From ada70e8c521a5cea7776005af99fec7f2461e079 Mon Sep 17 00:00:00 2001 From: Florent Kermarrec Date: Fri, 5 Jul 2019 14:37:46 +0200 Subject: [PATCH] soc/cores/spi: remove too complicated and does not seem reliable in all cases. --- litex/soc/cores/spi.py | 385 ----------------------------------------- 1 file changed, 385 deletions(-) delete mode 100644 litex/soc/cores/spi.py diff --git a/litex/soc/cores/spi.py b/litex/soc/cores/spi.py deleted file mode 100644 index b1219f99..00000000 --- a/litex/soc/cores/spi.py +++ /dev/null @@ -1,385 +0,0 @@ -# This file is Copyright (c) 2017-2018 Robert Jordens -# This file is Copyright (c) 2015-2017 Florent Kermarrec -# This file is Copyright (c) 2015-2017 Sebastien Bourdeauducq -# This file is Copyright (c) 2016 William D. Jones -# License: BSD - -from itertools import product - -from migen import * - -from litex.soc.interconnect.csr import * - - -class SPIClockGen(Module): - def __init__(self, width): - self.load = Signal(width) - self.bias = Signal() # bias this clock phase to longer times - self.edge = Signal() - self.clk = Signal(reset=1) - - cnt = Signal.like(self.load) - bias = Signal() - zero = Signal() - self.comb += [ - zero.eq(cnt == 0), - self.edge.eq(zero & ~bias), - ] - self.sync += [ - If(zero, - bias.eq(0), - ).Else( - cnt.eq(cnt - 1), - ), - If(self.edge, - cnt.eq(self.load[1:]), - bias.eq(self.load[0] & (self.clk ^ self.bias)), - self.clk.eq(~self.clk), - ) - ] - - -class SPIRegister(Module): - def __init__(self, width): - self.data = Signal(width) - self.o = Signal() - self.i = Signal() - self.lsb = Signal() - self.shift = Signal() - self.sample = Signal() - - self.comb += [ - self.o.eq(Mux(self.lsb, self.data[0], self.data[-1])), - ] - self.sync += [ - If(self.lsb, - If(self.shift, - self.data[:-1].eq(self.data[1:]) - ), - If(self.sample, - self.data[0].eq(self.i) - ) - ).Else( - If(self.shift, - self.data[1:].eq(self.data[:-1]), - ), - If(self.sample, - self.data[0].eq(self.i) - ) - ) - ] - - -class SPIBitCounter(Module): - def __init__(self, width): - self.n_read = Signal(width) - self.n_write = Signal(width) - self.read = Signal() - self.write = Signal() - self.done = Signal() - - self.comb += [ - self.write.eq(self.n_write != 0), - self.read.eq(self.n_read != 0), - self.done.eq(~(self.write | self.read)), - ] - self.sync += [ - If(self.write, - self.n_write.eq(self.n_write - 1), - ).Elif(self.read, - self.n_read.eq(self.n_read - 1), - ) - ] - - -class SPIMachine(Module): - def __init__(self, data_width, clock_width, bits_width): - ce = CEInserter() - self.submodules.cg = ce(SPIClockGen(clock_width)) - self.submodules.reg = ce(SPIRegister(data_width)) - self.submodules.bits = ce(SPIBitCounter(bits_width)) - self.div_write = Signal.like(self.cg.load) - self.div_read = Signal.like(self.cg.load) - self.clk_phase = Signal() - self.start = Signal() - self.cs = Signal() - self.oe = Signal() - self.done = Signal() - - # # # - - fsm = CEInserter()(FSM("IDLE")) - self.submodules += fsm - - fsm.act("IDLE", - If(self.start, - If(self.clk_phase, - NextState("WAIT"), - ).Else( - NextState("SETUP"), - ) - ) - ) - fsm.act("SETUP", - self.reg.sample.eq(1), - NextState("HOLD"), - ) - fsm.act("HOLD", - If(self.bits.done & ~self.start, - If(self.clk_phase, - NextState("IDLE"), - ).Else( - NextState("WAIT"), - ) - ).Else( - self.reg.shift.eq(~self.start), - NextState("SETUP"), - ) - ) - fsm.act("WAIT", - If(self.bits.done, - NextState("IDLE"), - ).Else( - NextState("SETUP"), - ) - ) - - write0 = Signal() - self.sync += [ - If(self.cg.edge & self.reg.shift, - write0.eq(self.bits.write), - ) - ] - self.comb += [ - self.cg.ce.eq(self.start | self.cs | ~self.cg.edge), - If(self.bits.write | ~self.bits.read, - self.cg.load.eq(self.div_write), - ).Else( - self.cg.load.eq(self.div_read), - ), - self.cg.bias.eq(self.clk_phase), - fsm.ce.eq(self.cg.edge), - self.cs.eq(~fsm.ongoing("IDLE")), - self.reg.ce.eq(self.cg.edge), - self.bits.ce.eq(self.cg.edge & self.reg.sample), - self.done.eq(self.cg.edge & self.bits.done & fsm.ongoing("HOLD")), - self.oe.eq(write0 | self.bits.write), - ] - - -class SPIMasterCore(Module): - """SPI Master Core. - - Notes: - * M = 32 is the data width (maximum write bits, maximum read bits) - * Every transfer consists of a write_length 0-M bit write followed - by a read_length 0-M bit read. - * cs_n is asserted at the beginning and deasserted at the end of the - transfer if there is no other transfer pending. - * cs_n handling is agnostic to whether it is one-hot or decoded - somewhere downstream. If it is decoded, "cs_n all deasserted" - should be handled accordingly (no slave selected). - If it is one-hot, asserting multiple slaves should only be attempted - if miso is either not connected between slaves, or open collector, - or correctly multiplexed externally. - * If config.cs_polarity == 0 (cs active low, the default), - "cs_n all deasserted" means "all cs_n bits high". - * cs is not mandatory in pads. Framing and chip selection can also - be handled independently through other means. - * If there is a miso wire in pads, the input and output can be done - with two signals (a.k.a. 4-wire SPI), else mosi must be used for - both output and input (a.k.a. 3-wire SPI) and config.half_duplex - must to be set when reading data is desired. - * For 4-wire SPI only the sum of read_length and write_length matters. - The behavior is the same no matter how the total transfer length is - divided between the two. For 3-wire SPI, the direction of mosi/miso - is switched from output to input after write_len cycles, at the - "shift_out" clk edge corresponding to bit write_length + 1 of the - transfer. - * The first bit output on mosi is always the MSB/LSB (depending on - config.lsb_first) of the miso_data signal, independent of - xfer.write_len. The last bit input from miso always ends up in - the LSB/MSB (respectively) of the misoc_data signal, independent of - read_len. - * Data output on mosi in 4-wire SPI during the read cycles is what - is found in the data register at the time. - Data in the data register outside the least/most (depending - on config.lsb_first) significant read_length bits is what is - seen on miso during the write cycles. - * The SPI data register is double-buffered: Once a transfer has - started, new write data can be written, queuing a new transfer. - Transfers submitted this way are chained and executed without - deasserting cs. Once a transfer completes, the previous transfer's - read data is available in the data register. - * Changes to config signal take effect immediately. Changes - to xfer_* signals are synchronized to the start of a transfer. - - Transaction Sequence: - * If desired, set the config signal to set up the core. - * If designed, set the xfer signal to set up lengths and cs_n. - * Set the miso_data signal (not required for zero-length writes), - * Set start signal to 1 - * Wait for active and pending signals to be 0. - * If desired, use the misoc_data signal corresponding to the last - completed transfer. - - Core IOs: - - config signal: - 1 offline: all pins high-z (reset=1) - 1 active: cs/transfer active (read-only) - 1 pending: transfer pending in intermediate buffer (read-only) - 1 cs_polarity: active level of chip select (reset=0) - 1 clk_polarity: idle level of clk (reset=0) - 1 clk_phase: first edge after cs assertion to sample data on (reset=0) - (clk_polarity, clk_phase) == (CPOL, CPHA) in Freescale language. - (0, 0): idle low, output on falling, input on rising - (0, 1): idle low, output on rising, input on falling - (1, 0): idle high, output on rising, input on falling - (1, 1): idle high, output on falling, input on rising - There is never a clk edge during a cs edge. - 1 lsb_first: LSB is the first bit on the wire (reset=0) - 1 half_duplex: 3-wire SPI, in/out on mosi (reset=0) - 8 undefined - 8 div_write: counter load value to divide this module's clock - to generate the SPI write clk (reset=0) - f_clk/f_spi_write == div_write + 2 - 8 div_read: ditto for the read clock - - xfer_config signal: - 16 cs: active high bit mask of chip selects to assert (reset=0) - 6 write_len: 0-M bits (reset=0) - 2 undefined - 6 read_len: 0-M bits (reset=0) - 2 undefined - - xfer_mosi/miso_data signal: - M write/read data (reset=0) - """ - def __init__(self, pads): - self.config = Record([ - ("offline", 1), - ("padding0", 2), - ("cs_polarity", 1), - ("clk_polarity", 1), - ("clk_phase", 1), - ("lsb_first", 1), - ("half_duplex", 1), - ("padding1", 8), - ("div_write", 8), - ("div_read", 8), - ]) - self.config.offline.reset = 1 - - self.xfer = Record([ - ("cs", 16), - ("write_length", 6), - ("padding0", 2), - ("read_length", 6), - ("padding1", 2), - ]) - - self.start = Signal() - self.active = Signal() - self.pending = Signal() - self.mosi_data = Signal(32) - self.miso_data = Signal(32) - - # # # - - self.submodules.machine = machine = SPIMachine( - data_width=32, - clock_width=len(self.config.div_read), - bits_width=len(self.xfer.read_length)) - - pending = Signal() - cs = Signal.like(self.xfer.cs) - data_read = Signal.like(machine.reg.data) - data_write = Signal.like(machine.reg.data) - - self.comb += [ - self.miso_data.eq(data_read), - machine.start.eq(pending & (~machine.cs | machine.done)), - machine.clk_phase.eq(self.config.clk_phase), - machine.reg.lsb.eq(self.config.lsb_first), - machine.div_write.eq(self.config.div_write), - machine.div_read.eq(self.config.div_read), - ] - self.sync += [ - If(machine.done, - data_read.eq(machine.reg.data), - ), - If(machine.start, - cs.eq(self.xfer.cs), - machine.bits.n_write.eq(self.xfer.write_length), - machine.bits.n_read.eq(self.xfer.read_length), - machine.reg.data.eq(data_write), - pending.eq(0), - ), - If(self.start, - data_write.eq(self.mosi_data), - pending.eq(1) - ), - self.active.eq(machine.cs), - self.pending.eq(pending), - ] - - # I/O - if not hasattr(pads, "cs_n"): - self.cs_n = Signal() - else: - self.cs_n = pads.cs_n - cs_n_t = TSTriple(len(self.cs_n)) - self.specials += cs_n_t.get_tristate(self.cs_n) - self.comb += [ - cs_n_t.oe.eq(~self.config.offline), - cs_n_t.o.eq((cs & Replicate(machine.cs, len(cs))) ^ - Replicate(~self.config.cs_polarity, len(cs))), - ] - - clk_t = TSTriple() - self.specials += clk_t.get_tristate(pads.clk) - self.comb += [ - clk_t.oe.eq(~self.config.offline), - clk_t.o.eq((machine.cg.clk & machine.cs) ^ self.config.clk_polarity), - ] - - mosi_t = TSTriple() - self.specials += mosi_t.get_tristate(pads.mosi) - self.comb += [ - mosi_t.oe.eq(~self.config.offline & machine.cs & - (machine.oe | ~self.config.half_duplex)), - mosi_t.o.eq(machine.reg.o), - machine.reg.i.eq(Mux(self.config.half_duplex, mosi_t.i, - getattr(pads, "miso", mosi_t.i))), - ] - self.mosi_t = mosi_t - - -class SPIMaster(Module, AutoCSR): - """SPI Master.""" - def __init__(self, pads, interface="csr"): - self.submodules.core = core = SPIMasterCore(pads) - - # # # - - if interface == "csr": - self.config = CSRStorage(32) - self.xfer = CSRStorage(32) - self.start = CSR() - self.active = CSRStatus() - self.pending = CSRStatus() - self.mosi_data = CSRStorage(32) - self.miso_data = CSRStatus(32) - - self.comb += [ - core.config.raw_bits().eq(self.config.storage), - core.xfer.raw_bits().eq(self.xfer.storage), - core.start.eq(self.start.re & self.start.r), - self.active.status.eq(core.active), - self.pending.status.eq(core.pending), - core.mosi_data.eq(self.mosi_data.storage), - self.miso_data.status.eq(core.miso_data) - ] - else: - raise NotImplementedError -- 2.30.2