From b8db17af9233ca23c5cd3b11e1a152d62ec771e9 Mon Sep 17 00:00:00 2001 From: Janis Johnson Date: Tue, 15 Oct 2002 15:52:33 +0000 Subject: [PATCH] install.texi: Formatting changes for conformance to HTML 4.01. 2002-10-15 Janis Johnson * doc/install.texi: Formatting changes for conformance to HTML 4.01. From-SVN: r58164 --- gcc/ChangeLog | 4 + gcc/doc/install.texi | 240 +++++++++++++++---------------------------- 2 files changed, 86 insertions(+), 158 deletions(-) diff --git a/gcc/ChangeLog b/gcc/ChangeLog index 85c94510d40..a65f6cf27e1 100644 --- a/gcc/ChangeLog +++ b/gcc/ChangeLog @@ -1,3 +1,7 @@ +2002-10-15 Janis Johnson + + * doc/install.texi: Formatting changes for conformance to HTML 4.01. + 2002-10-15 Ulrich Weigand PR opt/7409 diff --git a/gcc/doc/install.texi b/gcc/doc/install.texi index 1c27024c1ae..060a4e4a28e 100644 --- a/gcc/doc/install.texi +++ b/gcc/doc/install.texi @@ -191,7 +191,7 @@ not yet been merged into the main part of this manual. @end ifhtml @html -
+

@end html @ifhtml @@ -245,7 +245,7 @@ components of the binutils you intend to build alongside the compiler @file{opcodes}, @dots{}) to the directory containing the GCC sources. @html -

+

@end html @ifhtml @@ -362,7 +362,6 @@ subdirectory of @var{objdir} or vice versa. These additional options control where certain parts of the distribution are installed. Normally you should not need to use these options. @table @code - @item --exec-prefix=@var{dirname} Specify the toplevel installation directory for architecture-dependent files. The default is @file{@var{prefix}}. @@ -646,7 +645,6 @@ predefined set of them. Some targets provide finer-grained control over which multilibs are built (e.g., @option{--disable-softfloat}): @table @code - @item arc-*-elf* biendian. @@ -911,7 +909,7 @@ Note that each @option{--enable} option has a corresponding corresponding @option{--without} option. @html -

+

@end html @ifhtml @@ -1153,7 +1151,7 @@ Currently, when compiling the Ada front end, you cannot use the parallel build feature described in the previous section. @html -

+

@end html @ifhtml @@ -1311,7 +1309,7 @@ few failing testcases are possible even on released versions and you should look here first if you think your results are unreasonable. @html -

+

@end html @ifhtml @@ -1423,7 +1421,7 @@ Free Software Foundation}, though such manuals may not be for the most recent version of GCC@. @html -

+

@end html @ifhtml @@ -1519,7 +1517,7 @@ bootstrapping the compiler. An updated version of that disk is in the works. @html -

+

@end html @ifhtml @@ -1702,7 +1700,7 @@ GNU Compiler Collection on your machine. @html -

+
@end html @heading @anchor{alpha*-*-*}alpha*-*-* @@ -1717,8 +1715,7 @@ debugging information, not the least of which is incorrect linking of shared libraries. @html -

-
+
@end html @heading @anchor{alpha*-dec-osf*}alpha*-dec-osf* Systems using processors that implement the DEC Alpha architecture and @@ -1802,8 +1799,7 @@ DBX@. DEC is now aware of this problem with the assembler and hopes to provide a fix shortly. @html -

-
+
@end html @heading @anchor{alphaev5-cray-unicosmk*}alphaev5-cray-unicosmk* Cray T3E systems running Unicos/Mk. @@ -1830,16 +1826,14 @@ be able to work around this by doing @samp{make all} after getting this failure. @html -

-
+
@end html @heading @anchor{arc-*-elf}arc-*-elf Argonaut ARC processor. This configuration is intended for embedded systems. @html -

-
+
@end html @heading @anchor{arm-*-aout}arm-*-aout Advanced RISC Machines ARM-family processors. These are often used in @@ -1851,23 +1845,20 @@ You may need to make a variant of the file @file{arm.h} for your particular configuration. @html -

-
+
@end html @heading @anchor{arm-*-elf}arm-*-elf This configuration is intended for embedded systems. @html -

-
+
@end html @heading @anchor{arm*-*-linux-gnu}arm*-*-linux-gnu We require GNU binutils 2.10 or newer. @html -

-
+
@end html @heading @anchor{avr}avr @@ -1904,8 +1895,7 @@ The following error: indicates that you should upgrade to a newer version of the binutils. @html -

-
+
@end html @heading @anchor{c4x}c4x @@ -1935,8 +1925,7 @@ can also be obtained from: @end itemize @html -

-
+
@end html @heading @anchor{cris}CRIS @@ -1974,8 +1963,7 @@ information about this platform is available at @uref{http://developer.axis.com/}. @html -

-
+
@end html @heading @anchor{dos}DOS @@ -1987,15 +1975,13 @@ compilation package DJGPP, which includes binaries as well as sources, and includes all the necessary compilation tools and libraries. @html -

-
+
@end html @heading @anchor{dsp16xx}dsp16xx A port to the AT&T DSP1610 family of processors. @html -

-
+
@end html @heading @anchor{*-*-freebsd*}*-*-freebsd* @@ -2043,8 +2029,7 @@ the very least, both boehm-gc and libffi. Shared @file{libgcc_s.so} is now built and installed by default. @html -

-
+
@end html @heading @anchor{h8300-hms}h8300-hms Hitachi H8/300 series of processors. @@ -2057,8 +2042,7 @@ first three arguments in function calls in registers. Structures are no longer a multiple of 2 bytes. @html -

-
+
@end html @heading @anchor{hppa*-hp-hpux*}hppa*-hp-hpux* @@ -2093,8 +2077,7 @@ default scheduling model is desired. More specific information to @samp{hppa*-hp-hpux*} targets follows. @html -

-
+
@end html @heading @anchor{hppa*-hp-hpux9}hppa*-hp-hpux9 @@ -2110,8 +2093,7 @@ and @env{SHELL} to @file{/bin/ksh} in your environment. @html -

-
+
@end html @heading @anchor{hppa*-hp-hpux10}hppa*-hp-hpux10 @@ -2142,8 +2124,7 @@ bootstrap}. @html -

-
+
@end html @heading @anchor{hppa*-hp-hpux11}hppa*-hp-hpux11 @@ -2182,16 +2163,14 @@ have been problems reported with various binary distributions. This port still is undergoing significant development. @html -

-
+
@end html @heading @anchor{i370-*-*}i370-*-* This port is very preliminary and has many known bugs. We hope to have a higher-quality port for this machine soon. @html -

-
+
@end html @heading @anchor{*-*-linux-gnu}*-*-linux-gnu @@ -2201,7 +2180,6 @@ The patch @uref{glibc-2.2.patch,,glibc-2.2.patch}, that is to be applied in the GCC source tree, fixes the compatibility problems. @html -

@end html @html @@ -2218,8 +2196,7 @@ glibc 2.2.4 whether patches for GCC 3.0 are needed. You can use glibc 2.2.3 with GCC 3.0, just do not try to recompile it. @html -

-
+
@end html @heading @anchor{ix86-*-linux*aout}i?86-*-linux*aout Use this configuration to generate @file{a.out} binaries on Linux-based @@ -2227,8 +2204,7 @@ GNU systems. This configuration is being superseded. You must use gas/binutils version 2.5.2 or later. @html -

-
+
@end html @heading @anchor{ix86-*-linux*}i?86-*-linux* @@ -2239,23 +2215,20 @@ possible you have a hardware problem. Further information on this can be found on @uref{http://www.bitwizard.nl/sig11/,,www.bitwizard.nl}. @html -

-
+
@end html @heading @anchor{ix86-*-sco}i?86-*-sco Compilation with RCC is recommended. Also, it may be a good idea to link with GNU malloc instead of the malloc that comes with the system. @html -

-
+
@end html @heading @anchor{ix86-*-sco3.2v4}i?86-*-sco3.2v4 Use this configuration for SCO release 3.2 version 4. @html -

-
+
@end html @heading @anchor{ix86-*-sco3.2v5*}i?86-*-sco3.2v5* Use this for the SCO OpenServer Release 5 family of operating systems. @@ -2330,8 +2303,7 @@ engineering and will hopefully be addressed in later releases. @html -

-
+
@end html @heading @anchor{ix86-*-udk}i?86-*-udk @@ -2367,8 +2339,7 @@ have installed. @html -

-
+
@end html @heading @anchor{ia64-*-linux}ia64-*-linux IA-64 processor (also known as IPF, or Itanium Processor Family) @@ -2392,8 +2363,7 @@ GCC 3.0.2 is believed to be fully ABI compliant, and hence no more major ABI changes are expected. @html -

-
+
@end html @heading @anchor{*-lynx-lynxos}*-lynx-lynxos LynxOS 2.2 and earlier comes with GCC 1.x already installed as @@ -2404,8 +2374,7 @@ COFF format object files and executables; otherwise GCC will use the installed tools, which produce @file{a.out} format executables. @html -

-
+
@end html @heading @anchor{*-ibm-aix*}*-ibm-aix* @@ -2514,8 +2483,7 @@ A default can be specified with the @option{-mcpu=@var{cpu_type}} switch and using the configure option @option{--with-cpu-@var{cpu_type}}. @html -

-
+
@end html @heading @anchor{ip2k-*-elf}ip2k-*-elf Ubicom IP2022 micro controller. @@ -2525,16 +2493,14 @@ There are no standard Unix configurations. Use @samp{configure --target=ip2k-elf --enable-languages=c} to configure GCC@. @html -

-
+
@end html @heading @anchor{m32r-*-elf}m32r-*-elf Mitsubishi M32R processor. This configuration is intended for embedded systems. @html -

-
+
@end html @heading @anchor{m68000-hp-bsd}m68000-hp-bsd HP 9000 series 200 running BSD@. Note that the C compiler that comes @@ -2542,24 +2508,21 @@ with this system cannot compile GCC; contact @email{law@@cygnus.com} to get binaries of GCC for bootstrapping. @html -

-
+
@end html @heading @anchor{m6811-elf}m6811-elf Motorola 68HC11 family micro controllers. These are used in embedded applications. There are no standard Unix configurations. @html -

-
+
@end html @heading @anchor{m6812-elf}m6812-elf Motorola 68HC12 family micro controllers. These are used in embedded applications. There are no standard Unix configurations. @html -

-
+
@end html @heading @anchor{m68k-att-sysv}m68k-att-sysv AT&T 3b1, a.k.a.@: 7300 PC@. This version of GCC cannot @@ -2569,8 +2532,7 @@ bootstrap. Binaries are available from the OSU-CIS archive, at @uref{ftp://archive.cis.ohio-state.edu/pub/att7300/}. @html -

-
+
@end html @heading @anchor{m68k-crds-unos}m68k-crds-unos Use @samp{configure unos} for building on Unos. @@ -2609,8 +2571,7 @@ If linking @file{cc1} fails, try putting the object files into a library and linking from that library. @html -

-
+
@end html @heading @anchor{m68k-hp-hpux}m68k-hp-hpux HP 9000 series 300 or 400 running HP-UX@. HP-UX version 8.0 has a bug in @@ -2668,8 +2629,7 @@ to look like: @html -

-
+
@end html @heading @anchor{m68k-ncr-*}m68k-ncr-* On the Tower models 4@var{n}0 and 6@var{n}0, by default a process is not @@ -2685,8 +2645,7 @@ MAXUMEM = 4096 @html -

-
+
@end html @heading @anchor{m68k-sun}m68k-sun Sun 3. We do not provide a configuration file to use the Sun FPA by @@ -2694,8 +2653,7 @@ default, because programs that establish signal handlers for floating point traps inherently cannot work with the FPA@. @html -

-
+
@end html @heading @anchor{m68k-sun-sunos4.1.1}m68k-sun-sunos4.1.1 @@ -2703,8 +2661,7 @@ It is reported that you may need the GNU assembler on this platform. @html -

-
+
@end html @heading @anchor{mips-*-*}mips-*-* If on a MIPS system you get an error message saying ``does not have gp @@ -2759,8 +2716,7 @@ however, you may have success with @command{smake} on IRIX 5.2 if you do not have GNU @command{make} available. @html -

-
+
@end html @heading @anchor{mips-sgi-irix6}mips-sgi-irix6 @@ -2859,8 +2815,7 @@ See @uref{http://freeware.sgi.com/,,http://freeware.sgi.com/} for more information about using GCC on IRIX platforms. @html -

-
+
@end html @heading @anchor{powerpc*-*-*}powerpc-*-* @@ -2868,8 +2823,7 @@ You can specify a default version for the @option{-mcpu=@var{cpu_type}} switch by using the configure option @option{--with-cpu-@var{cpu_type}}. @html -

-
+
@end html @heading @anchor{powerpc-*-darwin*}powerpc-*-darwin* PowerPC running Darwin (Mac OS X kernel). @@ -2902,15 +2856,13 @@ number of extensions not available in a standard GCC release. These extensions are generally specific to Mac programming. @html -

-
+
@end html @heading @anchor{powerpc-*-elf}powerpc-*-elf, powerpc-*-sysv4 PowerPC system in big endian mode, running System V.4. @html -

-
+
@end html @heading @anchor{powerpc-*-linux-gnu*}powerpc-*-linux-gnu* @@ -2919,8 +2871,7 @@ You will need or newer for a working GCC@. @html -

-
+
@end html @heading @anchor{powerpc-*-netbsd*}powerpc-*-netbsd* PowerPC system in big endian mode running NetBSD@. To build the @@ -2928,74 +2879,64 @@ documentation you will need Texinfo version 4.1 (NetBSD 1.5.1 included Texinfo version 3.12). @html -

-
+
@end html @heading @anchor{powerpc-*-eabiaix}powerpc-*-eabiaix Embedded PowerPC system in big endian mode with @option{-mcall-aix} selected as the default. @html -

-
+
@end html @heading @anchor{powerpc-*-eabisim}powerpc-*-eabisim Embedded PowerPC system in big endian mode for use in running under the PSIM simulator. @html -

-
+
@end html @heading @anchor{powerpc-*-eabi}powerpc-*-eabi Embedded PowerPC system in big endian mode. @html -

-
+
@end html @heading @anchor{powerpcle-*-elf}powerpcle-*-elf, powerpcle-*-sysv4 PowerPC system in little endian mode, running System V.4. @html -

-
+
@end html @heading @anchor{powerpcle-*-eabisim}powerpcle-*-eabisim Embedded PowerPC system in little endian mode for use in running under the PSIM simulator. @html -

-
+
@end html @heading @anchor{powerpcle-*-eabi}powerpcle-*-eabi Embedded PowerPC system in little endian mode. @html -

-
+
@end html @heading @anchor{powerpcle-*-winnt}powerpcle-*-winnt, powerpcle-*-pe PowerPC system in little endian mode running Windows NT@. @html -

-
+
@end html @heading @anchor{s390-*-linux*}s390-*-linux* S/390 system running Linux for S/390@. @html -

-
+
@end html @heading @anchor{s390x-*-linux*}s390x-*-linux* zSeries system (64-bit) running Linux for zSeries@. @html -

-
+
@end html @c Please use Solaris 2 to refer to all release of Solaris, starting @c with 2.0 until 2.6, 7, and 8. Solaris 1 was a marketing name for @@ -3048,8 +2989,7 @@ There are patches for Solaris 2.6 (105633-56 or newer for SPARC, 108653-22 for Intel) that fix this bug. @html -

-
+
@end html @heading @anchor{sparc-sun-solaris2*}sparc-sun-solaris2* @@ -3084,8 +3024,7 @@ that supports only 32-bit binaries, one must configure with 64-bit target libraries. @html -

-
+
@end html @heading @anchor{sparc-sun-solaris2.7}sparc-sun-solaris2.7 @@ -3127,7 +3066,7 @@ the Solaris 7 Recommended Patch Cluster. @html

-

+
@end html @heading @anchor{sparc-sun-sunos4*}sparc-sun-sunos4* @@ -3146,8 +3085,7 @@ be due to a bug in @command{sh}. You can probably get around it by running @command{make}. @html -

-
+
@end html @heading @anchor{sparc-unknown-linux-gnulibc1}sparc-unknown-linux-gnulibc1 @@ -3157,8 +3095,7 @@ for this platform, too. @html -

-
+
@end html @heading @anchor{sparc-*-linux*}sparc-*-linux* @@ -3168,8 +3105,7 @@ releases mishandled unaligned relocations on @code{sparc-*-*} targets. @html -

-
+
@end html @heading @anchor{sparc64-*-*}sparc64-*-* @@ -3180,8 +3116,7 @@ invocation with an environment that causes @command{configure} to recognize (via @samp{uname -a}) the system as @samp{sparc-*-*} instead. @html -

-
+
@end html @heading @anchor{sparcv9-*-solaris2*}sparcv9-*-solaris2* @@ -3196,8 +3131,7 @@ step in order to bootstrap this target with the Sun compiler: specifies the v9 architecture to the Sun linker and assembler. @html -

-
+
@end html @heading @anchor{#*-*-sysv*}*-*-sysv* On System V release 3, you may get this error message @@ -3231,16 +3165,14 @@ On a System V release 4 system, make sure @file{/usr/bin} precedes @file{/usr/ucb} uses libraries which have bugs. @html -

-
+
@end html @heading @anchor{vax-dec-ultrix}vax-dec-ultrix Don't try compiling with VAX C (@code{vcc}). It produces incorrect code in some cases (for example, when @code{alloca} is used). @html -

-
+
@end html @heading @anchor{xtensa-*-elf}xtensa-*-elf @@ -3258,8 +3190,7 @@ downloaded files include a customized copy of this header file, which you can use to replace the default header file. @html -

-
+
@end html @heading @anchor{xtensa-*-linux*}xtensa-*-linux* @@ -3271,8 +3202,7 @@ respects, this target is the same as the @uref{#xtensa-*-elf,,@samp{xtensa-*-elf}} target. @html -

-
+
@end html @heading @anchor{windows}Microsoft Windows (32-bit) @@ -3283,8 +3213,7 @@ Current (as of early 2001) snapshots of GCC will build under Cygwin without modification. @html -

-
+
@end html @heading @anchor{os2}OS/2 @@ -3297,8 +3226,7 @@ An older copy of GCC 2.8.1 is included with the EMX tools available at ftp://ftp.leo.org/pub/comp/os/os2/leo/devtools/emx+gcc/}. @html -

-
+
@end html @heading @anchor{older}Older systems @@ -3344,8 +3272,7 @@ about GCC on such systems (which may no longer be applicable to current GCC) is to be found in the GCC texinfo manual. @html -

-
+
@end html @heading @anchor{elf_targets}all ELF targets (SVR4, Solaris 2, etc.) @@ -3356,8 +3283,7 @@ automatically. @html -

-
+

@end html @ifhtml @@ -3369,8 +3295,7 @@ automatically. @ifset oldhtml @include install-old.texi @html -

-
+

@end html @ifhtml @@ -3382,8 +3307,7 @@ automatically. @ifset gfdlhtml @include fdl.texi @html -

-
+

@end html @ifhtml -- 2.30.2