From afd3bd2b03a36a42aa19124a5a8f70c7edfebfd5 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 17 Mar 2010 08:40:35 +0100 Subject: [PATCH] u-boot: further simplify the configuration Remove all the bootsource selection mechanism and the horribly complicated BR2_TARGET_UBOOT_DEFAULT_ENV thing, which wanted to be generic, but was in fact very AT91-specific. Just keep things simple: we build U-Boot with the board configuration file specified in BR2_TARGET_UBOOT_BOARDNAME. Signed-off-by: Thomas Petazzoni --- boot/u-boot/Config.in | 247 ------------------------------------------ boot/u-boot/u-boot.mk | 113 ++----------------- 2 files changed, 8 insertions(+), 352 deletions(-) diff --git a/boot/u-boot/Config.in b/boot/u-boot/Config.in index 78a195d25d..a4f5fd9542 100644 --- a/boot/u-boot/Config.in +++ b/boot/u-boot/Config.in @@ -42,53 +42,6 @@ config BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR Most users may leave this empty -choice - prompt "Bootsource" - depends on BR2_BOOTSOURCE - default BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD - - config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD - bool "Boot from dataflashcard" - depends on BR2_BOOTSOURCE_DATAFLASHCARD - - config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH - bool "Boot from dataflash" - depends on BR2_BOOTSOURCE_DATAFLASH - - config BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH - bool "Boot from a NAND flash" - depends on BR2_BOOTSOURCE_NANDFLASH - - config BR2_TARGET_UBOOT_BOOTSOURCE_FLASH - bool "Boot from a parallell flash" - depends on BR2_BOOTSOURCE_FLASH - - config BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD - bool "Boot from an SD-Card" - depends on BR2_BOOTSOURCE_SDCARD - - config BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM - bool "Boot from a serial EEPROM (Not yet supported)" - depends on BR2_BOOTSOURCE_EEPROM - -endchoice - -config BR2_TARGET_UBOOT_BOOTSOURCE - string - depends on BR2_BOOTSOURCE - default "dataflash" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD - default "dataflash" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH - default "nandflash" if BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH - default "flash" if BR2_TARGET_UBOOT_BOOTSOURCE_FLASH - default "sdcard" if BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD - default "eeprom" if BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM - -config BR2_TARGET_UBOOT_SILENT - bool "silent console" - help - If the option has been enabled, the output can be - silenced by setting the environment variable "silent". - config BR2_TARGET_UBOOT_TOOL_MKIMAGE bool "mkimage tool in target" help @@ -99,165 +52,6 @@ config BR2_TARGET_UBOOT_TOOL_ENV help Install fw_printenv / fw_setenv tools in target. -menuconfig BR2_TARGET_UBOOT_DEFAULT_ENV - bool "Generate a default environment" - help - Will generate variables for factory default command - and autoscript. - -if BR2_TARGET_UBOOT_DEFAULT_ENV -choice - prompt "SDRAM Memory size" - default BR2_TARGET_UBOOT_SDRAM_SIZE_64M - help - Size of the onboard SDRAM - -config BR2_TARGET_UBOOT_SDRAM_SIZE_256MB - bool "256 MB" - -config BR2_TARGET_UBOOT_SDRAM_SIZE_128MB - bool "128 MB" - -config BR2_TARGET_UBOOT_SDRAM_SIZE_64MB - bool "64 MB" - -config BR2_TARGET_UBOOT_SDRAM_SIZE_32MB - bool "32 MB" - -config BR2_TARGET_UBOOT_SDRAM_SIZE_16MB - bool "16 MB" - -config BR2_TARGET_UBOOT_SDRAM_SIZE_8MB - bool "8 MB" - -endchoice - -config BR2_TARGET_UBOOT_MEMORY_SIZE - string - default "256M" if BR2_TARGET_UBOOT_SDRAM_SIZE_256MB - default "128M" if BR2_TARGET_UBOOT_SDRAM_SIZE_128MB - default "64M" if BR2_TARGET_UBOOT_SDRAM_SIZE_64MB - default "32M" if BR2_TARGET_UBOOT_SDRAM_SIZE_32MB - default "16M" if BR2_TARGET_UBOOT_SDRAM_SIZE_16MB - default "8M" if BR2_TARGET_UBOOT_SDRAM_SIZE_8MB - -choice - prompt "Kernel Size" - default BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB - -config BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB - bool "Kernel size is less than 1.25 MB" - -config BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB - bool "Kernel size is less than 1.50 MB" - -config BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB - bool "Kernel size is less than 1.75 MB" - -config BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB - bool "Kernel size is less than 2.00 MB" - -config BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB - bool "Kernel size is less than 2.25 MB" - -config BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB - bool "Kernel size is less than 2.50 MB" - -endchoice - -choice - prompt "Dataflash Size" - depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH - default BR2_TARGET_UBOOT_DATAFLASH_SIZE_2_00MB - -config BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB - bool "Dataflash size is 8 MB" - -config BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB - bool "Dataflash size is 4 MB" - -config BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB - bool "Dataflash size is 2 MB" - -config BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB - bool "Dataflash size is 1 MB" - -config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB - bool "Dataflash size is 0.5 MB" - -config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB - bool "Dataflash size is 0.25 MB" - -endchoice - -config BR2_TARGET_UBOOT_DATAFLASH_SIZE - string - depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH - default "8M" if BR2_TARGET_DATAFLASH_SIZE_8MB - default "4M" if BR2_TARGET_DATAFLASH_SIZE_4MB - default "2M" if BR2_TARGET_DATAFLASH_SIZE_2MB - default "1M" if BR2_TARGET_DATAFLASH_SIZE_1MB - default "0.5M" if BR2_TARGET_DATAFLASH_SIZE_0_50MB - default "0.25M" if BR2_TARGET_DATAFLASH_SIZE_0_25MB - -config BR2_TARGET_UBOOT_END_OF_FLASH - string - depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH - default "C083FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB - default "C041FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB - default "C020FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB - default "C0107FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB - default "C0083FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB - default "C0041FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB - help - -config BR2_TARGET_UBOOT_KERNEL_START - string "Kernel SDRAM address" - default "21000000" - help - Kernel is loaded to this address in SDRAM - -config BR2_TARGET_UBOOT_KERNEL_LOCATION - string "Kernel flash address" - depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || \ - BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH - default "C0042000" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH - default "" - help - Kernel location in dataflash - -config BR2_TARGET_UBOOT_FILESYSTEM_START - string - default "2114A000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB - default "2118C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB - default "211CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB - default "21210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB - default "21252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB - default "21294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB - help - Kernel is loaded to this SDRAM address - Assumes SDRAM starts at 20000000 - Will need to be updated if the SDRAM is located elsewhere - -config BR2_TARGET_UBOOT_FILESYSTEM_LOCATION - string - depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || \ - BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH - default "C018C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB - default "C01CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB - default "C0210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB - default "C0252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB - default "C0294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB - default "C02D6000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB - help - Determine location for File System in Dataflash - This needs to be updated for other memory technologies - -config BR2_TARGET_UBOOT_FILESYSTEM_SIZE - string "File System Size" - default "6000000" - help - menuconfig BR2_TARGET_UBOOT_NETWORK bool "Network Settings" default y @@ -304,45 +98,4 @@ config BR2_TARGET_UBOOT_ETH1ADDR endif # BR2_TARGET_UBOOT_NETWORK -endif # BR2_TARGET_UBOOT_DEFAULT_ENV - endif # BR2_TARGET_UBOOT - -config BR2_BOOTSOURCE_DATAFLASHCARD - bool - help - Allow use of a dataflashcard as a boot source - -config BR2_BOOTSOURCE_DATAFLASH - bool - help - Allow use of a dataflash as a boot source - -config BR2_BOOTSOURCE_NANDFLASH - bool - help - Allow use of a NAND flash as a boot source - -config BR2_BOOTSOURCE_FLASH - bool - help - Allow use of a flash RAM as a boot source - -config BR2_BOOTSOURCE_SDCARD - bool - help - Allow use of an SD-card as a boot source - -config BR2_BOOTSOURCE_EEPROM - bool - help - Allow use of a serial eeprom as a boot source - -config BR2_BOOTSOURCE - bool - default y if BR2_BOOTSOURCE_DATAFLASHCARD - default y if BR2_BOOTSOURCE_DATAFLASH - default y if BR2_BOOTSOURCE_NANDFLASH - default y if BR2_BOOTSOURCE_FLASH - default y if BR2_BOOTSOURCE_SDCARD - default y if BR2_BOOTSOURCE_EEPROM diff --git a/boot/u-boot/u-boot.mk b/boot/u-boot/u-boot.mk index 00724bae6a..a562da25d3 100644 --- a/boot/u-boot/u-boot.mk +++ b/boot/u-boot/u-boot.mk @@ -21,21 +21,9 @@ U_BOOT_DIR:=$(BUILD_DIR)/u-boot-$(U_BOOT_VERSION) U_BOOT_CAT:=$(BZCAT) U_BOOT_BIN:=u-boot.bin -U_BOOT_TOOLS:=$(HOST_DIR)/usr/bin/mkimage -MKIMAGE:=$(U_BOOT_TOOLS) -U_BOOT_AUTOSCRIPT=$(BINARIES_DIR)/autoscript +MKIMAGE:=$(HOST_DIR)/usr/bin/mkimage -U_BOOT_TARGETS:=$(BINARIES_DIR)/$(U_BOOT_BIN) $(U_BOOT_TOOLS) - -ifeq ($(call qstrip,$(BR2_TARGET_UBOOT_DEFAULT_ENV)),y) -U_BOOT_TARGETS += u-boot-autoscript -endif - -TARGET_UBOOT_IPADDR:=$(call qstrip,$(BR2_TARGET_UBOOT_IPADDR)) -TARGET_UBOOT_SERVERIP:=$(call qstrip,$(BR2_TARGET_UBOOT_SERVERIP)) -TARGET_UBOOT_GATEWAY:=$(call qstrip,$(BR2_TARGET_UBOOT_GATEWAY)) -TARGET_UBOOT_NETMASK:=$(call qstrip,$(BR2_TARGET_UBOOT_NETMASK)) -TARGET_UBOOT_ETHADDR:=$(call qstrip,$(BR2_TARGET_UBOOT_ETHADDR)) +U_BOOT_TARGETS:=$(BINARIES_DIR)/$(U_BOOT_BIN) $(MKIMAGE) # u-boot still uses arch=ppc for powerpc U_BOOT_ARCH=$(KERNEL_ARCH:powerpc=ppc) @@ -87,68 +75,38 @@ endif LDFLAGS="$(TARGET_LDFLAGS)" \ $(U_BOOT_CONFIGURE_OPTS) \ $(MAKE) -C $(U_BOOT_DIR) \ - $(UBOOT_BOARD_NAME)_config + $(U_BOOT_BOARD_NAME)_config touch $@ $(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured # Modify configuration header in $(U_BOOT_INC_CONF_FILE) -ifdef BR2_TARGET_UBOOT_DEFAULT_ENV +ifdef BR2_TARGET_UBOOT_NETWORK @echo >> $(U_BOOT_INC_CONF_FILE) @echo "/* Add a wrapper around the values Buildroot sets. */" >> $(U_BOOT_INC_CONF_FILE) @echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE) @echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE) $(call insert_define, DATE, $(DATE)) $(call insert_define, CONFIG_LOAD_SCRIPTS, 1) -endif # BR2_TARGET_UBOOT_DEFAULT_ENV -ifdef BR2_TARGET_UBOOT_NETWORK ifneq ($(strip $(BR2_TARGET_UBOOT_IPADDR)),"") $(call insert_define, CONFIG_IPADDR, $(BR2_TARGET_UBOOT_IPADDR)) +endif ifneq ($(strip $(BR2_TARGET_UBOOT_GATEWAY)),"") $(call insert_define, CONFIG_GATEWAYIP, $(BR2_TARGET_UBOOT_GATEWAY)) endif ifneq ($(strip $(BR2_TARGET_UBOOT_NETMASK)),"") $(call insert_define, CONFIG_NETMASK, $(BR2_TARGET_UBOOT_NETMASK)) endif -endif # end BR2_TARGET_U_BOOT_IPADDR ifneq ($(strip $(BR2_TARGET_UBOOT_SERVERIP)),"") $(call insert_define, CONFIG_SERVERIP, $(BR2_TARGET_UBOOT_SERVERIP)) endif ifneq ($(strip $(BR2_TARGET_UBOOT_ETHADDR)),"") $(call insert_define, CONFIG_ETHADDR, $(BR2_TARGET_UBOOT_ETHADDR)) endif -ifneq ($(strip $(BR2_TARGET_UBOOT_ETH1ADDR)),) ifneq ($(strip $(BR2_TARGET_UBOOT_ETH1ADDR)),"") $(call insert_define, CONFIG_ETH1ADDR, $(BR2_TARGET_UBOOT_ETH1ADDR)) -endif -endif -endif # BR2_TARGET_UBOOT_NETWORK -ifeq ($(BR2_TARGET_UBOOT_SILENT),y) - $(call insert_define, CONFIG_SILENT_CONSOLE,) -endif -ifdef BR2_TARGET_UBOOT_DEFAULT_ENV -ifneq ($(strip $(BR2_TARGET_UBOOT_KERNEL_START)),"") - $(call insert_define, KERNEL_START, $(BR2_TARGET_UBOOT_KERNEL_START)) -endif -ifneq ($(strip $(BR2_TARGET_UBOOT_KERNEL_LOCATION)),"") - $(call insert_define, KERNEL_LOCATION, $(BR2_TARGET_UBOOT_KERNEL_LOCATION)) -endif -ifneq ($(strip $(BR2_TARGET_UBOOT_FILESYSTEM_START)),"") - $(call insert_define, FILESYSTEM_START, $(BR2_TARGET_UBOOT_FILESYSTEM_START)) -endif -ifneq ($(strip $(BR2_TARGET_UBOOT_FILESYSTEM_LOCATION)),"") - $(call insert_define, FILESYSTEM_LOCATION, $(BR2_TARGET_UBOOT_FILESYSTEM_LOCATION)) -endif -ifneq ($(strip $(BR2_TARGET_UBOOT_FILESYSTEM_SIZE)),"") - $(call insert_define, FILESYSTEM_SIZE, $(BR2_TARGET_UBOOT_FILESYSTEM_SIZE)) -endif -ifneq ($(strip $(BR2_TARGET_UBOOT_END_OF_FLASH)),"") - $(call insert_define, END_OF_FLASH, $(BR2_TARGET_UBOOT_END_OF_FLASH)) -endif -ifneq ($(strip $(BR2_TARGET_UBOOT_MEMORY_SIZE)),"") - $(call insert_define, MEMORY_SIZE, $(BR2_TARGET_UBOOT_MEMORY_SIZE)) endif @echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(U_BOOT_INC_CONF_FILE) -endif # BR2_TARGET_UBOOT_DEFAULT_ENV +endif # BR2_TARGET_UBOOT_NETWORK touch $@ $(U_BOOT_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/.header_modified @@ -195,11 +153,9 @@ $(TARGET_DIR)/usr/sbin/fw_printenv: $(U_BOOT_DIR)/.configured u-boot: $(U_BOOT_TARGETS) -u-boot-autoscript: $(U_BOOT_AUTOSCRIPT).img - u-boot-clean: -$(MAKE) -C $(U_BOOT_DIR) clean - rm -f $(U_BOOT_TOOLS) $(U_BOOT_TARGET_TOOLS) + rm -f $(MKIMAGE) $(U_BOOT_TARGET_TOOLS) u-boot-dirclean: rm -rf $(U_BOOT_DIR) @@ -210,59 +166,6 @@ u-boot-unpacked: $(U_BOOT_DIR)/.patched u-boot-configured: $(U_BOOT_DIR)/.header_modified -############################################################# -# -# Generate an autoscript with the configration items -# -############################################################# - -$(U_BOOT_AUTOSCRIPT): .config - rm -f $(U_BOOT_AUTOSCRIPT) -ifneq ($(TARGET_UBOOT_IPADDR),) - echo setenv ipaddr $(TARGET_UBOOT_IPADDR) > $(U_BOOT_AUTOSCRIPT) -else - echo TARGET_UBOOT_IPADDR="$(TARGET_UBOOT_IPADDR)" -endif -ifneq ($(TARGET_UBOOT_SERVERIP),) - echo setenv serverip $(TARGET_UBOOT_SERVERIP) >> $(U_BOOT_AUTOSCRIPT) -endif -ifneq ($(TARGET_UBOOT_GATEWAY),) - echo setenv gatewayip $(TARGET_UBOOT_GATEWAY) >> $(U_BOOT_AUTOSCRIPT) -endif -ifneq ($(TARGET_UBOOT_NETMASK),) - echo setenv netmask $(TARGET_UBOOT_NETMASK) >> $(U_BOOT_AUTOSCRIPT) -endif - echo setenv linux $(LINUX26_KERNEL_NAME) >> $(U_BOOT_AUTOSCRIPT) - echo setenv kernel-version $(LINUX26_VERSION) >> $(U_BOOT_AUTOSCRIPT) - echo setenv kernel-date $(DATE) >> $(U_BOOT_AUTOSCRIPT) - echo setenv hostname $(TARGET_HOSTNAME) >> $(U_BOOT_AUTOSCRIPT) - echo setenv fs-date $(DATE) >> $(U_BOOT_AUTOSCRIPT) - echo setenv rd-1 rootfs.$(ARCH)-$(DATE).ext2 >> $(U_BOOT_AUTOSCRIPT) - echo setenv rd-2 rootfs.$(ARCH)-$(DATE).jffs2 >> $(U_BOOT_AUTOSCRIPT) - echo setenv rd rootfs.$(BR2_ARCH)-$(DATE).ext2 >> $(U_BOOT_AUTOSCRIPT) - echo setenv ver 1 >> $(U_BOOT_AUTOSCRIPT) -ifneq ($(TARGET_UBOOT_ETHADDR),) - echo setenv ethaddr $(TARGET_UBOOT_ETHADDR) >> $(U_BOOT_AUTOSCRIPT) -endif - echo setenv fstype ram >> $(U_BOOT_AUTOSCRIPT) - echo fs >> $(U_BOOT_AUTOSCRIPT) - echo os >> $(U_BOOT_AUTOSCRIPT) - echo setargs >> $(U_BOOT_AUTOSCRIPT) - echo saveenv >> $(U_BOOT_AUTOSCRIPT) - -$(U_BOOT_AUTOSCRIPT).img: $(U_BOOT_AUTOSCRIPT) $(MKIMAGE) - $(MKIMAGE) -A $(ARCH) \ - -O linux \ - -T script \ - -C none \ - -a 0 \ - -e 0 \ - -n "autoscr config" \ - -d $(U_BOOT_AUTOSCRIPT) \ - $(U_BOOT_AUTOSCRIPT).img - - - ############################################################# # # Toplevel Makefile options @@ -272,7 +175,7 @@ ifeq ($(BR2_TARGET_UBOOT),y) TARGETS+=u-boot # we NEED a board name -ifeq ($(UBOOT_BOARD_NAME),) +ifeq ($(U_BOOT_BOARD_NAME),) $(error NO U-Boot board name set. Check your BR2_TARGET_UBOOT_BOARDNAME setting) endif -- 2.30.2