From b42b37824fd9f7cf80017362b43d48912b9a255b Mon Sep 17 00:00:00 2001 From: "K. Richard Pixley" Date: Fri, 24 Apr 1992 22:21:27 +0000 Subject: [PATCH] virgin --- standards.texi | 1313 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1313 insertions(+) create mode 100644 standards.texi diff --git a/standards.texi b/standards.texi new file mode 100644 index 00000000000..21967491915 --- /dev/null +++ b/standards.texi @@ -0,0 +1,1313 @@ +\input texinfo @c -*-texinfo-*- +@c %**start of header +@setfilename standards.text +@settitle GNU Coding Standards +@c %**end of header + +@setchapternewpage off + +@ifinfo +Copyright (C) 1992 Free Software Foundation +Permission is granted to make and distribute verbatim copies of +this manual provided the copyright notice and this permission notice +are preserved on all copies. + +@ignore +Permission is granted to process this file through TeX and print the +results, provided the printed document carries copying permission +notice identical to this one except for the removal of this paragraph +(this paragraph not being relevant to the printed manual). +@end ignore + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided that the entire +resulting derived work is distributed under the terms of a permission +notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions, +except that this permission notice may be stated in a translation approved +by the Free Software Foundation. +@end ifinfo + +@titlepage +@sp 10 +@titlefont{GNU Coding Standards} +@author{Richard Stallman} +@author{last updated 21 April 1992} +@c Note date also appears below. +@page + +@vskip 0pt plus 1filll +Copyright @copyright{} 1992 Free Software Foundation + +Permission is granted to make and distribute verbatim copies of +this manual provided the copyright notice and this permission notice +are preserved on all copies. + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided that the entire +resulting derived work is distributed under the terms of a permission +notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions, +except that this permission notice may be stated in a translation approved +by Free Software Foundation. +@end titlepage + +@ifinfo +@node Top, Reading Non-Free Code, (dir), (dir) +@top Version + +Last updated 21 April 1992. +@c Note date also appears above. +@end ifinfo + +@menu +* Reading Non-Free Code:: Referring to Proprietary Programs +* Contributions:: Accepting Contributions +* Change Logs:: Recording Changes +* Compatibility:: Compatibility with Other Implementations +* Makefiles:: Makefile Conventions +* Configuration:: How Configuration Should Work +* Source Language:: Using Languages Other Than C +* Formatting:: Formatting Your Source Code +* Comments:: Commenting Your Work +* Syntactic Conventions:: Clean Use of C Constructs +* Names:: Naming Variables and Functions +* Using Extensions:: Using Non-standard Features +* Semantics:: Program Behaviour for All Programs +* Errors:: Formatting Error Messages +* Libraries:: Library Behaviour +* Portability:: Portability As It Applies to GNU +* User Interfaces:: Standards for Command Line Interfaces +* Documentation:: Documenting Programs +* Releases:: Making Releases +@end menu + +@node Reading Non-Free Code +@chapter Referring to Proprietary Programs + +Don't in any circumstances refer to Unix source code for or during +your work on GNU! (Or to any other proprietary programs.) + +If you have a vague recollection of the internals of a Unix program, +this does not absolutely mean you can't write an imitation of it, but +do try to organize the imitation internally along different lines, +because this is likely to make the details of the Unix version +irrelevant and dissimilar to your results. + +For example, Unix utilities were generally optimized to minimize +memory use; if you go for speed instead, your program will be very +different. You could keep the entire input file in core and scan it +there instead of using stdio. Use a smarter algorithm discovered more +recently than the Unix program. Eliminate use of temporary files. Do +it in one pass instead of two (we did this in the assembler). + +Or, on the contrary, emphasize simplicity instead of speed. For some +applications, the speed of today's computers makes simpler algorithms +adequate. + +Or go for generality. For example, Unix programs often have static +tables or fixed-size strings, which make for arbitrary limits; use +dynamic allocation instead. Make sure your program handles NULs and +other funny characters in the input files. Add a programming language +for extensibility and write part of the program in that language. + +Or turn some parts of the program into independently usable libraries. +Or use a simple garbage collector instead of tracking precisely when +to free memory, or use a new GNU facility such as obstacks. + + +@node Contributions +@chapter Accepting Contributions + +If someone else sends you a piece of code to add to the program you are +working on, we need legal papers to use it---the same sort of legal +papers we will need to get from you. @emph{Each} significant +contributor to a program must sign some sort of legal papers in order +for us to have clear title to the program. The main author alone is not +enough. + +So, before adding in any contributions from other people, tell us +so we can arrange to get the papers. Then wait until we tell you +that we have received the signed papers, before you actually use the +contribution. + +This applies both before you release the program and afterward. If +you receive diffs to fix a bug, and they make significant change, we +need legal papers for it. + +You don't need papers for changes of a few lines here or there, since +they are not significant for copyright purposes. Also, you don't need +papers if all you get from the suggestion is some ideas, not actual code +which you use. For example, if you write a different solution to the +problem, you don't need to get papers. + +I know this is frustrating; it's frustrating for us as well. But if +you don't wait, you are going out on a limb---for example, what if the +contributor's employer won't sign a disclaimer? You might have to take +that code out again! + +The very worst thing is if you forget to tell us about the other +contributor. We could be very embarrassed in court some day as a +result. + +@node Change Logs +@chapter Change Logs + +Keep a change log for each directory, describing the changes made to +source files in that directory. The purpose of this is so that people +investigating bugs in the future will know about the changes that +might have introduced the bug. Often a new bug can be found by +looking at what was recently changed. More importantly, change logs +can help eliminate conceptual inconsistencies between different parts +of a program; they can give you a history of how the conflicting +concepts arose. + +Use the Emacs command @kbd{M-x add-change} to start a new entry in the +change log. An entry should have an asterisk, the name of the changed +file, and then in parentheses the name of the changed functions, +variables or whatever, followed by a colon. Then describe the changes +you made to that function or variable. + +Separate unrelated entries with blank lines. When two entries +represent parts of the same change, so that they work together, then +don't put blank lines between them. Then you can omit the file name +and the asterisk when successive entries are in the same file. + +Here are some examples: + +@example +* register.el (insert-register): Return nil. +(jump-to-register): Likewise. + +* sort.el (sort-subr): Return nil. + +* tex-mode.el (tex-bibtex-file, tex-file, tex-region): +Restart the tex shell if process is gone or stopped. +(tex-shell-running): New function. + +* expr.c (store_one_arg): Round size up for move_block_to_reg. +(expand_call): Round up when emitting USE insns. +* stmt.c (assign_parms): Round size up for move_block_from_reg. +@end example + +There's no need to describe here the full purpose of the changes or how +they work together. It is better to put this explanation in comments in +the code. That's why just ``New function'' is enough; there is a +comment with the function in the source to explain what it does. + +However, sometimes it is useful to write one line to describe the +overall purpose of a large batch of changes. + +When you change the calling sequence of a function in a simple +fashion, and you change all the callers of the function, there is no +need to make individual entries for all the callers. Just write in +the entry for the function being called, ``All callers changed.'' + +When you change just comments or doc strings, it is enough to write an +entry for the file, without mentioning the functions. Write just, +``Doc fix.'' There's no need to keep a change log for documentation +files. This is because documentation is not susceptible to bugs that +are hard to fix. Documentation does not consist of parts that must +interact in a precisely engineered fashion; to correct an error, you +need not know the history of the erroneous passage. + + +@node Compatibility +@chapter Compatibility with Other Implementations + +With certain exceptions, utility programs and libraries for GNU should +be upward compatible with those in Berkeley Unix, and upward compatible +with @sc{ANSI} C if @sc{ANSI} C specifies their behavior, and upward +compatible with @sc{POSIX} if @sc{POSIX} specifies their behavior. + +When these standards conflict, it is useful to offer compatibility +modes for each of them. + +@sc{ANSI} C and @sc{POSIX} prohibit many kinds of extensions. Feel +free to make the extensions anyway, and include a @samp{--ansi} or +@samp{--compatible} option to turn them off. However, if the extension +has a significant chance of breaking any real programs or scripts, +then it is not really upward compatible. Try to redesign its +interface. + +When a feature is used only by users (not by programs or command +files), and it is done poorly in Unix, feel free to replace it +completely with something totally different and better. (For example, +vi is replaced with Emacs.) But it is nice to offer a compatible +feature as well. (There is a free vi clone, so we offer it.) + +Additional useful features not in Berkeley Unix are welcome. +Additional programs with no counterpart in Unix may be useful, +but our first priority is usually to duplicate what Unix already +has. + + +@node Makefiles +@chapter Makefile Conventions + +This chapter describes conventions for writing Makefiles. + +@menu +* Makefile Basics:: +* Standard Targets:: +* Command Variables:: +* Directory Variables:: +@end menu + +@node Makefile Basics +@section General Conventions for Makefiles + +Every Makefile should contain this line: + +@example +SHELL = /bin/sh +@end example + +@noindent +to avoid trouble on systems where the @code{SHELL} variable might be +inherited from the environment. + +Don't assume that @file{.} is in the path for command execution. When +you need to run programs that are files in the current directory, always +use @file{./} to make sure the proper file is run regardless of the +current path. + +@node Standard Targets +@section Standard Targets for Users + +All GNU programs should have the following targets in their Makefiles: + +@table @samp +@item all +Compile the entire program. + +@item install +Compile the program and copy the executables, libraries, and so on to +the file names where they should reside for actual use. If there is a +simple test to verify that a program is properly installed then run that +test. + +@item clean +Delete all files from the current directory that are normally created by +building the program. Don't delete the files that record the +configuration. Also preserve files that could be made by building, but +normally aren't because the distribution comes with them. + +@item distclean +Delete all files from the current directory that are created by +configuring or building the program. This should leave only the files +that would be in the distribution. + +@item mostlyclean +Like @samp{clean}, but may refrain from deleting a few files that people +normally don't want to recompile. For example, the @samp{mostlyclean} +target for GCC does not delete @file{libgcc.a}, because recompiling it +is rarely necessary and takes a lot of time. + +@item realclean +Delete everything from the current directory that can be reconstructed +with this Makefile. This typically includes everything deleted by +distclean, plus more: C source files produced by Bison, tags tables, +info files, and so on. + +@item TAGS +Update a tags table for this program. + +@item dist +Create a distribution tar file for this program. The tar file should be +set up so that the file names in the tar file start with a subdirectory +name which is the name of the package it is a distribution for. This +name can include the version number. + +For example, the distribution tar file of GCC version 1.40 unpacks into +a subdirectory named @file{gcc-1.40}. + +The easiest way to do this is to create a subdirectory appropriately +named, use @code{ln} or @code{cp} to install the proper files in it, and +then @code{tar} that subdirectory. + +The @code{dist} target should explicitly depend on all non-source files +that are in the distribution, to make sure they are up to date in the +distribution. @xref{Releases}. + +@item check +Perform self-tests (if any). The user must build the program before +running the tests, but need not install the program; you should write +the self-tests so that they work when the program is built but not +installed. +@end table + +@node Command Variables +@section Variables for Specifying Commands + +Makefiles should provide variables for overriding certain commands, options, +and so on. + +In particular, you should run most utility programs via variables. +Thus, if you use Bison, have a variable named @code{BISON} whose default +value is set with @samp{BISON = bison}, and refer to it with +@code{$(BISON)} whenever you need to use Bison. + +Each program-name variable should come with an options variable that is +used to supply options to the program. Append @samp{FLAGS} to the +program-name variable name to get the options variable name---for +example, @code{BISONFLAGS}. (The name @code{CFLAGS} is an exception to +this rule, but we keep it because it is standard.) + +File-management utilities such as @code{ln}, @code{rm}, @code{mv}, and +so on need not be referred to through variables in this way, since users +don't need to replace them with other programs. + +Every Makefile should define the variable @code{INSTALL}, which is the +basic command for installing a file into the system. + +Every Makefile should also define variables @code{INSTALL_PROGRAM} and +@code{INSTALL_DATA}. (The default for each of these should be +@code{$(INSTALL)}.) Then it should use those variables as the commands +for actual installation, for executables and nonexecutables +respectively. Use these variables as follows: + +@example +$(INSTALL_PROGRAM) foo $@{bindir@}/foo +$(INSTALL_DATA) libfoo.a $@{libdir@}/libfoo.a +@end example + +@noindent +(Always use a file name, not a directory name, as the second argument. +Use a separate command for each file to be installed.) + +@node Directory Variables +@section Variables for Installation Directories + +Installation directories should always be named by variables, so it is +easy to install in a nonstandard place. The standard names for these +variables are: + +@table @samp +@item bindir +The directory for installing executable programs that users can run. +This should normally be @file{/usr/local/bin}, but it should be based on +the value of @code{$(prefix)}. + +@item datadir +The directory for installing read-only data files which the programs +refer to while they run. This directory is used for files which are +independent of the type of machine being used. This should normally be +@file{/usr/local/lib}, but it should be based on the value of +@code{$(prefix)}. + +@item statedir +The directory for installing data files which the programs modify while +they run. These files should be independent of the type of machine +being used, and it should be possible to share them among machines at a +network installation. This should normally be @file{/usr/local/lib}, +but it should be based on the value of @code{$(prefix)}. + +@item libdir +The directory for installing executable files to be run by the program +rather than by users. Object files and libraries of object code should +also go in this directory. The idea is that this directory is used for +files that pertain to a specific machine architecture. This should +normally be @file{/usr/local/lib}, but it should be based on the value of +@code{$(prefix)}. + +@item includedir +The directory for installing @samp{#include} header files to be included +by user programs. This should normally be @file{/usr/local/include}, +but it should be based on the value of @code{$(prefix)}. + +Most compilers other than GCC do not look for header files in +@file{/usr/local/include}. So installing the header files this way is +only useful with GCC. Sometimes this is not a problem because some +libraries are only really intended to work with GCC. But some libraries +are intended to work with other compilers. They should install their +header files in two places, one specified by includedir and one +specified by oldincludedir + +@item oldincludedir +The directory for installing @samp{#include} header files for use with +compilers other than GCC. This should normally be @file{/usr/include}. + +The Makefile commands should check whether the value of +@code{oldincludedir} is empty. If it is, they should not try to use +it; they should cancel the second installation of the header files. + +@item mandir +The directory for installing the man pages (if any) for this package. +It should include the suffix for the proper section of the +manual---usually @samp{1} for a utility. + +@item man1dir +The directory for installing section 1 man pages. +@item man2dir +The directory for installing section 2 man pages. +@item @dots{} +Use these names instead of @samp{mandir} if the package needs to install man +pages in more than one section of the manual. + +@strong{Don't make the primary documentation for any GNU software be a +man page. Write a manual in Texinfo instead. Man pages are just for +the sake of people running GNU software on Unix, which is a secondary +application only.} + +@item manext +The file name extension for the installed man page. This should contain +a period followed by the appropriate digit. + +@item infodir +The directory for installing the info files for this package. By +default, it should be @file{/usr/local/info}, but it should be based on the +value of @code{$(prefix)}. + +@item srcdir +The directory for the sources being compiled. The value of this +variable is normally inserted by the @code{configure} shell script. + +@item prefix +A prefix used in constructing the default values of the variables listed +above. The default value of @code{prefix} should be @file{/usr/local} +(at least for now). +@end table + +For example: + +@example +# Common prefix for installation directories. +# NOTE: This directory must exist when you start installation. +prefix = /usr/local +# Directory in which to put the executable for the command `gcc' +bindir = $(prefix)/bin +# Directory in which to put the directories used by the compiler. +libdir = $(prefix)/lib +@end example + + +@node Configuration +@chapter How Configuration Should Work + +Each GNU distribution should come with a shell script named +@code{configure}. This script is given arguments which describe the +kind of machine and system you want to compile the program for. + +The @code{configure} script must record the configuration options so +that they affect compilation. + +One way to do this is to make a link from a standard name such as +@file{config.h} to the proper configuration file for the chosen system. +If you use this technique, the distribution should @emph{not} contain a +file named @file{config.h}. This is so that people won't be able to +build the program without configuring it first. + +Another thing that @code{configure} can do is to edit the Makefile. If +you do this, the distribution should @emph{not} contain a file named +@file{Makefile}. Instead, include a file @file{Makefile.in} which +contains the input used for editing. Once again, this is so that people +won't be able to build the program without configuring it first. + +If @code{configure} does write the @file{Makefile}, then @file{Makefile} +should have a target named @file{Makefile} which causes @code{configure} +to be rerun, setting up the same configuration that was set up last +time. The files that @code{configure} reads should be listed as +dependencies of @file{Makefile}. + +All the files which are output from the @code{configure} script should +have comments at the beginning explaining that they were generated +automatically using @code{configure}. This is so that users won't think +of trying to edit them by hand. + +The @code{configure} script should write a file named @file{config.status} +which describes which configuration options were specified when the +program was last configured. This file should be a shell script which, +if run, will recreate the same configuration. + +The @code{configure} script should accept an option of the form +@samp{--srcdir=@var{dirname}} to specify the directory where sources are found +(if it is not the current directory). This makes it possible to build +the program in a separate directory, so that the actual source directory +is not modified. + +If the user does not specify @samp{--srcdir}, then @code{configure} should +check both @file{.} and @file{..} to see if it can find the sources. If +it finds the sources in one of these places, it should use them from +there. Otherwise, it should report that it cannot find the sources, and +should exit with nonzero status. + +Usually the easy way to support @samp{--srcdir} is by editing a +definition of @code{VPATH} into the Makefile. Some rules may need to +refer explicitly to the specified source directory. To make this +possible, @code{configure} can add to the Makefile a variable named +@code{srcdir} whose value is precisely the specified directory. + +The @code{configure} script should also take an argument which specifies the +type of system to build the program for. This argument should look like +this: + +@example +@var{cpu}-@var{company}-@var{system} +@end example + +For example, a Sun 3 might be @samp{m68k-sun-sunos4.1}. + +The @code{configure} script needs to be able to decode all plausible +alternatives for how to describe a machine. Thus, @samp{sun3-sunos4.1} +would be a valid alias. So would @samp{sun3-bsd4.2}, since Sunos is +basically @sc{BSD} and no other @sc{BSD} system is used on a Sun. For many +programs, @samp{vax-dec-ultrix} would be an alias for +@samp{vax-dec-bsd}, simply because the differences between Ultrix and +@sc{BSD} are rarely noticeable, but a few programs might need to distinguish +them. + +There is a shell script called @file{config.sub} that you can use +as a subroutine to validate system types and canonicalize aliases. + +Other options are permitted to specify in more detail the software +or hardware are present on the machine: + +@table @samp +@item --with-@var{package} +The package @var{package} will be installed, so configure this package +to work with @var{package}. + +Possible values of @var{package} include @samp{x}, @samp{gnu-as} (or +@samp{gas}), @samp{gnu-ld}, @samp{gnu-libc}, and @samp{gdb}. + +@item --nfp +The target machine has no floating point processor. + +@item --gas +The target machine assembler is GAS, the GNU assembler. +This is obsolete; use @samp{--with-gnu-as} instead. + +@item --x +The target machine has the X Window system installed. +This is obsolete; use @samp{--with-x} instead. +@end table + +All @code{configure} scripts should accept all of these ``detail'' +options, whether or not they make any difference to the particular +package at hand. In particular, they should accept any option that +starts with @samp{--with-}. This is so users will be able to configure +an entire GNU source tree at once with a single set of options. + +Packages that perform part of compilation may support cross-compilation. +In such a case, the host and target machines for the program may be +different. The @code{configure} script should normally treat the +specified type of system as both the host and the target, thus producing +a program which works for the same type of machine that it runs on. + +The way to build a cross-compiler, cross-assembler, or what have you, is +to specify the option @samp{--host=@var{hosttype}} when running +@code{configure}. This specifies the host system without changing the +type of target system. The syntax for @var{hosttype} is the same as +described above. + +Programs for which cross-operation is not meaningful need not accept the +@samp{--host} option, because configuring an entire operating system for +cross-operation is not a meaningful thing. + +Some programs have ways of configuring themselves automatically. If +your program is set up to do this, your @code{configure} script can simply +ignore most of its arguments. + + +@node Source Language +@chapter Using Languages Other Than C + +Using a language other than C is like using a non-standard feature: it +will cause trouble for users. Even if GCC supports the other language, +users may find it inconvenient to have to install the compiler for that +other language in order to build your program. So please write in C. + +There are three exceptions for this rule: + +@itemize @bullet +@item +It is okay to use a special language if the same program contains an +interpreter for that language. + +Thus, it is not a problem that GNU Emacs contains code written in Emacs +Lisp, because it comes with a Lisp interpreter. + +@item +It is okay to use another language in a tool specifically intended for +use with that language. + +This is okay because the only people who want to build the tool will be +those who have installed the other language anyway. + +@item +If an application is not of extremely widespread interest, then perhaps +it's not important if the application is inconvenient to install. +@end itemize + +@node Formatting +@chapter Formatting Your Source Code + +It is important to put the open-brace that starts the body of a C +function in column zero, and avoid putting any other open-brace or +open-parenthesis or open-bracket in column zero. Several tools look +for open-braces in column zero to find the beginnings of C functions. +These tools will not work on code not formatted that way. + +It is also important for function definitions to start the name of the +function in column zero. This helps people to search for function +definitions, and may also help certain tools recognize them. Thus, +the proper format is this: + +@example +static char * +concat (s1, s2) /* Name starts in column zero here */ + char *s1, *s2; +@{ /* Open brace in column zero here */ + @dots{} +@} +@end example + +@noindent +or, if you want to use @sc{ANSI} C, format the definition like this: + +@example +static char * +concat (char *s1, char *s2) +@{ + @dots{} +@} +@end example + +In @sc{ANSI} C, if the arguments don't fit nicely on one line, +split it like this: + +@example +int +lots_of_args (int an_integer, long a_long, short a_short, + double a_double, float a_float) +@dots{} +@end example + +For the body of the function, we prefer code formatted like this: + +@example +if (x < foo (y, z)) + haha = bar[4] + 5; +else + @{ + while (z) + @{ + haha += foo (z, z); + z--; + @} + return ++x + bar (); + @} +@end example + +We find it easier to read a program when it has spaces before the +open-parentheses and after the commas. Especially after the commas. + +When you split an expression into multiple lines, split it +before an operator, not after one. Here is the right way: + +@example +if (foo_this_is_long && bar > win (x, y, z) + && remaining_condition) +@end example + +Try to avoid having two operators of different precedence at the same +level of indentation. For example, don't write this: + +@example +mode = (inmode[j] == VOIDmode + || GET_MODE_SIZE (outmode[j]) > GET_MODE_SIZE (inmode[j]) + ? outmode[j] : inmode[j]); +@end example + +Instead, use extra parentheses so that the indentation shows the nesting: + +@example +mode = ((inmode[j] == VOIDmode + || (GET_MODE_SIZE (outmode[j]) > GET_MODE_SIZE (inmode[j]))) + ? outmode[j] : inmode[j]); +@end example + +Insert extra parentheses so that Emacs will indent the code properly. +For example, the following indentation looks nice if you do it by hand, +but Emacs would mess it up: + +@example +v = rup->ru_utime.tv_sec*1000 + rup->ru_utime.tv_usec/1000 + + rup->ru_stime.tv_sec*1000 + rup->ru_stime.tv_usec/1000; +@end example + +But adding a set of parentheses solves the problem: + +@example +v = (rup->ru_utime.tv_sec*1000 + rup->ru_utime.tv_usec/1000 + + rup->ru_stime.tv_sec*1000 + rup->ru_stime.tv_usec/1000); +@end example + +Format do-while statements like this: + +@example +do + @{ + a = foo (a); + @} +while (a > 0); +@end example + +Please use formfeed characters (control-L) to divide the program into +pages at logical places (but not within a function). It does not matter +just how long the pages are, since they do not have to fit on a printed +page. The formfeeds should appear alone on lines by themselves. + + +@node Comments +@chapter Commenting Your Work + +Every program should start with a comment saying briefly what it is for. +Example: @samp{fmt - filter for simple filling of text}. + +Please put a comment on each function saying what the function does, +what sorts of arguments it gets, and what the possible values of +arguments mean and are used for. It is not necessary to duplicate in +words the meaning of the C argument declarations, if a C type is being +used in its customary fashion. If there is anything nonstandard about +its use (such as an argument of type @code{char *} which is really the +address of the second character of a string, not the first), or any +possible values that would not work the way one would expect (such as, +that strings containing newlines are not guaranteed to work), be sure +to say so. + +Also explain the significance of the return value, if there is one. + +Please put two spaces after the end of a sentence in your comments, so +that the Emacs sentence commands will work. Also, please write +complete sentences and capitalize the first word. If a lower-case +identifer comes at the beginning of a sentence, don't capitalize it! +Changing the spelling makes it a different identifier. If you don't +like starting a sentence with a lower case letter, write the sentence +differently (e.g. ``The identifier lower-case is @dots{}''). + +The comment on a function is much clearer if you use the argument +names to speak about the argument values. The variable name itself +should be lower case, but write it in upper case when you are speaking +about the value rather than the variable itself. Thus, ``the inode +number @var{node_num}'' rather than ``an inode''. + +There is usually no purpose in restating the name of the function in +the comment before it, because the reader can see that for himself. +There might be an exception when the comment is so long that the function +itself would be off the bottom of the screen. + +There should be a comment on each static variable as well, like this: + +@example +/* Nonzero means truncate lines in the display; + zero means continue them. */ + +int truncate_lines; +@end example + +Every @samp{#endif} should have a comment, except in the case of short +conditionals (just a few lines) that are not nested. The comment should +state the condition of the conditional that is ending, @emph{including +its sense}. @samp{#else} should have a comment describing the condition +@emph{and sense} of the code that follows. For example: + +@example +#ifdef foo + @dots{} +#else /* not foo */ + @dots{} +#endif /* not foo */ +@end example + +@noindent +but, by contrast, write the comments this way for a @samp{#ifndef}: + +@example +#ifndef foo + @dots{} +#else /* foo */ + @dots{} +#endif /* foo */ +@end example + + +@node Syntactic Conventions +@chapter Clean Use of C Constructs + +Please explicitly declare all arguments to functions. +Don't omit them just because they are ints. + +Declarations of external functions and functions to appear later +in the source file should all go in one place near the beginning of +the file (somewhere before the first function definition in the file), +or else should go in a header file. Don't put extern declarations +inside functions. + +Don't declare multiple variables in one declaration that spans lines. +Start a new declaration on each line, instead. For example, instead +of this: + +@example +int foo, + bar; +@end example + +@noindent +write either this: + +@example +int foo, bar; +@end example + +@noindent +or this: + +@example +int foo; +int bar; +@end example + +@noindent +(If they are global variables, each should have a comment preceding it +anyway.) + +When you have an if-else statement nested in another if statement, +always put braces around the if-else. Thus, never write like this: + +@example +if (foo) + if (bar) + win (); + else + lose (); +@end example + +@noindent +always like this: + +@example +if (foo) + @{ + if (bar) + win (); + else + lose (); + @} +@end example + +If you have an if statement nested inside of an else statement, +either write @code{else if} on one line, like this, + +@example +if (foo) + @dots{} +else if (bar) + @dots{} +@end example + +@noindent +with its then-part indented like the preceding then-part, or write the +nested if within braces like this: + +@example +if (foo) + @dots{} +else + @{ + if (bar) + @dots{} + @} +@end example + +Don't declare both a structure tag and variables or typedefs in the +same declaration. Instead, declare the structure tag separately +and then use it to declare the variables or typedefs. + +Try to avoid assignments inside if-conditions. For example, don't +write this: + +@example +if ((foo = (char *) malloc (sizeof *foo)) == 0) + fatal ("virtual memory exhausted"); +@end example + +@noindent +instead, write this: + +@example +foo = (char *) malloc (sizeof *foo); +if (foo == 0) + fatal ("virtual memory exhausted"); +@end example + +Don't make the program ugly to placate lint. Please don't insert any +casts to void. Zero without a cast is perfectly fine as a null +pointer constant. + + +@node Names +@chapter Naming Variables and Functions + +Please use underscores to separate words in a name, so that the Emacs +word commands can be useful within them. Stick to lower case; reserve +upper case for macros and enum constants, and for name-prefixes that +follow a uniform convention. + +For example, you should use names like @code{ignore_space_change_flag}; +don't use names like @code{iCantReadThis}. + +Variables that indicate whether command-line options have been +specified should be named after the meaning of the option, not after +the option-letter. A comment should state both the exact meaning of +the option and its letter. For example, + +@example +/* Ignore changes in horizontal whitespace (-b). */ +int ignore_space_change_flag; +@end example + +When you want to define names with constant integer values, use +@code{enum} rather than @samp{#define}. GDB knows about enumeration +constants. + +Use file names of 14 characters or less, to avoid creating gratuitous +problems on System V. + + +@node Using Extensions +@chapter Using Non-standard Features + +Many GNU facilities that already exist support a number of convenient +extensions over the comparable Unix facilities. Whether to use these +extensions in implementing your program is a difficult question. + +On the one hand, using the extensions can make a cleaner program. +On the other hand, people will not be able to build the program +unless the other GNU tools are available. This might cause the +program to work on fewer kinds of machines. + +With some extensions, it might be easy to provide both alternatives. +For example, you can define functions with a ``keyword'' @code{INLINE} +and define that as a macro to expand into either @code{inline} or +nothing, depending on the compiler. + +In general, perhaps it is best not to use the extensions if you can +straightforwardly do without them, but to use the extensions if they +are a big improvement. + +An exception to this rule are the large, established programs (such as +Emacs) which run on a great variety of systems. Such programs would +be broken by use of GNU extensions. + +Another exception is for programs that are used as part of +compilation: anything that must be compiled with other compilers in +order to bootstrap the GNU compilation facilities. If these require +the GNU compiler, then no one can compile them without having them +installed already. That would be no good. + +Since most computer systems do not yet implement @sc{ANSI} C, using the +@sc{ANSI} C features is effectively using a GNU extension, so the +same considerations apply. (Except for @sc{ANSI} features that we +discourage, such as trigraphs---don't ever use them.) + +@node Semantics +@chapter Program Behaviour for All Programs + +Avoid arbitrary limits on the length or number of @emph{any} data +structure, including filenames, lines, files, and symbols, by allocating +all data structures dynamically. In most Unix utilities, ``long lines +are silently truncated''. This is not acceptable in a GNU utility. + +Utilities reading files should not drop NUL characters, or any other +nonprinting characters @emph{including those with codes above 0177}. The +only sensible exceptions would be utilities specifically intended for +interface to certain types of printers that can't handle those characters. + +Check every system call for an error return, unless you know you wish to +ignore errors. Include the system error text (from @code{perror} or +equivalent) in @emph{every} error message resulting from a failing +system call, as well as the name of the file if any and the name of the +utility. Just ``cannot open foo.c'' or ``stat failed'' is not +sufficient. + +Check every call to @code{malloc} or @code{realloc} to see if it +returned zero. Check @code{realloc} even if you are making the block +smaller; in a system that rounds block sizes to a power of 2, +@code{realloc} may get a different block if you ask for less space. + +In Unix, @code{realloc} can destroy the storage block if it returns +zero. GNU @code{realloc} does not have this bug: if it fails, the +original block is unchanged. Feel free to assume the bug is fixed. If +you wish to run your program on Unix, and wish to avoid lossage in this +case, you can use the GNU @code{malloc}. + +You must expect @code{free} to alter the contents of the block that was +freed. Anything you want to fetch from the block, you must fetch before +calling @code{free}. + +Use @code{getopt_long} to decode arguments, unless the argument syntax +makes this unreasonable. + +When static storage is to be written in during program execution, use +explicit C code to initialize it. Reserve C initialized declarations +for data that will not be changed. + +Try to avoid low-level interfaces to obscure Unix data structures (such +as file directories, utmp, or the layout of kernel memory), since these +are less likely to work compatibly. If you need to find all the files +in a directory, use @code{readdir} or some other high-level interface. These +will be supported compatibly by GNU. + +By default, the GNU system will provide the signal handling +functions of @sc{BSD} and of @sc{POSIX}. So GNU software should be +written to use these. + +In error checks that detect ``impossible'' conditions, just abort. +There is usually no point in printing any message. These checks +indicate the existence of bugs. Whoever wants to fix the bugs will have +to read the source code and run a debugger. So explain the problem with +comments in the source. The relevant data will be in variables, which +are easy to examine with the debugger, so there is no point moving them +elsewhere. + + +@node Errors +@chapter Formatting Error Messages + +Error messages from compilers should look like this: + +@example +@var{source-file-name}:@var{lineno}: @var{message} +@end example + +Error messages from other noninteractive programs should look like this: + +@example +@var{program}:@var{source-file-name}:@var{lineno}: @var{message} +@end example + +@noindent +when there is an appropriate source file, or like this: + +@example +@var{program}: @var{message} +@end example + +@noindent +when there is no relevant source file. + +In an interactive program (one that is reading commands from a +terminal), it is better not to include the program name in an error +message. The place to indicate which program is running is in the +prompt or with the screen layout. (When the same program runs with +input from a source other than a terminal, it is not interactive and +would do best to print error messages using the noninteractive style.) + +The string @var{message} should not begin with a capital letter when +it follows a program name and/or filename. Also, it should not end +with a period. + +Error messages from interactive programs, and other messages such as +usage messages, should start with a capital letter. But they should not +end with a period. + + +@node Libraries +@chapter Library Behaviour + +Try to make library functions reentrant. If they need to do dynamic +storage allocation, at least try to avoid any nonreentrancy aside from +that of @code{malloc} itself. + +Here are certain name conventions for libraries, to avoid name +conflicts. + +Choose a name prefix for the library, more than two characters long. +All external function and variable names should start with this +prefix. In addition, there should only be one of these in any given +library member. This usually means putting each one in a separate +source file. + +An exception can be made when two external symbols are always used +together, so that no reasonable program could use one without the +other; then they can both go in the same file. + +External symbols that are not documented entry points for the user +should have names beginning with @samp{_}. They should also contain +the chosen name prefix for the library, to prevent collisions with +other libraries. These can go in the same files with user entry +points if you like. + +Static functions and variables can be used as you like and need not +fit any naming convention. + + +@node Portability +@chapter Portability As It Applies to GNU + +Much of what is called ``portability'' in the Unix world refers to +porting to different Unix versions. This is not relevant to GNU +software, because its purpose is to run on top of one and only +one kernel, the GNU kernel, compiled with one and only one C +compiler, the GNU C compiler. The amount and kinds of variation +among GNU systems on different cpu's will be like the variation +among Berkeley 4.3 systems on different cpu's. + +It is difficult to be sure exactly what facilities the GNU kernel +will provide, since it isn't finished yet. Therefore, assume you can +use anything in 4.3; just avoid using the format of semi-internal data +bases (e.g., directories) when there is a higher-level alternative +(readdir). + +You can freely assume any reasonably standard facilities in the C +language, libraries or kernel, because we will find it necessary to +support these facilities in the full GNU system, whether or not we +have already done so. The fact that there may exist kernels or C +compilers that lack these facilities is irrelevant as long as the GNU +kernel and C compiler support them. + +It remains necessary to worry about differences among cpu types, such +as the difference in byte ordering and alignment restrictions. It's +unlikely that 16-bit machines will ever be supported by GNU, so there +is no point in spending any time to consider the possibility that an +int will be less than 32 bits. + +You can assume that all pointers have the same format, regardless +of the type they point to, and that this is really an integer. +There are some weird machines where this isn't true, but they aren't +important; don't waste time catering to them. Besides, eventually +we will put function prototypes into all GNU programs, and that will +probably make your program work even on weird machines. + +Since some important machines (including the 68000) are big-endian, +it is important not to assume that the address of an int object +is also the address of its least-significant byte. Thus, don't +make the following mistake: + +@example +int c; +@dots{} +while ((c = getchar()) != EOF) + write(file_descriptor, &c, 1); +@end example + +You can assume that it is reasonable to use a meg of memory. Don't +strain to reduce memory usage unless it can get to that level. If +your program creates complicated data structures, just make them in +core and give a fatal error if malloc returns zero. + +If a program works by lines and could be applied to arbitrary +user-supplied input files, it should keep only a line in memory, because +this is not very hard and users will want to be able to operate on input +files that are bigger than will fit in core all at once. + + +@node User Interfaces +@chapter Standards for Command Line Interfaces + +Please don't make the behavior of a utility depend on the name used +to invoke it. It is useful sometimes to make a link to a utility +with a different name, and that should not change what it does. + +Instead, use a run time option or a compilation switch or both +to select among the alternate behaviors. + +It is a good idea to follow the @sc{POSIX} guidelines for the +command-line options of a program. The easiest way to do this is to use +@code{getopt} to parse them. Note that the GNU version of @code{getopt} +will normally permit options anywhere among the arguments unless the +special argument @samp{--} is used. This is not what @sc{POSIX} +specifies; it is a GNU extension. + +Please define long-named options that are equivalent to the +single-letter Unix-style options. We hope to make GNU more user +friendly this way. This is easy to do with the GNU function +@code{getopt_long}. + +It is usually a good idea for file names given as ordinary arguments +to be input files only; any output files would be specified using +options (preferably @samp{-o}). Even if you allow an output file name +as an ordinary argument for compatibility, try to provide a suitable +option as well. This will lead to more consistency among GNU +utilities, so that there are fewer idiosyncracies for users to +remember. + +Programs should support an option @samp{--version} which prints the +program's version number, and an option @samp{--help} which prints +option usage information. + + +@node Documentation +@chapter Documenting Programs + +Please use Texinfo for documenting GNU programs. See the Texinfo +manual, either the hardcopy or the version in the GNU Emacs Info +sub-system (@kbd{C-h i}). + +See existing GNU texinfo files (e.g. those under the @file{man/} +directory in the GNU Emacs Distribution) for examples. + +The title page of the manual should state the version of the program +which the manual applies to. The Top node of the manual should also +contain this information. If the manual is changing more frequently +than or independent of the program, also state a version number for +the manual in both of these places. + +The manual should document all command-line arguments and all +commands. It should give examples of their use. But don't organize +the manual as a list of features. Instead, organize it by the +concepts a user will have before reaching that point in the manual. +Address the goals that a user will have in mind, and explain how to +accomplish them. + + +@node Releases +@chapter Making Releases + +Package the distribution of Foo version 69.96 in a tar file named +@file{foo-69.96.tar}. It should unpack into a subdirectory named +@file{foo-69.96}. + +Building and installing the program should never modify any of the files +contained in the distribution. This means that all the files that form +part of the program in any way must be classified into @dfn{source +files} and @dfn{non-source files}. Source files are written by humans +and never changed automatically; non-source files are produced from +source files by programs under the control of the Makefile. + +Naturally, all the source files must be in the distribution. It is okay +to include non-source files in the distribution, provided they are +up-to-date and machine-independent, so that building the distribution +normally will never modify them. We commonly included non-source files +produced by Bison, Lex, @TeX{}, and Makeinfo; this helps avoid +unnecessary dependencies between our distributions, so that users can +install whichever packages they want to install. + +Non-source files that might actually be modified by building and +installing the program should @strong{never} be included in the +distribution. So if you do distribute non-source files, always make +sure they are up to date when you make a new distribution. + +Make sure that no file name in the distribution is no more than 14 +characters long. Nowadays, there are systems that adhere to a foolish +interpretation of the POSIX standard which holds that they should refuse +to open a longer name, rather than truncating as they did in the past. + +Try to make sure that all the file names will be unique on MS-DOG. A +name on MS-DOG consists of up to 8 characters, optionally followed by a +period and up to three characters. MS-DOG will truncate extra +characters both before and after the period. Thus, +@file{foobarhacker.c} and @file{foobarhacker.o} are not ambiguous; they +are truncated to @file{foobarhac.c} and @file{foobarhac.o}, which are +distinct. + +Include in your distribution a copy of the @file{texinfo.tex} you used +to test print any @file{*.texinfo} files. + +@bye -- 2.30.2