From bb7628b30c124bcc93a32bd6798913a30678b6fc Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 19 May 2015 16:21:48 +0200 Subject: [PATCH] configs: rename atmel_xplained_defconfig For consistency, rename atmel_xplained_defconfig to atmel_sama5d3_xplained_mmc_defconfig as this configuration supports booting the sama5d3 Xplained with an MMC card (as opposed to the NAND flash). Signed-off-by: Alexandre Belloni Signed-off-by: Thomas Petazzoni --- board/atmel/xplained/readme.txt | 8 ++++---- ...ned_defconfig => atmel_sama5d3_xplained_mmc_defconfig} | 0 2 files changed, 4 insertions(+), 4 deletions(-) rename configs/{atmel_xplained_defconfig => atmel_sama5d3_xplained_mmc_defconfig} (100%) diff --git a/board/atmel/xplained/readme.txt b/board/atmel/xplained/readme.txt index 63744dde9c..7919c606e8 100644 --- a/board/atmel/xplained/readme.txt +++ b/board/atmel/xplained/readme.txt @@ -10,19 +10,19 @@ web site. Note that the default Buildroot configuration is prepared to boot from an SD card: the first stage bootloader, second stage bootloader, kernel image and root filesystem are all located on the SD card. Some -adjustements in the bootloader configuration will be needed to boot -from NAND flash. +adjustments in the bootloader configuration will be needed to boot +from NAND flash, see board/atmel/nandflash.txt Configuring and building Buildroot ---------------------------------- - make atmel_xplained_defconfig + make atmel_sama5d3_xplained_mmc_defconfig make Preparing the SD card --------------------- -The SD card must be partitionned with at least two partitions: one +The SD card must be partitioned with at least two partitions: one FAT16 partition for the bootloaders, kernel image and Device Tree blob, and one ext4 partition for the root filesystem. To partition the SD card: diff --git a/configs/atmel_xplained_defconfig b/configs/atmel_sama5d3_xplained_mmc_defconfig similarity index 100% rename from configs/atmel_xplained_defconfig rename to configs/atmel_sama5d3_xplained_mmc_defconfig -- 2.30.2