From b6de8f6a08cdd38b4ba5170b3e0d9b4075903fe1 Mon Sep 17 00:00:00 2001 From: Ian Lance Taylor Date: Fri, 8 Sep 1995 18:07:02 +0000 Subject: [PATCH] * configure.in: Convert to use autoconf. * configure: New file, built by autoconf. * acconfig.h: New file. * config.in: New file, built by autoheader. * Makefile.in: Various changes for new configure script. Also: (INSTALL): Go up two levels, not one. (ALLOCA, MALLOC, OPCODES): Remove. (gencode): Use $(CC_FOR_BUILD). (case.o): Remove. (run.o, interp.o): Depend upon config.h. * interp.c: Include "config.h". Don't include "sysdep.h". Include , , and if they exist. * run.c: Include "config.h". Don't include "sysdep.h". Include if it exists. Include "getopt.h". Declare printf if necessary. --- sim/w65/.Sanitize | 2 + sim/w65/ChangeLog | 18 + sim/w65/Makefile.in | 72 ++- sim/w65/acconfig.h | 2 + sim/w65/config.in | 13 + sim/w65/configure | 1073 ++++++++++++++++++++++++++++++++++++++++++ sim/w65/configure.in | 56 ++- sim/w65/interp.c | 14 +- sim/w65/run.c | 11 +- 9 files changed, 1194 insertions(+), 67 deletions(-) create mode 100644 sim/w65/acconfig.h create mode 100644 sim/w65/config.in create mode 100755 sim/w65/configure diff --git a/sim/w65/.Sanitize b/sim/w65/.Sanitize index a9a02db4df0..166c819dde9 100755 --- a/sim/w65/.Sanitize +++ b/sim/w65/.Sanitize @@ -27,6 +27,8 @@ Things-to-keep: ChangeLog Makefile.in +acconfig.h +config.in configure.in interp.c gencode.c diff --git a/sim/w65/ChangeLog b/sim/w65/ChangeLog index d8d3a6b058d..03707a0e731 100644 --- a/sim/w65/ChangeLog +++ b/sim/w65/ChangeLog @@ -1,3 +1,21 @@ +Fri Sep 8 14:03:32 1995 Ian Lance Taylor + + * configure.in: Convert to use autoconf. + * configure: New file, built by autoconf. + * acconfig.h: New file. + * config.in: New file, built by autoheader. + * Makefile.in: Various changes for new configure script. Also: + (INSTALL): Go up two levels, not one. + (ALLOCA, MALLOC, OPCODES): Remove. + (gencode): Use $(CC_FOR_BUILD). + (case.o): Remove. + (run.o, interp.o): Depend upon config.h. + * interp.c: Include "config.h". Don't include "sysdep.h". + Include , , and if they exist. + * run.c: Include "config.h". Don't include "sysdep.h". Include + if it exists. Include "getopt.h". Declare printf if + necessary. + Thu Aug 3 10:45:37 1995 Fred Fish * Update all FSF addresses except those in COPYING* files. diff --git a/sim/w65/Makefile.in b/sim/w65/Makefile.in index bdd6ef840b4..49a51268502 100755 --- a/sim/w65/Makefile.in +++ b/sim/w65/Makefile.in @@ -17,12 +17,15 @@ # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -srcdir = . +VPATH = @srcdir@ +srcdir = @srcdir@ -prefix = /usr/local +prefix = @prefix@ +exec_prefix = @exec_prefix@ -program_transform_name = -exec_prefix = $(prefix) +host_alias = @host_alias@ +target_alias = @target_alias@ +program_transform_name = @program_transform_name@ bindir = $(exec_prefix)/bin libdir = $(exec_prefix)/lib tooldir = $(exec_prefix)/$(target_alias) @@ -44,25 +47,26 @@ docdir = $(datadir)/doc SHELL = /bin/sh -INSTALL = `cd $(srcdir)/..;pwd`/install.sh -c +INSTALL = `cd $(srcdir)/../..;pwd`/install.sh -c INSTALL_PROGRAM = $(INSTALL) INSTALL_DATA = $(INSTALL) INSTALL_XFORM = $(INSTALL) -t='$(program_transform_name)' INSTALL_XFORM1 = $(INSTALL_XFORM) -b=.1 -AR = ar +AR = @AR@ AR_FLAGS = qv -CFLAGS = -g +CC = @CC@ +CFLAGS = @CFLAGS@ MAKEINFO = makeinfo TEXI2DVI = texi2dvi -RANLIB = ranlib +RANLIB = @RANLIB@ BISONFLAGS = -d TEXI2ROFF=texi2roff MAKEOVERRIDES= -CC_FOR_BUILD = $(CC) -NM_FOR_TARGET = nm -NM = $(NM_FOR_TARGET) -SYMLINK = ln -s +CC_FOR_BUILD = @CC_FOR_BUILD@ + +HDEFINES = @HDEFINES@ +TDEFINES = # Comment these out if using lex. # Distribution version @@ -72,9 +76,6 @@ SYMLINK = ln -s # Where to find texinfo.tex to format docn with TeX TEXIDIR = $(srcdir)/../texinfo -#CC=gcc -Wall -CC=cc - # These should all be the same program too. RUN_PROG=run SIM_LIB=libsim.a @@ -99,28 +100,9 @@ ALL_CFLAGS = $(INCLUDES) $(HDEFINES) $(TDEFINES) $(CFLAGS) .c.o: $(CC) -c $(ALL_CFLAGS) $< -# -## Random definitions -# Hopefully all these may be flushed once we get configuration down pat. - -# alloca only needed for systems which don't have it and when cc != gcc. -# ALLOCA = alloca.o - -# nm tries to malloc enough space for the string table. The old GNU malloc -# rounds this up to a power of two (e.g. 5M becomes 8M), and so it might -# fail unnecessarily. I've also seen some Unix malloc's fail, even when -# there is enough memory. So use the new GNU malloc. -# MALLOC = gmalloc.o -# Use this if the system malloc is good enough. -MALLOC = - -# Use the GNU getopt unless you have problems with it. -# The IRIS version could probably benefit from being assembled with -# libmalloc rather than the ordinary malloc. LIBIBERTY = ../../libiberty/libiberty.a BFD = ../../bfd/libbfd.a -OPCODES = ../../opcodes/libopcodes.a RUNTEST = runtest RUNTESTFLAGS = @@ -155,17 +137,16 @@ optable:gencode ./gencode -a >$(srcdir)/../../opcodes/w65-opc.h gencode:gencode.c - $(CC) -o gencode $< + $(CC_FOR_BUILD) -o gencode $< -case.o:case.c -run.o:run.c -interp.o:interp.c +run.o:run.c config.h +interp.o:interp.c config.h ###################################################################### mostlyclean: - -rm -f *.o *~ \#* core binutils.?? binutils.??? case.c + -rm -f *.o *~ \#* core binutils.?? binutils.??? case.c config.log clean: mostlyclean -rm -f $(PROGS) *.o *.a @@ -173,7 +154,7 @@ clean: mostlyclean distclean: -rm -f Makefile config.status sysdep.h *.o *~ \#* core y.* \ binutils.?? binutils.??s binutils.aux binutils.log binutils.toc gencode run - -rm -f $(PROGS) underscore.c + -rm -f $(PROGS) config.h stamp-h realclean: clean distclean -rm -f $(DISTSTUFF) TAGS @@ -242,8 +223,15 @@ make: echo >>Makefile ; \ sed "s/^#__$(HOST)__#//" < Makefile.old >>Makefile -Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) - $(SHELL) ./config.status +Makefile: Makefile.in config.status + CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status + +config.h: stamp-h ; @true +stamp-h: config.in config.status + CONFIG_FILES= CONFIG_HEADERS=config.h:config.in $(SHELL) ./config.status + +config.status: configure + $(SHELL) ./config.status --recheck ### Local Variables: *** ### mode:fundamental *** diff --git a/sim/w65/acconfig.h b/sim/w65/acconfig.h new file mode 100644 index 00000000000..79ecfe1efc1 --- /dev/null +++ b/sim/w65/acconfig.h @@ -0,0 +1,2 @@ +/* Whether printf must be declared even if is included. */ +#undef NEED_DECLARATION_PRINTF diff --git a/sim/w65/config.in b/sim/w65/config.in new file mode 100644 index 00000000000..f5a2e14c38c --- /dev/null +++ b/sim/w65/config.in @@ -0,0 +1,13 @@ +/* config.in. Generated automatically from configure.in by autoheader. */ + +/* Whether printf must be declared even if is included. */ +#undef NEED_DECLARATION_PRINTF + +/* Define if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define if you have the header file. */ +#undef HAVE_TIME_H + +/* Define if you have the header file. */ +#undef HAVE_UNISTD_H diff --git a/sim/w65/configure b/sim/w65/configure new file mode 100755 index 00000000000..f5a3e31fd0e --- /dev/null +++ b/sim/w65/configure @@ -0,0 +1,1073 @@ +#! /bin/sh + +# Guess values for system-dependent variables and create Makefiles. +# Generated automatically using autoconf version 2.4 +# Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc. +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. + +# Defaults: +ac_help= +ac_default_prefix=/usr/local +# Any additions from configure.in: + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +cache_file=./config.cache +exec_prefix=NONE +host=NONE +no_create= +nonopt=NONE +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +target=NONE +verbose= +x_includes=NONE +x_libraries=NONE + +# Initialize some other variables. +subdirs= + +ac_prev= +for ac_option +do + + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case "$ac_option" in + + -build | --build | --buil | --bui | --bu | --b) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=* | --b=*) + build="$ac_optarg" ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he) + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat << EOF +Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +Configuration: + --cache-file=FILE cache test results in FILE + --help print this message + --no-create do not create output files + --quiet, --silent do not print \`checking...' messages + --version print the version of autoconf that created configure +Directory and file names: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=PREFIX install architecture-dependent files in PREFIX + [same as prefix] + --srcdir=DIR find the sources in DIR [configure dir or ..] + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names +Host type: + --build=BUILD configure for building on BUILD [BUILD=HOST] + --host=HOST configure for HOST [guessed] + --target=TARGET configure for TARGET [TARGET=HOST] +Features and packages: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +--enable and --with options recognized:$ac_help +EOF + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site="$ac_optarg" ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 2.4" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" 1>&2 + fi + if test "x$nonopt" != xNONE; then + { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } + fi + nonopt="$ac_option" + ;; + + esac +done + +if test -n "$ac_prev"; then + { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +fi + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 6 checking for... messages and results +# 5 compiler messages saved in config.log +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>./config.log + +echo "\ +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +" 1>&5 + +# Strip out --no-create and --no-recursion so they do not pile up. +# Also quote any args containing shell metacharacters. +ac_configure_args= +for ac_arg +do + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args $ac_arg" ;; + esac +done + +# NLS nuisances. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LANG+set}" = set; then LANG=C; export LANG; fi + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo > confdefs.h + +# A filename unique to this package, relative to the directory that +# configure is in, which we can look for to find out if srcdir is correct. +ac_unique_file=Makefile.in + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + else + { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + fi +fi +srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + echo "loading site script $ac_site_file" + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5 2>&5' +ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5 2>&5' + +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + + + + + +ac_aux_dir= +for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../.." 1>&2; exit 1; } +fi +ac_config_guess=$ac_aux_dir/config.guess +ac_config_sub=$ac_aux_dir/config.sub +ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. + + +# Do some error checking and defaulting for the host and target type. +# The inputs are: +# configure --host=HOST --target=TARGET --build=BUILD NONOPT +# +# The rules are: +# 1. You are not allowed to specify --host, --target, and nonopt at the +# same time. +# 2. Host defaults to nonopt. +# 3. If nonopt is not specified, then host defaults to the current host, +# as determined by config.guess. +# 4. Target and build default to nonopt. +# 5. If nonopt is not specified, then target and build default to host. + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +case $host---$target---$nonopt in +NONE---*---* | *---NONE---* | *---*---NONE) ;; +*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; +esac + + +# Make sure we can run config.sub. +if $ac_config_sub sun4 >/dev/null 2>&1; then : +else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } +fi + +echo $ac_n "checking host system type""... $ac_c" 1>&6 + +host_alias=$host +case "$host_alias" in +NONE) + case $nonopt in + NONE) + if host_alias=`$ac_config_guess`; then : + else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } + fi ;; + *) host_alias=$nonopt ;; + esac ;; +esac + +host=`$ac_config_sub $host_alias` +host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` +echo "$ac_t""$host" 1>&6 + +echo $ac_n "checking target system type""... $ac_c" 1>&6 + +target_alias=$target +case "$target_alias" in +NONE) + case $nonopt in + NONE) target_alias=$host_alias ;; + *) target_alias=$nonopt ;; + esac ;; +esac + +target=`$ac_config_sub $target_alias` +target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` +echo "$ac_t""$target" 1>&6 + +echo $ac_n "checking build system type""... $ac_c" 1>&6 + +build_alias=$build +case "$build_alias" in +NONE) + case $nonopt in + NONE) build_alias=$host_alias ;; + *) build_alias=$nonopt ;; + esac ;; +esac + +build=`$ac_config_sub $build_alias` +build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` +echo "$ac_t""$build" 1>&6 + +test "$host_alias" != "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- + +if test "$program_transform_name" = s,x,x,; then + program_transform_name= +else + # Double any \ or $. + echo 's,\\,\\\\,g; s,\$,$$,g' > conftestsed + program_transform_name="`echo $program_transform_name|sed -f conftestsed`" + rm -f conftestsed +fi +test "$program_prefix" != NONE && + program_transform_name="s,^,${program_prefix},; $program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" + +# sed with no file args requires a program. +test "$program_transform_name" = "" && program_transform_name="s,x,x," + + +. ${srcdir}/../../bfd/configure.host + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_CC" && ac_cv_prog_CC="cc" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <&5 | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 +if test $ac_cv_prog_gcc = yes; then + GCC=yes + if test "${CFLAGS+set}" != set; then + echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_gcc_g=yes +else + ac_cv_prog_gcc_g=no +fi +rm -f conftest* + +fi + echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6 + if test $ac_cv_prog_gcc_g = yes; then + CFLAGS="-g -O" + else + CFLAGS="-O" + fi + fi +else + GCC= + test "${CFLAGS+set}" = set || CFLAGS="-g" +fi + + + +AR=${AR-ar} + +# Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="ranlib" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + +# Put a plausible default for CC_FOR_BUILD in Makefile. +# If we cannot run a trivial program, we must be cross compiling. +echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_c_cross=yes +else +cat > conftest.$ac_ext </dev/null; then + ac_cv_c_cross=no +else + ac_cv_c_cross=yes +fi +fi +rm -fr conftest* +fi +cross_compiling=$ac_cv_c_cross +echo "$ac_t""$ac_cv_c_cross" 1>&6 + +if test "x$cross_compiling" = "xno"; then + CC_FOR_BUILD='$(CC)' +else + CC_FOR_BUILD=gcc +fi + + +echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then +if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # This must be in double quotes, not single quotes, because CPP may get + # substituted into the Makefile and "${CC-cc}" will confuse make. + CPP="${CC-cc} -E" + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. + cat > conftest.$ac_ext < +Syntax Error +EOF +eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + rm -rf conftest* + CPP="${CC-cc} -E -traditional-cpp" + cat > conftest.$ac_ext < +Syntax Error +EOF +eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + rm -rf conftest* + CPP=/lib/cpp +fi +rm -f conftest* +fi +rm -f conftest* + ac_cv_prog_CPP="$CPP" +fi + CPP="$ac_cv_prog_CPP" +else + ac_cv_prog_CPP="$CPP" +fi +echo "$ac_t""$CPP" 1>&6 + +for ac_hdr in stdlib.h time.h unistd.h +do +ac_safe=`echo "$ac_hdr" | tr './\055' '___'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | tr '[a-z]./\055' '[A-Z]___'` + cat >> confdefs.h <&6 +fi +done + + +echo $ac_n "checking whether printf must be declared""... $ac_c" 1>&6 +if eval "test \"`echo '$''{'sim_cv_decl_needed_printf'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +int main() { return 0; } +int t() { +int (*pfn) = (int (*)) printf +; return 0; } +EOF +if eval $ac_compile; then + rm -rf conftest* + sim_cv_decl_needed_printf=no +else + rm -rf conftest* + sim_cv_decl_needed_printf=yes +fi +rm -f conftest* + +fi + +echo "$ac_t""$sim_cv_decl_needed_printf" 1>&6 +if test $sim_cv_decl_needed_printf = yes; then + cat >> confdefs.h <<\EOF +#define NEED_DECLARATION_PRINTF 1 +EOF + +fi + +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \ + >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + +trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 + +DEFS=-DHAVE_CONFIG_H + +# Without the "./", some shells look in PATH for config.status. +: ${CONFIG_STATUS=./config.status} + +echo creating $CONFIG_STATUS +rm -f $CONFIG_STATUS +cat > $CONFIG_STATUS </dev/null | sed 1q`: +# +# $0 $ac_configure_args +# +# Compiler output produced by configure, useful for debugging +# configure, is in ./config.log if it exists. + +ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +for ac_option +do + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" + exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "$CONFIG_STATUS generated by autoconf version 2.4" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; + esac +done + +ac_given_srcdir=$srcdir + +trap 'rm -fr `echo "Makefile config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 + +# Protect against being on the right side of a sed subst in config.status. +sed 's/%@/@@/; s/@%/@@/; s/%g$/@g/; /@g$/s/[\\\\&%]/\\\\&/g; + s/@@/%@/; s/@@/@%/; s/@g$/%g/' > conftest.subs <<\CEOF +$ac_vpsub +$extrasub +s%@CFLAGS@%$CFLAGS%g +s%@CPPFLAGS@%$CPPFLAGS%g +s%@CXXFLAGS@%$CXXFLAGS%g +s%@DEFS@%$DEFS%g +s%@LDFLAGS@%$LDFLAGS%g +s%@LIBS@%$LIBS%g +s%@exec_prefix@%$exec_prefix%g +s%@prefix@%$prefix%g +s%@program_transform_name@%$program_transform_name%g +s%@host@%$host%g +s%@host_alias@%$host_alias%g +s%@host_cpu@%$host_cpu%g +s%@host_vendor@%$host_vendor%g +s%@host_os@%$host_os%g +s%@target@%$target%g +s%@target_alias@%$target_alias%g +s%@target_cpu@%$target_cpu%g +s%@target_vendor@%$target_vendor%g +s%@target_os@%$target_os%g +s%@build@%$build%g +s%@build_alias@%$build_alias%g +s%@build_cpu@%$build_cpu%g +s%@build_vendor@%$build_vendor%g +s%@build_os@%$build_os%g +s%@CC@%$CC%g +s%@HDEFINES@%$HDEFINES%g +s%@AR@%$AR%g +s%@RANLIB@%$RANLIB%g +s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g +s%@CPP@%$CPP%g + +CEOF +EOF +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then + # Support "outfile[:infile]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + # Adjust relative srcdir, etc. for subdirectories. + + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dir_suffix= ac_dots= + fi + + case "$ac_given_srcdir" in + .) srcdir=. + if test -z "$ac_dots"; then top_srcdir=. + else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + echo creating "$ac_file" + rm -f "$ac_file" + configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." + case "$ac_file" in + *Makefile*) ac_comsub="1i\\ +# $configure_input" ;; + *) ac_comsub= ;; + esac + sed -e "$ac_comsub +s%@configure_input@%$configure_input%g +s%@srcdir@%$srcdir%g +s%@top_srcdir@%$top_srcdir%g +" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file +fi; done +rm -f conftest.subs + +# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +# NAME is the cpp macro being defined and VALUE is the value it is being given. +# +# ac_d sets the value in "#define NAME VALUE" lines. +ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' +ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' +ac_dC='\3' +ac_dD='%g' +# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". +ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_uB='\([ ]\)%\1#\2define\3' +ac_uC=' ' +ac_uD='\4%g' +# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_eB='$%\1#\2define\3' +ac_eC=' ' +ac_eD='%g' + +CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"} +for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then + # Support "outfile[:infile]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + echo creating $ac_file + + rm -f conftest.frag conftest.in conftest.out + cp $ac_given_srcdir/$ac_file_in conftest.in + +EOF + +# Transform confdefs.h into a sed script conftest.vals that substitutes +# the proper values into config.h.in to produce config.h. And first: +# Protect against being on the right side of a sed subst in config.status. +# Protect against being in an unquoted here document in config.status. +rm -f conftest.vals +cat > conftest.hdr <<\EOF +s/[\\&%]/\\&/g +s%[\\$`]%\\&%g +s%#define \([A-Za-z_][A-Za-z0-9_]*\) \(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp +s%ac_d%ac_u%gp +s%ac_u%ac_e%gp +EOF +sed -n -f conftest.hdr confdefs.h > conftest.vals +rm -f conftest.hdr + +# This sed command replaces #undef with comments. This is necessary, for +# example, in the case of _POSIX_SOURCE, which is predefined and required +# on some systems where configure will not decide to define it. +cat >> conftest.vals <<\EOF +s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% +EOF + +# Break up conftest.vals because some shells have a limit on +# the size of here documents, and old seds have small limits too. +# Maximum number of lines to put in a single here document. +ac_max_here_lines=12 + +rm -f conftest.tail +while : +do + ac_lines=`grep -c . conftest.vals` + # grep -c gives empty output for an empty file on some AIX systems. + if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi + # Write a limited-size here document to conftest.frag. + echo ' cat > conftest.frag <> $CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS + echo 'CEOF + sed -f conftest.frag conftest.in > conftest.out + rm -f conftest.in + mv conftest.out conftest.in +' >> $CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail + rm -f conftest.vals + mv conftest.tail conftest.vals +done +rm -f conftest.vals + +cat >> $CONFIG_STATUS <<\EOF + rm -f conftest.frag conftest.h + echo "/* $ac_file. Generated automatically by configure. */" > conftest.h + cat conftest.in >> conftest.h + rm -f conftest.in + if cmp -s $ac_file conftest.h 2>/dev/null; then + echo "$ac_file is unchanged" + rm -f conftest.h + else + rm -f $ac_file + mv conftest.h $ac_file + fi +fi; done + + +case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac +exit 0 +EOF +chmod +x $CONFIG_STATUS +rm -fr confdefs* $ac_clean_files +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 + diff --git a/sim/w65/configure.in b/sim/w65/configure.in index 6fcf14e4fa1..5965cd3ef26 100755 --- a/sim/w65/configure.in +++ b/sim/w65/configure.in @@ -1,30 +1,42 @@ -# This file is a shell script that supplies the information necessary -# to tailor a template configure script into the configure script -# appropriate for this directory. For more information, check any -# existing configure script. +dnl Process this file with autoconf to produce a configure script. +AC_PREREQ(2.3)dnl +AC_INIT(Makefile.in) -srctrigger=gencode.c -srcname="w65sim" +AC_CONFIG_HEADER(config.h:config.in) -# per-host: +AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../..) +AC_CANONICAL_SYSTEM +AC_ARG_PROGRAM . ${srcdir}/../../bfd/configure.host -# Set up to make a link between the host's include file and "sysdep.h". -files="../../bfd/hosts/${my_host}.h" - -links="sysdep.h" - -if [ ! -f ${srcdir}/${files} ] ; then - files=../../bfd/hosts/std-host.h - echo "[${srcname} has no specific support for host ${host} -- using std-host]" +AC_PROG_CC +AC_SUBST(CFLAGS) +AC_SUBST(HDEFINES) +AR=${AR-ar} +AC_SUBST(AR) +AC_PROG_RANLIB + +# Put a plausible default for CC_FOR_BUILD in Makefile. +AC_C_CROSS +if test "x$cross_compiling" = "xno"; then + CC_FOR_BUILD='$(CC)' +else + CC_FOR_BUILD=gcc fi - -host_makefile_frag= -if [ -f ${srcdir}/../../bfd/config/${my_host}.mh ] ; then - host_makefile_frag=../../bfd/config/${my_host}.mh +AC_SUBST(CC_FOR_BUILD) + +AC_CHECK_HEADERS(stdlib.h time.h unistd.h) + +AC_MSG_CHECKING([whether printf must be declared]) +AC_CACHE_VAL(sim_cv_decl_needed_printf, +[AC_TRY_COMPILE([#include ], +[int (*pfn) = (int (*)) printf], +sim_cv_decl_needed_printf=no, sim_cv_decl_needed_printf=yes)]) +AC_MSG_RESULT($sim_cv_decl_needed_printf) +if test $sim_cv_decl_needed_printf = yes; then + AC_DEFINE(NEED_DECLARATION_PRINTF) fi -# per-target: - - +AC_OUTPUT(Makefile, +[case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac]) diff --git a/sim/w65/interp.c b/sim/w65/interp.c index 0a05fbc4a2a..7b2bf8ad892 100644 --- a/sim/w65/interp.c +++ b/sim/w65/interp.c @@ -18,9 +18,19 @@ */ +#include "config.h" + +#include #include -#include "sysdep.h" -#include +#ifdef HAVE_STDLIB_H +#include +#endif +#ifdef HAVE_TIME_H +#include +#endif +#ifdef HAVE_UNISTD_H +#include +#endif #include #include "bfd.h" #include "remote-sim.h" diff --git a/sim/w65/run.c b/sim/w65/run.c index a636e3fc43e..eb76590e979 100644 --- a/sim/w65/run.c +++ b/sim/w65/run.c @@ -21,9 +21,18 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Steve Chamberlain sac@cygnus.com */ +#include "config.h" + #include +#ifdef HAVE_STDLIB_H +#include +#endif +#include "getopt.h" #include "bfd.h" -#include "sysdep.h" + +#ifdef NEED_DECLARATION_PRINTF +extern int printf (); +#endif void usage(); extern int optind; -- 2.30.2