From adbfde6dff6094f25ec838a8e036dd4494678db3 Mon Sep 17 00:00:00 2001 From: Jason Lowe-Power Date: Fri, 9 Mar 2018 12:06:06 -0800 Subject: [PATCH] learning_gem5: Add config files for MSI protocol Adds the required configuration files to run the MSI protocol. These config files are much simpler than the current Ruby examples and follow the pattern in the other Learning gem5 run scripts. By default, this script runs with two CPUs and runs the recently added thread test binary. Currently, only SE mode is supported. This code follows Learning gem5 Part 3. http://learning.gem5.org/book/part3/index.html Change-Id: I813a3153d49e47198444c38a6af30269bd1310cd Signed-off-by: Jason Lowe-Power Reviewed-on: https://gem5-review.googlesource.com/8943 Reviewed-by: Nikos Nikoleris --- configs/learning_gem5/part3/msi_caches.py | 253 +++++++++++++++++++++ configs/learning_gem5/part3/simple_ruby.py | 101 ++++++++ 2 files changed, 354 insertions(+) create mode 100644 configs/learning_gem5/part3/msi_caches.py create mode 100644 configs/learning_gem5/part3/simple_ruby.py diff --git a/configs/learning_gem5/part3/msi_caches.py b/configs/learning_gem5/part3/msi_caches.py new file mode 100644 index 000000000..7bd24efe1 --- /dev/null +++ b/configs/learning_gem5/part3/msi_caches.py @@ -0,0 +1,253 @@ +# -*- coding: utf-8 -*- +# Copyright (c) 2017 Jason Power +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer; +# redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution; +# neither the name of the copyright holders nor the names of its +# contributors may be used to endorse or promote products derived from +# this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# Authors: Jason Power + +""" This file creates a set of Ruby caches, the Ruby network, and a simple +point-to-point topology. +See Part 3 in the Learning gem5 book: learning.gem5.org/book/part3 + +IMPORTANT: If you modify this file, it's likely that the Learning gem5 book + also needs to be updated. For now, email Jason + +""" + +import math + +from m5.defines import buildEnv +from m5.util import fatal, panic + +from m5.objects import * + +class MyCacheSystem(RubySystem): + + def __init__(self): + if buildEnv['PROTOCOL'] != 'MSI': + fatal("This system assumes MSI from learning gem5!") + + super(MyCacheSystem, self).__init__() + + def setup(self, system, cpus, mem_ctrls): + """Set up the Ruby cache subsystem. Note: This can't be done in the + constructor because many of these items require a pointer to the + ruby system (self). This causes infinite recursion in initialize() + if we do this in the __init__. + """ + # Ruby's global network. + self.network = MyNetwork(self) + + # MSI uses 3 virtual networks. One for requests (lowest priority), one + # for responses (highest priority), and one for "forwards" or + # cache-to-cache requests. See *.sm files for details. + self.number_of_virtual_networks = 3 + self.network.number_of_virtual_networks = 3 + + # There is a single global list of all of the controllers to make it + # easier to connect everything to the global network. This can be + # customized depending on the topology/network requirements. + # Create one controller for each L1 cache (and the cache mem obj.) + # Create a single directory controller (Really the memory cntrl) + self.controllers = \ + [L1Cache(system, self, cpu) for cpu in cpus] + \ + [DirController(self, system.mem_ranges, mem_ctrls)] + + # Create one sequencer per CPU. In many systems this is more + # complicated since you have to create sequencers for DMA controllers + # and other controllers, too. + self.sequencers = [RubySequencer(version = i, + # I/D cache is combined and grab from ctrl + icache = self.controllers[i].cacheMemory, + dcache = self.controllers[i].cacheMemory, + clk_domain = self.controllers[i].clk_domain, + ) for i in range(len(cpus))] + + # We know that we put the controllers in an order such that the first + # N of them are the L1 caches which need a sequencer pointer + for i,c in enumerate(self.controllers[0:len(self.sequencers)]): + c.sequencer = self.sequencers[i] + + self.num_of_sequencers = len(self.sequencers) + + # Create the network and connect the controllers. + # NOTE: This is quite different if using Garnet! + self.network.connectControllers(self.controllers) + self.network.setup_buffers() + + # Set up a proxy port for the system_port. Used for load binaries and + # other functional-only things. + self.sys_port_proxy = RubyPortProxy() + system.system_port = self.sys_port_proxy.slave + + # Connect the cpu's cache, interrupt, and TLB ports to Ruby + for i,cpu in enumerate(cpus): + cpu.icache_port = self.sequencers[i].slave + cpu.dcache_port = self.sequencers[i].slave + isa = buildEnv['TARGET_ISA'] + if isa == 'x86': + cpu.interrupts[0].pio = self.sequencers[i].master + cpu.interrupts[0].int_master = self.sequencers[i].slave + cpu.interrupts[0].int_slave = self.sequencers[i].master + if isa == 'x86' or isa == 'arm': + cpu.itb.walker.port = self.sequencers[i].slave + cpu.dtb.walker.port = self.sequencers[i].slave + + +class L1Cache(L1Cache_Controller): + + _version = 0 + @classmethod + def versionCount(cls): + cls._version += 1 # Use count for this particular type + return cls._version - 1 + + def __init__(self, system, ruby_system, cpu): + """CPUs are needed to grab the clock domain and system is needed for + the cache block size. + """ + super(L1Cache, self).__init__() + + self.version = self.versionCount() + # This is the cache memory object that stores the cache data and tags + self.cacheMemory = RubyCache(size = '16kB', + assoc = 8, + start_index_bit = self.getBlockSizeBits(system)) + self.clk_domain = cpu.clk_domain + self.send_evictions = self.sendEvicts(cpu) + self.ruby_system = ruby_system + self.connectQueues(ruby_system) + + def getBlockSizeBits(self, system): + bits = int(math.log(system.cache_line_size, 2)) + if 2**bits != system.cache_line_size.value: + panic("Cache line size not a power of 2!") + return bits + + def sendEvicts(self, cpu): + """True if the CPU model or ISA requires sending evictions from caches + to the CPU. Two scenarios warrant forwarding evictions to the CPU: + 1. The O3 model must keep the LSQ coherent with the caches + 2. The x86 mwait instruction is built on top of coherence + 3. The local exclusive monitor in ARM systems + """ + if type(cpu) is DerivO3CPU or \ + buildEnv['TARGET_ISA'] in ('x86', 'arm'): + return True + return False + + def connectQueues(self, ruby_system): + """Connect all of the queues for this controller. + """ + # mandatoryQueue is a special variable. It is used by the sequencer to + # send RubyRequests from the CPU (or other processor). It isn't + # explicitly connected to anything. + self.mandatoryQueue = MessageBuffer() + + # All message buffers must be created and connected to the general + # Ruby network. In this case, "slave/master" don't mean the same thing + # as normal gem5 ports. If a MessageBuffer is a "to" buffer (i.e., out) + # then you use the "master", otherwise, the slave. + self.requestToDir = MessageBuffer(ordered = True) + self.requestToDir.master = ruby_system.network.slave + self.responseToDirOrSibling = MessageBuffer(ordered = True) + self.responseToDirOrSibling.master = ruby_system.network.slave + self.forwardFromDir = MessageBuffer(ordered = True) + self.forwardFromDir.slave = ruby_system.network.master + self.responseFromDirOrSibling = MessageBuffer(ordered = True) + self.responseFromDirOrSibling.slave = ruby_system.network.master + +class DirController(Directory_Controller): + + _version = 0 + @classmethod + def versionCount(cls): + cls._version += 1 # Use count for this particular type + return cls._version - 1 + + def __init__(self, ruby_system, ranges, mem_ctrls): + """ranges are the memory ranges assigned to this controller. + """ + if len(mem_ctrls) > 1: + panic("This cache system can only be connected to one mem ctrl") + super(DirController, self).__init__() + self.version = self.versionCount() + self.addr_ranges = ranges + self.ruby_system = ruby_system + self.directory = RubyDirectoryMemory() + # Connect this directory to the memory side. + self.memory = mem_ctrls[0].port + self.connectQueues(ruby_system) + + def connectQueues(self, ruby_system): + self.requestFromCache = MessageBuffer(ordered = True) + self.requestFromCache.slave = ruby_system.network.master + self.responseFromCache = MessageBuffer(ordered = True) + self.responseFromCache.slave = ruby_system.network.master + + self.responseToCache = MessageBuffer(ordered = True) + self.responseToCache.master = ruby_system.network.slave + self.forwardToCache = MessageBuffer(ordered = True) + self.forwardToCache.master = ruby_system.network.slave + + # This is another special message buffer. It is used to send replies + # from memory back to the controller. Any messages received on the + # memory port (see self.memory above) will be directed to this + # message buffer. + self.responseFromMemory = MessageBuffer() + +class MyNetwork(SimpleNetwork): + """A simple point-to-point network. This doesn't not use garnet. + """ + + def __init__(self, ruby_system): + super(MyNetwork, self).__init__() + self.netifs = [] + self.ruby_system = ruby_system + + def connectControllers(self, controllers): + """Connect all of the controllers to routers and connec the routers + together in a point-to-point network. + """ + # Create one router/switch per controller in the system + self.routers = [Switch(router_id = i) for i in range(len(controllers))] + + # Make a link from each controller to the router. The link goes + # externally to the network. + self.ext_links = [SimpleExtLink(link_id=i, ext_node=c, + int_node=self.routers[i]) + for i, c in enumerate(controllers)] + + # Make an "internal" link (internal to the network) between every pair + # of routers. + link_count = 0 + self.int_links = [] + for ri in self.routers: + for rj in self.routers: + if ri == rj: continue # Don't connect a router to itself! + link_count += 1 + self.int_links.append(SimpleIntLink(link_id = link_count, + src_node = ri, + dst_node = rj)) diff --git a/configs/learning_gem5/part3/simple_ruby.py b/configs/learning_gem5/part3/simple_ruby.py new file mode 100644 index 000000000..bf21be9e1 --- /dev/null +++ b/configs/learning_gem5/part3/simple_ruby.py @@ -0,0 +1,101 @@ +# -*- coding: utf-8 -*- +# Copyright (c) 2015 Jason Power +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer; +# redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution; +# neither the name of the copyright holders nor the names of its +# contributors may be used to endorse or promote products derived from +# this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# Authors: Jason Lowe-Power + +""" This file creates a system with Ruby caches and executes 'threads', a +simple multi-threaded application with false sharing to stress the Ruby +protocol. + +See Part 3 in the Learning gem5 book: learning.gem5.org/book/part3 + +IMPORTANT: If you modify this file, it's likely that the Learning gem5 book + also needs to be updated. For now, email Jason + +""" +from __future__ import print_function + +# import the m5 (gem5) library created when gem5 is built +import m5 +# import all of the SimObjects +from m5.objects import * + +from msi_caches import MyCacheSystem + +# create the system we are going to simulate +system = System() + +# Set the clock fequency of the system (and all of its children) +system.clk_domain = SrcClockDomain() +system.clk_domain.clock = '1GHz' +system.clk_domain.voltage_domain = VoltageDomain() + +# Set up the system +system.mem_mode = 'timing' # Use timing accesses +system.mem_ranges = [AddrRange('512MB')] # Create an address range + +# Create a pair of simple CPUs +system.cpu = [TimingSimpleCPU() for i in range(2)] + +# Create a DDR3 memory controller and connect it to the membus +system.mem_ctrl = DDR3_1600_8x8() +system.mem_ctrl.range = system.mem_ranges[0] + +# create the interrupt controller for the CPU and connect to the membus +for cpu in system.cpu: + cpu.createInterruptController() + +# Create the Ruby System +system.caches = MyCacheSystem() +system.caches.setup(system, system.cpu, [system.mem_ctrl]) + +# get ISA for the binary to run. +isa = str(m5.defines.buildEnv['TARGET_ISA']).lower() + +# Run application and use the compiled ISA to find the binary +binary = 'tests/test-progs/threads/bin/' + isa + '/linux/threads' + +# Create a process for a simple "multi-threaded" application +process = Process() +# Set the command +# cmd is a list which begins with the executable (like argv) +process.cmd = [binary] +# Set the cpu to use the process as its workload and create thread contexts +for cpu in system.cpu: + cpu.workload = process + cpu.createThreads() + +# set up the root SimObject and start the simulation +root = Root(full_system = False, system = system) +# instantiate all of the objects we've created above +m5.instantiate() + +print("Beginning simulation!") +exit_event = m5.simulate() +print('Exiting @ tick {} because {}'.format( + m5.curTick(), exit_event.getCause()) + ) -- 2.30.2