From b7ea362b023feba8d75d5831948bc0d8496b4069 Mon Sep 17 00:00:00 2001 From: Pedro Alves Date: Wed, 8 Jan 2014 18:55:51 +0000 Subject: [PATCH] [remote/gdbserver] Don't lose signals when reconnecting. Currently, when GDB connects in all-stop mode, GDBserver always responds to the status packet with a GDB_SIGNAL_TRAP, even if the program is actually stopped for some other signal. (gdb) tar rem ... ... (gdb) c Program received signal SIGUSR1, User defined signal 1. (gdb) disconnect (gdb) tar rem ... (gdb) c (Or a GDB crash instead of an explicit disconnect.) This results in the program losing that signal on that last continue, because gdb will tell the target to resume with no signal (to suppress the GDB_SIGNAL_TRAP, due to 'handle SISGTRAP nopass'), and that will actually suppress the real signal the program had stopped for (SIGUSR1). To fix that, I think we should make GDBserver report the real signal the thread had stopped for in response to the status packet: @item ? @cindex @samp{?} packet Indicate the reason the target halted. The reply is the same as for step and continue. But, that raises the question -- which thread are we reporting the status for? Due to how the RSP in all-stop works, we can only report one status. The status packet's response is a stop reply packet, so it includes the thread identifier, so it's not a problem packet-wise. However, GDBserver is currently always reporting the status for first thread in the thread list, even though that may well not be the thread that got the signal that caused the program to stop. So the next logical step would be to report the status for the last_ptid/last_status thread (the last event reported to gdb), if it's still around; and if not, fallback to some other thread. There's an issue on the GDB side with that, though... GDB currently always adds the thread reported in response to the status query as the first thread in its list. That means that if we start with e.g., (gdb) info threads 3 Thread 1003 ... * 2 Thread 1002 ... 1 Thread 1001 ... And reconnect: (gdb) disconnect (gdb) tar rem ... We end up with: (gdb) info threads 3 Thread 1003 ... 2 Thread 1001 ... * 1 Thread 1002 ... Not a real big issue, but it's reasonably fixable, by having GDB fetch/sync the thread list before fetching the status/'?', and then using the status to select the right thread as current on the GDB side. Holes in the thread numbers are squashed before/after reconnection (e.g., 2,3,5 becomes 1,2,3), but the order is preserved, which I think is both good, and good enough. However (yes, there's more...), the previous GDB that was connected might have had gdbserver running in non-stop mode, or could have left gdbserver doing disconnected tracing (which also forces non-stop), and if the new gdb/connection is in all-stop mode, we can end up with more than one thread with a signal to report back to gdb. As we can only report one thread/status (in the all-stop RSP variant; the non-stop variant doesn't have this issue), we get to do what we do at every other place we have this situation -- leave events we can't report right now as pending, so that the next resume picks them up. Note all this ammounts to a QoI change, within the existing framework. There's really no RSP change here. The only user visible change (other than that the signal is program is stopped at isn't lost / is passed to the program), is in "info program", that now can show the signal the program stopped for. Of course, the next resume will respect the pass/nopass setting for the signal in question. It'd be reasonable to have the initial connection tell the user the program was stopped with a signal, similar to when we load a core to debug, but I'm leaving that out for a future change. I think we'll need to either change how handle_inferior_event & co handle stop_soon, or maybe bypass them completely (like fork-child.c:startup_inferior) for that. Tested on x86_64 Fedora 17. gdb/gdbserver/ 2014-01-08 Pedro Alves * gdbthread.h (struct thread_info) : New field. * server.c (visit_actioned_threads, handle_pending_status): New function. (handle_v_cont): Factor out parts to ... (resume): ... this new function. If in all-stop, and a thread being resumed has a pending status, report it without actually resuming. (myresume): Adjust to use the new 'resume' function. (clear_pending_status_callback, set_pending_status_callback) (find_status_pending_thread_callback): New functions. (handle_status): Handle the case of multiple threads having interesting statuses to report. Report threads' real last signal instead of always reporting GDB_SIGNAL_TRAP. Look for a thread with an interesting thread to report the status for, instead of always reporting the status of the first thread. gdb/ 2014-01-08 Pedro Alves * remote.c (remote_add_thread): Add threads silently if starting up. (remote_notice_new_inferior): If in all-stop, and starting up, don't call notice_new_inferior. (get_current_thread): New function, factored out from ... (add_current_inferior_and_thread): ... this. Adjust. (remote_start_remote) : Fetch the thread list. If we found any thread, then select the remote's current thread as GDB's current thread too. gdb/testsuite/ 2014-01-08 Pedro Alves * gdb.threads/reconnect-signal.c: New file. * gdb.threads/reconnect-signal.exp: New file. --- gdb/ChangeLog | 12 + gdb/gdbserver/ChangeLog | 18 ++ gdb/gdbserver/gdbthread.h | 3 + gdb/gdbserver/server.c | 212 ++++++++++++++---- gdb/remote.c | 86 +++++-- gdb/testsuite/ChangeLog | 5 + gdb/testsuite/gdb.threads/reconnect-signal.c | 67 ++++++ .../gdb.threads/reconnect-signal.exp | 84 +++++++ 8 files changed, 429 insertions(+), 58 deletions(-) create mode 100644 gdb/testsuite/gdb.threads/reconnect-signal.c create mode 100644 gdb/testsuite/gdb.threads/reconnect-signal.exp diff --git a/gdb/ChangeLog b/gdb/ChangeLog index bbcbabc2a1a..315da655983 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,15 @@ +2014-01-08 Pedro Alves + + * remote.c (remote_add_thread): Add threads silently if starting + up. + (remote_notice_new_inferior): If in all-stop, and starting up, + don't call notice_new_inferior. + (get_current_thread): New function, factored out from ... + (add_current_inferior_and_thread): ... this. Adjust. + (remote_start_remote) : Fetch the thread list. If we + found any thread, then select the remote's current thread as GDB's + current thread too. + 2014-01-08 Joel Brobecker * NEWS: Create a new section for the next release branch. diff --git a/gdb/gdbserver/ChangeLog b/gdb/gdbserver/ChangeLog index 81042f2e99a..bf874a15ea4 100644 --- a/gdb/gdbserver/ChangeLog +++ b/gdb/gdbserver/ChangeLog @@ -1,3 +1,21 @@ +2014-01-08 Pedro Alves + + * gdbthread.h (struct thread_info) : New field. + * server.c (visit_actioned_threads, handle_pending_status): New + function. + (handle_v_cont): Factor out parts to ... + (resume): ... this new function. If in all-stop, and a thread + being resumed has a pending status, report it without actually + resuming. + (myresume): Adjust to use the new 'resume' function. + (clear_pending_status_callback, set_pending_status_callback) + (find_status_pending_thread_callback): New functions. + (handle_status): Handle the case of multiple threads having + interesting statuses to report. Report threads' real last signal + instead of always reporting GDB_SIGNAL_TRAP. Look for a thread + with an interesting thread to report the status for, instead of + always reporting the status of the first thread. + 2014-01-01 Joel Brobecker * gdbserver.c (gdbserver_version): Set copyright year to 2014. diff --git a/gdb/gdbserver/gdbthread.h b/gdb/gdbserver/gdbthread.h index 507d9fecba9..a19056670c0 100644 --- a/gdb/gdbserver/gdbthread.h +++ b/gdb/gdbserver/gdbthread.h @@ -36,6 +36,9 @@ struct thread_info /* The last wait status reported for this thread. */ struct target_waitstatus last_status; + /* True if LAST_STATUS hasn't been reported to GDB yet. */ + int status_pending_p; + /* Given `while-stepping', a thread may be collecting data for more than one tracepoint simultaneously. E.g.: diff --git a/gdb/gdbserver/server.c b/gdb/gdbserver/server.c index 6edce81e259..5e8007511d2 100644 --- a/gdb/gdbserver/server.c +++ b/gdb/gdbserver/server.c @@ -2016,6 +2016,63 @@ handle_query (char *own_buf, int packet_len, int *new_packet_len_p) } static void gdb_wants_all_threads_stopped (void); +static void resume (struct thread_resume *actions, size_t n); + +/* Call CALLBACK for any thread to which ACTIONS applies to. Returns + true if CALLBACK returns true. Returns false if no matching thread + is found or CALLBACK results false. */ + +static int +visit_actioned_threads (const struct thread_resume *actions, + size_t num_actions, + int (*callback) (const struct thread_resume *, + struct thread_info *)) +{ + struct inferior_list_entry *entry; + + for (entry = all_threads.head; entry != NULL; entry = entry->next) + { + size_t i; + + for (i = 0; i < num_actions; i++) + { + const struct thread_resume *action = &actions[i]; + + if (ptid_equal (action->thread, minus_one_ptid) + || ptid_equal (action->thread, entry->id) + || ((ptid_get_pid (action->thread) + == ptid_get_pid (entry->id)) + && ptid_get_lwp (action->thread) == -1)) + { + struct thread_info *thread = (struct thread_info *) entry; + + if ((*callback) (action, thread)) + return 1; + } + } + } + + return 0; +} + +/* Callback for visit_actioned_threads. If the thread has a pending + status to report, report it now. */ + +static int +handle_pending_status (const struct thread_resume *resumption, + struct thread_info *thread) +{ + if (thread->status_pending_p) + { + thread->status_pending_p = 0; + + last_status = thread->last_status; + last_ptid = thread->entry.id; + prepare_resume_reply (own_buf, last_ptid, &last_status); + return 1; + } + return 0; +} /* Parse vCont packets. */ void @@ -2128,12 +2185,34 @@ handle_v_cont (char *own_buf) cont_thread = minus_one_ptid; set_desired_inferior (0); + resume (resume_info, n); + free (resume_info); + return; + +err: + write_enn (own_buf); + free (resume_info); + return; +} + +/* Resume target with ACTIONS, an array of NUM_ACTIONS elements. */ + +static void +resume (struct thread_resume *actions, size_t num_actions) +{ if (!non_stop) - enable_async_io (); + { + /* Check if among the threads that GDB wants actioned, there's + one with a pending status to report. If so, skip actually + resuming/stopping and report the pending event + immediately. */ + if (visit_actioned_threads (actions, num_actions, handle_pending_status)) + return; - (*the_target->resume) (resume_info, n); + enable_async_io (); + } - free (resume_info); + (*the_target->resume) (actions, num_actions); if (non_stop) write_ok (own_buf); @@ -2157,12 +2236,6 @@ handle_v_cont (char *own_buf) || last_status.kind == TARGET_WAITKIND_SIGNALLED) mourn_inferior (find_process_pid (ptid_get_pid (last_ptid))); } - return; - -err: - write_enn (own_buf); - free (resume_info); - return; } /* Attach to a new program. Return 1 if successful, 0 if failure. */ @@ -2422,31 +2495,7 @@ myresume (char *own_buf, int step, int sig) n++; } - if (!non_stop) - enable_async_io (); - - (*the_target->resume) (resume_info, n); - - if (non_stop) - write_ok (own_buf); - else - { - last_ptid = mywait (minus_one_ptid, &last_status, 0, 1); - - if (last_status.kind != TARGET_WAITKIND_EXITED - && last_status.kind != TARGET_WAITKIND_SIGNALLED) - { - current_inferior->last_resume_kind = resume_stop; - current_inferior->last_status = last_status; - } - - prepare_resume_reply (own_buf, last_ptid, &last_status); - disable_async_io (); - - if (last_status.kind == TARGET_WAITKIND_EXITED - || last_status.kind == TARGET_WAITKIND_SIGNALLED) - mourn_inferior (find_process_pid (ptid_get_pid (last_ptid))); - } + resume (resume_info, n); } /* Callback for for_each_inferior. Make a new stop reply for each @@ -2536,6 +2585,48 @@ gdb_reattached_process (struct inferior_list_entry *entry) process->gdb_detached = 0; } +/* Callback for for_each_inferior. Clear the thread's pending status + flag. */ + +static void +clear_pending_status_callback (struct inferior_list_entry *entry) +{ + struct thread_info *thread = (struct thread_info *) entry; + + thread->status_pending_p = 0; +} + +/* Callback for for_each_inferior. If the thread is stopped with an + interesting event, mark it as having a pending event. */ + +static void +set_pending_status_callback (struct inferior_list_entry *entry) +{ + struct thread_info *thread = (struct thread_info *) entry; + + if (thread->last_status.kind != TARGET_WAITKIND_STOPPED + || (thread->last_status.value.sig != GDB_SIGNAL_0 + /* A breakpoint, watchpoint or finished step from a previous + GDB run isn't considered interesting for a new GDB run. + If we left those pending, the new GDB could consider them + random SIGTRAPs. This leaves out real async traps. We'd + have to peek into the (target-specific) siginfo to + distinguish those. */ + && thread->last_status.value.sig != GDB_SIGNAL_TRAP)) + thread->status_pending_p = 1; +} + +/* Callback for find_inferior. Return true if ENTRY (a thread) has a + pending status to report to GDB. */ + +static int +find_status_pending_thread_callback (struct inferior_list_entry *entry, void *data) +{ + struct thread_info *thread = (struct thread_info *) entry; + + return thread->status_pending_p; +} + /* Status handler for the '?' packet. */ static void @@ -2544,13 +2635,15 @@ handle_status (char *own_buf) /* GDB is connected, don't forward events to the target anymore. */ for_each_inferior (&all_processes, gdb_reattached_process); + discard_queued_stop_replies (-1); + for_each_inferior (&all_threads, clear_pending_status_callback); + /* In non-stop mode, we must send a stop reply for each stopped thread. In all-stop mode, just send one for the first stopped thread we find. */ if (non_stop) { - discard_queued_stop_replies (-1); find_inferior (&all_threads, queue_stop_reply_callback, NULL); /* The first is sent immediatly. OK is sent if there is no @@ -2560,18 +2653,53 @@ handle_status (char *own_buf) } else { + struct inferior_list_entry *thread = NULL; + pause_all (0); stabilize_threads (); gdb_wants_all_threads_stopped (); - if (all_threads.head) - { - struct target_waitstatus status; + /* We can only report one status, but we might be coming out of + non-stop -- if more than one thread is stopped with + interesting events, leave events for the threads we're not + reporting now pending. They'll be reported the next time the + threads are resumed. Start by marking all interesting events + as pending. */ + for_each_inferior (&all_threads, set_pending_status_callback); + + /* Prefer the last thread that reported an event to GDB (even if + that was a GDB_SIGNAL_TRAP). */ + if (last_status.kind != TARGET_WAITKIND_IGNORE + && last_status.kind != TARGET_WAITKIND_EXITED + && last_status.kind != TARGET_WAITKIND_SIGNALLED) + thread = find_inferior_id (&all_threads, last_ptid); + + /* If the last event thread is not found for some reason, look + for some other thread that might have an event to report. */ + if (thread == NULL) + thread = find_inferior (&all_threads, + find_status_pending_thread_callback, NULL); + + /* If we're still out of luck, simply pick the first thread in + the thread list. */ + if (thread == NULL) + thread = all_threads.head; + + if (thread != NULL) + { + struct thread_info *tp = (struct thread_info *) thread; + + /* We're reporting this event, so it's no longer + pending. */ + tp->status_pending_p = 0; + + /* GDB assumes the current thread is the thread we're + reporting the status for. */ + general_thread = thread->id; + set_desired_inferior (1); - status.kind = TARGET_WAITKIND_STOPPED; - status.value.sig = GDB_SIGNAL_TRAP; - prepare_resume_reply (own_buf, - all_threads.head->id, &status); + gdb_assert (tp->last_status.kind != TARGET_WAITKIND_IGNORE); + prepare_resume_reply (own_buf, tp->entry.id, &tp->last_status); } else strcpy (own_buf, "W00"); diff --git a/gdb/remote.c b/gdb/remote.c index 8366c5ddc50..70946b17667 100644 --- a/gdb/remote.c +++ b/gdb/remote.c @@ -1561,7 +1561,18 @@ remote_add_inferior (int fake_pid_p, int pid, int attached) static void remote_add_thread (ptid_t ptid, int running) { - add_thread (ptid); + struct remote_state *rs = get_remote_state (); + + /* GDB historically didn't pull threads in the initial connection + setup. If the remote target doesn't even have a concept of + threads (e.g., a bare-metal target), even if internally we + consider that a single-threaded target, mentioning a new thread + might be confusing to the user. Be silent then, preserving the + age old behavior. */ + if (rs->starting_up) + add_thread_silent (ptid); + else + add_thread (ptid); set_executing (ptid, running); set_running (ptid, running); @@ -1639,9 +1650,15 @@ remote_notice_new_inferior (ptid_t currthread, int running) /* If we found a new inferior, let the common code do whatever it needs to with it (e.g., read shared libraries, insert - breakpoints). */ + breakpoints), unless we're just setting up an all-stop + connection. */ if (inf != NULL) - notice_new_inferior (currthread, running, 0); + { + struct remote_state *rs = get_remote_state (); + + if (non_stop || !rs->starting_up) + notice_new_inferior (currthread, running, 0); + } } } @@ -3309,6 +3326,28 @@ stop_reply_extract_thread (char *stop_reply) return null_ptid; } +/* Determine the remote side's current thread. If we have a stop + reply handy (in WAIT_STATUS), maybe it's a T stop reply with a + "thread" register we can extract the current thread from. If not, + ask the remote which is the current thread with qC. The former + method avoids a roundtrip. */ + +static ptid_t +get_current_thread (char *wait_status) +{ + ptid_t ptid; + + /* Note we don't use remote_parse_stop_reply as that makes use of + the target architecture, which we haven't yet fully determined at + this point. */ + if (wait_status != NULL) + ptid = stop_reply_extract_thread (wait_status); + if (ptid_equal (ptid, null_ptid)) + ptid = remote_current_thread (inferior_ptid); + + return ptid; +} + /* Query the remote target for which is the current thread/process, add it to our tables, and update INFERIOR_PTID. The caller is responsible for setting the state such that the remote end is ready @@ -3329,18 +3368,8 @@ add_current_inferior_and_thread (char *wait_status) inferior_ptid = null_ptid; - /* Now, if we have thread information, update inferior_ptid. First - if we have a stop reply handy, maybe it's a T stop reply with a - "thread" register we can extract the current thread from. If - not, ask the remote which is the current thread, with qC. The - former method avoids a roundtrip. Note we don't use - remote_parse_stop_reply as that makes use of the target - architecture, which we haven't yet fully determined at this - point. */ - if (wait_status != NULL) - ptid = stop_reply_extract_thread (wait_status); - if (ptid_equal (ptid, null_ptid)) - ptid = remote_current_thread (inferior_ptid); + /* Now, if we have thread information, update inferior_ptid. */ + ptid = get_current_thread (wait_status); if (!ptid_equal (ptid, null_ptid)) { @@ -3510,10 +3539,35 @@ remote_start_remote (int from_tty, struct target_ops *target, int extended_p) strcpy (wait_status, rs->buf); } + /* Fetch thread list. */ + target_find_new_threads (); + /* Let the stub know that we want it to return the thread. */ set_continue_thread (minus_one_ptid); - add_current_inferior_and_thread (wait_status); + if (thread_count () == 0) + { + /* Target has no concept of threads at all. GDB treats + non-threaded target as single-threaded; add a main + thread. */ + add_current_inferior_and_thread (wait_status); + } + else + { + /* We have thread information; select the thread the target + says should be current. If we're reconnecting to a + multi-threaded program, this will ideally be the thread + that last reported an event before GDB disconnected. */ + inferior_ptid = get_current_thread (wait_status); + if (ptid_equal (inferior_ptid, null_ptid)) + { + /* Odd... The target was able to list threads, but not + tell us which thread was current (no "thread" + register in T stop reply?). Just pick the first + thread in the thread list then. */ + inferior_ptid = thread_list->ptid; + } + } /* init_wait_for_inferior should be called before get_offsets in order to manage `inserted' flag in bp loc in a correct state. diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 6f7aa377a21..9ba11922a54 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,8 @@ +2014-01-08 Pedro Alves + + * gdb.threads/reconnect-signal.c: New file. + * gdb.threads/reconnect-signal.exp: New file. + 2014-01-07 Jan Kratochvil * gdb.base/source-dir.exp: New file. diff --git a/gdb/testsuite/gdb.threads/reconnect-signal.c b/gdb/testsuite/gdb.threads/reconnect-signal.c new file mode 100644 index 00000000000..498ecb21aab --- /dev/null +++ b/gdb/testsuite/gdb.threads/reconnect-signal.c @@ -0,0 +1,67 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2013-2014 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +#include +#include +#include + +static pthread_t thread_2; +sig_atomic_t unlocked; + +/* The test has three threads, and it's always thread 2 that gets the + signal, to avoid spurious passes in case the remote side happens to + always pick the first or the last thread in the list as the + current/status thread on reconnection. */ + +static void * +start2 (void *arg) +{ + unsigned int count; + + pthread_kill (thread_2, SIGUSR1); + + for (count = 1; !unlocked && count != 0; count++) + usleep (1); + return NULL; +} + +static void * +start (void *arg) +{ + pthread_t thread; + + pthread_create (&thread, NULL, start2, NULL); + pthread_join (thread, NULL); + return NULL; +} + +void +handle (int sig) +{ + unlocked = 1; +} + +int +main () +{ + signal (SIGUSR1, handle); + + pthread_create (&thread_2, NULL, start, NULL); + pthread_join (thread_2, NULL); + + return 0; +} diff --git a/gdb/testsuite/gdb.threads/reconnect-signal.exp b/gdb/testsuite/gdb.threads/reconnect-signal.exp new file mode 100644 index 00000000000..ccb4a4239a8 --- /dev/null +++ b/gdb/testsuite/gdb.threads/reconnect-signal.exp @@ -0,0 +1,84 @@ +# Copyright 2013-2014 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . */ + +# Test that disconnecting and reconnecting doesn't lose signals. + +set gdbserver_reconnect_p 1 +if { [info proc gdb_reconnect] == "" } { + return 0 +} + +standard_testfile +set executable ${testfile} + +if { [gdb_compile_pthreads \ + "${srcdir}/${subdir}/${srcfile}" \ + "${binfile}" \ + executable {debug}] != "" } { + untested "Couldn't compile test program." + return -1 +} + +clean_restart $executable + +if ![runto_main] then { + fail "Can't run to main" + return 0 +} + +gdb_test "continue" "signal SIGUSR1.*" "continue to signal" + +# Check that it's thread 2 that is selected. +gdb_test "info threads" "\\* 2 .*" "thread 2 is selected" + +set msg "save \$pc after signal" +set saved_pc "" +gdb_test_multiple "print/x \$pc" $msg { + -re "\\\$$decimal = (\[^\r\n\]*)\r\n$gdb_prompt $" { + set saved_pc $expect_out(1,string) + pass $msg + } +} + +# Switch to the other thread. +gdb_test "thread 1" "thread 1.*" "switch to thread 1" + +# Force GDB to select thread 1 on the remote end as well. +gdb_test "print/x \$pc" + +gdb_test "disconnect" "Ending remote debugging\\." "disconnect after signal" + +set test "reconnect after signal" + +set res [gdb_reconnect] +if { [lindex $res 0] == 0 } { + pass $test +} else { + fail $test + return 0 +} + +# Check that thread 2 is re-selected. +gdb_test "info threads" "\\* 2 .*" "thread 2 is selected on reconnect" + +# Check that the program is still alive, and stopped in the same spot. +gdb_test "print/x \$pc" "\\\$$decimal = $saved_pc" "check \$pc after signal" + +# Check that we didn't lose the signal. +gdb_test "info program" "stopped with signal SIGUSR1,.*" + +# Nor does the program. +gdb_test "b handle" "Breakpoint .*" "set breakpoint in signal handler" +gdb_test "continue" "handle.*" "continue to signal handler" -- 2.30.2