cmd_string[cmd]); + if (STOP_ON_ERROR) $stop(0); + end else if (|active_bank) begin + $display ("%m: at time %t ERROR: %s Failure. All banks must be Precharged.", $time, cmd_string[cmd]); + if (STOP_ON_ERROR) $stop(0); + end else begin + if (DEBUG) $display ("%m: at time %t INFO: %s", $time, cmd_string[cmd]); + er_trfc_max = 0; + ref_cntr = ref_cntr + 1; + tm_refresh <= $time; + ck_refresh <= ck_cntr; + end + end + PRECHARGE : begin + if (addr[AP]) begin + if (DEBUG) $display ("%m: at time %t INFO: %s All", $time, cmd_string[cmd]); + end + // PRECHARGE command will be treated as a NOP if there is no open row in that bank (idle state), + // or if the previously open row is already in the process of precharging + if (|active_bank) begin + if (($time - tm_txpr < TXPR) || (ck_cntr - ck_txpr < TXPR_TCK)) + $display ("%m: at time %t ERROR: tXPR violation during %s", $time, cmd_string[cmd]); + if (mpr_en) begin + $display ("%m: at time %t ERROR: %s Failure. Multipurpose Register must be disabled.", $time, cmd_string[cmd]); + if (STOP_ON_ERROR) $stop(0); + end else begin + for (i=0; i<`BANKS; i=i+1) begin + if (active_bank[i]) begin + if (addr[AP] || (i == bank)) begin + + for (j=0; j<=SELF_REF; j=j+1) begin + chk_err(SAME_BANK, i, j, cmd); + chk_err(DIFF_BANK, i, j, cmd); + end + + if (auto_precharge_bank[i]) begin + $display ("%m: at time %t ERROR: %s Failure. Auto Precharge is scheduled to bank %d.", $time, cmd_string[cmd], i); + if (STOP_ON_ERROR) $stop(0); + end else begin + if (DEBUG) $display ("%m: at time %t INFO: %s bank %d", $time, cmd_string[cmd], i); + active_bank[i] = 1'b0; + tm_bank_precharge[i] <= $time; + tm_precharge <= $time; + ck_precharge <= ck_cntr; + end + end + end + end + end + end // if (|active_bank) + else begin + chk_err(DIFF_BANK, 0, REFRESH, PRECHARGE); + end + end + ACTIVATE : begin + tfaw_cntr = 0; + for (i=0; i<`BANKS; i=i+1) begin + if ($time - tm_bank_activate[i] < TFAW) begin + tfaw_cntr = tfaw_cntr + 1; + end + end + if (tfaw_cntr > 3) begin + $display ("%m: at time %t ERROR: tFAW violation during %s to bank %d", $time, cmd_string[cmd], bank); + end + + if (mpr_en) begin + $display ("%m: at time %t ERROR: %s Failure. Multipurpose Register must be disabled.", $time, cmd_string[cmd]); + if (STOP_ON_ERROR) $stop(0); + end else if (!init_done) begin + $display ("%m: at time %t ERROR: %s Failure. Initialization sequence is not complete.", $time, cmd_string[cmd]); + if (STOP_ON_ERROR) $stop(0); + end else if (active_bank[bank]) begin + $display ("%m: at time %t ERROR: %s Failure. Bank %d must be Precharged.", $time, cmd_string[cmd], bank); + if (STOP_ON_ERROR) $stop(0); + end else begin + if (addr >= 1< AP +`else + col = {addr[BC-1:AP+1], addr[AP-1:0]}; // assume BC > AP +`endif + if (col >= 1< AP +`else + col = {addr[BC-1:AP+1], addr[AP-1:0]}; // assume BC > AP +`endif + if (col >= 1< TPD_MAX) + $display ("%m: at time %t ERROR: tPD maximum violation during Power Down Exit", $time); + if (DEBUG) $display ("%m: at time %t INFO: Power Down Exit", $time); + in_power_down = 0; + if ((active_bank == 0) && low_power) begin // precharge power down with dll off + if (ck_cntr - ck_odt < write_latency - 1) + $display ("%m: at time %t WARNING: tANPD violation during Power Down Exit. Synchronous or asynchronous change in termination resistance is possible.", $time); + tm_slow_exit_pd <= $time; + ck_slow_exit_pd <= ck_cntr; + end + tm_power_down <= $time; + ck_power_down <= ck_cntr; + end + if (in_self_refresh) begin + if (($time - tm_freq_change < TCKSRX) || (ck_cntr - ck_freq_change < TCKSRX_TCK)) + $display ("%m: at time %t ERROR: tCKSRX violation during Self Refresh Exit", $time); + if (ck_cntr - ck_cke_cmd < TCKESR_TCK) + $display ("%m: at time %t ERROR: tCKESR violation during Self Refresh Exit", $time); + if ($time - tm_cke < TISXR) + $display ("%m: at time %t ERROR: tISXR violation during Self Refresh Exit", $time); + if (DEBUG) $display ("%m: at time %t INFO: Self Refresh Exit", $time); + in_self_refresh = 0; + ck_dll_reset <= ck_cntr; + ck_self_refresh <= ck_cntr; + tm_self_refresh <= $time; + tm_refresh <= $time; + end + end + endcase + if ((prev_cke !== 1) && (cmd !== NOP)) begin + $display ("%m: at time %t ERROR: NOP or Deselect is required when CKE goes active.", $time); + end + + if (!init_done) begin + case (init_step) + 0 : begin +// if ($time - tm_rst_n < 500000000 && check_strict_timing) +// $display ("%m at time %t WARNING: 500 us is required after RST_N goes inactive before CKE goes active.", $time); + if ($time - tm_rst_n < (SIMUL_500US * 1000000) && check_strict_timing) + $display ("%m at time %t WARNING: %d (actually 500) us is required after RST_N goes inactive before CKE goes active.", $time, SIMUL_500US); + + tm_txpr <= $time; + ck_txpr <= ck_cntr; + init_step = init_step + 1; + end + 1 : begin + if (dll_en) init_step = init_step + 1; + end + 2 : begin + if (&init_mode_reg && init_dll_reset && zq_set) begin + if (DEBUG) $display ("%m: at time %t INFO: Initialization Sequence is complete", $time); + init_done = 1; + end + end + endcase + end + end else if (prev_cke) begin + if ((!init_done) && (init_step > 1)) begin + $display ("%m: at time %t ERROR: CKE must remain active until the initialization sequence is complete.", $time); + if (STOP_ON_ERROR) $stop(0); + end + case (cmd) + REFRESH : begin + if ($time - tm_txpr < TXPR) + $display ("%m: at time %t ERROR: tXPR violation during %s", $time, cmd_string[SELF_REF]); + for (j=0; j<=SELF_REF; j=j+1) begin + chk_err(DIFF_BANK, bank, j, SELF_REF); + end + + if (mpr_en) begin + $display ("%m: at time %t ERROR: Self Refresh Failure. Multipurpose Register must be disabled.", $time); + if (STOP_ON_ERROR) $stop(0); + end else if (|active_bank) begin + $display ("%m: at time %t ERROR: Self Refresh Failure. All banks must be Precharged.", $time); + if (STOP_ON_ERROR) $stop(0); + end else if (odt_state) begin + $display ("%m: at time %t ERROR: Self Refresh Failure. ODT must be off prior to entering Self Refresh", $time); + if (STOP_ON_ERROR) $stop(0); + end else if (!init_done) begin + $display ("%m: at time %t ERROR: Self Refresh Failure. Initialization sequence is not complete.", $time); + if (STOP_ON_ERROR) $stop(0); + end else begin + if (DEBUG) $display ("%m: at time %t INFO: Self Refresh Enter", $time); + if (feature_pasr) + // Partial Array Self Refresh + case (pasr) + 3'b000 : ;//keep Bank 0-7 + 3'b001 : begin if (DEBUG) $display("%m: at time %t INFO: Banks 4-7 will be lost due to Partial Array Self Refresh", $time); erase_banks(8'hF0); end + 3'b010 : begin if (DEBUG) $display("%m: at time %t INFO: Banks 2-7 will be lost due to Partial Array Self Refresh", $time); erase_banks(8'hFC); end + 3'b011 : begin if (DEBUG) $display("%m: at time %t INFO: Banks 1-7 will be lost due to Partial Array Self Refresh", $time); erase_banks(8'hFE); end + 3'b100 : begin if (DEBUG) $display("%m: at time %t INFO: Banks 0-1 will be lost due to Partial Array Self Refresh", $time); erase_banks(8'h03); end + 3'b101 : begin if (DEBUG) $display("%m: at time %t INFO: Banks 0-3 will be lost due to Partial Array Self Refresh", $time); erase_banks(8'h0F); end + 3'b110 : begin if (DEBUG) $display("%m: at time %t INFO: Banks 0-5 will be lost due to Partial Array Self Refresh", $time); erase_banks(8'h3F); end + 3'b111 : begin if (DEBUG) $display("%m: at time %t INFO: Banks 0-6 will be lost due to Partial Array Self Refresh", $time); erase_banks(8'h7F); end + endcase + in_self_refresh = 1; + dll_locked = 0; + end + end + NOP : begin + // entering precharge power down with dll off and tANPD has not been satisfied + if (low_power && (active_bank == 0) && |odt_pipeline) + $display ("%m: at time %t WARNING: tANPD violation during %s. Synchronous or asynchronous change in termination resistance is possible.", $time, cmd_string[PWR_DOWN]); + if ($time - tm_txpr < TXPR) + $display ("%m: at time %t ERROR: tXPR violation during %s", $time, cmd_string[PWR_DOWN]); + for (j=0; j<=SELF_REF; j=j+1) begin + chk_err(DIFF_BANK, bank, j, PWR_DOWN); + end + + if (mpr_en) begin + $display ("%m: at time %t ERROR: Power Down Failure. Multipurpose Register must be disabled.", $time); + if (STOP_ON_ERROR) $stop(0); + end else if (!init_done) begin + $display ("%m: at time %t ERROR: Power Down Failure. Initialization sequence is not complete.", $time); + if (STOP_ON_ERROR) $stop(0); + end else begin + if (DEBUG) begin + if (|active_bank) begin + $display ("%m: at time %t INFO: Active Power Down Enter", $time); + end else begin + $display ("%m: at time %t INFO: Precharge Power Down Enter", $time); + end + end + in_power_down = 1; + end + end + default : begin + $display ("%m: at time %t ERROR: NOP, Deselect, or Refresh is required when CKE goes inactive.", $time); + end + endcase + end else if (in_self_refresh || in_power_down) begin + if ((ck_cntr - ck_cke_cmd <= TCPDED) && (cmd !== NOP)) + $display ("%m: at time %t ERROR: tCPDED violation during Power Down or Self Refresh Entry. NOP or Deselect is required.", $time); + end + prev_cke = cke; + + end + endtask + + task data_task; + reg [BA_BITS-1:0] bank; + reg [ROW_BITS-1:0] row; + reg [COL_BITS-1:0] col; + integer i; + integer j; + begin + + if (diff_ck) begin + for (i=0; i<64; i=i+1) begin + if (dq_in_valid && dll_locked && ($time - tm_dqs_neg[i] < $rtoi(TDSS*tck_avg))) + $display ("%m: at time %t ERROR: tDSS violation on %s bit %d", $time, dqs_string[i/32], i%32); + if (check_write_dqs_high[i]) + $display ("%m: at time %t ERROR: %s bit %d latching edge required during the preceding clock period.", $time, dqs_string[i/32], i%32); + end + check_write_dqs_high <= 0; + end else begin + for (i=0; i<64; i=i+1) begin + if (dll_locked && dq_in_valid) begin + tm_tdqss = abs_value(1.0*tm_ck_pos - tm_dqss_pos[i]); + if ((tm_tdqss < tck_avg/2.0) && (tm_tdqss > TDQSS*tck_avg)) + $display ("%m: at time %t ERROR: tDQSS violation on %s bit %d", $time, dqs_string[i/32], i%32); + end + if (check_write_dqs_low[i]) + $display ("%m: at time %t ERROR: %s bit %d latching edge required during the preceding clock period", $time, dqs_string[i/32], i%32); + end + check_write_preamble <= 0; + check_write_postamble <= 0; + check_write_dqs_low <= 0; + end + + if (wr_pipeline[0] || rd_pipeline[0]) begin + bank = ba_pipeline[0]; + row = row_pipeline[0]; + col = col_pipeline[0]; + burst_cntr = 0; + memory_read(bank, row, col, memory_data); + end + + // burst counter + if (burst_cntr < burst_length) begin + burst_position = col ^ burst_cntr; + if (!burst_order) begin + burst_position[BO_BITS-1:0] = col + burst_cntr; + end + burst_cntr = burst_cntr + 1; + end + + // write dqs counter + if (wr_pipeline[WDQS_PRE + 1]) begin + wdqs_cntr = WDQS_PRE + bl_pipeline[WDQS_PRE + 1] + WDQS_PST - 1; + end + // write dqs + if ((wr_pipeline[2]) && (wdq_cntr == 0)) begin //write preamble + check_write_preamble <= ({DQS_BITS{1'b1}}<<32) | {DQS_BITS{1'b1}}; + end + if (wdqs_cntr > 1) begin // write data + if ((wdqs_cntr - WDQS_PST)%2) begin + check_write_dqs_high <= ({DQS_BITS{1'b1}}<<32) | {DQS_BITS{1'b1}}; + end else begin + check_write_dqs_low <= ({DQS_BITS{1'b1}}<<32) | {DQS_BITS{1'b1}}; + end + end + if (wdqs_cntr == WDQS_PST) begin // write postamble + check_write_postamble <= ({DQS_BITS{1'b1}}<<32) | {DQS_BITS{1'b1}}; + end + if (wdqs_cntr > 0) begin + wdqs_cntr = wdqs_cntr - 1; + end + + // write dq + if (dq_in_valid) begin // write data + bit_mask = 0; + if (diff_ck) begin + for (i=0; i>(burst_position*DQ_BITS); + if (DEBUG) $display ("%m: at time %t INFO: WRITE @ DQS= bank = %h row = %h col = %h data = %h",$time, bank, row, (-1*BL_MAX & col) + burst_position, dq_temp); + if (burst_cntr%BL_MIN == 0) begin + memory_write(bank, row, col, memory_data); + end + end + if (wr_pipeline[1]) begin + wdq_cntr = bl_pipeline[1]; + end + if (wdq_cntr > 0) begin + wdq_cntr = wdq_cntr - 1; + dq_in_valid = 1'b1; + end else begin + dq_in_valid = 1'b0; + dqs_in_valid <= 1'b0; + for (i=0; i<63; i=i+1) begin + wdqs_pos_cntr[i] <= 0; + end + end + if (wr_pipeline[0]) begin + b2b_write <= 1'b0; + end + if (wr_pipeline[2]) begin + if (dqs_in_valid) begin + b2b_write <= 1'b1; + end + dqs_in_valid <= 1'b1; + wr_burst_length = bl_pipeline[2]; + end + + // read dqs enable counter + if (rd_pipeline[RDQSEN_PRE]) begin + rdqsen_cntr = RDQSEN_PRE + bl_pipeline[RDQSEN_PRE] + RDQSEN_PST - 1; + end + if (rdqsen_cntr > 0) begin + rdqsen_cntr = rdqsen_cntr - 1; + dqs_out_en = 1'b1; + end else begin + dqs_out_en = 1'b0; + end + + // read dqs counter + if (rd_pipeline[RDQS_PRE]) begin + rdqs_cntr = RDQS_PRE + bl_pipeline[RDQS_PRE] + RDQS_PST - 1; + end + // read dqs + if (((rd_pipeline>>1 & {RDQS_PRE{1'b1}}) > 0) && (rdq_cntr == 0)) begin //read preamble + dqs_out = 1'b0; + end else if (rdqs_cntr > RDQS_PST) begin // read data + dqs_out = rdqs_cntr - RDQS_PST; + end else if (rdqs_cntr > 0) begin // read postamble + dqs_out = 1'b0; + end else begin + dqs_out = 1'b1; + end + if (rdqs_cntr > 0) begin + rdqs_cntr = rdqs_cntr - 1; + end + + // read dq enable counter + if (rd_pipeline[RDQEN_PRE]) begin + rdqen_cntr = RDQEN_PRE + bl_pipeline[RDQEN_PRE] + RDQEN_PST; + end + if (rdqen_cntr > 0) begin + rdqen_cntr = rdqen_cntr - 1; + dq_out_en = 1'b1; + end else begin + dq_out_en = 1'b0; + end + // read dq + if (rd_pipeline[0]) begin + rdq_cntr = bl_pipeline[0]; + end + if (rdq_cntr > 0) begin // read data + if (mpr_en) begin +`ifdef MPR_DQ0 // DQ0 output MPR data, other DQ low + if (mpr_select == 2'b00) begin // Calibration Pattern + dq_temp = {DQS_BITS{{`DQ_PER_DQS-1{1'b0}}, calibration_pattern[burst_position]}}; + end else if (odts_readout && (mpr_select == 2'b11)) begin // Temp Sensor (ODTS) + dq_temp = {DQS_BITS{{`DQ_PER_DQS-1{1'b0}}, temp_sensor[burst_position]}}; + end else begin // Reserved + dq_temp = {DQS_BITS{{`DQ_PER_DQS-1{1'b0}}, 1'bx}}; + end +`else // all DQ output MPR data + if (mpr_select == 2'b00) begin // Calibration Pattern + dq_temp = {DQS_BITS{{`DQ_PER_DQS{calibration_pattern[burst_position]}}}}; + end else if (odts_readout && (mpr_select == 2'b11)) begin // Temp Sensor (ODTS) + dq_temp = {DQS_BITS{{`DQ_PER_DQS{temp_sensor[burst_position]}}}}; + end else begin // Reserved + dq_temp = {DQS_BITS{{`DQ_PER_DQS{1'bx}}}}; + end +`endif + if (DEBUG) $display ("%m: at time %t READ @ DQS MultiPurpose Register %d, col = %d, data = %b", $time, mpr_select, burst_position, dq_temp[0]); + end else begin + dq_temp = memory_data>>(burst_position*DQ_BITS); + if (DEBUG) $display ("%m: at time %t INFO: READ @ DQS= bank = %h row = %h col = %h data = %h",$time, bank, row, (-1*BL_MAX & col) + burst_position, dq_temp); + end + dq_out = dq_temp; + rdq_cntr = rdq_cntr - 1; + end else begin + dq_out = {DQ_BITS{1'b1}}; + end + + // delay signals prior to output + if (RANDOM_OUT_DELAY && (dqs_out_en || (|dqs_out_en_dly) || dq_out_en || (|dq_out_en_dly))) begin + for (i=0; i dqsck[i] + TQH*tck_avg + TDQSQ) begin + dqsck_max = dqsck[i] + TQH*tck_avg + TDQSQ; + end + dqsck_min = -1*TDQSCK; + if (dqsck_min < dqsck[i] - TQH*tck_avg - TDQSQ) begin + dqsck_min = dqsck[i] - TQH*tck_avg - TDQSQ; + end + + // DQSQ requirements + // 1.) less than tDQSQ + // 2.) greater than 0 + // 3.) greater than tQH from the previous DQS edge + dqsq_min = 0; + if (dqsq_min < dqsck[i] - TQH*tck_avg) begin + dqsq_min = dqsck[i] - TQH*tck_avg; + end + if (dqsck_min == dqsck_max) begin + dqsck[i] = dqsck_min; + end else begin + dqsck[i] = $dist_uniform(seed, dqsck_min, dqsck_max); + end + dqsq_max = TDQSQ + dqsck[i]; + + dqs_out_en_dly[i] <= #(tck_avg/2) dqs_out_en; + dqs_out_dly[i] <= #(tck_avg/2 + dqsck[i]) dqs_out; + if (!write_levelization) begin + for (j=0; j<`DQ_PER_DQS; j=j+1) begin + dq_out_en_dly[i*`DQ_PER_DQS + j] <= #(tck_avg/2) dq_out_en; + if (dqsq_min == dqsq_max) begin + dq_out_dly [i*`DQ_PER_DQS + j] <= #(tck_avg/2 + dqsq_min) dq_out[i*`DQ_PER_DQS + j]; + end else begin + dq_out_dly [i*`DQ_PER_DQS + j] <= #(tck_avg/2 + $dist_uniform(seed, dqsq_min, dqsq_max)) dq_out[i*`DQ_PER_DQS + j]; + end + end + end + end + end else begin + if (dll_en) + if(diff_ck) + out_delay = ($rtoi(tch_avg) > 50000) ? 0 : $rtoi(tch_avg); + else + out_delay = ($rtoi(tcl_avg) > 50000) ? 0 : $rtoi(tcl_avg); + else + if(diff_ck) + out_delay = ($rtoi(tch_avg) > 50000) ? 0 : $rtoi(tch_avg) + TDQSCK_DLLDIS; + else + out_delay = ($rtoi(tcl_avg) > 50000) ? 0 : $rtoi(tcl_avg) + TDQSCK_DLLDIS; + dqs_out_en_dly <= #(out_delay) {DQS_BITS{dqs_out_en}}; + dqs_out_dly <= #(out_delay) {DQS_BITS{dqs_out }}; + if (write_levelization !== 1'b1) begin + dq_out_en_dly <= #(out_delay) {DQ_BITS {dq_out_en }}; + dq_out_dly <= #(out_delay) {DQ_BITS {dq_out }}; + end + end + end + endtask + + always @ (posedge rst_n_in) begin : reset + integer i; + if (rst_n_in) begin +// if ($time < 200000000 && check_strict_timing) +// $display ("%m at time %t WARNING: 200 us is required before RST_N goes inactive.", $time); + if ($time < (SIMUL_200US * 1000000) && check_strict_timing) + $display ("%m at time %t WARNING: %d (actually 200) us is required before RST_N goes inactive.", $time, SIMUL_200US); + + if (cke_in !== 1'b0) + $display ("%m: at time %t ERROR: CKE must be inactive when RST_N goes inactive.", $time); + if ($time - tm_cke < 10000) + $display ("%m: at time %t ERROR: CKE must be maintained inactive for 10 ns before RST_N goes inactive.", $time); + + // clear memory +`ifdef MAX_MEM + // verification group does not erase memory + // for (banki = 0; banki < `BANKS; banki = banki + 1) begin + // $fclose(memfd[banki]); + // memfd[banki] = open_bank_file(banki); + // end +`else + memory_used <= 0; //erase memory +`endif + + end + end + + always @(negedge rst_n_in or posedge diff_ck or negedge diff_ck) begin : main + integer i; + if (!rst_n_in) begin + reset_task; + end else begin + if (!in_self_refresh && (diff_ck !== 1'b0) && (diff_ck !== 1'b1)) + $display ("%m: at time %t ERROR: CK and CK_N are not allowed to go to an unknown state.", $time); + data_task; + + // Clock Frequency Change is legal: + // 1.) During Self Refresh + // 2.) During Precharge Power Down (DLL on or off) + if (in_self_refresh || (in_power_down && (active_bank == 0))) begin + if (diff_ck) begin + tjit_per_rtime = $time - tm_ck_pos - tck_avg; + end else begin + tjit_per_rtime = $time - tm_ck_neg - tck_avg; + end + if (dll_locked && (abs_value(tjit_per_rtime) > TJIT_PER)) begin + if ((tm_ck_pos - tm_cke_cmd < TCKSRE) || (ck_cntr - ck_cke_cmd < TCKSRE_TCK)) + $display ("%m: at time %t ERROR: tCKSRE violation during Self Refresh or Precharge Power Down Entry", $time); + if (odt_state) begin + $display ("%m: at time %t ERROR: Clock Frequency Change Failure. ODT must be off prior to Clock Frequency Change.", $time); + if (STOP_ON_ERROR) $stop(0); + end else begin + if (DEBUG) $display ("%m: at time %t INFO: Clock Frequency Change detected. DLL Reset is Required.", $time); + tm_freq_change <= $time; + ck_freq_change <= ck_cntr; + dll_locked = 0; + end + end + end + + if (diff_ck) begin + // check setup of command signals + if ($time > TIS) begin + if ($time - tm_cke < TIS) + $display ("%m: at time %t ERROR: tIS violation on CKE by %t", $time, tm_cke + TIS - $time); + if (cke_in) begin + for (i=0; i<23; i=i+1) begin + if ($time - tm_cmd_addr[i] < TIS) + $display ("%m: at time %t ERROR: tIS violation on %s by %t", $time, cmd_addr_string[i], tm_cmd_addr[i] + TIS - $time); + end + end + end + + // update current state + if (dll_locked) begin + if (mr_chk == 0) begin + mr_chk = 1; + end else if (init_mode_reg[0] && (mr_chk == 1)) begin + // check CL value against the clock frequency + if (cas_latency*tck_avg < CL_TIME && check_strict_timing) + $display ("%m: at time %t ERROR: CAS Latency = %d is illegal @tCK(avg) = %f", $time, cas_latency, tck_avg); + // check WR value against the clock frequency + if (ceil(write_recovery*tck_avg) < TWR) + $display ("%m: at time %t ERROR: Write Recovery = %d is illegal @tCK(avg) = %f", $time, write_recovery, tck_avg); + // check the CWL value against the clock frequency + if (check_strict_timing) begin + case (cas_write_latency) + 5 : if (tck_avg < 2500.0) $display ("%m: at time %t ERROR: CWL = %d is illegal @tCK(avg) = %f", $time, cas_write_latency, tck_avg); + 6 : if ((tck_avg < 1875.0) || (tck_avg >= 2500.0)) $display ("%m: at time %t ERROR: CWL = %d is illegal @tCK(avg) = %f", $time, cas_write_latency, tck_avg); + 7 : if ((tck_avg < 1500.0) || (tck_avg >= 1875.0)) $display ("%m: at time %t ERROR: CWL = %d is illegal @tCK(avg) = %f", $time, cas_write_latency, tck_avg); + 8 : if ((tck_avg < 1250.0) || (tck_avg >= 1500.0)) $display ("%m: at time %t ERROR: CWL = %d is illegal @tCK(avg) = %f", $time, cas_write_latency, tck_avg); + 9 : if ((tck_avg < 15e3/14) || (tck_avg >= 1250.0)) $display ("%m: at time %t ERROR: CWL = %d is illegal @tCK(avg) = %f", $time, cas_write_latency, tck_avg); + 10: if ((tck_avg < 937.5) || (tck_avg >= 15e3/14)) $display ("%m: at time %t ERROR: CWL = %d is illegal @tCK(avg) = %f", $time, cas_write_latency, tck_avg); + default : $display ("%m: at time %t ERROR: CWL = %d is illegal @tCK(avg) = %f", $time, cas_write_latency, tck_avg); + endcase + // check the CL value against the clock frequency + if (!valid_cl(cas_latency, cas_write_latency)) + $display ("%m: at time %t ERROR: CAS Latency = %d is not valid when CAS Write Latency = %d", $time, cas_latency, cas_write_latency); + end + mr_chk = 2; + end + end else if (!in_self_refresh) begin + mr_chk = 0; + if (ck_cntr - ck_dll_reset == TDLLK) begin + dll_locked = 1; + end + end + + if (|auto_precharge_bank) begin + for (i=0; i<`BANKS; i=i+1) begin + // Write with Auto Precharge Calculation + // 1. Meet minimum tRAS requirement + // 2. Write Latency PLUS BL/2 cycles PLUS WR after Write command + if (write_precharge_bank[i]) begin + if ($time - tm_bank_activate[i] >= TRAS_MIN) begin + if (ck_cntr - ck_bank_write[i] >= write_latency + burst_length/2 + write_recovery) begin + if (DEBUG) $display ("%m: at time %t INFO: Auto Precharge bank %d", $time, i); + write_precharge_bank[i] = 0; + active_bank[i] = 0; + auto_precharge_bank[i] = 0; + tm_bank_precharge[i] = $time; + tm_precharge = $time; + ck_precharge = ck_cntr; + end + end + end + // Read with Auto Precharge Calculation + // 1. Meet minimum tRAS requirement + // 2. Additive Latency plus 4 cycles after Read command + // 3. tRTP after the last 8-bit prefetch + if (read_precharge_bank[i]) begin + if (($time - tm_bank_activate[i] >= TRAS_MIN) && (ck_cntr - ck_bank_read[i] >= additive_latency + TRTP_TCK)) begin + read_precharge_bank[i] = 0; + // In case the internal precharge is pushed out by tRTP, tRP starts at the point where + // the internal precharge happens (not at the next rising clock edge after this event). + if ($time - tm_bank_read_end[i] < TRTP) begin + if (DEBUG) $display ("%m: at time %t INFO: Auto Precharge bank %d", tm_bank_read_end[i] + TRTP, i); + active_bank[i] <= #(tm_bank_read_end[i] + TRTP - $time) 0; + auto_precharge_bank[i] <= #(tm_bank_read_end[i] + TRTP - $time) 0; + tm_bank_precharge[i] <= #(tm_bank_read_end[i] + TRTP - $time) tm_bank_read_end[i] + TRTP; + tm_precharge <= #(tm_bank_read_end[i] + TRTP - $time) tm_bank_read_end[i] + TRTP; + ck_precharge = ck_cntr; + end else begin + if (DEBUG) $display ("%m: at time %t INFO: Auto Precharge bank %d", $time, i); + active_bank[i] = 0; + auto_precharge_bank[i] = 0; + tm_bank_precharge[i] = $time; + tm_precharge = $time; + ck_precharge = ck_cntr; + end + end + end + end + end + + + // respond to incoming command + if (cke_in ^ prev_cke) begin + tm_cke_cmd <= $time; + ck_cke_cmd <= ck_cntr; + end + + + cmd_task(prev_cke, cke_in, cmd_n_in, ba_in, addr_in); + if ((cmd_n_in == WRITE) || (cmd_n_in == READ)) begin + al_pipeline[2*additive_latency] = 1'b1; + end + if (al_pipeline[0]) begin + // check tRCD after additive latency + if ((rd_pipeline[2*cas_latency - 1]) && ($time - tm_bank_activate[ba_pipeline[2*cas_latency - 1]] < TRCD)) + $display ("%m: at time %t ERROR: tRCD violation during %s", $time, cmd_string[READ]); + if ((wr_pipeline[2*cas_write_latency + 1]) && ($time - tm_bank_activate[ba_pipeline[2*cas_write_latency + 1]] < TRCD)) + $display ("%m: at time %t ERROR: tRCD violation during %s", $time, cmd_string[WRITE]); + // check tWTR after additive latency + if (rd_pipeline[2*cas_latency - 1]) begin //{ + if (truebl4) begin //{ + i = ba_pipeline[2*cas_latency - 1]; + if ($time - tm_group_write_end[i[1]] < TWTR) + $display ("%m: at time %t ERROR: tWTR violation during %s", $time, cmd_string[READ]); + if ($time - tm_write_end < TWTR_DG) + $display ("%m: at time %t ERROR: tWTR_DG violation during %s", $time, cmd_string[READ]); + end else begin + if ($time - tm_write_end < TWTR) + $display ("%m: at time %t ERROR: tWTR violation during %s", $time, cmd_string[READ]); + end + end + end + if (rd_pipeline) begin + if (rd_pipeline[2*cas_latency - 1]) begin + tm_bank_read_end[ba_pipeline[2*cas_latency - 1]] <= $time; + end + end + for (i=0; i<`BANKS; i=i+1) begin + if ((ck_cntr - ck_bank_write[i] > write_latency) && (ck_cntr - ck_bank_write[i] <= write_latency + burst_length/2)) begin + tm_bank_write_end[i] <= $time; + tm_group_write_end[i[1]] <= $time; + tm_write_end <= $time; + end + end + + // clk pin is disabled during self refresh + if (!in_self_refresh && tm_ck_pos ) begin + tjit_cc_time = $time - tm_ck_pos - tck_i; + tck_i = $time - tm_ck_pos; + tck_avg = tck_avg - tck_sample[ck_cntr%PERTCKAVG]/$itor(PERTCKAVG); + tck_avg = tck_avg + tck_i/$itor(PERTCKAVG); + tck_sample[ck_cntr%PERTCKAVG] = tck_i; + tjit_per_rtime = tck_i - tck_avg; + + if (dll_locked && check_strict_timing) begin + // check accumulated error + terr_nper_rtime = 0; + for (i=0; i<12; i=i+1) begin + terr_nper_rtime = terr_nper_rtime + tck_sample[i] - tck_avg; + terr_nper_rtime = abs_value(terr_nper_rtime); + case (i) + 0 :; + 1 : if (terr_nper_rtime - TERR_2PER >= 1.0) $display ("%m: at time %t ERROR: tERR(2per) violation by %f ps.", $time, terr_nper_rtime - TERR_2PER); + 2 : if (terr_nper_rtime - TERR_3PER >= 1.0) $display ("%m: at time %t ERROR: tERR(3per) violation by %f ps.", $time, terr_nper_rtime - TERR_3PER); + 3 : if (terr_nper_rtime - TERR_4PER >= 1.0) $display ("%m: at time %t ERROR: tERR(4per) violation by %f ps.", $time, terr_nper_rtime - TERR_4PER); + 4 : if (terr_nper_rtime - TERR_5PER >= 1.0) $display ("%m: at time %t ERROR: tERR(5per) violation by %f ps.", $time, terr_nper_rtime - TERR_5PER); + 5 : if (terr_nper_rtime - TERR_6PER >= 1.0) $display ("%m: at time %t ERROR: tERR(6per) violation by %f ps.", $time, terr_nper_rtime - TERR_6PER); + 6 : if (terr_nper_rtime - TERR_7PER >= 1.0) $display ("%m: at time %t ERROR: tERR(7per) violation by %f ps.", $time, terr_nper_rtime - TERR_7PER); + 7 : if (terr_nper_rtime - TERR_8PER >= 1.0) $display ("%m: at time %t ERROR: tERR(8per) violation by %f ps.", $time, terr_nper_rtime - TERR_8PER); + 8 : if (terr_nper_rtime - TERR_9PER >= 1.0) $display ("%m: at time %t ERROR: tERR(9per) violation by %f ps.", $time, terr_nper_rtime - TERR_9PER); + 9 : if (terr_nper_rtime - TERR_10PER >= 1.0) $display ("%m: at time %t ERROR: tERR(10per) violation by %f ps.", $time, terr_nper_rtime - TERR_10PER); + 10 : if (terr_nper_rtime - TERR_11PER >= 1.0) $display ("%m: at time %t ERROR: tERR(11per) violation by %f ps.", $time, terr_nper_rtime - TERR_11PER); + 11 : if (terr_nper_rtime - TERR_12PER >= 1.0) $display ("%m: at time %t ERROR: tERR(12per) violation by %f ps.", $time, terr_nper_rtime - TERR_12PER); + endcase + end + + // check tCK min/max/jitter + if (abs_value(tjit_per_rtime) - TJIT_PER >= 1.0) + $display ("%m: at time %t ERROR: tJIT(per) violation by %f ps.", $time, abs_value(tjit_per_rtime) - TJIT_PER); + if (abs_value(tjit_cc_time) - TJIT_CC >= 1.0) + $display ("%m: at time %t ERROR: tJIT(cc) violation by %f ps.", $time, abs_value(tjit_cc_time) - TJIT_CC); + if (TCK_MIN - tck_avg >= 1.0) + $display ("%m: at time %t ERROR: tCK(avg) minimum violation by %f ps.", $time, TCK_MIN - tck_avg); + if (tck_avg - TCK_MAX >= 1.0) + $display ("%m: at time %t ERROR: tCK(avg) maximum violation by %f ps.", $time, tck_avg - TCK_MAX); + + // check tCL +`ifdef CVC + if ((tm_ck_neg - $time < TCL_ABS_MIN*tck_avg) && (tm_ck_neg > $time)) +`else + if (tm_ck_neg - $time < TCL_ABS_MIN*tck_avg) +`endif + $display ("%m: at time %t ERROR: tCL(abs) minimum violation on CLK by %t", $time, TCL_ABS_MIN*tck_avg - tm_ck_neg + $time); + if (tcl_avg < TCL_AVG_MIN*tck_avg) + $display ("%m: at time %t ERROR: tCL(avg) minimum violation on CLK by %t", $time, TCL_AVG_MIN*tck_avg - tcl_avg); + if (tcl_avg > TCL_AVG_MAX*tck_avg) + $display ("%m: at time %t ERROR: tCL(avg) maximum violation on CLK by %t", $time, tcl_avg - TCL_AVG_MAX*tck_avg); + end + + // calculate the tch avg jitter + tch_avg = tch_avg - tch_sample[ck_cntr%TDLLK]/$itor(TDLLK); + tch_avg = tch_avg + tch_i/$itor(TDLLK); + tch_sample[ck_cntr%TDLLK] = tch_i; + tjit_ch_rtime = tch_i - tch_avg; + duty_cycle = tch_avg/tck_avg; + + // update timers/counters + tcl_i <= $time - tm_ck_neg; + end + + prev_odt <= odt_in; + // update timers/counters + ck_cntr <= ck_cntr + 1; + tm_ck_pos = $time; + end else begin + // clk pin is disabled during self refresh + if (!in_self_refresh) begin + if (dll_locked && check_strict_timing) begin + if ($time - tm_ck_pos < TCH_ABS_MIN*tck_avg) + $display ("%m: at time %t ERROR: tCH(abs) minimum violation on CLK by %t", $time, TCH_ABS_MIN*tck_avg - $time + tm_ck_pos); + if (tch_avg < TCH_AVG_MIN*tck_avg) + $display ("%m: at time %t ERROR: tCH(avg) minimum violation on CLK by %t", $time, TCH_AVG_MIN*tck_avg - tch_avg); + if (tch_avg > TCH_AVG_MAX*tck_avg) + $display ("%m: at time %t ERROR: tCH(avg) maximum violation on CLK by %t", $time, tch_avg - TCH_AVG_MAX*tck_avg); + end + + // calculate the tcl avg jitter + tcl_avg = tcl_avg - tcl_sample[ck_cntr%TDLLK]/$itor(TDLLK); + tcl_avg = tcl_avg + tcl_i/$itor(TDLLK); + tcl_sample[ck_cntr%TDLLK] = tcl_i; + + // update timers/counters + tch_i <= $time - tm_ck_pos; + end + tm_ck_neg = $time; + end + + // on die termination + if (odt_en || dyn_odt_en) begin + // odt pin is disabled during self refresh + if (!in_self_refresh && diff_ck) begin + if ($time - tm_odt < TIS) + $display ("%m: at time %t ERROR: tIS violation on ODT by %t", $time, tm_odt + TIS - $time); + if (prev_odt ^ odt_in) begin + if (!dll_locked) + $display ("%m: at time %t WARNING: tDLLK violation during ODT transition.", $time); + if (($time - tm_load_mode < TMOD) || (ck_cntr - ck_load_mode < TMOD_TCK)) + $display ("%m: at time %t ERROR: tMOD violation during ODT transition", $time); + if (ck_cntr - ck_zqinit < TZQINIT) + $display ("%m: at time %t ERROR: TZQinit violation during ODT transition", $time); + if (ck_cntr - ck_zqoper < TZQOPER) + $display ("%m: at time %t ERROR: TZQoper violation during ODT transition", $time); + if (ck_cntr - ck_zqcs < TZQCS) + $display ("%m: at time %t ERROR: tZQcs violation during ODT transition", $time); + // if (($time - tm_slow_exit_pd < TXPDLL) || (ck_cntr - ck_slow_exit_pd < TXPDLL_TCK)) + // $display ("%m: at time %t ERROR: tXPDLL violation during ODT transition", $time); + if (ck_cntr - ck_self_refresh < TXSDLL) + $display ("%m: at time %t ERROR: tXSDLL violation during ODT transition", $time); + if (in_self_refresh) + $display ("%m: at time %t ERROR: Illegal ODT transition during Self Refresh.", $time); + if (!odt_in && (ck_cntr - ck_odt < ODTH4)) + $display ("%m: at time %t ERROR: ODTH4 violation during ODT transition", $time); + if (!odt_in && (ck_cntr - ck_odth8 < ODTH8)) + $display ("%m: at time %t ERROR: ODTH8 violation during ODT transition", $time); + if (($time - tm_slow_exit_pd < TXPDLL) || (ck_cntr - ck_slow_exit_pd < TXPDLL_TCK)) + $display ("%m: at time %t WARNING: tXPDLL during ODT transition. Synchronous or asynchronous change in termination resistance is possible.", $time); + + // async ODT mode applies: + // 1.) during precharge power down with DLL off + // 2.) if tANPD has not been satisfied + // 3.) until tXPDLL has been satisfied + if ((in_power_down && low_power && (active_bank == 0)) || ($time - tm_slow_exit_pd < TXPDLL) || (ck_cntr - ck_slow_exit_pd < TXPDLL_TCK)) begin + odt_state = odt_in; + if (DEBUG && odt_en) $display ("%m: at time %t INFO: Async On Die Termination Rtt_NOM = %d Ohm", $time, {32{odt_state}} & get_rtt_nom(odt_rtt_nom)); + if (odt_state) begin + odt_state_dly <= #(TAONPD) odt_state; + end else begin + odt_state_dly <= #(TAOFPD) odt_state; + end + // sync ODT mode applies: + // 1.) during normal operation + // 2.) during active power down + // 3.) during precharge power down with DLL on + end else begin + odt_pipeline[2*(write_latency - 2)] = 1'b1; // ODTLon, ODTLoff + end + ck_odt <= ck_cntr; + end + end + if (odt_pipeline[0]) begin + odt_state = ~odt_state; + if (DEBUG && odt_en) $display ("%m: at time %t INFO: Sync On Die Termination Rtt_NOM = %d Ohm", $time, {32{odt_state}} & get_rtt_nom(odt_rtt_nom)); + if (odt_state) begin + odt_state_dly <= #(TAON) odt_state; + end else begin + odt_state_dly <= #(TAOF*tck_avg) odt_state; + end + end + if (rd_pipeline[RDQSEN_PRE]) begin + odt_cntr = 1 + RDQSEN_PRE + bl_pipeline[RDQSEN_PRE] + RDQSEN_PST - 1; + end + if (odt_cntr > 0) begin + if ((get_rtt_nom(odt_rtt_nom) > 0) && odt_state) begin + $display ("%m: at time %t ERROR: On Die Termination must be OFF during Read data transfer.", $time); + end + odt_cntr = odt_cntr - 1; + end + if (dyn_odt_en && ( odt_state || feature_odt_hi) ) begin + if (DEBUG && (dyn_odt_state ^ dyn_odt_pipeline[0])) + $display ("%m: at time %t INFO: Sync On Die Termination Rtt_WR = %d Ohm", $time, {32{dyn_odt_pipeline[0]}} & get_rtt_wr(odt_rtt_wr)); + dyn_odt_state = dyn_odt_pipeline[0]; + end + dyn_odt_state_dly <= #(TADC*tck_avg) dyn_odt_state; + end + + if (cke_in && write_levelization) begin + for (i=0; i>1; + wr_pipeline = wr_pipeline>>1; + rd_pipeline = rd_pipeline>>1; + for (i=0; i<`MAX_PIPE; i=i+1) begin + bl_pipeline[i] = bl_pipeline[i+1]; + ba_pipeline[i] = ba_pipeline[i+1]; + row_pipeline[i] = row_pipeline[i+1]; + col_pipeline[i] = col_pipeline[i+1]; + end + end + if (|odt_pipeline || |dyn_odt_pipeline) begin + odt_pipeline = odt_pipeline>>1; + dyn_odt_pipeline = dyn_odt_pipeline>>1; + end + end + end + + // receiver(s) + task dqs_even_receiver; + input [4:0] i; + reg [127:0] bit_mask; + begin + bit_mask = {`DQ_PER_DQS{1'b1}}<<(i*`DQ_PER_DQS); + if (dqs_even[i]) begin + if (tdqs_en) begin // tdqs disables dm + dm_in_pos[i] = 1'b0; + end else begin + dm_in_pos[i] = dm_in[i]; + end + dq_in_pos = (dq_in & bit_mask) | (dq_in_pos & ~bit_mask); + end + end + endtask + + always @(posedge dqs_even[ 0]) dqs_even_receiver( 0); + always @(posedge dqs_even[ 1]) dqs_even_receiver( 1); + always @(posedge dqs_even[ 2]) dqs_even_receiver( 2); + always @(posedge dqs_even[ 3]) dqs_even_receiver( 3); + always @(posedge dqs_even[ 4]) dqs_even_receiver( 4); + always @(posedge dqs_even[ 5]) dqs_even_receiver( 5); + always @(posedge dqs_even[ 6]) dqs_even_receiver( 6); + always @(posedge dqs_even[ 7]) dqs_even_receiver( 7); + always @(posedge dqs_even[ 8]) dqs_even_receiver( 8); + always @(posedge dqs_even[ 9]) dqs_even_receiver( 9); + always @(posedge dqs_even[10]) dqs_even_receiver(10); + always @(posedge dqs_even[11]) dqs_even_receiver(11); + always @(posedge dqs_even[12]) dqs_even_receiver(12); + always @(posedge dqs_even[13]) dqs_even_receiver(13); + always @(posedge dqs_even[14]) dqs_even_receiver(14); + always @(posedge dqs_even[15]) dqs_even_receiver(15); + + task dqs_odd_receiver; + input [4:0] i; + reg [127:0] bit_mask; + begin + bit_mask = {`DQ_PER_DQS{1'b1}}<<(i*`DQ_PER_DQS); + if (dqs_odd[i]) begin + if (tdqs_en) begin // tdqs disables dm + dm_in_neg[i] = 1'b0; + end else begin + dm_in_neg[i] = dm_in[i]; + end + dq_in_neg = (dq_in & bit_mask) | (dq_in_neg & ~bit_mask); + end + end + endtask + + always @(posedge dqs_odd[ 0]) dqs_odd_receiver( 0); + always @(posedge dqs_odd[ 1]) dqs_odd_receiver( 1); + always @(posedge dqs_odd[ 2]) dqs_odd_receiver( 2); + always @(posedge dqs_odd[ 3]) dqs_odd_receiver( 3); + always @(posedge dqs_odd[ 4]) dqs_odd_receiver( 4); + always @(posedge dqs_odd[ 5]) dqs_odd_receiver( 5); + always @(posedge dqs_odd[ 6]) dqs_odd_receiver( 6); + always @(posedge dqs_odd[ 7]) dqs_odd_receiver( 7); + always @(posedge dqs_odd[ 8]) dqs_odd_receiver( 8); + always @(posedge dqs_odd[ 9]) dqs_odd_receiver( 9); + always @(posedge dqs_odd[10]) dqs_odd_receiver(10); + always @(posedge dqs_odd[11]) dqs_odd_receiver(11); + always @(posedge dqs_odd[12]) dqs_odd_receiver(12); + always @(posedge dqs_odd[13]) dqs_odd_receiver(13); + always @(posedge dqs_odd[14]) dqs_odd_receiver(14); + always @(posedge dqs_odd[15]) dqs_odd_receiver(15); + + // Processes to check hold and pulse width of control signals + always @(posedge rst_n_in) begin + if ($time > 100000) begin + if (tm_rst_n + 100000 > $time) + $display ("%m: at time %t ERROR: RST_N pulse width violation by %t", $time, tm_rst_n + 100000 - $time); + end + tm_rst_n = $time; + end + always @(cke_in) begin + if (rst_n_in) begin + if ($time > TIH) begin + if ($time - tm_ck_pos < TIH) + $display ("%m: at time %t ERROR: tIH violation on CKE by %t", $time, tm_ck_pos + TIH - $time); + end + if ($time - tm_cke < TIPW) + $display ("%m: at time %t ERROR: tIPW violation on CKE by %t", $time, tm_cke + TIPW - $time); + end + tm_cke = $time; + end + always @(odt_in) begin + if (rst_n_in && odt_en && !in_self_refresh) begin + if ($time - tm_ck_pos < TIH) + $display ("%m: at time %t ERROR: tIH violation on ODT by %t", $time, tm_ck_pos + TIH - $time); + if ($time - tm_odt < TIPW) + $display ("%m: at time %t ERROR: tIPW violation on ODT by %t", $time, tm_odt + TIPW - $time); + end + tm_odt = $time; + end + + task cmd_addr_timing_check; + input i; + reg [4:0] i; + begin + if (rst_n_in && prev_cke) begin + if ((i == 0) && ($time - tm_ck_pos < TIH)) // always check tIH for CS# + $display ("%m: at time %t ERROR: tIH violation on %s by %t", $time, cmd_addr_string[i], tm_ck_pos + TIH - $time); + if ((i > 0) && (cs_n_in == 0) &&($time - tm_ck_pos < TIH)) // Only check tIH for cmd_addr if CS# is low + $display ("%m: at time %t ERROR: tIH violation on %s by %t", $time, cmd_addr_string[i], tm_ck_pos + TIH - $time); + if ((i == 0) && ($time - tm_cmd_addr[i] < TIPW)) // always check tIPW for CS# + $display ("%m: at time %t ERROR: tIPW violation on %s by %t", $time, cmd_addr_string[i], tm_cmd_addr[i] + TIPW - $time); + if ((i > 0) && (cs_n_in == 0) && ($time - tm_cmd_addr[i] < TIPW)) + $display ("%m: at time %t ERROR: tIPW violation on %s by %t", $time, cmd_addr_string[i], tm_cmd_addr[i] + TIPW - $time); + end + tm_cmd_addr[i] = $time; + end + endtask + + always @(cs_n_in ) cmd_addr_timing_check( 0); + always @(ras_n_in ) cmd_addr_timing_check( 1); + always @(cas_n_in ) cmd_addr_timing_check( 2); + always @(we_n_in ) cmd_addr_timing_check( 3); + always @(ba_in [ 0]) cmd_addr_timing_check( 4); + always @(ba_in [ 1]) cmd_addr_timing_check( 5); + always @(ba_in [ 2]) cmd_addr_timing_check( 6); + always @(addr_in[ 0]) cmd_addr_timing_check( 7); + always @(addr_in[ 1]) cmd_addr_timing_check( 8); + always @(addr_in[ 2]) cmd_addr_timing_check( 9); + always @(addr_in[ 3]) cmd_addr_timing_check(10); + always @(addr_in[ 4]) cmd_addr_timing_check(11); + always @(addr_in[ 5]) cmd_addr_timing_check(12); + always @(addr_in[ 6]) cmd_addr_timing_check(13); + always @(addr_in[ 7]) cmd_addr_timing_check(14); + always @(addr_in[ 8]) cmd_addr_timing_check(15); + always @(addr_in[ 9]) cmd_addr_timing_check(16); + always @(addr_in[10]) cmd_addr_timing_check(17); + always @(addr_in[11]) cmd_addr_timing_check(18); + always @(addr_in[12]) cmd_addr_timing_check(19); + always @(addr_in[13]) cmd_addr_timing_check(20); + always @(addr_in[14]) cmd_addr_timing_check(21); + always @(addr_in[15]) cmd_addr_timing_check(22); + always @(addr_in[16]) cmd_addr_timing_check(23); + + // Processes to check setup and hold of data signals + task dm_timing_check; + input i; + reg [4:0] i; + begin + if (dqs_in_valid) begin + if ($time - tm_dqs[i] < TDH) + $display ("%m: at time %t ERROR: tDH violation on DM bit %d by %t", $time, i, tm_dqs[i] + TDH - $time); + if (check_dm_tdipw[i]) begin + if ($time - tm_dm[i] < TDIPW) + $display ("%m: at time %t ERROR: tDIPW violation on DM bit %d by %t", $time, i, tm_dm[i] + TDIPW - $time); + end + end + check_dm_tdipw[i] <= 1'b0; + tm_dm[i] = $time; + end + endtask + + always @(dm_in[ 0]) dm_timing_check( 0); + always @(dm_in[ 1]) dm_timing_check( 1); + always @(dm_in[ 2]) dm_timing_check( 2); + always @(dm_in[ 3]) dm_timing_check( 3); + always @(dm_in[ 4]) dm_timing_check( 4); + always @(dm_in[ 5]) dm_timing_check( 5); + always @(dm_in[ 6]) dm_timing_check( 6); + always @(dm_in[ 7]) dm_timing_check( 7); + always @(dm_in[ 8]) dm_timing_check( 8); + always @(dm_in[ 9]) dm_timing_check( 9); + always @(dm_in[10]) dm_timing_check(10); + always @(dm_in[11]) dm_timing_check(11); + always @(dm_in[12]) dm_timing_check(12); + always @(dm_in[13]) dm_timing_check(13); + always @(dm_in[14]) dm_timing_check(14); + always @(dm_in[15]) dm_timing_check(15); + + always @(dm_in[16]) dm_timing_check(16); + always @(dm_in[17]) dm_timing_check(17); + always @(dm_in[18]) dm_timing_check(18); + always @(dm_in[19]) dm_timing_check(19); + always @(dm_in[20]) dm_timing_check(20); + always @(dm_in[21]) dm_timing_check(21); + always @(dm_in[22]) dm_timing_check(22); + always @(dm_in[23]) dm_timing_check(23); + always @(dm_in[24]) dm_timing_check(24); + always @(dm_in[25]) dm_timing_check(25); + always @(dm_in[26]) dm_timing_check(26); + always @(dm_in[27]) dm_timing_check(27); + always @(dm_in[28]) dm_timing_check(28); + always @(dm_in[29]) dm_timing_check(29); + always @(dm_in[30]) dm_timing_check(30); + always @(dm_in[31]) dm_timing_check(31); + + task dq_timing_check; + input i; + reg [6:0] i; + begin + if (dqs_in_valid) begin + if ($time - tm_dqs[i/(`DQ_PER_DQS)] < TDH) + $display ("%m: at time %t ERROR: tDH violation on DQ bit %d by %t", $time, i, tm_dqs[i/`DQ_PER_DQS] + TDH - $time); + if (check_dq_tdipw[i]) begin + if ($time - tm_dq[i] < TDIPW) + $display ("%m: at time %t ERROR: tDIPW violation on DQ bit %d by %t", $time, i, tm_dq[i] + TDIPW - $time); + end + end + check_dq_tdipw[i] <= 1'b0; + tm_dq[i] = $time; + end + endtask + + always @(dq_in[ 0]) dq_timing_check( 0); + always @(dq_in[ 1]) dq_timing_check( 1); + always @(dq_in[ 2]) dq_timing_check( 2); + always @(dq_in[ 3]) dq_timing_check( 3); + always @(dq_in[ 4]) dq_timing_check( 4); + always @(dq_in[ 5]) dq_timing_check( 5); + always @(dq_in[ 6]) dq_timing_check( 6); + always @(dq_in[ 7]) dq_timing_check( 7); + always @(dq_in[ 8]) dq_timing_check( 8); + always @(dq_in[ 9]) dq_timing_check( 9); + always @(dq_in[10]) dq_timing_check(10); + always @(dq_in[11]) dq_timing_check(11); + always @(dq_in[12]) dq_timing_check(12); + always @(dq_in[13]) dq_timing_check(13); + always @(dq_in[14]) dq_timing_check(14); + always @(dq_in[15]) dq_timing_check(15); + always @(dq_in[16]) dq_timing_check(16); + always @(dq_in[17]) dq_timing_check(17); + always @(dq_in[18]) dq_timing_check(18); + always @(dq_in[19]) dq_timing_check(19); + always @(dq_in[20]) dq_timing_check(20); + always @(dq_in[21]) dq_timing_check(21); + always @(dq_in[22]) dq_timing_check(22); + always @(dq_in[23]) dq_timing_check(23); + always @(dq_in[24]) dq_timing_check(24); + always @(dq_in[25]) dq_timing_check(25); + always @(dq_in[26]) dq_timing_check(26); + always @(dq_in[27]) dq_timing_check(27); + always @(dq_in[28]) dq_timing_check(28); + always @(dq_in[29]) dq_timing_check(29); + always @(dq_in[30]) dq_timing_check(30); + always @(dq_in[31]) dq_timing_check(31); + always @(dq_in[32]) dq_timing_check(32); + always @(dq_in[33]) dq_timing_check(33); + always @(dq_in[34]) dq_timing_check(34); + always @(dq_in[35]) dq_timing_check(35); + always @(dq_in[36]) dq_timing_check(36); + always @(dq_in[37]) dq_timing_check(37); + always @(dq_in[38]) dq_timing_check(38); + always @(dq_in[39]) dq_timing_check(39); + always @(dq_in[40]) dq_timing_check(40); + always @(dq_in[41]) dq_timing_check(41); + always @(dq_in[42]) dq_timing_check(42); + always @(dq_in[43]) dq_timing_check(43); + always @(dq_in[44]) dq_timing_check(44); + always @(dq_in[45]) dq_timing_check(45); + always @(dq_in[46]) dq_timing_check(46); + always @(dq_in[47]) dq_timing_check(47); + always @(dq_in[48]) dq_timing_check(48); + always @(dq_in[49]) dq_timing_check(49); + always @(dq_in[50]) dq_timing_check(50); + always @(dq_in[51]) dq_timing_check(51); + always @(dq_in[52]) dq_timing_check(52); + always @(dq_in[53]) dq_timing_check(53); + always @(dq_in[54]) dq_timing_check(54); + always @(dq_in[55]) dq_timing_check(55); + always @(dq_in[56]) dq_timing_check(56); + always @(dq_in[57]) dq_timing_check(57); + always @(dq_in[58]) dq_timing_check(58); + always @(dq_in[59]) dq_timing_check(59); + always @(dq_in[60]) dq_timing_check(60); + always @(dq_in[61]) dq_timing_check(61); + always @(dq_in[62]) dq_timing_check(62); + always @(dq_in[63]) dq_timing_check(63); + + always @(dq_in[64]) dq_timing_check(64); + always @(dq_in[65]) dq_timing_check(65); + always @(dq_in[66]) dq_timing_check(66); + always @(dq_in[67]) dq_timing_check(67); + always @(dq_in[68]) dq_timing_check(68); + always @(dq_in[69]) dq_timing_check(69); + always @(dq_in[70]) dq_timing_check(70); + always @(dq_in[71]) dq_timing_check(71); + always @(dq_in[72]) dq_timing_check(72); + always @(dq_in[73]) dq_timing_check(73); + always @(dq_in[74]) dq_timing_check(74); + always @(dq_in[75]) dq_timing_check(75); + always @(dq_in[76]) dq_timing_check(76); + always @(dq_in[77]) dq_timing_check(77); + always @(dq_in[78]) dq_timing_check(78); + always @(dq_in[79]) dq_timing_check(79); + always @(dq_in[80]) dq_timing_check(80); + always @(dq_in[81]) dq_timing_check(81); + always @(dq_in[82]) dq_timing_check(82); + always @(dq_in[83]) dq_timing_check(83); + always @(dq_in[84]) dq_timing_check(84); + always @(dq_in[85]) dq_timing_check(85); + always @(dq_in[86]) dq_timing_check(86); + always @(dq_in[87]) dq_timing_check(87); + always @(dq_in[88]) dq_timing_check(88); + always @(dq_in[89]) dq_timing_check(89); + always @(dq_in[90]) dq_timing_check(90); + always @(dq_in[91]) dq_timing_check(91); + always @(dq_in[92]) dq_timing_check(92); + always @(dq_in[93]) dq_timing_check(93); + always @(dq_in[94]) dq_timing_check(94); + always @(dq_in[95]) dq_timing_check(95); + always @(dq_in[96]) dq_timing_check(96); + always @(dq_in[97]) dq_timing_check(97); + always @(dq_in[98]) dq_timing_check(98); + always @(dq_in[99]) dq_timing_check(99); + always @(dq_in[100]) dq_timing_check(100); + always @(dq_in[101]) dq_timing_check(101); + always @(dq_in[102]) dq_timing_check(102); + always @(dq_in[103]) dq_timing_check(103); + always @(dq_in[104]) dq_timing_check(104); + always @(dq_in[105]) dq_timing_check(105); + always @(dq_in[106]) dq_timing_check(106); + always @(dq_in[107]) dq_timing_check(107); + always @(dq_in[108]) dq_timing_check(108); + always @(dq_in[109]) dq_timing_check(109); + always @(dq_in[110]) dq_timing_check(110); + always @(dq_in[111]) dq_timing_check(111); + always @(dq_in[112]) dq_timing_check(112); + always @(dq_in[113]) dq_timing_check(113); + always @(dq_in[114]) dq_timing_check(114); + always @(dq_in[115]) dq_timing_check(115); + always @(dq_in[116]) dq_timing_check(116); + always @(dq_in[117]) dq_timing_check(117); + always @(dq_in[118]) dq_timing_check(118); + always @(dq_in[119]) dq_timing_check(119); + always @(dq_in[120]) dq_timing_check(120); + always @(dq_in[121]) dq_timing_check(121); + always @(dq_in[122]) dq_timing_check(122); + always @(dq_in[123]) dq_timing_check(123); + always @(dq_in[124]) dq_timing_check(124); + always @(dq_in[125]) dq_timing_check(125); + always @(dq_in[126]) dq_timing_check(126); + always @(dq_in[127]) dq_timing_check(127); + + task dqs_pos_timing_check; + input i; + reg [5:0] i; + reg [4:0] j; + begin + if (write_levelization && i<32) begin + if (ck_cntr - ck_load_mode < TWLMRD) + $display ("%m: at time %t ERROR: tWLMRD violation on DQS bit %d positive edge.", $time, i); + if (($time - tm_ck_pos < TWLS) || ($time - tm_ck_neg < TWLS)) + $display ("%m: at time %t WARNING: tWLS violation on DQS bit %d positive edge. Indeterminate CK capture is possible.", $time, i); + if (DEBUG) + $display ("%m: at time %t Write Leveling @ DQS ck = %b", $time, diff_ck); + dq_out_en_dly[i*`DQ_PER_DQS] <= #(TWLO) 1'b1; + dq_out_dly[i*`DQ_PER_DQS] <= #(TWLO) diff_ck; +`ifdef WL_ALLDQ + for (j=1; j<`DQ_PER_DQS; j=j+1) begin + dq_out_en_dly[i*`DQ_PER_DQS+j] <= #(TWLO) 1'b1; + dq_out_dly[i*`DQ_PER_DQS+j] <= #(TWLO) diff_ck; + end +`else + for (j=1; j<`DQ_PER_DQS; j=j+1) begin + dq_out_en_dly[i*`DQ_PER_DQS+j] <= #(TWLO + TWLOE) 1'b1; + dq_out_dly[i*`DQ_PER_DQS+j] <= #(TWLO + TWLOE) 1'b0; + end +`endif + end + if (dqs_in_valid && ((wdqs_pos_cntr[i] < wr_burst_length/2) || b2b_write)) begin + if (dqs_in[i] ^ prev_dqs_in[i]) begin + if (dll_locked) begin + if (check_write_preamble[i]) begin + if ($time - tm_dqs_pos[i] < $rtoi(TWPRE*tck_avg)) + $display ("%m: at time %t ERROR: tWPRE violation on %s bit %d", $time, dqs_string[i/32], i%32); + end else if (check_write_postamble[i]) begin + if ($time - tm_dqs_neg[i] < $rtoi(TWPST*tck_avg)) + $display ("%m: at time %t ERROR: tWPST violation on %s bit %d", $time, dqs_string[i/32], i%32); + end else begin + if ($time - tm_dqs_neg[i] < $rtoi(TDQSL*tck_avg)) + $display ("%m: at time %t ERROR: tDQSL violation on %s bit %d", $time, dqs_string[i/32], i%32); + end + end + if ($time - tm_dm[i%32] < TDS) + $display ("%m: at time %t ERROR: tDS violation on DM bit %d by %t", $time, i, tm_dm[i%32] + TDS - $time); + if (!dq_out_en) begin + for (j=0; j<`DQ_PER_DQS; j=j+1) begin + if ($time - tm_dq[(i%32)*`DQ_PER_DQS+j] < TDS) + $display ("%m: at time %t ERROR: tDS violation on DQ bit %d by %t", $time, i*`DQ_PER_DQS+j, tm_dq[(i%32)*`DQ_PER_DQS+j] + TDS - $time); + check_dq_tdipw[(i%32)*`DQ_PER_DQS+j] <= 1'b1; + end + end + if ((wdqs_pos_cntr[i] < wr_burst_length/2) && !b2b_write) begin + wdqs_pos_cntr[i] <= wdqs_pos_cntr[i] + 1; + end else begin + wdqs_pos_cntr[i] <= 1; + end + check_dm_tdipw[i%32] <= 1'b1; + check_write_preamble[i] <= 1'b0; + check_write_postamble[i] <= 1'b0; + check_write_dqs_low[i] <= 1'b0; + tm_dqs[i%32] <= $time; + end else begin + $display ("%m: at time %t ERROR: Invalid latching edge on %s bit %d", $time, dqs_string[i/32], i%32); + end + end + tm_dqss_pos[i] <= $time; + tm_dqs_pos[i] = $time; + prev_dqs_in[i] <= dqs_in[i]; + end + endtask + + always @(posedge dqs_in[ 0]) if ( dqs_in[ 0]) dqs_pos_timing_check( 0); + always @(posedge dqs_in[ 1]) if ( dqs_in[ 1]) dqs_pos_timing_check( 1); + always @(posedge dqs_in[ 2]) if ( dqs_in[ 2]) dqs_pos_timing_check( 2); + always @(posedge dqs_in[ 3]) if ( dqs_in[ 3]) dqs_pos_timing_check( 3); + always @(posedge dqs_in[ 4]) if ( dqs_in[ 4]) dqs_pos_timing_check( 4); + always @(posedge dqs_in[ 5]) if ( dqs_in[ 5]) dqs_pos_timing_check( 5); + always @(posedge dqs_in[ 6]) if ( dqs_in[ 6]) dqs_pos_timing_check( 6); + always @(posedge dqs_in[ 7]) if ( dqs_in[ 7]) dqs_pos_timing_check( 7); + always @(posedge dqs_in[ 8]) if ( dqs_in[ 8]) dqs_pos_timing_check( 8); + always @(posedge dqs_in[ 9]) if ( dqs_in[ 9]) dqs_pos_timing_check( 9); + always @(posedge dqs_in[10]) if ( dqs_in[10]) dqs_pos_timing_check(10); + always @(posedge dqs_in[11]) if ( dqs_in[11]) dqs_pos_timing_check(11); + always @(posedge dqs_in[12]) if ( dqs_in[12]) dqs_pos_timing_check(12); + always @(posedge dqs_in[13]) if ( dqs_in[13]) dqs_pos_timing_check(13); + always @(posedge dqs_in[14]) if ( dqs_in[14]) dqs_pos_timing_check(14); + always @(posedge dqs_in[15]) if ( dqs_in[15]) dqs_pos_timing_check(15); + always @(posedge dqs_in[16]) if ( dqs_in[16]) dqs_pos_timing_check(16); + always @(posedge dqs_in[17]) if ( dqs_in[17]) dqs_pos_timing_check(17); + always @(posedge dqs_in[18]) if ( dqs_in[18]) dqs_pos_timing_check(18); + always @(posedge dqs_in[19]) if ( dqs_in[19]) dqs_pos_timing_check(19); + always @(posedge dqs_in[20]) if ( dqs_in[20]) dqs_pos_timing_check(20); + always @(posedge dqs_in[21]) if ( dqs_in[21]) dqs_pos_timing_check(21); + always @(posedge dqs_in[22]) if ( dqs_in[22]) dqs_pos_timing_check(22); + always @(posedge dqs_in[23]) if ( dqs_in[23]) dqs_pos_timing_check(23); + always @(posedge dqs_in[24]) if ( dqs_in[24]) dqs_pos_timing_check(24); + always @(posedge dqs_in[25]) if ( dqs_in[25]) dqs_pos_timing_check(25); + always @(posedge dqs_in[26]) if ( dqs_in[26]) dqs_pos_timing_check(26); + always @(posedge dqs_in[27]) if ( dqs_in[27]) dqs_pos_timing_check(27); + always @(posedge dqs_in[28]) if ( dqs_in[28]) dqs_pos_timing_check(28); + always @(posedge dqs_in[29]) if ( dqs_in[29]) dqs_pos_timing_check(29); + always @(posedge dqs_in[30]) if ( dqs_in[30]) dqs_pos_timing_check(30); + always @(posedge dqs_in[31]) if ( dqs_in[31]) dqs_pos_timing_check(31); + + always @(negedge dqs_in[32]) if (!dqs_in[32]) dqs_pos_timing_check(32); + always @(negedge dqs_in[33]) if (!dqs_in[33]) dqs_pos_timing_check(33); + always @(negedge dqs_in[34]) if (!dqs_in[34]) dqs_pos_timing_check(34); + always @(negedge dqs_in[35]) if (!dqs_in[35]) dqs_pos_timing_check(35); + always @(negedge dqs_in[36]) if (!dqs_in[36]) dqs_pos_timing_check(36); + always @(negedge dqs_in[37]) if (!dqs_in[37]) dqs_pos_timing_check(37); + always @(negedge dqs_in[38]) if (!dqs_in[38]) dqs_pos_timing_check(38); + always @(negedge dqs_in[39]) if (!dqs_in[39]) dqs_pos_timing_check(39); + always @(negedge dqs_in[40]) if (!dqs_in[40]) dqs_pos_timing_check(40); + always @(negedge dqs_in[41]) if (!dqs_in[41]) dqs_pos_timing_check(41); + always @(negedge dqs_in[42]) if (!dqs_in[42]) dqs_pos_timing_check(42); + always @(negedge dqs_in[43]) if (!dqs_in[43]) dqs_pos_timing_check(43); + always @(negedge dqs_in[44]) if (!dqs_in[44]) dqs_pos_timing_check(44); + always @(negedge dqs_in[45]) if (!dqs_in[45]) dqs_pos_timing_check(45); + always @(negedge dqs_in[46]) if (!dqs_in[46]) dqs_pos_timing_check(46); + always @(negedge dqs_in[47]) if (!dqs_in[47]) dqs_pos_timing_check(47); + always @(negedge dqs_in[48]) if (!dqs_in[48]) dqs_pos_timing_check(48); + always @(negedge dqs_in[49]) if (!dqs_in[49]) dqs_pos_timing_check(49); + always @(negedge dqs_in[50]) if (!dqs_in[50]) dqs_pos_timing_check(50); + always @(negedge dqs_in[51]) if (!dqs_in[51]) dqs_pos_timing_check(51); + always @(negedge dqs_in[52]) if (!dqs_in[52]) dqs_pos_timing_check(52); + always @(negedge dqs_in[53]) if (!dqs_in[53]) dqs_pos_timing_check(53); + always @(negedge dqs_in[54]) if (!dqs_in[54]) dqs_pos_timing_check(54); + always @(negedge dqs_in[55]) if (!dqs_in[55]) dqs_pos_timing_check(55); + always @(negedge dqs_in[56]) if (!dqs_in[56]) dqs_pos_timing_check(56); + always @(negedge dqs_in[57]) if (!dqs_in[57]) dqs_pos_timing_check(57); + always @(negedge dqs_in[58]) if (!dqs_in[58]) dqs_pos_timing_check(58); + always @(negedge dqs_in[59]) if (!dqs_in[59]) dqs_pos_timing_check(59); + always @(negedge dqs_in[60]) if (!dqs_in[60]) dqs_pos_timing_check(60); + always @(negedge dqs_in[61]) if (!dqs_in[61]) dqs_pos_timing_check(61); + always @(negedge dqs_in[62]) if (!dqs_in[62]) dqs_pos_timing_check(62); + always @(negedge dqs_in[63]) if (!dqs_in[63]) dqs_pos_timing_check(63); + + task dqs_neg_timing_check; + input i; + reg [5:0] i; + reg [4:0] j; + begin + if (write_levelization && i<32) begin + if (ck_cntr - ck_load_mode < TWLDQSEN) + $display ("%m: at time %t ERROR: tWLDQSEN violation on DQS bit %d.", $time, i); + if ($time - tm_dqs_pos[i] < $rtoi(TDQSH*tck_avg)) + $display ("%m: at time %t ERROR: tDQSH violation on DQS bit %d by %t", $time, i, tm_dqs_pos[i] + TDQSH*tck_avg - $time); + end + if (dqs_in_valid && (wdqs_pos_cntr[i] > 0) && check_write_dqs_high[i]) begin + if (dqs_in[i] ^ prev_dqs_in[i]) begin + if (dll_locked) begin + if ($time - tm_dqs_pos[i] < $rtoi(TDQSH*tck_avg)) + $display ("%m: at time %t ERROR: tDQSH violation on %s bit %d", $time, dqs_string[i/32], i%32); + if ($time - tm_ck_pos < $rtoi(TDSH*tck_avg)) + $display ("%m: at time %t ERROR: tDSH violation on %s bit %d", $time, dqs_string[i/32], i%32); + end + if ($time - tm_dm[i%32] < TDS) + $display ("%m: at time %t ERROR: tDS violation on DM bit %d by %t", $time, i, tm_dm[i%32] + TDS - $time); + if (!dq_out_en) begin + for (j=0; j<`DQ_PER_DQS; j=j+1) begin + if ($time - tm_dq[(i%32)*`DQ_PER_DQS+j] < TDS) + $display ("%m: at time %t ERROR: tDS violation on DQ bit %d by %t", $time, i*`DQ_PER_DQS+j, tm_dq[(i%32)*`DQ_PER_DQS+j] + TDS - $time); + check_dq_tdipw[(i%32)*`DQ_PER_DQS+j] <= 1'b1; + end + end + check_dm_tdipw[i%32] <= 1'b1; + tm_dqs[i%32] <= $time; + end else begin + $display ("%m: at time %t ERROR: Invalid latching edge on %s bit %d", $time, dqs_string[i/32], i%32); + end + end + check_write_dqs_high[i] <= 1'b0; + tm_dqs_neg[i] = $time; + prev_dqs_in[i] <= dqs_in[i]; + end + endtask + + always @(negedge dqs_in[ 0]) if (!dqs_in[ 0]) dqs_neg_timing_check( 0); + always @(negedge dqs_in[ 1]) if (!dqs_in[ 1]) dqs_neg_timing_check( 1); + always @(negedge dqs_in[ 2]) if (!dqs_in[ 2]) dqs_neg_timing_check( 2); + always @(negedge dqs_in[ 3]) if (!dqs_in[ 3]) dqs_neg_timing_check( 3); + always @(negedge dqs_in[ 4]) if (!dqs_in[ 4]) dqs_neg_timing_check( 4); + always @(negedge dqs_in[ 5]) if (!dqs_in[ 5]) dqs_neg_timing_check( 5); + always @(negedge dqs_in[ 6]) if (!dqs_in[ 6]) dqs_neg_timing_check( 6); + always @(negedge dqs_in[ 7]) if (!dqs_in[ 7]) dqs_neg_timing_check( 7); + always @(negedge dqs_in[ 8]) if (!dqs_in[ 8]) dqs_neg_timing_check( 8); + always @(negedge dqs_in[ 9]) if (!dqs_in[ 9]) dqs_neg_timing_check( 9); + always @(negedge dqs_in[10]) if (!dqs_in[10]) dqs_neg_timing_check(10); + always @(negedge dqs_in[11]) if (!dqs_in[11]) dqs_neg_timing_check(11); + always @(negedge dqs_in[12]) if (!dqs_in[12]) dqs_neg_timing_check(12); + always @(negedge dqs_in[13]) if (!dqs_in[13]) dqs_neg_timing_check(13); + always @(negedge dqs_in[14]) if (!dqs_in[14]) dqs_neg_timing_check(14); + always @(negedge dqs_in[15]) if (!dqs_in[15]) dqs_neg_timing_check(15); + always @(negedge dqs_in[16]) if (!dqs_in[16]) dqs_neg_timing_check(16); + always @(negedge dqs_in[17]) if (!dqs_in[17]) dqs_neg_timing_check(17); + always @(negedge dqs_in[18]) if (!dqs_in[18]) dqs_neg_timing_check(18); + always @(negedge dqs_in[19]) if (!dqs_in[19]) dqs_neg_timing_check(19); + always @(negedge dqs_in[20]) if (!dqs_in[20]) dqs_neg_timing_check(20); + always @(negedge dqs_in[21]) if (!dqs_in[21]) dqs_neg_timing_check(21); + always @(negedge dqs_in[22]) if (!dqs_in[22]) dqs_neg_timing_check(22); + always @(negedge dqs_in[23]) if (!dqs_in[23]) dqs_neg_timing_check(23); + always @(negedge dqs_in[24]) if (!dqs_in[24]) dqs_neg_timing_check(24); + always @(negedge dqs_in[25]) if (!dqs_in[25]) dqs_neg_timing_check(25); + always @(negedge dqs_in[26]) if (!dqs_in[26]) dqs_neg_timing_check(26); + always @(negedge dqs_in[27]) if (!dqs_in[27]) dqs_neg_timing_check(27); + always @(negedge dqs_in[28]) if (!dqs_in[28]) dqs_neg_timing_check(28); + always @(negedge dqs_in[29]) if (!dqs_in[29]) dqs_neg_timing_check(29); + always @(negedge dqs_in[30]) if (!dqs_in[30]) dqs_neg_timing_check(30); + always @(negedge dqs_in[31]) if (!dqs_in[31]) dqs_neg_timing_check(31); + + always @(posedge dqs_in[32]) if ( dqs_in[32]) dqs_neg_timing_check(32); + always @(posedge dqs_in[33]) if ( dqs_in[33]) dqs_neg_timing_check(33); + always @(posedge dqs_in[34]) if ( dqs_in[34]) dqs_neg_timing_check(34); + always @(posedge dqs_in[35]) if ( dqs_in[35]) dqs_neg_timing_check(35); + always @(posedge dqs_in[36]) if ( dqs_in[36]) dqs_neg_timing_check(36); + always @(posedge dqs_in[37]) if ( dqs_in[37]) dqs_neg_timing_check(37); + always @(posedge dqs_in[38]) if ( dqs_in[38]) dqs_neg_timing_check(38); + always @(posedge dqs_in[39]) if ( dqs_in[39]) dqs_neg_timing_check(39); + always @(posedge dqs_in[40]) if ( dqs_in[40]) dqs_neg_timing_check(40); + always @(posedge dqs_in[41]) if ( dqs_in[41]) dqs_neg_timing_check(41); + always @(posedge dqs_in[42]) if ( dqs_in[42]) dqs_neg_timing_check(42); + always @(posedge dqs_in[43]) if ( dqs_in[43]) dqs_neg_timing_check(43); + always @(posedge dqs_in[44]) if ( dqs_in[44]) dqs_neg_timing_check(44); + always @(posedge dqs_in[45]) if ( dqs_in[45]) dqs_neg_timing_check(45); + always @(posedge dqs_in[46]) if ( dqs_in[46]) dqs_neg_timing_check(46); + always @(posedge dqs_in[47]) if ( dqs_in[47]) dqs_neg_timing_check(47); + always @(posedge dqs_in[48]) if ( dqs_in[48]) dqs_neg_timing_check(48); + always @(posedge dqs_in[49]) if ( dqs_in[49]) dqs_neg_timing_check(49); + always @(posedge dqs_in[50]) if ( dqs_in[50]) dqs_neg_timing_check(50); + always @(posedge dqs_in[51]) if ( dqs_in[51]) dqs_neg_timing_check(51); + always @(posedge dqs_in[52]) if ( dqs_in[52]) dqs_neg_timing_check(52); + always @(posedge dqs_in[53]) if ( dqs_in[53]) dqs_neg_timing_check(53); + always @(posedge dqs_in[54]) if ( dqs_in[54]) dqs_neg_timing_check(54); + always @(posedge dqs_in[55]) if ( dqs_in[55]) dqs_neg_timing_check(55); + always @(posedge dqs_in[56]) if ( dqs_in[56]) dqs_neg_timing_check(56); + always @(posedge dqs_in[57]) if ( dqs_in[57]) dqs_neg_timing_check(57); + always @(posedge dqs_in[58]) if ( dqs_in[58]) dqs_neg_timing_check(58); + always @(posedge dqs_in[59]) if ( dqs_in[59]) dqs_neg_timing_check(59); + always @(posedge dqs_in[60]) if ( dqs_in[60]) dqs_neg_timing_check(60); + always @(posedge dqs_in[61]) if ( dqs_in[61]) dqs_neg_timing_check(61); + always @(posedge dqs_in[62]) if ( dqs_in[62]) dqs_neg_timing_check(62); + always @(posedge dqs_in[63]) if ( dqs_in[63]) dqs_neg_timing_check(63); + +endmodule diff --git a/runsimsoc2.sh b/runsimsoc2.sh new file mode 100755 index 0000000..0fa295b --- /dev/null +++ b/runsimsoc2.sh @@ -0,0 +1,22 @@ +#!/bin/bash +set -e + +LIB_DIR=./src/ecp5u + +#python3 simsoc.py +yosys simsoc.ys +cp ${LIB_DIR}/DDRDLLA.v DDRDLLA.v +patch DDRDLLA.v < DDRDLLA.patch +iverilog -Wall -g2012 -s simsoctb -o simsoc \ + src/simsoctb.v ./top.v dram_model/ddr3.v \ + ${LIB_DIR}/ECLKSYNCB.v ${LIB_DIR}/EHXPLLL.v \ + ${LIB_DIR}/PUR.v ${LIB_DIR}/GSR.v \ + ${LIB_DIR}/FD1S3AX.v ${LIB_DIR}/SGSR.v ${LIB_DIR}/ODDRX2F.v \ + ${LIB_DIR}/ODDRX2DQA.v ${LIB_DIR}/DELAYF.v ${LIB_DIR}/BB.v \ + ${LIB_DIR}/OB.v ${LIB_DIR}/IB.v \ + ${LIB_DIR}/DQSBUFM.v ${LIB_DIR}/UDFDL5_UDP_X.v \ + ${LIB_DIR}/TSHX2DQSA.v ${LIB_DIR}/TSHX2DQA.v \ + ${LIB_DIR}/ODDRX2DQSB.v ${LIB_DIR}/IDDRX2DQA.v \ + DDRDLLA.v \ + ${LIB_DIR}/CLKDIVF.v +vvp -n simsoc -fst-speed diff --git a/simsoc.ys b/simsoc.ys new file mode 100644 index 0000000..3bd115f --- /dev/null +++ b/simsoc.ys @@ -0,0 +1,34 @@ +read_ilang build/top.il +read_verilog ../uart16550/rtl/verilog/raminfr.v +read_verilog ../uart16550/rtl/verilog/uart_defines.v +read_verilog ../uart16550/rtl/verilog/uart_rfifo.v +read_verilog ../uart16550/rtl/verilog/uart_top.v +read_verilog ../uart16550/rtl/verilog/timescale.v +read_verilog ../uart16550/rtl/verilog/uart_receiver.v +read_verilog ../uart16550/rtl/verilog/uart_sync_flops.v +read_verilog ../uart16550/rtl/verilog/uart_transmitter.v +read_verilog ../uart16550/rtl/verilog/uart_debug_if.v +read_verilog ../uart16550/rtl/verilog/uart_regs.v +read_verilog ../uart16550/rtl/verilog/uart_tfifo.v +read_verilog ../uart16550/rtl/verilog/uart_wb.v +read_verilog ./external_core_top.v + +delete w:$verilog_initial_trigger +proc_prune +proc_clean +proc_rmdead +proc_init +proc_arst +proc_dlatch +proc_dff +proc_mux +proc_rmdead +proc_clean +pmuxtree +memory_collect +extract_fa +clean +opt +clean +write_verilog -norename top.v +stat diff --git a/src/simsoctb.v b/src/simsoctb.v new file mode 100644 index 0000000..ea0bf15 --- /dev/null +++ b/src/simsoctb.v @@ -0,0 +1,162 @@ +// Copyright (c) 2020 LambdaConcept +// Copyright (c) 2021 Luke Kenneth Casson Leighton + +`timescale 1 ns / 1 ns + +module simsoctb; + // GSR & PUR init requires for Lattice models + GSR GSR_INST ( + .GSR(1'b1) + ); + PUR PUR_INST ( + .PUR (1'b1) + ); + + reg clkin; + wire sync; + wire sync2x; + wire dramsync; + wire init; + + // Generate 100 Mhz clock + always + begin + clkin = 1; + #5; + clkin = 0; + #5; + end + + // DDR3 init + wire dram_ck; + wire dram_cke; + wire dram_we_n; + wire dram_cs_n; + wire dram_ras_n; + wire dram_cas_n; + wire [15:0] dram_dq; + inout wire [1:0] dram_dqs; + inout wire [1:0] dram_dqs_n; + wire [13:0] dram_a; + wire [2:0] dram_ba; + wire [1:0] dram_dm; + wire dram_odt; + wire [1:0] dram_tdqs_n; + wire dram_rst; + + ddr3 #( + .check_strict_timing(0) + ) ram_chip ( + .rst_n(dram_rst), + .ck(dram_ck), + .ck_n(~dram_ck), + .cke(dram_cke), + .cs_n(dram_cs_n), + .ras_n(dram_ras_n), + .cas_n(dram_cas_n), + .we_n(dram_we_n), + .dm_tdqs(dram_dm), + .ba(dram_ba), + .addr(dram_a), + .dq(dram_dq), + .dqs(dram_dqs), + .dqs_n(dram_dqs_n), + .tdqs_n(dram_tdqs_n), + .odt(dram_odt) + ); + + assign dram_dqs_n = (dram_dqs != 2'hz) ? ~dram_dqs : 2'hz; + + // uart, LEDs, switches + reg uart_tx; + wire uart_rx; + reg [3:0] wishbone_sel = 0; + reg wishbone_cyc = 0; + reg wishbone_stb = 0; + reg wishbone_we = 0; + wire led_0; + wire led_1; + wire led_2; + wire led_3; + wire led_4; + wire led_5; + wire led_6; + wire led_7; + reg switch_0 = 0; + reg switch_1 = 0; + reg switch_2 = 0; + reg switch_3 = 0; + reg switch_4 = 0; + reg switch_5 = 0; + reg switch_6 = 0; + reg switch_7 = 0; + + //defparam ram_chip. + + top simsoctop ( + .ddr3_0__rst__io(dram_rst), + .ddr3_0__dq__io(dram_dq), + .ddr3_0__dqs__p(dram_dqs), + .ddr3_0__clk__p(dram_ck), + .ddr3_0__clk_en__io(dram_cke), + .ddr3_0__cs__io(dram_cs_n), + .ddr3_0__we__io(dram_we_n), + .ddr3_0__ras__io(dram_ras_n), + .ddr3_0__cas__io(dram_cas_n), + .ddr3_0__a__io(dram_a), + .ddr3_0__ba__io(dram_ba), + .ddr3_0__dm__io(dram_dm), + .ddr3_0__odt__io(dram_odt), + .uart_0__rx__io(uart_rx), + .uart_0__tx__io(uart_tx), + .led_0__io(led_0), + .led_1__io(led_1), + .led_2__io(led_2), + .led_3__io(led_3), + .led_4__io(led_4), + .led_5__io(led_5), + .led_6__io(led_6), + .led_7__io(led_7), + .switch_0__io(switch_0), + .switch_1__io(switch_1), + .switch_2__io(switch_2), + .switch_3__io(switch_3), + .switch_4__io(switch_4), + .switch_5__io(switch_5), + .switch_6__io(switch_6), + .switch_7__io(switch_7), + .clk100_0__p(clkin), + .rst_0__io(1'b0) + ); + + initial + begin + $dumpfile("simsoc.fst"); + $dumpvars(0, clkin); + $dumpvars(0, dram_rst); + $dumpvars(0, dram_dq); + $dumpvars(0, dram_dqs); + $dumpvars(0, dram_ck); + $dumpvars(0, dram_cke); + $dumpvars(0, dram_we_n); + $dumpvars(0, dram_ras_n); + $dumpvars(0, dram_cas_n); + $dumpvars(0, dram_a); + $dumpvars(0, dram_ba); + $dumpvars(0, dram_dm); + $dumpvars(0, dram_odt); + $dumpvars(0, uart_tx); + $dumpvars(0, uart_rx); + $dumpvars(0, simsoctop); + $dumpvars(0, ram_chip); + end + + initial + begin + // run for a set time period then exit + #50000; + + $finish; + end + +endmodule -- 2.30.2