From b58ff724f6c87aa57b093d41ab1b951d9edcbf8e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 10 Jun 2020 16:47:18 +1000 Subject: [PATCH] litedram: Add stash buffer to the L2 cache wishbone interface This breaks the long stall signal coming back to the processor and helps improve overall timing. Signed-off-by: Benjamin Herrenschmidt --- litedram/extras/litedram-wrapper-l2.vhdl | 71 ++++++++++++++++-------- 1 file changed, 49 insertions(+), 22 deletions(-) diff --git a/litedram/extras/litedram-wrapper-l2.vhdl b/litedram/extras/litedram-wrapper-l2.vhdl index 468ecfe..a6f682a 100644 --- a/litedram/extras/litedram-wrapper-l2.vhdl +++ b/litedram/extras/litedram-wrapper-l2.vhdl @@ -239,8 +239,10 @@ architecture behaviour of litedram_wrapper is REFILL_WAIT_ACK); -- Cache refill wait ack signal state : state_t; - -- Latched WB request. - signal wb_req : wishbone_master_out := wishbone_master_out_init; + -- Latched WB request + signal wb_req : wishbone_master_out := wishbone_master_out_init; + -- Stashed WB request + signal wb_stash : wishbone_master_out := wishbone_master_out_init; -- Read pipeline (to handle cache RAM latency) signal read_ack_0 : std_ulogic; @@ -267,6 +269,7 @@ architecture behaviour of litedram_wrapper is signal req_we : std_ulogic_vector(DRAM_SBITS-1 downto 0); signal req_wdata : std_ulogic_vector(DRAM_DBITS-1 downto 0); signal accept_store : std_ulogic; + signal stall : std_ulogic; -- Line refill command signals and latches signal refill_cmd_valid : std_ulogic; @@ -574,30 +577,54 @@ begin request_latch: process(system_clk) begin if rising_edge(system_clk) then - -- We can latch a new request if we are idle (for now). We also - -- latch the absence of request. This is a pipeline that takes - -- one per-cycle unless non-IDLE. - -- - if wb_out.stall = '0' then - -- Avoid constantly updating addr/data for unrelated requests - if wb_in.cyc = '1' then - wb_req <= wb_in; + + -- Implement a stash buffer. If we are stalled and stash is + -- free, fill it up. This will generate a WB stall on the + -- next cycle. + if stall = '1' and wb_out.stall = '0' and wb_in.cyc = '1' and wb_in.stb = '1' then + wb_stash <= wb_in; + if TRACE then + report "stashed wb req ! addr:" & to_hstring(wb_in.adr) & + " we:" & std_ulogic'image(wb_in.we) & + " sel:" & to_hstring(wb_in.sel); + end if; + end if; + + -- We aren't stalled, see what we can do + if stall = '0' then + if wb_stash.cyc = '1' then + -- Something in stash ! use it and clear stash + wb_req <= wb_stash; + wb_stash.cyc <= '0'; + if TRACE then + report "unstashed wb req ! addr:" & to_hstring(wb_stash.adr) & + " we:" & std_ulogic'image(wb_stash.we) & + " sel:" & to_hstring(wb_stash.sel); + end if; else - wb_req.cyc <= wb_in.cyc; - wb_req.stb <= wb_in.stb; - end if; + -- Grab request from WB + if wb_in.cyc = '1' then + wb_req <= wb_in; + else + wb_req.cyc <= wb_in.cyc; + wb_req.stb <= wb_in.stb; + end if; - if TRACE then - if wb_in.cyc = '1' and wb_in.stb = '1' then - report "latch new wb req ! addr:" & to_hstring(wb_in.adr) & - " we:" & std_ulogic'image(wb_in.we) & - " sel:" & to_hstring(wb_in.sel); + if TRACE then + if wb_in.cyc = '1' and wb_in.stb = '1' then + report "latch new wb req ! addr:" & to_hstring(wb_in.adr) & + " we:" & std_ulogic'image(wb_in.we) & + " sel:" & to_hstring(wb_in.sel); + end if; end if; end if; end if; end if; end process; + -- Stall when stash is full + wb_out.stall <= wb_stash.cyc; + -- -- -- Read response pipeline @@ -669,14 +696,14 @@ begin when IDLE => case req_op is when OP_LOAD_MISS => - wb_out.stall <= '1'; + stall <= '1'; when OP_STORE_MISS | OP_STORE_HIT => - wb_out.stall <= not accept_store; + stall <= not accept_store; when others => - wb_out.stall <= '0'; + stall <= '0'; end case; when others => - wb_out.stall <= '1'; + stall <= '1'; end case; -- Data out mux -- 2.30.2