From b8dad04b688e9cb9c34b0c0beba09fd0dc626389 Mon Sep 17 00:00:00 2001 From: Zack Weinberg Date: Fri, 27 Oct 2000 20:22:28 +0000 Subject: [PATCH] configure.in: If not NO_MINUS_C_MINUS_O, substitute OUTPUT_OPTION with '-o $@'. * configure.in: If not NO_MINUS_C_MINUS_O, substitute OUTPUT_OPTION with '-o $@'. Make zlibdir, zlibinc relative to top level. Kill oldstyle_subdirs. Do not include $srcdir/$s/Makefile.in in all_lang_makefiles, but do include $outputs. Do not run configure.lang from config.status. Rearrange warning-flag logic to correspond to what the makefile wants. Put special vax stage1 options in @stage1_flags@ not @stage1_warn_cflags@. Don't do anything with extra_c_objs, extra_cxx_objs, or extra_cpp_objs. (--enable-c-cpplib): AC_SUBST(maybe_cpplib) with "libcpp.a" if switch is given, nothing otherwise. * configure.lang: Delete. * Makefile.in: Expunge all traces of extra_c_objs, extra_cxx_objs, and extra_cpp_objs. Set MAYBE_CPPLIB from @maybe_cpplib@. Add $(MAYBE_CPPLIB) to C_AND_OBJC_OBJS. Set warning options via a three level scheme so that -pedantic and -Wtraditional are not used for non-C front ends: LOOSE_WARN, STRICT1_WARN, STRICT2_WARN -> $(@D)-warn, GCC_WARN_CFLAGS -> WARN_CFLAGS. Distinguish STAGE1_CFLAGS from BOOT_CFLAGS. Add -I$(@D) and -I$(srcdir)/$(@D) to INCLUDES. Set OUTPUT_OPTION, ZLIB, ZLIBINC. Do not set P, LANG_FLAGS_TO_PASS. Add OUTPUT_OPTION to all object-file generation rules. Wrap all rules that change the current directory in parentheses; pmake doesn't spawn a new shell for each command. Expunge all references to $(P). When one command depends on another and they're run all at once, use && to separate them, not ;. Add libgcc_s$(SHLIB_EXT) to files deleted on make clean. Force OUTPUT_OPTION='-o $@' in stage2 and beyond. * cp/Make-lang.in, f/Make-lang.in, java/Make-lang.in, objc/Make-lang.in: Wrap all rules that change the current directory in parentheses. Expunge all references to $(P). When one command depends on another and they're run all at once, use && to separate them, not ;. Add OUTPUT_OPTION to all object-file generation rules. Delete obsolete variables. Move all build rules here from the corresponding Makefile.in and adapt to the new environment. * cp/Makefile.in, f/Makefile.in, java/Makefile.in, objc/Makefile.in: Delete. * cp/config-lang.in, f/config-lang.in, java/config-lang.in: Delete outputs= line. From-SVN: r37088 --- gcc/ChangeLog | 314 +++++++++++++---------- gcc/Makefile.in | 180 +++++++++----- gcc/config.in | 3 +- gcc/configure | 539 ++++++++++++++++++++-------------------- gcc/configure.in | 54 ++-- gcc/configure.lang | 233 ----------------- gcc/cp/ChangeLog | 12 + gcc/cp/Make-lang.in | 119 ++++++--- gcc/cp/Makefile.in | 323 ------------------------ gcc/cp/config-lang.in | 2 - gcc/f/ChangeLog | 12 + gcc/f/Make-lang.in | 352 ++++++++++++++++++-------- gcc/f/Makefile.in | 472 ----------------------------------- gcc/f/config-lang.in | 2 - gcc/java/ChangeLog | 12 + gcc/java/Make-lang.in | 205 +++++++++------ gcc/java/Makefile.in | 329 ------------------------ gcc/java/config-lang.in | 2 - gcc/objc/Make-lang.in | 26 +- gcc/objc/Makefile.in | 73 ------ 20 files changed, 1081 insertions(+), 2183 deletions(-) delete mode 100644 gcc/configure.lang delete mode 100644 gcc/cp/Makefile.in delete mode 100644 gcc/f/Makefile.in delete mode 100644 gcc/java/Makefile.in delete mode 100644 gcc/objc/Makefile.in diff --git a/gcc/ChangeLog b/gcc/ChangeLog index 35ae9ddc335..3eb15f84d89 100644 --- a/gcc/ChangeLog +++ b/gcc/ChangeLog @@ -1,3 +1,43 @@ +2000-10-27 Zack Weinberg + + * configure.in: If not NO_MINUS_C_MINUS_O, substitute + OUTPUT_OPTION with '-o $@'. Make zlibdir, zlibinc relative to + top level. Kill oldstyle_subdirs. Do not include + $srcdir/$s/Makefile.in in all_lang_makefiles, but do include + $outputs. Do not run configure.lang from config.status. + Rearrange warning-flag logic to correspond to what the + makefile wants. Put special vax stage1 options in + @stage1_flags@ not @stage1_warn_cflags@. Don't do anything + with extra_c_objs, extra_cxx_objs, or extra_cpp_objs. + (--enable-c-cpplib): AC_SUBST(maybe_cpplib) with "libcpp.a" if + switch is given, nothing otherwise. + * configure.lang: Delete. + + * Makefile.in: Expunge all traces of extra_c_objs, + extra_cxx_objs, and extra_cpp_objs. Set MAYBE_CPPLIB from + @maybe_cpplib@. Add $(MAYBE_CPPLIB) to C_AND_OBJC_OBJS. Set + warning options via a three level scheme so that -pedantic and + -Wtraditional are not used for non-C front ends: LOOSE_WARN, + STRICT1_WARN, STRICT2_WARN -> $(@D)-warn, GCC_WARN_CFLAGS -> + WARN_CFLAGS. Distinguish STAGE1_CFLAGS from BOOT_CFLAGS. + Add -I$(@D) and -I$(srcdir)/$(@D) to INCLUDES. + Set OUTPUT_OPTION, ZLIB, ZLIBINC. Do not set P, + LANG_FLAGS_TO_PASS. Add OUTPUT_OPTION to all object-file + generation rules. Wrap all rules that change the current + directory in parentheses; pmake doesn't spawn a new shell for + each command. Expunge all references to $(P). When one + command depends on another and they're run all at once, use && + to separate them, not ;. Add libgcc_s$(SHLIB_EXT) to files + deleted on make clean. Force OUTPUT_OPTION='-o $@' in stage2 + and beyond. + + * objc/Make-lang.in: Wrap all rules that change the current + directory in parentheses. Expunge all references to $(P). + When one command depends on another and they're run all at + once, use && to separate them, not ;. Add OUTPUT_OPTION to + all object-file generation rules. Delete obsolete variables. + * objc/Makefile.in: Delete. + 2000-10-27 Jakub Jelinek * calls.c (expand_call): If sibcall_failure is set during pass 1, @@ -10,7 +50,7 @@ 2000-10-26 Richard Henderson - * calls.c (expand_call): Supress sibcall if we have a + * calls.c (expand_call): Supress sibcall if we have a BLKmode return in registers. 2000-10-26 Bernd Schmidt @@ -63,8 +103,8 @@ 2000-10-25 Neil Booth - * cpp.texi: Update with implementation-defined behavior and - internal limits. + * cpp.texi: Update with implementation-defined behavior and + internal limits. 2000-10-25 Jakub Jelinek @@ -82,14 +122,14 @@ Wed Oct 25 01:02:44 EDT 2000 John Wehle (john@feith.com) * config/mn10300/mn10300.c (secondary_reload_class): Treat pseudos like memory. - + 2000-10-24 Jim Wilson * expmed.c (store_bit_field): Move integer pun code down after code that calls emit_move_insn for entire register move. * stor-layout.c (compute_record_mode): Revert Mar 25, Aug 18, and Oct 20 changes. Only store mode in TYPE_MODE if RECORD_TYPE. - + 2000-10-24 Richard Henderson * rtlanal.c (rtx_unstable_p, rtx_varies_p): Don't consider pic @@ -97,13 +137,13 @@ Wed Oct 25 01:02:44 EDT 2000 John Wehle (john@feith.com) 2000-10-24 Aldy Hernandez - * gcse.c (cprop_insn): do not propagate constants into jump_insn - for machines with CC0 more than once. + * gcse.c (cprop_insn): do not propagate constants into jump_insn + for machines with CC0 more than once. 2000-10-24 Richard Henderson , Aldy - * config/mn10300/mn10300.h (PREFERRED_RELOAD_CLASS): Treat - pseudos just like memory. + * config/mn10300/mn10300.h (PREFERRED_RELOAD_CLASS): Treat + pseudos just like memory. 2000-10-24 Alexandre Oliva @@ -142,7 +182,7 @@ Wed Oct 25 01:02:44 EDT 2000 John Wehle (john@feith.com) 2000-10-23 Richard Henderson - * config/ia64/ia64.c (ia64_expand_prologue): Mark extra + * config/ia64/ia64.c (ia64_expand_prologue): Mark extra output registers as fixed. (ia64_function_epilogue): Undo output fixation. @@ -206,8 +246,8 @@ Wed Oct 18 11:16:40 2000 Donald Lindsay 2000-10-21 Chandrakala Chavva * libgcc-std.ver (__addvsi3, __addvdi3, __subvsi3, __subvdi3, - __mulvsi3, __negvsi2, __negvdi2, __absvsi2, __absvdi2, __mulvdi3): - New functions. + __mulvsi3, __negvsi2, __negvdi2, __absvsi2, __absvdi2, __mulvdi3): + New functions. 2000-10-22 Alexandre Oliva @@ -375,7 +415,7 @@ Fri Oct 20 13:33:16 2000 Richard Kenner if one is still available after register allocation. 2000-10-20 J. David Anglin - + * t-vax: New file. Don't build modules from libgcc1.c. Fri Oct 20 00:57:00 EDT 2000 John Wehle (john@feith.com) @@ -418,7 +458,7 @@ Fri Oct 20 00:57:00 EDT 2000 John Wehle (john@feith.com) factor of 2. * config/ia64/ia64.md (movdi_symbolic): Document loss of REG_LABEL notes. - + 2000-10-19 Chandrakala Chavva * libgcc2.c (_mulvsi3): Change variables u and v to a and b. @@ -438,47 +478,47 @@ Thu Oct 19 14:25:11 MET DST 2000 Jan Hubicka 2000-10-18 Chandrakala Chavva - * expmed.c (expand_mult): Don't do synth_mult optimization for -ftrapv. - Use smulv_optab for -ftrapv. - (expand_mult_highpart): Use unsigned multiply. - (expand_divmod): Special-case division by -1. - For EXACT_DIV_EXPR, do right shift first, then the multiply. - For complex divide, use abs with unsigned result. - * expr.c (force_operand): Use unsigned multiply. - (expand_expr): Use overflow-trapping optabs for signed types if - flag_trapv. - If flag_trapv, don't generate a recursive call with EXPAND_SUM - if the type is signed and the original call wasn't EXPAND_SUM or - EXPAND_INITIALIZER. - * expr.h (addv_optab, subv_optab, smulv_optab, sdivv_optab): Declare. - (negv_optab, absv_optab): Declare. - * flags.h (flag_trapv): Declare. - * genopinit.c (optabs): Add entries for addv_optab, subv_optab, - smulv_optab, sdivv_optab, negv_optab and absv_optab. + * expmed.c (expand_mult): Don't do synth_mult optimization for -ftrapv. + Use smulv_optab for -ftrapv. + (expand_mult_highpart): Use unsigned multiply. + (expand_divmod): Special-case division by -1. + For EXACT_DIV_EXPR, do right shift first, then the multiply. + For complex divide, use abs with unsigned result. + * expr.c (force_operand): Use unsigned multiply. + (expand_expr): Use overflow-trapping optabs for signed types if + flag_trapv. + If flag_trapv, don't generate a recursive call with EXPAND_SUM + if the type is signed and the original call wasn't EXPAND_SUM or + EXPAND_INITIALIZER. + * expr.h (addv_optab, subv_optab, smulv_optab, sdivv_optab): Declare. + (negv_optab, absv_optab): Declare. + * flags.h (flag_trapv): Declare. + * genopinit.c (optabs): Add entries for addv_optab, subv_optab, + smulv_optab, sdivv_optab, negv_optab and absv_optab. (gen_insn): Interpret '$P' as requiring an integer mode, - including partial integer modes. - * loop.c (emit_iv_add_mult): Use unsigned expand_mult_add. - (product_cheap_p): Use unsigned expand_mult. - * optabs.c (addv_optab, subv_optab, smulv_optab, sdivv_optab): Define. - (negv_optab, absv_optab): Define. - (expand_binop): Use overflow-trapping optabs for signed types if - flag_trapv. - Handle negv_optab libe neg_optab. - (expand_abs): Take result_unsignedp argument instead of unsignedp one. - Use overflow-trapping optabs for signed result if flag_trapv. - (expand_complex_abs): Use overflow-trapping optabs for signed types if - flag_trapv. - Don't open-code complex absolute-value operation for flag_trapv. - (init_optabs): Initialize addv_optab, subv_optab, smulv_optab, - sdivv_optab, negv_optab and absv_optab. - * toplev.c (flag_trapv): Define. - (lang_independent_options f_options): Include flag_trapv. - * tree.h (TYPE_TRAP_SIGNED): Define. - * libgcc2.c (__addvsi3, __addvdi3, __subvsi3,__subvsi3, __subvdi3, - __mulvsi3, __negvsi2, __negvdi2, __absvsi2, __absvdi2, __mulvdi3): - New functions. - * Makefile.in: add _absvsi2 _absvdi2 _addvsi3 _addvdi3 _subvsi3 - _subvdi3 _mulvsi3 _mulvdi3 _negvsi2 _negvdi2. + including partial integer modes. + * loop.c (emit_iv_add_mult): Use unsigned expand_mult_add. + (product_cheap_p): Use unsigned expand_mult. + * optabs.c (addv_optab, subv_optab, smulv_optab, sdivv_optab): Define. + (negv_optab, absv_optab): Define. + (expand_binop): Use overflow-trapping optabs for signed types if + flag_trapv. + Handle negv_optab libe neg_optab. + (expand_abs): Take result_unsignedp argument instead of unsignedp one. + Use overflow-trapping optabs for signed result if flag_trapv. + (expand_complex_abs): Use overflow-trapping optabs for signed types if + flag_trapv. + Don't open-code complex absolute-value operation for flag_trapv. + (init_optabs): Initialize addv_optab, subv_optab, smulv_optab, + sdivv_optab, negv_optab and absv_optab. + * toplev.c (flag_trapv): Define. + (lang_independent_options f_options): Include flag_trapv. + * tree.h (TYPE_TRAP_SIGNED): Define. + * libgcc2.c (__addvsi3, __addvdi3, __subvsi3,__subvsi3, __subvdi3, + __mulvsi3, __negvsi2, __negvdi2, __absvsi2, __absvdi2, __mulvdi3): + New functions. + * Makefile.in: add _absvsi2 _absvdi2 _addvsi3 _addvdi3 _subvsi3 + _subvdi3 _mulvsi3 _mulvdi3 _negvsi2 _negvdi2. 2000-10-18 Geoffrey Keating David V. Henkel-Wallace @@ -503,7 +543,7 @@ Thu Oct 19 14:25:11 MET DST 2000 Jan Hubicka (flag_no_nonansi_builtin): Likewise. (init_decl_processing): Adjust call to c_common_nodes_and_builtins. - + 2000-10-18 Marc Espie * tm.texi (LIBGCC_SPEC): Synch with reality. @@ -557,18 +597,18 @@ Thu Oct 19 14:25:11 MET DST 2000 Jan Hubicka * emit-rtl.c (init_emit_once): Initialize the const_int_htab earlier. - + 2000-10-18 Jan Hubicka - * i386.c (ix86_comparison_operator, put_condition_code, - ix86_match_ccmode, ix86_cc_mode): Handle CCRCmode. - (ix86_expand_strlensi_unroll_1): Use CCRCmode. - * i386.h (EXTRA_CC_MODES): Add CCRCmode. - * i386.md (adddi and negdi splitter): Use CCRCmode. - (add?i_3, add?i_4, add?i_5): Use CCRCmode; swap operands - (subsi3_carry): add '*' - (addsi3_carry_rc, subsi3_carry_rc, x86_movsicc_0_m1_rc): New. - (cmp to add peep2): Use CCRCmode; swap operands. + * i386.c (ix86_comparison_operator, put_condition_code, + ix86_match_ccmode, ix86_cc_mode): Handle CCRCmode. + (ix86_expand_strlensi_unroll_1): Use CCRCmode. + * i386.h (EXTRA_CC_MODES): Add CCRCmode. + * i386.md (adddi and negdi splitter): Use CCRCmode. + (add?i_3, add?i_4, add?i_5): Use CCRCmode; swap operands + (subsi3_carry): add '*' + (addsi3_carry_rc, subsi3_carry_rc, x86_movsicc_0_m1_rc): New. + (cmp to add peep2): Use CCRCmode; swap operands. 2000-10-18 Kazu Hirata @@ -643,13 +683,13 @@ Tue Oct 17 20:05:51 2000 Martin Buchholz * cppinit.c (new_pending_directive) : New option OPT_target__help. (cpp_handle_option): Support this new option. * invoke.texi: Added notes about --target-help option. - + 2000-10-17 Graham Stott - + * config/i386/i386.md (testqi_1): Add missing operand prefix for operand 0. * config/i386/i386-protos.h: Add missing prototype. - + 2000-10-17 Diego Novillo * config/i386/unix.h (ASM_OUTPUT_MI_THUNK): Symbol @@ -779,7 +819,7 @@ Tue Oct 17 20:05:51 2000 Martin Buchholz 2000-10-13 Kaveh R. Ghazi * Makefile.in (c-parse.c, tradcif.c): Create atomically. - + * objc/Make-lang.in (objc-parse.c): Likewise. 2000-10-13 Richard Earnshaw @@ -811,29 +851,29 @@ Tue Oct 17 20:05:51 2000 Martin Buchholz 2000-10-12 Mark Mitchell - Remove obstacks. + Remove obstacks. * Makefile.in (ggc-callbacks.o): Remove target. - (flow.o): Depend on GGC_H. + (flow.o): Depend on GGC_H. * alias.c (init_alias_analysis): Remove ggc_p conditionals. - (end_alias_analysis): Likewise. + (end_alias_analysis): Likewise. * basic-block.h (init_flow): New function. - (allocate_reg_life_data): Declare. + (allocate_reg_life_data): Declare. * bb-reorder.c (function_obstack): Replace with ... (flow_obstack): ... new variable. - (fixup_reorder_chain): Use it. + (fixup_reorder_chain): Use it. * c-decl.c (ggc_p): Remove. - (caller-save.c): Don't call oballoc/obfree. + (caller-save.c): Don't call oballoc/obfree. * combine.c (struct undobuf): Remove storage. (try_combine): Don't call oballoc. - (undo_all): Don't call obfree. + (undo_all): Don't call obfree. * cse.c (insert): Use xmalloc, not oballoc. - (cse_main): Adjust accordingly. + (cse_main): Adjust accordingly. * dwarf2out.c (save_rtx): Remove obstack code. - (dwarf2out_init): Remove ggc_p conditionals. + (dwarf2out_init): Remove ggc_p conditionals. * emit-rtl.c (rtl_obstack): Remove. (gen_rtx_CONST_INT): Remove ggc_p conditionals. (make_insn_raw): Likewise. @@ -842,19 +882,19 @@ Tue Oct 17 20:05:51 2000 Martin Buchholz (emit_insn): Likewise. (gen_sequence): Likewise. (copy_insn_1): Remove handling of `b' RTL components. - (init_emit_once): Remove ggc_p conditionals. + (init_emit_once): Remove ggc_p conditionals. * except.c (create_rethrow_ref): Don't fool with obstacks. (add_partial_entry): Likewise. (call_get_eh_context): Likewise. (begin_protect_partials): Likewise. - (protect_with_terminate): Likewise. + (protect_with_terminate): Likewise. * explow.c - (plus_constant_wide): Likewise. + (plus_constant_wide): Likewise. * expr.c (init_expr_once): Likewise. (emit_block_move): Likewise. (clear_storage): Likewise. - (expand_expr): Likewise. + (expand_expr): Likewise. * flow.c (function_obstack): Remove. (flow_obstack): New variable. (flow_firstobj): Likewise. @@ -864,7 +904,7 @@ Tue Oct 17 20:05:51 2000 Martin Buchholz (calculate_global_regs_live): Likewise. (allocate_bb_life_data): Make it static. Likewiwse. (init_flow): New function. - (size_int_type_wide): Remove ggc_p conditionals. + (size_int_type_wide): Remove ggc_p conditionals. * function.c (push_function_context_to): Don't call save_tree_status. (pop_function_context_from): Or restore_tree_status. @@ -874,28 +914,28 @@ Tue Oct 17 20:05:51 2000 Martin Buchholz (insns_for_mem_walk): Don't mess with obstacks. (instantiate_decls): Likewise. (trampoline_address): Likewise. - (expand_function_end): Likewise. + (expand_function_end): Likewise. * function.h (sturct function): Remove obstack-related variables. (save_tree_status): Don't declare. - (restore_tree_status): Likewise. + (restore_tree_status): Likewise. * gcse.c (compute_can_copy): - Don't call oballoc/obfree. + Don't call oballoc/obfree. * genattrtab.c (operate_exp): Remove ggc_p conditionals. (simplify_cond): Likewise. (simplify_test_exp): Don't mess with obstacks. - (optimize_attrs): Likewise. + (optimize_attrs): Likewise. * gengenrtl.c (gendef): Don't include - ggc_p conditionals. - * ggc-callbacks.c (ggc_p): Remove. - * ggc-none.c (ggc_p): Remove. - * ggc.h (ggc_p): Don't declare. + ggc_p conditionals. + * ggc-callbacks.c (ggc_p): Remove. + * ggc-none.c (ggc_p): Remove. + * ggc.h (ggc_p): Don't declare. * integrate.c (save_for_inline): Don't mess with obstacks. (integrate_decl_tree): Likewise. - (output_inline_function): Likewise. + (output_inline_function): Likewise. * lists.c - (init_EXPR_INSN_LIST_cache): Likewise. + (init_EXPR_INSN_LIST_cache): Likewise. * loop.c (temp_obstack): Remove. (rtl_obstack): Likewise. @@ -905,37 +945,37 @@ Tue Oct 17 20:05:51 2000 Martin Buchholz (find_mem_givs): Likewise. (record_biv): Likewise. (general_induction_var): Likewise. - (product_cheap_p): Likewse. + (product_cheap_p): Likewse. * optabs.c (init_one_libfunc): Remove - ggc_p conditional. + ggc_p conditional. * print-tree.c (debug_tree): Don't use oballoc/obfree. - (print_node): Likewise. + (print_node): Likewise. * profile.c (output_func_start_profiler): - Remove call to temporary_allocation. + Remove call to temporary_allocation. * reload1.c - (eliminate_regs_in_insn): Don't mess with obstacks. + (eliminate_regs_in_insn): Don't mess with obstacks. * resource.c (mark_target_live_regs): Use xmalloc. - (free_resource_info): Free the memory. + (free_resource_info): Free the memory. * rtl.c (rtl_obstack): Remove. (rtvec_alloc): Don't mess with obstacks. (rtx_alloc): Likewise. (rtx_free): Remove. (copy_rtx): Don't handle `b' cases. - (read_rtx): Use a local rtl_obstack. + (read_rtx): Use a local rtl_obstack. * rtl.h (oballoc): Remove. (obfree): Likewise. (pop_obstacks): Likewise. (push_obstacks): Likewise. (allocate_bb_life_data): Likewise. (allocate_reg_life_data): Likewise. - (rtx_free): Likewise. + (rtx_free): Likewise. * sdbout.c (sdbout_queue_anonymous_type): - Use tree_cons, not saveable_tree_cons. + Use tree_cons, not saveable_tree_cons. * simplify-rtx.c - (cselib_init): Don't mess with obstacks. + (cselib_init): Don't mess with obstacks. * stmt.c (mark_block_nesting): Mark the label_chain. (epxand_label): Use ggc_alloc, not oballoc. @@ -946,15 +986,15 @@ Tue Oct 17 20:05:51 2000 Martin Buchholz (expand_anon_union_decl): Likewise. (add_case_node): Use xmalloc, not oballoc. (free_case_nodes): New function. - (expand_end_case): Call it. + (expand_end_case): Call it. * stor-layout.c (layout_type): Don't mess with obstacks. - (layout_type): Likewise. + (layout_type): Likewise. * toplev.c (wrapup_global_declarations): Likewise. (compile_file): Remove ggc_p conditionals. (rest_of_compilation): Call init_flow. Remove ggc_p conditionals. - (decode_f_option): Remove ggc_p conditionals. + (decode_f_option): Remove ggc_p conditionals. * tree.c (function_maybepermanent_obstack): Remove. (maybepermanent_obstack): Likewise. @@ -1030,7 +1070,7 @@ Tue Oct 17 20:05:51 2000 Martin Buchholz (build_reference_type): Likewise. (build_index_type): Likewise. (build_range_type): Likewise. - (dump_tree_statistics): Don't print obstack information. + (dump_tree_statistics): Don't print obstack information. * tree.h (struct tree_common): Remove permanent_flag. (TREE_PERMANENT): Remove. @@ -1066,7 +1106,7 @@ Tue Oct 17 20:05:51 2000 Martin Buchholz (debug_obstack): Likewise. (rtl_in_current_obstack): Likewise. (rtl_in_saveable_obstack): Likewise. - (obfree): Likewise. + (obfree): Likewise. * varasm.c (current_obstack): Remove. (saveable_obstack): Remove. (rtl_obstack): Remove. @@ -1094,7 +1134,7 @@ Tue Oct 17 20:05:51 2000 Martin Buchholz * config/rs6000/rs6000.c (output_toc): Remove ggc_p conditional. (rs6000_encode_section_info): Likewise. * config/sh/sh.c (get_fpscr_rtx): Likewise. - + Thu Oct 12 16:02:31 MET DST 2000 Jan Hubicka * i386.md (adddi3, subdi3 splitters): Update for new pattern. @@ -1138,7 +1178,7 @@ Thu Oct 12 16:02:31 MET DST 2000 Jan Hubicka the wanted type is not a pointer target. 2000-10-11 Michael Meeks - Joseph S. Myers + Joseph S. Myers * c-typeck.c (check_modify_expr): New function. (build_modify_expr): Call it if warn_sequence_point. @@ -1201,7 +1241,7 @@ Tue Oct 10 23:14:33 2000 Denis Chertykov 2000-10-09 Richard Earnshaw - * arm.c: Miscellaneous white space and comment clean-ups. No + * arm.c: Miscellaneous white space and comment clean-ups. No functional change. * arm.md: Likewise. @@ -1224,7 +1264,7 @@ Tue Oct 10 23:14:33 2000 Denis Chertykov (conditional execution splits): Split using predication format. (define_cond_exec): Define. * arm.c (arm_print_operand): handle insn predicate. - + 2000-10-09 Gerald Pfeifer * README.NS32K: Remove file. @@ -1252,7 +1292,7 @@ Tue Oct 10 23:14:33 2000 Denis Chertykov uses different cache variables. (AM_WITH_NLS): Use GCC_PATH_PROG and GCC_PATH_PROG_WITH_TEST. * configure: Regenerated. - + 2000-10-08 Richard Henderson * Makefile.in (libgcc.mk): Pass SHLIB_EXT, not SHLIB_LIBS. @@ -1360,7 +1400,7 @@ Tue Oct 10 23:14:33 2000 Denis Chertykov (compute_block_forward_dependences): Use forward_dependency_cache. (schedule_insns): Allocate and free memory for anti/output/forward dependencies caches. - + 2000-10-06 Alexandre Oliva * config/sh/sh.md (call, call_value): Use `TARGET_SH2' instead of @@ -1538,7 +1578,7 @@ Mon Oct 2 14:50:14 MET DST 2000 Jan Hubicka * config/float-c4x.h: New. * configure.in (c4x-*): Set float_format to c4x. - * configure: Regenerate. + * configure: Regenerate. 2000-10-02 Kaveh R. Ghazi @@ -1566,10 +1606,10 @@ Mon Oct 2 14:50:14 MET DST 2000 Jan Hubicka * config/spur: Likewise. * configure.in: Remove configury bits for above targets. * configure: Regenerated. - + * configure.in: Don't configure chill by default. * configure: Regenerated. - + * c-decl.c (c_expand_body): Don't generate RTL if flag_syntax_only. (lang_mark_false_label_stack): Remove. * c-lex.c (init_c_lex): Add file_info_tree as GC root. Allocate @@ -1582,7 +1622,7 @@ Mon Oct 2 14:50:14 MET DST 2000 Jan Hubicka * ggc-common.c (lang_mark_false_label_stack): Change type. * ggc.h (ggc_alloc_string): Add comment. (ggc_strdup): New function. - + Sat Sep 23 19:10:20 2000 Denis Chertykov * config/avr/avr.h (BRANCH_COST): Define as 0. @@ -1728,16 +1768,16 @@ Fri Sep 29 13:20:42 MET DST 2000 Jan Hubicka (output_message_text): New macro. * diagnostic.c (clear_text_info): Rename to - output_clear_message_text. + output_clear_message_text. (output_clear): Adjust. (output_finish): Rename to output_finalize_message. Tweek. - (output_to_stream): Adjust. + (output_to_stream): Adjust. 2000-09-28 Neil Booth * cpperror.c (_cpp_begin_message): Do the test for suppression - of warnings and pedantic warnings before the "is a warning an - error" tests. + of warnings and pedantic warnings before the "is a warning an + error" tests. * cppinit.c (cpp_handle_option): Remove surplus \n. * cpplex.c (ON_REST_ARG): Delete. (skip_block_comment): Initialise prevc. @@ -1798,22 +1838,22 @@ Tue 26-Sep-2000 18:25:38 BST Neil Booth Tue 26-Sep-2000 00:16:22 BST Neil Booth - * cpplex.c (parse_args): Don't set VOID_REST flag. + * cpplex.c (parse_args): Don't set VOID_REST flag. (CONTEXT_VARARGS): New flag. (maybe_paste_with_next): Set context earlier in loop. Use it. Do varargs test with CONTEXT_VARARGS flag. (push_arg_context): Set CONTEXT_VARARGS flag if we're pushing an argument context for a varargs argument. * cpplib.h (VOID_REST): Delete. - * gcc.dg/cpp/vararg1.c: Add test case. + * gcc.dg/cpp/vararg1.c: Add test case. 2000-09-25 Branko Cibej - * flags.h: Declare warning flag warn_system_headers. - * toplev.c: Define it. - (W_options): Add option -Wsystem-headers. - * diagnostic.c (count_error): Test warn_system_headers. - * invoke.texi: Add description for -Wsystem-headers. + * flags.h: Declare warning flag warn_system_headers. + * toplev.c: Define it. + (W_options): Add option -Wsystem-headers. + * diagnostic.c (count_error): Test warn_system_headers. + * invoke.texi: Add description for -Wsystem-headers. * cpplib.h (cpp_options): New member warn_system_headers. * cpphash.h (CPP_PEDANTIC, CPP_WTRADITIONAL): Don't test CPP_IN_SYSTEM_HEADER. @@ -1831,7 +1871,7 @@ Mon 25-Sep-2000 23:38:27 BST Neil Booth * cpplex.c (save_comment): Only store the initial '/' now. (lex_token): Combine handling of the two comment types. - Pass everything but the initial '/' to save_comment. + Pass everything but the initial '/' to save_comment. Mon 25-Sep-2000 23:31:45 BST Neil Booth @@ -2203,7 +2243,7 @@ Mon 25-Sep-2000 23:31:45 BST Neil Booth functions. Generalize to handle both C and C++. * Makefile.in (c-tree.info): New target. (info): Add c-tree.info. - + Sun Sep 24 09:15:48 2000 Richard Kenner * expr.c (store_field): If BITSIZE is negative, use size of type. @@ -2286,10 +2326,10 @@ Sat 23-Sep-2000 22:39:18 BST Neil Booth 2000-09-22 Brad Lucier Mark Mitchell - * toplev.c (warn_disabled_optimization): Declare new warning flag. - * flags.h (warn_disabled_optimization): Add it here. - * gcse.c (gcse_main): Add warning when disabled. - * invoke.texi: Document -Wdisabled-optimization. + * toplev.c (warn_disabled_optimization): Declare new warning flag. + * flags.h (warn_disabled_optimization): Add it here. + * gcse.c (gcse_main): Add warning when disabled. + * invoke.texi: Document -Wdisabled-optimization. 2000-09-21 Jason Merrill @@ -2324,7 +2364,7 @@ Thu 21-Sep-2000 18:19:05 BST Neil Booth ARM and THUMB modes. * config/mcore/mcore.c: Fix compile time warnings. - * config/mcore/mcore-protos.h: Fix compile time warnings. + * config/mcore/mcore-protos.h: Fix compile time warnings. 2000-09-20 J. David Anglin @@ -2408,7 +2448,7 @@ Tue 19-Sep-2000 22:38:57 BST Neil Booth Tue 19-Sep-2000 18:26:57 BST Neil Booth - * cppfiles.c (read_include_file): Take no special action for + * cppfiles.c (read_include_file): Take no special action for zero-length files. 2000-09-19 Bernd Schmidt diff --git a/gcc/Makefile.in b/gcc/Makefile.in index 380cfdfa18f..e24c83cb993 100644 --- a/gcc/Makefile.in +++ b/gcc/Makefile.in @@ -63,25 +63,40 @@ ALLOCA_FINISH = true # CFLAGS is for the user to override to, e.g., do a bootstrap with -O2. # BOOT_CFLAGS is the value of CFLAGS to pass to the stage2 and stage3 # compilations. -# WARN1_CFLAGS are the warning flags to use for most compilations in stage1. -# WARN2_CFLAGS are the warning flags to pass to stage2, stage3, etc. +# XCFLAGS is used for most compilations but not when using the GCC just built. +# TCFLAGS is used for compilations with the GCC just built. +# STAGE1_CFLAGS is set by configure on some targets. +XCFLAGS = +TCFLAGS = +BOOT_CFLAGS = -g -O2 +STAGE1_CFLAGS = -g @stage1_cflags@ +CFLAGS = $(STAGE1_CFLAGS) + # The warning flags are separate from BOOT_CFLAGS because people tend to # override optimization flags and we'd like them to still have warnings # turned on. These flags are also used to pass other stage dependent # flags from configure. The user is free to explicitly turn these flags # off if they wish. -# LOOSE_CFLAGS are the CFLAGS to use when compiling something which is only -# compiled with gcc, such as libgcc and the frontends other than C. -# XCFLAGS is used for most compilations but not when using the GCC just built. -# TCFLAGS is used for compilations with the GCC just built. -XCFLAGS = -TCFLAGS = -CFLAGS = -g -BOOT_CFLAGS = -O2 $(CFLAGS) -WARN1_CFLAGS = @stage1_warn_cflags@ -WARN2_CFLAGS = @stage2_warn_cflags@ -WARN_CFLAGS = $(WARN1_CFLAGS) -LOOSE_CFLAGS = `echo $(CFLAGS) $(WARN2_CFLAGS)|sed -e 's/-pedantic//g' -e 's/-Wtraditional//g'` +# LOOSE_WARN are the warning flags to use when compiling something +# which is only compiled with gcc, such as libgcc and the frontends +# other than C. +# STRICT_WARN and STRICT2_WARN are the additional warning flags to +# apply to the back end and the C front end, which may be compiled +# with other compilers. This is partially controlled by configure in +# stage1, as not all versions of gcc understand -Wno-long-long. +LOOSE_WARN = -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes +STRICT_WARN = -Wtraditional @strict1_warn@ +STRICT2_WARN = -Wtraditional -pedantic -Wno-long-long + +# This is how we control whether or not the additional warnings are applied. +.-warn = $(STRICT_WARN) +GCC_WARN_CFLAGS = $(LOOSE_WARN) $($(@D)-warn) + +# All warnings have to be shut off in stage1 if the compiler used then +# isn't gcc; configure determines that. WARN_CFLAGS will be either +# $(GCC_WARN_CFLAGS), or nothing. +WARN_CFLAGS = @warn_cflags@ + # These exists to be overridden by the x-* and t-* files, respectively. X_CFLAGS = T_CFLAGS = @@ -120,11 +135,15 @@ TEXI2DVI = texi2dvi # For GNUmake: let us decide what gets passed to recursive makes. MAKEOVERRIDES = @SET_MAKE@ +# Some compilers can't handle cc -c blah.c -o foo/blah.o. +# In stage2 and beyond, we force this to "-o $@" since we know we're using gcc. +OUTPUT_OPTION = @OUTPUT_OPTION@ -# Define this as & to perform parallel make on a Sequent. -# Note that this has some bugs, and it seems currently necessary -# to compile all the gen* files first by hand to avoid erroneous results. -P = +# This is where we get zlib from. zlibdir is -L../zlib and zlibinc is +# -I../zlib, unless we were configured with --with-system-zlib, in which +# case both are empty. +ZLIB = @zlibdir@ -lz +ZLIBINC = @zlibinc@ # How to invoke ranlib. RANLIB = ranlib @@ -173,7 +192,7 @@ GCC_FOR_TARGET = ./xgcc -B./ -B$(build_tooldir)/bin/ -isystem $(build_tooldir)/i # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET. # It omits XCFLAGS, and specifies -B./. # It also specifies -isystem ./include to find, e.g., stddef.h. -GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(LOOSE_CFLAGS) -isystem ./include $(TCFLAGS) +GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(LOOSE_WARN) -isystem ./include $(TCFLAGS) # Specify the abi to use when building the c++ runtime GXX_ABI_FLAG=@GXX_ABI_FLAG@ @@ -424,6 +443,10 @@ MAYBE_USE_COLLECT2 = @maybe_use_collect2@ # so don't override it here. USE_COLLECT2 = collect2$(exeext) +# configure sets this to 'libcpp.a' if cpplib is being merged into +# C-family front ends. +MAYBE_CPPLIB = @maybe_cpplib@ + # List of extra C and assembler files to add to libgcc1.a. # Assembler files should have names ending in `.asm'. LIB1FUNCS_EXTRA = @@ -574,7 +597,8 @@ INTERNAL_CFLAGS = $(CROSS) -DIN_GCC @extra_c_flags@ # This is the variable actually used when we compile. # If you change this line, you probably also need to change the definition # of HOST_CFLAGS in build-make to match. -ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) $(WARN_CFLAGS) $(XCFLAGS) @DEFS@ +ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) \ + $(CFLAGS) $(WARN_CFLAGS) $(XCFLAGS) @DEFS@ # Likewise. ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS) @@ -616,11 +640,14 @@ HOST_ERRORS = $(HOST_PREFIX)errors.o # Both . and srcdir are used, in that order, # so that tm.h and config.h will be found in the compilation # subdirectory rather than in the source directory. -INCLUDES = -I. -I$(srcdir) -I$(srcdir)/config -I$(srcdir)/../include +# -I$(@D) and -I$(srcdir)/$(@D) cause the subdirectory of the file +# currently being compiled, in both source trees, to be examined as well. +INCLUDES = -I. -I$(@D) -I$(srcdir) -I$(srcdir)/$(@D) \ + -I$(srcdir)/config -I$(srcdir)/../include # Always use -I$(srcdir)/config when compiling. .c.o: - $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $< + $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION) # This tells GNU make version 3 not to export all the variables # defined in this file into the environment. @@ -684,15 +711,12 @@ PREPEND_DOTDOT_TO_RELATIVE_PATHS = sed \ -e 's|%||g' SUBDIR_FLAGS_TO_PASS = $(ORDINARY_FLAGS_TO_PASS) \ "CC=`echo @quoted_cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`" -# Flags to pass when recursing into a frontend subdirectory. -LANG_FLAGS_TO_PASS = $(SUBDIR_FLAGS_TO_PASS) \ - "CFLAGS=$(LOOSE_CFLAGS)" # # Lists of files for various purposes. # Language-specific object files for C and Objective C. C_AND_OBJC_OBJS = c-errors.o c-lex.o c-pragma.o c-decl.o c-typeck.o \ - c-convert.o c-aux-info.o c-common.o c-semantics.o @extra_c_objs@ + c-convert.o c-aux-info.o c-common.o c-semantics.o $(MAYBE_CPPLIB) # Language-specific object files for C. C_OBJS = c-parse.o c-lang.o $(C_AND_OBJC_OBJS) @@ -838,7 +862,7 @@ Makefile: $(srcdir)/Makefile.in config.status $(srcdir)/version.c \ rm -f config.run $(srcdir)/configure: $(srcdir)/configure.in - cd $(srcdir); autoconf + (cd $(srcdir) && autoconf) gccbug: $(srcdir)/gccbug.in CONFIG_FILES=gccbug CONFIG_HEADERS= ./config.status @@ -857,7 +881,7 @@ mklibgcc: $(srcdir)/mklibgcc.in # ??? Newer versions have a maintainer mode that may be useful here. $(srcdir)/config.in: $(srcdir)/cstamp-h.in $(srcdir)/cstamp-h.in: $(srcdir)/configure.in $(srcdir)/acconfig.h - cd $(srcdir) && autoheader + (cd $(srcdir) && autoheader) @rm -f $(srcdir)/cstamp-h.in echo timestamp > $(srcdir)/cstamp-h.in auto-host.h: cstamp-h ; @true @@ -950,7 +974,7 @@ specs: xgcc$(exeext) gcc-cross: xgcc$(exeext) cp xgcc$(exeext) gcc-cross$(exeext) -cc1$(exeext): $(P) $(C_OBJS) $(BACKEND) $(LIBDEPS) +cc1$(exeext): $(C_OBJS) $(BACKEND) $(LIBDEPS) $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cc1$(exeext) \ $(C_OBJS) $(BACKEND) $(LIBS) @@ -1109,8 +1133,8 @@ c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h $(GGC_H) intl.h \ $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/c-parse.c $(srcdir)/c-parse.c: $(srcdir)/c-parse.y - cd $(srcdir); $(BISON) $(BISONFLAGS) -o c-p$$$$.c c-parse.y ; \ - mv -f c-p$$$$.c c-parse.c + (cd $(srcdir) && $(BISON) $(BISONFLAGS) -o c-p$$$$.c c-parse.y && \ + mv -f c-p$$$$.c c-parse.c) $(srcdir)/c-parse.y: c-parse.in echo '/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y sed -e "/^ifobjc$$/,/^end ifobjc$$/d" \ @@ -1158,13 +1182,15 @@ hash.o: hash.c hash.h system.h toplev.h vfprintf.o: $(srcdir)/../libiberty/vfprintf.c $(CONFIG_H) system.h rm -f vfprintf.c $(LN_S) $(srcdir)/../libiberty/vfprintf.c vfprintf.c - $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) vfprintf.c + $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ + vfprintf.c $(OUTPUT_OPTION) splay-tree.o: $(srcdir)/../libiberty/splay-tree.c \ $(srcdir)/../include/splay-tree.h $(srcdir)/../include/libiberty.h rm -f splay-tree.c $(LN_S) $(srcdir)/../libiberty/splay-tree.c splay-tree.c - $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) splay-tree.c + $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ + splay-tree.c $(OUTPUT_OPTION) underscore.c: s-under ; @true @@ -1242,7 +1268,8 @@ ggc-none.o: ggc-none.c $(CONFIG_H) $(RTL_H) $(GGC_H) obstack.o: $(srcdir)/../libiberty/obstack.c $(CONFIG_H) rm -f obstack.c $(LN_S) $(srcdir)/../libiberty/obstack.c obstack.c - $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) obstack.c + $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ + obstack.c $(OUTPUT_OPTION) prefix.o: prefix.c $(CONFIG_H) system.h Makefile prefix.h $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ @@ -1437,7 +1464,8 @@ dependence.o : dependence.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) \ $(out_object_file): $(out_file) $(CONFIG_H) $(TREE_H) $(GGC_H) \ $(RTL_H) $(REGS_H) hard-reg-set.h real.h insn-config.h conditions.h \ insn-flags.h output.h $(INSN_ATTR_H) insn-codes.h system.h toplev.h function.h - $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(out_file) + $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ + $(out_file) $(OUTPUT_OPTION) # Build auxiliary files that support ecoff format. mips-tfile: mips-tfile.o version.o $(LIBDEPS) @@ -1814,7 +1842,7 @@ PREPROCESSOR_DEFINES = \ LIBCPP_OBJS = cpplib.o cpplex.o cppmacro.o cppexp.o cppfiles.o \ cpphash.o cpperror.o cppinit.o cppdefault.o cppoutput.o \ - mkdeps.o prefix.o version.o mbchar.o @extra_cpp_objs@ + mkdeps.o prefix.o version.o mbchar.o LIBCPP_DEPS = cpplib.h cpphash.h intl.h system.h @@ -1859,8 +1887,8 @@ tradcpp.o: tradcpp.c $(CONFIG_H) system.h version.h cppdefault.h tradcif.o: $(srcdir)/tradcif.c $(CONFIG_H) system.h defaults.h $(srcdir)/tradcif.c: $(srcdir)/tradcif.y - cd $(srcdir); $(BISON) $(BISONFLAGS) -o tr$$$$.c tradcif.y ; \ - mv -f tr$$$$.c tradcif.c + (cd $(srcdir) && $(BISON) $(BISONFLAGS) -o tr$$$$.c tradcif.y && \ + mv -f tr$$$$.c tradcif.c) # Note for the stamp targets, we run the program `true' instead of # having an empty command (nothing following the semicolon). @@ -1879,13 +1907,13 @@ protoize.o: protoize.c $(srcdir)/../include/getopt.h $(CONFIG_H) system.h \ Makefile version.h $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ $(DRIVER_DEFINES) $(PREPROCESSOR_DEFINES) \ - $(srcdir)/protoize.c + $(srcdir)/protoize.c $(OUTPUT_OPTION) unprotoize.o: unprotoize.c protoize.c $(srcdir)/../include/getopt.h \ $(CONFIG_H) system.h Makefile version.h $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ $(DRIVER_DEFINES) $(PREPROCESSOR_DEFINES) \ - $(srcdir)/unprotoize.c + $(srcdir)/unprotoize.c $(OUTPUT_OPTION) # This info describes the target machine, so compile with GCC just built. SYSCALLS.c.X: $(srcdir)/sys-types.h $(srcdir)/sys-protos.h $(GCC_PASSES) \ @@ -1986,26 +2014,26 @@ fixinc.sh: $(FIXINCSRCDIR)/mkfixinc.sh $(FIXINCSRCDIR)/fixincl.c \ $(FIXINCSRCDIR)/procopen.c $(FIXINCSRCDIR)/gnu-regex.c \ $(FIXINCSRCDIR)/server.c $(FIXINCSRCDIR)/gnu-regex.h \ $(FIXINCSRCDIR)/server.h $(FIXINCSRCDIR)/inclhack.def specs.ready - MAKE="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc; pwd` ; \ + (MAKE="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc && pwd` ; \ CC="$(CC)"; CFLAGS="$(CFLAGS)"; LDFLAGS="$(LDFLAGS)"; \ export MAKE srcdir CC CFLAGS LDFLAGS; \ - cd ./fixinc; $(SHELL) $${srcdir}/mkfixinc.sh $(target) + cd ./fixinc && $(SHELL) $${srcdir}/mkfixinc.sh $(target)) # Build fixed copies of system files. stmp-fixinc: fixinc.sh gsyslimits.h rm -rf include; mkdir include -chmod a+rx include - TARGET_MACHINE=$(target); srcdir=`cd $(srcdir); pwd`; \ + (TARGET_MACHINE=$(target); srcdir=`cd $(srcdir); pwd`; \ INSTALL_ASSERT_H=$(INSTALL_ASSERT_H); SHELL=$(SHELL) ;\ export TARGET_MACHINE srcdir INSTALL_ASSERT_H SHELL ; \ - $(SHELL) ./fixinc.sh `pwd`/include $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS) - rm -f include/syslimits.h + $(SHELL) ./fixinc.sh `pwd`/include $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); \ + rm -f include/syslimits.h; \ if [ -f include/limits.h ]; then \ mv include/limits.h include/syslimits.h; \ else \ cp $(srcdir)/gsyslimits.h include/syslimits.h; \ - fi - chmod a+r include/syslimits.h + fi; \ + chmod a+r include/syslimits.h) # If $(SYSTEM_HEADER_DIR) is $(tooldir)/sys-include, and # that directory exists, then make sure that $(libsubdir) exists. # This is because cpp is compiled to find $(tooldir)/include via @@ -2136,8 +2164,8 @@ cpp.dvi: $(srcdir)/cpp.texi INSTALL: $(srcdir)/install1.texi $(srcdir)/install.texi - cd $(srcdir); $(MAKEINFO) -D INSTALLONLY \ - --no-split --no-headers -o INSTALL install1.texi + (cd $(srcdir) && $(MAKEINFO) -D INSTALLONLY \ + --no-split --no-headers -o INSTALL install1.texi) # # Deletion of files made during compilation. # There are four levels of this: @@ -2191,7 +2219,7 @@ mostlyclean: $(INTL_MOSTLYCLEAN) lang.mostlyclean # that don't exist in the distribution. INTL_CLEAN = intl.clean clean: mostlyclean $(INTL_CLEAN) lang.clean - -rm -f libgcc.a + -rm -f libgcc.a libgcc_s$(SHLIB_EXT) -rm -rf libgcc -rm -f *.dvi -rm -f */*.dvi @@ -2637,44 +2665,44 @@ testsuite/site.exp: site.exp cp site.exp testsuite/site.exp check-g++: testsuite/site.exp - -rootme=`pwd`; export rootme; \ + -(rootme=`pwd`; export rootme; \ srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \ cd testsuite; \ EXPECT=${EXPECT} ; export EXPECT ; \ if [ -f $${rootme}/../expect/expect ] ; then \ TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \ export TCL_LIBRARY ; fi ; \ - $(RUNTEST) --tool g++ $(RUNTESTFLAGS) + $(RUNTEST) --tool g++ $(RUNTESTFLAGS)) check-gcc: testsuite/site.exp - -rootme=`pwd`; export rootme; \ + -(rootme=`pwd`; export rootme; \ srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \ cd testsuite; \ EXPECT=${EXPECT} ; export EXPECT ; \ if [ -f $${rootme}/../expect/expect ] ; then \ TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \ export TCL_LIBRARY ; fi ; \ - $(RUNTEST) --tool gcc $(RUNTESTFLAGS) + $(RUNTEST) --tool gcc $(RUNTESTFLAGS)) check-g77: testsuite/site.exp - -rootme=`pwd`; export rootme; \ + -(rootme=`pwd`; export rootme; \ srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \ cd testsuite; \ EXPECT=${EXPECT} ; export EXPECT ; \ if [ -f $${rootme}/../expect/expect ] ; then \ TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \ export TCL_LIBRARY ; fi ; \ - $(RUNTEST) --tool g77 $(RUNTESTFLAGS) + $(RUNTEST) --tool g77 $(RUNTESTFLAGS)) check-objc: testsuite/site.exp - -rootme=`pwd`; export rootme; \ + -(rootme=`pwd`; export rootme; \ srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \ cd testsuite; \ EXPECT=${EXPECT} ; export EXPECT ; \ if [ -f $${rootme}/../expect/expect ] ; then \ TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \ export TCL_LIBRARY ; fi ; \ - $(RUNTEST) --tool objc $(RUNTESTFLAGS) + $(RUNTEST) --tool objc $(RUNTESTFLAGS)) check-po: if test -f cp/Makefile && test -f f/Makefile && \ @@ -2686,12 +2714,12 @@ check-po: # Update the tags table. TAGS: force - cd $(srcdir); \ + (cd $(srcdir); \ mkdir tmp-tags; \ mv -f c-parse.[ch] =*.[chy] tmp-tags; \ etags *.y *.h *.c; \ mv tmp-tags/* .; \ - rmdir tmp-tags + rmdir tmp-tags) # Create the distribution tar.gz file. dist: tmp-gcc.xtar @@ -2703,7 +2731,7 @@ tmp-gcc.xtar: distdir tar -chf tmp-gcc.xtar gcc-$(version) distdir-cvs: force - if [ -d $(srcdir)/CVS ]; then cd $(srcdir) && cvs -r update; fi + if [ -d $(srcdir)/CVS ]; then (cd $(srcdir) && cvs -r update); fi # This target exists to do the initial work before the language specific # stuff gets done. @@ -2766,7 +2794,7 @@ distdir-finish: # Get rid of everything we don't want in the distribution. We'd want # this to use Makefile.in, but it doesn't have the `lang.foo' targets # expanded. - cd gcc-$(version); make extraclean distdir-check VERSION_DEP= + (cd gcc-$(version) && make extraclean distdir-check VERSION_DEP=) distdir-check: ($(AWK) '/^[^#]/{print} /^#[A-Za-z]/{print substr($$1, 2)}' | sort) \ @@ -2796,6 +2824,18 @@ diff: # A list of files to be destroyed during "lean" builds. VOL_FILES=`echo $(BACKEND) $(OBJS) $(C_OBJS) $(LIBCPP_OBJS) *.c *.h gen*` +# Flags to pass to stage2 and later recursive makes. Note that the +# WARN_CFLAGS setting can't be to the expansion of GCC_WARN_CFLAGS in +# the context of the stage_x rule. +STAGE2_FLAGS_TO_PASS = \ + CFLAGS="$(BOOT_CFLAGS)" \ + LDFLAGS="$(BOOT_LDFLAGS)" \ + WARN_CFLAGS="\$$(GCC_WARN_CFLAGS)" \ + STRICT_WARN="$(STRICT2_WARN)" \ + libdir=$(libdir) \ + LANGUAGES="$(LANGUAGES)" \ + OUTPUT_OPTION="-o \$$@" + # Only build the C compiler for stage1, because that is the only one that # we can guarantee will build with the native compiler, and also it is the # only thing useful for building stage2. @@ -2813,25 +2853,31 @@ stage_b: stage_a # because alloca.o is newer, we permit these recursive makes to compile # alloca.o. Then cc1 is newer, so it won't have to be relinked. stage_c: stage_b - +$(MAKE) CC="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS="$(BOOT_CFLAGS)" WARN_CFLAGS="$(WARN2_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)" + +$(MAKE) CC="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" \ + STAGE_PREFIX=stage1/ \ + $(STAGE2_FLAGS_TO_PASS) touch stage_c stage_d: stage_c +$(MAKE) stage2 touch stage_d - + stage_e: stage_d - +$(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS="$(BOOT_CFLAGS)" WARN_CFLAGS="$(WARN2_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)" + +$(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" \ + STAGE_PREFIX=stage2/ \ + $(STAGE2_FLAGS_TO_PASS) touch stage_e # For bootstrap4: stage_f: stage_e - +$(MAKE) CC="stage3/xgcc$(exeext) -B$(build_tooldir)/bin/ -Bstage3/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage3/ LANGUAGES="$(LANGUAGES)" + +$(MAKE) CC="stage3/xgcc$(exeext) -B$(build_tooldir)/bin/ -Bstage3/" \ + STAGE_PREFIX=stage3/ \ + $(STAGE2_FLAGS_TO_PASS) touch stage_f # Additional steps for *-lean targets: clean_s1: stage_b - -cd stage1; rm -f $(VOL_FILES) + -(cd stage1 && rm -f $(VOL_FILES)) touch clean_s1 clean_s2: stage_d diff --git a/gcc/config.in b/gcc/config.in index ceb76f93b78..b2a09f6014b 100644 --- a/gcc/config.in +++ b/gcc/config.in @@ -320,8 +320,7 @@ every opportunity. This is extremely expensive. */ #undef ENABLE_GC_ALWAYS_COLLECT -/* Define if you want the preprocessor merged into the C and C++ compilers. - This mode is not ready for production use. */ +/* Define if you want the preprocessor merged into the C and C++ compilers. */ #undef USE_CPPLIB /* Define if you want the C and C++ compilers to support multibyte diff --git a/gcc/configure b/gcc/configure index 95ae6fb09a8..e214aea45e8 100755 --- a/gcc/configure +++ b/gcc/configure @@ -864,12 +864,12 @@ fi # Link cpplib into the compiler proper, for C/C++/ObjC. +maybe_cpplib= # Check whether --enable-c-cpplib or --disable-c-cpplib was given. if test "${enable_c_cpplib+set}" = set; then enableval="$enable_c_cpplib" if test x$enable_c_cpplib != xno; then - extra_c_objs="${extra_c_objs} libcpp.a" - extra_cxx_objs="${extra_cxx_objs} ../libcpp.a" + maybe_cpplib=libcpp.a cat >> confdefs.h <<\EOF #define USE_CPPLIB 1 EOF @@ -878,6 +878,7 @@ fi fi + # Enable Multibyte Characters for C/C++ # Check whether --enable-c-mbchar or --disable-c-mbchar was given. if test "${enable_c_mbchar+set}" = set; then @@ -1004,7 +1005,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1008: checking host system type" >&5 +echo "configure:1009: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1025,7 +1026,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1029: checking target system type" >&5 +echo "configure:1030: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1043,7 +1044,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1047: checking build system type" >&5 +echo "configure:1048: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1070,7 +1071,7 @@ test "$host_alias" != "$target_alias" && # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1074: checking for $ac_word" >&5 +echo "configure:1075: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1100,7 +1101,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1104: checking for $ac_word" >&5 +echo "configure:1105: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1151,7 +1152,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1155: checking for $ac_word" >&5 +echo "configure:1156: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1183,7 +1184,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1187: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1188: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1194,12 +1195,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1198 "configure" +#line 1199 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1203: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1204: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1225,12 +1226,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1229: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1230: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1234: checking whether we are using GNU C" >&5 +echo "configure:1235: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1239,7 +1240,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1243: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1244: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1258,7 +1259,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1262: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1263: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1291,10 +1292,10 @@ fi if test "x$CC" != xcc; then echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6 -echo "configure:1295: checking whether $CC and cc understand -c and -o together" >&5 +echo "configure:1296: checking whether $CC and cc understand -c and -o together" >&5 else echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6 -echo "configure:1298: checking whether cc understands -c and -o together" >&5 +echo "configure:1299: checking whether cc understands -c and -o together" >&5 fi set dummy $CC; ac_cc="`echo $2 | sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`" @@ -1306,16 +1307,16 @@ else # We do the test twice because some compilers refuse to overwrite an # existing .o file with -o, though they will create one. ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5' -if { (eval echo configure:1310: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } && - test -f conftest.o && { (eval echo configure:1311: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; +if { (eval echo configure:1311: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } && + test -f conftest.o && { (eval echo configure:1312: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; then eval ac_cv_prog_cc_${ac_cc}_c_o=yes if test "x$CC" != xcc; then # Test first that cc exists at all. - if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1316: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then + if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1317: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then ac_try='cc -c conftest.c -o conftest.o 1>&5' - if { (eval echo configure:1318: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } && - test -f conftest.o && { (eval echo configure:1319: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; + if { (eval echo configure:1319: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } && + test -f conftest.o && { (eval echo configure:1320: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; then # cc works too. : @@ -1341,13 +1342,17 @@ EOF fi +# autoconf is lame and doesn't give us any substitution variable for this. if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then NO_MINUS_C_MINUS_O=yes +else + OUTPUT_OPTION='-o $@' fi + echo $ac_n "checking for long double""... $ac_c" 1>&6 -echo "configure:1351: checking for long double" >&5 +echo "configure:1356: checking for long double" >&5 if eval "test \"`echo '$''{'gcc_cv_c_long_double'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1355,7 +1360,7 @@ else gcc_cv_c_long_double=yes else cat > conftest.$ac_ext <= sizeof(double)):; ; return 0; } EOF -if { (eval echo configure:1369: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1374: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* gcc_cv_c_long_double=yes else @@ -1388,21 +1393,21 @@ fi echo $ac_n "checking whether ${CC-cc} accepts -Wno-long-long""... $ac_c" 1>&6 -echo "configure:1392: checking whether ${CC-cc} accepts -Wno-long-long" >&5 +echo "configure:1397: checking whether ${CC-cc} accepts -Wno-long-long" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_no_long_long'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else save_CFLAGS="$CFLAGS" CFLAGS="-Wno-long-long" cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1411: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_prog_cc_no_long_long=yes else @@ -1416,37 +1421,37 @@ CFLAGS="$save_CFLAGS" fi echo "$ac_t""$ac_cv_prog_cc_no_long_long" 1>&6 +strict1_warn= +if test $ac_cv_prog_cc_no_long_long = yes; then + strict1_warn="-pedantic -Wno-long-long" +fi + # If the native compiler is GCC, we can enable warnings even in stage1. # That's useful for people building cross-compilers, or just running a # quick `make'. -stage1_warn_cflags=" -W -Wall -Wtraditional -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes" -stage2_warn_cflags="$stage1_warn_cflags -pedantic -Wno-long-long" -if test "x$GCC" = "xyes"; then - if test $ac_cv_prog_cc_no_long_long = yes; then - stage1_warn_cflags="$stage1_warn_cflags -pedantic -Wno-long-long" - fi -else - stage1_warn_cflags="" +warn_cflags= +if test "x$GCC" = "xyes"; then + warn_cflags='$(GCC_WARN_CFLAGS)' fi + # Stage specific cflags for build. +stage1_cflags= case $build in vax-*-*) if test x$GCC = xyes then - stage1_warn_cflags="$stage1_warn_cflags -Wa,-J" + stage1_cflags="-Wa,-J" else - stage1_warn_cflags="$stage1_warn_cflags -J" + stage1_cflags="-J" fi ;; esac - - echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:1450: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:1455: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1474,7 +1479,7 @@ fi echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6 -echo "configure:1478: checking whether a default assembler was specified" >&5 +echo "configure:1483: checking whether a default assembler was specified" >&5 if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then if test x"$gas_flag" = x"no"; then echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6 @@ -1486,7 +1491,7 @@ else fi echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6 -echo "configure:1490: checking whether a default linker was specified" >&5 +echo "configure:1495: checking whether a default linker was specified" >&5 if test x"${DEFAULT_LINKER+set}" = x"set"; then if test x"$gnu_ld_flag" = x"no"; then echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6 @@ -1498,12 +1503,12 @@ else fi echo $ac_n "checking for GNU C library""... $ac_c" 1>&6 -echo "configure:1502: checking for GNU C library" >&5 +echo "configure:1507: checking for GNU C library" >&5 if eval "test \"`echo '$''{'gcc_cv_glibc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { @@ -1513,7 +1518,7 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:1517: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1522: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* gcc_cv_glibc=yes else @@ -1534,21 +1539,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:1538: checking for inline" >&5 +echo "configure:1543: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1557: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1575,12 +1580,12 @@ esac # Find some useful tools -for ac_prog in gawk mawk nawk awk +for ac_prog in mawk gawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1584: checking for $ac_word" >&5 +echo "configure:1589: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1612,7 +1617,7 @@ done # Extract the first word of "flex", so it can be a program name with args. set dummy flex; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1616: checking for $ac_word" >&5 +echo "configure:1621: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1646,7 +1651,7 @@ then *) ac_lib=l ;; esac echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6 -echo "configure:1650: checking for yywrap in -l$ac_lib" >&5 +echo "configure:1655: checking for yywrap in -l$ac_lib" >&5 ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1654,7 +1659,7 @@ else ac_save_LIBS="$LIBS" LIBS="-l$ac_lib $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1674: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -1688,7 +1693,7 @@ fi fi echo $ac_n "checking whether ln works""... $ac_c" 1>&6 -echo "configure:1692: checking whether ln works" >&5 +echo "configure:1697: checking whether ln works" >&5 if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1720,7 +1725,7 @@ else fi echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:1724: checking whether ln -s works" >&5 +echo "configure:1729: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1752,19 +1757,19 @@ else fi echo $ac_n "checking for volatile""... $ac_c" 1>&6 -echo "configure:1756: checking for volatile" >&5 +echo "configure:1761: checking for volatile" >&5 if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1773: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* gcc_cv_c_volatile=yes else @@ -1787,7 +1792,7 @@ fi # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1791: checking for $ac_word" >&5 +echo "configure:1796: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1819,7 +1824,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1823: checking for $ac_word" >&5 +echo "configure:1828: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1860,7 +1865,7 @@ test -n "$YACC" || YACC="yacc" # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1864: checking for a BSD compatible install" >&5 +echo "configure:1869: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1911,7 +1916,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1915: checking how to run the C preprocessor" >&5 +echo "configure:1920: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1926,13 +1931,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1936: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1941: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1943,13 +1948,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1953: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1958: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1960,13 +1965,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1970: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1975: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1991,12 +1996,12 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:1995: checking for ANSI C header files" >&5 +echo "configure:2000: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -2004,7 +2009,7 @@ else #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2008: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2013: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2021,7 +2026,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -2039,7 +2044,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -2060,7 +2065,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -2071,7 +2076,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:2075: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2080: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -2095,12 +2100,12 @@ EOF fi echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6 -echo "configure:2099: checking whether time.h and sys/time.h may both be included" >&5 +echo "configure:2104: checking whether time.h and sys/time.h may both be included" >&5 if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -2109,7 +2114,7 @@ int main() { struct tm *tp; ; return 0; } EOF -if { (eval echo configure:2113: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2118: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_header_time=yes else @@ -2130,12 +2135,12 @@ EOF fi echo $ac_n "checking whether string.h and strings.h may both be included""... $ac_c" 1>&6 -echo "configure:2134: checking whether string.h and strings.h may both be included" >&5 +echo "configure:2139: checking whether string.h and strings.h may both be included" >&5 if eval "test \"`echo '$''{'gcc_cv_header_string'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -2143,7 +2148,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:2147: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2152: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* gcc_cv_header_string=yes else @@ -2164,12 +2169,12 @@ EOF fi echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6 -echo "configure:2168: checking for sys/wait.h that is POSIX.1 compatible" >&5 +echo "configure:2173: checking for sys/wait.h that is POSIX.1 compatible" >&5 if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -2185,7 +2190,7 @@ wait (&s); s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; ; return 0; } EOF -if { (eval echo configure:2189: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2194: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_header_sys_wait_h=yes else @@ -2212,17 +2217,17 @@ for ac_hdr in limits.h stddef.h string.h strings.h stdlib.h time.h \ do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2216: checking for $ac_hdr" >&5 +echo "configure:2221: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2226: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2231: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2252,17 +2257,17 @@ done # Check for thread headers. ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for thread.h""... $ac_c" 1>&6 -echo "configure:2256: checking for thread.h" >&5 +echo "configure:2261: checking for thread.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2266: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2271: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2286,17 +2291,17 @@ fi ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for pthread.h""... $ac_c" 1>&6 -echo "configure:2290: checking for pthread.h" >&5 +echo "configure:2295: checking for pthread.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2300: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2305: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2323,7 +2328,7 @@ fi # Extract the first word of "gnatbind", so it can be a program name with args. set dummy gnatbind; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2327: checking for $ac_word" >&5 +echo "configure:2332: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gnat'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2362,7 +2367,7 @@ else # Extract the first word of "makeinfo", so it can be a program name with args. set dummy makeinfo; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2366: checking for $ac_word" >&5 +echo "configure:2371: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2391,13 +2396,13 @@ fi if test -n "$MAKEINFO"; then # Found it, now check the version. echo $ac_n "checking for modern makeinfo""... $ac_c" 1>&6 -echo "configure:2395: checking for modern makeinfo" >&5 +echo "configure:2400: checking for modern makeinfo" >&5 if eval "test \"`echo '$''{'gcc_cv_prog_makeinfo_modern'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_prog_version=`$MAKEINFO --version 2>&1 | sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'` - echo "configure:2401: version of makeinfo is $ac_prog_version" >&5 + echo "configure:2406: version of makeinfo is $ac_prog_version" >&5 case $ac_prog_version in '') gcc_cv_prog_makeinfo_modern=no;; 3.1[2-9] | 3.[2-9][0-9] | 4.* | 1.6[89] | 1.7[0-9]) @@ -2430,12 +2435,12 @@ fi echo $ac_n "checking for preprocessor stringizing operator""... $ac_c" 1>&6 -echo "configure:2434: checking for preprocessor stringizing operator" >&5 +echo "configure:2439: checking for preprocessor stringizing operator" >&5 if eval "test \"`echo '$''{'ac_cv_c_stringize'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 # Use only if it exists, # doesn't clash with , and declares intmax_t. echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6 -echo "configure:2472: checking for inttypes.h" >&5 +echo "configure:2477: checking for inttypes.h" >&5 if eval "test \"`echo '$''{'gcc_cv_header_inttypes_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -2481,7 +2486,7 @@ int main() { intmax_t i = -1; ; return 0; } EOF -if { (eval echo configure:2485: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2490: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* gcc_cv_header_inttypes_h=yes else @@ -2506,7 +2511,7 @@ fi # be either signed or unsigned. # echo $ac_n "checking for unsigned enumerated bitfields""... $ac_c" 1>&6 -echo "configure:2510: checking for unsigned enumerated bitfields" >&5 +echo "configure:2515: checking for unsigned enumerated bitfields" >&5 if eval "test \"`echo '$''{'gcc_cv_enum_bf_unsigned'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2514,7 +2519,7 @@ else gcc_cv_enum_bf_unsigned=yes else cat > conftest.$ac_ext < enum t { BLAH = 128 } ; @@ -2527,7 +2532,7 @@ int main(void) } EOF -if { (eval echo configure:2531: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2536: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then gcc_cv_enum_bf_unsigned=yes else @@ -2555,12 +2560,12 @@ for ac_func in strtoul bsearch putenv popen bcopy bzero bcmp \ fputs_unlocked getrusage valloc iconv nl_langinfo do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2559: checking for $ac_func" >&5 +echo "configure:2564: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2609,12 +2614,12 @@ done echo $ac_n "checking for ssize_t""... $ac_c" 1>&6 -echo "configure:2613: checking for ssize_t" >&5 +echo "configure:2618: checking for ssize_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -2645,12 +2650,12 @@ fi # Try to determine the array type of the second argument of getgroups # for the target system (int or gid_t). echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6 -echo "configure:2649: checking for uid_t in sys/types.h" >&5 +echo "configure:2654: checking for uid_t in sys/types.h" >&5 if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF @@ -2679,7 +2684,7 @@ EOF fi echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6 -echo "configure:2683: checking type of array argument to getgroups" >&5 +echo "configure:2688: checking type of array argument to getgroups" >&5 if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2687,7 +2692,7 @@ else ac_cv_type_getgroups=cross else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2721: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_type_getgroups=gid_t else @@ -2726,7 +2731,7 @@ fi if test $ac_cv_type_getgroups = cross; then cat > conftest.$ac_ext < EOF @@ -2767,12 +2772,12 @@ fi echo $ac_n "checking for vprintf""... $ac_c" 1>&6 -echo "configure:2771: checking for vprintf" >&5 +echo "configure:2776: checking for vprintf" >&5 if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2804: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_vprintf=yes" else @@ -2819,12 +2824,12 @@ fi if test "$ac_cv_func_vprintf" != yes; then echo $ac_n "checking for _doprnt""... $ac_c" 1>&6 -echo "configure:2823: checking for _doprnt" >&5 +echo "configure:2828: checking for _doprnt" >&5 if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2856: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func__doprnt=yes" else @@ -2883,7 +2888,7 @@ fi echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6 -echo "configure:2887: checking whether the printf functions support %p" >&5 +echo "configure:2892: checking whether the printf functions support %p" >&5 if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2891,7 +2896,7 @@ else gcc_cv_func_printf_ptr=no else cat > conftest.$ac_ext < @@ -2904,7 +2909,7 @@ int main() return (p != q); } EOF -if { (eval echo configure:2908: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2913: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then gcc_cv_func_printf_ptr=yes else @@ -2937,12 +2942,12 @@ case "${host}" in ;; esac echo $ac_n "checking for pid_t""... $ac_c" 1>&6 -echo "configure:2941: checking for pid_t" >&5 +echo "configure:2946: checking for pid_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -2971,17 +2976,17 @@ fi ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for vfork.h""... $ac_c" 1>&6 -echo "configure:2975: checking for vfork.h" >&5 +echo "configure:2980: checking for vfork.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2985: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2990: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3006,18 +3011,18 @@ else fi echo $ac_n "checking for working vfork""... $ac_c" 1>&6 -echo "configure:3010: checking for working vfork" >&5 +echo "configure:3015: checking for working vfork" >&5 if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then echo $ac_n "checking for vfork""... $ac_c" 1>&6 -echo "configure:3016: checking for vfork" >&5 +echo "configure:3021: checking for vfork" >&5 if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_vfork=yes" else @@ -3062,7 +3067,7 @@ fi ac_cv_func_vfork_works=$ac_cv_func_vfork else cat > conftest.$ac_ext < @@ -3157,7 +3162,7 @@ main() { } } EOF -if { (eval echo configure:3161: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3166: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_vfork_works=yes else @@ -3183,17 +3188,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3187: checking for $ac_hdr" >&5 +echo "configure:3192: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3197: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3202: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3222,12 +3227,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3226: checking for $ac_func" >&5 +echo "configure:3231: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3259: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3275,7 +3280,7 @@ fi done echo $ac_n "checking for working mmap which provides zeroed pages anywhere""... $ac_c" 1>&6 -echo "configure:3279: checking for working mmap which provides zeroed pages anywhere" >&5 +echo "configure:3284: checking for working mmap which provides zeroed pages anywhere" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_anywhere'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3283,7 +3288,7 @@ else ac_cv_func_mmap_anywhere=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3375: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_anywhere=yes else @@ -3389,7 +3394,7 @@ EOF fi echo $ac_n "checking for working mmap of a file""... $ac_c" 1>&6 -echo "configure:3393: checking for working mmap of a file" >&5 +echo "configure:3398: checking for working mmap of a file" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_file'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3404,7 +3409,7 @@ if test "$cross_compiling" = yes; then ac_cv_func_mmap_file=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3450: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_file=yes else @@ -3474,12 +3479,12 @@ for ac_func in bcopy bzero bcmp \ do ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6 -echo "configure:3478: checking whether $ac_func is declared" >&5 +echo "configure:3483: checking whether $ac_func is declared" >&5 if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3499: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* eval "gcc_cv_have_decl_$ac_func=yes" else @@ -3595,12 +3600,12 @@ for ac_func in getrlimit setrlimit getrusage do ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6 -echo "configure:3599: checking whether $ac_func is declared" >&5 +echo "configure:3604: checking whether $ac_func is declared" >&5 if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3624: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* eval "gcc_cv_have_decl_$ac_func=yes" else @@ -3658,12 +3663,12 @@ CFLAGS="$saved_CFLAGS" # mkdir takes a single argument on some systems. echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6 -echo "configure:3662: checking if mkdir takes one argument" >&5 +echo "configure:3667: checking if mkdir takes one argument" >&5 if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < @@ -3680,7 +3685,7 @@ int main() { mkdir ("foo", 0); ; return 0; } EOF -if { (eval echo configure:3684: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3689: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* gcc_cv_mkdir_takes_one_arg=no else @@ -7202,7 +7207,7 @@ fi echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6 -echo "configure:7206: checking for strerror in -lcposix" >&5 +echo "configure:7211: checking for strerror in -lcposix" >&5 ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -7210,7 +7215,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lcposix $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:7230: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -7244,18 +7249,18 @@ fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:7248: checking for working const" >&5 +echo "configure:7253: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:7307: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -7319,12 +7324,12 @@ EOF fi echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:7323: checking for off_t" >&5 +echo "configure:7328: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -7352,12 +7357,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:7356: checking for size_t" >&5 +echo "configure:7361: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -7387,19 +7392,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:7391: checking for working alloca.h" >&5 +echo "configure:7396: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { -char *p = alloca(2 * sizeof(int)); +void *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:7403: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:7408: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -7420,12 +7425,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:7424: checking for alloca" >&5 +echo "configure:7429: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:7462: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -7485,12 +7490,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:7489: checking whether alloca needs Cray hooks" >&5 +echo "configure:7494: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:7519: checking for $ac_func" >&5 +echo "configure:7524: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:7552: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -7570,7 +7575,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:7574: checking stack direction for C alloca" >&5 +echo "configure:7579: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -7578,7 +7583,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:7606: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -7624,17 +7629,17 @@ unistd.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:7628: checking for $ac_hdr" >&5 +echo "configure:7633: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:7638: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:7643: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -7664,12 +7669,12 @@ done strdup __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:7668: checking for $ac_func" >&5 +echo "configure:7673: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:7701: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -7721,12 +7726,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:7725: checking for $ac_func" >&5 +echo "configure:7730: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:7758: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -7783,19 +7788,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:7787: checking for LC_MESSAGES" >&5 +echo "configure:7792: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:7799: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:7804: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -7816,7 +7821,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:7820: checking whether NLS is requested" >&5 +echo "configure:7825: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -7836,7 +7841,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:7840: checking whether included gettext is requested" >&5 +echo "configure:7845: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -7855,17 +7860,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:7859: checking for libintl.h" >&5 +echo "configure:7864: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:7869: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:7874: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -7882,19 +7887,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:7886: checking for gettext in libc" >&5 +echo "configure:7891: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:7898: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:7903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -7910,7 +7915,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:7914: checking for bindtextdomain in -lintl" >&5 +echo "configure:7919: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -7918,7 +7923,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:7938: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -7945,12 +7950,12 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:7949: checking for gettext in libintl" >&5 +echo "configure:7954: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6 -echo "configure:7954: checking for gettext in -lintl" >&5 +echo "configure:7959: checking for gettext in -lintl" >&5 ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -7958,7 +7963,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:7978: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -8008,7 +8013,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:8012: checking for $ac_word" >&5 +echo "configure:8017: checking for $ac_word" >&5 if eval "test \"`echo '$''{'gcc_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -8042,12 +8047,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:8046: checking for $ac_func" >&5 +echo "configure:8051: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:8079: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -8097,7 +8102,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:8101: checking for $ac_word" >&5 +echo "configure:8106: checking for $ac_word" >&5 if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -8133,7 +8138,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:8137: checking for $ac_word" >&5 +echo "configure:8142: checking for $ac_word" >&5 if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -8165,7 +8170,7 @@ else fi cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:8182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -8198,7 +8203,7 @@ fi if test "$CATOBJEXT" = "NONE"; then echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6 -echo "configure:8202: checking whether catgets can be used" >&5 +echo "configure:8207: checking whether catgets can be used" >&5 # Check whether --with-catgets or --without-catgets was given. if test "${with_catgets+set}" = set; then withval="$with_catgets" @@ -8211,7 +8216,7 @@ fi if test "$nls_cv_use_catgets" = "yes"; then echo $ac_n "checking for main in -li""... $ac_c" 1>&6 -echo "configure:8215: checking for main in -li" >&5 +echo "configure:8220: checking for main in -li" >&5 ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -8219,14 +8224,14 @@ else ac_save_LIBS="$LIBS" LIBS="-li $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:8235: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -8254,12 +8259,12 @@ else fi echo $ac_n "checking for catgets""... $ac_c" 1>&6 -echo "configure:8258: checking for catgets" >&5 +echo "configure:8263: checking for catgets" >&5 if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:8291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_catgets=yes" else @@ -8304,7 +8309,7 @@ EOF # Extract the first word of "gencat", so it can be a program name with args. set dummy gencat; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:8308: checking for $ac_word" >&5 +echo "configure:8313: checking for $ac_word" >&5 if eval "test \"`echo '$''{'gcc_cv_path_GENCAT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -8340,7 +8345,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:8344: checking for $ac_word" >&5 +echo "configure:8349: checking for $ac_word" >&5 if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -8377,7 +8382,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:8381: checking for $ac_word" >&5 +echo "configure:8386: checking for $ac_word" >&5 if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -8415,7 +8420,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:8419: checking for $ac_word" >&5 +echo "configure:8424: checking for $ac_word" >&5 if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -8473,7 +8478,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:8477: checking for $ac_word" >&5 +echo "configure:8482: checking for $ac_word" >&5 if eval "test \"`echo '$''{'gcc_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -8507,7 +8512,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:8511: checking for $ac_word" >&5 +echo "configure:8516: checking for $ac_word" >&5 if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -8546,7 +8551,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:8550: checking for $ac_word" >&5 +echo "configure:8555: checking for $ac_word" >&5 if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -8645,7 +8650,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:8649: checking for catalogs to be installed" >&5 +echo "configure:8654: checking for catalogs to be installed" >&5 if test "x$LINGUAS" = "x"; then LINGUAS=$ALL_LINGUAS else @@ -8677,17 +8682,17 @@ echo "configure:8649: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:8681: checking for linux/version.h" >&5 +echo "configure:8686: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:8691: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:8696: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -8762,7 +8767,7 @@ fi echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6 -echo "configure:8766: checking whether windows registry support is requested" >&5 +echo "configure:8771: checking whether windows registry support is requested" >&5 if test x$enable_win32_registry != xno; then cat >> confdefs.h <<\EOF #define ENABLE_WIN32_REGISTRY 1 @@ -8791,7 +8796,7 @@ esac if test x$enable_win32_registry != xno; then echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6 -echo "configure:8795: checking registry key on windows hosts" >&5 +echo "configure:8800: checking registry key on windows hosts" >&5 cat >> confdefs.h <&6 -echo "configure:8989: checking what assembler to use" >&5 +echo "configure:8994: checking what assembler to use" >&5 gcc_cv_as= gcc_cv_gas_major_version= gcc_cv_gas_minor_version= @@ -9070,7 +9075,7 @@ fi # Figure out what nm we will be using. echo $ac_n "checking what nm to use""... $ac_c" 1>&6 -echo "configure:9074: checking what nm to use" >&5 +echo "configure:9079: checking what nm to use" >&5 if test -x nm$host_exeext; then gcc_cv_nm=./nm$host_exeext elif test x$host = x$target; then @@ -9081,7 +9086,7 @@ echo "$ac_t""$gcc_cv_nm" 1>&6 # Figure out what assembler alignment features are present. echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6 -echo "configure:9085: checking assembler alignment features" >&5 +echo "configure:9090: checking assembler alignment features" >&5 gcc_cv_as_alignment_features= if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then # Gas version 2.6 and later support for .balign and .p2align. @@ -9129,7 +9134,7 @@ fi echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6 echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6 -echo "configure:9133: checking assembler subsection support" >&5 +echo "configure:9138: checking assembler subsection support" >&5 gcc_cv_as_subsections= if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then @@ -9169,7 +9174,7 @@ fi echo "$ac_t""$gcc_cv_as_subsections" 1>&6 echo $ac_n "checking assembler weak support""... $ac_c" 1>&6 -echo "configure:9173: checking assembler weak support" >&5 +echo "configure:9178: checking assembler weak support" >&5 gcc_cv_as_weak= if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 2 -o "$gcc_cv_gas_major_version" -gt 2; then @@ -9192,7 +9197,7 @@ fi echo "$ac_t""$gcc_cv_as_weak" 1>&6 echo $ac_n "checking assembler hidden support""... $ac_c" 1>&6 -echo "configure:9196: checking assembler hidden support" >&5 +echo "configure:9201: checking assembler hidden support" >&5 gcc_cv_as_hidden= if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 10 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then @@ -9218,7 +9223,7 @@ echo "$ac_t""$gcc_cv_as_hidden" 1>&6 case "$target" in sparc*-*-*) echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6 -echo "configure:9222: checking assembler .register pseudo-op support" >&5 +echo "configure:9227: checking assembler .register pseudo-op support" >&5 if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -9246,7 +9251,7 @@ EOF fi echo $ac_n "checking assembler supports -relax""... $ac_c" 1>&6 -echo "configure:9250: checking assembler supports -relax" >&5 +echo "configure:9255: checking assembler supports -relax" >&5 if eval "test \"`echo '$''{'gcc_cv_as_relax_opt'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -9276,7 +9281,7 @@ EOF case "$tm_file" in *64*) echo $ac_n "checking for 64 bit support in assembler ($gcc_cv_as)""... $ac_c" 1>&6 -echo "configure:9280: checking for 64 bit support in assembler ($gcc_cv_as)" >&5 +echo "configure:9285: checking for 64 bit support in assembler ($gcc_cv_as)" >&5 if eval "test \"`echo '$''{'gcc_cv_as_flags64'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -9321,7 +9326,7 @@ EOF if test "x$gcc_cv_as_flags64" != xno; then echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6 -echo "configure:9325: checking for assembler offsetable %lo() support" >&5 +echo "configure:9330: checking for assembler offsetable %lo() support" >&5 if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -9360,7 +9365,7 @@ EOF i[34567]86-*-*) echo $ac_n "checking assembler instructions""... $ac_c" 1>&6 -echo "configure:9364: checking assembler instructions" >&5 +echo "configure:9369: checking assembler instructions" >&5 gcc_cv_as_instructions= if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2; then @@ -9480,8 +9485,8 @@ fi echo "Using $GGC for garbage collection." # Use the system's zlib library. -zlibdir=-L../../zlib -zlibinc="-I\$(srcdir)/../../zlib" +zlibdir=-L../zlib +zlibinc="-I\$(srcdir)/../zlib" # Check whether --with-system-zlib or --without-system-zlib was given. if test "${with_system_zlib+set}" = set; then withval="$with_system_zlib" @@ -9510,7 +9515,7 @@ fi # Build a new-libstdc++ system (ie libstdc++-v3) echo $ac_n "checking for libstdc++ to install""... $ac_c" 1>&6 -echo "configure:9514: checking for libstdc++ to install" >&5 +echo "configure:9519: checking for libstdc++ to install" >&5 # Check whether --enable-libstdcxx-v3 or --disable-libstdcxx-v3 was given. if test "${enable_libstdcxx_v3+set}" = set; then enableval="$enable_libstdcxx_v3" @@ -9537,7 +9542,7 @@ EOF echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:9541: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:9546: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -9601,7 +9606,6 @@ all_lib2funcs= language_fragments="Make-lang" language_hooks="Make-hooks" -oldstyle_subdirs= for s in .. $subdirs do @@ -9621,7 +9625,7 @@ do echo "${srcdir}/$s/config-lang.in doesn't set \$language." 1>&2 exit 1 fi - all_lang_makefiles="$all_lang_makefiles ${srcdir}/$s/Make-lang.in ${srcdir}/$s/Makefile.in" + all_lang_makefiles="$all_lang_makefiles ${srcdir}/$s/Make-lang.in $outputs" all_languages="$all_languages $language" if test "x$boot_language" = xyes then @@ -9632,10 +9636,6 @@ do all_diff_excludes="$all_diff_excludes $diff_excludes" all_headers="$all_headers $headers" all_outputs="$all_outputs $outputs" - if test x$outputs = x - then - oldstyle_subdirs="$oldstyle_subdirs $s" - fi all_lib2funcs="$all_lib2funcs $lib2funcs" fi done @@ -9789,9 +9789,6 @@ ${CONFIG_SHELL-/bin/sh} $srcdir/configure.frag $srcdir "$subdirs" "$dep_host_xma - - - @@ -9964,6 +9961,7 @@ s%@includedir@%$includedir%g s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g +s%@maybe_cpplib@%$maybe_cpplib%g s%@enable_shared@%$enable_shared%g s%@host@%$host%g s%@host_alias@%$host_alias%g @@ -9982,8 +9980,10 @@ s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@CC@%$CC%g s%@NO_MINUS_C_MINUS_O@%$NO_MINUS_C_MINUS_O%g -s%@stage1_warn_cflags@%$stage1_warn_cflags%g -s%@stage2_warn_cflags@%$stage2_warn_cflags%g +s%@OUTPUT_OPTION@%$OUTPUT_OPTION%g +s%@strict1_warn@%$strict1_warn%g +s%@warn_cflags@%$warn_cflags%g +s%@stage1_cflags@%$stage1_cflags%g s%@SET_MAKE@%$SET_MAKE%g s%@AWK@%$AWK%g s%@LEX@%$LEX%g @@ -10062,9 +10062,6 @@ s%@cpp_install_dir@%$cpp_install_dir%g s%@dep_host_xmake_file@%$dep_host_xmake_file%g s%@dep_tmake_file@%$dep_tmake_file%g s%@extra_c_flags@%$extra_c_flags%g -s%@extra_c_objs@%$extra_c_objs%g -s%@extra_cpp_objs@%$extra_cpp_objs%g -s%@extra_cxx_objs@%$extra_cxx_objs%g s%@extra_headers_list@%$extra_headers_list%g s%@extra_objs@%$extra_objs%g s%@extra_parts@%$extra_parts%g @@ -10362,7 +10359,6 @@ target='${target}' target_alias='${target_alias}' srcdir='${srcdir}' subdirs='${subdirs}' -oldstyle_subdirs='${oldstyle_subdirs}' symbolic_link='${symbolic_link}' program_transform_set='${program_transform_set}' program_transform_name='${program_transform_name}' @@ -10394,7 +10390,6 @@ case "$CONFIG_FILES" in *po/Makefile.in*) sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile esac -. $srcdir/configure.lang case x$CONFIG_HEADERS in xauto-host.h:config.in) echo > cstamp-h ;; diff --git a/gcc/configure.in b/gcc/configure.in index b05d5b57ad0..0a1e5224c98 100644 --- a/gcc/configure.in +++ b/gcc/configure.in @@ -255,16 +255,16 @@ elif test x$withval != xno; then fi]) # Link cpplib into the compiler proper, for C/C++/ObjC. +maybe_cpplib= AC_ARG_ENABLE(c-cpplib, [ --enable-c-cpplib link cpplib directly into C and C++ compilers (HIGHLY EXPERIMENTAL).], if test x$enable_c_cpplib != xno; then - extra_c_objs="${extra_c_objs} libcpp.a" - extra_cxx_objs="${extra_cxx_objs} ../libcpp.a" + maybe_cpplib=libcpp.a AC_DEFINE(USE_CPPLIB, 1, - [Define if you want the preprocessor merged into the C and C++ compilers. - This mode is not ready for production use.]) + [Define if you want the preprocessor merged into the C and C++ compilers.]) fi) +AC_SUBST(maybe_cpplib) # Enable Multibyte Characters for C/C++ AC_ARG_ENABLE(c-mbchar, @@ -330,10 +330,14 @@ AC_CANONICAL_SYSTEM # Find the native compiler AC_PROG_CC AC_PROG_CC_C_O +# autoconf is lame and doesn't give us any substitution variable for this. if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then NO_MINUS_C_MINUS_O=yes +else + OUTPUT_OPTION='-o $@' fi AC_SUBST(NO_MINUS_C_MINUS_O) +AC_SUBST(OUTPUT_OPTION) gcc_AC_C_LONG_DOUBLE @@ -344,34 +348,34 @@ CFLAGS="-Wno-long-long" AC_TRY_COMPILE(,,ac_cv_prog_cc_no_long_long=yes, ac_cv_prog_cc_no_long_long=no) CFLAGS="$save_CFLAGS"]) +strict1_warn= +if test $ac_cv_prog_cc_no_long_long = yes; then + strict1_warn="-pedantic -Wno-long-long" +fi +AC_SUBST(strict1_warn) # If the native compiler is GCC, we can enable warnings even in stage1. # That's useful for people building cross-compilers, or just running a # quick `make'. -stage1_warn_cflags=" -W -Wall -Wtraditional -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes" -stage2_warn_cflags="$stage1_warn_cflags -pedantic -Wno-long-long" -if test "x$GCC" = "xyes"; then - if test $ac_cv_prog_cc_no_long_long = yes; then - stage1_warn_cflags="$stage1_warn_cflags -pedantic -Wno-long-long" - fi -else - stage1_warn_cflags="" +warn_cflags= +if test "x$GCC" = "xyes"; then + warn_cflags='$(GCC_WARN_CFLAGS)' fi +AC_SUBST(warn_cflags) # Stage specific cflags for build. +stage1_cflags= case $build in vax-*-*) if test x$GCC = xyes then - stage1_warn_cflags="$stage1_warn_cflags -Wa,-J" + stage1_cflags="-Wa,-J" else - stage1_warn_cflags="$stage1_warn_cflags -J" + stage1_cflags="-J" fi ;; esac - -AC_SUBST(stage1_warn_cflags) -AC_SUBST(stage2_warn_cflags) +AC_SUBST(stage1_cflags) AC_PROG_MAKE_SET @@ -4875,8 +4879,8 @@ AC_SUBST(GGC) echo "Using $GGC for garbage collection." # Use the system's zlib library. -zlibdir=-L../../zlib -zlibinc="-I\$(srcdir)/../../zlib" +zlibdir=-L../zlib +zlibinc="-I\$(srcdir)/../zlib" AC_ARG_WITH(system-zlib, [ --with-system-zlib use installed libz], zlibdir= @@ -4983,7 +4987,6 @@ all_lib2funcs= language_fragments="Make-lang" language_hooks="Make-hooks" -oldstyle_subdirs= for s in .. $subdirs do @@ -5003,7 +5006,7 @@ do echo "${srcdir}/$s/config-lang.in doesn't set \$language." 1>&2 exit 1 fi - all_lang_makefiles="$all_lang_makefiles ${srcdir}/$s/Make-lang.in ${srcdir}/$s/Makefile.in" + all_lang_makefiles="$all_lang_makefiles ${srcdir}/$s/Make-lang.in $outputs" all_languages="$all_languages $language" if test "x$boot_language" = xyes then @@ -5014,10 +5017,6 @@ do all_diff_excludes="$all_diff_excludes $diff_excludes" all_headers="$all_headers $headers" all_outputs="$all_outputs $outputs" - if test x$outputs = x - then - oldstyle_subdirs="$oldstyle_subdirs $s" - fi all_lib2funcs="$all_lib2funcs $lib2funcs" fi done @@ -5140,9 +5139,6 @@ AC_SUBST(cpp_install_dir) AC_SUBST(dep_host_xmake_file) AC_SUBST(dep_tmake_file) AC_SUBST(extra_c_flags) -AC_SUBST(extra_c_objs) -AC_SUBST(extra_cpp_objs) -AC_SUBST(extra_cxx_objs) AC_SUBST(extra_headers_list) AC_SUBST(extra_objs) AC_SUBST(extra_parts) @@ -5218,7 +5214,6 @@ fi # and configure language subdirectories AC_OUTPUT($all_outputs, [ -. $srcdir/configure.lang case x$CONFIG_HEADERS in xauto-host.h:config.in) echo > cstamp-h ;; @@ -5256,7 +5251,6 @@ target='${target}' target_alias='${target_alias}' srcdir='${srcdir}' subdirs='${subdirs}' -oldstyle_subdirs='${oldstyle_subdirs}' symbolic_link='${symbolic_link}' program_transform_set='${program_transform_set}' program_transform_name='${program_transform_name}' diff --git a/gcc/configure.lang b/gcc/configure.lang deleted file mode 100644 index d96b6d8d531..00000000000 --- a/gcc/configure.lang +++ /dev/null @@ -1,233 +0,0 @@ -# configure.lang for GNU CC -# This script is run by configure for configuration of language -# subdirectories which conform to the old GCC configure mechanism -# for such subdirectories. - -# Copyright (C) 1997, 1998 Free Software Foundation, Inc. - -#This file is part of GNU CC. - -#GNU CC is free software; you can redistribute it and/or modify -#it under the terms of the GNU General Public License as published by -#the Free Software Foundation; either version 2, or (at your option) -#any later version. - -#GNU CC is distributed in the hope that it will be useful, -#but WITHOUT ANY WARRANTY; without even the implied warranty of -#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#GNU General Public License for more details. - -#You should have received a copy of the GNU General Public License -#along with GNU CC; see the file COPYING. If not, write to -#the Free Software Foundation, 59 Temple Place - Suite 330, -#Boston, MA 02111-1307, USA. - -savesrcdir=$srcdir - -for subdir in . $oldstyle_subdirs -do - # We only want to do this in language subdirs, but we have to handle - # the case of $oldstyle_subdirs = "". - if [ $subdir = . ] - then - continue - fi - - oldsrcdir=$savesrcdir - - # Re-adjust the path - case $oldsrcdir in - /*) - srcdir=$oldsrcdir/$subdir - ;; - *) - oldsrcdir=../${oldsrcdir} - srcdir=$oldsrcdir/$subdir - ;; - esac - mainsrcdir=$oldsrcdir - STARTDIR=`pwd` - test -d $subdir || mkdir $subdir - cd $subdir - - # Create Makefile.tem from Makefile.in. - # Make it set VPATH if necessary so that the sources are found. - # Also change its value of srcdir. - # Also create a .gdbinit file which runs the one in srcdir - # and tells GDB to look there for source files. - case $srcdir in - . | ./$subdir | .././$subdir) - rm -f Makefile.tem - cp Makefile.in Makefile.tem - chmod +w Makefile.tem - ;; - *) - rm -f Makefile.tem - echo "VPATH = ${srcdir}" \ - | cat - ${srcdir}/Makefile.in \ - | sed "s@^srcdir = \.@srcdir = ${srcdir}@" > Makefile.tem - rm -f .gdbinit - echo "dir ." > .gdbinit - echo "dir ${srcdir}" >> .gdbinit - echo "dir ${mainsrcdir}" >> .gdbinit - if [ x$gdb_needs_out_file_path = xyes ] - then - echo "dir ${mainsrcdir}/config/"`dirname ${out_file}` >> .gdbinit - fi - echo "source ${mainsrcdir}/.gdbinit" >> .gdbinit - ;; - esac - - # Conditionalize the makefile for this host machine. - rm -f Makefile.xx Makefile.ll - merged_frags= - for f in .. ${host_xmake_file} - do - if [ -f ${mainsrcdir}/config/$f ] - then - cat ${mainsrcdir}/config/$f >> Makefile.ll - if [ x"${merged_frags}" != x ] - then - merged_frags="${merged_frags} and " - fi - merged_frags="${merged_frags}${f}" - fi - done - if [ x"${merged_frags}" != x ] - then - sed -e "/####host/ r Makefile.ll" Makefile.tem > Makefile.xx - echo "Merged ${merged_frags}." - rm -f Makefile.tem - mv Makefile.xx Makefile.tem - rm -f Makefile.ll - fi - - # Add a definition for MAKE if system wants one. - case "$SET_MAKE" in - ?*) - rm -f Makefile.xx - (echo "$SET_MAKE"; cat Makefile.tem) >Makefile.xx - rm -f Makefile.tem - mv Makefile.xx Makefile.tem - esac - - # Add a definition for INSTALL if system wants one. - # This substitutes for lots of x-* files. - if [ x$build_broken_install = x ] - then true - else - rm -f Makefile.xx - abssrcdir=`cd ${srcdir}; pwd` - sed "s|^INSTALL = .*|${INSTALL}|" Makefile.tem > Makefile.xx - rm -f Makefile.tem - mv Makefile.xx Makefile.tem - fi - - # If using -program-transform-name, override the installation names. - if [ "x${program_transform_set}" = "xyes" ] ; then - sed -e "s/^program_transform_name[ ]*=.*$/program_transform_name = -$program_transform_name/" \ - -e "s/^program_transform_cross_name[ -]*=.*$/program_transform_cross_name = $program_transform_name/" \ - Makefile.tem > Makefile.xx - rm -f Makefile.tem - mv Makefile.xx Makefile.tem - fi - - # Conditionalize the makefile for this target machine. - rm -f Makefile.xx Makefile.ll - merged_frags= - for f in .. ${tmake_file} - do - if [ -f ${mainsrcdir}/config/$f ] - then - cat ${mainsrcdir}/config/$f >> Makefile.ll - if [ x"${merged_frags}" != x ] - then - merged_frags="${merged_frags} and " - fi - merged_frags="${merged_frags}$f" - fi - done - if [ x"${merged_frags}" != x ] - then - sed -e "/####target/ r Makefile.ll" Makefile.tem > Makefile.xx - echo "Merged ${merged_frags}." - rm -f Makefile.tem - mv Makefile.xx Makefile.tem - rm -f Makefile.ll - fi - - # If the host supports - # symlinks, point stage[123] at ../stage[123] so bootstrapping and the - # installation procedure can still use CC="stage1/xgcc -Bstage1/". - # If the host doesn't support symlinks, FLAGS_TO_PASS has been - # modified to solve the problem there. - for t in stage1 stage2 stage3 stage4 include - do - rm -f $t - $symbolic_link ../$t $t 2>/dev/null - done - - # Remove all formfeeds, since some Makes get confused by them. - # Also arrange to give the variables `target', `target_alias', - # `host_xmake_file', `tmake_file', `prefix', `local_prefix', - # `exec_prefix', `INSTALL_HEADERS_DIR', `exeext' - # values in the Makefile from the values they have in this script. - rm -f Makefile.xx - # Create an empty Makefile.sed first, to work around a Nextstep 3.3 bug. - echo 's| ||' > Makefile.sed - rm Makefile.sed - echo 's| ||' > Makefile.sed - echo "s|^target=.*$|target=${target}|" >> Makefile.sed - echo "s|^target_alias=.*$|target_alias=${target_alias}|" >> Makefile.sed - echo "s|^xmake_file=.*$|xmake_file=${dep_host_xmake_file}|" >> Makefile.sed - echo "s|^tmake_file=.*$|tmake_file=${dep_tmake_file}|" >> Makefile.sed - echo "s|^version=.*$|version=${version}|" >> Makefile.sed - echo "s|^GCC_THREAD_FILE=.*$|GCC_THREAD_FILE=${thread_file}|" >> Makefile.sed - echo "s|^prefix[ ]*=.*|prefix = $prefix|" >> Makefile.sed - echo "s|^local_prefix[ ]*=.*|local_prefix = $local_prefix|" >> Makefile.sed - echo "s|^exec_prefix[ ]*=.*|exec_prefix = $exec_prefix|" >> Makefile.sed - echo "s|^INSTALL_HEADERS_DIR[ ]*=.*$|INSTALL_HEADERS_DIR = ${build_install_headers_dir}|" >> Makefile.sed - echo "s|^exeext[ ]*=.*$|exeext = ${build_exeext}|" >> Makefile.sed - sed -f Makefile.sed Makefile.tem > Makefile.xx - rm -f Makefile.tem Makefile.sed - mv Makefile.xx Makefile.tem - - # Install Makefile for real, after making final changes. - # Define macro CROSS_COMPILE in compilation - # if this is a cross-compiler. - # Also use all.cross instead of all.internal - # and add cross-make to Makefile. - if [ x$host != x$target ] - then - rm -f Makefile.xx - echo "CROSS=-DCROSS_COMPILE" > Makefile.xx - sed -e "/####cross/ r ${mainsrcdir}/cross-make" Makefile.tem >> Makefile.xx - rm -f Makefile.tem - mv Makefile.xx Makefile.tem - fi - - # When building gcc with a cross-compiler, we need to fix a few things. - # This must come after cross-make as we want all.build to override - # all.cross. - if [ x$build != x$host ] - then - rm -f Makefile.xx - echo "build= $build" > Makefile.xx - echo "host= $host" >> Makefile.xx - sed -e "s|objc-runtime$||" \ - -e "/####build/ r ${mainsrcdir}/build-make" Makefile.tem >> Makefile.xx - rm -f Makefile.tem - mv Makefile.xx Makefile.tem - fi - - rm -f Makefile - mv Makefile.tem Makefile - echo "Created \`$subdir/Makefile'." - - cd $STARTDIR -done # end of current-dir SUBDIRS loop - -# Restore this, remember we're invoked with `.'. -srcdir=$savesrcdir diff --git a/gcc/cp/ChangeLog b/gcc/cp/ChangeLog index 8e63deafb6d..7cd501f9541 100644 --- a/gcc/cp/ChangeLog +++ b/gcc/cp/ChangeLog @@ -1,3 +1,15 @@ +2000-10-27 Zack Weinberg + + * Make-lang.in: Move all build rules here from Makefile.in, + adapt to new context. Wrap all rules that change the current + directory in parentheses. Expunge all references to $(P). + When one command depends on another and they're run all at + once, use && to separate them, not ;. Add OUTPUT_OPTION to + all object-file generation rules. Delete obsolete variables. + + * Makefile.in: Delete. + * config-lang.in: Delete outputs= line. + 2000-10-26 Gabriel Dos Reis * error.c (dump_function_decl): Print no space between diff --git a/gcc/cp/Make-lang.in b/gcc/cp/Make-lang.in index 2e426b6c491..5e03947fb11 100644 --- a/gcc/cp/Make-lang.in +++ b/gcc/cp/Make-lang.in @@ -36,12 +36,6 @@ # - making any compiler driver (eg: g++) # - the compiler proper (eg: cc1plus) # - define the names for selecting the language in LANGUAGES. -# -# Extra flags to pass to recursive makes. -CXX_FLAGS_TO_PASS = \ - "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \ - "CXXFLAGS=$(CXXFLAGS)" \ - "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" # Actual names to use when installing a native compiler. CXX_INSTALL_NAME = `t='$(program_transform_name)'; echo c++ | sed $$t` @@ -56,12 +50,6 @@ DEMANGLER_CROSS_NAME = `t='$(program_transform_cross_name)'; echo c++filt | sed # The name to use for the demangler program. DEMANGLER_PROG = c++filt$(exeext) -# Extra code to include in libgcc2. -CXX_LIB2FUNCS = tinfo.o tinfo2.o new.o opnew.o opnewnt.o opvnew.o opvnewnt.o \ - opdel.o opdelnt.o opvdel.o opvdelnt.o exception.o vec.o -CXX_LIB2SRCS = $(srcdir)/cp/new.cc $(srcdir)/cp/new1.cc $(srcdir)/cp/new2.cc \ - $(srcdir)/cp/exception.cc $(srcdir)/cp/tinfo.cc \ - $(srcdir)/cp/tinfo2.cc $(srcdir)/cp/tinfo.h # # Define the names for selecting c++ in LANGUAGES. # Note that it would be nice to move the dependency on g++ @@ -76,12 +64,6 @@ g++spec.o: $(srcdir)/cp/g++spec.c system.h $(GCC_H) $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/cp/g++spec.c $(INTL_TARGETS): $(srcdir)/cp/parse.c -$(srcdir)/cp/parse.c: $(srcdir)/cp/parse.y - @cp_srcdir=`sed -n 's/^srcdir[ ]*=[ ]*//p' cp/Makefile` && \ - echo "cd cp && $(MAKE) $$cp_srcdir/parse.c" && \ - cd cp && \ - $(MAKE) $(LANG_FLAGS_TO_PASS) $(CXX_FLAGS_TO_PASS) \ - $$cp_srcdir/parse.c # Create the compiler driver for g++. GXX_OBJS = gcc.o g++spec.o intl.o prefix.o version.o @@ -94,6 +76,7 @@ g++-cross$(exeext): g++$(exeext) -rm -f g++-cross$(exeext) cp g++$(exeext) g++-cross$(exeext) +# The demangler. cxxmain.o: $(srcdir)/../libiberty/cplus-dem.c $(DEMANGLE_H) rm -f cxxmain.c $(LN_S) $(srcdir)/../libiberty/cplus-dem.c cxxmain.c @@ -105,24 +88,36 @@ $(DEMANGLER_PROG): cxxmain.o underscore.o $(LIBDEPS) $(CC) -o $@ $(ALL_CFLAGS) $(LDFLAGS) \ cxxmain.o underscore.o $(LIBS) -CXX_SRCS = $(srcdir)/cp/call.c $(srcdir)/cp/class.c $(srcdir)/cp/cp-tree.def \ - $(srcdir)/c-common.def \ - $(srcdir)/cp/cp-tree.h $(srcdir)/cp/cvt.c $(srcdir)/cp/decl.c \ - $(srcdir)/cp/decl.h $(srcdir)/cp/decl2.c $(srcdir)/cp/dump.c \ - $(srcdir)/cp/errfn.c $(srcdir)/cp/error.c $(srcdir)/cp/except.c \ - $(srcdir)/cp/expr.c $(srcdir)/cp/friend.c $(srcdir)/cp/init.c \ - $(srcdir)/cp/lex.c $(srcdir)/cp/lex.h \ - $(srcdir)/cp/mangle.c $(srcdir)/cp/method.c $(srcdir)/cp/optimize.c \ - $(srcdir)/cp/parse.y $(srcdir)/cp/pt.c $(srcdir)/cp/ptree.c \ - $(srcdir)/cp/repo.c $(srcdir)/cp/rtti.c $(srcdir)/cp/search.c \ - $(srcdir)/cp/semantics.c $(srcdir)/cp/spew.c $(srcdir)/cp/tree.c \ - $(srcdir)/cp/typeck.c $(srcdir)/cp/typeck2.c $(srcdir)/cp/xref.c - -cc1plus$(exeext): $(P) $(CXX_SRCS) $(LIBDEPS) $(BACKEND) c-common.o \ - c-pragma.o c-semantics.o c-lex.o $(srcdir)/cp/cp-tree.h $(srcdir)/cp/cp-tree.def \ - $(srcdir)/c-common.def $(srcdir)/cp/cfns.gperf hash.o \ - $(srcdir)/cp/operators.def - cd cp; $(MAKE) $(LANG_FLAGS_TO_PASS) $(CXX_FLAGS_TO_PASS) ../cc1plus$(exeext) +# The compiler itself. +# Shared with C front end: +CXX_C_OBJS = c-common.o c-pragma.o c-semantics.o c-lex.o + +# Language-specific object files. +CXX_OBJS = cp/call.o cp/decl.o cp/errfn.o cp/expr.o cp/pt.o cp/typeck2.o \ + cp/class.o cp/decl2.o cp/error.o cp/lex.o cp/parse.o cp/ptree.o cp/rtti.o \ + cp/spew.o cp/typeck.o cp/cvt.o cp/except.o cp/friend.o cp/init.o cp/method.o \ + cp/search.o cp/semantics.o cp/tree.o cp/xref.o cp/repo.o cp/dump.o \ + cp/optimize.o cp/mangle.o + +# Use loose warnings for this front end. +cp-warn = + +cc1plus$(exeext): $(CXX_OBJS) $(CXX_C_OBJS) $(BACKEND) \ + $(MAYBE_CPPLIB) $(LIBDEPS) + $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ \ + $(CXX_OBJS) $(CXX_C_OBJS) $(BACKEND) $(MAYBE_CPPLIB) $(LIBS) + +# Special build rules. +$(srcdir)/cp/cfns.h: $(srcdir)/cp/cfns.gperf + gperf -o -C -E -k '1-6,$$' -j1 -D -N 'libc_name_p' \ + $(srcdir)/cp/cfns.gperf > $(srcdir)/cp/cfns.h + +$(srcdir)/cp/parse.h $(srcdir)/cp/parse.c: $(srcdir)/cp/parse.y + @echo "Expect 33 shift/reduce conflicts and 58 reduce/reduce conflicts." + cd $(srcdir)/cp; $(BISON) $(BISONFLAGS) -d -o p$$$$.c parse.y ; \ + grep '^#define[ ]*YYEMPTY' p$$$$.c >> p$$$$.h ; \ + mv -f p$$$$.c parse.c ; mv -f p$$$$.h parse.h + # # Build hooks: @@ -214,10 +209,10 @@ c++.mostlyclean: c++.clean: c++.distclean: -rm -f cp/config.status cp/Makefile - -rm -f cp/parse.output + -rm -f $(srcdir)/cp/parse.output c++.extraclean: c++.maintainer-clean: - -rm -f cp/parse.c cp/parse.h + -rm -f $(srcdir)/cp/parse.c $(srcdir)/cp/parse.h # # Stage hooks: # The main makefile has already created stage?/cp. @@ -248,3 +243,51 @@ c++.distdir: ln $$file ../../tmp/cp/inc >/dev/null 2>&1 \ || cp $$file ../../tmp/cp/inc; \ done + +# +# .o: .h dependencies. +CXX_TREE_H = $(TREE_H) cp/cp-tree.h c-common.h cp/cp-tree.def c-common.def \ + function.h varray.h system.h $(CONFIG_H) \ + $(srcdir)/../include/hashtab.h $(srcdir)/../include/splay-tree.h + +cp/spew.o: cp/spew.c $(CXX_TREE_H) cp/parse.h flags.h cp/lex.h toplev.h +cp/lex.o: cp/lex.c $(CXX_TREE_H) cp/parse.h flags.h cp/lex.h c-pragma.h \ + toplev.h output.h mbchar.h $(GGC_H) input.h diagnostic.h cp/operators.def +cp/decl.o: cp/decl.c $(CXX_TREE_H) flags.h cp/lex.h cp/decl.h stack.h \ + output.h $(EXPR_H) except.h toplev.h hash.h $(GGC_H) $(RTL_H) cp/operators.def +cp/decl2.o: cp/decl2.c $(CXX_TREE_H) flags.h cp/lex.h cp/decl.h $(EXPR_H) \ + output.h except.h toplev.h dwarf2out.h dwarfout.h $(GGC_H) $(RTL_H) +cp/typeck2.o: cp/typeck2.c $(CXX_TREE_H) flags.h toplev.h output.h +cp/typeck.o: cp/typeck.c $(CXX_TREE_H) flags.h $(RTL_H) $(EXPR_H) toplev.h +cp/class.o: cp/class.c $(CXX_TREE_H) flags.h toplev.h $(RTL_H) +cp/call.o: cp/call.c $(CXX_TREE_H) flags.h toplev.h $(RTL_H) $(EXPR_H) $(GGC_H) +cp/friend.o: cp/friend.c $(CXX_TREE_H) flags.h $(RTL_H) toplev.h $(EXPR_H) +cp/init.o: cp/init.c $(CXX_TREE_H) flags.h $(RTL_H) $(EXPR_H) toplev.h \ + $(GGC_H) except.h +cp/method.o: cp/method.c $(CXX_TREE_H) toplev.h $(GGC_H) $(RTL_H) $(EXPR_H) +cp/cvt.o: cp/cvt.c $(CXX_TREE_H) cp/decl.h flags.h toplev.h convert.h +cp/search.o: cp/search.c $(CXX_TREE_H) stack.h flags.h toplev.h $(RTL_H) +cp/tree.o: cp/tree.c $(CXX_TREE_H) flags.h toplev.h $(GGC_H) $(RTL_H) \ + insn-config.h integrate.h +cp/ptree.o: cp/ptree.c $(CXX_TREE_H) system.h +cp/rtti.o: cp/rtti.c $(CXX_TREE_H) flags.h toplev.h defaults.h +cp/except.o: cp/except.c $(CXX_TREE_H) flags.h $(RTL_H) except.h toplev.h \ + cp/cfns.h $(EXPR_H) insn-flags.h cp/decl.h $(OBSTACK_H) +cp/expr.o: cp/expr.c $(CXX_TREE_H) $(RTL_H) flags.h $(EXPR_H) toplev.h except.h +cp/xref.o: cp/xref.c $(CXX_TREE_H) input.h toplev.h +cp/pt.o: cp/pt.c $(CXX_TREE_H) cp/decl.h cp/parse.h cp/lex.h toplev.h \ + $(GGC_H) $(RTL_H) except.h +cp/error.o: cp/error.c $(CXX_TREE_H) toplev.h diagnostic.h +cp/errfn.o: cp/errfn.c $(CXX_TREE_H) toplev.h +cp/repo.o: cp/repo.c $(CXX_TREE_H) toplev.h $(GGC_H) +cp/semantics.o: cp/semantics.c $(CXX_TREE_H) cp/lex.h except.h toplev.h \ + flags.h $(GGC_H) output.h $(RTL_H) $(TIMEVAR_H) +cp/dump.o: cp/dump.c $(CXX_TREE_H) +cp/optimize.o: cp/optimize.c $(CXX_TREE_H) rtl.h integrate.h insn-config.h \ + input.h +cp/mangle.o: cp/mangle.c $(CXX_TREE_H) toplev.h + +cp/parse.o: cp/parse.c $(CXX_TREE_H) flags.h cp/lex.h except.h output.h \ + system.h toplev.h $(GGC_H) + $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(BIG_SWITCHFLAG) \ + $(srcdir)/cp/parse.c $(OUTPUT_OPTION) diff --git a/gcc/cp/Makefile.in b/gcc/cp/Makefile.in deleted file mode 100644 index 999fbcea7f9..00000000000 --- a/gcc/cp/Makefile.in +++ /dev/null @@ -1,323 +0,0 @@ -# Makefile for GNU C++ compiler. -# Copyright (C) 1987, 1988, 1990, 1991, 1992, 1993, 1994, 1995, 1998, -# 1999, 2000 Free Software Foundation, Inc. - -#This file is part of GNU CC. - -#GNU CC is free software; you can redistribute it and/or modify -#it under the terms of the GNU General Public License as published by -#the Free Software Foundation; either version 2, or (at your option) -#any later version. - -#GNU CC is distributed in the hope that it will be useful, -#but WITHOUT ANY WARRANTY; without even the implied warranty of -#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#GNU General Public License for more details. - -#You should have received a copy of the GNU General Public License -#along with GNU CC; see the file COPYING. If not, write to -#the Free Software Foundation, 59 Temple Place - Suite 330, -#Boston, MA 02111-1307, USA. - -# The makefile built from this file lives in the language subdirectory. -# Its purpose is to provide support for: -# -# 1) recursion where necessary, and only then (building .o's), and -# 2) building and debugging cc1 from the language subdirectory, and -# 3) nothing else. -# -# The parent makefile handles all other chores, with help from the -# language makefile fragment, of course. -# -# The targets for external use are: -# all, TAGS, ???mostlyclean, ???clean. - -# Suppress smart makes who think they know how to automake Yacc files -.y.c: - -# It defines the c++ interface name. It should be changed when the -# c++ interface is changed. -INTERFACE = 2 - -# Variables that exist for you to override. -# See below for how to change them for certain systems. - -# Various ways of specifying flags for compilations: -# CFLAGS is for the user to override to, e.g., do a bootstrap with -O2. -# BOOT_CFLAGS is the value of CFLAGS to pass -# to the stage2 and stage3 compilations -# XCFLAGS is used for most compilations but not when using the GCC just built. -XCFLAGS = -CFLAGS = -g -BOOT_CFLAGS = -O $(CFLAGS) -# These exists to be overridden by the x-* and t-* files, respectively. -X_CFLAGS = -T_CFLAGS = - -X_CPPFLAGS = -T_CPPFLAGS = - -CC = @CC@ -BISON = `if [ -f ../../bison/bison ] ; then echo ../../bison/bison -L $(srcdir)/../../bison/ ; else echo bison ; fi` -BISONFLAGS = -LEX = `if [ -f ../../flex/flex ] ; then echo ../../flex/flex ; else echo flex ; fi` -LEXFLAGS = -AR = ar -AR_FLAGS = rc -SHELL = /bin/sh -MAKEINFO = makeinfo -TEXI2DVI = texi2dvi - -# Define this as & to perform parallel make on a Sequent. -# Note that this has some bugs, and it seems currently necessary -# to compile all the gen* files first by hand to avoid erroneous results. -P = - -# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET. -# It omits XCFLAGS, and specifies -B./. -# It also specifies -B$(tooldir)/ to find as and ld for a cross compiler. -GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) - -# Tools to use when building a cross-compiler. -# These are used because `configure' appends `cross-make' -# to the makefile when making a cross-compiler. - -# We don't use cross-make. Instead we use the tools -# from the build tree, if they are available. -# program_transform_name and objdir are set by configure.in. -program_transform_name = -objdir = . - -target=@target@ -xmake_file=@dep_host_xmake_file@ -tmake_file=@dep_tmake_file@ -#version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < $(srcdir)/version.c` -#mainversion=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c` - -# Directory where sources are, from where we are. -srcdir = @srcdir@ -VPATH = @srcdir@ - -# Additional system libraries to link with. -CLIB= - -# Top build directory, relative to here. -top_builddir = .. - -# Internationalization library. -INTLLIBS = @INTLLIBS@ - -# Choose the real default target. -ALL=all - -# End of variables for you to override. - -# Definition of `all' is here so that new rules inserted by sed -# do not specify the default target. -all: all.indirect - -# This tells GNU Make version 3 not to put all variables in the environment. -.NOEXPORT: - -# sed inserts variable overrides after the following line. -####target overrides -@target_overrides@ -####host overrides -@host_overrides@ -####cross overrides -@cross_defines@ -@cross_overrides@ -####build overrides -@build_overrides@ -# -# Now figure out from those variables how to compile and link. - -all.indirect: Makefile ../cc1plus$(exeext) - -# IN_GCC tells obstack.h that we are using gcc's file. -INTERNAL_CFLAGS = $(CROSS) -DIN_GCC @extra_c_flags@ - -# This is the variable actually used when we compile. -ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) $(XCFLAGS) -W -Wall - -# Likewise. -ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS) - -# This is where we get libiberty.a from. -LIBIBERTY = ../../libiberty/libiberty.a - -# How to link with both our special library facilities -# and the system's installed libraries. -LIBS = $(INTLLIBS) $(LIBIBERTY) $(CLIB) -LIBDEPS = $(INTLLIBS) $(LIBIBERTY) - -# Specify the directories to be searched for header files. -# Both . and srcdir are used, in that order, -# so that tm.h and config.h will be found in the compilation -# subdirectory rather than in the source directory. -INCLUDES = -I. -I.. -I$(srcdir) -I$(srcdir)/.. -I$(srcdir)/../config -I$(srcdir)/../../include - -# Always use -I$(srcdir)/config when compiling. -.c.o: - $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $< - -# The only suffixes we want for implicit rules are .c and .o. -.SUFFIXES: -.SUFFIXES: .c .o - -# This tells GNU make version 3 not to export all the variables -# defined in this file into the environment. -.NOEXPORT: -# -# Lists of files for various purposes. - -# Shared with C front end: -C_OBJS = ../c-common.o ../c-pragma.o ../c-semantics.o ../c-lex.o - -# Language-specific object files for g++ - -CXX_OBJS = call.o decl.o errfn.o expr.o pt.o typeck2.o \ - class.o decl2.o error.o lex.o parse.o ptree.o rtti.o spew.o typeck.o cvt.o \ - except.o friend.o init.o method.o search.o semantics.o tree.o xref.o \ - repo.o dump.o optimize.o mangle.o @extra_cxx_objs@ - -# Language-independent object files. -BACKEND = ../toplev.o ../libbackend.a - -compiler: ../cc1plus$(exeext) -../cc1plus$(exeext): $(P) $(CXX_OBJS) $(C_OBJS) $(BACKEND) $(LIBDEPS) - $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ \ - $(CXX_OBJS) $(C_OBJS) $(BACKEND) $(LIBS) - -Makefile: $(srcdir)/Makefile.in $(srcdir)/../configure - cd ..; $(SHELL) config.status - -native: config.status ../cc1plus$(exeext) -# -# Compiling object files from source files. - -# Note that dependencies on obstack.h are not written -# because that file is not part of GCC. - -# C++ language specific files. - -RTL_H = $(srcdir)/../rtl.h $(srcdir)/../rtl.def \ - $(srcdir)/../machmode.h $(srcdir)/../machmode.def -TREE_H = $(srcdir)/../tree.h $(srcdir)/../real.h $(srcdir)/../tree.def \ - $(srcdir)/../machmode.h $(srcdir)/../machmode.def -CXX_TREE_H = $(TREE_H) cp-tree.h $(srcdir)/../c-common.h cp-tree.def \ - $(srcdir)/../c-common.def $(srcdir)/../function.h $(srcdir)/../varray.h \ - $(srcdir)/../../include/splay-tree.h \ - $(srcdir)/../system.h $(CONFIG_H) $(HTAB_H) -PARSE_H = $(srcdir)/parse.h -PARSE_C = $(srcdir)/parse.c -EXPR_H = $(srcdir)/../expr.h ../insn-codes.h -GGC_H = $(srcdir)/../ggc.h $(srcdir)/../varray.h -HTAB_H = $(srcdir)/../../include/hashtab.h -TIMEVAR_H = $(srcdir)/../timevar.h $(srcdir)/../timevar.def - -parse.o : $(PARSE_C) $(CXX_TREE_H) $(srcdir)/../flags.h lex.h \ - $(srcdir)/../except.h $(srcdir)/../output.h $(srcdir)/../system.h \ - $(srcdir)/../toplev.h $(GGC_H) - $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(BIG_SWITCHFLAG) \ - `echo $(PARSE_C) | sed 's,^\./,,'` - -CONFLICTS = expect 33 shift/reduce conflicts and 58 reduce/reduce conflicts. -$(PARSE_H) $(PARSE_C) : $(srcdir)/parse.y - @echo $(CONFLICTS) - cd $(srcdir); $(BISON) $(BISONFLAGS) -d -o p$$$$.c parse.y ; \ - grep '^#define[ ]*YYEMPTY' p$$$$.c >> p$$$$.h ; \ - mv -f p$$$$.c parse.c ; mv -f p$$$$.h parse.h -#$(PARSE_C) $(PARSE_H) : stamp-parse ; @true -#stamp-parse: $(srcdir)/parse.y -# @echo $(CONFLICTS) -# $(BISON) $(BISONFLAGS) -d $(srcdir)/parse.y -# grep '^#define[ ]*YYEMPTY' y.tab.c >>y.tab.h -# $(SHELL) $(srcdir)/../move-if-change y.tab.c $(PARSE_C) -# $(SHELL) $(srcdir)/../move-if-change y.tab.h $(PARSE_H) -# cp $(PARSE_C) y.tab.c -# touch stamp-parse - -$(srcdir)/cfns.h: $(srcdir)/cfns.gperf - gperf -o -C -E -k '1-6,$$' -j1 -D -N 'libc_name_p' \ - $(srcdir)/cfns.gperf > $(srcdir)/cfns.h - -spew.o : spew.c $(CXX_TREE_H) $(PARSE_H) $(srcdir)/../flags.h \ - lex.h $(srcdir)/../toplev.h -lex.o : lex.c $(CXX_TREE_H) \ - $(PARSE_H) $(srcdir)/../flags.h lex.h \ - $(srcdir)/../c-pragma.h $(srcdir)/../toplev.h \ - $(srcdir)/../output.h $(srcdir)/../mbchar.h $(GGC_H) \ - $(srcdir)/../input.h $(srcdir)/../diagnostic.h operators.def -decl.o : decl.c $(CXX_TREE_H) $(srcdir)/../flags.h \ - lex.h decl.h $(srcdir)/../stack.h $(srcdir)/../output.h $(srcdir)/../expr.h \ - $(srcdir)/../except.h $(srcdir)/../toplev.h \ - $(srcdir)/../hash.h $(GGC_H) $(RTL_H) operators.def -decl2.o : decl2.c $(CXX_TREE_H) $(srcdir)/../flags.h \ - lex.h decl.h $(EXPR_H) $(srcdir)/../output.h $(srcdir)/../except.h \ - $(srcdir)/../toplev.h $(srcdir)/../dwarf2out.h $(srcdir)/../dwarfout.h \ - $(GGC_H) $(RTL_H) -typeck2.o : typeck2.c $(CXX_TREE_H) $(srcdir)/../flags.h \ - $(srcdir)/../toplev.h $(srcdir)/../output.h -typeck.o : typeck.c $(CXX_TREE_H) $(srcdir)/../flags.h $(RTL_H) \ - $(EXPR_H) $(srcdir)/../toplev.h -class.o : class.c $(CXX_TREE_H) $(srcdir)/../flags.h \ - $(srcdir)/../toplev.h $(RTL_H) -call.o : call.c $(CXX_TREE_H) $(srcdir)/../flags.h \ - $(srcdir)/../toplev.h $(RTL_H) $(EXPR_H) $(GGC_H) -friend.o : friend.c $(CXX_TREE_H) $(srcdir)/../flags.h $(RTL_H) \ - $(srcdir)/../toplev.h $(EXPR_H) -init.o : init.c $(CXX_TREE_H) $(srcdir)/../flags.h $(RTL_H) \ - $(EXPR_H) $(srcdir)/../toplev.h $(GGC_H) \ - $(srcdir)/../except.h -method.o : method.c $(CXX_TREE_H) \ - $(srcdir)/../toplev.h $(GGC_H) $(RTL_H) -cvt.o : cvt.c $(CXX_TREE_H) decl.h \ - $(srcdir)/../flags.h $(srcdir)/../toplev.h $(srcdir)/../convert.h -search.o : search.c $(CXX_TREE_H) $(srcdir)/../stack.h \ - $(srcdir)/../flags.h $(srcdir)/../toplev.h $(RTL_H) -tree.o : tree.c $(CXX_TREE_H) $(srcdir)/../flags.h \ - $(srcdir)/../toplev.h $(GGC_H) $(RTL_H) \ - ../insn-config.h $(srcdir)/../integrate.h -ptree.o : ptree.c $(CXX_TREE_H) $(srcdir)/../system.h -rtti.o : rtti.c $(CXX_TREE_H) $(srcdir)/../flags.h \ - $(srcdir)/../toplev.h $(srcdir)/../defaults.h -except.o : except.c $(CXX_TREE_H) $(srcdir)/../flags.h $(RTL_H) \ - $(srcdir)/../except.h $(srcdir)/../toplev.h cfns.h -expr.o : expr.c $(CXX_TREE_H) $(RTL_H) $(srcdir)/../flags.h \ - $(EXPR_H) $(srcdir)/../toplev.h $(srcdir)/../except.h -xref.o : xref.c $(CXX_TREE_H) $(srcdir)/../input.h \ - $(srcdir)/../toplev.h -pt.o : pt.c $(CXX_TREE_H) decl.h $(PARSE_H) lex.h \ - $(srcdir)/../toplev.h $(GGC_H) $(RTL_H) \ - $(srcdir)/../except.h -error.o : error.c $(CXX_TREE_H) \ - $(srcdir)/../toplev.h $(srcdir)/../diagnostic.h -errfn.o : errfn.c $(CXX_TREE_H) \ - $(srcdir)/../toplev.h -repo.o : repo.c $(CXX_TREE_H) \ - $(srcdir)/../toplev.h $(GGC_H) -semantics.o: semantics.c $(CXX_TREE_H) lex.h \ - $(srcdir)/../except.h $(srcdir)/../toplev.h \ - $(srcdir)/../flags.h $(GGC_H) \ - $(srcdir)/../output.h $(RTL_H) $(TIMEVAR_H) -dump.o: dump.c $(CXX_TREE_H) -optimize.o: optimize.c $(CXX_TREE_H) \ - $(srcdir)/../rtl.h $(srcdir)/../integrate.h ../insn-config.h \ - $(srcdir)/../input.h -mangle.o: mangle.c $(CXX_TREE_H) $(srcdir)/../toplev.h - -# -# These exist for maintenance purposes. - -# Update the tags table. -TAGS: force - cd $(srcdir) ; \ - etags *.c *.h ; \ - echo 'l' | tr 'l' '\f' >> TAGS ; \ - echo 'parse.y,0' >> TAGS ; \ - etags -a ../*.h ../*.c; - -.PHONY: TAGS - -force: diff --git a/gcc/cp/config-lang.in b/gcc/cp/config-lang.in index 5b334f148ef..58c40d70557 100644 --- a/gcc/cp/config-lang.in +++ b/gcc/cp/config-lang.in @@ -33,5 +33,3 @@ compilers="cc1plus\$(exeext)" stagestuff="g++\$(exeext) g++-cross\$(exeext) cc1plus\$(exeext)" diff_excludes="-x parse.c -x parse.h" - -outputs=cp/Makefile diff --git a/gcc/f/ChangeLog b/gcc/f/ChangeLog index e5a1e0648cf..ec1f2a81df8 100644 --- a/gcc/f/ChangeLog +++ b/gcc/f/ChangeLog @@ -1,3 +1,15 @@ +2000-10-27 Zack Weinberg + + * Make-lang.in: Move all build rules here from Makefile.in, + adapt to new context. Wrap all rules that change the current + directory in parentheses. Expunge all references to $(P). + When one command depends on another and they're run all at + once, use && to separate them, not ;. Add OUTPUT_OPTION to + all object-file generation rules. Delete obsolete variables. + + * Makefile.in: Delete. + * config-lang.in: Delete outputs= line. + Sat Oct 21 18:07:48 2000 Joseph S. Myers * Makefile.in, g77spec.c: Remove EGCS references in comments. diff --git a/gcc/f/Make-lang.in b/gcc/f/Make-lang.in index 33df575d7d7..832b85457f7 100644 --- a/gcc/f/Make-lang.in +++ b/gcc/f/Make-lang.in @@ -65,7 +65,8 @@ g77spec.o: $(srcdir)/f/g77spec.c $(srcdir)/f/version.h system.h $(GCC_H) *) rm -f lang-f77;; \ esac if [ -f lang-f77 ]; then \ - $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/f/g77spec.c; \ + $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ + $(srcdir)/f/g77spec.c $(OUTPUT_OPTION); \ else true; fi g77version.o: $(srcdir)/f/version.c @@ -75,7 +76,7 @@ g77version.o: $(srcdir)/f/version.c esac if [ -f lang-f77 ]; then \ $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -o g77version.o \ - $(srcdir)/f/version.c; \ + $(srcdir)/f/version.c $(OUTPUT_OPTION); \ else true; fi # Create the compiler driver for g77. @@ -93,105 +94,61 @@ g77-cross$(exeext): g77$(exeext) cp g77$(exeext) g77-cross$(exeext); \ else true; fi -F77_SRCS = \ - $(srcdir)/f/bad.c \ - $(srcdir)/f/bad.def \ - $(srcdir)/f/bad.h \ - $(srcdir)/f/bit.c \ - $(srcdir)/f/bit.h \ - $(srcdir)/f/bld-op.def \ - $(srcdir)/f/bld.c \ - $(srcdir)/f/bld.h \ - $(srcdir)/f/com-rt.def \ - $(srcdir)/f/com.c \ - $(srcdir)/f/com.h \ - $(srcdir)/f/data.c \ - $(srcdir)/f/data.h \ - $(srcdir)/f/equiv.c \ - $(srcdir)/f/equiv.h \ - $(srcdir)/f/expr.c \ - $(srcdir)/f/expr.h \ - $(srcdir)/f/fini.c \ - $(srcdir)/f/global.c \ - $(srcdir)/f/global.h \ - $(srcdir)/f/implic.c \ - $(srcdir)/f/implic.h \ - $(srcdir)/f/info-b.def \ - $(srcdir)/f/info-k.def \ - $(srcdir)/f/info-w.def \ - $(srcdir)/f/info.c \ - $(srcdir)/f/info.h \ - $(srcdir)/f/intrin.c \ - $(srcdir)/f/intrin.def \ - $(srcdir)/f/intrin.h \ - $(srcdir)/f/lab.c \ - $(srcdir)/f/lab.h \ - $(srcdir)/f/lex.c \ - $(srcdir)/f/lex.h \ - $(srcdir)/f/malloc.c \ - $(srcdir)/f/malloc.h \ - $(srcdir)/f/name.c \ - $(srcdir)/f/name.h \ - $(srcdir)/f/parse.c \ - $(srcdir)/f/proj.c \ - $(srcdir)/f/proj.h \ - $(srcdir)/f/src.c \ - $(srcdir)/f/src.h \ - $(srcdir)/f/st.c \ - $(srcdir)/f/st.h \ - $(srcdir)/f/sta.c \ - $(srcdir)/f/sta.h \ - $(srcdir)/f/stb.c \ - $(srcdir)/f/stb.h \ - $(srcdir)/f/stc.c \ - $(srcdir)/f/stc.h \ - $(srcdir)/f/std.c \ - $(srcdir)/f/std.h \ - $(srcdir)/f/ste.c \ - $(srcdir)/f/ste.h \ - $(srcdir)/f/storag.c \ - $(srcdir)/f/storag.h \ - $(srcdir)/f/stp.c \ - $(srcdir)/f/stp.h \ - $(srcdir)/f/str-1t.fin \ - $(srcdir)/f/str-2t.fin \ - $(srcdir)/f/str-fo.fin \ - $(srcdir)/f/str-io.fin \ - $(srcdir)/f/str-nq.fin \ - $(srcdir)/f/str-op.fin \ - $(srcdir)/f/str-ot.fin \ - $(srcdir)/f/str.c \ - $(srcdir)/f/str.h \ - $(srcdir)/f/sts.c \ - $(srcdir)/f/sts.h \ - $(srcdir)/f/stt.c \ - $(srcdir)/f/stt.h \ - $(srcdir)/f/stu.c \ - $(srcdir)/f/stu.h \ - $(srcdir)/f/stv.c \ - $(srcdir)/f/stv.h \ - $(srcdir)/f/stw.c \ - $(srcdir)/f/stw.h \ - $(srcdir)/f/symbol.c \ - $(srcdir)/f/symbol.def \ - $(srcdir)/f/symbol.h \ - $(srcdir)/f/target.c \ - $(srcdir)/f/target.h \ - $(srcdir)/f/top.c \ - $(srcdir)/f/top.h \ - $(srcdir)/f/type.c \ - $(srcdir)/f/type.h \ - $(srcdir)/f/version.c \ - $(srcdir)/f/version.h \ - $(srcdir)/f/where.c \ - $(srcdir)/f/where.h - -f771$(exeext): $(P) $(F77_SRCS) $(LIBDEPS) $(BACKEND) - touch lang-f77 - cd f; $(MAKE) $(LANG_FLAGS_TO_PASS) \ - HOST_CC="`case '$(HOST_CC)' in stage*) echo '$(HOST_CC)' | sed -e 's|stage|../stage|g';; *) echo '$(HOST_CC)';; esac`" \ - HOST_CFLAGS="$(HOST_CFLAGS)" HOST_CPPFLAGS="$(HOST_CPPFLAGS)" \ - ../f771$(exeext) +# The compiler itself. + +F77_OBJS = f/bad.o f/bit.o f/bld.o f/com.o f/data.o f/equiv.o f/expr.o \ + f/global.o f/implic.o f/info.o f/intrin.o f/lab.o f/lex.o f/malloc.o \ + f/name.o f/parse.o f/proj.o f/src.o f/st.o f/sta.o f/stb.o f/stc.o \ + f/std.o f/ste.o f/storag.o f/stp.o f/str.o f/sts.o f/stt.o f/stu.o \ + f/stv.o f/stw.o f/symbol.o f/target.o f/top.o f/type.o f/version.o f/where.o + +# Use loose warnings for this front end. +f-warn = + +f771$(exeext): $(F77_OBJS) $(BACKEND) $(LIBDEPS) + rm -f f771$(exeext) + $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(F77_OBJS) $(BACKEND) $(LIBS) + +# Keyword tables. +f/stamp-str: f/str-1t.h f/str-1t.j f/str-2t.h f/str-2t.j \ + f/str-fo.h f/str-fo.j f/str-io.h f/str-io.j f/str-nq.h f/str-nq.j \ + f/str-op.h f/str-op.j f/str-ot.h f/str-ot.j + touch f/stamp-str + +f/str-1t.h f/str-1t.j: f/fini$(build_exeext) f/str-1t.fin + ./f/fini$(build_exeext) $(srcdir)/f/str-1t.fin f/str-1t.j f/str-1t.h + +f/str-2t.h f/str-2t.j: f/fini$(build_exeext) f/str-2t.fin + ./f/fini$(build_exeext) $(srcdir)/f/str-2t.fin f/str-2t.j f/str-2t.h + +f/str-fo.h f/str-fo.j: f/fini$(build_exeext) f/str-fo.fin + ./f/fini$(build_exeext) $(srcdir)/f/str-fo.fin f/str-fo.j f/str-fo.h + +f/str-io.h f/str-io.j: f/fini$(build_exeext) f/str-io.fin + ./f/fini$(build_exeext) $(srcdir)/f/str-io.fin f/str-io.j f/str-io.h + +f/str-nq.h f/str-nq.j: f/fini$(build_exeext) f/str-nq.fin + ./f/fini$(build_exeext) $(srcdir)/f/str-nq.fin f/str-nq.j f/str-nq.h + +f/str-op.h f/str-op.j: f/fini$(build_exeext) f/str-op.fin + ./f/fini$(build_exeext) $(srcdir)/f/str-op.fin f/str-op.j f/str-op.h + +f/str-ot.h f/str-ot.j: f/fini$(build_exeext) f/str-ot.fin + ./f/fini$(build_exeext) $(srcdir)/f/str-ot.fin f/str-ot.j f/str-ot.h + +f/fini: f/fini.o f/proj-h.o + $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o f/fini$(build_exeext) \ + f/fini.o f/proj-h.o + +f/fini.o: + $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \ + `echo $(srcdir)/f/fini.c | sed 's,^\./,,'` -o $@ + +# Like proj.o, but depends on hconfig.h instead of config.h. +f/proj-h.o: f/proj.c f/proj.h $(HCONFIG_H) $(SYSTEM_H) $(ASSERT_H) $(GLIMITS_H) + $(HOST_CC) -c -DUSE_HCONFIG \ + $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \ + `echo $(srcdir)/f/proj.c | sed 's,^\./,,'` -o $@ # # Build hooks: @@ -256,7 +213,8 @@ f/g77.dvi: $(srcdir)/f/g77.texi $(srcdir)/f/bugs.texi \ # itself, which uses f/intrin.def; in fact, many bugs in f/intrin.def have # been found only upon reading the documentation that was automatically # produced from it. -$(srcdir)/f/intdoc.texi: f/intdoc.c f/intdoc.in f/ansify.c f/intrin.def f/intrin.h +$(srcdir)/f/intdoc.texi: f/intdoc.c f/intdoc.in f/ansify.c \ + f/intrin.def f/intrin.h case "$(LANGUAGES)" in \ *[fF]77*) touch lang-f77;; \ *) rm -f lang-f77;; \ @@ -264,7 +222,7 @@ $(srcdir)/f/intdoc.texi: f/intdoc.c f/intdoc.in f/ansify.c f/intrin.def f/intrin if [ -f lang-f77 ]; then \ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) $(INCLUDES) \ `echo $(srcdir)/f/ansify.c | sed 's,^\./,,'` -o f/ansify; \ - f/ansify < $(srcdir)/f/intdoc.in > f/intdoc.h0 $(srcdir)/f/intdoc.in; \ + f/ansify <$(srcdir)/f/intdoc.in >f/intdoc.h0 $(srcdir)/f/intdoc.in; \ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) $(INCLUDES) -I./f \ `echo $(srcdir)/f/intdoc.c | sed 's,^\./,,'` -o f/intdoc; \ f/intdoc > $(srcdir)/f/intdoc.texi; \ @@ -316,7 +274,7 @@ f77.install-common: installdirs echo ''; \ echo 'Warning: gcc no longer installs an f77 command.'; \ echo ' You must do so yourself. For more information,'; \ - echo ' read "Distributing Binaries" in the egcs g77 docs.'; \ + echo ' read "Distributing Binaries" in the g77 docs.'; \ echo ' (To turn off this warning, delete the file'; \ echo ' f77-install-ok in the source or build directory.)'; \ echo ''; \ @@ -447,3 +405,189 @@ f77.distdir: f77.rebuilt $(LN_S) $$file ../tmp/f; \ done; \ fi + +# +# .o: .h dependencies. + +f/ansify.o: f/ansify.c hconfig.h system.h +f/bad.o: f/bad.c f/proj.h $(CONFIG_H) system.h f/bad.h f/bad.def f/where.h \ + glimits.h f/top.h f/malloc.h flags.h f/com.h f/com-rt.def $(TREE_H) f/bld.h \ + f/bld-op.def f/bit.h f/info.h f/info-b.def f/info-k.def f/info-w.def \ + f/target.h f/lex.h f/type.h f/intrin.h f/intrin.def f/lab.h f/symbol.h \ + f/symbol.def f/equiv.h f/storag.h f/global.h f/name.h toplev.h +f/bit.o: f/bit.c f/proj.h $(CONFIG_H) system.h glimits.h f/bit.h \ + f/malloc.h +f/bld.o: f/bld.c f/proj.h $(CONFIG_H) system.h f/bld.h f/bld-op.def f/bit.h \ + f/malloc.h f/com.h f/com-rt.def $(TREE_H) f/info.h f/info-b.def f/info-k.def \ + f/info-w.def f/target.h f/bad.h f/bad.def f/where.h glimits.h f/top.h f/lex.h \ + f/type.h f/lab.h f/storag.h f/symbol.h f/symbol.def f/equiv.h f/global.h \ + f/name.h f/intrin.h f/intrin.def +f/com.o: f/com.c f/proj.h $(CONFIG_H) system.h flags.h $(RTL_H) $(TREE_H) \ + output.h convert.h f/com.h f/com-rt.def f/bld.h f/bld-op.def f/bit.h \ + f/malloc.h f/info.h f/info-b.def f/info-k.def f/info-w.def f/target.h f/bad.h \ + f/bad.def f/where.h glimits.h f/top.h f/lex.h f/type.h f/intrin.h \ + f/intrin.def f/lab.h f/symbol.h f/symbol.def f/equiv.h f/storag.h f/global.h \ + f/name.h f/expr.h f/implic.h f/src.h f/st.h $(GGC_H) toplev.h defaults.h +f/data.o: f/data.c f/proj.h $(CONFIG_H) system.h f/data.h f/bld.h f/bld-op.def \ + f/bit.h f/malloc.h f/com.h f/com-rt.def $(TREE_H) f/info.h f/info-b.def \ + f/info-k.def f/info-w.def f/target.h f/bad.h f/bad.def f/where.h glimits.h \ + f/top.h f/lex.h f/type.h f/lab.h f/storag.h f/symbol.h f/symbol.def f/equiv.h \ + f/global.h f/name.h f/intrin.h f/intrin.def f/expr.h f/st.h +f/equiv.o: f/equiv.c f/proj.h $(CONFIG_H) system.h f/equiv.h f/bld.h \ + f/bld-op.def f/bit.h f/malloc.h f/com.h f/com-rt.def $(TREE_H) f/info.h \ + f/info-b.def f/info-k.def f/info-w.def f/target.h f/bad.h f/bad.def f/where.h \ + glimits.h f/top.h f/lex.h f/type.h f/lab.h f/storag.h f/symbol.h f/symbol.def \ + f/global.h f/name.h f/intrin.h f/intrin.def f/data.h +f/expr.o: f/expr.c f/proj.h $(CONFIG_H) system.h f/expr.h f/bld.h f/bld-op.def \ + f/bit.h f/malloc.h f/com.h f/com-rt.def $(TREE_H) f/info.h f/info-b.def \ + f/info-k.def f/info-w.def f/target.h f/bad.h f/bad.def f/where.h glimits.h \ + f/top.h f/lex.h f/type.h f/lab.h f/storag.h f/symbol.h f/symbol.def f/equiv.h \ + f/global.h f/name.h f/intrin.h f/intrin.def f/implic.h f/src.h f/st.h \ + f/stamp-str +f/fini.o: f/fini.c f/proj.h hconfig.h system.h f/malloc.h +f/global.o: f/global.c f/proj.h $(CONFIG_H) system.h f/global.h f/info.h \ + f/info-b.def f/info-k.def f/info-w.def f/target.h $(TREE_H) f/bad.h f/bad.def \ + f/where.h glimits.h f/top.h f/malloc.h f/lex.h f/type.h f/name.h f/symbol.h \ + f/symbol.def f/bld.h f/bld-op.def f/bit.h f/com.h f/com-rt.def f/lab.h \ + f/storag.h f/intrin.h f/intrin.def f/equiv.h +f/implic.o: f/implic.c f/proj.h $(CONFIG_H) system.h f/implic.h f/info.h \ + f/info-b.def f/info-k.def f/info-w.def f/target.h $(TREE_H) f/bad.h f/bad.def \ + f/where.h glimits.h f/top.h f/malloc.h f/lex.h f/type.h f/symbol.h \ + f/symbol.def f/bld.h f/bld-op.def f/bit.h f/com.h f/com-rt.def f/lab.h \ + f/storag.h f/intrin.h f/intrin.def f/equiv.h f/global.h f/name.h f/src.h +f/info.o: f/info.c f/proj.h $(CONFIG_H) system.h f/info.h f/info-b.def \ + f/info-k.def f/info-w.def f/target.h $(TREE_H) f/bad.h f/bad.def f/where.h \ + glimits.h f/top.h f/malloc.h f/lex.h f/type.h +f/intdoc.o: f/intdoc.c hconfig.h system.h f/intrin.h f/intrin.def \ + f/intdoc.h0 f/intdoc.h0 +f/intrin.o: f/intrin.c f/proj.h $(CONFIG_H) system.h f/intrin.h \ + f/intrin.def f/bld.h f/bld-op.def f/bit.h f/malloc.h f/com.h f/com-rt.def \ + $(TREE_H) f/info.h f/info-b.def f/info-k.def f/info-w.def f/target.h f/bad.h \ + f/bad.def f/where.h glimits.h f/top.h f/lex.h f/type.h f/lab.h f/storag.h \ + f/symbol.h f/symbol.def f/equiv.h f/global.h f/name.h f/expr.h f/src.h +f/lab.o: f/lab.c f/proj.h $(CONFIG_H) system.h f/lab.h f/com.h f/com-rt.def \ + $(TREE_H) f/bld.h f/bld-op.def f/bit.h f/malloc.h f/info.h f/info-b.def \ + f/info-k.def f/info-w.def f/target.h f/bad.h f/bad.def f/where.h glimits.h \ + f/top.h f/lex.h f/type.h f/intrin.h f/intrin.def f/symbol.h f/symbol.def \ + f/equiv.h f/storag.h f/global.h f/name.h +f/lex.o: f/lex.c f/proj.h $(CONFIG_H) system.h f/top.h f/malloc.h f/where.h \ + glimits.h f/bad.h f/bad.def f/com.h f/com-rt.def $(TREE_H) f/bld.h \ + f/bld-op.def f/bit.h f/info.h f/info-b.def f/info-k.def f/info-w.def \ + f/target.h f/lex.h f/type.h f/intrin.h f/intrin.def f/lab.h f/symbol.h \ + f/symbol.def f/equiv.h f/storag.h f/global.h f/name.h f/src.h flags.h \ + input.h toplev.h output.h $(GGC_H) +f/malloc.o: f/malloc.c f/proj.h $(CONFIG_H) system.h f/malloc.h +f/name.o: f/name.c f/proj.h $(CONFIG_H) system.h f/bad.h f/bad.def f/where.h \ + glimits.h f/top.h f/malloc.h f/name.h f/global.h f/info.h f/info-b.def \ + f/info-k.def f/info-w.def f/target.h $(TREE_H) f/lex.h f/type.h f/symbol.h \ + f/symbol.def f/bld.h f/bld-op.def f/bit.h f/com.h f/com-rt.def f/lab.h \ + f/storag.h f/intrin.h f/intrin.def f/equiv.h f/src.h +f/parse.o: f/parse.c f/proj.h $(CONFIG_H) system.h f/top.h f/malloc.h \ + f/where.h glimits.h f/com.h f/com-rt.def $(TREE_H) f/bld.h f/bld-op.def \ + f/bit.h f/info.h f/info-b.def f/info-k.def f/info-w.def f/target.h f/bad.h \ + f/bad.def f/lex.h f/type.h f/intrin.h f/intrin.def f/lab.h f/symbol.h \ + f/symbol.def f/equiv.h f/storag.h f/global.h f/name.h f/version.h flags.h +f/proj.o: f/proj.c f/proj.h $(CONFIG_H) system.h glimits.h +f/src.o: f/src.c f/proj.h $(CONFIG_H) system.h f/src.h f/bad.h f/bad.def \ + f/where.h glimits.h f/top.h f/malloc.h +f/st.o: f/st.c f/proj.h $(CONFIG_H) system.h f/st.h f/bad.h f/bad.def \ + f/where.h glimits.h f/top.h f/malloc.h f/lex.h f/symbol.h f/symbol.def \ + f/bld.h f/bld-op.def f/bit.h f/com.h f/com-rt.def $(TREE_H) f/info.h \ + f/info-b.def f/info-k.def f/info-w.def f/target.h f/type.h f/lab.h \ + f/storag.h f/intrin.h f/intrin.def f/equiv.h f/global.h f/name.h f/sta.h \ + f/stamp-str f/stb.h f/expr.h f/stp.h f/stt.h f/stc.h f/std.h \ + f/stv.h f/stw.h f/ste.h f/sts.h f/stu.h +f/sta.o: f/sta.c f/proj.h $(CONFIG_H) system.h f/sta.h f/bad.h f/bad.def \ + f/where.h glimits.h f/top.h f/malloc.h f/lex.h f/stamp-str f/symbol.h \ + f/symbol.def f/bld.h f/bld-op.def f/bit.h f/com.h f/com-rt.def $(TREE_H) \ + f/info.h f/info-b.def f/info-k.def f/info-w.def f/target.h f/type.h f/lab.h \ + f/storag.h f/intrin.h f/intrin.def f/equiv.h f/global.h f/name.h f/implic.h \ + f/stb.h f/expr.h f/stp.h f/stt.h f/stc.h f/std.h f/stv.h f/stw.h +f/stb.o: f/stb.c f/proj.h $(CONFIG_H) system.h f/stb.h f/bad.h f/bad.def \ + f/where.h glimits.h f/top.h f/malloc.h f/expr.h f/bld.h f/bld-op.def f/bit.h \ + f/com.h f/com-rt.def $(TREE_H) f/info.h f/info-b.def f/info-k.def \ + f/info-w.def f/target.h f/lex.h f/type.h f/lab.h f/storag.h f/symbol.h \ + f/symbol.def f/equiv.h f/global.h f/name.h f/intrin.h f/intrin.def f/stp.h \ + f/stt.h f/stamp-str f/src.h f/sta.h f/stc.h +f/stc.o: f/stc.c f/proj.h $(CONFIG_H) system.h f/stc.h f/bad.h f/bad.def \ + f/where.h glimits.h f/top.h f/malloc.h f/bld.h f/bld-op.def f/bit.h f/com.h \ + f/com-rt.def $(TREE_H) f/info.h f/info-b.def f/info-k.def f/info-w.def \ + f/target.h f/lex.h f/type.h f/lab.h f/storag.h f/symbol.h f/symbol.def \ + f/equiv.h f/global.h f/name.h f/intrin.h f/intrin.def f/expr.h f/stp.h \ + f/stt.h f/stamp-str f/data.h f/implic.h f/src.h f/sta.h f/std.h f/stv.h f/stw.h +f/std.o: f/std.c f/proj.h $(CONFIG_H) system.h f/std.h f/bld.h f/bld-op.def \ + f/bit.h f/malloc.h f/com.h f/com-rt.def $(TREE_H) f/info.h f/info-b.def \ + f/info-k.def f/info-w.def f/target.h f/bad.h f/bad.def f/where.h glimits.h \ + f/top.h f/lex.h f/type.h f/lab.h f/storag.h f/symbol.h f/symbol.def f/equiv.h \ + f/global.h f/name.h f/intrin.h f/intrin.def f/stp.h f/stt.h f/stamp-str \ + f/stv.h f/stw.h f/sta.h f/ste.h f/sts.h +f/ste.o: f/ste.c f/proj.h $(CONFIG_H) system.h $(RTL_H) toplev.h f/ste.h \ + f/bld.h f/bld-op.def f/bit.h f/malloc.h f/com.h f/com-rt.def $(TREE_H) \ + f/info.h f/info-b.def f/info-k.def f/info-w.def f/target.h f/bad.h f/bad.def \ + f/where.h glimits.h f/top.h f/lex.h f/type.h f/lab.h f/storag.h f/symbol.h \ + f/symbol.def f/equiv.h f/global.h f/name.h f/intrin.h f/intrin.def f/stp.h \ + f/stt.h f/stamp-str f/sts.h f/stv.h f/stw.h f/expr.h f/sta.h $(GGC_H) +f/storag.o: f/storag.c f/proj.h $(CONFIG_H) system.h f/storag.h f/bld.h \ + f/bld-op.def f/bit.h f/malloc.h f/com.h f/com-rt.def $(TREE_H) \ + f/info.h f/info-b.def f/info-k.def f/info-w.def f/target.h f/bad.h \ + f/bad.def f/where.h glimits.h f/top.h f/lex.h f/type.h f/lab.h \ + f/symbol.h f/symbol.def f/equiv.h f/global.h f/name.h f/intrin.h \ + f/intrin.def f/data.h +f/stp.o: f/stp.c f/proj.h $(CONFIG_H) system.h f/stp.h f/bld.h f/bld-op.def \ + f/bit.h f/malloc.h f/com.h f/com-rt.def $(TREE_H) f/info.h \ + f/info-b.def f/info-k.def f/info-w.def f/target.h f/bad.h f/bad.def \ + f/where.h glimits.h f/top.h f/lex.h f/type.h f/lab.h f/storag.h \ + f/symbol.h f/symbol.def f/equiv.h f/global.h f/name.h f/intrin.h \ + f/intrin.def f/stt.h +f/str.o: f/str.c f/proj.h $(CONFIG_H) system.h f/src.h f/bad.h f/bad.def \ + f/where.h glimits.h f/top.h f/malloc.h f/stamp-str f/lex.h +f/sts.o: f/sts.c f/proj.h $(CONFIG_H) system.h f/sts.h f/malloc.h f/com.h \ + f/com-rt.def $(TREE_H) f/bld.h f/bld-op.def f/bit.h f/info.h \ + f/info-b.def f/info-k.def f/info-w.def f/target.h f/bad.h f/bad.def \ + f/where.h glimits.h f/top.h f/lex.h f/type.h f/intrin.h f/intrin.def \ + f/lab.h f/symbol.h f/symbol.def f/equiv.h f/storag.h f/global.h \ + f/name.h +f/stt.o: f/stt.c f/proj.h $(CONFIG_H) system.h f/stt.h f/top.h f/malloc.h \ + f/where.h glimits.h f/bld.h f/bld-op.def f/bit.h f/com.h f/com-rt.def \ + $(TREE_H) f/info.h f/info-b.def f/info-k.def f/info-w.def f/target.h \ + f/bad.h f/bad.def f/lex.h f/type.h f/lab.h f/storag.h f/symbol.h \ + f/symbol.def f/equiv.h f/global.h f/name.h f/intrin.h f/intrin.def \ + f/stp.h f/expr.h f/sta.h f/stamp-str +f/stu.o: f/stu.c f/proj.h $(CONFIG_H) system.h f/bld.h f/bld-op.def f/bit.h \ + f/malloc.h f/com.h f/com-rt.def $(TREE_H) f/info.h f/info-b.def \ + f/info-k.def f/info-w.def f/target.h f/bad.h f/bad.def f/where.h \ + glimits.h f/top.h f/lex.h f/type.h f/lab.h f/storag.h f/symbol.h \ + f/symbol.def f/equiv.h f/global.h f/name.h f/intrin.h f/intrin.def \ + f/implic.h f/stu.h f/sta.h f/stamp-str +f/stv.o: f/stv.c f/proj.h $(CONFIG_H) system.h f/stv.h f/lab.h f/com.h \ + f/com-rt.def $(TREE_H) f/bld.h f/bld-op.def f/bit.h f/malloc.h \ + f/info.h f/info-b.def f/info-k.def f/info-w.def f/target.h f/bad.h \ + f/bad.def f/where.h glimits.h f/top.h f/lex.h f/type.h f/intrin.h \ + f/intrin.def f/symbol.h f/symbol.def f/equiv.h f/storag.h f/global.h \ + f/name.h +f/stw.o: f/stw.c f/proj.h $(CONFIG_H) system.h f/stw.h f/bld.h f/bld-op.def \ + f/bit.h f/malloc.h f/com.h f/com-rt.def $(TREE_H) f/info.h \ + f/info-b.def f/info-k.def f/info-w.def f/target.h f/bad.h f/bad.def \ + f/where.h glimits.h f/top.h f/lex.h f/type.h f/lab.h f/storag.h \ + f/symbol.h f/symbol.def f/equiv.h f/global.h f/name.h f/intrin.h \ + f/intrin.def f/stv.h f/sta.h f/stamp-str +f/symbol.o: f/symbol.c f/proj.h $(CONFIG_H) system.h f/symbol.h \ + f/symbol.def f/bld.h f/bld-op.def f/bit.h f/malloc.h f/com.h \ + f/com-rt.def $(TREE_H) f/info.h f/info-b.def f/info-k.def \ + f/info-w.def f/target.h f/bad.h f/bad.def f/where.h glimits.h f/top.h \ + f/lex.h f/type.h f/lab.h f/storag.h f/intrin.h f/intrin.def f/equiv.h \ + f/global.h f/name.h f/src.h f/st.h +f/target.o: f/target.c f/proj.h $(CONFIG_H) system.h glimits.h f/target.h \ + $(TREE_H) f/bad.h f/bad.def f/where.h f/top.h f/malloc.h f/info.h \ + f/info-b.def f/info-k.def f/info-w.def f/type.h f/lex.h +f/top.o: f/top.c f/proj.h $(CONFIG_H) system.h f/top.h f/malloc.h f/where.h \ + glimits.h f/bad.h f/bad.def f/bit.h f/bld.h f/bld-op.def f/com.h \ + f/com-rt.def $(TREE_H) f/info.h f/info-b.def f/info-k.def \ + f/info-w.def f/target.h f/lex.h f/type.h f/lab.h f/storag.h \ + f/symbol.h f/symbol.def f/equiv.h f/global.h f/name.h f/intrin.h \ + f/intrin.def f/data.h f/expr.h f/implic.h f/src.h f/st.h flags.h \ + toplev.h +f/type.o: f/type.c f/proj.h $(CONFIG_H) system.h f/type.h f/malloc.h +f/version.o: f/version.c +f/where.o: f/where.c f/proj.h $(CONFIG_H) system.h f/where.h glimits.h f/top.h \ + f/malloc.h f/lex.h $(GGC_H) diff --git a/gcc/f/Makefile.in b/gcc/f/Makefile.in deleted file mode 100644 index fadbef7435f..00000000000 --- a/gcc/f/Makefile.in +++ /dev/null @@ -1,472 +0,0 @@ -# Makefile for GNU F77 compiler. -# Copyright (C) 1995, 1996, 1997, 1998, 2000 Free Software Foundation, Inc. - -#This file is part of GNU Fortran. - -#GNU Fortran is free software; you can redistribute it and/or modify -#it under the terms of the GNU General Public License as published by -#the Free Software Foundation; either version 2, or (at your option) -#any later version. - -#GNU Fortran is distributed in the hope that it will be useful, -#but WITHOUT ANY WARRANTY; without even the implied warranty of -#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#GNU General Public License for more details. - -#You should have received a copy of the GNU General Public License -#along with GNU Fortran; see the file COPYING. If not, write to -#the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA -#02111-1307, USA. - -# The makefile built from this file lives in the language subdirectory. -# Its purpose is to provide support for: -# -# 1) recursion where necessary, and only then (building .o's), and -# 2) building and debugging f771 from the language subdirectory, and -# 3) nothing else. -# -# The parent makefile handles all other chores, with help from the -# language makefile fragment, of course. -# -# The targets for external use are: -# all, TAGS, ???mostlyclean, ???clean. - -# Suppress smart makes who think they know how to automake Yacc files -.y.c: - -# Variables that exist for you to override. -# See below for how to change them for certain systems. - -# Various ways of specifying flags for compilations: -# CFLAGS is for the user to override to, e.g., do a bootstrap with -O2. -# BOOT_CFLAGS is the value of CFLAGS to pass -# to the stage2 and stage3 compilations -# XCFLAGS is used for most compilations but not when using the GCC just built. -XCFLAGS = -CFLAGS = -g -BOOT_CFLAGS = -O $(CFLAGS) -# These exists to be overridden by the x-* and t-* files, respectively. -X_CFLAGS = -T_CFLAGS = - -X_CPPFLAGS = -T_CPPFLAGS = - -CC = @CC@ -BISON = bison -BISONFLAGS = -LEX = flex -LEXFLAGS = -AR = ar -AR_FLAGS = rc -SHELL = /bin/sh -MAKEINFO = makeinfo -TEXI2DVI = texi2dvi - -# Define this as & to perform parallel make on a Sequent. -# Note that this has some bugs, and it seems currently necessary -# to compile all the gen* files first by hand to avoid erroneous results. -P = - -# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET. -# It omits XCFLAGS, and specifies -B./. -# It also specifies -B$(tooldir)/ to find as and ld for a cross compiler. -GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) - -# Tools to use when building a cross-compiler. -# These are used because `configure' appends `cross-make' -# to the makefile when making a cross-compiler. - -target=@target@ -xmake_file=@dep_host_xmake_file@ -tmake_file=@dep_tmake_file@ - -# Directory where sources are, from where we are. -srcdir = @srcdir@ -VPATH = @srcdir@ - -# Additional system libraries to link with. -CLIB= - -# Top build directory, relative to here. -top_builddir = .. - -# Internationalization library. -INTLLIBS = @INTLLIBS@ - -# Choose the real default target. -ALL=all - -# End of variables for you to override. - -# Definition of `all' is here so that new rules inserted by sed -# do not specify the default target. -all: all.indirect - -# This tells GNU Make version 3 not to put all variables in the environment. -.NOEXPORT: - -# sed inserts variable overrides after the following line. -####target overrides -@target_overrides@ -####host overrides -@host_overrides@ -####cross overrides -@cross_defines@ -@cross_overrides@ -####build overrides -@build_overrides@ -# -# Now figure out from those variables how to compile and link. - -all.indirect: Makefile ../f771$(exeext) - -# IN_GCC tells obstack.h that we are using gcc's file. -INTERNAL_CFLAGS = $(CROSS) -DIN_GCC @extra_c_flags@ - -# This is the variable actually used when we compile. -ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) $(XCFLAGS) -W -Wall - -# Likewise. -ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS) - -# This is where we get libiberty.a from. -LIBIBERTY = ../../libiberty/libiberty.a - -# We should be compiling with the built compiler, for which -# BOOT_LDFLAGS is appropriate. (Formerly we had a separate -# F771_LDFLAGS, but the ld flags can be taken care of by the target -# configuration files in GCC.) -LDFLAGS=$(BOOT_LDFLAGS) - -# How to link with both our special library facilities -# and the system's installed libraries. -LIBS = $(LIBIBERTY) $(CLIB) $(INTLLIBS) -LIBDEPS = $(INTLLIBS) $(LIBIBERTY) - -# Specify the directories to be searched for header files. -# Both . and srcdir are used, in that order, -# so that tm.h and config.h will be found in the compilation -# subdirectory rather than in the source directory. -INCLUDES = -I. -I.. -I$(srcdir) -I$(srcdir)/.. -I$(srcdir)/../config -I$(srcdir)/../../include - -# Always use -I$(srcdir)/config when compiling. -.c.o: - $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $< - -# -# Lists of files for various purposes. - -# Language-specific object files for g77 - -F77_OBJS = \ - bad.o \ - bit.o \ - bld.o \ - com.o \ - data.o \ - equiv.o \ - expr.o \ - global.o \ - implic.o \ - info.o \ - intrin.o \ - lab.o \ - lex.o \ - malloc.o \ - name.o \ - parse.o \ - proj.o \ - src.o \ - st.o \ - sta.o \ - stb.o \ - stc.o \ - std.o \ - ste.o \ - storag.o \ - stp.o \ - str.o \ - sts.o \ - stt.o \ - stu.o \ - stv.o \ - stw.o \ - symbol.o \ - target.o \ - top.o \ - type.o \ - version.o \ - where.o - -# Language-independent object files. -BACKEND = ../toplev.o ../libbackend.a - -compiler: ../f771$(exeext) -../f771$(exeext): $(P) $(F77_OBJS) $(BACKEND) $(LIBDEPS) - rm -f f771$(exeext) - $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(F77_OBJS) $(BACKEND) $(LIBS) - -Makefile: $(srcdir)/Makefile.in $(srcdir)/../configure - cd ..; $(SHELL) config.status - -native: config.status ../f771$(exeext) -# -# Compiling object files from source files. - -# Note that dependencies on obstack.h are not written -# because that file is not part of GCC. - -# F77 language-specific files. - -# These macros expand to the corresponding gcc-source files involved -# (each file itself, plus whatever files on which it depends, but -# without including stuff resulting from configuration, since we can't -# guess at that). The files that live in a distclean'd gcc source -# directory have "$(srcdir)/" prefixes, while the others don't because -# they'll be created only in the build directory. -ASSERT_H = $(srcdir)/../assert.h -CONFIG_H = ../config.h -CONVERT_H = $(srcdir)/../convert.h -FLAGS_H = $(srcdir)/../flags.h -GGC_H = $(srcdir)/../ggc.h $(srcdir)/../varray.h -GLIMITS_H = $(srcdir)/../glimits.h -HCONFIG_H = ../hconfig.h -INPUT_H = $(srcdir)/../input.h -OUTPUT_H = $(srcdir)/../output.h -RTL_H = $(srcdir)/../rtl.h $(srcdir)/../rtl.def \ - $(srcdir)/../machmode.h $(srcdir)/../machmode.def -SYSTEM_H = $(srcdir)/../system.h -TOPLEV_H = $(srcdir)/../toplev.h -TREE_H = $(srcdir)/../tree.h $(srcdir)/../real.h \ - $(srcdir)/../tree.def $(srcdir)/../machmode.h $(srcdir)/../machmode.def -DEFAULTS_H = $(srcdir)/../defaults.h - -ansify.o: ansify.c $(HCONFIG_H) $(SYSTEM_H) $(ASSERT_H) -bad.o: bad.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) bad.h bad.def where.h \ - $(GLIMITS_H) top.h malloc.h $(FLAGS_H) com.h com-rt.def $(TREE_H) bld.h \ - bld-op.def bit.h info.h info-b.def info-k.def info-w.def target.h \ - lex.h type.h intrin.h intrin.def lab.h symbol.h symbol.def equiv.h \ - storag.h global.h name.h $(TOPLEV_H) -bit.o: bit.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) $(GLIMITS_H) bit.h \ - malloc.h -bld.o: bld.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) bld.h bld-op.def bit.h \ - malloc.h com.h com-rt.def $(TREE_H) info.h info-b.def info-k.def \ - info-w.def target.h bad.h bad.def where.h $(GLIMITS_H) top.h lex.h \ - type.h lab.h storag.h symbol.h symbol.def equiv.h global.h name.h \ - intrin.h intrin.def -com.o: com.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) $(FLAGS_H) $(RTL_H) \ - $(TREE_H) $(OUTPUT_H) $(CONVERT_H) com.h com-rt.def bld.h bld-op.def bit.h \ - malloc.h info.h info-b.def info-k.def info-w.def target.h bad.h \ - bad.def where.h $(GLIMITS_H) top.h lex.h type.h intrin.h intrin.def \ - lab.h symbol.h symbol.def equiv.h storag.h global.h name.h expr.h \ - implic.h src.h st.h $(GGC_H) $(TOPLEV_H) $(DEFAULTS_H) -data.o: data.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) data.h bld.h \ - bld-op.def bit.h malloc.h com.h com-rt.def $(TREE_H) info.h info-b.def \ - info-k.def info-w.def target.h bad.h bad.def where.h $(GLIMITS_H) top.h \ - lex.h type.h lab.h storag.h symbol.h symbol.def equiv.h global.h \ - name.h intrin.h intrin.def expr.h st.h -equiv.o: equiv.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) equiv.h bld.h \ - bld-op.def bit.h malloc.h com.h com-rt.def $(TREE_H) info.h info-b.def \ - info-k.def info-w.def target.h bad.h bad.def where.h $(GLIMITS_H) top.h \ - lex.h type.h lab.h storag.h symbol.h symbol.def global.h name.h \ - intrin.h intrin.def data.h -expr.o: expr.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) expr.h bld.h \ - bld-op.def bit.h malloc.h com.h com-rt.def $(TREE_H) info.h info-b.def \ - info-k.def info-w.def target.h bad.h bad.def where.h $(GLIMITS_H) top.h \ - lex.h type.h lab.h storag.h symbol.h symbol.def equiv.h global.h \ - name.h intrin.h intrin.def implic.h src.h st.h stamp-str -fini.o: fini.c proj.h $(HCONFIG_H) $(SYSTEM_H) $(ASSERT_H) malloc.h -global.o: global.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) global.h info.h \ - info-b.def info-k.def info-w.def target.h $(TREE_H) bad.h bad.def \ - where.h $(GLIMITS_H) top.h malloc.h lex.h type.h name.h symbol.h \ - symbol.def bld.h bld-op.def bit.h com.h com-rt.def lab.h storag.h \ - intrin.h intrin.def equiv.h -implic.o: implic.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) implic.h info.h \ - info-b.def info-k.def info-w.def target.h $(TREE_H) bad.h bad.def \ - where.h $(GLIMITS_H) top.h malloc.h lex.h type.h symbol.h symbol.def \ - bld.h bld-op.def bit.h com.h com-rt.def lab.h storag.h intrin.h \ - intrin.def equiv.h global.h name.h src.h -info.o: info.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) info.h info-b.def \ - info-k.def info-w.def target.h $(TREE_H) bad.h bad.def where.h $(GLIMITS_H) \ - top.h malloc.h lex.h type.h -intdoc.o: intdoc.c $(HCONFIG_H) $(SYSTEM_H) $(ASSERT_H) intrin.h intrin.def \ - intdoc.h0 intdoc.h0 -intrin.o: intrin.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) intrin.h \ - intrin.def bld.h bld-op.def bit.h malloc.h com.h com-rt.def $(TREE_H) \ - info.h info-b.def info-k.def info-w.def target.h bad.h bad.def \ - where.h $(GLIMITS_H) top.h lex.h type.h lab.h storag.h symbol.h \ - symbol.def equiv.h global.h name.h expr.h src.h -lab.o: lab.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) lab.h com.h com-rt.def \ - $(TREE_H) bld.h bld-op.def bit.h malloc.h info.h info-b.def info-k.def \ - info-w.def target.h bad.h bad.def where.h $(GLIMITS_H) top.h lex.h \ - type.h intrin.h intrin.def symbol.h symbol.def equiv.h storag.h \ - global.h name.h -lex.o: lex.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) top.h malloc.h where.h \ - $(GLIMITS_H) bad.h bad.def com.h com-rt.def $(TREE_H) bld.h bld-op.def \ - bit.h info.h info-b.def info-k.def info-w.def target.h lex.h type.h \ - intrin.h intrin.def lab.h symbol.h symbol.def equiv.h storag.h \ - global.h name.h src.h $(FLAGS_H) $(INPUT_H) $(TOPLEV_H) $(OUTPUT_H) $(GGC_H) -malloc.o: malloc.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) malloc.h -name.o: name.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) bad.h bad.def where.h \ - $(GLIMITS_H) top.h malloc.h name.h global.h info.h info-b.def info-k.def \ - info-w.def target.h $(TREE_H) lex.h type.h symbol.h symbol.def bld.h \ - bld-op.def bit.h com.h com-rt.def lab.h storag.h intrin.h intrin.def \ - equiv.h src.h -parse.o: parse.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) top.h malloc.h \ - where.h $(GLIMITS_H) com.h com-rt.def $(TREE_H) bld.h bld-op.def bit.h \ - info.h info-b.def info-k.def info-w.def target.h bad.h bad.def lex.h \ - type.h intrin.h intrin.def lab.h symbol.h symbol.def equiv.h storag.h \ - global.h name.h version.h $(FLAGS_H) -proj.o: proj.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) $(GLIMITS_H) -src.o: src.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) src.h bad.h bad.def \ - where.h $(GLIMITS_H) top.h malloc.h -st.o: st.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) st.h bad.h bad.def \ - where.h $(GLIMITS_H) top.h malloc.h lex.h symbol.h symbol.def bld.h \ - bld-op.def bit.h com.h com-rt.def $(TREE_H) info.h info-b.def info-k.def \ - info-w.def target.h type.h lab.h storag.h intrin.h intrin.def equiv.h \ - global.h name.h sta.h stamp-str stb.h expr.h stp.h stt.h stc.h std.h \ - stv.h stw.h ste.h sts.h stu.h -sta.o: sta.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) sta.h bad.h bad.def \ - where.h $(GLIMITS_H) top.h malloc.h lex.h stamp-str symbol.h symbol.def \ - bld.h bld-op.def bit.h com.h com-rt.def $(TREE_H) info.h info-b.def \ - info-k.def info-w.def target.h type.h lab.h storag.h intrin.h \ - intrin.def equiv.h global.h name.h implic.h stb.h expr.h stp.h stt.h \ - stc.h std.h stv.h stw.h -stb.o: stb.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) stb.h bad.h bad.def \ - where.h $(GLIMITS_H) top.h malloc.h expr.h bld.h bld-op.def bit.h com.h \ - com-rt.def $(TREE_H) info.h info-b.def info-k.def info-w.def target.h \ - lex.h type.h lab.h storag.h symbol.h symbol.def equiv.h global.h \ - name.h intrin.h intrin.def stp.h stt.h stamp-str src.h sta.h stc.h -stc.o: stc.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) stc.h bad.h bad.def \ - where.h $(GLIMITS_H) top.h malloc.h bld.h bld-op.def bit.h com.h \ - com-rt.def $(TREE_H) info.h info-b.def info-k.def info-w.def target.h \ - lex.h type.h lab.h storag.h symbol.h symbol.def equiv.h global.h \ - name.h intrin.h intrin.def expr.h stp.h stt.h stamp-str data.h implic.h \ - src.h sta.h std.h stv.h stw.h -std.o: std.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) std.h bld.h bld-op.def \ - bit.h malloc.h com.h com-rt.def $(TREE_H) info.h info-b.def info-k.def \ - info-w.def target.h bad.h bad.def where.h $(GLIMITS_H) top.h lex.h \ - type.h lab.h storag.h symbol.h symbol.def equiv.h global.h name.h \ - intrin.h intrin.def stp.h stt.h stamp-str stv.h stw.h sta.h ste.h sts.h -ste.o: ste.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) $(RTL_H) $(TOPLEV_H) ste.h \ - bld.h bld-op.def bit.h malloc.h com.h com-rt.def $(TREE_H) info.h \ - info-b.def info-k.def info-w.def target.h bad.h bad.def where.h \ - $(GLIMITS_H) top.h lex.h type.h lab.h storag.h symbol.h symbol.def \ - equiv.h global.h name.h intrin.h intrin.def stp.h stt.h stamp-str sts.h \ - stv.h stw.h expr.h sta.h $(GGC_H) -storag.o: storag.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) storag.h bld.h \ - bld-op.def bit.h malloc.h com.h com-rt.def $(TREE_H) info.h info-b.def \ - info-k.def info-w.def target.h bad.h bad.def where.h $(GLIMITS_H) top.h \ - lex.h type.h lab.h symbol.h symbol.def equiv.h global.h name.h \ - intrin.h intrin.def data.h -stp.o: stp.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) stp.h bld.h bld-op.def \ - bit.h malloc.h com.h com-rt.def $(TREE_H) info.h info-b.def info-k.def \ - info-w.def target.h bad.h bad.def where.h $(GLIMITS_H) top.h lex.h \ - type.h lab.h storag.h symbol.h symbol.def equiv.h global.h name.h \ - intrin.h intrin.def stt.h -str.o: str.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) src.h bad.h bad.def \ - where.h $(GLIMITS_H) top.h malloc.h stamp-str lex.h -sts.o: sts.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) sts.h malloc.h com.h \ - com-rt.def $(TREE_H) bld.h bld-op.def bit.h info.h info-b.def info-k.def \ - info-w.def target.h bad.h bad.def where.h $(GLIMITS_H) top.h lex.h \ - type.h intrin.h intrin.def lab.h symbol.h symbol.def equiv.h storag.h \ - global.h name.h -stt.o: stt.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) stt.h top.h malloc.h \ - where.h $(GLIMITS_H) bld.h bld-op.def bit.h com.h com-rt.def $(TREE_H) \ - info.h info-b.def info-k.def info-w.def target.h bad.h bad.def lex.h \ - type.h lab.h storag.h symbol.h symbol.def equiv.h global.h name.h \ - intrin.h intrin.def stp.h expr.h sta.h stamp-str -stu.o: stu.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) bld.h bld-op.def bit.h \ - malloc.h com.h com-rt.def $(TREE_H) info.h info-b.def info-k.def \ - info-w.def target.h bad.h bad.def where.h $(GLIMITS_H) top.h lex.h \ - type.h lab.h storag.h symbol.h symbol.def equiv.h global.h name.h \ - intrin.h intrin.def implic.h stu.h sta.h stamp-str -stv.o: stv.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) stv.h lab.h com.h \ - com-rt.def $(TREE_H) bld.h bld-op.def bit.h malloc.h info.h info-b.def \ - info-k.def info-w.def target.h bad.h bad.def where.h $(GLIMITS_H) top.h \ - lex.h type.h intrin.h intrin.def symbol.h symbol.def equiv.h storag.h \ - global.h name.h -stw.o: stw.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) stw.h bld.h bld-op.def \ - bit.h malloc.h com.h com-rt.def $(TREE_H) info.h info-b.def info-k.def \ - info-w.def target.h bad.h bad.def where.h $(GLIMITS_H) top.h lex.h \ - type.h lab.h storag.h symbol.h symbol.def equiv.h global.h name.h \ - intrin.h intrin.def stv.h sta.h stamp-str -symbol.o: symbol.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) symbol.h \ - symbol.def bld.h bld-op.def bit.h malloc.h com.h com-rt.def $(TREE_H) \ - info.h info-b.def info-k.def info-w.def target.h bad.h bad.def \ - where.h $(GLIMITS_H) top.h lex.h type.h lab.h storag.h intrin.h \ - intrin.def equiv.h global.h name.h src.h st.h -target.o: target.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) $(GLIMITS_H) \ - target.h $(TREE_H) bad.h bad.def where.h top.h malloc.h info.h \ - info-b.def info-k.def info-w.def type.h lex.h -top.o: top.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) top.h malloc.h where.h \ - $(GLIMITS_H) bad.h bad.def bit.h bld.h bld-op.def com.h com-rt.def \ - $(TREE_H) info.h info-b.def info-k.def info-w.def target.h lex.h type.h \ - lab.h storag.h symbol.h symbol.def equiv.h global.h name.h intrin.h \ - intrin.def data.h expr.h implic.h src.h st.h $(FLAGS_H) $(TOPLEV_H) -type.o: type.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) type.h malloc.h -version.o: version.c -where.o: where.c proj.h $(CONFIG_H) $(SYSTEM_H) $(ASSERT_H) where.h $(GLIMITS_H) \ - top.h malloc.h lex.h $(GGC_H) - -stamp-str: str-1t.h str-1t.j str-2t.h str-2t.j \ - str-fo.h str-fo.j str-io.h str-io.j str-nq.h str-nq.j \ - str-op.h str-op.j str-ot.h str-ot.j - touch stamp-str - -str-1t.h str-1t.j: fini str-1t.fin - ./fini `echo $(srcdir)/str-1t.fin | sed 's,^\./,,'` str-1t.j str-1t.h - -str-2t.h str-2t.j: fini str-2t.fin - ./fini `echo $(srcdir)/str-2t.fin | sed 's,^\./,,'` str-2t.j str-2t.h - -str-fo.h str-fo.j: fini str-fo.fin - ./fini `echo $(srcdir)/str-fo.fin | sed 's,^\./,,'` str-fo.j str-fo.h - -str-io.h str-io.j: fini str-io.fin - ./fini `echo $(srcdir)/str-io.fin | sed 's,^\./,,'` str-io.j str-io.h - -str-nq.h str-nq.j: fini str-nq.fin - ./fini `echo $(srcdir)/str-nq.fin | sed 's,^\./,,'` str-nq.j str-nq.h - -str-op.h str-op.j: fini str-op.fin - ./fini `echo $(srcdir)/str-op.fin | sed 's,^\./,,'` str-op.j str-op.h - -str-ot.h str-ot.j: fini str-ot.fin - ./fini `echo $(srcdir)/str-ot.fin | sed 's,^\./,,'` str-ot.j str-ot.h - -fini: fini.o proj-h.o - $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o fini fini.o proj-h.o - -fini.o: - $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \ - `echo $(srcdir)/fini.c | sed 's,^\./,,'` -o $@ - -# Like proj.o, but depends on hconfig.h instead of config.h. -proj-h.o: proj.c proj.h $(HCONFIG_H) $(SYSTEM_H) $(ASSERT_H) $(GLIMITS_H) - $(HOST_CC) -c -DUSE_HCONFIG $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \ - `echo $(srcdir)/proj.c | sed 's,^\./,,'` -o $@ - -# This rule is just a handy way to build the g77 derived files without -# having the gcc source tree around. -g77-only: force - if [ -f g77.texi ] ; then \ - (cd ..; $(MAKE) srcdir=. HOST_CC=cc HOST_CFLAGS=-g -f f/Make-lang.in f77.rebuilt); \ - else \ - $(MAKE) srcdir=. HOST_CC=cc HOST_CFLAGS=-g -f f/Make-lang.in f77.rebuilt; \ - fi - -# -# These exist for maintenance purposes. - -# Update the tags table. -TAGS: force - cd $(srcdir)/f ; \ - etags *.c *.h ; \ - echo 'l' | tr 'l' '\f' >> TAGS ; \ - etags -a ../*.h ../*.c; - -.PHONY: none all all.indirect f77.rebuilt compiler native deps-kinda g77-only TAGS force - -force: diff --git a/gcc/f/config-lang.in b/gcc/f/config-lang.in index d68334de467..8189641228e 100644 --- a/gcc/f/config-lang.in +++ b/gcc/f/config-lang.in @@ -33,5 +33,3 @@ compilers="f771\$(exeext)" stagestuff="g77\$(exeext) g77-cross\$(exeext) f771\$(exeext)" diff_excludes="-x f/BUGS -x f/NEWS -x f/INSTALL -x f/intdoc.texi" - -outputs=f/Makefile diff --git a/gcc/java/ChangeLog b/gcc/java/ChangeLog index 53408cf3977..78d2cf851b0 100644 --- a/gcc/java/ChangeLog +++ b/gcc/java/ChangeLog @@ -1,3 +1,15 @@ +2000-10-27 Zack Weinberg + + * Make-lang.in: Move all build rules here from Makefile.in, + adapt to new context. Wrap all rules that change the current + directory in parentheses. Expunge all references to $(P). + When one command depends on another and they're run all at + once, use && to separate them, not ;. Add OUTPUT_OPTION to + all object-file generation rules. Delete obsolete variables. + + * Makefile.in: Delete. + * config-lang.in: Delete outputs= line. + 2000-10-24 Tom Tromey * lex.c (java_new_lexer): Initialize new fields. Work around diff --git a/gcc/java/Make-lang.in b/gcc/java/Make-lang.in index 5429f127d1c..d1f794af74a 100644 --- a/gcc/java/Make-lang.in +++ b/gcc/java/Make-lang.in @@ -40,12 +40,6 @@ # - making any compiler driver (eg: g++) # - the compiler proper (eg: jc1) # - define the names for selecting the language in LANGUAGES. -# -# Extra flags to pass to recursive makes. -JAVA_FLAGS_TO_PASS = \ - "JAVA_FOR_BUILD=$(JAVA_FOR_BUILD)" \ - "JAVAFLAGS=$(JAVAFLAGS)" \ - "JAVA_FOR_TARGET=$(JAVA_FOR_TARGET)" # Actual names to use when installing a native compiler. JAVA_INSTALL_NAME = `t='$(program_transform_name)'; echo gcj | sed $$t` @@ -53,11 +47,11 @@ JAVA_INSTALL_NAME = `t='$(program_transform_name)'; echo gcj | sed $$t` # Actual names to use when installing a cross-compiler. JAVA_CROSS_NAME = `t='$(program_transform_cross_name)'; echo gcj | sed $$t` -# GCJ = gcj # Define the names for selecting java in LANGUAGES. -java: jc1$(exeext) $(GCJ)$(exeext) jvgenmain$(exeext) gcjh$(exeext) jv-scan$(exeext) jcf-dump$(exeext) +java: jc1$(exeext) $(GCJ)$(exeext) jvgenmain$(exeext) \ + gcjh$(exeext) jv-scan$(exeext) jcf-dump$(exeext) # Define the name of target independant tools to be installed in $(bindir) # Names are subject to changes @@ -66,21 +60,9 @@ JAVA_TARGET_INDEPENDENT_BIN_TOOLS = gcjh jv-scan jcf-dump # Tell GNU make to ignore these if they exist. .PHONY: java -# Remember to keep this list in sync with JAVA_OBJS in Makefile.in!!! -# -JAVA_SRCS = $(srcdir)/java/parse.y $(srcdir)/java/class.c \ - $(srcdir)/java/decl.c $(srcdir)/java/expr.c $(srcdir)/java/constants.c \ - $(srcdir)/java/lang.c $(srcdir)/java/typeck.c $(srcdir)/java/except.c \ - $(srcdir)/java/verify.c $(srcdir)/java/zextract.c $(srcdir)/java/jcf-io.c \ - $(srcdir)/java/jcf-parse.c $(srcdir)/java/mangle.c \ - $(srcdir)/java/jcf-write.c $(srcdir)/java/buffer.c \ - $(srcdir)/java/check-init.c $(srcdir)/java/lex.c $(srcdir)/java/boehm.c \ - $(srcdir)/java/jcf-depend.c $(srcdir)/java/jcf-path.c \ - $(srcdir)/java/java-tree.h - jvspec.o: $(srcdir)/java/jvspec.c system.h $(GCC_H) $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) \ - $(INCLUDES) $(srcdir)/java/jvspec.c + $(INCLUDES) $(srcdir)/java/jvspec.c $(OUTPUT_OPTION) # Create the compiler driver for $(GCJ). $(GCJ)$(exeext): gcc.o jvspec.o version.o \ @@ -93,64 +75,68 @@ $(GCJ)-cross$(exeext): $(GCJ)$(exeext) -rm -f $(GCJ)-cross$(exeext) cp $(GCJ)$(exeext) $(GCJ)-cross$(exeext) -# Dependencies here must be kept in sync with dependencies in Makefile.in. -jvgenmain$(exeext): $(srcdir)/java/jvgenmain.c $(srcdir)/java/mangle.c \ - $(LIBDEPS) $(TREE_H) - cd java && $(MAKE) $(LANG_FLAGS_TO_PASS) $(JAVA_FLAGS_TO_PASS) ../jvgenmain$(exeext) +$(INTL_TARGETS): $(srcdir)/java/parse.c $(srcdir)/java/parse-scan.c -# This must be kept in sync with dependencies in Makefile.in. -GCJH_SOURCES = $(srcdir)/java/gjavah.c $(srcdir)/java/jcf-io.c \ - $(srcdir)/java/zextract.c $(srcdir)/java/jcf-reader.c \ - $(srcdir)/java/jcf.h $(srcdir)/java/javaop.h \ - $(srcdir)/java/javaop.def $(srcdir)/java/jcf-depend.c \ - $(srcdir)/java/jcf-path.c +$(srcdir)/java/parse.c: $(srcdir)/java/parse.y + (cd $(srcdir)/java && \ + $(BISON) -t --name-prefix=java_ $(BISONFLAGS) -o p$$$$.c parse.y && \ + mv -f p$$$$.c parse.c) -$(INTL_TARGETS): $(srcdir)/java/parse.c $(srcdir)/java/parse-scan.c +$(srcdir)/java/parse-scan.c: $(srcdir)/java/parse-scan.y + (cd $(srcdir)/java && \ + $(BISON) -t $(BISONFLAGS) -o ps$$$$.c parse-scan.y && \ + mv -f ps$$$$.c parse-scan.c) + +$(srcdir)/java/keyword.h: $(srcdir)/java/keyword.gperf + (cd $(srcdir)/java || exit 1; \ + gperf -L C -F ', 0' -p -t -j1 -i 1 -g -o -N java_keyword -k1,3,$$ \ + keyword.gperf > k$$$$.h || { + echo "Please update gperf from ftp://ftp.gnu.org/pub/gnu/gperf/" >&2; \ + rm -f k$$$$.h; \ + exit 1; } \ + mv -f k$$$$.h keyword.gperf) + +# Executables built by this Makefile: +JAVA_OBJS = java/parse.o java/class.o java/decl.o java/expr.o \ + java/constants.o java/lang.o java/typeck.o java/except.o java/verify.o \ + java/zextract.o java/jcf-io.o java/jcf-parse.o java/mangle.o \ + java/jcf-write.o java/buffer.o java/check-init.o java/jcf-depend.o \ + java/jcf-path.o java/xref.o java/boehm.o mkdeps.o + +GCJH_OBJS = java/gjavah.o java/jcf-io.o java/jcf-depend.o java/jcf-path.o \ + java/zextract.o version.o mkdeps.o errors.o + +JVSCAN_OBJS = java/parse-scan.o java/jv-scan.o version.o + +JCFDUMP_OBJS = java/jcf-dump.o java/jcf-io.o java/jcf-depend.o java/jcf-path.o \ + java/zextract.o errors.o version.o mkdeps.o + +JVGENMAIN_OBJS = java/jvgenmain.o java/mangle.o + +# Use loose warnings for this front end. +java-warn = + +jc1$(exeext): $(JAVA_OBJS) $(BACKEND) $(LIBDEPS) + rm -f $@ + $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ \ + $(JAVA_OBJS) $(BACKEND) $(ZLIB) $(LIBS) + +gcjh$(exeext): $(GCJH_OBJS) $(LIBDEPS) + rm -f $@ + $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(GCJH_OBJS) $(ZLIB) $(LIBS) + +jv-scan$(exeext): $(JVSCAN_OBJS) $(LIBDEPS) + rm -f $@ + $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(JVSCAN_OBJS) $(LIBS) + +jcf-dump$(exeext): $(JCFDUMP_OBJS) $(LIBDEPS) + rm -f $@ + $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(JCFDUMP_OBJS) $(ZLIB) $(LIBS) + +jvgenmain$(exeext): $(JVGENMAIN_OBJS) $(LIBDEPS) + rm -f $@ + $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(JVGENMAIN_OBJS) $(LIBS) -# Separating PARSE_DIR from PARSE_RELDIR lets us easily change the -# code to support building parse.c in the build directory, at some -# expense in readability. -# This code must be kept in sync with Makefile.in. -PARSE_DIR = $(srcdir)/java -PARSE_RELDIR = . -PARSE_C = $(PARSE_DIR)/parse.c -PARSE_SCAN_C = $(PARSE_DIR)/parse-scan.c - -SET_BISON = here=`pwd`; sdir=`cd $(srcdir) && pwd`; if test -f ../bison; then bison="$$here/../bison/bison -L $$sdir"; else bison=bison; fi -BISONFLAGS = -JAVABISONFLAGS = --name-prefix=java_ - -$(PARSE_C): $(srcdir)/java/parse.y - $(SET_BISON); \ - cd $(PARSE_DIR) ; $$bison -t $(BISONFLAGS) $(JAVABISONFLAGS) \ - -o p$$$$.c $(PARSE_RELDIR)/parse.y ; \ - mv -f p$$$$.c parse.c -$(PARSE_SCAN_C): $(srcdir)/java/parse-scan.y - $(SET_BISON); \ - cd $(PARSE_DIR) ; $$bison -t $(BISONFLAGS) -o ps$$$$.c \ - $(PARSE_RELDIR)/parse-scan.y ; \ - mv -f ps$$$$.c parse-scan.c - -# This must be kept in sync with dependencies in Makefile.in. -JV_SCAN_SOURCES = $(srcdir)/java/parse-scan.y $(srcdir)/java/lex.c \ - $(srcdir)/java/parse.h $(srcdir)/java/lex.h $(srcdir)/java/jv-scan.c - -# This must be kept in sync with dependencies in Makefile.in. -JCF_DUMP_SOURCES = $(srcdir)/java/jcf-dump.c $(srcdir)/java/jcf-io.c \ - $(srcdir)/java/zextract.c $(TREE_H) - -jc1$(exeext) gcjh$(exeext) jv-scan$(exeext) jcf-dump$(exeext): s-java - -s-java: $(P) $(JAVA_SRCS) $(LIBDEPS) $(BACKEND) mkdeps.o \ - $(GCJH_SOURCES) $(LIBDEPS) $(TREE_H) \ - $(JV_SCAN_SOURCES) $(BACKEND) $(LIBDEPS) \ - $(JCF_DUMP_SOURCES) - cd java; $(MAKE) $(LANG_FLAGS_TO_PASS) $(JAVA_FLAGS_TO_PASS) \ - ../jc1$(exeext) \ - ../gcjh$(exeext) \ - ../jv-scan$(exeext) \ - ../jcf-dump$(exeext) - touch s-java # # Build hooks: @@ -228,10 +214,73 @@ java.stage4: stage4-start # This target creates the files that can be rebuilt, but go in the # distribution anyway. It then copies the files to the distdir directory. -java.distdir: +java.distdir: java/parse.c java/hash.h mkdir tmp/java - cd java ; $(MAKE) $(LANG_FLAGS_TO_PASS) $(JAVA_FLAGS_TO_PASS) parse.c hash.h cd java; \ for file in *[0-9a-zA-Z+]; do \ ln $$file ../tmp/java >/dev/null 2>&1 || cp $$file ../tmp/java; \ done + +# +# .o:.h dependencies. +JAVA_TREE_H = $(TREE_H) java/java-tree.h java/java-tree.def +JAVA_LEX_C = java/lex.c java/keyword.h + +java/parse.o: java/parse.c java/jcf-reader.c $(CONFIG_H) system.h \ + function.h $(JAVA_TREE_H) $(JAVA_LEX_C) java/parse.h java/lex.h $(GGC_H) +java/jcf-dump.o: $(CONFIG_H) system.h $(JAVA_TREE_H) java/jcf-dump.c \ + java/jcf-reader.c java/jcf.h java/javaop.h java/javaop.def version.h +java/gjavah.o: $(CONFIG_H) system.h $(JAVA_TREE_H) java/gjavah.c \ + java/jcf-reader.c java/jcf.h java/javaop.h version.h +java/boehm.o: java/boehm.c $(CONFIG_H) system.h $(TREE_H) $(JAVA_TREE_H) \ + java/parse.h +java/buffer.o: java/buffer.c $(CONFIG_H) java/buffer.h gansidecl.h \ + system.h toplev.h +java/check-init.o: java/check-init.c $(CONFIG_H) gansidecl.h \ + $(JAVA_TREE_H) system.h toplev.h +java/class.o: java/class.c $(CONFIG_H) $(JAVA_TREE_H) $(RTL_H) java/jcf.h \ + java/parse.h gansidecl.h toplev.h system.h output.h $(GGC_H) +java/constants.o: java/constants.c $(CONFIG_H) $(JAVA_TREE_H) java/jcf.h \ + toplev.h system.h $(GGC_H) +java/decl.o: java/decl.c $(CONFIG_H) $(JAVA_TREE_H) java/jcf.h \ + toplev.h system.h function.h defaults.h gcc.h +java/except.o: java/except.c $(CONFIG_H) $(JAVA_TREE_H) java/jcf.h real.h \ + $(RTL_H) java/javaop.h java/java-opcodes.h except.h java/java-except.h \ + eh-common.h toplev.h system.h function.h +java/expr.o: java/expr.c $(CONFIG_H) $(JAVA_TREE_H) java/jcf.h real.h \ + $(RTL_H) $(EXPR_H) java/javaop.h java/java-opcodes.h except.h \ + java/java-except.h java/java-except.h java/parse.h toplev.h \ + system.h $(GGC_H) +java/jcf-depend.o: java/jcf-depend.c $(CONFIG_H) system.h java/jcf.h +java/jcf-parse.o: java/jcf-parse.c $(CONFIG_H) $(JAVA_TREE_H) flags.h \ + input.h java/java-except.h system.h toplev.h java/parse.h $(GGC_H) +java/jcf-write.o: java/jcf-write.c $(CONFIG_H) $(JAVA_TREE_H) java/jcf.h \ + $(RTL_H) java/java-opcodes.h java/parse.h java/buffer.h system.h \ + toplev.h $(GGC_H) +java/jv-scan.o: java/jv-scan.c $(CONFIG_H) system.h version.h +java/jvgenmain.o: java/jvgenmain.c $(CONFIG_H) $(JAVA_TREE_H) system.h +java/lang.o: java/lang.c $(CONFIG_H) $(JAVA_TREE_H) java/jcf.h input.h \ + toplev.h system.h $(RTL_H) $(EXPR_H) +java/mangle.o: java/mangle.c $(CONFIG_H) java/jcf.h $(JAVA_TREE_H) system.h \ + toplev.h $(GGC_H) +java/parse-scan.o: $(CONFIG_H) system.h toplev.h $(JAVA_LEX_C) java/parse.h \ + java/lex.h +java/typeck.o: java/typeck.c $(CONFIG_H) $(JAVA_TREE_H) java/jcf.h \ + java/convert.h toplev.h system.h $(GGC_H) +java/verify.o: java/verify.c $(CONFIG_H) $(JAVA_TREE_H) java/jcf.h \ + java/javaop.h java/java-opcodes.h java/java-except.h toplev.h system.h +java/xref.o: java/xref.c java/xref.h $(CONFIG_H) $(JAVA_TREE_H) toplev.h \ + system.h +java/zextract.o: java/zextract.c $(CONFIG_H) system.h java/zipfile.h + +# jcf-io.o needs $(ZLIBINC) added to cflags. +java/jcf-io.o: java/jcf-io.c $(CONFIG_H) system.h $(JAVA_TREE_H) + $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(ZLIBINC) \ + $(srcdir)/java/jcf-io.c $(OUTPUT_OPTION) + +# jcf-path.o needs a -D. +java/jcf-path.o: java/jcf-path.c $(CONFIG_H) system.h java/jcf.h + $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ + -DLIBGCJ_ZIP_FILE='"$(libgcj_zip)"' \ + $(srcdir)/java/jcf-path.c $(OUTPUT_OPTION) + diff --git a/gcc/java/Makefile.in b/gcc/java/Makefile.in deleted file mode 100644 index 8b57cbe830a..00000000000 --- a/gcc/java/Makefile.in +++ /dev/null @@ -1,329 +0,0 @@ -# Makefile for GNU compiler for the Java(TM) language. -# Copyright (C) 1987, 1988, 1990, 1991, 1992, 1993, 1994, 1995, 1998, -# 1999 Free Software Foundation, Inc. - -#This file is part of GNU CC. - -#GNU CC is free software; you can redistribute it and/or modify -#it under the terms of the GNU General Public License as published by -#the Free Software Foundation; either version 2, or (at your option) -#any later version. - -#GNU CC is distributed in the hope that it will be useful, -#but WITHOUT ANY WARRANTY; without even the implied warranty of -#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#GNU General Public License for more details. - -#You should have received a copy of the GNU General Public License -#along with GNU CC; see the file COPYING. If not, write to -#the Free Software Foundation, 59 Temple Place - Suite 330, -#Boston, MA 02111-1307, USA. - -#Java and all Java-based marks are trademarks or registered trademarks -#of Sun Microsystems, Inc. in the United States and other countries. -#The Free Software Foundation is independent of Sun Microsystems, Inc. - -# The makefile built from this file lives in the language subdirectory. -# Its purpose is to provide support for: -# -# 1) recursion where necessary, and only then (building .o's), and -# 2) building and debugging cc1 from the language subdirectory, and -# 3) nothing else. -# -# The parent makefile handles all other chores, with help from the -# language makefile fragment, of course. -# -# The targets for external use are: -# all, TAGS, ???mostlyclean, ???clean. - -# Suppress smart makes who think they know how to automake Yacc files -.y.c: - -# Variables that exist for you to override. -# See below for how to change them for certain systems. - -# Various ways of specifying flags for compilations: -# CFLAGS is for the user to override to, e.g., do a bootstrap with -O2. -# BOOT_CFLAGS is the value of CFLAGS to pass -# to the stage2 and stage3 compilations -# XCFLAGS is used for most compilations but not when using the GCC just built. -XCFLAGS = -CFLAGS = -g -BOOT_CFLAGS = -O $(CFLAGS) -# These exists to be overridden by the x-* and t-* files, respectively. -X_CFLAGS = -T_CFLAGS = - -X_CPPFLAGS = -T_CPPFLAGS = - -CC = @CC@ -SET_BISON = here=`pwd`; sdir=`cd $(srcdir) && pwd`; if test -f ../../bison; then bison="$$here/../../bison/bison -L $$sdir"; else bison=bison; fi -BISONFLAGS = -JAVABISONFLAGS = --name-prefix=java_ -AR = ar -AR_FLAGS = rc -SHELL = /bin/sh -MAKEINFO = makeinfo -TEXI2DVI = texi2dvi - -# Define this as & to perform parallel make on a Sequent. -# Note that this has some bugs, and it seems currently necessary -# to compile all the gen* files first by hand to avoid erroneous results. -P = - -# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET. -# It omits XCFLAGS, and specifies -B./. -# It also specifies -B$(tooldir)/ to find as and ld for a cross compiler. -GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) - -# Tools to use when building a cross-compiler. -# These are used because `configure' appends `cross-make' -# to the makefile when making a cross-compiler. - -# We don't use cross-make. Instead we use the tools -# from the build tree, if they are available. -# program_transform_name and objdir are set by configure.in. -program_transform_name = -objdir = . - -#version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < $(srcdir)/version.c` -#mainversion=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c` - -# Directory where sources are, from where we are. -srcdir = @srcdir@ -VPATH = @srcdir@ - -# Directory holding libgcj.zip. -prefix = @prefix@ -datadir = @datadir@ -libgcj_zip = $(datadir)/libgcj.zip - -# Additional system libraries to link with. -CLIB= - -# Top build directory, relative to here. -top_builddir = .. - -# Internationalization library. -INTLLIBS = @INTLLIBS@ - -# Choose the real default target. -ALL=all - -# End of variables for you to override. - -# Definition of `all' is here so that new rules inserted by sed -# do not specify the default target. -all: all.indirect - -# This tells GNU Make version 3 not to put all variables in the environment. -.NOEXPORT: - -# sed inserts variable overrides after the following line. -####target overrides -@target_overrides@ -####host overrides -@host_overrides@ -####cross overrides -@cross_overrides@ -####build overrides -@build_overrides@ -####site overrides -# -# Now figure out from those variables how to compile and link. - -all.indirect: Makefile ../jc1$(exeext) ../jcf-dump$(exeext) \ - ../jvgenmain$(exeext) ../gcjh$(exeext) ../jv-scan$(exeext) - -# IN_GCC tells obstack.h that we are using gcc's file. -INTERNAL_CFLAGS = $(CROSS) -DIN_GCC @extra_c_flags@ - -# This is the variable actually used when we compile. -ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) $(XCFLAGS) -W -Wall - -# Likewise. -ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS) - -# This is where we get libiberty.a from. -LIBIBERTY = ../../libiberty/libiberty.a - -# This is where we get zlib from. zlibdir is -L../../zlib by default, -# and is nothing when configured with --enable-system-zlib. -ZLIB = @zlibdir@ -lz - -# How to link with both our special library facilities -# and the system's installed libraries. -LIBS = $(ZLIB) $(INTLLIBS) $(LIBIBERTY) $(CLIB) -LIBDEPS = $(INTLLIBS) $(LIBIBERTY) ../errors.o - -# Specify the directories to be searched for header files. -# Both . and srcdir are used, in that order, -# so that tm.h and config.h will be found in the compilation -# subdirectory rather than in the source directory. -INCLUDES = -I. -I.. -I$(srcdir) -I$(srcdir)/.. -I$(srcdir)/../config -I$(srcdir)/../../include @zlibinc@ - -# Always use -I$(srcdir)/config when compiling. -.c.o: - $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $< - -# -# Lists of files for various purposes. - -# Language-specific object files for Gcc/Java: - -# Remember to keep this list in sync with JAVA_SRCS in Make-lang.in!!! -# -JAVA_OBJS = parse.o class.o decl.o expr.o constants.o lang.o typeck.o \ - except.o verify.o zextract.o jcf-io.o jcf-parse.o mangle.o jcf-write.o \ - buffer.o check-init.o jcf-depend.o jcf-path.o xref.o boehm.o - -JAVA_OBJS_LITE = parse-scan.o jv-scan.o - -# Language-independent object files. -BACKEND = ../toplev.o ../mkdeps.o ../libbackend.a - -compiler: ../jc1$(exeext) ../jv-scan$(exeext) -../jc1$(exeext): $(P) $(JAVA_OBJS) $(BACKEND) $(LIBDEPS) - rm -f ../jc1$(exeext) - $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(JAVA_OBJS) $(BACKEND) $(LIBS) -../jv-scan$(exeext): $(P) $(JAVA_OBJS_LITE) ../version.o $(LIBDEPS) - rm -f ../jv-scan$(exeext) - $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(JAVA_OBJS_LITE) ../version.o $(LIBS) - -../jcf-dump$(exeext): jcf-dump.o jcf-io.o jcf-depend.o jcf-path.o \ - zextract.o ../version.o ../mkdeps.o $(LIBDEPS) - $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ jcf-dump.o jcf-io.o \ - jcf-depend.o jcf-path.o zextract.o ../errors.o ../version.o \ - ../mkdeps.o $(LIBS) - -# Dependencies here must be kept in sync with dependencies in Make-lang.in. -../jvgenmain$(exeext): jvgenmain.o mangle.o $(LIBDEPS) - $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ jvgenmain.o mangle.o $(LIBS) - -../gcjh$(exeext): gjavah.o jcf-io.o jcf-depend.o jcf-path.o \ - zextract.o ../version.o ../mkdeps.o $(LIBDEPS) - $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gjavah.o jcf-io.o \ - jcf-depend.o jcf-path.o zextract.o ../errors.o ../version.o \ - ../mkdeps.o $(LIBS) - -Makefile: $(srcdir)/Makefile.in $(srcdir)/../configure - cd ..; $(SHELL) config.status - -native: config.status ../jc1$(exeext) -# -# Compiling object files from source files. -TREE_H = $(srcdir)/../tree.h $(srcdir)/../real.h $(srcdir)/../tree.def \ - $(srcdir)/../machmode.h $(srcdir)/../machmode.def ../tree-check.h -JAVA_TREE_H = $(TREE_H) java-tree.h java-tree.def -RTL_H = $(srcdir)/../rtl.h $(srcdir)/../rtl.def \ - $(srcdir)/../machmode.h $(srcdir)/../machmode.def ../genrtl.h -EXPR_H = $(srcdir)/../expr.h ../insn-codes.h - -# Separating PARSE_DIR from PARSE_RELDIR lets us easily change the -# code to support building parse.c in the build directory, at some -# expense in readability. -# This code must be kept in sync with Make-lang.in. -PARSE_DIR = $(srcdir) -PARSE_RELDIR = . -PARSE_C = $(PARSE_DIR)/parse.c -PARSE_SCAN_C = $(PARSE_DIR)/parse-scan.c -PARSE_H = $(srcdir)/parse.h - -$(PARSE_C): $(srcdir)/parse.y - $(SET_BISON); \ - cd $(PARSE_DIR) ; $$bison -t $(BISONFLAGS) $(JAVABISONFLAGS) \ - -o p$$$$.c $(PARSE_RELDIR)/parse.y ; \ - mv -f p$$$$.c parse.c -$(PARSE_SCAN_C): $(srcdir)/parse-scan.y - $(SET_BISON); \ - cd $(PARSE_DIR) ; $$bison -t $(BISONFLAGS) -o ps$$$$.c \ - $(PARSE_RELDIR)/parse-scan.y ; \ - mv -f ps$$$$.c parse-scan.c - -lex.c: keyword.h lex.h - -lang.o: $(srcdir)/java-tree.def - -keyword.h: keyword.gperf - gperf -L C -F ', 0' -p -t -j1 -i 1 -g -o -N java_keyword -k1,3,$$ \ - keyword.gperf > keyword.h || ( \ - echo "Please update your 'gperf' from ftp://ftp.gnu.org/pub/gnu/gperf/" >&2 ; \ - exit 1 ) - -jcf-path.o : jcf-path.c $(CONFIG_H) $(srcdir)/../system.h jcf.h - $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ - -DLIBGCJ_ZIP_FILE='"$(libgcj_zip)"' $(srcdir)/jcf-path.c - -# These exist for maintenance purposes. - -# Update the tags table. -TAGS: force - cd $(srcdir) ; \ - etags *.c *.h ; \ - echo 'l' | tr 'l' '\f' >> TAGS ; \ - echo 'parse.y,0' >> TAGS ; \ - etags -a ../*.h ../*.c; - -.PHONY: TAGS - -mostlyclean: - rm -f *.o - -clean: mostlyclean - -force: - -parse.o : $(PARSE_C) jcf-reader.c $(CONFIG_H) $(srcdir)/../system.h \ - $(srcdir)/../function.h $(JAVA_TREE_H) $(srcdir)/lex.c $(PARSE_H) \ - $(srcdir)/lex.h $(srcdir)/../ggc.h -jcf-dump.o : $(CONFIG_H) $(srcdir)/../system.h $(JAVA_TREE_H) jcf-dump.c \ - jcf-reader.c jcf.h javaop.h javaop.def $(srcdir)/../version.h -gjavah.o : $(CONFIG_H) $(srcdir)/../system.h $(JAVA_TREE_H) gjavah.c \ - jcf-reader.c jcf.h javaop.h $(srcdir)/../version.h -boehm.o: boehm.c $(CONFIG_H) $(srcdir)/../system.h $(TREE_H) $(JAVA_TREE_H) \ - $(PARSE_H) -buffer.o : buffer.c $(CONFIG_H) buffer.h $(srcdir)/../gansidecl.h \ - $(srcdir)/../system.h $(srcdir)/../toplev.h -check-init.o : check-init.c $(CONFIG_H) $(srcdir)/../gansidecl.h \ - $(JAVA_TREE_H) $(srcdir)/../system.h $(srcdir)/../toplev.h -class.o : class.c $(CONFIG_H) $(JAVA_TREE_H) $(RTL_H) jcf.h $(PARSE_H) \ - $(srcdir)/../gansidecl.h $(srcdir)/../toplev.h $(srcdir)/../system.h \ - $(srcdir)/../output.h $(srcdir)/../ggc.h -constants.o : constants.c $(CONFIG_H) $(JAVA_TREE_H) jcf.h \ - $(srcdir)/../toplev.h $(srcdir)/../system.h $(srcdir)/../ggc.h -decl.o : decl.c $(CONFIG_H) $(JAVA_TREE_H) jcf.h \ - $(srcdir)/../toplev.h $(srcdir)/../system.h $(srcdir)/../function.h \ - $(srcdir)/../defaults.h $(srcdir)/../gcc.h -except.o : except.c $(CONFIG_H) $(JAVA_TREE_H) jcf.h $(srcdir)/../real.h \ - $(RTL_H) javaop.h java-opcodes.h $(srcdir)/../except.h java-except.h \ - $(srcdir)/../eh-common.h $(srcdir)/../toplev.h $(srcdir)/../system.h \ - $(srcdir)/../function.h -expr.o : expr.c $(CONFIG_H) $(JAVA_TREE_H) jcf.h $(srcdir)/../real.h \ - $(RTL_H) $(EXPR_H) javaop.h java-opcodes.h $(srcdir)/../except.h \ - java-except.h java-except.h parse.h $(srcdir)/../toplev.h \ - $(srcdir)/../system.h $(srcdir)/../ggc.h -jcf-depend.o : jcf-depend.c $(CONFIG_H) $(srcdir)/../system.h jcf.h -jcf-io.o : jcf-io.c $(CONFIG_H) $(srcdir)/../system.h $(JAVA_TREE_H) -jcf-parse.o : jcf-parse.c $(CONFIG_H) $(JAVA_TREE_H) $(srcdir)/../flags.h \ - $(srcdir)/../input.h java-except.h $(srcdir)/../system.h \ - $(srcdir)/../toplev.h $(PARSE_H) $(srcdir)/../ggc.h -jcf-write.o : jcf-write.c $(CONFIG_H) $(JAVA_TREE_H) jcf.h $(RTL_H) \ - java-opcodes.h parse.h buffer.h $(srcdir)/../system.h \ - $(srcdir)/../toplev.h $(srcdir)/../ggc.h -jv-scan.o : jv-scan.c $(CONFIG_H) $(srcdir)/../system.h $(srcdir)/../version.h -jvgenmain.o : jvgenmain.c $(CONFIG_H) $(srcdir)/../system.h -lang.o : lang.c $(CONFIG_H) $(JAVA_TREE_H) jcf.h $(srcdir)/../input.h \ - $(srcdir)/../toplev.h $(srcdir)/../system.h $(RTL_H) $(EXPR_H) -mangle.o : mangle.c $(CONFIG_H) jcf.h $(JAVA_TREE_H) $(srcdir)/../system.h \ - $(srcdir)/../toplev.h $(srcdir)/../ggc.h -parse-scan.o : $(CONFIG_H) $(srcdir)/../system.h $(srcdir)/../toplev.h \ - $(srcdir)/lex.c $(PARSE_H) $(srcdir)/lex.h -typeck.o : typeck.c $(CONFIG_H) $(JAVA_TREE_H) jcf.h convert.h \ - $(srcdir)/../toplev.h $(srcdir)/../system.h $(srcdir)/../ggc.h -verify.o : verify.c $(CONFIG_H) $(JAVA_TREE_H) jcf.h javaop.h java-opcodes.h \ - java-except.h $(srcdir)/../toplev.h $(srcdir)/../system.h -xref.o : xref.c xref.h $(CONFIG_H) $(JAVA_TREE_H) $(srcdir)/../toplev.h \ - $(srcdir)/../system.h -zextract.o : zextract.c $(CONFIG_H) $(srcdir)/../system.h zipfile.h - diff --git a/gcc/java/config-lang.in b/gcc/java/config-lang.in index 07f77493037..e7c858af8a0 100644 --- a/gcc/java/config-lang.in +++ b/gcc/java/config-lang.in @@ -36,5 +36,3 @@ language="java" compilers="jc1\$(exeext) jvgenmain\$(exeext)" stagestuff="jc1\$(exeext) gcj\$(exeext) jvgenmain\$(exeext) gcjh\$(exeext) jv-scan\$(exeext) jcf-dump\$(exeext)" - -outputs=java/Makefile diff --git a/gcc/objc/Make-lang.in b/gcc/objc/Make-lang.in index 049c3060aa7..6f19902400e 100644 --- a/gcc/objc/Make-lang.in +++ b/gcc/objc/Make-lang.in @@ -35,18 +35,6 @@ # - making any compiler driver (eg: g++) # - the compiler proper (eg: cc1plus) # - define the names for selecting the language in LANGUAGES. -# -# Extra flags to pass to recursive makes. -OBJC_FLAGS_TO_PASS = \ - "OBJC_FOR_BUILD=$(OBJC_FOR_BUILD)" \ - "OBJCFLAGS=$(OBJCFLAGS)" \ - "OBJC_FOR_TARGET=$(OBJC_FOR_TARGET)" \ - -# Actual names to use when installing a native compiler. -#OBJC_INSTALL_NAME = `t='$(program_transform_name)'; echo c++ | sed $$t` - -# Actual names to use when installing a cross-compiler. -#OBJC_CROSS_NAME = `t='$(program_transform_cross_name)'; echo c++ | sed $$t` # # Define the names for selecting Objective-C in LANGUAGES. @@ -56,10 +44,13 @@ OBJECTIVE-C objective-c: cc1obj$(exeext) # Tell GNU make to ignore these if they exist. .PHONY: objective-c objc ObjC +# Use maximal warnings for this front end. +objc-warn = $(STRICT_WARN) + # Language-specific object files for Objective C. OBJC_OBJS = objc-parse.o objc-act.o $(C_AND_OBJC_OBJS) -cc1obj$(exeext): $(P) $(OBJC_OBJS) $(BACKEND) $(LIBDEPS) +cc1obj$(exeext): $(OBJC_OBJS) $(BACKEND) $(LIBDEPS) $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(OBJC_OBJS) $(BACKEND) $(LIBS) # Objective C language specific files. @@ -70,7 +61,7 @@ objc-parse.o : $(srcdir)/objc/objc-parse.c \ $(srcdir)/input.h $(srcdir)/flags.h $(srcdir)/output.h \ $(srcdir)/objc/objc-act.h system.h cpplib.h $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -I$(srcdir)/objc \ - -c $(srcdir)/objc/objc-parse.c + -c $(srcdir)/objc/objc-parse.c $(OUTPUT_OPTION) $(INTL_TARGETS): $(srcdir)/objc/objc-parse.c $(srcdir)/objc/objc-parse.c : $(srcdir)/objc/objc-parse.y @@ -132,8 +123,8 @@ objc.distclean: -rm -f objc-parse.output objc.extraclean: objc.maintainer-clean: - -rm -f objc/objc-parse.y - -rm -f objc/objc-parse.c objc/objc-parse.output + -rm -f $(srcdir)/objc/objc-parse.y + -rm -f $(srcdir)/objc/objc-parse.c $(srcdir)/objc/objc-parse.output # # Stage hooks: @@ -156,11 +147,8 @@ objc.stage4: stage4-start # This target creates the files that can be rebuilt, but go in the # distribution anyway. It then copies the files to the distdir directory. -# ??? Note that this should be fixed once the Makefile is fixed to do -# the build in the inner directory. objc.distdir: $(srcdir)/objc/objc-parse.c mkdir tmp/objc -# cd objc ; $(MAKE) $(LANG_FLAGS_TO_PASS) objc-parse.c cd objc; \ for file in *[0-9a-zA-Z+]; do \ ln $$file ../tmp/objc >/dev/null 2>&1 || cp $$file ../tmp/objc; \ diff --git a/gcc/objc/Makefile.in b/gcc/objc/Makefile.in deleted file mode 100644 index 71c564c6c59..00000000000 --- a/gcc/objc/Makefile.in +++ /dev/null @@ -1,73 +0,0 @@ -# GNU Objective C frontend Makefile -# Copyright (C) 1993, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. -# -# This file is part of GNU CC. -# -# GNU CC is free software; you can redistribute it and/or modify it under the -# terms of the GNU General Public License as published by the Free Software -# Foundation; either version 2, or (at your option) any later version. -# -# GNU CC is distributed in the hope that it will be useful, but WITHOUT ANY -# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more -# details. -# -# You should have received a copy of the GNU General Public License along with -# GNU CC; see the file COPYING. If not, write to the Free Software -# Foundation, 59 Temple Place - Suite 330, -# Boston, MA 02111-1307, USA. - -# The Makefile built from this file lives in the objc language subdirectory. -# Its purpose is to provide support for: -# -# 1. recursion where necessary, and only then (building .o's), and -# 2. building and debugging cc1objc from the language subdirectory. -# -# The parent Makefile handles all other chores, with help from the language -# Makefile fragment. -# -# The targets for external use are `all' and `mostlyclean'. - -SHELL=/bin/sh - -OPTIMIZE= -O - -srcdir = . -VPATH = $(srcdir) - -AR = ar -AR_FLAGS = rc - -# Define this as & to perform parallel make on a Sequent. -# Note that this has some bugs, and it seems currently necessary -# to compile all the gen* files first by hand to avoid erroneous results. -P = - -# Definition of `all' is here so that new rules inserted by sed -# do not specify the default target. -all: all.indirect - -# sed inserts variable overrides after the following line. -####target overrides -####host overrides -####cross overrides -####build overrides -# - -# Now figure out from those variables how to compile and link. -all.indirect: Makefile frontend - -frontend: - cd ..; $(MAKE) cc1obj$(exeext) - -Makefile: $(srcdir)/Makefile.in $(srcdir)/../configure - cd ..; $(SHELL) config.status - -mostlyclean: - -rm -f *.o xforward fflags -clean: mostlyclean -distclean: mostlyclean -extraclean: mostlyclean - -# For Sun VPATH. - -- 2.30.2